Which particles change the
charge in atoms when ions are formed?
Answer:
An ion is an atom or group of atoms with a positive or negative charge. Ions form when atoms lose or gain electrons to obtain a full outer shell: For elements in groups 1, 2 and 3, the number of electrons lost is the same as the group number.
Explanation:
If an atom loses or gets electrons, it transforms into a charged particle known as an ion. An ion has a charge equal to the sum of its protons' and electrons' charges.
What are electrons?Electrons is defined as the smallest and negatively charged among the atom's constituent particles. The charge moves from the positive terminal to the negative terminal as a result of the "electrical pressure" brought on by the voltage differential between the positive and negative terminals of a battery.
Depending on whether the number of electrons in an atom is greater or less than the number of protons in the atom, an atom can develop a positive charge or a negative charge. An atom is referred to as an ion when it is drawn to another atom due to an imbalance in its electron and proton numbers.
Thus, if an atom loses or gets electrons, it transforms into a charged particle known as an ion. An ion has a charge equal to the sum of its protons' and electrons' charges.
To learn more about electrons, refer to the link below:
https://brainly.com/question/1255220
#SPJ2
what is the empirical formula for ribose?
Answer:
The empirical formula of ribose (a sugar) is CH2O. In a separate experiment, using a mass spectrometer, the molar mass of ribose was determined to be 150 g/mol.Explanation:
Answer:
The empirical formula of ribose (a sugar) is CH2O. In a separate experiment, using a mass spectrometer, the molar mass of ribose was determined to be 150 g/mol.
Explanation:
What does the World Skin Cancer Map tell you about how the skin cancer rates of Australia and Brazil differ?
The World Skin Cancer Map shows that Australia has much higher skin cancer rates than Brazil. In Australia, an estimated 5.4 out of 100 people will develop melanoma in their lifetime, compared to 0.4 out of 100 in Brazil.
What is Skin Cancer?Skin cancer is a type of cancer that affects the skin cells. It is caused by over-exposure to ultraviolet (UV) radiation from the sun and sun beds. It is the most common type of cancer in the United States, and can affect anyone, regardless of age, gender, or skin color. It is very important to protect your skin from the sun by using sunscreen.
Australia also has higher rates of non-melanoma skin cancer, with estimated rates of 24.3 out of 100 people in Australia, compared to 5.3 out of 100 people in Brazil.
To learn more about Skin Cancer
https://brainly.com/question/13774153
#SPJ1
Tienen capacidad de fijar enerjgia luminosa utilizando agua y co2 para transformarlo en carbohidratos
Answer:
las plantas
Explanation:
Las plantas son los seres vivos capaces de transformar energía luminosa utilizando agua y dióxido de carbono (CO₂) en energía química en forma de moléculas llamadas carbohidratos. El proceso a través del cual realizan esto se denomina fotosíntesis, y para ello requieren un pigmento de color verde denominado clorofila, el cual es necesario para captar la energía luminosa proveniente del Sol.
If you react 9.8 grams of Zn, how many moles of H2 can you make?
Please help. 100 points
Answer:
Term
Liquid C) takes the shape and volume of an entire container
Plasma A) charged particles that do not have a definite shape or volume
Solid B) has a fixed volume and shape
Gas D) assumes the shape of the part of the container from the bottom up
Read the following chemical equation.
Cl2 (g) + K+ Br− → K+ Cl− + Br2 (g)
What most likely happens during this reaction? (5 points)
Potassium loses an electron.
Potassium gains an electron.
Bromine loses an electron.
Bromine gains an electron.
In the chemical equation,Cl₂ (g) + K+ Br− → K+ Cl− + Br₂ (g) bromine looses an electron in the reaction.
What is chemical equation?Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.
The first chemical equation was put forth by Jean Beguin in 1615.By making use of chemical equations the direction of reaction ,state of reactants and products can be stated. In the chemical equations even the temperature to be maintained and catalyst can be mentioned.
Learn more about chemical equation,here:
https://brainly.com/question/28294176
#SPJ1
how many miles of a gas at 100 c does it take to fill a 1.00 l flask to a pressure of 152kPa
The complete question is as follows: How many moles of a gas at 100 c does it take to fill a 1.00 l flask to a pressure of 152kPa
Answer: There are 0.0489 moles of a gas at [tex]100^{o}C[/tex] is required to fill a 1.00 l flask to a pressure of 152kPa.
Explanation:
Given: Volume = 1.00 L,
Pressure = 152 kPa (1 kPa = 1000 Pa) = 152000 Pa
Convert Pa into atm as follows.
[tex]1 Pa = 9.86 \times 10^{-6} atm\\152000 Pa = 152000 \times \frac{9.86 \times 10^{-6}atm}{1 Pa}\\= 1.5 atm[/tex]
Temperature = [tex]100^{o}C = (100 + 273) K = 373 K[/tex]
Using the ideal gas formula as follows.
PV = nRT
where,
P = pressure
V = volume
n = no. of moles
R = gas constant = 0.0821 L atm/mol K
T = temperature
Substitute the values into above formula as follows.
[tex]PV = nRT\\1.5 atm \times 1.0 L = n \times 0.0821 L atm/mol K \times 373 K\\n = \frac{1.5 atm \times 1.0 L}{0.0821 L atm/mol K \times 373 K}\\n = 0.0489 mol[/tex]
Thus, we can conclude that there are 0.0489 moles of a gas at [tex]100^{o}C[/tex] is required to fill a 1.00 l flask to a pressure of 152kPa.
Assume that you want to create 50.0 g aqueous solution that is 6.213% by mass sodium chloride. How many grams of sodium chloride should you start with
With 3.11 grams of sodium chloride we should start to make an aqueous solution of 50. 0 gm.
When water is used as a solvent then the solution is called the aqueous solution. Water is a good solvent which is naturally abundant and in chemistry, the word "solution" refers to the aqueous solution unless the solvent is specified. It is denoted by "aq".
Mass of aqueous solution = 50 gm
Mass percentage of sodium chloride = 6.213%
Let the mass of sodium chloride is N grams, then,
N = (50/100) × 6.213 gm
N = 0.5 × 6.213
N = 3.11 grams
To know more about sodium chloride, here
https://brainly.com/question/30021413
#SPJ4
A bleaching solution requires 6. 55 g of sodium hypochlorite. How many grams of a 21. 5% by mass solution of sodium hypochlorite should be used
A bleaching solution requires 6. 55 g of sodium hypochlorite. 30.47 grams of a 21. 5% by mass solution of sodium hypochlorite should be used
Mass of sodium hypochlorite = 6.55 g
percent composition = 21. 5%
This indicates that there are 21.5 grams of sodium hypochlorite present in every one hundred grams of solution.
Now calculate the number of grams of solution for 6.55 g of solution.
(6.55 g x 100) / 21.5 g = 30.47 g
Therefore, you will need 30.47 grams of a sodium hypochlorite solution that has a mass concentration of 21.5% in order to obtain 6.55 grams of sodium hypochlorite.
You can also learn about percent composition from the following question:
https://brainly.com/question/17505281
#SPJ4
Instructions: Use the following scenario for questions 2 and 3.
Scenario: The chef places cold water in a pot, places the pot on the stove, and monitors its temperature as time passes. Which of these BEST describes the changes the chef sees occurring at different stages of heating the pot of water?
Before the water begins to boil, thermal energy _____.
remains the same.
increases.
decreases.
Thermal energy increases before the water begins to boil.
Thermal energy is produced when the atoms and molecules in matter vibrate faster due to an increase in temperature. As the average kinetic energy of its particles increases, the thermal energy of the object increases.
After reaching water at its boiling point thermal energy remain same because temperature remain constant after reaching once at boiling point. Thermal energy is directly proportional to temperature. Hence, chef will notice two phenomena during water begins to boil.
Learn more about thermal energy visit:
brainly.com/question/7541718
#SPJ4
Please help, would be greatly appreciated!
According to the stoichiometry of the given chemical equation 102.03 g of Al₂O₃ is formed from 54 g of aluminium.
What is stoichiometry?It is the determination of proportions of elements or compounds in a chemical reaction. The related relations are based on law of conservation of mass and law of combining weights and volumes.
Stoichiometry is used in quantitative analysis for measuring concentrations of substances present in the sample. As per stoichiometry of the given chemical equation, 107.92 g aluminium gives 203.92 g Al₂O₃, thus 54 g aluminium will give 54×203.92/107.92=102.03 g.
Thus, 102.03 g of Al₂O₃ is formed from 54 g of aluminium.
Learn more about stoichiometry,here:
https://brainly.com/question/9743981
#SPJ1
The "Great Ocean Conveyor Belt" is an ocean current that helps move heat energy around the earth and keeps our atmosphere more liveable. This ocean current is caused by differences in water density. These differences are caused mainly by
A.) Chemical content and surface winds
B.) Salinity and surface winds
C.) Water temperatures and salinity
D.) Water temperatures and geographical formations
I NEED ANSWER ASAP
The ocean current is caused by differences in water density. The difference in the density of water is mainly caused by the temperature and salinity of water.
What is density?Density of a substance is the measure of its mass per unit volume. It describes how closely its particles are packed within a given volume. Density of a substance is dependent on the temperature and pressure also.
The density of water is affected by the temperature and salinity. Water has its maximum density at 4 ° C. The more saline is water, more will be the density. Because, more ions or salts makes water denser.
The density vary with variations in temperature and salinity. This variation causes water currents from the denser areas to the less dense areas. Ocean currents are also affected by the gravity.
Find more on ocean currents:
https://brainly.com/question/14426457
#SPJ2
How does thermal energy flow between a hot or cold pack and the atmosphere?
A. Both hot and cold packs absorb energy from the atmosphere.
B. Hot packs release energy into the atmosphere and cold packs absorb energy from the atmosphere.
C. Both hot and cold packs release energy from the atmosphere.
D. Hot packs absorb energy from the atmosphere and cold packs release energy into the atmosphere
Thermal energy flow between a hot or cold pack and the atmosphere by the D. Hot packs absorb energy from the atmosphere and cold packs release energy into the atmosphere.
When a hot pack is applied to the skin, the heat energy stored inside the pack is transferred to the skin, by conduction, and the heat energy is absorbed by the skin. Cold packs work in the opposite way, the cold energy stored inside the pack is transferred to the skin and released into the atmosphere.
The heat energy is conducted out of the pack and then radiated out into the atmosphere in the case of a cold pack, and The heat energy is conducted into the pack and then radiated out into the atmosphere in the case of a hot pack.
Learn more about thermal energy flow here: https://brainly.com/question/4820001
#SPJ4
What two molecules make up aspartame?
Aspartic acid and phenylalanine are the two amino acids that make up aspartame, along with methanol. When the body processes this third key ingredient, formaldehyde and formic acid are produced.
Materials, Raw Two amino acids, phenylalanine and aspartic acid, as well as methanol, make up aspartame. L-aspartyl-L-phenylalanine methyl ester is its formal chemical name. Proteins are made up of amino acids, which are frequently referred to as the building blocks of proteins. Aspartame has the chemical formula C14H18N2O5. In foods and beverages, aspartame, a synthetic, non-saccharide sweetener that is 200 times sweeter than sucrose, is frequently used as a sugar substitute. The commercial names for it are NutraSweet, Equal, and Canderel.
Learn more about aspartame here:
https://brainly.com/question/9352908
#SPJ4
If the molar heat of combustion of liquid benzene at constant volume and 300k is -3272KJ. Calculate the heat of combustion at constant pressure at thesame temperature
Answer:
The heat at constant pressure is -3,275.7413 kJ
Explanation:
The combustion equation is 2C₆H₆ (l) + 15O₂ (g) → 12CO₂ (g) + 6H₂O (l)
[tex]\Delta n_g[/tex] = (12 - 15)/2 = -3/2
We have;
[tex]\Delta H = \Delta U + \Delta n_g\cdot R\cdot T[/tex]
Where R and T are constant, and ΔU is given we can write the relationship as follows;
[tex]H = U + \Delta n_g\cdot R\cdot T[/tex]
Where;
H = The heat at constant pressure
U = The heat at constant volume = -3,272 kJ
[tex]\Delta n_g[/tex] = The change in the number of gas molecules per mole
R = The universal gas constant = 8.314 J/(mol·K)
T = The temperature = 300 K
Therefore, we get;
H = -3,272 kJ + (-3/2) mol ×8.314 J/(mol·K) ×300 K) × 1 kJ/(1000 J) = -3,275.7413 kJ
The heat at constant pressure, H = -3,275.7413 kJ.
What happens to a glass of pure fruit juice when water is added to it?
a
The number of moles of fruit juice increases.
b
The number of moles of fruit juice decreases.
c
The molarity of the juice increases.
d
The molarity of the juice decreases.
Answer:
D is the answer i think
When we add water to a glass of pure fruit the volume of the solution increases while the solute remains constant so the molarity of the juice decreases.
What is Molarity ?Molarity is defined as the amount of solute (in moles)in per litre of solution.
It is also known as molar concentration of a solution , It is expressed in mol/l .
When water is added the volume of the solution is increasing for fixed moles of juices therefore ,
The molarity of the juice will decrease and option d is correct.
To know more about molarity
https://brainly.com/question/2817451
#SPJ2
The activation energy of a first order reaction is 83. 5kJ/mol. The rate constant is 3. 54x10^-5s^-1 at 45 C. What is the rate constant at 65 C?
The rate constant at 65 C is k65= 4.8 x 10^-5 s^-1 .Below is the explanation for the answer
To find the rate constant at a different temperature, you can use the Arrhenius equation, which relates the rate constant to the activation energy and the temperature. The equation is:
k = A * e^(-Ea/RT)
where
k is the rate constant,
A is the pre-exponential factor (also known as the frequency factor),
Ea is the activation energy,
R is the universal gas constant,
T is the absolute temperature.
We are given that the activation energy is 83.5 kJ/mol and the rate constant at 45 C is 3.54 x 10^-5 s^-1. To find the rate constant at 65 C, we can substitute these values into the equation and solve for k.
k = A * e^(-Ea/RT)
k = 3.54 x 10^-5 s^-1 * e^(-(83.5 kJ/mol) / (8.314 J/mol*K * (45 + 273.15 K))
However, A is a constant that we don't know. To find the rate constant at 65 C, we can use the fact that the rate constant is proportional to the temperature. Therefore, we can find the ratio of the rate constants at 65 C and 45 C, then multiply it by the rate constant at 45 C to find the rate constant at 65 C.
k65/k45 = (T2/T1)^n
where
k65 is the rate constant at 65 C
k45 is the rate constant at 45 C
T2 is the temperature in Kelvin (65 + 273.15)
T1 is the temperature in Kelvin (45 + 273.15)
n is the order of the reaction, which is 1 in this case
we can find the rate constant at 65 C is:
k65 = k45 (T2/T1)^n
k65 = 3.54 x 10^-5 s^-1 * ( (65 + 273.15) / (45 + 273.15) )^1
k65= 4.8 x 10^-5 s^-1
Learn more about Rate Constant here: brainly.com/question/14977272
#SPJ4
Give an example of direct and indirect evidence geologists use to study the interior of the Earth
Direct evidence for the interior of the Earth comes from measurements and samples that are taken directly from the Earth's interior. This can include things like rock samples from deep mines, or measurements of seismic waves that have traveled through the Earth.
One example of direct evidence is rock samples that have been brought to the surface by volcanic eruptions or other means. These samples can provide geologists with information about the composition and structure of the Earth's interior. For example, by studying the minerals in a rock sample, geologists can infer the temperatures and pressures that existed in the Earth's interior when the rock was formed.
Indirect evidence, on the other hand, is information that has been inferred from measurements or observations that are not taken directly from the Earth's interior. One example of indirect evidence is the study of seismic waves, which are waves of energy that travel through the Earth's interior in response to earthquakes or other disturbances. By measuring the speed at which these seismic waves travel through the Earth, geologists can infer the density and composition of the materials that make up the Earth's interior.
How many milliliters of 0.25 M solution of silver nitrate is needed to react with
sodium chloride to produce 7.6 g of silver chloride?
Answer:
To find molarity we must convert grams KCl to moles KCl and mL solution to L: ... EXAMPLE: What mass of potassium chloride would be needed to prepare 250.0 mL of a 0.500 ... EXAMPLE: Silver nitrate solution is added to 25.00 mL of a 0.500 M potassium chloride ... g) 0.655 g of sodium carbonate in 100.0 mL of solution.
Explanation:
Changing the amplitude of a sound waves changes dat what
1.how loud da sound is
2.the tone of the sound
3.the pitch of the sound
4.how fast the sound travels
Answer:
Explanation:
the lower the kinetic energy of the solute particles:
Answer:
the higher the kinetic energy
Explanation:
because their will be easy movement of particles.
What's the difference between a hypothesis and a theory?
Answer:
C. Theories have been confirmed through tests; hypotheses haven't.
Hope this helps!!
When using a dangerous chemical such as glutaraldehyde, what would the CDC recommend for reducing the risk of illness
Chemical: Wear the proper personal protective equipment (PPE) such as gloves, goggles, and an apron or lab coat.
What is chemical?Chemistry is the scientific study of the composition, structure, properties, and reactions of matter, especially at the atomic and molecular levels.
Use the chemical in a well-ventilated area.
Follow safety instructions and product labeling instructions precisely.
Avoid breathing vapors or mists of the chemical.
Immediately wash hands and exposed skin thoroughly with soap and water after contact with the chemical.
Store the chemical in a secure location away from food, drink, and other materials.
Dispose of the chemical properly.
To learn more about chemical
https://brainly.com/question/26487468
#SPJ4
A spirit burner used 1.00 g methanol to raise the temperature of 100.0 g water in a metal can from 28.00C to 58.0C. Calculate the heat of combustion in kJ/mol.
Complete question:
A spirit burner used 1.00 g methanol to raise the temperature of 100.0 g water in a metal can from 28.00C to 58.0C. Calculate the heat of combustion of methanol in kJ/mol.
Answer:
the heat of combustion of the methanol is 402.31 kJ/mol
Explanation:
Given;
mass of water, [tex]m_w[/tex] = 100 g
initial temperature of water, t₁ = 28 ⁰C
final temperature of water, t₂ = 58 ⁰C
specific heat capacity of water = 4.184 J/g⁰C
reacting mass of the methanol, m = 1.00 g
molecular mass of methanol = 32.04 g/mol
number of moles = 1 / 32.04
= 0.0312 mol
Apply the principle of conservation of energy;
[tex]n\Delta H_{methanol} = Q_{water}\\\\n\Delta H_{methanol} = mc\Delta t\\\\n\Delta H_{methanol} = 100 \times 4.184\times (58-28)\\\\n\Delta H_{methanol} = 12,552 \ J\\\\n\Delta H_{methanol} = 12.552 \ kJ\\\\\Delta H_{methanol} = \frac{12.552}{n} \\\\H_{methanol} = \frac{12.552 \ kJ}{0.0312 \ mol} \\\\\Delta H_{methanol} = 402.31 \ kJ/mol[/tex]
Therefore, the heat of combustion of the methanol is 402.31 kJ/mol
what is the molarity of a solution prepared by dissolving 30.0g NaCl in enough water to make a 0.300 L solution?
A. 1.82 M NaCl
B. 0.154 M NaCl
C. 0.833 M NaCl
D. 1.71 M NaCl
Answer:
D.) 1.71 M NaCl
Explanation:
Molarity equation: M= n/v
n= moles of solute
v=liters of solution
NaCl= 58.443 g/mol
30g NaCl / 58.443g/mol = 0.5133(this is n)
0.5133 mols/0.300 L=1.71115674 M
A 0.5 g of naphthalene (C10H8) is burned in a bomb calorimeter containing 650g of water at an initial temperature of 20oC. After the reaction, the final temperature of the water is 26.4oC. The heat capacity of the calorimeter is 420 J/oC. Using these data, calculate the heat of combustion of naphthalene in kJ/mol.
Here, naphthalene is being burned in a water-filled bomb calorimeter.
What is Combustion?
Combustion is a chemical reaction between a fuel and an oxidizer in which heat, light, and other products of combustion are released. The most common type of combustion is the burning of hydrocarbon fuels, such as natural gas or gasoline, to produce carbon dioxide and water vapor as the main products.
Heat of combustion = [mass of water x specific heat capacity x (final temperature - initial temperature)] / (mass of naphthalene)
Heat of combustion = (650 g x 4.185 J/g∙°C x 6.4°C) / (0.5 g)
Heat of combustion = 16,914 J/g
Heat of combustion = 16,914 J/g x (1 mol/128 g)
Heat of combustion = 131.5 kJ/mol
Hence, the heat of combustion is 131.5 kJ/mol.
To know more about combustion,
https://brainly.com/question/10458605
#SPJ4
What is the total number of atoms present in 5Na,PO.?
Answer:
3.01×10²⁴ atoms
Explanation:
Our compound is the Na₃PO₄
Sodium phosphate.
We assume, we have 5 moles of the mentioned salt.
1 mol of anything contains 6.02×10²³ atoms.
That's the Avogadro's number. The conversion is:
5 mol . 6.02×10²³ atoms /1mol = 3.01×10²⁴ atoms
Describe the physical properties of matter using the graphic organizer below
indicate whether each property can be used to identify a substance, $6.6.864
Mass
Weights
Mass and Weight
Magnetism
Density
Physical properties such as mass, weights , density can be common for one or more substances hence cannot be used for identification while magnetism is unique for each substance ,hence used for identification.
What are physical properties?Any property which describes the state of a physical system is called as a physical property.Changes in physical properties are used to describe changes between the states. They are often related to as observable properties.
Physical property which can be quantified is a physical quantity. These are also classified further with respect to their directionality. Physical properties are differentiated from chemical properties by the way they determine how a substance behaves in a chemical reaction.
Learn more about physical properties,here:
https://brainly.com/question/18327661
#SPJ1
Which of the following molecules act as building blocks (monomers) of polypeptides?
A) 1, 4, and 6
B) 2, 7, and 8
C) 7, 8, and 13
D) 11, 12, and 13
E) 12, 13, and 15
B) 2, 7, and 8 of the following molecules act as building blocks (monomers) of polypeptides.
Are polypeptides' building components proteins?You may think of it as several flavors that come together to form lengthy chains that we refer to as polypeptides, which are the fundamental components of proteins.
What types of bonds do polypeptides contain?Peptide bonds bind the amino acids together in polypeptides. The interaction between the -carboxyl and -amino groups of two amino acids results in the formation of a dipeptide.
learn more about polypeptides
https://brainly.com/question/11136648
#SPJ4