Complete this sentence. If the cone of force is facing an observer, the impact comes from the ________ side of the observer.

left
same
right
opposite

You could do to make the magnetic disk rotate faster: regular usage of a disc defragmentation program.

A magnetic disk is a storage device that writes, rewrites, and accesses data using the magnetization process. It has a magnetic layer that retains data as tracks, spots, and sectors.

You could do to make the magnetic disk rotate faster:

Learn more about magnetic disk  here:

https://brainly.com/question/29910303

#SPJ1

The height formed by this 25-foot ladder that leans against a wall is 24 feet.

To find out how far up a wall a ladder will reach, you can use the Pythagorean theorem. The Pythagorean theorem states that in a right triangle, the square of the length of the hypotenuse (the side opposite the right angle) is equal to the sum of the squares of the other two sides. In this case, the ladder forms one side of the triangle, the wall forms another side, and the distance between the base of the ladder and the wall forms the hypotenuse.

Let's call the height of the wall h. Using the Pythagorean theorem, we can set up the following equation:

(25 ft)^2 = h^2 + (7 ft)^2

625 = h^2 + 49

576 = h^2

h = sqrt(576) = 24 ft

Therefore, a 25 ft ladder that is 7 feet from the wall will reach 24 feet up the wall.

Learn more about determining the height of a ladder based on its length and the distance of its base from a wall here: https://brainly.com/question/13734303

#SPJ4

Electric shock occurs when a person comes into contact with a current flowing through an electrical circuit.

What do you mean by "electric shock"?

Electric shock occurs when a person comes into contact with a current flowing through an electrical circuit. This can happen when the person comes into contact with a live conductor, such as a wire carrying an electrical current, or when the person becomes part of the circuit, such as by touching both a live wire and a ground.

Electric shock can cause a range of symptoms depending on the severity and duration of the exposure, including muscle contractions, burns, internal injuries, and in severe cases, cardiac arrest or death. Electric shocks can also cause electrical burns which can be serious.

When a person comes into contact with a current, it can cause an electric shock, which can range in severity from a mild tingling sensation to severe injury or death. Factors that determine the severity of an electric shock include the amount of current flowing through the body, the duration of contact with the current, and the path the current takes through the body.

It is important to note that Electric shock can be prevented by following safety guidelines and by using proper safety equipment when working with electrical equipment and circuits.

Hence, Electric shock occurs when a person comes into contact with a current flowing through an electrical circuit.

To learn more about electric shock from the given link:

https://brainly.com/question/14980202

#SPJ4

A force on the free-body diagram above which represents the normal force acting on the car include the following: D. Force A.

In Science, a free-body diagram can be defined as a graphical illustration which is typically used in the field of science to visualize moments, tension, and applied forces that are acting on an isolated or rigid object (body), while using arrows to point in the direction of these forces.

Since this car was driven to the right, with a large amount of air resistance acting on it, and its engine provides the forward motion, we can reasonably infer and logically deduce that the normal force which is acting on the car is represented by Force A as illustrated by the free-body diagram shown in the image attached above.

Read more on free-body diagram here: https://brainly.com/question/18770265

#SPJ1

Answer:

Planets are bodies of rock or gas that are named after ancient gods.

Asteroids and Meteoroids are made of rock or metal, which often collide with Earth.

The terrestrial planets are more like the Earth.

The Juno spacecraft is exploring the planet Jupiter.

Explanation:

The planets and other stars in our solar system were similarly baptized. The planets were named after ancient gods. Other stars were baptized with names chosen by scientists or according to their peculiarity. Most of the planets were baptized by ancient Chinese astronomers, and later, by Babylonians. But over time different civilizations changed the names of the planets.

An asteroid is a smaller body in the solar system, usually on the order of just a few hundred kilometers. Meteoroids, in turn, are fragments of rocks that form from comets and asteroids. The luminous effect is produced when fragments of celestial bodies ignite in contact with the Earth's atmosphere due to friction. Both asteroids and meteoroids are made of rock or metal, which often collide with Earth.

The terrestrial planets are the most similar to the earth. These planets are those formed mainly by rocks and metals, have a solid surface without the incidence of rings, as is the case with Mercury, Venus and Mars.

The Juno spacecraft is exploring the planet Jupiter. This probe has already given us several unprecedented discoveries about the largest gas giant in the Solar System, in addition to sending us sensational images showing the complex and beautiful atmosphere of the planet.

The impulse applied to the soccer ball by the soccer player is the combined force and time of the kick applied to the ball.

What do you mean by Impulse?

Impulse is an instantaneous force applied to an object, resulting in a change in the object's momentum. It is a vector quantity, which means that it has both magnitude and direction. Impulse is the product of a force applied to an object for a certain period of time. It is calculated as the product of the average force applied multiplied by the time period over which the force is applied. For example, when a ball is hit with a bat, the force of the bat is applied to the ball for a certain amount of time, resulting in an impulse which causes the ball to move.

1. Calculate the change in momentum of the soccer ball:

Change in momentum = Final Momentum - Initial Momentum

                                      = 7 kg m/s - 5 kg m/s

                                      = 2 kg m/s

2. Calculate the impulse:

Impulse = Change in Momentum

             = 2 kg m/s

Therefore, the impulse applied by the soccer player to the soccer ball is 2 kg m/s.

To know more about impulse,

https://brainly.com/question/29787329

#SPJ4

According to the equation wavelength = speed/frequency, the dolphin's sound has a 42 m wavelength.

The distance between two identification based (consecutive crests) in adjoining cycles of a waveform signal as it travels across space or along wire is known as its wavelength. In wireless systems, this length is frequently specified in metres (m), centimetres (cm), or millimeters (mm). The numbers of times per second that a sound waves wave repeats is its frequency, which is often referred to as its pitch.

Given data -

speed = 1,470 m/s

frequency = 35 Hz

wavelength = speed / frequency

wavelength = 1,470 / 35

wavelength = 42 m.

To know more about wavelength visit :-

https://brainly.com/question/7143261

#SPJ4

Answer:

222m/s

Explanation:

The speed of a wave is calculated using the forumula:

v = fλ

Lets substitute in our values:

v = 37 × 6

Which is equal to

v = 222m/s

The girl should sit 2.14 m from the center to keep the board in equilibrium.

What is equilibrium?

Equilibrium is a state in which the net force and net torque acting on an object are both equal to zero. This means that the object is either at rest or moving at a constant velocity. In other words, the object is not accelerating or rotating.

In order for the board to be in equilibrium, the sum of the forces acting on it must be equal to zero. Since the board is uniform and supported at the center, the only forces acting on it are the weights of the person and the girl.

To find the distance from the center that the girl should sit, we can set up the following equation:

F_net = 0 = (500 N)(1.5 m) - (350 N)(x)

where F_net is the net force acting on the board, x is the distance from the center where the girl is sitting, and the 1.5 m is the distance from the center where the person is sitting.

Solving this equation for x:

x = (500 N)(1.5 m) / 350 N = 2.14 m

Hence, the girl should sit 2.14 m from the center to keep the board in equilibrium.

To learn more about equilibrium from the given link:

https://brainly.com/question/1041717

#SPJ4

When two unequal masses are dropped simultaneously from the same height, then both masses will experience the same change in D: velocity.

Velocity is the prime indicator of the position and the rapidity of the object. It can be described as the distance covered by an object in a unit of time. It means that velocity is the displacement of the object in unit time. When in the case where two objects with unequal masses are dropped simultaneously from the same height, both masses will attain the same change in velocity.

You can learn more about Velocity at

https://brainly.com/question/25749514

#SPJ4

The wavelength of the electromagnetic radiation needed to remove an electron from the valence shell of an atom of the element is 2.7522m.

The electromagnetic (EM) field's waves, which travel across space carrying momentum and electromagnetic radiant energy, make up electromagnetic radiation (EMR). It consists of X-rays, gamma rays, microwaves, infrared, visible light, ultraviolet, and radio waves. These waves are all components of the electromagnetic spectrum.

We are given that,

Speed of light = c = 299 792 458 m

The frequency of  electron = f = 1.09 × 10⁸ s⁻¹

The following equation can be used to determine the wavelength of a radio wave

Wavelength = λ = c/f

λ = c/f

λ =  299 792 458 m/s/ 1.09 × 10⁸ s⁻¹

λ = 2.7522m

Therefore the wavelength of the electromagnetic radiation would be 2.7522m.

To know more about wavelength

https://brainly.com/question/1263539

#SPJ4

The ball's initial speed as it descended straight down from a height was 17.5 miles per hour.

The starting velocity is the speed at time t = 0. (u). It is the speed at which motion first becomes apparent. Four equations can be used to calculate initial velocity: (1) If time, acceleration, and end velocity are known, the initial velocity can be calculated using the formula u = v - at.

v² - u² = 2 × a × s

here, v = final velocity = 7.5 m/s

a = 9.81 m/s^2

s = 2.0 m

Solving for u (initial velocity) we get:

(7.5)² - u² = 2 × 9.8 × 2

56.25 - u² = 39.2

u² = 56.25 - 39.2

u² = 17.05

To know more about velocity visit:-

https://brainly.com/question/18084516

#SPJ4

The driver of a car traveling at 30.2 m/s applies the brakes and undergoes a constant deceleration of 1.4 m/s 2 . The car makes 139 revolutions.

A change in velocity that does not alter over time is referred to as a constant acceleration. A car's average acceleration stays constant at 20 mph per minute even if it increases its speed by 20 mph in one minute and another 20 mph the next.

Acceleration in the direction crosswise to the direction of the velocity is always referred to as deceleration. Deceleration always slows down motion. However, negative acceleration is just acceleration in the opposite direction according to the selected coordinate system.

Given:

v₀ = 30 m/s

v = 0 m/s

a = -1.4 m/s²

Find: Δx

v² = v₀² + 2aΔx

(0 m/s)

² = (30 m/s)

² + 2 (-1.4 m/s²) Δx

Δx = 321.43 m

The tires' circumference is 2 m plus 0.37 m, or 2.32 m. Therefore:

139 rev = 321.43 m (1 rev / 2.32 m)

To learn more about constant deceleration from given link

https://brainly.com/question/14442456

#SPJ4

The similarities and differences between static stretching and dynamic stretching are the dynamic stretch is a style of stretching that is more strenuous and physically stimulating, while the static stretch is a form of stretching that is slower and more relaxing.

Another difference between static and dynamic stretching is that after a dynamic stretch, you may feel stronger and have more muscle endurance and speed, whereas static stretching before an exercise diminishes these same qualities; To get the most out of your workout, perform dynamic stretching before you begin, and static stretching afterward. Static and dynamic stretching have similar benefits in lowering the risk of injury by increasing flexibility, balance, and body awareness.

To learn more about dynamic and statistic stretch click here:

https://brainly.com/question/14635799

#SPJ4

The magnitude of the net electric field is 2.7 x 10^9 N/C, and the direction is away from the positive charge and towards the negative charge.

The magnitude of the electric field due to the positive charge at the midpoint is:

E = k * q / r^2

E = (9.0 x 10^9 N * m^2/C^2) * (20.0 x 10^-6 C) / (0.20 m)

E = 4.5 x 10^9 N/C

The magnitude of the electric field due to the negative charge at the midpoint is:

E = k * q / r^2

E = (9.0 x 10^9 N * m^2/C^2) * (-8.00 x 10^-6 C) / (0.20 m)

E = -1.8 x 10^9 N/C

The direction of the electric field due to the positive charge is away from the charge, and the direction of the electric field due to the negative charge is towards the charge.

To find the net electric field, we add the vectors of the two electric fields. Since the vectors are in opposite directions, we subtract the negative vector from the positive vector.

E_net = E_positive + E_negative

E_net = (4.5 x 10^9 N/C) + (-1.8 x 10^9 N/C)

E_net = 2.7 x 10^9 N/C

The magnitude of the net electric field is 2.7 x 10^9 N/C, and the direction is away from the positive charge and towards the negative charge.

Learn more about the magnitude of the net electric field here: https://brainly.com/question/29679588

#SPJ4

Answer:

Yes

Explanation:

When humans use land, they change it to accommodate their own needs, and thus new locations and new habitats for other organisms are created. These organisms can now live there and create new organisms, and thus create new ecosystems as a result of human use of that particular piece of land.

The study of computers and computing, encompassing the theoretical and algorithmic underpinnings, hardware and software, and applications for information processing, is known as computer science.

The study of algorithms and data structures, computer and network design, the modelling of data and information processes, and artificial intelligence are all included in the field of computer science. Since mathematics and engineering provide some of the underpinnings for computer science, it integrates concepts from those fields as well as queueing theory, probability and statistics, and electrical circuit design. As new algorithms, information structures, and computer architectures are conceptualised, designed, measured, and improved in computer science, extensive use of hypothesis testing and experimentation is also used.

Computer science is regarded as one of five distinct but related fields, including computer engineering, information systems,  information technology, and software engineering. This family has come to be known collectively as the discipline of computing.

To learn more about computer science visit:

brainly.com/question/20837448

#SPJ4

Answer:

The length of the load arm is 3 m

The length of the effort arm is 15 m

Spoons and scissors are class 1 levers

Explanation:

The data given in the force diagram of the lever (machine) are;

The length of the lever = 18 m = (Length of effort arm) + (Length of load arm)

The force applied at the effort = 100 N

The load lifted by the lever = 500 N

The mechanical advantage, MA is given as follows;

MA = Load/Effort = (Length of effort arm)/(Length of load arm)

∴ MA = 500 N/(100 N) = 5

Let 'x' represent the length of the effort arm, and let 'y', represent the length of the load arm, we have;

x + y = 18...(1) (given)

MA = 5 = x/y

∴ x = 5·y...(2)

Substituting the value of 'x' in equation (1) with x = 5·y gives;

x + y = 5·y + y = 6·y = 18

∴ y = 18/6 = 3

y = 3

The length of the load arm, y = 3 m

x = 5·y = 5 × 3 = 15

x = 15

The length of the effort arm, x = 15 m

When lifting food with a spoon, the fulcrum, which can be taken as the edge of the plate or the supporting finger, is in between bowl of the spoon and the point of application of the thumb towards the extremities of the spoon handle

Therefore a spoon is a class 1 lever

The pivot of a scissors is in between the item being cut (the load) and the holes where the finger applies an effort

Therefore, a scissors is a class 1 lever.

Animals eat seeds, then those seeds are spread by animals.

To know more on interdependence here

https://brainly.com/question/3095398

#SPJ2

Answer:

1. 2HCl + MgO —-> MgCl2 + H2O

Explanation: You add a 2 in front of the HCl in order to have 2 hydrogens on each side and 2 Cl on each side. Since, Magnesium only has one on each side, they’re already balanced. Same with Oxygen so you leave it alone.

The interaction energy for two point charges, q₁ and q₂, a distance 'a' apart is q₁q₂/4πε₀a.

In physics, interaction energy is the contribution to the total energy that is caused by an interaction between the objects being evaluated. The interaction energy generally depends on the relative position of the objects.

For example q₁q₂/4πε₀Δr is the electrostatic interaction energy between two objects with charges q₁ and q₂.

[tex]W_{tot}[/tex] = ε₀/2(∫E²dτ)

= ε₀/2{(∫E₁ + E₂)²dτ}

= ε₀/2(∫E₁² + E₂² + 2E₁E₂)dτ

= W₁ + W₂ + ε₀(∫E₁ × E₂)²dτ

E₁ = 1/4πε₀(q₁/r²)r

E₂ = 1/4πε₀(q₂/ᴫ²)ᴫ

[tex]W_{i}[/tex] = ε₀q₁q₂/(4πε₀)²[∫{(1/r²ᴫ²)cosβr²sinθdrdθdφ}]

Where (from the figure)

ᴫ = √(r² + a² - 2ra cosθ), cosβ = (r - a cosθ)/ᴫ

Therefore

[tex]W_{i}[/tex]  = {q₁q₂/(4π)²ε₀} 2π∫{(r - acosθ)/ᴫ³} sinθ drdθ

First do the r integral first, changing variables to ᴫ:

2ᴫdᴫ = (2r - 2a cosθ)

⇒(r - a cosθ)dr = ᴫdᴫ

As r : 0→∞, ᴫ : a→∞, so

[tex]W_{i}[/tex] = {q₁q₂/8πε₀a} [tex]\int\limits^\pi _0[/tex](∫limit 0 to ∞ 1/ᴫ² dᴫ) sinθ dθ

The ᴫ integral is 1/a, so

[tex]W_{i}[/tex] = {q₁q₂/8πε₀a} [tex]\int\limits^\pi _0[/tex] sinθ dθ

[tex]W_{i}[/tex] = q₁q₂/4πε₀a

This is the exact interaction energy of two-point charges.

To know more about electrostatic, here

https://brainly.com/question/14889552

#SPJ4

Answer:

Greenhouse gases have far-ranging environmental and health effects. They cause climate change by trapping heat, and they also contribute to respiratory disease from smog and air pollution. Extreme weather, food supply disruptions, and increased wildfires are other effects of climate change caused by greenhouse gases.

Explanation:

:) YW

Answer:

according to scientists greenhouse gasses, include co2 which can heat up the climate. cars and factorys creat co2 admission which cause global warming

Accounting for things like how many team members should be assigned to a task, how many resources are required, how many hours tasks will take and more.

When the effort arm is longer than the load arm, there is a significant mechanical advantage.The lever is made up of two “arms”: The load arm (also known as the output arm) is the portion of the lever that is directly attached to the load. The effort arm (or applied force arm) is the section of the lever to which the effort, or input force, is applied.

A= W P = 1 , Where W represents the load and P represents the effort. So, if we utilize one fixed pulley to raise the weight, the effort required will be 50 k g w t in one direction.

To learn more about Effort to refer:

https://brainly.com/question/2141317

#SPJ1

The electroscope must have received a total charge of 2.45 x q if the wires are each at a 26° angle with the vertical.

An electroscope is a scientific tool which is used to find the existence of an electric charge on a body. The first electroscope with a pivoting needle, known as a versorium, was created by British physician William Gilbert in the year 1600.

An electroscope is a piece of equipment used in science to determine whether and how much electric charge is present on a body. There are three traditional electroscope types: the needle electroscope, the gold-leaf electroscope, and the pith-ball electroscope (third). For each of them, we have simulators available.

Equilibrium condition = mgsin∅ = 2.45 x [tex]10^{-6}[/tex]

To learn more about electroscope visit:
brainly.com/question/29073064

#SPJ4

Answer: (C) H2 and N2 would react to produce more Nh3

Explanation:

A p e x

Dynamic stretching helps to prepare the body for an activity by increasing:

Dynamic stretching is a form of stretching that involves active, controlled movements such as swinging, bouncing, and twisting. The goal of dynamic stretching is to improve range of motion and flexibility while preparing the body for physical activity.

Learn more about dynamic stretching:

https://brainly.com/question/24842019

#SPJ4

Since the displacement is a vector quantity, the distance is 11 miles while displacement is 8.5 miles

Displacement is a distance travelled in a specific direction. Distance is a scalar quantity while displacement is a vector quantity.

Given that Stephen has to drive 8 miles south and 3 miles east to get to work.

His distance will be 8 miles + 3 miles = 11 miles

While his displacement can be calculated by using Pythagoras theorem. That is,

Displacement D = √(8² + 3²)

D = √(64 + 9)

D = √73

D = 8.5 miles

Therefore, his distance is 11 miles and his displacement is 8.5 miles.

Learn more about Displacement here: https://brainly.com/question/2109763

#SPJ1

Said Aouita's average speed for the race was 12.089 m/s. To calculate this, we need to divide the total distance (3000 meters) by the total time (7 minutes and 29.45 seconds).

Converting the time to seconds, we get 449.45 seconds.

Therefore,

3000 / 449.45 = 12.089 m/s.

This is an impressive speed for a 3000 m race and it was a new world record at the time. Aouita was the first runner to break the eight minute barrier in the 3000 m, a feat he accomplished in 1987. His world record lasted for almost 3 years until it was broken by Moses Kiptanui in 1992. Aouita's world record is a testament to his incredible speed and endurance.

Learn more about speed:

https://brainly.com/question/26046491

#SPJ4