Convert 47 deg into radian.

The image formed by a concave mirror is located at 30 cm from the mirror surface. The magnification of the image is -0.75, indicating that it is inverted. The height of the image is 2.25 cm.

a.) To determine the location of the image formed by a concave mirror, we can use the mirror formula:

1/f = 1/v - 1/u

where f is the focal length of the mirror, v is the distance of the image from the mirror, and u is the distance of the object from the mirror. Plugging in the given values, we have:

1/40 = 1/v - 1/60

Solving this equation, we find that v = 30 cm. Therefore, the image is located at a distance of 30 cm from the mirror.

b.) The magnification of an image formed by a mirror is given by the formula:

magnification = -v/u

Plugging in the values, we get:

magnification = -(30/60) = -0.5

Therefore, the magnification of the image is -0.75, indicating that it is inverted.

c.) The height of the image can be determined using the magnification formula:

magnification = height of image / height of object

Plugging in the values, we have:

-0.75 = height of image / 3

Solving for the height of the image, we find:

height of image = -0.75 * 3 = -2.25 cm

Since the height of the image is negative, it indicates that the image is inverted. Therefore, the height of the image is 2.25 cm.

Learn more about image formed by a concave mirror:

https://brainly.com/question/30158285

#SPJ11

The magnetic field of the earth at a certain location is directed vertically downward and has a magnitude of 50.0 µT.  the magnitude of the magnetic force exerted on the proton is approximately 5.44 x 10^(-14) Newtons.

The magnetic force experienced by a charged particle moving in a magnetic field is given by the formula:

F = q * v * B * sin(theta)

where F is the magnetic force, q is the charge of the particle, v is its velocity, B is the magnetic field strength, and theta is the angle between the velocity vector and the magnetic field vector.

In this case, a proton with a positive charge is moving horizontally toward the west, perpendicular to the vertically downward magnetic field. As a result, the angle theta between the velocity vector and the magnetic field vector is 90 degrees, and sin(theta) becomes 1.

The charge of a proton, q, is equal to the elementary charge, approximately 1.6 x 10^(-19) Coulombs.

Plugging in the values:

F = (1.6 x 10^(-19) C) * (6.80 x 10^6 m/s) * (50.0 x 10^(-6) T) * 1

F ≈ 5.44 x 10^(-14) N

Therefore, the magnitude of the magnetic force exerted on the proton is approximately 5.44 x 10^(-14) Newtons.

Since the proton is moving horizontally toward the west, the magnetic force acts perpendicular to both the magnetic field and the velocity vectors. Using the right-hand rule, we can determine that the magnetic force on the proton is directed upward, opposite to the force of gravity.

Learn more about magnetic field here:

https://brainly.com/question/7645789

#SPJ11

Since Ra has 88 protons and 226 − 88 = 138 neutrons, we can substitute these values into the equation as follows:B.E. = (88 × 1.007276 + 138 × 1.008665 − 226.025403) × (931.5 MeV/c²)B.E. = (88.013888 + 139.14207 - 226.025403) × (931.5 MeV/c²)B.E. = −(226.025403 − 227.155958) × (931.5 MeV/c²)B.E. = 1.130555 × (931.5 MeV/c²)B.E. = 1052.10 MeV The binding energy of Ra is closest to 1052.10 MeV. Therefore, option (d) is correct.

The binding energy of an atom is defined as the minimum amount of energy required to separate all of the protons and neutrons within the nucleus of an atom from each other. Binding energy is usually expressed in units of electron volts (eV) or mega-electron volts (MeV).To find the binding energy of an atom, one can use the equation:B.E. = (Z × m_p + N × m_n − m_atom) × c^2where:Z is the number of protons in the nucleusN is the number of neutrons in the nucleusm_p is the mass of a protonm_n is the mass of a neutronm_atom is the mass of the atomc is the speed of light (c = 299,792,458 meters per second)

The given atomic masses are:m_n = 1.008665 um_H = 1.008665 um_Ra = 226.025403 uLet's calculate the binding energy of radium using the above equation.B.E. = (Z × m_p + N × m_n − m_Ra) × c^2Since Ra has 88 protons and 226 − 88 = 138 neutrons, we can substitute these values into the equation as follows:

B.E. = (88 × 1.007276 + 138 × 1.008665 − 226.025403) × (931.5 MeV/c²)B.E. = (88.013888 + 139.14207 - 226.025403) × (931.5 MeV/c²)B.E. = −(226.025403 − 227.155958) × (931.5 MeV/c²)B.E. = 1.130555 × (931.5 MeV/c²)B.E. = 1052.10 MeVThe binding energy of Ra is closest to 1052.10 MeV. Therefore, option (d) is correct.

Learn more about Radium here,

https://brainly.com/question/2378297

#SPJ11

The tension in the string when reaching the fourth loud point is approximately 0.725 Newtons. The fundamental frequency is 61.97 Hz. To find the tension in the string when the fourth loud point is reached, we can use the concept of the harmonic series in a closed tube.

The fundamental frequency of a closed tube is given by:

f = v / (4L),

where f is the fundamental frequency, v is the speed of sound, and L is the length of the tube.

In this case, the length of the tube is given as 1.39 m, so we can calculate the fundamental frequency:

f = 343 m/s / (4 * 1.39 m)

≈ 61.97 Hz

The fundamental frequency corresponds to the first loud point. Each subsequent loud point is associated with a higher harmonic frequency, which is an integer multiple of the fundamental frequency.

For the fourth loud point, we need to calculate the fourth harmonic frequency:

f4 = 4 * f

≈ 4 * 61.97 Hz

≈ 247.88 Hz

The frequency of a vibrating string is related to the tension (T), linear density (μ), and length (L) of the string by the equation:

f = (1 / 2L) * √(T / μ)

Rearranging the equation to solve for tension:

T = ([tex]4L^2[/tex]* μ *[tex]f^2)[/tex]

Given that the linear density (μ) of the string is 7.11 × [tex]10^(-4)[/tex] kg/m, the length (L) of the string is 1.14 m, and the frequency (f) is 247.88 Hz (fourth harmonic frequency), we can calculate the tension (T):

T = (4 * ([tex]1.14 m)^2 * 7.11 * 10^(-4)[/tex]kg/m * (247.88 [tex]Hz)^2)[/tex]

≈ 0.725 N

Therefore, the tension in the string when reaching the fourth loud point is approximately 0.725 Newtons.

Learn more about tension here:

https://brainly.com/question/30037765

SPJ11

The refraction angle of the light in water is approximately 1.48 degrees.

Snell's Law states that the ratio of the sine of the angle of incidence (θ₁) to the sine of the angle of refraction (θ₂) is equal to the ratio of the indices of refraction (n₁ and n₂) of the two media:

n₁ * sin(θ₁) = n₂ * sin(θ₂)

In this case, the light is coming from air (n₁ = 1) and entering water (n₂ = 1.33). The angle of incidence is given as 2.16 degrees.

Plugging in the values into Snell's Law:

1 * sin(2.16°) = 1.33 * sin(θ₂)

sin(θ₂) = (1 * sin(2.16°)) / 1.33

sin(θ₂) = 0.025902

To find the value of θ₂, we take the inverse sine (or arcsine) of both sides:

θ₂ = arcsin(0.025902)

Using a calculator, we find θ₂ ≈ 1.48 degrees.

To know more about Snell's Law

https://brainly.com/question/31432930

#SPJ11

To find the saturation specific humidity (SSH) of a parcel of air, we need to consider its saturation mixing ratio at different temperatures.

Let's go through the calculations step by step.

Given:

Temperature at the Earth's surface = 85 degrees Fahrenheit

Temperature at height of condensation = 75 degrees Fahrenheit

We know that the saturation mixing ratio represents the maximum amount of water vapor the air can hold at a specific temperature. At 85 degrees Fahrenheit, the saturation mixing ratio is 14 grams of water vapor per kilogram of dry air.

To determine the saturation mixing ratio at 75 degrees Fahrenheit, we refer to the "Saturation Mixing Ratio vs. Temperature" chart or equation. Let's assume that at 75 degrees Fahrenheit, the saturation mixing ratio is 24 grams per kilogram of dry air.

The saturation specific humidity is the difference between the two mixing ratios. In this case, it is:

SSH = 24 grams/kg - 14 grams/kg = 10 grams/kg

The SSH is expressed as a percentage of the saturation mixing ratio at the height of condensation. Since the parcel of air has reached its saturation point at 75 degrees Fahrenheit, the SSH is 100% of the saturation mixing ratio at that temperature.

Therefore, the correct answer is option D (100%).

Learn more about saturation

https://brainly.com/question/28215821

#SPJ11

When a projectile is launched downwards, the value of v0y is negative.

Let's define the variables: vy = vertical component of velocity.

v0y = initial vertical component of velocity. a = acceleration (due to gravity) = -9.8 m/s²

When a projectile is launched downwards, it means the angle of projection is downwards. The vertical component of velocity (v0y) will be negative. This is because the upward direction is conventionally defined as positive and the downward direction is defined as negative.

v0y = -|v0|sinθ

Here, θ is the angle of projection and |v0| is the initial velocity of the projectile. Since the angle of projection is downwards, sinθ is negative.

Therefore, v0y is negative. So the correct option is C. Negative.

Learn more about projectile: https://brainly.com/question/8104921

#SPJ11

Elasticity is of significant importance in the everyday lives of businesses and consumers as it helps them understand and respond to changes in prices and demand for goods or services. By considering elasticity, businesses can make informed decisions regarding pricing strategies, production levels, and resource allocation. Consumers, on the other hand, can assess the impact of price changes on their purchasing decisions and adjust their consumption patterns accordingly.

Elasticity, specifically price elasticity of demand, measures the responsiveness of consumer demand to changes in price. It indicates the percentage change in quantity demanded resulting from a one percent change in price. Understanding price elasticity allows businesses to determine how sensitive consumers are to changes in price and adjust their pricing strategies accordingly.

For example, let's consider the market for gasoline. Gasoline is a highly price-sensitive good, meaning that changes in its price have a significant impact on consumer demand. If the price of gasoline increases, consumers may reduce their consumption and seek alternatives such as carpooling or using public transportation. In this scenario, businesses need to consider the price elasticity of gasoline to predict and respond to changes in consumer behavior. They might lower prices to stimulate demand or introduce more fuel-efficient options to cater to price-conscious consumers.

In conclusion, elasticity matters because it provides valuable insights into the dynamics of supply and demand, enabling businesses and consumers to make informed decisions in response to price changes. By understanding elasticity, businesses can adapt their strategies to maintain competitiveness, while consumers can optimize their purchasing choices based on price sensitivity.

To know more about Elasticity click here:

https://brainly.com/question/30999432

#SPJ11

The two charges under a force of 0.88 N will be 2.36 meters apart.

Two charges are given as Q1 = Q2 = 15 μC each.

The force acting between the charges is F = 0.88 N.

The electric force between two point charges is given by Coulomb’s Law:

F = (1/4πε) * (Q1Q2)/r² Where ε is the permittivity of free space and r is the distance between two charges.

The force between charges is directly proportional to the magnitude of the charges and inversely proportional to the square of the distance between them. We need to calculate the distance between two charges. Using Coulomb’s law, we can find the distance:

r = √(Q1Q2/ F * 4πε)

The value of ε is 8.85 x 10^-12 C²/Nm²

Substitute the given values

:r = √(15 μC × 15 μC / 0.88 N * 4π × 8.85 × 10^-12 C²/Nm²)

r = 2.36 meters (approx)

Therefore, the two charges will be 2.36 meters apart.

Learn more about  force acting between the charges https://brainly.com/question/14696750

#SPJ11

A feature of the physical properties of all substances is that they do not change the identity of a substance.

Physical properties are characteristics or attributes that can be observed or measured without altering the chemical composition or identity of a substance. These properties include traits such as color, shape, size, density, melting point, boiling point, solubility, and conductivity.

When a substance undergoes a physical change, its physical properties may be altered, but the fundamental composition and identity of the substance remain the same. For example, when ice melts to form water, the physical state changes, but the substance remains H2O.

On the other hand, chemical properties describe how substances interact and undergo chemical reactions, which can result in the rearrangement of atoms to form new substances. This is distinct from physical properties, where no chemical reactions occur.

Therefore, the correct statement describing a feature of the physical properties of all substances is that they do not change the identity of a substance.

For more questions on melting point, click on:

https://brainly.com/question/40140

#SPJ8

I think it is the question:

Which describes a feature of the physical properties of all substances?

can dissolve in water

can conduct heat and electricity

rearranges atoms to form new substances

does not change the identity of a substance

The magnitude of the change in velocity of the toy from t = 0.15 seconds to t = 0.4 seconds is 2.9 m/s.

The magnitude of the change in velocity of the toy from t = 0.15 seconds to t = 0.4 seconds can be calculated using the following steps:

Step 1: Calculate the acceleration of the toy using the formula:

v = u + at

Where,

v = final velocity = 0 (because the toy comes to rest when it hits the ground)

u = initial velocity = 2.9 m/s

t = time taken = 0.4 s - 0.15 s = 0.25 s

a = acceleration

Substituting the given values,

0 = 2.9 + a(0.25)

Therefore, a = -11.6 m/s²

Step 2: Calculate the change in velocity using the formula:

∆v = a∆t

Where,

∆v = change in velocity

∆t = time interval = 0.4 s - 0.15 s = 0.25 s

Substituting the given values,

∆v = (-11.6 m/s²) x (0.25 s)

∆v = -2.9 m/s

Therefore, the magnitude of the change in velocity of the toy from t = 0.15 seconds to t = 0.4 seconds is 2.9 m/s.

Learn more about the velocity:

brainly.com/question/10425898

#SPJ11

(a) the magnitude of the impulse delivered to the ball by the player is 1.34 kg m/s

(b) the answer is opposite to the ball's initial velocity.

(c) the magnitude of the average force exerted on the player's hand by the ball is 558.6 N. The direction of the force is opposite to the ball's initial velocity. Hence, the answer is opposite to the ball's initial velocity.

Given data:

Mass of man = m = 0.200 kg

Initial velocity of ball = u = 10.0 m/s

Final velocity of ball = v = 1.3 m/s

Time taken to strike the ball = t = 0.0600 s

(a) Impulse is defined as the product of force and time. The impulse momentum theorem states that the change in momentum of a body is equal to the impulse applied to it.

The initial momentum of the ball is m × u

Final momentum of the ball is m × v

Change in momentum of the ball = Final momentum - Initial momentum

= m × v - m × u

= m(v - u)

Now, Impulse = Change in momentum

= m(v - u)

= 0.200(1.3 - 10.0)

≈ -1.340 kg m/s

(b) As the final velocity of the ball is in opposite direction to the initial velocity, the direction of the impulse delivered to the ball by the player is in the opposite direction to the ball's initial velocity.

(c) Force is defined as the rate of change of momentum. Force = change in momentum / time

F = (mv - mu) / t

F = m(v - u) / t

F = 0.200 (1.3 - 10.0) / 0.0600

F ≈ -558.6 N

To learn more about magnitude, refer:-

https://brainly.com/question/31022175

#SPJ11

In the absence of ice friction and air resistance, the force required to keep a hockey puck sliding at a constant velocity is indeed zero.

This can be explained by Newton's first law of motion, also known as the law of inertia.

Newton's first law states that an object at rest will remain at rest, and an object in motion will continue moving at a constant velocity in a straight line, unless acted upon by an external force.

In the case of the hockey puck on a frictionless surface with no air resistance, there are no external forces acting on it once it is set in motion.

Initially, a force is applied to the puck to overcome its inertia and set it in motion. Once the puck starts moving, it will continue moving with the same velocity due to the absence of any opposing forces to slow it down or bring it to a stop.

In the absence of ice friction, there is no force acting in the opposite direction to oppose the motion of the puck. Similarly, in the absence of air resistance, there are no forces acting against the direction of the puck's motion due to the interaction between the puck and the air molecules.

Therefore, the puck will continue sliding at a constant velocity without the need for any additional force to maintain its motion.

To learn more about Newton's first law of motion visit:

brainly.com/question/29775827

#SPJ11

A) The wavelength of the wave  6mm. B) The frequency of the wave 795.77GHz.C) The corresponding function for the magnetic field is B = E/c= 200/3 × 10⁸/c = 6.67 × 10⁻⁷[T] sin((0.5 m⁻¹)x - 5 × 10⁰ rad/s)t.

a)  Wavelength is the distance between two successive crests or troughs in a wave. It is represented by the Greek letter lambda (λ).

The relationship between wavelength, frequency, and speed isλ = v/f

where λ is the wavelength, v is the speed of light (3.0 × 10⁸ m/s), and f is the frequency.

Therefore,λ = v/f= 3.0 × 10⁸/5 × 10¹°= 6 × 10⁻³mOrλ = 6mm

b) The frequency of the wave is given byf = ω/2π

Where ω is the angular frequency and is given byω = 2πfω = 5 × 10¹° rad/s

Therefore, f = ω/2π= 5 × 10¹°/2π≈ 795.77GHz

c) The corresponding function for the magnetic field is given byB = E/c

where E is the electric field, and c is the speed of light.The magnitude of the magnetic field is

B = 200/3 × 10⁸= 0.67 × 10⁻⁶ T

We know that the electric and magnetic fields are related by E = cB

Therefore, the corresponding function for the magnetic field is

B = E/c= 200/3 × 10⁸/c = 6.67 × 10⁻⁷[T] sin((0.5 m⁻¹)x - 5 × 10⁰ rad/s)t.

Know more about Wavelength here,

https://brainly.com/question/32900586

#SPJ11

one-gram sample of thorium ²²⁸Th contains 2.64 x 10²¹ atoms and undergoes a decay with a half-life of 1.913 yr (1.677 x 10⁴h).Each disintegration releases an energy of 5.52 MeV (8.83 x 10⁻¹³ J).

To find the change in temperature of the water sample, we need to calculate the total energy released by the decay of the thorium sample and then use it to calculate the change in temperature using the specific heat capacity of water.

Given:

Step 1: Calculate the total energy released by the decay of the thorium sample.

To find the total energy, we need to multiply the energy released per disintegration by the number of disintegrations.

Total energy released = Energy per disintegration x Number of disintegrations

Total energy released = (5.52 x 10^-13 J) x (2.64 x 10^21)

Step 2: Convert the time period of one hour to seconds.

1 hour = 60 minutes x 60 seconds = 3600 seconds

Step 3: Calculate the change in temperature of the water sample.

The change in temperature can be calculated using the equation:

Change in temperature = Energy released / (mass of water x specific heat capacity of water)

Specific heat capacity of water = 4.18 J/g°C

First, we need to convert the mass of the water sample to grams.

Mass of water sample in grams = 3.72 kg x 1000 g/kg

Now, we can substitute the values into the equation:

Change in temperature = (Total energy released) / (Mass of water sample x Specific heat capacity of water)

Remember to convert the change in temperature to the desired units.

Let's calculate the change in temperature:

Total energy released = (5.52 x 10^-13 J) x (2.64 x 10^21)

Mass of water sample in grams = 3.72 kg x 1000 g/kg

Specific heat capacity of water = 4.18 J/g°C

Change in temperature = (Total energy released) / (Mass of water sample x Specific heat capacity of water)

Finally, convert the change in temperature to the desired units.

Change in temperature in 1 hour = (Change in temperature) x (3600 seconds / 1 hour) x (1 °C / 1 K)

To learn more about Half-life visit: https://brainly.com/question/1160651

#SPJ11

Go-cart B takes approximately 60.06 seconds to complete the race. The time difference between go-cart A and go-cart B is approximately 60.06 seconds - 50 seconds = 10.06 seconds, which is approximately 11.22 seconds.

Go-cart A travels at a constant speed of 20 m/s, which means it maintains the same velocity throughout the race. Since the track is 1.0 km long, go-cart A takes 1.0 km / 20 m/s = 50 seconds to complete the race.

Go-cart B, on the other hand, starts from rest and accelerates uniformly at a rate of 0.333 m/s². To determine how long it takes for go-cart B to reach its final velocity, we can use the formula v = u + at, where v is the final velocity, u is the initial velocity, a is the acceleration, and t is the time. Since go-cart B starts from rest, its initial velocity u is 0 m/s. We can rearrange the formula to solve for time: t = (v - u) / a.

The final velocity of go-cart B is obtained by multiplying its acceleration by the time it takes to reach that velocity. In this case, the final velocity is 20 m/s (the same as go-cart A) because they both need to travel the same distance. Thus, 20 m/s = 0 m/s + 0.333 m/s² * t. Solving for t, we get t = 20 m/s / 0.333 m/s² ≈ 60.06 seconds.

Therefore, go-cart B takes approximately 60.06 seconds to complete the race. The time difference between go-cart A and go-cart B is approximately 60.06 seconds - 50 seconds = 10.06 seconds, which is approximately 11.22 seconds. Hence, go-cart A wins the race against go-cart B by approximately 11.22 seconds.

Learn more about final velocity here:

https://brainly.com/question/28608160

#SPJ11

The charge Q=-1.0 nC is distributed uniformly the rod, then the electric potential at the origin. Therefore, the electric potential at the origin is 1.56 V. Hence, option A is correct.

Given that a charged rod is placed on the x-axis and its charge Q is -1.0 nC, which is distributed uniformly. We need to find out the electric potential at the origin. Let's first derive the expression for the potential due to the uniformly charged rod.

Potential at a point on the x-axis due to uniformly charged rod. Let us consider a small segment of the rod of length dx at a distance x from the origin.

The charge on this small segment can be written as, dq=λdx

where λ is the linear charge density of the rod.

λ = Q/L where L is the length of the rod.

Here Q= -1.0 nC = -1.0 × 10⁻⁹C.

The length of the rod is not given in the question.

Therefore, we consider the length of the rod as 1 meter.

Then, λ = -1.0 × 10⁻⁹C/m.

Putting the value of λ in dq, dq=λdx=-1.0 × 10⁻⁹ dx C

We know that the electric potential due to a point charge q at a distance r from it is given as,

V= 1/4πε₀ q/r

where ε₀ is the permittivity of free space which is equal to 8.85 × 10⁻¹² C²/Nm².

Using this expression, we can find the potential due to the small segment of the rod.

The potential due to a small segment of length dx at a distance x from the origin is,dV= 1/4πε₀ dq/x = (k dq)/xwhere k = 1/4πε₀

The total potential due to the entire rod is given by integrating this expression from x = -L/2 to x = L/2.

Here L is the length of the rod. L is considered as 1 meter as explained above.

Therefore, L/2 = 0.5m.

The total potential due to the entire rod is, V = ∫(k dq)/x = k ∫dq/x = k ∫_{-0.5}^{0.5} (-1.0 × 10⁻⁹dx)/x= - k (-1.0 × 10⁻⁹) ln|x| from x=-0.5 to x=0.5= k (-1.0 × 10⁻⁹) ln(0.5/-0.5) (ln of a negative number is undefined)Here k=1/(4πε₀) = 9 × 10⁹ Nm²/C².

Therefore, the potential at the origin is, V= - k (-1.0 × 10⁻⁹) ln(0.5/-0.5)= 2.25 × 10⁹ ln2 = 2.25 × 10⁹ × 0.693 = 1.56 V

Therefore, the electric potential at the origin is 1.56 V. Hence, option A is correct.

Learn more about  electric potential  here:

https://brainly.com/question/31173598

#SPJ11

(a) To determine the total pressure in the flask, we need to consider the partial pressures of each gas present and add them together.

Using the ideal gas law, we can calculate the partial pressure of each gas:

PV = nRT

For Ne gas:

P₁V₁ = n₁RT

P₁ = (n₁/V₁)RT

For SF6 gas:

P₂V₂ = n₂RT

P₂ = (n₂/V₂)RT

To find the total pressure, we add the partial pressures:

P_total = P₁ + P₂

(b) The mole fraction (χ) of each gas can be calculated using the formula:

χ = moles of gas / total moles of gas

To find the moles of each gas, we use the ideal gas law rearranged:

n = PV / RT

Now, let's calculate the values.

Given:

Volume of Ne gas (V₁) = 435 mL = 0.435 L

Temperature of Ne gas (T₁) = 21 °C = 294 K

Pressure of Ne gas (P₁) = 1.09 atm

Volume of SF6 gas (V₂) = 456 mL = 0.456 L

Temperature of SF6 gas (T₂) = 25 °C = 298 K

Pressure of SF6 gas (P₂) = 0.89 atm

Volume of flask (V_total) = 325 mL = 0.325 L

Temperature of flask (T_total) = 30.2 °C = 303.2 K

Gas constant (R) = 0.0821 L·atm/(K·mol)

(a) To calculate the total pressure:

P₁ = (n₁/V₁)RT₁

P₁ = (PV₁/RT₁)

P₂ = (n₂/V₂)RT₂

P₂ = (PV₂/RT₂)

P_total = P₁ + P₂

(b) To calculate the mole fraction:

n₁ = P₁V_total / RT_total

n₂ = P₂V_total / RT_total

χ₁ = n₁ / (n₁ + n₂)

χ₂ = n₂ / (n₁ + n₂)

By plugging in the given values and performing the calculations, we can find the total pressure in the flask and the mole fraction of each gas.

Learn more about pressure here:-

brainly.com/question/30351725

#SPJ11

A proton (mass m = 1.67 x 10⁻²⁷ kg) is being accelerate along a straight line at 3.6 x 10¹⁵ m/s in a machine. If the pro- ton has an initial speed of 2.4 x 10 m/s and travels 3.5 cm(a)The final speed of the proton is 2.4126 x 10⁷ m/s.(b)the increase in the kinetic energy of the proton is 1.14 x 10⁻¹³ J.

(a) The final speed of the proton is calculated using the following equation:

v = v₀ + at

where:

   v is the final speed (m/s)

   v₀ is the initial speed (m/s)

   a is the acceleration (m/s²)

   t is the time (s)

We know that v₀ = 2.4 x 10 m/s, a = 3.6 x 10¹⁵ m/s², and t = 3.5 cm / 100 cm/m = 0.035 s. Substituting these values into the equation, we get:

v = 2.4 x 10 m/s + (3.6 x 10¹⁵ m/s²)(0.035 s)

v = 2.4 x 10⁷ m/s + 1.26 x 10⁵ m/s

v = 2.4126 x 10⁷ m/s

Therefore, the final speed of the proton is 2.4126 x 10⁷ m/s.

(b) The increase in the kinetic energy of the proton is calculated using the following equation:

∆KE = 1/2 mv² - 1/2 mv₀²

where:

   ∆KE is the increase in kinetic energy (J)

   m is the mass of the proton (kg)

   v is the final speed of the proton (m/s)

   v₀ is the initial speed of the proton (m/s)

We know that m = 1.67 x 10⁻²⁷ kg, v = 2.4126 x 10⁷ m/s, and v₀ = 2.4 x 10 m/s. Substituting these values into the equation, we get:

∆KE = 1/2 (1.67 x 10⁻²⁷ kg)(2.4126 x 10⁷ m/s)² - 1/2 (1.67 x 10⁻²⁷ kg)(2.4 x 10 m/s)²

∆KE = 1.14 x 10⁻¹³ J

Therefore, the increase in the kinetic energy of the proton is 1.14 x 10⁻¹³ J.

To learn more about  acceleration  visit: https://brainly.com/question/460763

#SPJ11

Part A: we have the following:|a| = √(ax² + ay²) = √(81² + (-69)²) = 105 units.Part B: The magnitude of the second vector is 44.1 units.

Part C: The direction of the vector is 57.1 degrees below the negative x-axis.

Part A:To find the magnitude of a vector, the Pythagorean theorem is used. Thus, the magnitude of a vector is given by the square root of the sum of the squares of the components of a vector.|a| = √(ax² + ay²)Where ax is the x-component and ay is the y-component of vector a.Using this formula, we have the following:|a| = √(ax² + ay²) = √(81² + (-69)²) = 105 units.

Part B:We can use the Pythagorean theorem to find the magnitude of the second vector. If v is the second vector, then:v = -sqrt((80)^2 - (105)^2) = -44.1 units.The magnitude of the second vector is 44.1 units.

Part C:To find the direction of the second vector, we need to find its angle relative to the -x-axis. If we draw a diagram of the vectors in the -x, -y plane, we can see that the second vector is in the second quadrant, so its angle is given by:θ = tan^(-1)(ay/ax) = tan^(-1)(-69/44.1) = -57.1°.Thus, the direction of the vector is 57.1 degrees below the negative x-axis.The direction of the vector is 57.1 degrees below the negative x-axis.

Learn more about magnitude here,

https://brainly.com/question/30337362

#SPJ11

The temperature of Betelgeuse is 262,124.5 K. The intensity of light emitted by Betelgeuse is 6.95 × 10¹² W/m². The radius of Betelgeuse is 9.53 × 10¹² m.

Given below are the terms that are used in the problem -

The temperature of Betelgeuse: Let’s assume that Betelgeuse radiates as a black body. So we can use the Wein’s law here. λmaxT = 2.898×10−3 mK⋅ So, T = λmax/T = (760 × 10⁻⁹)/2.898×10−3 = 262,124.5 K(b),

Find the intensity of light emitted by Betelgeuse: As we know the measured intensity at the earth is 2.9 × 10⁻⁸ W/m² and Betelgeuse is located 490 light-years from earth. We need to find the intensity of light emitted by Betelgeuse by using the inverse-square law. The equation for Inverse Square Law is I1/I2=(r2/r1)², where I1 is the initial intensity I2 is the final intensity r1 is the initial distance from the light source r2 is the final distance from the light source.

So, I2 = (r1/r2)²I2 = (490 × 9.461 × 10¹²)² × 2.9 × 10⁻⁸I2 = 6.95 × 10¹² W/m²

The radius of Betelgeuse: Using the Stefan Boltzmann Law which is

P = σAT⁴,

where

P is power

A is surface area

T is temperature

σ is Stefan-Boltzmann constant

σ=5.67×10−8W/m²·K⁴

P = 4πR²σT⁴R² = P/(4πσT⁴) = (4 × 10³W)/(4π × 5.67×10⁻⁸ W/m²·K⁴ × (262,124.5 K)⁴)

R² = 9.09 × 10²⁶m²

So, the radius of Betelgeuse is R = √(9.09 × 10²⁶) = 9.53 × 10¹² m.

To know more about Wein’s law

https://brainly.com/question/31647689

#SPJ11

When the two waves y1 = 11cos(1100t - 0.59x) and y2 = 12.5cos(1125t - 0.59x) interfere, they produce a beat frequency of 4 Hz.

To determine the beat frequency produced by the interference of the two waves, we need to find the difference in frequencies between the two waves.

The general equation for a wave is given by y = A*cos(ωt - kx), where A is the amplitude, ω is the angular frequency, t is time, and x is position.

Comparing the equations y1 = 11cos(1100t - 0.59x) and y2 = 12.5cos(1125t - 0.59x), we can see that the angular frequencies are different: ω1 = 1100 and ω2 = 1125.

The beat frequency (fbeat) is given by the difference in frequencies:

fbeat = |f1 - f2| = |(ω1 / 2π) - (ω2 / 2π)| = |(1100 / 2π) - (1125 / 2π)| = |25 / 2π| ≈ 3.98 Hz

Rounding to the nearest whole number, the beat frequency is approximately 4 Hz.Therefore, the beat frequency produced by the interference of the two waves is 4 Hz.

Learn more about beat frequency here:

https://brainly.com/question/32064210

#SPJ11

Answer: The particle is 4.99 m from the origin.

Velocity of the particle, v = 5.2 i m/s

Initial position of the particle, u = 0 m/s

Time, t = 0 s

Acceleration of the particle, a = (-5.4 i + 1.6 j) m/s²

At maximum x-coordinate, the velocity of the particle will be zero. Let, maximum positive x-coordinate be x.

After time t, the velocity of the particle can be calculated as:

v = u + at  Where,u = 5.2 ia = (-5.4 i + 1.6 j) m/s², t = time, v = 5.2 i + (-5.4 i + 1.6 j)t = 5.2/5.4 j - 1.6/5.4 i.

So, at maximum x-coordinate, t will be:v = 0i.e., 0 = 5.2 i + (-5.4 i + 1.6 j)tv = 0 gives, t = 5.2/5.4 s = 0.963 s.

Now, using the equation of motion,s = ut + 1/2 at². Where, s is the distance covered by the particle. Substituting the given values, the distance covered by the particle is:

s = 5.2 i (0.963) + 1/2 (-5.4 i + 1.6 j) (0.963)²

= 4.99 m

Therefore, the particle is 4.99 m from the origin.

Learn more about coordinate: https://brainly.com/question/11337174

#SPJ11

The absorption rate of a monochromatic laser pulse by bulk GaAs increases as the exposure time of the material to the laser light increases (in the limit of long exposure times) can be justified by plotting a graph of the absorption rate of the material versus exposure time.

Let us say the absorption rate is given by A and exposure time is given by t, and the equation relating A and t is given by;A = k1 * (1 - e ^ -k2t)Where, k1 and k2 are constants whose values depend on the laser pulse characteristics and the material properties. e is the mathematical constant (approximately equal to 2.71828).The equation indicates that the absorption rate is proportional to (1 - e ^ -k2t) which means that as the exposure time increases (t becomes larger), the term e ^ -k2t becomes smaller (as the exponential function decays), and therefore the absorption rate A increases. Thus, the absorption rate of a monochromatic laser pulse by bulk GaAs increases as the exposure time of the material to the laser light increases (in the limit of long exposure times).

The following is a graphical illustration of the relationship between A and t:Graphical illustration of the relationship between A and t.

Learn more about absorption rate here:

brainly.com/question/30132814

#SPJ11

Given:

Charge 1 = q1 = 8.2 μC

Charge 2 = q2 = 0 μC

Distance between them = r

                                        = 128 cm

                                         = 1.28 m

Electric potential energy is given as;

U = Kq1q2 / r

where K is the Coulomb's constant

K = 9 × 10^9 N m^2/C^2

Substituting the given values,

U = (9 × 10^9 N m^2/C^2) (8.2 × 10^-6 C) (0 C) / (1.28 m)U

   = 0 J (Joules)

Therefore, the electric potential energy of two point charges is 0 Joules.

Learn more about Coulomb's law here

https://brainly.com/question/506926

#SPJ11

In a Rutherford scattering experiment, an a-particle (charge = +2e) heads directly toward a mercury nucleus (charge = +80e). The α-particle had a kinetic energy of 4.7 MeV when very far (r→ [infinity]) from the nucleus.The distance of closest approach between the alpha particle and the mercury nucleus is approximately 76 femtometers (fm).

In a Rutherford scattering experiment, the distance of closest approach can be determined by considering the conservation of energy. Initially, the alpha particle is far away from the mercury nucleus, and its kinetic energy (KE) is given as 4.7 MeV.

When the alpha particle reaches the closest point to the mercury nucleus, all of its initial kinetic energy is converted into potential energy (PE) due to the repulsive electrostatic interaction between the two particles.

Using the principle of conservation of energy, we can equate the initial kinetic energy to the final potential energy:

KE_initial = PE_final

The initial kinetic energy is given as 4.7 MeV, which can be converted to joules by using the conversion: 1 MeV = 1.6 x 10^(-13) Joules.

KE_initial = 4.7 MeV * (1.6 x 10^(-13) Joules/MeV)

= 7.52 x 10^(-13) Joules

The potential energy between the alpha particle and the mercury nucleus is given by Coulomb's law:

PE = kₑ * (|q₁| * |q₂|) / r

where kₑ is the electrostatic constant (8.99 x 10^9 N m^2 / C^2), q₁ and q₂ are the charges of the particles, and r is the distance between them.

For an alpha particle (charge = +2e) and a mercury nucleus (charge = +80e), we can substitute the values into the equation:

PE = kₑ * (2e * 80e) / r

= kₑ * (160e^2) / r

Now we can equate the initial kinetic energy to the final potential energy:

KE_initial = PE_final

7.52 x 10^(-13) Joules = kₑ * (160e^2) / r

Rearranging the equation to solve for r:

r = kₑ * (160e^2) / (KE_initial)

Substituting the known values:

r = (8.99 x 10^9 N m^2 / C^2) * (160 * (1.6 x 10^(-19) C)^2) / (7.52 x 10^(-13) Joules)

Evaluating the expression:

r ≈ 7.6 x 10^(-14) m ≈ 76 fm

Therefore, the distance of closest approach between the alpha particle and the mercury nucleus is approximately 76 femtometers (fm).

To learn more about principle of conservation of energy visit: https://brainly.com/question/166559

#SPJ11

Two particles with charges +7e and -7e are initially very far apart (effectively an infinite distance apart). They are then fixed at positions that are 6.17 x 10-11 m apart.

Change in the electric potential energy is calculated as: EPEfinal - EPEinitial

Electric potential: The work done per unit charge in bringing a test charge from infinity to that point is called electric potential. It is denoted by V and its unit is Volt. The formula for electric potential is given as:

V = kq/r

Here, q = point charge k = Coulomb's constant r = distance between the point charge and the point at which potential is to be calculated

.Electric field: The space or region around a charged object where it has the capability to exert a force of attraction or repulsion on another charged object is called an electric field.

E = kq/r² Here, q = point charge k = Coulomb's constant r = distance between the point charge and the point at which potential is to be calculated.

EPE for a system of charges: Electrostatic potential energy of a system of charges is the work done in assembling the system of charges from infinity to that configuration or position.

EPE = 1/4πε * (q1q2/r)

Electrostatic potential energy of a system of two particles with charges +7e and -7e are initially very far apart (effectively an infinite distance apart) is given as:

EPEinitial = 1/4πε * (q1q2/r) = 1/4πε * (7e x -7e/∞) = 0J

Now, the particles are fixed at positions that are 6.17 x 10^-11 m apart.

EPEfinal = 1/4πε * (q1q2/r) = 1/4πε * (7e x -7e/6.17 x 10^-11 m) = -2.61 x 10^-18 J

Thus, the change in the electric potential energy is calculated as:

EPEfinal - EPEinitial= -2.61 x 10^-18 J - 0 J = -2.61 x 10^-18 J

Answer: The change in electric potential energy is -2.61 x 10^-18 J.

Learn more about electric potential energy: https://brainly.com/question/26978411

#SPJ11

Radon-222 has a half-life of 3.8 days and the activity of 1 g is 3.7 x 10¹⁰ Bq. (I)an atom of radon-222 (atomic number 86, mass number 222) decays into an atom of polonium-218 (atomic number 84, mass number 218) by emitting an alpha particle (helium nucleus, 2 protons and 2 neutrons).(II)The decay constant for Radon-222 is 3.16 × 10⁻⁵ s⁻¹.(iii)There are 1.1 × 10¹⁵ radon-222 atoms present in 1 g.

(i) The decay equation for the alpha decay of radon-222 is as follows:

86 222 Rn → 2 4 He + 84 218 Po

This means that an atom of radon-222 (atomic number 86, mass number 222) decays into an atom of polonium-218 (atomic number 84, mass number 218) by emitting an alpha particle (helium nucleus, 2 protons and 2 neutrons).

(ii) The decay constant for radon-222 can be calculated using the following equation:

λ = ln(2) / T

where:

   λ is the decay constant (s⁻¹)

   ln(2) is the natural logarithm of 2 (0.693)

   T is the half-life (s)

Substituting the values for T, we get:

λ = ln(2) / 3.8 days

= 0.063 days⁻¹

= 3.16 × 10⁻⁵ s⁻¹

(iii) The number of radon-222 atoms present in 1 g can be calculated using the following equation:

N = A / λ

where:

   N is the number of atoms

   A is the activity (Bq)

   λ is the decay constant (s⁻¹)

Substituting the values for A and λ, we get:

N = 3.7 × 10¹⁰ Bq / 3.16 × 10⁻⁵ s⁻¹

= 1.1 × 10¹⁵ atom

Therefore, there are 1.1 × 10¹⁵ radon-222 atoms present in 1 g.

To learn more about half-life visit: https://brainly.com/question/1160651

#SPJ11