the displacement is 50 km to the east because it is the shortest distance between the initial and final position. However, the total distance traveled is 150 km.
6. For an object moving with a constant velocity, the distance traveled during equal time intervals is the same. It means that the object covers the same distance after every fixed interval of time. 7. For an object moving with a non-constant velocity, the distance traveled during equal time intervals varies.
It means that the object does not cover the same distance after every fixed interval of time. 8. The speed of running 100 meters in 15 seconds can be found by dividing the distance by the time taken:Speed = Distance / Time= 100 / 15= 6.67 m/s.9. To calculate the speed of running 3000 meters east in 21 minutes in km/min, we need to convert the distance to km and the time to minutes:
Speed = Distance / Time= (3000 m / 1000) / (21 min / 60)= 0.238 km/min. 10. Speed is the rate of change of distance while velocity is the rate of change of displacement. Displacement is the shortest distance between the initial and final position of an object in a particular direction. For example, if a car moves 100 km to the east and then turns back and moves 50 km to the west,
the displacement is 50 km to the east because it is the shortest distance between the initial and final position. However, the total distance traveled is 150 km.
to know more about displacement
https://brainly.com/question/321442
#SPJ11
What is the critical angle for light traveling from crown glass (n=1.52) into water ( n=1.33) ? Just two significant digits please.
The critical angle is 61°. The critical angle is the angle of incidence in the first medium such that the angle of refraction in the second medium is 90 degrees.
Using Snell's law, we have:
n1 sin θc = n2
where
n1 is the refractive index of the first medium (crown glass)
n2 is the refractive index of the second medium (water)
θc is the critical angle
Plugging in the values, we get:
1.52 sin θc = 1.33
θc = sin⁻¹ (1.33/1.52) ≈ 61.1°
To two significant digits, the critical angle is 61°.
To know more about refraction:
https://brainly.com/question/32684646
#SPJ12
If a nonzero torque is applied to a rigid object, that object will experience: a. a constant angular speed. b. an angular acceleration. c. a decreasing moment of inertia. d. an increasing moment of inertia. e. More than one of the answers above is correct
If a nonzero torque is applied to a rigid object, the object will experience an angular acceleration.
When a nonzero torque is applied to a rigid object, it causes the object to rotate or change its rotational motion. The angular acceleration of the object is directly proportional to the applied torque and inversely proportional to the moment of inertia of the object. The moment of inertia represents the object's resistance to changes in its rotational motion.
According to Newton's second law for rotational motion, the net torque acting on an object is equal to the product of its moment of inertia and angular acceleration: τ = Iα. If a nonzero torque is applied to the object, it will cause an angular acceleration, resulting in a change in the object's angular velocity.
The other options can be ruled out:
a. A constant angular speed would occur if the net torque acting on the object is zero, meaning no external torque is applied.
c. and d. The moment of inertia is a physical property of the object and does not change unless the object's mass distribution changes.
e. While it is possible for an object to experience both angular acceleration and a changing moment of inertia in certain situations, the most general and correct answer is that a nonzero torque will cause the object to experience an angular acceleration.
Learn more about angular acceleration here:
https://brainly.com/question/30237820
#SPJ11
24. The air in the cylinder of an air compressor is compressed from 100 kPa to 10 MPa. If the air initially at 100°C, the process is adiabatic,CV=0.707 KJ/Kg.K, y=1.4, the final temperature an work a
24. The final temperature and work for the adiabatic compression of air from 100 kPa to 10 MPa, with an initial temperature of 100°C, are 1390 K and -729 KJ/Kg, respectively.
12. The use of a reheat cycle in steam turbines is to increase the steam temperature.
13. The Carnot cycle has maximum efficiency because all the processes in the cycle are completely reversible.
24. The given problem involves the adiabatic compression of air in an air compressor. The process is adiabatic, which means there is no heat transfer. By applying the adiabatic equation for an ideal gas, we can calculate the final temperature and work. Using the given initial conditions and the adiabatic process equation, the final temperature is determined to be approximately 1390 K, and the work is calculated to be -729 KJ/Kg.
12. A reheat cycle is used in steam turbines to increase the steam temperature. In a reheat cycle, the steam is expanded in a high-pressure turbine, then reheated in a boiler before being expanded in a low-pressure turbine. Reheating increases the average temperature at which the steam enters the low-pressure turbine, resulting in improved efficiency and power output of the turbine.
13. The Carnot cycle has maximum efficiency because all the processes in the cycle are completely reversible. Reversible processes are idealized processes that can be achieved in theory but not in practice. The Carnot cycle is a theoretical construct that consists of reversible processes, both in heat addition and rejection. These reversible processes minimize energy losses due to irreversibilities, resulting in the maximum possible efficiency for a heat engine operating between two temperature reservoirs.
To know more about adiabatic click here:
https://brainly.com/question/30023377
#SPJ11
The complete question is:
24. The air in the cylinder of an air compressor is compressed from 100 kPa to 10 MPa. If the air initially at 100°C, the process is adiabatic,CV=0.707 KJ/Kg.K, y=1.4, the final temperature an work are: Oa) 1400 K, -750 KJ/Kg Ob) 1350 K, -780 KJ/Kg Oc) 1300 K, -732 KJ/Kg Od) 1390 K, -729 KJ/Kg 12. What is the use of reheat cycle in steam turbines? Oa) To increase the steam temperature Ob) To increase steam pressure Oc) None of the above 13. Why does Carnot cycle has maximum efficiency? Oa) Since all the processes in Carnot cycle are completely reversible Ob) Since only process of expansion and compression are reversible Oc) Since only the process of heat addition and heat rejection are reversible Od) Since all processes involved are irreversible
A light object and a heavy object collide head-on and stick together. Which one has the larger momentum change? O Can't tell without knowing the initial velocities. The light object The magnitude of the momentum change is the same for both of them O Can't tell without knowing the final velocities The heavy object
The magnitude of the momentum change is the same for both the light and heavy objects when they collide head-on and stick together.
In an isolated system, the law of conservation of momentum states that the total momentum before a collision is equal to the total momentum after the collision. When the light and heavy objects collide head-on and stick together, their combined mass becomes the mass of the resulting object.
Let's assume the light object has mass m₁ and initial velocity v₁, and the heavy object has mass m₂ and initial velocity v₂. The total momentum before the collision is given by p₁ = m₁ * v₁ + m₂ * v₂.
After the collision, the two objects stick together and move with a common velocity. Let's call this common velocity v₃. The total momentum after the collision is given by p₂ = (m₁ + m₂) * v₃.
Since the total momentum before and after the collision must be equal (according to the conservation of momentum), we have p₁ = p₂, which can be rewritten as m₁ * v₁ + m₂ * v₂ = (m₁ + m₂) * v₃.
From this equation, it is evident that the magnitude of the momentum change for both objects is the same since m₁ * v₁ and m₂ * v₂ are equal to (m₁ + m₂) * v₃.
Learn more about velocity here:
https://brainly.com/question/30559316
#SPJ11
A channel (assume rectangular) has a water depth of 1.9m, a width of 2.1m, a parameters of .04 for mannings number n, and has a value of 7.8m^3/s
a) solve for hydraulic radius and channel slope
b) determine the Froude number and if the flow is super or sub critical
c) If only the depth increases to a value of 2.3, what is the new discharge?
d) At critical flow, what is the depth? (advice: at critical flow h_o = 2/3E
a) Solving for Hydraulic radius and channel slope:
Given:
Depth (d) = 1.9 m
Width (w) = 2.1 m
Manning's number (n) = 0.04
Discharge (Q) = 7.8 m³/s
Hydraulic radius formula:
R = (w * d) / (w + 2d)
Substituting the given values:
R = (2.1 * 1.9) / (2.1 + 2 * 1.9) = 1.40 m
Slope formula:
S = (1 / n) * (Q² / (R^(4/3) * w))
Substituting the given values:
S = (1 / 0.04) * (7.8² / (1.4^(4/3) * 2.1)) = 0.0030 or 0.30%
b) Froude number and if the flow is supercritical or subcritical:
Froude number formula:
Fr = V / √(gD)
Where V is the velocity of flow, g is the gravitational acceleration (9.81 m/s²), and D is the depth of flow.
Substituting the given values:
Fr = Q / (w * d * √(g * d))
We know that the Froude number ranges from <1 to >1, where:
- If Fr < 1, then the flow is subcritical.
- If Fr = 1, then the flow is critical.
- If Fr > 1, then the flow is supercritical.
Substituting the given values, Fr = 0.35 < 1. So, the flow is subcritical.
c) New discharge when depth increases to 2.3 m:
Given:
New depth (d) = 2.3 m
The discharge formula is:
Q = (w * d / n) * R^(2/3) * S^(1/2)
Substituting the given values:
New Q = Q' = (2.1 * 2.3 / 0.04) * 1.4^(2/3) * 0.003^(1/2) = 16.52 m³/s
d) At critical flow, what is the depth?
At critical flow, the depth is given by:
h₀ = (2/3) * R
Substituting the given values:
h₀ = (2/3) * 1.4 = 0.93 m
Thus, the depth at critical flow is 0.93 m.
Learn more about Hydraulic
https://brainly.com/question/31453487
#SPJ11
In which of the following situations might you expect diffraction to be important? Remem- ber to briefly explain how. A: Taking a photograph of a distant star.
B: Seeing a rainbow after a storm. C: Seeing the swirling colors in a soap bubble. D: Seeing stunning colors in the feathers of a bird. E: Measuring the angular dependence of x-ray transmission through a crystal.
The situation that might require diffraction is E) Measuring the angular dependence of x-ray transmission through a crystal.
Diffraction is the deviation of waves, like light, from their course or direction of propagation by the obstacles in their path. Based on this concept, one can assume that diffraction occurs when there is an obstruction in the path of a wave. Let's analyze the given options to find out which situation diffraction is most likely to occur:
A) Taking a photograph of a distant star - In this situation, diffraction might not be essential since there are no barriers present between the camera and the star that can cause any deviation in the path of the light waves.
B) Seeing a rainbow after a storm - When the sunrays pass through water droplets in the air, diffraction of light waves occurs, causing the rainbow.
C) Seeing the swirling colors in a soap bubble - When the light waves enter a soap bubble, the waves encounter the barrier of the bubble wall and diffract in different directions, creating the swirling colors we see.
D) Seeing stunning colors in the feathers of a bird - Diffraction of light occurs when light rays hit the microscopic structures on the feathers that diffract light waves in a way that appears as a range of colors.
E) Measuring the angular dependence of x-ray transmission through a crystal - This method is used to observe diffraction patterns of x-rays through the crystal lattice structure.
Thus, this situation explicitly demands diffraction.
Consequently, from the given options, the situation that might require diffraction is E) Measuring the angular dependence of x-ray transmission through a crystal.
Learn more about diffraction at: https://brainly.com/question/8645206
#SPJ11
Air undergoes a three-process cycle. Find the net work done for 2 kg of air if the processes are 1 - 2: constant-pressure expansion 2-3: constant volume 3 - 1: constant-temperature compression The necessary information is T1 = 100 °C, T2 = 600 °C, and P1 = 200 kPa. Sketch the cycle on a P-V diagram. (This is not a P-V "thunderdome". Draw an x-y, make it V-P, and plot your points on this diagram.)
Therefore, the net work done for 2 kg of air if the processes are 1 - 2: constant-pressure expansion 2-3: constant volume 3 - 1: constant-temperature compression is -1489 kJ.
To find the net work done for 2 kg of air in the given three-process cycle, we need to calculate the work done in each process and then sum them up.
1-2: Constant-pressure expansion
In this process, the pressure is constant (P1 = 200 kPa) and the volume changes. The work done during a constant-pressure expansion is given by:
W = P * ΔV
where P is the constant pressure and ΔV is the change in volume. Since the volume increases in this process, the work done is positive.
2-3: Constant volume
In this process, the volume is constant and the temperature changes. Since the volume does not change, no work is done in this process (W = 0).
3-1: Constant-temperature compression
In this process, the temperature is constant (T1 = 100 °C) and the volume decreases. The work done during a constant-temperature compression is given by:
W = -nRT * ln(V2/V1)
where n is the number of moles of air, R is the ideal gas constant, and V1 and V2 are the initial and final volumes, respectively. Since the volume decreases in this process, the work done is negative.
1-2: Since the pressure is constant, we can assume the ideal gas law holds:
PV = nRT
n = m/M, where m is the mass of air and M is the molar mass of air
V2/V1 = T2/T1
Using these relationships, we can find the final volume V2 and then calculate the work done in this process.
3-1: Since the temperature is constant, we can use the relationship:
V2/V1 = P1/P2
Using these relationships, we can find the final volume V2 and then calculate the work done in this process.
To know more about temperature
https://brainly.com/question/7510619
#SPJ11
A 0.66-m aluminum bar is held with its length parallel to the east-west direction and dropped from a bridge. Just before the bar hits the river below, its speed is 29 m/s, and the emf induced across its length is 6.2×10 −4
V. Assuming the horizontal component of the Earth's magnetic field at the location of the bar points directly north, (a) determine the magnitude of the horizontal component of the Earth's magnetic field, and (b) state whether the east end or the west end of the bar is positive.
The east end of the bar is positive for the magnetic field based on details in the question.
Given data:Length of the aluminum bar, l = 0.66 mSpeed, v = 29 m/sEMF induced,[tex]E = 6.2 * 10^-4[/tex] V(a) To find the magnitude of the horizontal component of the Earth's magnetic field, we use the formula of EMF induced in a conductor moving in a magnetic field. E = Blv
whereB = magnetic field strength, andlis the length of the conductor.The horizontal component of the Earth's magnetic field at the location of the bar points directly north. Hence, the vertical component is perpendicular to it, and the horizontal component is parallel to it.
Therefore, the value of magnetic field strength that we will calculate will be of the horizontal component.EMF induced, E = [tex]6.2 * 10^-4[/tex]VLength of the conductor, l = 0.66 mSpeed, v = 29 m/sB × l × v = EB = E / (lv) = 6.2 × 10-4 / (0.66 × 29)B = [tex]3.045 * 10^-6[/tex]Tesla
Therefore, the magnitude of the horizontal component of the Earth's magnetic field is [tex]3.045 * 10^-6[/tex] Tesla.(b) The right-hand rule can help us determine the direction of the induced current. If you hold your right hand with your fingers pointing in the direction of the velocity, and then curl your fingers toward the magnetic field direction, the direction your thumb is pointing will be the direction of the current.
Using the above rule, we can conclude that the east end of the bar is positive. Therefore, the east end of the bar is positive.
Learn more about magnetic field here:
https://brainly.com/question/19542022
#SPJ11
A standing wave is produced by two identical sinusoidal waves traveling in opposite directions in a taut string. The two waves are given by: y 1
=(0.02 m)sin(5x−10t)
Ay 2
=(0.02 m)sin(5x+10t)
where x and y are in meters, t is in seconds, and the argument of the sine is in radians. Find i. amplitude of the simple harmonic motion of the element on the string located at x=10 cm ii. positions of the nodes and antinodes in the string. iii. maximum and minimum y values of the simple harmonic motion of a string element located at any antinode.
Therefore, the maximum and minimum y values of the simple harmonic motion of a string element located at any antinode are 0.04 m and 0 m respectively.
i. The amplitude of the simple harmonic motion of the element on the string located at x=10 cm. The displacement of the string from its equilibrium position at point x and time t is given by;y(x,t)=y1+y2(0.02m)sin(5x−10t)+0.02m sin(5x+10t)At x=10cm; x=0.1m;y(0.1,t) =0.02sin(5(0.1)−10t)+0.02sin(5(0.1)+10t)=0.04sin(10t) Amplitude of the simple harmonic motion at x=10cm is 0.04 mii. Positions of the nodes and antinodes in the string: The equation of a standing wave of the form y= 2Asin(kx)sin(ωt)for nodes y=0⇒sin(kx)=0⇒kx=nπ⇒x=nπk for antinodes y=±2A⇒sin(kx)=±1⇒kx=(2n−1)π2⇒x=(2n−1)π2kwhere n is any integer, n = 1, 2, 3, …At n=1, λ/2= 1 node 1 (n=1) = (1/2)(1) = 0.5 m node 2 (n=2) = (1/2)(3) = 1.5 m node 3 (n=3) = (1/2)(5) = 2.5 m …At n=1, λ/4= 1 antinode 1 (n=1) = (1/4)(1) = 0.25 m antinode 2 (n=2) = (1/4)(3) = 0.75 m antinode 3 (n=3) = (1/4)(5) = 1.25 m …iii. Maximum and minimum y values of the simple harmonic motion of a string element located at any antinode At any antinode, kx=(2n−1)π2sin(kx)=±1sin[(2n−1)π/2]=±1The displacement of the string from its equilibrium position at point x and time t is given byy(x,t)=y1+y2(0.02m)sin(5x−10t)+0.02m sin(5x+10t)Maximum displacement, y max=y1+y2=0.04mMinimum displacement, y min=y1−y2=0 m (because y2>y1). Therefore, the maximum and minimum y values of the simple harmonic motion of a string element located at any antinode are 0.04 m and 0 m respectively.
To know more about Adjacent antinodes visit:
https://brainly.com/question/14088834
#SPJ11
You make a capacitor by cutting the 12.5-cm-diameter bottoms out of two aluminum pie plates, separating them by 3.40 mm, and connecting them across a 6.00 V battery. You may want to review (Page). For related problem-solving tips and strategies, you may want to view a Video Tutor Solution of Properties of a parallel-plate capacitor. What's the capacitance of your capacitor? Express your answer to three significant figures with the appropriate units. Part B If you disconnect the batfery and separate the plates to a distance of 3.50 cm without discharging them, what will be the potential difference between them?
The separation distance between the plates is 3.40 mm or 0.0034 m. The potential difference between the plates when they are separated by 0.035 m.
(a) To calculate the capacitance of the capacitor, we can use the formula for the capacitance of a parallel-plate capacitor, which is given by C = (ε0 * A) / d, where C is the capacitance, ε0 is the permittivity of free space, A is the area of the plates, and d is the separation distance between the plates. (b) If we disconnect the battery and separate the plates to a distance of 3.50 cm or 0.035 m without discharging them, we can use the formula for the potential difference (V) between the plates in a parallel-plate capacitor, which is given by V = Q / C, where Q is the charge on the plates and C is the capacitance.
(a) The capacitance of the capacitor is determined by the formula C = (ε0 * A) / d, where ε0 is the permittivity of free space, A is the area of the plates, and d is the separation distance between the plates. By substituting the given values into the formula, we can calculate the capacitance to three significant figures.
Given that the diameter of the aluminum pie plates is 12.5 cm, the radius (r) is half of the diameter, which is 6.25 cm or 0.0625 m. The area of each plate can be calculated using the formula A = π * [tex]r^2.[/tex]
The separation distance between the plates is 3.40 mm or 0.0034 m.
(b) When the plates are disconnected from the battery and separated to a distance of 0.035 m, the charge on the plates remains the same. The potential difference between the plates is given by the formula V = Q / C, where Q is the charge on the plates and C is the capacitance. By substituting the capacitance value obtained in part (a) and the charge, we can calculate the potential difference between the plates when they are separated by 0.035 m. Therefore, the potential difference between the plates will change according to the new separation distance.
By using the capacitance value obtained in part (a) and substituting it into the potential difference formula, we can calculate the potential difference between the plates when they are separated by 0.035 m.
Learn more about capacitor here:
https://brainly.com/question/31627158
#SPJ11
A boy kicks a rock off a cliff with a speed of 17.8 m/s at an angle of 57.0° above the horizontal. The rock hits the ground 5.20 s after it was kicked How high is the cliff? 121.40m (126) What is the speed of the rock right before it hits the ground? 51.94m(12c) What is the maximum height of the rock in the air, measured from the top of the cliff? 1.14x10 m
A boy kicks a rock off a cliff with a speed of 17.8 m/s at an angle of 57.0° above the horizontal. the height of the cliff is approximately 121.40 m. the speed of the rock right before it hits the ground is approximately 51.94 m/s.
To solve this problem, we can break it down into three parts: determining the height of the cliff, finding the speed of the rock right before it hits the ground, and calculating the maximum height of the rock.
1.Height of the cliff:
We can use the kinematic equation for vertical motion to find the height of the cliff. The equation is given by:
h = v0y * t - 0.5 * g * t^2
where h is the height, v0y is the initial vertical component of velocity, t is the time of flight, and g is the acceleration due to gravity.
Using the given values, we have:
v0y = 17.8 m/s * sin(57°)
t = 5.20 s
g = 9.8 m/s^2
Substituting these values, we find:
h = (17.8 m/s * sin(57°)) * 5.20 s - 0.5 * 9.8 m/s^2 * (5.20 s)^2
h ≈ 121.40 m
Therefore, the height of the cliff is approximately 121.40 m.
2. Speed of the rock right before it hits the ground:
The horizontal component of velocity remains constant throughout the motion. The vertical component of velocity at the time of impact can be found using:
vfy = v0y - g * t
where vfy is the final vertical component of velocity.
Substituting the given values, we have:
vfy = 17.8 m/s * sin(57°) - 9.8 m/s^2 * 5.20 s
vfy ≈ -51.94 m/s (negative sign indicates downward direction)
Therefore, the speed of the rock right before it hits the ground is approximately 51.94 m/s.
3. Maximum height of the rock:
The maximum height can be calculated using the equation:
ymax = (v0y^2) / (2 * g)
Substituting the given values, we have:
ymax = (17.8 m/s * sin(57°))^2 / (2 * 9.8 m/s^2)
ymax ≈ 1.14 m
Therefore, the maximum height of the rock, measured from the top of the cliff, is approximately 1.14 m.
Learn more about velocity here:
https://brainly.com/question/28395671
#SPJ11
A bar of gold measures 0.15 m×0.020 m×0.020 m. How many gallons of water have the same mass as this bar? ( 1gal=3.785×10 −3
m 3
)
The given bar of gold has the same mass as 0.0158 gallons of water.
The given bar of gold measures 0.15 m×0.020 m×0.020 m. We need to find out how many gallons of water have the same mass as this bar of gold.
We know, mass = volume × density
Let the density of gold be ρ, and the density of water be σ. Both densities are constant, so we can write,
mass of gold = ρ × volume of gold = ρ × (0.15 m × 0.020 m × 0.020 m) = 0.00006 ρ m³
mass of water = σ × volume of water = σ × V gal
Where, V gal is the volume of water in gallons, andσ = 1000 kg/m³ [density of water]and1 gal = 3.785 x 10⁻³ m³
By equating the masses of gold and water, we get,0.00006 ρ m³ = σ × V galV gal = (0.00006 ρ / σ) m³ = (0.00006/1000) m³/gal / (3.785 x 10⁻³) m³/gal gal = 0.0158 gal
Therefore, the given bar of gold has the same mass as 0.0158 gallons of water.
To learn about density here:
https://brainly.com/question/26364788
#SPJ11
Proton in a cube [40 points] A proton (charge +e=1.6×10 −19
C ) is located at the center of a cube of side length a. a) Find the total electric flux Φ tot
through the closed cube surface. Use ε 0
=8.85×10 −12
N⋅m 2
C 2
. Hint: The result is independent of the side length a of the cube. b) Find the electric flux Φ f
through one face (f) of the cube. Hint: Don't do an integral, but find the answer using part a) and a symmetry argument.
(a) The total electric flux through the closed cube surface is 1.81×10⁸N⋅m²C⁻¹.
(b) The electric flux through one face of the cube is 3.02×107N⋅m2C−1.
(a) Calculation of total electric flux through the closed cube surface: The electric flux through a closed surface can be calculated by Gauss's law.
According to Gauss's law, the electric flux through a closed surface is given byΦtotal=qenclosed/ε0, where q enclosed is the total charge enclosed by the surface. Here, the proton is located at the center of the cube and is enclosed by the cube.
Therefore, the total electric flux is given byΦtotal=qenclosed/ε0=+e/ε0 =1.6×10⁻¹⁹C/8.85×10⁻¹²N⋅m2C−2=1.81×10⁸N⋅m2C−1
Therefore, the total electric flux through the closed cube surface is 1.81×10⁸N⋅m²C⁻¹.
(b) Calculation of electric flux through one face of the cube: Since the electric field due to a point charge decreases as the square of the distance from the charge, the electric flux through each face of the cube is equal.
Therefore, the electric flux through one face of the cube is given byΦf=Φtotal/6=1.81×10⁸N⋅m2C−1/6=3.02×10⁷N⋅m²C⁻¹
Therefore, the electric flux through one face of the cube is 3.02×10⁷N⋅m²C⁻¹.
To learn about electric flux here:
https://brainly.com/question/14372859
#SPJ11
Estimate the rms speed of an amino acid, whose molecular mass is 89 u, in a living cell at 37°C. Express your answer to two significant figures and include the appropriate units. What would be the mms speed of a protein of molecular mass 85,000 u at 37°C? Express your answer to two significant figures and include the appropriate units.
The rms speed of the amino acid in a living cell at 37°C is approximately 1.47 × 10^3 m/s.
The rms speed of the protein with a molecular mass of 85,000 u at 37°C is approximately 3.13 m/s.
To estimate the root mean square (rms) speed of an amino acid at 37°C, we can use the following equation:
v = sqrt((3 * k * T) / m)
where v is the rms speed, k is the Boltzmann constant (1.38 × 10^-23 J/K), T is the temperature in Kelvin, and m is the molecular mass in kilograms.
First, let's convert the temperature from Celsius to Kelvin:
T = 37°C + 273.15 = 310.15 K
For an amino acid with a molecular mass of 89 u, we need to convert it to kilograms:
m = 89 u * (1.66 × 10^-27 kg/u) = 1.47 × 10^-25 kg
Now we can calculate the rms speed:
v = sqrt((3 * 1.38 × 10^-23 J/K * 310.15 K) / (1.47 × 10^-25 kg))
v ≈ 1.47 × 10^3 m/s
For a protein with a molecular mass of 85,000 u, we can follow the same steps:
m = 85,000 u * (1.66 × 10^-27 kg/u) = 1.41 × 10^-20 kg
v = sqrt((3 * 1.38 × 10^-23 J/K * 310.15 K) / (1.41 × 10^-20 kg))
v ≈ 3.13 m/s
To know more about root mean square (rms)
https://brainly.com/question/31830043
#SPJ11
Under the same conditions as in question 19 total internal reflection: can occur if the angle of incidence is small cannot occur can occur if the angle of incidence is equal to the critical angle can occur if the angle of incidence is large When light moves from a medium with index of refraction 1.5 into a medium with index of refraction 1.2 it will: Speed up and refract away from the normal Slow down and refract towards the normal Speed up and refract towards the normal Slow down and refract away from the normal
When light moves from a medium with an index of refraction of 1.5 into a medium with an index of refraction of 1.2, it will slow down and refract towards the normal.
The speed of light is determined by the refractive index of the medium through which it is traveling. The refractive index is a measure of how much the speed of light is reduced when it enters a particular medium compared to its speed in a vacuum. In this case, the light is moving from a medium with a higher refractive index (1.5) to a medium with a lower refractive index (1.2).
When light enters a medium with a lower refractive index, it slows down. This is because the interaction between light and the atoms or molecules in the medium causes a delay in the propagation of light. The extent to which light slows down depends on the difference in refractive indices between the two media.
Additionally, when light passes from one medium to another at an angle, it changes direction. This phenomenon is known as refraction. The direction of refraction is determined by Snell's law, which states that the angle of incidence and the angle of refraction are related to the refractive indices of the two media.
In this case, since the light is moving from a higher refractive index (1.5) to a lower refractive index (1.2), it will slow down and refract towards the normal. This means that the light ray will bend towards the perpendicular line (normal) to the surface separating the two media.
Learn more about index of refraction:
https://brainly.com/question/30761100
#SPJ11
An object is placed 1.0cm in front of a concave mirror whose radius of curvature is 4.0 cm. What is the position of the image? -1.75 cm -2.0cm or 1.75 cm 2.0cm
The position of the image formed by a concave mirror with a radius of curvature of 4.0 cm when an object is placed 1.0 cm in front of it can be determined. The image will be located at a distance of -2.0 cm from the mirror.
In this case, we can use the mirror equation to calculate the position of the image. The mirror equation is given by:
1/f = 1/do + 1/di
Where f is the focal length of the mirror, do is the object distance (distance of the object from the mirror), and di is the image distance (distance of the image from the mirror).
For a concave mirror, the focal length (f) is equal to half the radius of curvature (R). In this case, R is 4.0 cm, so the focal length is 2.0 cm.
Substituting the given values into the mirror equation:
1/2.0 = 1/1.0 + 1/di
Simplifying the equation, we find:
1/2.0 - 1/1.0 = 1/di
1/di = 1/2.0 - 1/1.0
1/di = 1/2.0 - 2/2.0
1/di = -1/2.0
di = -2.0 cm
The negative sign indicates that the image is formed on the same side of the mirror as the object, which means it is a virtual image. The absolute value of -2.0 cm gives us the position of the image, which is 2.0 cm.
Learn more about mirror equation here:
https://brainly.com/question/31097794
#SPJ11
A solenoid of length 2.30 m and radius 1.90 cm carries a current of 0.180 A. Determine the magnitude of the magnetic field inside if the solenoid consists of 1600 turns of wire.
A solenoid of length 2.30 m and radius 1.90 cm carries a current of 0.180 A. The magnitude of the magnetic field inside the solenoid is 0.0471 T.
The formula to calculate the magnetic field inside the solenoid is given by: B = μ₀(nI) Where, n is the number of turns per unit length of the solenoid, and I is the current flowing through the solenoid.
μ₀ is the magnetic constant whose value is 4π × 10⁻⁷ Tm/A. Given data, Length of the solenoid = 2.30 m , Radius of the solenoid = 1.90 cm = 0.0190 m, Current flowing through the solenoid = 0.180 A, Number of turns of wire in the solenoid = 1600, Turns per unit length = N/L, where N is the total number of turns and L is the length of the solenoid. So, turns per unit length is given by: Turns per unit length = 1600/2.30 = 695.7 turns/m Substituting the given values in the formula to find the magnetic field inside the solenoid: B = μ₀(nI)B = 4π × 10⁻⁷ × 695.7 × 0.180B = 0.0471 T
Therefore, The magnitude of the magnetic field inside the solenoid is 0.0471 T.
Learn more about magnetic constant here:
https://brainly.com/question/15205383
#SPJ11
A concave mirror is to form an image of the filament of a headlight Part A lamp on a screen 8.50 m from the mirror. The filament is 8.00 mm tall, and the image is to be 26.0 cm tall. How far in front of the vertex of the mirror should the filament be placed? Express your answer in meters. Part B What should be the radius of curvature of the mirror? Express your answer in meters.
A)The filament should be placed approximately 0.325 meters (or 32.5 cm) in front of the vertex of the mirror. B)The radius of curvature of the mirror should be approximately 0.156 meters (or 15.6 cm).
Part A: The magnification formula for a concave mirror is given by:
magnification (m) = -image height ([tex]h_i[/tex]) / object height ([tex]h_o[/tex])
Given that the image height ([tex]h_i[/tex]) is 26.0 cm and the object height ([tex]h_o[/tex]) is 8.00 mm. Converting the object height to centimetres,
object height = 0.80 cm.
Rearranging the formula, solve for the object distance:
[tex]d_o = -h_i / (m * h_o)[/tex]
Since the mirror forms a real and inverted image, the magnification (m) is negative. Substituting the given values,
[tex]d_o = -26.0 cm / (-1 * 0.80 cm) \approx 32.5 cm[/tex]
Converting the object distance to meters, the filament should be placed approximately 0.325 meters (or 32.5 cm) in front of the vertex of the mirror.
Part B: The mirror equation for a concave mirror is given by:
[tex]1 / d_o + 1 / d_i = 1 / f[/tex]
It's already determined that the object distance ([tex]d_o[/tex]) is approximately 0.325 meters. The image distance ([tex]d_i[/tex]) is the distance between the mirror and the screen, which is given as 8.50 m.
Substituting these values into the mirror equation, focal length (f):
1 / 0.325 + 1 / 8.50 = 1 / f
Simplifying the equation,
f ≈ 0.1556 m
Therefore, the radius of curvature of the mirror should be approximately 0.156 meters (or 15.6 cm).
Learn more about concave mirrors here:
https://brainly.com/question/31440449
#SPJ11
Momentum is conserved for a system of objects when which of the following statements is true?
-The sum of the momentum vectors of the individual objects equals zero.
-The forces external to the system are zero and the internal forces sum to zero, due to Newton’s Third Law.
-The internal forces cancel out due to Newton’s Third Law and forces external to the system are conservative.
-Both the internal and external forces are conservative.
The following statement is true. Momentum is conserved for a system of objects when the internal forces cancel out due to Newton's Third Law, and the forces external to the system are zero or conservative.
In order for momentum to be conserved in a system of objects, two conditions must be satisfied. First, the internal forces within the system must cancel out due to Newton's Third Law. This means that for every action force, there is an equal and opposite reaction force within the system, resulting in a net force of zero on the system as a whole.
Second, the external forces acting on the system must either be zero or conservative. If the external forces are zero, there is no external influence on the system's momentum. If the external forces are conservative, they can be accounted for in terms of potential energy, and their effects on momentum can be accounted for through the principle of conservation of mechanical energy.
Learn more about momentum here:
https://brainly.com/question/30677308
#SPJ11
A woman is sitting on a roof with a pitch of 19.02°, relaxing in the quiet by reading a book. If she has a mass of 65.67kg, what is the coefficient of static friction between her pants and the shingles?
The coefficient of static friction between the woman's pants and the shingles is 0.35.
The frictional force equation is given by:
f = μsN where:
f is the force of friction.
μs is the coefficient of static friction.
N is the normal force.
In this scenario, a woman is sitting on a roof with a pitch of 19.02°. The frictional force acting upon her is that of static friction. If the woman has a mass of 65.67 kg, we need to find the coefficient of static friction between her pants and the shingles. The normal force acting upon her is given by:
N = mg where:
m is the mass of the woman.
g is the acceleration due to gravity.
Substituting the given values, we get:
N = 65.67 kg × 9.8 m/s² = 644.466 N
The force acting upon the woman is given by:
F = mg sinθ where:
θ is the angle of inclination of the roof.
Substituting the given values, we get:
F = 65.67 kg × 9.8 m/s² × sin(19.02°) = 226.035 N
The coefficient of static friction can be determined using the following equation:
μs = f/N
Substituting the values, we get:μs = 226.035 N / 644.466 N = 0.35
Hence, the coefficient of static friction between the woman's pants and the shingles is 0.35.
Learn more about static friction https://brainly.com/question/13680415
#SPJ11
Three 560 resistors are wired in series with a 75 V battery. What is the current through each of the resistors? Express your answer to the nearest mA.
Three 560 Ω resistors are connected in series with a 75 V battery. The current through each resistor is approximately 44.6 mA.
To find the current through each resistor, we can use Ohm's Law, which states that the current (I) flowing through a resistor is equal to the voltage (V) across the resistor divided by its resistance (R).
In this case, the resistance (R) of each resistor is given as 560 Ω. The total voltage (V) supplied by the battery is 75 V. Since the resistors are wired in series, the total resistance (RT) is the sum of the individual resistances: RT = R1 + R2 + R3 = 560 Ω + 560 Ω + 560 Ω = 1680 Ω.
Using Ohm's Law, we can calculate the total current (IT) flowing through the circuit:
IT = V / RT = 75 V / 1680 Ω ≈ 0.0446 A.
Since the resistors are in series, the current flowing through each resistor is the same. Therefore, the current through each resistor is approximately 0.0446 A, or 44.6 mA.
So, the current through each of the resistors is approximately 44.6 mA.
To know more about Ohm's Law,
https://brainly.com/question/1247379
#SPJ11
A +10 C charge exerts a force on an electron that is: Select one: a. Attractive and inversely proportional to the square of the distance between the charges b. Attractive and directly proportional to the square of the distance between the charges c. Repulsive and inversely proportional to the square of the distance between the charges d. Repulsive and directly proportional to the square of the distance between the charges
A +10 C charge exerts a force on an electron that is: c. Repulsive and inversely proportional to the square of the distance between the charges.
A negatively charged subatomic particle known as an electron can be free (not bound) or attached to an atom. One of the three main types of particles within an atom is an electron that is bonded to it; the other two are protons and neutrons. The nucleus of an atom is made up of protons and electrons together. The positive charge of a proton balances the negative charge of an electron. An atom is in a neutral condition when it contains the same amount of protons and electrons.
To know more about electron
https://brainly.com/question/12001116
#SPJ11
: the alass is the same as when the light entered the glass from air. Determine the index of refraction of the liquid. Additional Materials
Therefore, we need more information to solve the problem. Hence, the answer cannot be determined.
The problem has provided that the alass is the same as when the light entered the glass from air. Thus, we can apply the principle of reversibility to the glass-air boundary to find the refractive index of the liquid.
The refractive index can be found using the formula:n1 sinθ1 = n2 sinθ2where n1 and n2 are the refractive indices of the media, θ1 and θ2 are the angles of incidence and refraction respectively.
Let's assume that the angle of incidence and refraction at the liquid-glass boundary is θ and θ'. Also, let the refractive index of the glass and liquid be n and n', respectively.
Using the principle of reversibility,n sinθ = n' sinθ' ...(1)Given, n = 1.5 (refractive index of the glass)and sinθ = 1.0 (since the alass is the same as when the light entered the glass from air)i.e. θ = 90°Plugging in these values into equation (1), we get:1.5 x 1.0 = n' x sinθ'n' = 1.5 / sinθ'
The angle of refraction, θ', can be obtained using Snell's law as:n sinθ = n' sinθ'θ' = sin⁻¹ (n sinθ / n')Substituting the values of n, n', and θ, we get:θ' = sin⁻¹ (1.5 x 1.0 / n')On substituting the value of n' in the above equation,
we get:θ' = sin⁻¹ (1.5 / n' sinθ')We do not have the value of θ' to find n'. Therefore, we need more information to solve the problem. Hence, the answer cannot be determined.
to know more about information
https://brainly.com/question/28234657
#SPJ11
A 58-kg rock climber at rest loses her control and starts to slide down through her rope from 186 m above the land shelf. She lands to the shelf with a velocity of 23m/s. Find the work done by the friction until she lands the shelf.
The work done by friction until the rock climber lands on the shelf is approximately 105468.8 Joules.
To find the work done by friction on the rock climber, we need to calculate the change in the gravitational potential energy of the climber as she slides down.
The change in gravitational potential energy is given by the formula:
ΔPE = m * g * Δh
where:
ΔPE is the change in gravitational potential energy,
m is the mass of the rock climber (58 kg),
g is the acceleration due to gravity (approximately 9.8 m/s²), and
Δh is the change in height (186 m).
Substituting the values into the formula, we have:
ΔPE = 58 kg * 9.8 m/s² * (-186 m)
The negative sign indicates that the gravitational potential energy decreases as the climber descends.
Calculating the value, we find:
ΔPE = -105468.8 J
The work done by friction is equal to the change in gravitational potential energy, but with a positive sign since friction acts in the direction of the displacement. Therefore, the work done by friction is:
Work = |ΔPE| = 105468.8 J
To know more about gravitational potential energy
https://brainly.com/question/29766408
#SPJ11
A nervous physicist worries that the two metal shelves of his wood frame bookcase might obtain a high voltage if charged by static electricity, perhaps produced by friction. (a) What is the capacitance (in F) of the empty shelves if they have area 1.40×10−1 m2 and are 0.240 m apart? F (b) What is the voltage between them (in V) if opposite charges of magnitude 2.50nC are placed on them? V (c) To show that this voltage poses a small hazard, calculate the energy stored (in J). ]
a) the voltage between the shelves is given by the formula,V = q/C= (2.50 × 10⁻⁹ C) / (5.15 × 10⁻¹¹ F)= 4.85 × 10¹¹ Vc). b).Capacitance, C ≈ 5.15 × 10⁻¹¹ FVoltage, V = 4.85 × 10¹¹ V. c) Energy stored, U ≈ 6.07 J.
a) Capacitance of the empty shelves:Capacitance is the ability of a body to store charge. It can be given as,C = εA/dWhere C is capacitance, ε is the permittivity of free space, A is the area of the plates and d is the distance between the plates. Given,Area of shelves, A = 1.40 × 10⁻¹ m²Distance between shelves, d = 0.240 mPermittivity of free space, ε = 8.85 × 10⁻¹² F/mTherefore, the capacitance of the empty shelves is,C = εA/d= (8.85 × 10⁻¹² F/m) × (1.40 × 10⁻¹ m²) / (0.240 m)≈ 5.15 × 10⁻¹¹ Fb) Voltage between the shelves:Given,Charge on each shelf, q = ± 2.50 nC = ± 2.50 × 10⁻⁹ CTherefore, the voltage between the shelves is given by the formula,V = q/C= (2.50 × 10⁻⁹ C) / (5.15 × 10⁻¹¹ F)= 4.85 × 10¹¹ Vc)
Energy stored in the shelves:Energy stored in a capacitor can be given as,U = (1/2)CV²Given, capacitance, C = 5.15 × 10⁻¹¹ FVoltage, V = 4.85 × 10¹¹ VTherefore, the energy stored in the shelves is,U = (1/2)CV²= (1/2) (5.15 × 10⁻¹¹ F) (4.85 × 10¹¹ V)²≈ 6.07 JAnswer:Capacitance, C ≈ 5.15 × 10⁻¹¹ FVoltage, V = 4.85 × 10¹¹ VEnergy stored, U ≈ 6.07 J.
Learn more about voltage here,
https://brainly.com/question/27861305
#SPJ11
design second order low pass filter with the following
specifications:
Fp=500hz
Fc=600hz
Ap= 1
A=60
Transfer function to Z transform
The resulting Z-transform transfer function is:
[tex]H(z) = (b0 * z^{2} + b1 * z + b_2) / (a0 * z^{2} + a1 * z + a_2)[/tex]
The transfer function of a second-order low-pass Butterworth filter can be represented as follows:
H(s) = K / ([tex]s^{2}[/tex] + s * ωc / Q + ω[tex]c^{2}[/tex])
To convert this transfer function to its equivalent Z-transform, we can use the bilinear transformation method. The bilinear transformation maps the s-plane to the z-plane using the following substitution:
s = (2 * Fs * (z - 1)) / (z + 1)
By substituting the above expression for s into the transfer function, we can obtain the Z-transform representation of the filter.
Let's assume the sampling frequency Fs is known, we can proceed with the design:
Determine the analog prototype filter cutoff frequency ωc:
ωc = 2π * Fc
Calculate the value of Q using the following relation:
Q = ωc / (Fc - Fp)
Compute the warped digital cutoff frequency Ωc using the bilinear transformation:
Ωc = 2 * Fs * tan(ωc / (2 * Fs))
Calculate the numerator coefficients of the Z-transform transfer function:
[tex]b_0[/tex] = (Ω[tex]c^{2}[/tex]) / (1 + Ωc / Q + Ω[tex]c^{2}[/tex])
[tex]b_1[/tex]= 2 * (Ω[tex]c^{2}[/tex]) / (1 + Ωc / Q + Ω[tex]c^{2}[/tex])
[tex]b_2[/tex]= (Ω[tex]c^{2}[/tex]) / (1 + Ωc / Q + Ω[tex]c^{2}[/tex])
Calculate the denominator coefficients of the Z-transform transfer function:
[tex]a_0[/tex] = 1
[tex]a_1[/tex] = 2 * (Ω[tex]c^{2}[/tex] - 1) / (1 + Ωc / Q + Ω[tex]c^{2}[/tex])
[tex]a_2[/tex]= (1 - Ωc / Q + Ω[tex]c^{2}[/tex]) / (1 + Ωc / Q + Ω[tex]c^{2}[/tex])
The Z-transform transfer function is:
[tex]H(z) = (b0 * z^{2} + b1 * z + b_2) / (a0 * z^{2} + a1 * z + a_2)[/tex]
To know more about Z-transform transfer function, here
brainly.com/question/32246466
#SPJ4
1. Write down an explanation, based on a scientific theory, of why a spring with a weight on one end bounces back and forth. Explain why it is scientific. Then, write a non- scientific explanation of the same phenomenon, and explain why it is non-scientific. Then, write a pseudoscientific explanation of the same phenomenon, and explain why it is pseudoscientific. 2. In each of following (a) through (e), use all of the listed words in any order in one sentence that makes scientific sense. You may use other words, including conjunctions; however, simple lists of definitions will not receive credit. Underline each of those words where they appear. You will be assessed on the sentence's grammatical correctness and scientific accuracy. (a) Popper, theory, falsification, science, prediction, [name of a celebrity] (b) vibration, pitch, music, stapes, power, [name of a singer] (c) harmonic, pendulum, frequency, spring, energy, [name of a neighbor] (d) Kelvin, joule, calorie, absorption, heat, [name of a food) (e) Pouiselle, millimeters, pressure, bar, over, (any metal]
Scientific Explanation: According to the scientific theory of harmonic motion, when a weight is attached to one end of a spring and released, it undergoes a series of oscillations or back-and-forth movements.
This phenomenon is governed by Hooke's Law, which states that the force exerted by a spring is directly proportional to its displacement from equilibrium. As the weight moves away from equilibrium, the spring exerts a restoring force in the opposite direction, causing the weight to decelerate and eventually reverse its motion. The cycle repeats as the weight continues to oscillate due to the interplay between potential energy stored in the spring and kinetic energy of the moving weight. This explanation is scientific because it is based on well-established physical principles, supported by empirical evidence, and subject to further testing and verification.
Non-Scientific Explanation: When a weight is attached to a spring and released, it bounces back and forth because the spring has a natural tendency to pull the weight back towards it. The weight's motion is like a game of catch, where the spring catches the weight and throws it back, causing it to bounce. This explanation is non-scientific because it relies on metaphorical language and analogy without providing a clear understanding of the underlying principles and mechanisms involved. It lacks scientific rigor and does not account for the fundamental physical laws governing the phenomenon.
Pseudoscientific Explanation: The bouncing of a weight on a spring is due to the mystical energy vibrations within the spring and weight. These vibrations create a harmonious resonance that propels the weight to move back and forth. The spring acts as a conduit for this mysterious energy, and the weight responds to its supernatural influence. This explanation is pseudoscientific because it invokes vague and unverifiable concepts such as mystical energies and resonance without providing any empirical evidence or grounding in established scientific principles. It relies on subjective beliefs rather than objective observations and testing.
To know more about Hooke's Law
https://brainly.com/question/30379950
#SPJ11
True or false: If your reverse the direction of charge motion and magnetic field without changing the polarity of the charge, the direction of force changes.
True. According to the right-hand rule, the direction of the force on a moving charged particle in a magnetic field is perpendicular to both the velocity vector of the particle and the magnetic field vector.
The direction of the force experienced by a charged particle moving in a magnetic field is given by the right-hand rule. If you point your right thumb in the direction of the particle's velocity and your fingers in the direction of the magnetic field, then the direction in which your palm is facing gives the direction of the force.
If you reverse the direction of the charge (i.e. change it from positive to negative or vice versa), the direction of the force will reverse as well. However, if you reverse the direction of the magnetic field or the direction of the charge's motion, the direction of the force will also reverse.
This is because the force is proportional to the cross product of the velocity of the charged particle and the magnetic field. The cross product is a vector operation that gives a result that is perpendicular to both of the vectors being multiplied. As a result, reversing the direction of either vector will also reverse the direction of the resulting force vector.
To know more about magnetic field, visit:
brainly.com/question/23096032
#SPJ11
A wheel rotates with a constant angular acceleration of 3.50rad/s 2
. A) If the angular speed of the wheel is 2.00rad/s at t i
=0, through what angular displacement does the wheel rotate in 2.00 s ? B) What is the angular speed of the wheel at t=2.00 s ?
A wheel has a constant angular acceleration of 3.50 rad/s². The wheel rotates through an angular displacement of 8.00 radians in 2.00 seconds. The angular speed is ω = 8.00 rad/s.
A) To calculate the angular displacement of the wheel in 2.00 seconds, we can use the formula θ = ωi * t + (1/2) * α * t², where θ is the angular displacement, ωi is the initial angular speed, α is the angular acceleration, and t is the time. Substituting the given values into the formula, we have θ = (2.00 rad/s) * (2.00 s) + (1/2) * (3.50 rad/s²) * (2.00 s)². Evaluating this expression gives θ = 8.00 rad. Therefore, the wheel rotates through an angular displacement of 8.00 radians in 2.00 seconds.
B) To find the angular speed of the wheel at t = 2.00 seconds, we can use the formula ω = ωi + α * t, where ω is the angular speed at a given time. Substituting the values into the formula, we have ω = (2.00 rad/s) + (3.50 rad/s²) * (2.00 s). Calculating this expression gives ω = 8.00 rad/s.
Learn more about displacement here:
https://brainly.com/question/11934397
#SPJ11
After feeding, an arctic tern is flying back to its nest at 20 km/h for 140 kilometres. It then starts to snow so the bird slows to 15 km/h. The bird arrives back at the nest after flying for a total of 9 hours and 15 minutes. How far is the nest from the feeding ground?After feeding, an arctic tern is flying back to its nest at 20 km/h for 140 kilometres. It then starts to snow so the bird slows to 15 km/h. The bird arrives back at the nest after flying for a total of 9 hours and 15 minutes. How far is the nest from the feeding ground?
The nest is located approximately 120 kilometers away from the feeding ground.
Let's break down the information given in the problem. The arctic tern first flies back to its nest at a speed of 20 km/h for a distance of 140 kilometers. The time taken for this leg of the journey can be calculated using the formula Time = Distance / Speed. So, the time taken for the first part is 140 km / 20 km/h = 7 hours.
Next, we are told that after the snow starts, the bird slows down to 15 km/h. The total time for the entire journey is given as 9 hours and 15 minutes, which is equivalent to 9.25 hours. Since the bird has already spent 7 hours on the initial leg, it has 9.25 - 7 = 2.25 hours remaining to cover the remaining distance.
To find the distance covered in these 2.25 hours, we use the formula Distance = Speed x Time. The speed during this period is 15 km/h, and the time is 2.25 hours. Therefore, the distance covered in the second leg is 15 km/h x 2.25 hours = 33.75 kilometers.
To determine the total distance from the feeding ground to the nest, we add the distance covered in the first and second legs: 140 kilometers + 33.75 kilometers = 173.75 kilometers. However, the question asks for the distance between the nest and the feeding ground, so we subtract the distance covered in the second leg from this total: 173.75 kilometers - 33.75 kilometers = 140 kilometers.
Therefore, the nest is located approximately 120 kilometers away from the feeding ground.
Learn more about time, speed, and distance:
https://brainly.com/question/31756299
#SPJ11