Answer: b
Explanation: because the light-scattering properties of our atmosphere spread sunlight across the sky. seeing the dim light of a distant star in the blanket of photons from our Sun becomes as difficult as spotting a single snowflake in a blizzard.
An aircraft flying from a region of higher air pressure towards a region of lower air pressure will _____ altitude, and the aircraft’s pressure altimeter will read an altitude _____ than the plane’s true elevation, unless corrections are made to the altimeter
An aircraft flying from a region of higher air pressure towards a region of lower air pressure will experience a change in altitude, and the aircraft's pressure altimeter will read an altitude different than the plane's true elevation, unless corrections are made to the altimeter.
When an aircraft moves from an area of higher air pressure to an area of lower air pressure, the aircraft will generally gain altitude. This occurs because the pressure difference causes the air to become less dense, allowing the aircraft to rise more easily. As a result, the aircraft's wings will generate more lift, enabling it to climb higher.
However, the pressure altimeter, which measures an aircraft's altitude based on the surrounding air pressure, will not accurately reflect the plane's true elevation in this situation. The altimeter will typically read an altitude lower than the actual elevation of the aircraft.
This discrepancy occurs because the altimeter is calibrated for a standard pressure setting and will not account for variations in air pressure without adjustments.
To ensure accurate altitude readings, pilots must make corrections to the altimeter by setting the appropriate pressure setting for the area they are flying in, known as the "altimeter setting." This setting can be obtained from air traffic control or other aviation weather sources.
By inputting the correct altimeter setting, the pressure altimeter will provide a more accurate altitude reading, reflecting the plane's true elevation.
In summary, an aircraft flying from a region of higher air pressure towards a region of lower air pressure will gain altitude, and the aircraft's pressure altimeter will read an altitude lower than the plane's true elevation unless corrections are made to the altimeter.
To know more about altimeter, visit:
https://brainly.com/question/13181528#
#SPJ11
When 2. 060 g of titanium is combusted in a bomb calorimeter, the temperature of the calorimeter increases from 25. 00°c to 91. 60°c. In a separate experiment, the heat capacity of the calorimeter is measured to be 9. 84 kj/k. The heat of reaction for the combustion of a mole of ti in this calorimeter is ________ kj/mol.
The heat of reaction for the combustion of a mole of Ti in this calorimeter is 15221.209 kJ/mol.
First, we need to calculate the amount of heat absorbed by the calorimeter:
ΔT = 91.60°C - 25.00°C = 66.60°C
q = (9.84 kJ/°C) x (66.60°C) = 655.344 kJ
Since the combustion of 2.060 g of titanium caused this increase in temperature, we can calculate the heat of reaction per mole of titanium:
molar mass of Ti = 47.87 g/mol
moles of Ti combusted = 2.060 g / 47.87 g/mol = 0.043 mol
ΔHrxn = q / n = 655.344 kJ / 0.043 mol = 15221.209 kJ/mol
To know more about combustion refer to-
https://brainly.com/question/15117038
#SPJ11
HELP ME PLEASEEEE
The student produced less magnesium oxide than expected.
Suggest two reasons why.
There could be several reasons why a student produced less magnesium oxide than expected. Here are two possibilities: Incomplete reaction, Loss of product
Incomplete reaction: Magnesium oxide is produced when magnesium metal is heated in the presence of oxygen. However, if the reaction is incomplete, then less magnesium oxide will be produced. One reason for incomplete reaction could be that the temperature was not high enough to provide the necessary activation energy.
Loss of product: It is possible that some of the magnesium oxide that was produced was lost during the experiment. For example, if the magnesium oxide was not handled carefully after it was produced, it may have been spilled or blown away.
To know more about Incomplete reaction, here
brainly.com/question/14335621
#SPJ4
A stone weighing 1. 5 kilograms is resting on a rock at a height of 20 meters above the ground. The stone rolls down 10 meters and comes to rest on a patch of moss. The gravitational potential energy of the stone on the moss is joules. (Use PE = m × g × h, where g = 9. 8 N/kg. )
The gravitational potential energy of the stone on the moss is 147 joules.
Gravitational potential energy is the energy possessed by an object due to its position in a gravitational field. It is defined as the energy required to move an object of a given mass from infinity to its current position against the force of gravity.
In the case of the stone weighing 1.5 kilograms resting on a rock at a height of 20 meters above the ground, the gravitational potential energy can be calculated using the formula PE = m × g × h, where m is the mass of the object, g is the acceleration due to gravity, and h is the height of the object above the ground.
So, in this case, the gravitational potential energy of the stone at a height of 20 meters can be calculated as:
PE = m × g × h
PE = 1.5 kg × 9.8 N/kg × 20 m
PE = 294 J
When the stone rolls down 10 meters and comes to rest on a patch of moss, its height above the ground decreases to 10 meters. The gravitational potential energy of the stone on the moss can be calculated using the same formula:
PE = m × g × h
PE = 1.5 kg × 9.8 N/kg × 10 m
PE = 147 J
Therefore, the gravitational potential energy of the stone on the moss is 147 joules.
To know more about gravitational potential energy, visit:
https://brainly.com/question/23134321#
#SPJ11
Why would it be unreasonable for an amendment to the clean air act to call for 0%
pollution emissions from cars with combustion engines?
It would be unreasonable for an amendment to the clean air act to call for 0% pollution emissions from cars with combustion engines because practically it is not possible to have 0% pollution emission.
The CAA was amended in 1965 with the Engine Vehicle Air Contamination Control Act (MVAPCA) which gave the Slash Secretary power to set government guidelines for vehicle emanations as soon as 1967.
In 1963, The Clean Air Act (CAA) was passed. It was an augmentation of Air Pollution Control Act, 1955, . The main idea behind this act was to empower the national government through US General administration under the division of Wellbeing, Government assistance and schooling, and to extend support towards innovative work and minimizing pollution.
To know more about clean air act here
https://brainly.com/question/30057213
#SPJ4
⁻⁻⁻⁻⁻ results in a new substance and it cannot be reversed by physical means
Chemical change results in a new substance and it cannot be reversed by physical means.
What is chemical change?Chemical changes is said to occur when a substance combines with another to form a new substance, called chemical synthesis or, alternatively, chemical decomposition into two or more different substances and are not reversible except by further chemical reactions.
Examples of chemical change would be:
Burning a piece of paper would be a chemical change, and also baking a cake.It is also worthy to note that in a physical change, no new substance is formed and also a chemical change is always accompanied by one or more new substance.
Learn more about chemical changes at: https://brainly.com/question/19794032
#SPJ1
Dead plant material can be compressed into coal (organic). the rock gets buried within the earth. the heat and pressure from the overlying material turn this coal into anthracite coal. what types of rocks are being described in this process? *
a: sedimentary and metamorphic
b: sedimentary and igneous
c: metamorphic and igneous
d: igneous, metamorphic and sedimentary
The types of rocks being described in this process are sedimentary and metamorphic. (A)
Dead plant material, which is organic, is compressed into coal, which is a type of sedimentary rock. The coal is then buried within the earth and subjected to heat and pressure from the overlying material, which turns it into anthracite coal, a type of metamorphic rock.
Sedimentary rocks are formed from the accumulation and cementation of sediment, such as dead plant material. Metamorphic rocks are formed from the transformation of existing rocks under intense heat and pressure. In this case, the coal is transformed into anthracite coal through the process of metamorphism.
Igneous rocks are not mentioned in this process, as they are formed from the cooling and solidification of magma or lava, and do not play a role in the formation of coal. Therefore, the correct answer is A: sedimentary and metamorphic.
To know more about anthracite coal click on below link:
https://brainly.com/question/2918384#
#SPJ11
3. A 385 g drinking glass is filled with a hot liquid. The liquid transfers 7032 J of energy to the glass. If the
temperature of the glass increases by from 12 to 24°C, what is the
specific heat of the glass?
The specific heat of the glass is 1.58 J/(g°C).
The specific heat of a substance is the amount of energy required to raise the temperature of one unit of mass of the substance by one degree Celsius.
To find the specific heat of the glass, we can use the formula:
Q = mcΔT
where Q is the amount of energy transferred to the glass, m is the mass of the glass, c is the specific heat of the glass, and ΔT is the change in temperature of the glass.
We are given:
m = 385 g
Q = 7032 J
ΔT = 24°C - 12°C = 12°C
Substituting these values into the formula, we get:
7032 J = (385 g) c (12°C)
Solving for c, we get:
c = 7032 J / (385 g * 12°C)
c = 1.58 J/(g°C)
For more question on specific heat click on
https://brainly.com/question/30738335
#SPJ11
Carbonic acid can form water and carbon dioxide upon heating. how much carbon dioxide is formed from 1.55 g of carbonic acid?
h2co3 -> h2o + co2
o 2.18 g
o 5.33 g
o 1.55 g
o 1.10 g
o 0.450 g
Answer is D)1.10 grams
From the balanced equation, we know that for every 1 mole of carbonic acid (H2CO3) that is heated, 1 mole of carbon dioxide ([tex]CO_2[/tex]) is produced. The molar mass of [tex]H_2CO_3[/tex] is 62.03 g/mol, while the molar mass of [tex]CO_2[/tex] is 44.01 g/mol.
To find out how much carbon dioxide is formed from 1.55 g of carbonic acid, we first need to convert the mass of [tex]H_2CO_3[/tex] to moles:
1.55 g [tex]H_2CO_3[/tex] / 62.03 g/mol [tex]H_2CO_3[/tex] = 0.025 mol [tex]H_2CO_3[/tex]
Since the mole ratio of [tex]H_2CO_3[/tex] to [tex]CO_2[/tex] is 1:1, we know that 0.025 moles of [tex]CO_2[/tex] will be produced.
To convert this to grams:
0.025 mol [tex]CO_2[/tex] x 44.01 g/mol [tex]CO_2[/tex] = 1.10 g CO2
Therefore, 1.55 g of carbonic acid will produce 1.10 g of carbon dioxide upon heating.
To know more about mole concept:
https://brainly.in/question/48859318
#SPJ11
A 20. 0 g lead ball is heated in a Bunsen burner to 705 degrees celsius. It is then dropped into a 500. 0 g water bath. What is the initial temperature of the water if the final temperature is 35 degrees celsius? The C of lead is 0. 13 J/g degrees C.
[ Remember: Ch2o = 4. 18 J/g degrees celsius]
The initial temperature of the water is 25.8 °C. As a result, the lead ball loses heat rapidly when it is placed in the water bath, causing the water temperature to increase significantly.
What is Temperature?
Temperature is a measure of the average kinetic energy of the particles in a substance. It is a physical quantity that describes how hot or cold an object is. Temperature is usually measured using a thermometer and is commonly expressed in units such as degrees Celsius (°C), Fahrenheit (°F), or Kelvin (K).
The energy gained by the water can also be calculated using the formula:
Q = mcΔT
where Q is the energy gained (in joules), m is the mass of the water (in grams), c is the specific heat capacity of water (in J/g°C), and ΔT is the change in temperature of the water (in °C).
We can calculate Q as follows:
Q = (500.0 g)(4.184 J/g°C)(35°C - T)
where T is the initial temperature of the water.
Since the energy lost by the lead ball is equal to the energy gained by the water, we can set these two equations equal to each other and solve for T:
(20.0 g)(0.13 J/g°C)(705°C - T) = (500.0 g)(4.184 J/g°C)(35°C - T)
Simplifying and solving for T gives:
T = 25.8°C
Therefore, the initial temperature of the water is 25.8 °C.
To know more about Temperature, visit;
https://brainly.com/question/26866637
#SPJ4
suppose changes in climate raised the temperature of the limestone rock in a cave by a small amount what do you think would be the effect on the reactions that form the cave and the structures within it cave formation involves many processes so you only need to discuss the processes you are sure take place
Calcium carbonate is dissolved by acidic groundwater, creating limestone caves. It is possible for the rate of chemical reactions to accelerate when the temperature of limestone rock in a cave rises.
This could speed up the decomposition of calcium carbonate, which would speed up the creation of caves. The reverse outcome, though, is also possible because a rise in temperature can also make the water in the cave evaporate, which can cause calcium carbonate to precipitate and give rise to stalactites, stalagmites, and other structures. The balance between dissolution and precipitation reactions, and how these are altered, determine how temperature affects cave development.
To know more about Calcium carbonate, here
brainly.com/question/13565765
#SPJ1
When sodium hydroxide reacts with a cropper nitrate solution, the reaction vessel needs to be kept on ice to slow down the reaction what does describes this reaction
When sodium hydroxide reacts with a copper nitrate solution, the reaction vessel needs to be kept on ice to slow down the reaction. This describes an exothermic reaction.
An exothermic reaction is a type of reaction which releases heat.
The cooling provided by the ice helps control the reaction rate and prevents it from becoming too vigorous or unmanageable.
To know more about exothermic reaction visit:
https://brainly.com/question/30135580
#SPJ11
Chemistry Calculating moles.
The molarity of an aqueous solution containing 6.7 moles of potassium chloride in 0.63L is 10.6 M.
The quantity of solute molecules per litre of solution is known as a solution's molarity. In this issue, we are given the number of moles of solute (potassium chloride) and the volume of the solution. We can use this information to calculate the molarity of the solution using the following formula:
Volume of solution (V) / moles of solute (n) equals molarity (M).
Substituting the given values, we get:
Molarity (M) = 6.7 moles / 0.63 L = 10.6 M
Therefore, the molarity of the solution is 10.6 M, rounded to the tenths place.
It is important to note that molarity is a measure of concentration and is affected by both the amount of solute and the volume of the solution. Thus, it is important to accurately measure the volume of the solution to calculate the molarity correctly.
Furthermore, it is important to use caution when handling concentrated solutions such as this one, as they can be hazardous. Proper safety equipment and procedures should be followed when working with such solutions.
To learn more about moles here
brainly.com/question/26416088
#SPJ1
Which is composed of aromatic hydrocarbons?clothingbarbeque fuelpain relieverspolyvinyl chloride
Aromatic hydrocarbons are organic compounds that contain one or more benzene rings in their structure. These compounds are characterized by their strong, pleasant odor, which is why they are called aromatic. They are commonly found in petroleum products and are often used as feedstock for the production of chemicals and fuels.
Out of the options given, clothing and polyvinyl chloride do not contain aromatic hydrocarbons. On the other hand, barbecue fuel and pain relievers can contain aromatic hydrocarbons.
Barbecue fuel, also known as charcoal briquettes, is made from compressed charcoal dust mixed with a binding agent. The charcoal is made by heating wood in the absence of oxygen to remove the moisture and other impurities. The resulting charcoal contains a high concentration of aromatic hydrocarbons, which gives it its characteristic smell and helps it burn efficiently.
Pain relievers, such as aspirin and ibuprofen, are also known to contain aromatic hydrocarbons. These compounds are used in the synthesis of these drugs as intermediates, and traces of them can be present in the final product. However, the levels are generally low and not considered harmful to health.
In summary, barbecue fuel and pain relievers can contain aromatic hydrocarbons, while clothing and polyvinyl chloride do not. It is important to note that exposure to high levels of these compounds can be harmful to health, and precautions should be taken to minimize exposure.
To know more about hydrocarbons refer here
https://brainly.com/question/31643106#
#SPJ11
Answer: b
Explanation: because i just took the quiz
If 450.5 calories of heat energy are added to a 89.6 gram sample of aluminium (specific heat of 0.215 calories per gram degree celsius) and the initial temperature of the sample is 25.7 degrees celsius then what is the final temperature in degrees celsius?
The final temperature is 49.2 degrees Celsius.
To find the final temperature, we can use the formula:
Q = mcΔT
where Q represents the amount of heat energy measured in calories (450.5 calories), m represents the mass of the substance in grams (89.6 grams), c represents the specific heat capacity in calories per gram per degree Celsius (0.215 calories/gram degree Celsius), and ΔT represents the change in temperature.
First, we need to find the change in temperature (ΔT):
450.5 calories = (89.6 grams) * (0.215 calories/gram degree Celsius) * ΔT
Now, we can solve for ΔT:
ΔT = 450.5 calories / [(89.6 grams) * (0.215 calories/gram degree Celsius)] ≈ 23.5 degrees Celsius
Since we know the initial temperature (25.7 degrees Celsius), we can find the final temperature:
Final temperature = Initial temperature + ΔT = 25.7 degrees Celsius + 23.5 degrees Celsius ≈ 49.2 degrees Celsius
Know more about Heat Energy here:
https://brainly.com/question/25384702
#SPJ11
A 1500. 0 gram piece of wood with a specific heat capacity of 1. 8 g/JxC absorbs 67,500 Joules of heat. If the final temperature of the wood is 57C, what is the initial temperature of the wood? (2 sig figs)
If the final temperature of the wood is 57C, then the initial temperature of the wood would have been 32.00 ºC.
To solve the problem, we can use the formula,
Q = m * c * ΔT , amount of heat absorbed by the wood is Q, its mass is m, specific heat capacity is c, the change in temperature is ΔT.
We know that m = 1500.0 g, c = 1.8 J/gºC, Q = 67,500 J, and the final temperature T₂ = 57ºC. We need to find the initial temperature T₁.
First, we can calculate the change in temperature,
ΔT = T₂ - T₁
ΔT = 57ºC - T₁
Next, we can rearrange the formula to solve for T₁,
T₁ = T₂ - (Q / (m * c))
T₁ = 57ºC - (67,500 J / (1500.0 g * 1.8 J/gºC))
T₁ = 57ºC - 25ºC
T₁ = 32ºC
Therefore, the initial temperature of the wood was 32.00 ºC.
To know more about specific heat capacity, visit,
https://brainly.com/question/21406849
#SPJ4
treatment of pentanedioic (glutaric) anhydride with ammonia at elevated temperature leads to a compound of molecular formula c5h7no2. what is the structure of this product? [hint: you need to think about the reactivity not only of acid anhydrides but also of amides and carboxylic acids]
The structure of the product is drawn.
The reaction between pentanedioic anhydride and ammonia at elevated temperature is an example of amidation reaction. The product formed has a molecular formula of C₅H₇NO₂, which suggests that it has five carbon atoms, seven hydrogen atoms, one nitrogen atom, and two oxygen atoms.
The constitutional isomers with the molecular formula C₅H₇NO₂ are,
Pentanamide (also known as valeramide)
2-Aminopentanoic acid (also known as α-aminocaproic acid)
3-Aminopentanoic acid (also known as β-aminocaproic acid)
Of these three isomers, only 2-aminopentanoic acid and 3-aminopentanoic acid have two oxygen atoms. Therefore, one of these two isomers is the product of the reaction.
To distinguish between the two isomers, we need to consider the conditions of the reaction. The reaction was carried out at elevated temperature, which suggests that it is likely to be a thermal reaction. Under thermal conditions, the reaction is expected to favor the formation of the less substituted amide, which in this case is 2-aminopentanoic acid.
To know more about ammonia, here
https://brainly.com/question/15719562
#SPJ4
How many molecules are in 9. 44 moles of AlCl3? *
Pleaseeeee helpppp
There are approximately 3.40 x 10²⁴ molecules in 9.44 moles of AlCl₃.
This is calculated by using Avogadro's number (6.022 x 10²³) and multiplying it by the number of moles given.
To calculate the number of molecules in a given amount of substance, we use Avogadro's number, which is 6.022 x 10²³. This number represents the number of particles (molecules, atoms, ions) in one mole of a substance.
In this case, we are given the number of moles of AlCl₃, which is 9.44. To calculate the number of molecules, we simply multiply the number of moles by Avogadro's number:
9.44 moles AlCl₃ x 6.022 x 10²³ molecules/mole = 3.40 x 10²⁴ molecules AlCl₃
Therefore, there are approximately 3.40 x 10²⁴ molecules in 9.44 moles of AlCl₃.
To know more about Avogadro's number click on below link:
https://brainly.com/question/28812626#
#SPJ11
150.0g of steam at 145°C would need to lose how many joules of energy to become a liquid at 98°C? How
many cal of energy would that be?
The amount of heat that would be given out is 14.1kJ.
What is the heat capacity?Heat capacity is a physical property that describes the amount of heat required to raise the temperature of a substance by one degree Celsius. We know that the heat capacity of steam is 2J/g/°C.
We can tell that;
H = mcdT
H = heat that is absorbed or evolved
m = mass of the object
c = Heat capacity of the object
dT = temperature change
Then we have that;
H = 150 * 2 * (98 - 145)
H = -14.1kJ This is the heart lost
Learn more about heat capacity:https://brainly.com/question/29766819
#spj1
What would be the observation on day 4 of the bread mould
On day 4, you would observe a significant growth of white, fuzzy mycelium. The mycelium is composed of thread-like structures called hyphae, which spread throughout the bread and extract nutrients from it.
The mycelium is the vegetative part of the mold and serves to anchor the fungus and absorb nutrients. You may also notice that the bread has become softer and more moist due to the absorption of water by the mycelium. Additionally, you may observe spore-producing structures, such as black or green spore heads, which indicate that the mold is beginning to reproduce. The growth of the mycelium and spores on day 4 indicates that the bread mold is thriving and will continue to spread and consume the bread.
To know more about nutrients, here
brainly.com/question/1268939
#SPJ1
Help with chemistry pleaseeeee
The term mole concept is used here to determine the number of atoms in 6.88 moles of AgNO₃. The number of atoms present in 6.88 moles of AgNO₃ is
One mole of a substance is defined as that amount of it which contains as many particles or entities as there are atoms in exactly 12 g of carbon-12. The equation used to calculate the number of moles is given as:
4. Number of atoms = Number of moles of atoms × 6.022 × 10²³
6.88 × 6.022 × 10²³ = 4.14 × 10²⁴
5. Number of moles of atoms = 278 / 110.98 = 2.50
Number of atoms = 2.50 × 6.022 × 10²³ = 1.50 × 10²⁴
To know more about mole concept, visit;
https://brainly.com/question/30307377
#SPJ1
A sample of crushed rock is found to have 4. 81 x 10^21 atoms of gold, how many moles of hold are present in this sample?
The sample of crushed rock containing 4.81 x 10²¹ atoms of gold corresponds to 0.008 moles of gold.
The number of moles of gold in the sample of crushed rock can be calculated by dividing the total number of atoms of gold by Avogadro's number, which represents the number of particles in one mole of a substance.
First, we convert the given value of atoms of gold to moles by dividing by Avogadro's number (6.022 x 10²³ atoms per mole).
Number of moles of gold = 4.81 x 10²¹ atoms / 6.022 x 10²³ atoms/mol
Simplifying the calculation, we get:
Number of moles of gold = 0.00799 moles
Therefore, there are approximately 0.008 moles of gold present in the sample of crushed rock.
To know more about the moles of gold refer here :
https://brainly.com/question/8920501#
#SPJ11
A solution contains 37.5 grams of calcium carbonate (caco3) in 500 ml of
water. what is the concentration of this solution?
The concentration of the solution is 0.748 M.
To find the concentration of the solution, we need to calculate the number of moles of calcium carbonate present in the solution.
First, we need to determine the molecular weight of calcium carbonate ([tex]CaCO3[/tex]).
[tex]CaCO3[/tex] = 1 x Ca + 1 x C + 3 x O
= 40.08 g/mol + 12.01 g/mol + (3 x 16.00 g/mol)
= 100.09 g/mol
Next, we can use the formula:
concentration (in mol/L) = moles of solute / volume of solution (in L)
We have 37.5 grams of calcium carbonate in 500 ml of water. To convert ml to L, we divide by 1000:
volume of solution = 500 ml / 1000 ml/L = 0.5 L
moles of calcium carbonate = mass / molecular weight
= 37.5 g / 100.09 g/mol
= 0.374 moles
Therefore, the concentration of the solution is:
concentration = 0.374 moles / 0.5 L
= 0.748 M
The concentration of the solution is 0.748 M.
To know more about concentration refer to-
https://brainly.com/question/10725862
#SPJ11
1) what type of solution (saturated or unsaturated ) is present for Pb(NO3)2 if at approximately 25 degrees c
,65 grams of the substance are present in the 100 grams of H2O
2)40 grams of KCl are dissolve in 100 grams of H2O at 10 degrees c how many grams will not dissolve
3)how many grams of H2O are needed to dissolve 50 grams of KClO3 at 70 degrees C
4)how many grams of K2Cr2O7 will dissolve in 75 grams of H2O at 90 degrees C
5) 59 grams of CaCl2 are dissolve in 100 grams of water at approximately 25 degrees c how many more grams of CaCl2 must be added to saturate the solution
1) The solution is saturated. 2) 40 grams of KCl has dissolved in 100 grams. 3) 50 grams of KClO₃ will dissolve. 4) 75 grams of H₂O can dissolve 24.6 grams. 5) To saturate 28.4 grams of CaCl₂ must be added.
What is saturated?Saturated is a term used to describe a state of being filled to capacity, or containing the maximum amount possible. It is most commonly used in reference to liquids, where it indicates that no more of a given substance can be dissolved into the liquid. In chemistry, saturation refers to the point at which a solution has reached its maximum solubility.
1) The solution is saturated because 65 grams of Pb(NO₃)₂ has dissolved in 100 grams of H₂O at 25°C.
2) 40 grams of KCl has dissolved in 100 grams of H₂O at 10°C, so no more will dissolve.
3) 50 grams of KClO₃ will dissolve in 92.5 grams of H₂O at 70°C.
4) 75 grams of H₂O can dissolve 24.6 grams of K₂Cr₂O7 at 90°C.
5) At 25°C, 59 grams of CaCl₂ has dissolved in 100 grams of H₂O. To saturate the solution, an additional 28.4 grams of CaCl₂ must be added.
To learn more about saturated
https://brainly.com/question/2078413
#SPJ4
Help what’s the answer?
69.6 grams of carbon tetrachloride will be formed after the complete reaction of 32.0 grams of chlorine gas with excess carbon disulfide.
How do we calculate?Moles of chlorine = mass of chlorine / molar mass of chlorine
Moles of chlorine = 32.0 g / 70.9 g/mol = 0.451 mol
the mole ratio between chlorine and carbon disulfide is 1:1 from the balanced equation, also the number of moles of carbon disulfide is also 0.451 mol.
Moles of carbon tetrachloride = moles of carbon disulfide
Moles of carbon tetrachloride = 0.451 mol
We use the molar mass of carbon tetrachloride to convert the number of moles to grams.
Mass of carbon tetrachloride = moles of carbon tetrachloride x molar mass of carbon tetrachloride
Mass of carbon tetrachloride = 0.451 mol x 154.0 g/mol = 69.6 g
Learn more about molar mass at: https://brainly.com/question/21334167
#SPJ1
How many moles of nitrogen atoms and oxygen atoms are present in the 23. 5 mol sample C7H5N3O6?
In a 23.5 mol sample of C₇H₅N₃O₆, there are 6.87 moles of nitrogen atoms and 8.79 moles of oxygen atoms.
In order to determine the number of moles of nitrogen and oxygen atoms in a 23.5 mol sample of C₇H₅N₃O₆, we first need to look at the chemical formula for this compound.
From the formula, we can see that there are 7 nitrogen atoms and 9 oxygen atoms present in each molecule of C₇H₅N₃O₆.
To calculate the number of moles of nitrogen atoms, we multiply the total number of moles by the mole fraction of nitrogen in the compound:
Moles of nitrogen = 23.5 mol x (7 nitrogen atoms / 24 total atoms)
Moles of nitrogen = 6.87 mol
Similarly, to calculate the number of moles of oxygen atoms, we use the mole fraction of oxygen in the compound:
Moles of oxygen = 23.5 mol x (9 oxygen atoms / 24 total atoms)
Moles of oxygen = 8.79 mol
Therefore, there are approximately 6.87 moles of nitrogen atoms and 8.79 moles of oxygen atoms in a 23.5 mol sample of C₇H₅N₃O₆.
Learn more about moles at https://brainly.com/question/29367909
#SPJ11
Which pair of elements has the most similar Lewis structures?
N and S
N and P
F and Ne
F and Ar
The pair of elements that have the most similar Lewis structures are F and Ne.
The Lewis structure of an atom shows its valence electrons as dots around the symbol representing the nucleus. Atoms with similar Lewis structures have similar numbers of valence electrons and, therefore, similar chemical properties.
N and S have different numbers of valence electrons (5 and 6, respectively), so their Lewis structures are different.
P and F have different numbers of valence electrons (5 and 7, respectively), and the placement of the dots on their Lewis structures is different.
F and Ne both have 7 valence electrons and would have similar Lewis structures, with one dot representing each valence electron. They are both nonmetals and are found in the same period of the periodic table, which also contributes to their similar chemical properties.
To know more about Lewis structures, refer here:
https://brainly.com/question/20300458#
#SPJ11
Name the following compounds:
a. C2H4 or H2C=CH2
b. CsH6 or CH3CH=CH2
C. C4H8 or H2C=CHCH2CH3
d. CaHs or CH3CH2=CH2CH3
e. CsH1o or CHaCH2CH2CH=CH2
In states along the Gulf of Mexico, fossilized seashells from millions of years ago are often found on land many kilometers from the shore. These fossils are evidence that
States bordering the Gulf of Mexico have fossilized seashells from millions of years ago that were discovered on the ground far from the shore. This is evidence of previous geological and environmental changes in the area.
These fossils imply that the sea levels were much higher than they are today and that the area was once submerged underwater. The land rose and the sea retreated over time due to the movement of tectonic plates and other geological processes, leaving fossilized relics of marine life on what is now dry land. These fossils help us better comprehend the long-term processes that have changed our planet over millions of years and offer insightful information on the history of the area.
To know more about tectonic plates, here
brainly.com/question/19317822
#SPJ1
A container is filled with helium and nitrogen gas. A hole is poked into the container and the gases are
allowed to effuse. (A) Which gas would effuse faster? (B) Calculate the rate of effusion of helium to
nitrogen gas. (C) If it takes nitrogen gas 22 sec to effuse, how long would it take the helium gas?
(A) Helium gas would effuse faster than nitrogen gas. (B) The rate of effusion of helium to nitrogen gas is approximately 4:1. (C) It would take helium gas approximately 5.5 seconds to effuse.
Part (A): The rate of effusion is directly proportional to the velocity of the gas particles, which is inversely proportional to the square root of their masses.
Helium gas has a smaller molar mass (4 g/mol) than nitrogen gas (28 g/mol), which means its particles have a higher velocity and would effuse faster.
Part (B): According to Graham's law of effusion, the rate of effusion of two gases is inversely proportional to the square root of their molar masses.
Therefore, the rate of effusion of helium to nitrogen gas can be calculated as the square root of the ratio of their molar masses, which is approximately 4:1.
Part (C): Using Graham's law of effusion again, we can set up a proportion to find the time it would take helium gas to effuse if nitrogen gas takes 22 seconds.
The ratio of the square roots of their molar masses is 1:√7, so the proportion is:
√(4/28) : √(1/√7) = 22 : x
Solving for x, we get approximately 5.5 seconds.
To know more about Graham's law, refer here:
https://brainly.com/question/8804761#
#SPJ11