In computing, a resident monitor is a type of system software program that was used in many early computers from the 1950s to 1970s. It can be considered a precursor to the operating system. The name is derived from a program which is always present in the computer's memory, thus being "resident".
Fill in the blanks to complete the function. The “identify_IP” function receives an “IP_address” as a string through the function’s parameters, then it should print a description of the IP address. Currently, the function should only support three IP addresses and return "unknown" for all other IPs.
This function should check the given IP address against a set of predetermined IP addresses. If it finds a match, it should print a description of the IP address. If it does not find a match, it should print "unknown".
Code snippet to functiondef identify_IP(IP_address):
if IP_address == "192.168.1.1":
print("This is a local IP address.")
elif IP_address == "8.8.8.8":
print("This is a public IP address.")
elif IP_address == "127.0.0.1":
print("This is a localhost IP address.")
else:
print("This is an unknown IP address.")
This function is designed to identify and provide a description for a given IP address. It will check the IP address against a predetermined list of IP addresses, and if it finds a match, it will print a description of the IP address. If no match is found, it will print "unknown".
This function can be useful for quickly identifying and understanding IP addresses.
Learn more about functions here:
https://brainly.com/question/11624077
#SPJ1
Which of these describes a slide transition?
Responses
a.) a way to edit the slide while you are presenting it
b.) a way to show two slides on the screen at the same time
c.) a way to have a new slide show up with a special effect
d.) a way to have objects in your slide appear at different times
Answer:
A way to have a new slide show up with a special effect.
Thus, the correct option for this question is C.
Explanation:
A slide transition is how one slide is removed from the screen and the next slide is displayed during a presentation.
Answer:
C. A way to have a new slide show up with a special effect.
Explanation:
A slide transition may be defined as the ocular consequence that significantly takes place when you migrate or move from one slide to the next during the time of presentation.
what are the key elements of transforming the core ?
Answer:v easy
Explanation:There are four key components of digital transformation you should take into account – digital customer, digital workspace, digital infrastructure and operations, and digital products and services
how much more impact that greeting card can have if visual elements like color,shapes,and lines were added to it?
The visual component that most strongly influences our emotions is color. To set the tone or ambience, we employ color. For instance, you might feel irritated looking at art that primarily features reds and oranges.
Why are the lines and shapes important in illustration?Form Shape is the artwork's actual physical shape.The basic goal of using line, shape, and form in a painting is to identify the subject matter and offer the necessary information. Artists are taught to visually arrange those components to make powerful compositions.
Therefore, the artist can utilize lines to outline shapes and direct the viewer's attention through the picture. Artists aim to draw the viewer's attention to the main point but also preventing it from becoming "fixed" there.
Read more about greeting card here:
https://brainly.com/question/30541293
#SPJ1
WRITE A PROGRAM IN QBASIC TO PRINT THE MULTIPLICATION TABLE FROM 1 TO 12.
1. When is it appropriate to yell at a user?
O A. After he or she screws up the second time.
O B. When he or she interrupts your troubleshooting.
C. It's never appropriate to yell at a user.
D. Anytime he or she ignores your guidance.
Word Processing Practice Test A
When inserting an image into a document, you can access the controls that let you scale the image's size in any direction by B. Click on the image.
The feature that would allow her to quickly and easily apply a set of formatting selections to her paper is D. Styles
How to explain the informationAfter you have inserted an image into your document, you can access the controls that let you scale the image's size in any direction by clicking on the image. This should select the image, and you will see a series of handles or anchor points appear around the image's perimeter.
You can then click and drag on these handles to resize the image in any direction. To maintain the image's aspect ratio while resizing, hold down the shift key while dragging one of the corner handles. Once you have resized the image to the desired size, you can release the mouse button to apply the changes. The exact steps to resize an image may vary depending on the software or application you are using.
Learn more about image on
https://brainly.com/question/15186403
#SPJ1
Complete questions
When inserting an image into a document, how do you access the controls that let you scale the image's size in any direction
Save the image.
Click on the image.
Select the text around the image.
Crop the image.
Kristin finished typing a five-paragraph research paper. She would like the paragraphs to look consistent throughout the document. Which feature would allow her to quickly and easily apply a set of formatting selections to her paper?
Character
Clip Art
Table
Styles
Display items ordered for customer #10449, its standard price, and total price for all items ordered. Use label for Total Price. (HINT: Total price is Sum(quantity*price). Also, don’t forget the GROUP BY statement.
Answer:
Assuming you have a database with tables orders, order_details, and products with the necessary columns, here's an SQL query that retrieves the items ordered for customer #10449, their standard price, and the total price for all items ordered:
SELECT
products.productName AS ItemOrdered,
order_details.pricePerUnit AS StandardPrice,
SUM(order_details.quantity * order_details.pricePerUnit) AS TotalPrice
FROM
orders
INNER JOIN order_details ON orders.orderID = order_details.orderID
INNER JOIN products ON order_details.productID = products.productID
WHERE
orders.customerID = '10449'
GROUP BY
products.productName,
order_details.pricePerUnit;
Explanation:
This query joins the orders, order_details, and products tables and filters the result to only include rows where the customerID is '10449'. It then groups the result by productName and pricePerUnit, and calculates the total price for each group using the SUM function.
The result will have three columns: ItemOrdered, StandardPrice, and TotalPrice, where ItemOrdered is the name of the product ordered, StandardPrice is the standard price for that product, and TotalPrice is the total price for all items of that product ordered by customer #10449. The TotalPrice column is labeled "Total Price" based on the instructions.
complete the function train val split that splits data into two smaller dataframes named train and validation. let train contain 80% of the data, and let validation contain the remaining 20% of the data. you should not be importing any additional libraries for this question
"Complete the function train_val_split that splits data into two smaller data frames named train and validation.
Let train contain 80% of the data, and let validation contain the remaining 20% of the data. You should not be importing any additional libraries for this question in 200 words", the following terms should be used:train_val_split, data, data frames, train, validation, and libraries.Here is an example code snippet in Python that fulfills the requirements stated in the question:```def train_val_split(data):train_len = int(len(data) * 0.8)train = data[:train_len]validation = data[train_len:]return train, validation```In the code above, the train_val_split function is defined. The input to this function is a parameter called data. The function then calculates the length of 80% of the data using the formula int(len(data) * 0.8). The int() function is used to convert the result of the multiplication to an integer.The train variable is assigned the first 80% of the data and the validation variable is assigned the remaining 20% of the data. Finally, the function returns the train and validation variables. This code snippet does not require any additional libraries to run.for more such question on Python
https://brainly.com/question/28675211
#SPJ11
all ik is that the answer is not a,b,c
so the choices are
1. Mystery
2. 4,8,3
or
3. 1
4, 8, 3 are the arguments of the given code
What are the arguments?Those are the values that are passed into the function and are represented as parameters.
According to the given Javascript code,
The first condition (a < b && b < c) is not true, as 8 is not less than 3.The second condition (b < a && a < c) is not true, as 8 is not less than 4.The third condition (c < a && c < b) is true, as 3 is less than both 4 and 8.If we look at what values are passed in where the function is called. In this case, it gets called in the purple block (console.log). 4, 8, 3 are the arguments of the given code and this is the answer to the given question
Read more about javascript here:
https://brainly.com/question/28021308
#SPJ1
The technology that supports the advancement of other trends in app development, such as enterprise apps and the use of wearable tech, is
_________. A Bluetooth headset is an example of
wearable technology
.
The technology that supports the advancement of other trends in app development, such as enterprise apps and the use of wearable tech, is mobile technology.
What is app development?
App development refers to the process of creating software applications for mobile devices such as smartphones and tablets, or for other platforms such as desktop computers and web browsers. It involves designing, coding, testing, and releasing an application for use by consumers or businesses. App development can range from simple applications like games or calculators to complex enterprise software that helps companies manage their operations.
The technology that supports the advancement of other trends in app development can refer to a wide range of tools, platforms, and frameworks that enable developers to create and deploy mobile applications. This includes programming languages, software development kits (SDKs), cloud computing services, and other technologies that help streamline the app development process. Wearable technology refers to devices that can be worn on the body, such as smartwatches, fitness trackers, and other similar gadgets that are designed to collect and transmit data. These devices are often used in conjunction with mobile apps to provide users with real-time feedback on their health, fitness, and other metrics. A Bluetooth headset is another example of wearable technology, as it allows users to wirelessly connect to their mobile devices and make calls or listen to music without having to hold their phones.
To know more technology visit:
https://brainly.com/question/13044551
#SPJ1
Consider the following client code and assume that it compiles correctly:
public class MyTesterClass
{
public static void main(String[] args)
{
MyClass myObject = new MyClass (12.4, 20);
int value1 = MyClass.SOME_VALUE;
int value2 = myObject.method1();
int value3 = MyClass.method2(20);
}
}
Which of the following is a class method?
a.method1
b.method2
c.MyClass
d.SOME_VALUE
e.This cannot be determined by examining the above code
The class method in the given code is "b.method2" because it is called using the class name "MyClass" and not an instance of the class. In Java, we refer to class methods by using the class name followed by a dot and the method name.
In Java, a class method is a method that belongs to the class rather than to an instance of the class. It can be called using the class name followed by a dot and the method name. In the given code, option b.method2 is a class method because it is called using the class name "MyClass". Option a.method1 is an instance method because it is called using an instance of the class "myObject". Option c refers to the name of the class and option d refers to a static final variable.
The class method in the given code is "b.method2" because it is called using the class name "MyClass" and not an instance of the class. In Java, we refer to class methods by using the class name followed by a dot and the method name.
The other options are as follows:
a. "a.method1" is an instance method because it is called using an instance of the class "myObject".
c. "c.MyClass" is the name of the class and not a method.
d. "d.SOME_VALUE" is a static final variable and not a method.
Visit to know more about code:-
https://brainly.com/question/26134656
#SPJ11
the differencebetween browser and search engine
please my assignment have50 mark
Answer:
A browser is a piece of software that retrieves and displays web pages; a search engine is a website that helps people find web pages from other websites.
A company's legal and accounting teams have decided it would be more cost-effective to offload the risks of data storage to a third party. The IT management team has decided to implement a cloud model and has asked the security team for recommendations. Which of the following will allow all data to be kept on the third-party network?
A. VDI
B. SaaS
C. CASB
D. FaaS
The answer is (B) SaaS. SaaS (Software-as-a-Service) is a cloud computing model where the software application is hosted by a third-party provider, and users can access the application through the internet.
All the data is stored on the provider's network, and users can access it as needed. This model allows the company to offload the risks of data storage to the third-party provider, while still being able to access the data when needed.
VDI (Virtual Desktop Infrastructure) is a model where the desktop environment is hosted on a remote server, and users can access the desktop through the internet. However, the data is stored on the user's device, not on the provider's network.
CASB (Cloud Access Security Broker) is a security tool that provides visibility and control over cloud services. It does not store data on its own network.
FaaS (Function-as-a-Service) is a cloud computing model where the provider manages the infrastructure needed to execute a specific function or piece of code. It does not provide data storage capabilities.
To know more about SaaS click here:
brainly.com/question/24233315
#SPJ4
The ABC Company requires a network that can support 50 users. Describe the correct type
of networking model to use and explain why.
Answer:
Client-server model
Explanation:
The correct type of networking model to use for the ABC Company would be a client-server model. This model involves a centralized server that provides services and resources to multiple client devices such as computers, laptops, tablets, and smartphones. The clients connect to the server to access shared resources such as files, printers, and applications.
The client-server model is ideal for the ABC Company because it can handle a large number of users without compromising on performance, scalability, and security. The server can be designed to accommodate future growth by adding new hardware or software as needed. This model also ensures that data and resources are managed and stored in a central location, making it easier to backup, monitor, and manage.
Furthermore, the client-server model provides robust user authentication and access control mechanisms that protect sensitive data and prevent unauthorized users from accessing the network. This is critical for the ABC Company as it ensures data privacy, confidentiality, and integrity.
In conclusion, the client-server model is the best choice for the ABC Company as it offers scalability, security, efficient resource management, and streamlined data access control.
Assembly code
Read two names. Each is 3 bytes long. If both names are identical, print IDENTICAL, otherwise type DIFFERENT
Sample input
ABC
EFG
Output
DIFFERENT
Sample input
LOY
LOY
Output
Identical
Helpful Code
;nasm 2.13.02
section .data
message: db 'Identical',10
messageLen: equ $-message
message2: db 'BL is less than AL',10
messageLen2: equ $-message2
section .bss
val1: resb 2
val2: resb 2
section .text
global _start
_start:
mov eax,3
mov ebx,0
mov ecx,val1
mov edx,2
int 80h
mov eax,3
mov ebx,0
mov ecx,val2
mov edx,2
int 80h
mov al,[val1]
mov bl,[val2]
cmp al,bl
jnz end
mov al,[val1+1]
mov bl,[val2+1]
cmp al,bl
jnz end
mov eax,4
mov ebx,1
mov ecx,message
mov edx,messageLen
int 80h
end:
mov eax,1
mov ebx,0
int 80h;
This Assembly code reads two names of 3 bytes each and compares them to determine if they are identical or different. Here is an explanation of the code:
;nasm 2.13.02
section .data
message: db 'Identical',10
messageLen: equ $-message
message2: db 'DIFFERENT',10
messageLen2: equ $-message2
section .bss
val1: resb 3
val2: resb 3
section .text
global _start
_start:
; Read the first name
mov eax,3
mov ebx,0
mov ecx,val1
mov edx,3
int 80h
; Read the second name
mov eax,3
mov ebx,0
mov ecx,val2
mov edx,3
int 80h
; Compare the names
mov al,[val1]
mov bl,[val2]
cmp al,bl
jnz different
mov al,[val1+1]
mov bl,[val2+1]
cmp al,bl
jnz different
mov al,[val1+2]
mov bl,[val2+2]
cmp al,bl
jnz different
; If the names are identical, print "Identical"
mov eax,4
mov ebx,1
mov ecx,message
mov edx,messageLen
int 80h
jmp end
different:
; If the names are different, print "Different"
mov eax,4
mov ebx,1
mov ecx,message2
mov edx,messageLen2
int 80h
end:
; Exit the program
mov eax,1
mov ebx,0
int 80h
The program first defines the two messages that will be printed: "Identical" and "DIFFERENT". It then defines two buffers to hold the two names, val1 and val2.
In the main program, the first name is read into val1 using the read system call. The second name is read into val2 in the same way.
The names are then compared byte-by-byte using cmp instructions. If any two corresponding bytes are not equal, the program jumps to the label different, which prints "DIFFERENT" using the second message.
If the names are identical, the program continues to the mov instruction that loads the first message into the ecx register, followed by the int 80h instruction that prints the message using the write system call.
The program then jumps to the end label, which exits the program using the exit system call.
Learn more about Assembly code at:
https://brainly.com/question/30462375
#SPJ1
The thing about this is nun of it makes sense to me
Anyone can help?
Answer:
To determine if a user was near a particular public event
Explanation:
Because the metadata is for the "location" the app was used you look for the answer which pertains to the location of the user. Also, the app is formulated around the user's interests, age, etc. So location would be pointless unless trying to figure out their interests with said location, such as buying preference.
A and B are all invalid because they are pointless.
A) You do not need location for determining if they are interested in sports unless they are at a particular event for sports , hence D
B) You would not be able to determine if the user likes cable TV with the metadata.
So it is either between C or D.
Now which is the most relevant pertaining to the mission of the app?
Well one of them are just stalkerish and the other is the only acceptable and appropriate one.
Assembly code
Read 2 numbers. Each is 1 byte. Each is between 0 and 9. If number 1 is less than numer 2, print number 1 is less than number 2. If number 2 is less than number 1, then print number 2 is less than number one. Otherwise, print "they are equal"
Sample input
12
output
first number is less than second number
Sample input
21
Output
first number is greater than second number
Sample input
22
Output
They are equal
Below is an example of assembly code that reads two numbers and compares them according to the given conditions:
perl
section .data
prompt db 'Enter two numbers between 0 and 9: ', 0
format db '%c', 0
less1 db 'first number is less than second number', 0
less2 db 'second number is less than first number', 0
equal db 'they are equal', 0
section .bss
num1 resb 1
num2 resb 1
section .text
global _start
_start:
; display prompt and read first number
mov eax, 4
mov ebx, 1
mov ecx, prompt
mov edx, 35
int 0x80
mov eax, 3
mov ebx, 0
mov ecx, num1
mov edx, 1
int 0x80
; read second number
mov eax, 4
mov ebx, 1
mov ecx, prompt
mov edx, 35
int 0x80
mov eax, 3
mov ebx, 0
mov ecx, num2
mov edx, 1
int 0x80
; compare numbers
mov al, [num1]
cmp al, [num2]
je equal_numbers
jb first_less_than_second
jmp second_less_than_first
equal_numbers:
; print "they are equal"
mov eax, 4
mov ebx, 1
mov ecx, equal
mov edx, 13
int 0x80
jmp exit_program
first_less_than_second:
; print "first number is less than second number"
mov eax, 4
mov ebx, 1
mov ecx, less1
mov edx, 31
int 0x80
jmp exit_program
second_less_than_first:
; print "second number is less than first number"
mov eax, 4
mov ebx, 1
mov ecx, less2
mov edx, 31
int 0x80
exit_program:
; exit program
mov eax, 1
xor ebx, ebx
int 0x80
What is the Assembly code about?The code uses system calls to display prompts, read input, and print output.
Therefore, The cmp instruction is used to compare the two numbers, and then the program jumps to the appropriate section of code based on the result of the comparison. Finally, the program exits using a system call.
Read more about Assembly code here:
https://brainly.com/question/13171889
#SPJ1
Please help asapppppp
Answer:
It is a ring topology.
Explanation:
In these networks if one computer goes down then all of the other computers are affected. This network takes the shape of ring where all of the computers are connected together.
The following code causes an infinite loop. Can you figure out what’s incorrect and how to fix it?
def count_to_ten():
# Loop through the numbers from first to last
x = 1
while x <= 10:
print(x)
x = 1
A. should use a for loop instead of a while loop
B. The X variable is initialized using the wrong value
C. Variable X is assigned the value 1 in every loop
D. Needs to have parameters passed to the function
Answer: The issue with the code is that the variable x is assigned the value of 1 in every loop, which means the condition x <= 10 will always be true, causing an infinite loop. To fix the issue, the variable x should be incremented in each loop, not set back to 1. Here's the corrected code:
def count_to_ten():
# Loop through the numbers from first to last
x = 1
while x <= 10:
print(x)
x += 1
Explanation: Option C correctly identifies the issue and the corrected code fixes it by incrementing x by 1 in each loop. Therefore, the correct answer is C.
Pls help me solve.
Enter a number: 50
Enter a number: 11
Enter a number: 66
Enter a number: 23
Enter a number: 53
Sum: 203
Numbers Entered: 5
Answer:
Here's an example program in Python that should accomplish the task you described:
```
sum = 0
count = 0
while True:
num = input("Enter a number: ")
if num == "":
break
sum += float(num)
count += 1
if sum > 200:
print("Sum:", sum)
print("Numbers Entered:", count)
break
```
This program initializes two variables `sum` and `count` to zero. It then enters an infinite loop that repeatedly asks the user to input a number. The program checks if the input is an empty string, indicating that the user has finished entering numbers, and breaks out of the loop if so.
Otherwise, the program adds the input number to the sum variable, increments the count variable, and checks if the sum is greater than 200. If it is, the program prints out the sum and count, and breaks out of the loop.
Note that this program assumes that the user will only input numbers, and not any other characters. If the user inputs invalid data, the program will raise an error.
List each customer who has bought tents and the number of units bought by each customer, including customer ID, customer name, and units bought (label of calculation). Units bought is sum(quantity). (HINT: this has multiple tables so make sure to include the JOIN statement
The SQL query that list each customer who has bought tents is added below
Writing the SQL statementThe query to achieve the desired result, since that there is a "customers" table, a "products" table, and a "sales" table that links the two together:
SELECT c.customer_id, c.customer_name, SUM(s.quantity) AS units_bought
FROM customers c
JOIN sales s ON c.customer_id = s.customer_id
JOIN products p ON s.product_id = p.product_id
WHERE p.product_name = 'tents'
GROUP BY c.customer_id, c.customer_name;
This query joins the "customers" table with the "sales" table using the "customer_id" column, and then joins the "sales" table with the "products" table using the "product_id" column.
The WHERE clause filters the results to only include sales of tents. Finally, the SUM() function is used to calculate the total number of tents bought by each customer, and the GROUP BY clause groups the results by customer ID and name.
Read more about SQL statement at
https://brainly.com/question/30078874
#SPJ1
in the shop class, complete the function definition for setnumemployees() that takes in the integer parameter newnumemployees. ex: if the input is 232 42 9, then the output is: items in stock: 232 years open: 42 number of employees: 9
The function setnumemployees() in the shop class is responsible for setting the number of employees in the shop object.
It takes an integer parameter newnumemployees, which represents the new number of employees to be set for the shop object.
The function simply sets the value of the private member variable numemployees to the value of the parameter newnumemployees.
In the given example, if the input is "232 42 9", the function call will set the number of employees of the shop to 9. The function does not return any value, but it modifies the state of the shop object by updating the value of its numemployees member variable.
Overall, this function allows for the number of employees of a shop object to be easily updated and modified as needed.
To know more about function click here:
brainly.com/question/29911729
#SPJ4
BONUS QUESTION WORTH 100!!
no links please and no copying and pasting .I will report you and you will be given a warning.
only answer if you know this please!.
Your Assignment, Part I
You decide that you want to open a flower shop. You want to sell premade arrangements, custom arrangements, bouquets containing either one or two types of flowers, and individual flowers.
Before you can open a shop though, you need to make sure your personal finances are in order. You can use spreadsheets in order to do this.
Submit any spreadsheets you create to your instructor at the end of this project.
1. Imagine you have $15,000 saved in a personal account to help supplement your income during the first year your business is open. Per month, the rent on your current apartment is $500, utilities are generally about $45, gas for your car is about $120, and food costs are about $350. In September, you know your rent will increase to $525 per month. Create a budget that divides the $15,000 across these categories for a full year. If there is any extra money, include that in your budget.
2. With your personal finances taken care of, you feel prepared to open your flower shop. You secure a small business loan for $60,000. You want to spend $30,000 of that loan renovating the space for your shop and $15,000 on equipment needed to store the flowers and create arrangements. Rent will be $700 per month or $4,200 for the first six months the shop is open and utilities will be approximately $76 per month or $456 for the first six months. You also want to spend $2,000 on flowers and supplies to stock the shop for the first month and $600 per month for the next five months to restock flowers and greenery.
a) Create a budget for the shop’s opening with this information.
b) Looking at these numbers in the spreadsheet starts to get a little overwhelming. You want to be able to look quickly at a chart and have a good idea of how much of your loan will be used in the first month of opening the business. What type of graph or chart would work best for this?
c) Create the graph or chart that will best show how you spent your loan in the first month of opening the business.
3. The shop has been open for a week now and you need to work on the first payroll for your two employees, Sean and Justine. Sean’s hourly pay is $8.25. He worked 10 hours this week and is taxed at a 5% rate. Justine’s hourly pay is $9.00. She worked 30 hours this week and is taxed at a 6% rate.
a) Create a spreadsheet for your payroll. Make sure you use a formula to automatically calculate Total Pay.
b) Did you use conditional formatting on any of the cells? If so, which ones? Explain why.
4. After working on payroll, you decide to take inventory of what’s in the shop because your next order date is coming up soon. You will just focus on your inventory of flowers.
a) Use the following information to create your inventory record:
254 red roses currently; 48 sold this week
102 yellow roses currently; 12 sold this week
40 pink hydrangeas currently; 3 sold this week
164 white daisies currently; 52 sold this week
132 yellow daisies currently; 48 sold this week
144 orange daisies currently; 18 sold this week
86 pink lilies currently; 4 sold this week
102 white peonies currently; 24 sold this week
98 pink peonies currently; 36 sold this week
b) If your current rate of sales continues, in how many weeks will you run out of pink peonies and red roses, assuming that all flowers remain fresh? Use your spreadsheet to calculate the answer.
5. Kimberly Melville comes in wanting to order a personalized flower arrangement. She wants an arrangement with 10 white daisies, 4 white peonies, and 2 pink lilies. White daises are $1 each, white peonies are $2.75 each, and pink lilies are $4 each. Kimberly also chooses a vase that costs $14.00. Each of these items is taxable, and the tax rate is 7.5%. You write down her address as 300 Starlight Court, Baltimore MD, 21228. Create an invoice for this order.
6. Three months after the shop first opens, you want to create an up-to-date balance sheet to see how the company is doing financially in its first quarter (January through March). Use the information below to create your balance sheet.
Your current assets include:
$3,546 for Accounts Receivable (from invoices)
$15,000 for Equipment
$3,200 for Inventories
$678 for Cash
Your current liabilities include:
$3,200 for Accounts Payable
$4,200 for Wages
$300 for Taxes Payable
Total expenses for the year: $12,280
The Budget PlanBased on the information provided, here's a budget plan that divides the $15,000 across the categories mentioned:
Rent:
$500 x 8 months = $4,000
$525 x 4 months = $2,100
Total rent expenses = $6,100
Utilities:
$45 x 12 months = $540
Gas:
$120 x 12 months = $1,440
Food:
$350 x 12 months = $4,200
Total expenses for the year: $12,280
With $15,000 in savings, this leaves $2,720 for unexpected expenses, emergencies, or any other miscellaneous costs that may arise throughout the year.
It's always a good idea to have some extra funds available in case of unforeseen circumstances, so this budget plan provides a cushion for those situations.
Read more about budgets here:
https://brainly.com/question/6663636
#SPJ1
(Difficult) Introducing a New Programming Language:
Two Computer Science students, Drew and Jane, decided to create their own basic programming language which they called Drane (Drew + Jane). The following is a small subset of the statements available in the Drane programming language:
---------------------------------------------------------------------------------------------------
Statement--- Explanation
b = expression---
The result of the expression is assigned to variable b.
a + b, a - b, a * b, a / b---
+ = addition, - = subtraction, * = multiplication, / = division
WHEN [ condition ]
{
instructions1
}
OTHERWISE
{
instructions2
}---
This is a conditional statement. When the condition is true,
the statements represented by instructions1 are executed.
Otherwise the statements represented by instructions2 in the OTHERWISE block are executed.
Note: The WHEN statement can be used without the OTHERWISE clause.
LOOP [ n ]
{
instructions
}---
Loops n number of times and executes the instructions each time
---------------------------------------------------------------------------------------------------
You have been asked to code the following algorithm using the Drane programming language:
"You have been given two integers 'start' and 'stop' (both inclusive) and display the result. For example, if given the numbers 2 & 5, then the algorithm should display 14 (which is 2 + 3 + 4 + 5).
Which of the following would successfully code this algorithm in the Drane programming language?
A. sum = 0
num = start
LOOP [ stop ]
{
num = num + 1
sum = sum + num
}
SHOW [ sum ]
B. sum = 0
num = start
LOOP [ stop - start ]
{
sum = sum + num
num = num + 1
}
SHOW [ sum ]
C. sum = start
num = start + 1
LOOP [ stop - start ]
{
WHEN [ num < stop ]
{
sum = sum + num
num = num + 1
}
}
SHOW [ sum ]
D. sum = 0
num = start
LOOP [ stop - start + 1 ]
{
sum = sum + num
num = num + 1
}
SHOW [ sum ]
To code the given algorithm in the Drane programming language, the correct option is B. `sum = 0 num = start LOOP [ stop - start ]{sum = sum + numnum = num + 1}SHOW [ sum ]`
In the algorithm, two integers 'start' and 'stop' are provided, where 'start' and 'stop' are inclusive. The result is obtained by adding these integers with the numbers in between them.Code the given algorithm in the Drane programming language:1: Set sum and num to 0 and start respectively2: In a loop, loop through the range (stop - start) and add the value of num to the sum at each iteration. Increment the value of num by 1. The loop will execute until it has looped through the number of times equivalent to the difference between the stop and start value. `sum = 0 num = start LOOP [ stop - start ]{sum = sum + numnum = num + 1}`3: Output the final value of sum. `SHOW [ sum ]`Therefore, the correct option is B. `sum = 0 num = start LOOP [ stop - start ]{sum = sum + numnum = num + 1}SHOW [ sum ]` successfully code this algorithm in the Drane programming language.Learn more about algorithm: https://brainly.com/question/13902805
#SPJ11
lab goal : this lab was designed to teach you how to instantiate an object, pass parameters, utilize loops, selection, and store results in a string. lab description : create methods that use a loop to add a dash ( - ) between each letter in a word. sample data: purple jellyfish dumpling sample output : void method :: dashed word: p-u-r-p-l-e return method :: dashed word: p-u-r-p-l-e void method :: dashed word: j-e-l-l-y-f-i-s-h return method :: dashed word: j-e-l-l-y-f-i-s-h void method :: dashed word: d-u-m-p-l-i-n-g return method :: dashed word: d-u-m-p-l-i-n-g dashed word lab value - 100
In the Dashed Word Lab, the goal is to help you learn object instantiation, passing parameters, using loops, making selections, and storing results in strings. In this lab, you'll create methods that use a loop to insert a dash (-) between each letter of a word.
For example, if the input word is "purple", the output should be "p-u-r-p-l-e". You'll create both void and return methods for this task. The void method prints the dashed word directly, while the return method returns the dashed word as a string. Sample data includes words like "purple", "jellyfish", and "dumpling". The expected output for these words is:
void method :: dashed word: p-u-r-p-l-e
return method :: dashed word: p-u-r-p-l-e
void method :: dashed word: j-e-l-l-y-f-i-s-h
return method :: dashed word: j-e-l-l-y-f-i-s-h
void method :: dashed word: d-u-m-p-l-i-n-g
return method :: dashed word: d-u-m-p-l-i-n-g
This lab provides valuable practice in working with loops, parameter passing, and string manipulation, while also reinforcing your understanding of object instantiation and method creation. The lab is worth 100 points.
for more such question on parameters
https://brainly.com/question/29673432
#SPJ11
what is touch pad ? computer of class:6
On laptops a touchpad or trackpad is a pointing device featuring a tactile sensor, a specialized surface that can translate the motion and position of a user's fingers to a relative position on the operating system that is made output to the screen
Answer:
A touchpad, also known as a trackpad, is an input device commonly found on laptops and some desktop computer keyboards. It is a rectangular or square pad usually located below the keyboard or in front of it. The touchpad allows the user to control the cursor or pointer on the screen by moving their finger or fingers across its surface.
The touchpad has a sensor that detects the movement of the user's finger and translates it into movement on the screen. It also typically includes one or more buttons that can be used to perform actions such as selecting, dragging, or scrolling.
Many touchpads support multi-touch gestures, allowing the user to perform more complex actions by using two or more fingers simultaneously, such as pinch-to-zoom, swiping, or rotating. Touchpads have largely replaced the traditional trackball and pointing stick as the primary means of cursor control on laptops and other portable computing devices.
if the relationship between AGENT and CUSTOMER were implemented in a hierarchical model, what would hierarchical structure look like?
If the relationship between AGENT and CUSTOMER were implemented in a hierarchical model, the hierarchical structure could look like the following:
Level 1: Company or Organization
At the top level of the hierarchy would be the company or organization that the AGENT represents. This could be a financial services firm, insurance company, or any other type of organization that provides products or services to customers.
Level 2: Department or Business Unit
At the second level of the hierarchy would be the department or business unit within the organization that the AGENT is a part of. This could include the sales department, customer service department, or any other department that interacts directly with customers.
Level 3: AGENT
At the third level of the hierarchy would be the AGENT who interacts directly with the CUSTOMER. This could be a sales representative, account manager, or any other type of agent who is responsible for managing the relationship with the customer.
Level 4: CUSTOMER
At the bottom level of the hierarchy would be the CUSTOMER who interacts with the AGENT. Each AGENT would be responsible for managing a group of customers, and each customer would be assigned to a specific AGENT.
The hierarchical model would be useful for organizing and managing large numbers of customers within an organization, allowing for clear lines of communication and accountability at each level of the hierarchy. However, it is important to note that not all relationships between AGENT and CUSTOMER may fit into a hierarchical model, and other types of organizational structures may be more appropriate in certain situations.
Given the code, what are the arguments of the function?
Answer choices
1. Mystery
2. 1
3. 4,8,3
4. a,b,c
Answer:
3. 4, 8, 3
Explanation:
The arguments are values. They are passed to the function and represented as parameters inside the function.
Parameters: a, b, c
Arguments: 4, 8, 3
a = 4
b = 8
c = 3
which of the following can not be used as an argument to the collect method of the stream class. group of answer choices collectors.joining() collectors.toarray() collectors.tolist() collectors.toset()
Out of the given options, collectors.to array() cannot be used as an argument to the collect method of the stream class.
The collectors. to array () is an argument that cannot be used with the collection method of the Stream class. The collection method of the Stream class collects all of the elements in the stream into a specified collection or data structure. It returns the result of the final accumulation operation of the stream pipeline. The Collectors class, on the other hand, provides several predefined reduction operations that can be used with the collect method. The predefined operations can be used to collect data into different types of collections, like Lists, Sets, or Maps. The collectors. joining() argument returns a Collector that concatenates the input elements into a single string, with optional delimiters, prefixes, and suffixes. The collectors. to list () argument returns a Collector that accumulates the input elements into a new List. The collectors. to set () argument returns a Collector that accumulates the input elements into a new Set. Therefore, the collectors. array () argument is not a valid argument for the collect method.
learn more about array here:
https://brainly.com/question/30757831
#SPJ11