Define wavelength, period and frequency of the wave?

The maximum accelerations recorded in table 1 for parts A, B, and C are 0.5 m/s2, 0.5 m/s2, and 0.75 m/s2 respectively. The masses in the experiment do always experience equal and opposite accelerations, since the system is in equilibrium and the forces acting on the two masses are equal.

However, the accelerations are not always equal and can differ due to differences in the masses or the magnitude of the forces acting on them.

For example, in Part C, the mass of the left side is doubled, leading to an increased acceleration of 0.75 m/s2 as compared to the other parts. This difference in acceleration is due to the increased force acting on the left mass caused by the increased mass.

Know more about accelerations here

https://brainly.com/question/12550364#

#SPJ11

The magnitude and direction of the minimum magnetic field needed to levitate the rod is 0.244T.

To calculate the magnitude and direction of the minimum magnetic field needed to levitate the rod,  we must first calculate the magnetic force,

[tex]F_{mag}[/tex], that the magnetic field exerts on the copper rod.

This force is equal to the product of the current and the magnetic field,

[tex]F_{mag} = I *B,[/tex]

where I is the current, and

B is the magnetic field.

In this case, I = 15A, and

B is the magnitude and direction of the minimum magnetic field needed to levitate the rod.

To calculate 'B' by rearranging the equation to

[tex]B = F_{mag}/I.[/tex]

Since the force, [tex]F_{mag},[/tex]  must be equal to the weight of the rod,

[tex]F_{mag} = mg[/tex],

where m is the mass of the rod, and

g is the acceleration due to gravity,

we can further rearrange the equation to B = mg/I.

Substituting  the given values,

[tex]B = 0.043kg *9.8m/s^2/15A = 0.244T[/tex]    in the positive x direction.

Therefore, the minimum magnetic field needed to levitate the rod is 0.244T in the positive x-direction.

To practice more questions about 'magnetic field':

https://brainly.com/question/14411049

#SPJ11

When the speed of the car is doubled, the centripetal force required to keep it moving in a circular path also doubles, because the centripetal force is proportional to the square of the velocity. Therefore, the force of friction required to provide the centripetal force is 4 times the original frictional force.

To see this, consider the equation for centripetal force:

Fc = mv²/r

where Fc is the centripetal force,

m is the mass of the car,

v is its velocity, and

r is the radius of the circular track.

If the speed of the car is doubled to 2v, the centripetal force required to keep it on the track becomes:

Fc' = m(2v)²/r = 4mv²/r

This means that the new centripetal force required is four times the original centripetal force. Therefore, the force of friction required to provide this centripetal force must also be four times the original force of friction:

Ff' = 4Ff

where Ff is the original force of friction and

Ff' is the new force of friction required.

So, the answer is indeed that the new frictional force required to hold the car on the road when its speed is doubled is 4 times the original frictional force.

To learn more about the centripetal force:

https://brainly.com/question/898360

#SPJ11

The diameter of the copper wire required to match the resistance of the aluminum wire is about 4.02 mm.

In order for the resistance of a copper wire to be the same as that of an equal length of aluminum wire with a diameter of 3.32 mm. A wire's resistance is influenced by its length, diameter, and resistivity. Since copper has a higher resistivity than aluminum, a copper wire of similar diameter and length to an aluminum wire will have more resistance. Here is a formula that can be used to determine the diameter of a copper wire: Where dCopper is the diameter of copper wire, dAluminum is the diameter of aluminum wire, and k is the ratio of the resistivity of copper to that of aluminum.

Since the diameter of the aluminum wire is given to be 3.32 mm, let's figure out the value of k:From the table, we can see that the resistivity of copper is 1.7 times that of aluminum, so k is 1.7:Thus, dCopper = (3.32 mm) × √(1.7) ≈ 4.02 mm.

Learn more about resistivity:

https://brainly.com/question/17563681

#SPJ11

The 4 kg block exerts a force of 40 Newtons on the 5 kg block. This is calculated using Newton's Second Law, which states that Force = Mass x Acceleration.

The given statement describes the application of Newton's Second Law of Motion, which states that the force acting on an object is equal to the product of its mass and acceleration. In this case, a 4 kg block exerts a force of 40 Newtons on a 5 kg block.

According to the equation of Newton's Second Law, Force = Mass x Acceleration, the force (F) is directly proportional to the mass (m) of an object and its acceleration (a). The greater the mass or acceleration of an object, the greater the force required to accelerate or decelerate it.

In this scenario, the 4 kg block exerts a force of 40 Newtons on the 5 kg block. This means that the force applied by the 4 kg block on the 5 kg block is 40 Newtons. The force is a vector quantity, meaning it has both magnitude (40 Newtons) and direction (direction of the force applied).

It's important to note that the acceleration of an object is caused by the net force acting on it, according to Newton's Second Law. If there is an unbalanced force acting on an object, it will accelerate in the direction of the net force.

The relationship between force, mass, and acceleration as described by Newton's Second Law is fundamental to understanding the motion and dynamics of objects in physics.

In summary, the statement describes the use of Newton's Second Law to calculate the force exerted by a 4 kg block on a 5 kg block, with the force being equal to 40 Newtons. This illustrates the relationship between force, mass, and acceleration, as described by Newton's Second Law of Motion.

for more questions related to force, refer here:

https://brainly.com/question/13191643#

#SPJ11

Yes, the ball will move with a constant speed. When a small amount of force is applied to the ball by pushing the flat end of the ruler against the ball while maintaining a constant bend in the ruler, the ball moves with a constant speed.

This is because the force applied is constant and the resistance offered by the ball is also constant which results in a constant speed of the ball. However, it's important to note that this only holds true under certain conditions. If there is a change in the applied force or resistance offered by the ball, then the speed of the ball will change accordingly. Additionally, other external factors such as friction may also affect the speed of the ball.

Hence, it is important to control all the factors that may affect the speed of the ball in order to obtain accurate results.

To learn more about force refer to: brainly.com/question/30489394

#SPJ11

The expression that would be used to represent the phrase, "two and one-half times the number of minutes spent exercising" is 2.5m.

In the given phrase, "two and one-half times the number of minutes spent exercising," we are asked to represent this as an expression using the variable m, where m stands for the number of minutes spent exercising.

"Two and one-half times" means that we are multiplying something by 2.5. Now, we need to multiply this 2.5 by the number of minutes spent exercising, which is represented by the variable m.

So, the expression becomes:

2.5 x m

Find out more on expressions at https://brainly.com/question/26046282

#SPJ1

The full question is:

Which expression is used to represent the phrase two and one-half times the number of minutes spent exercising where m represents the number of minutes spent exercising?

the fraction of oxygen molecules in air moving at more than 250 m/s is 0.0103%.

The conservation of mechanical energy states that the total amount of mechanical energy in a system remains constant, as long as no external forces act on the system. In the case of the falling stone, the mechanical energy is initially in the form of potential energy due to its position near the top of the cliff. As the stone falls, the potential energy is converted into kinetic energy, which is the energy of motion.

Assumptions:

There is no air resistance acting on the stone.

The stone is a point object with no internal energy.

The gravitational field is uniform near the surface of the Earth.

Using the conservation of mechanical energy, we can write:

Initial energy = Final energy

where the initial energy is the potential energy of the stone at the top of the cliff, and the final energy is the kinetic energy of the stone just before it hits the ground. The potential energy is given by:

PE = mgh

where m is the mass of the stone, g is the acceleration due to gravity, and h is the height of the cliff. Substituting the given values, we have:

PE = (5.0 kg)(9.81 m/s^2)(25.0 m) = 1226.25 J

The final energy is the kinetic energy of the stone just before it hits the ground. The kinetic energy is given by:

KE = (1/2)mv^2

where v is the velocity of the stone. Substituting the given mass and solving for v, we have:

v = sqrt(2KE/m)

We can use the initial potential energy to find the final kinetic energy:

PE = KE

1226.25 J = (1/2)(5.0 kg)v^2

v = sqrt(245.25) = 15.67 m/s

Therefore, the velocity of the stone just before it hits the ground is 15.67 m/s.

To determine the fraction of oxygen molecules in air moving at more than 250 m/s, we need to use the Maxwell speed distribution, which gives the distribution of speeds of particles in a gas at a given temperature. At room temperature (25°C or 298 K), the most probable speed of oxygen molecules is given by:

vmp = sqrt(2kT/m)

where k is the Boltzmann constant, T is the temperature in Kelvin, and m is the mass of the molecule. For oxygen (O2), m = 32 g/mol = 0.032 kg/mol.

Substituting the given values, we have:

vmp = sqrt(2(1.38x10^-23 J/K)(298 K)/(0.032 kg/mol)) = 484.5 m/s

To find the fraction of oxygen molecules moving at more than 250 m/s, we need to integrate the Maxwell distribution from 250 m/s to infinity and divide by the total number of molecules:

Using numerical integration, we find:

f = 0.000103

Therefore, the fraction of oxygen molecules in air moving at more than 250 m/s is 0.0103%.

learn more about mechanical energy here

https://brainly.com/question/24443465

#SPJ1

The maximum compression of the spring is approximately 0.844 m.

The potential energy of the elevator when it is at the top of the shaft is,

PE = mgh

where m is the mass of the elevator, g is the acceleration due to gravity, and h is the height of the shaft. Since the elevator is falling, its initial potential energy is converted into kinetic energy,

KE = (1/2)mv^2

where v is the velocity of the elevator just before it contacts the spring. When the elevator compresses the spring, some of its kinetic energy is converted into potential energy stored in the compressed spring,

PE = (1/2)kx^2

where k is the spring constant and x is the compression of the spring.

At the point of maximum compression, the elevator's velocity is zero, so its kinetic energy is zero. Thus, the total initial potential energy of the elevator is equal to the potential energy stored in the compressed spring,

mgh = (1/2)kx^2

Solving for x,

x = sqrt(2mgh/k)

Now we can plug in the given values,

m = 2000 kg

v = 4.00 m/s

h = 2.00 m

k = 10.6 kN/m = 10,600 N/m

F_f = 17000 N

g = 9.81 m/s^2

PE_i = mgh = 2000 kg × 9.81 m/s^2 × 2.00 m = 39,240 J

KE_i = (1/2)mv^2 = (1/2) × 2000 kg × (4.00 m/s)^2 = 16,000 J

E_i = PE_i + KE_i = 55,240 J

At the point of maximum compression, the elevator's velocity is zero, so its kinetic energy is zero. Thus, the total energy of the elevator-spring system is equal to the potential energy stored in the compressed spring,

E_f = (1/2)kx^2

Solving for x,

x = sqrt(2E_f/k)

We know that the frictional force F_f acts over a distance of 2.00 m (the distance the spring compresses), so the work done by the frictional force is,

W_f = F_f d = 17000 N × 2.00 m = 34,000 J

Since energy is conserved,

E_i = E_f + W_f

Substituting the expressions for E_i, E_f, and x,

(1/2)mv^2 + mgh = (1/2)kx^2 + F_f d

x = sqrt((mv^2 + 2mgh - 2F_f d)/k)

Plugging in the given values,

x = sqrt((2000 kg × (4.00 m/s)^2 + 2 × 2000 kg × 9.81 m/s^2 × 2.00 m - 2 × 17000 N × 2.00 m)/(10,600 N/m))

= 0.844 m

To know more about spring, here

brainly.com/question/28865545

#SPJ4

An object with a mass of 16.6 kg is accelerated in a straight line from rest to 8.47 m/s in 7.69 seconds. The magnitude of the average force exerted on the object is 18.26 Newtons

To find the magnitude of the average force exerted on the object, we can use the formula

F = m * a,

where F is the force, m is the mass, and a is the acceleration.

First, we need to find the acceleration (a) using the formula a = (final velocity - initial velocity) / time.

In this case, the initial velocity is 0 m/s (since the object is at rest), the final velocity is 8.47 m/s, and the time is 7.69 seconds. So the acceleration (a) is:

a = (8.47 - 0) / 7.69 = 1.1 m/s²

Now, we can find the force (F) by multiplying the mass (16.6 kg) by the acceleration (1.1 m/s²):

F = 16.6 * 1.1 = 18.26 N

Therefore, the magnitude of the average force exerted on the object is 18.26 Newtons.

Know more about Magnitude here :

https://brainly.com/question/30015985

#SPJ11

Warm water rises to the top when warm and cold water mix because warm water is less dense; this process is known as convection.

As a result, we can say that the event illustrates convection as a mode of heat transport.

To know more about Warm water

https://brainly.com/question/2783927

#SPJ4

Answer:

Frequency= velocity of radiation÷ wave length

The mass of water that can be heated each day would be 923.1 kg.

We can use the equation:

Q = mcΔT

where Q is the heat energy supplied to the water, m is the mass of the water, c is the specific heat capacity of water, and ΔT is the change in temperature of the water.

We know the heat energy supplied to the water each day, which is:

Q = 19,000,000 J

We also know the initial and final temperatures of the water, which are:

T1 = 7.0 °C

T2 = 55 °C

The specific heat capacity of water is:

c = 4200 J/kg °C

Substituting these values into the equation above and solving for m gives:

Q = mcΔT

m = Q / (cΔT)

ΔT = T2 - T1 = 55 °C - 7.0 °C = 48 °C

m = 19,000,000 J / (4200 J/kg °C * 48 °C)

m = 923.1 kg

Therefore, the mass of water that can be heated each day is 923.1 kg, rounded to 2 significant figures.

More on heat capacity can be found here: https://brainly.com/question/29766819

#SPJ1

Answer:

inert matter -    conservation of momentum , transfer of energy

longitudinal waves -       sound waves, water waves

transverse waves -    electromagnetic signals, light waves

thermodynamic -     weather, refrigeration, thermometers

electrical -      power transmission, lighting

Acceleration can be determined from the slope of the velocity-time graph. The slope of the graph indicates how quickly the velocity is changing over time.

If the slope of the graph is positive and increasing, then the acceleration is also positive and increasing. This means that the object is accelerating in the positive direction (e.g. speeding up in a positive direction).

If the slope of the graph is positive and decreasing, then the acceleration is positive but decreasing. This means that the object is still accelerating in the positive direction, but at a decreasing rate (e.g. slowing down in a positive direction).

Learn more about acceleration:https://brainly.com/question/12550364

#SPJ1

The astronomical system and the microscopic system are the two in which comparisons of the distances between the objects and the sizes of the objects are the most comparable.

Astronomical units, light-years, and parsecs are used in the astronomical system to measure distances between celestial objects such as planets, stars, and galaxies. The diameter or radius of these objects is used to describe their sizes, and these measurements can range from thousands to millions of kilometers.

Distances between microscopic things like atoms, molecules, and cells are measured in nanometers or angstroms in the microscopic system. Similarly to that, these objects' dimensions—which can range from a few nanometers to micrometers—are expressed in terms of their diameter or length.

The sizes of the objects being measured can vary significantly within each system, and both entail measurements of distances that can span several orders of magnitude. In order to compare sizes and distances within each system, one must adopt a similar strategy that involves a thorough understanding of logarithmic scales and the use of the proper units of measurement.

learn more about distance here

https://brainly.com/question/17273444

#SPJ1

The period of oscillation of a spring with a 30 g weight suspended from it and released from rest after being stretched to 23 cm is approximately 0.35 seconds, which can be calculated using the formula T=2π√(m/k), where T is the period, m is the mass, and k is the spring constant.

A spring's oscillation period is the length of time it takes for one full oscillation. Using Hooke's Law, which states that the force needed to stretch or compress a spring is exactly proportional to the displacement from its equilibrium position, we may determine the period of oscillation. This rule allows us to obtain the equation for a spring-mass system's oscillation period, which is dependent on the mass of the spring, the spring constant, and the amplitude of the oscillation. The length of the spring at rest and the length of the spring with a 30 g weight applied are both provided in this issue.

learn more about spring's oscillation here:

https://brainly.com/question/31087657

#SPJ4

Answer:

1. Evaporation

2. Melting

And lastly,

3.Sublimation

Answer:

evaporation, melting,sublimation

Explanation:

For an equipotential surface that surrounds a point charge q and has a potential of 487 v and an area of 1.87 m2, q is equal to 1.45 × 10⁻⁹ C.

Given, V = 487 V.A = 1.87 m²

We know that, the electric potential on an equipotential surface is given by the equation:

V = kq/r

Where, k is Coulomb's constant, q is point charge and r is the distance between the charge and equipotential surface.

The area of the equipotential surface is given by:

A = 4πr²

Thus, r² = A/4πq

r = Vr/kq

r = V(√(A/4π))/k

Now, k = 9 × 10^9 Nm²/C²

Substituting the given values in the above equation, we get,

q = V(√(A/4π))/k

q = 487 (√(1.87/4π))/(9 × 10^9)

q = 1.45 × 10⁻⁹ C.

Hence, the value of point charge q is 1.45 × 10⁻⁹ C.

Know more about equipotential surface here:

https://brainly.com/question/15221483

#SPJ11

After the switch is closed and the current becomes very small, the voltage difference across the capacitor depends on the capacitance of the capacitor and the initial voltage across it.

Assuming that the capacitor was initially uncharged, it will start to charge up as the current flows through the circuit. As time passes and the current becomes very small, the capacitor will approach its maximum charge and the voltage difference across it will approach the same value as the EMF of the battery. However, the voltage across the capacitor will never quite reach the full EMF of the battery because of the presence of the resistor, which limits the current and causes the charging process to be gradual.

learn more about capacitance here:

https://brainly.com/question/17176550

#SPJ1

Answer:B, R,

Explanation:B:BLACK, BLUE, BROWN,

R:RED, Y:

In an earthquake, it is noted that a footbridge oscillated up and down in a one loop (fundamental standing wave) pattern once every 2.0 s. Other possible resonant periods of motion for this bridge include periods in multiples of 2 seconds.

Resonance refers to the condition where an external force or frequency causes an object to oscillate with a larger amplitude at a specific frequency, referred to as its resonant frequency. In general, any object has many resonant frequencies, and when excited with sufficient energy, each of these frequencies will create a resonance where the object will oscillate with a large amplitude.

The resonant frequency is affected by several factors, including an object's size and shape, and its material composition. When an object is excited at its resonant frequency, it can absorb a large amount of energy, and this can cause damage or even destruction of the object. Therefore, it is crucial to know the resonant frequencies of an object to avoid exciting it with similar frequencies.

Here, the footbridge oscillated up and down in a one loop (fundamental standing wave) pattern once every 2.0 s. This means that the footbridge oscillates at a frequency of 0.5 Hz. Therefore, other possible resonant frequencies of the bridge can be determined by multiplying this frequency by an integer (whole number) to obtain its harmonics.

For instance, the first harmonic is two times the fundamental frequency, i.e., 1 Hz, and its period is 0.5 s. The second harmonic is three times the fundamental frequency, i.e., 1.5 Hz, and its period is 0.33 s. The third harmonic is four times the fundamental frequency, i.e., 2 Hz, and its period is 0.25 s. The fourth harmonic is five times the fundamental frequency, i.e., 2.5 Hz, and its period is 0.2 s, and so on.

The above resonant frequencies correspond to the first few harmonics of the footbridge oscillation. The footbridge will respond most strongly to vibrations of these frequencies. In conclusion, the footbridge oscillates at a frequency of 0.5 Hz with a period of 2 seconds. Other possible resonant frequencies can be determined by multiplying this frequency by an integer (whole number) to obtain its harmonics. These harmonics correspond to various frequencies with corresponding periods. The footbridge will respond most strongly to vibrations of these frequencies.

For more such questions on Resonant frequency.

https://brainly.com/question/13040523#

#SPJ11

The correct option is D, The one of statements concerning a convex mirror is true. The picture might be toward the replicate than one produced with the aid of a plane mirror in its vicinity.

A convex mirror, also known as a diverging mirror, is a curved mirror that bulges outward. Unlike a concave mirror, which curves inward and can focus light to create real images, a convex mirror reflects light outwards and cannot create real images.

Convex mirrors are commonly used in situations where a wide field of view is required, such as in car side mirrors, security mirrors, and in stores to help prevent theft. The bulging surface of the mirror allows it to reflect a wider angle of light than a flat mirror or concave mirror would, making it useful for surveillance and safety purposes. Due to their unique reflective properties, convex mirrors can also produce virtual images that appear smaller and farther away than the actual object being reflected.

To learn more about Convex mirror visit here:

brainly.com/question/3627454

#SPJ4

Complete Question: -

Which one of the following statements concerning a convex mirror is true?

a) Such mirrors are always a portion of a large sphere.

b) The image formed by the mirror is sometimes a real image.

c) The image will be larger than one produced by a plane mirror in its place.

d) The image will be closer to the mirror than one produced by a plane mirror in its place.

e) The image will always be inverted relative to the object.

A rock thrown from a 20.0 m bridge with an initial speed of 15.0 m/s strikes the water with a speed of approximately 29.4 m/s, neglecting air resistance, by applying conservation of energy.

The initial potential energy of the rock is given by mgh, where m is the mass of the rock, g is the acceleration due to gravity, and h is the height from which the rock was thrown. Substituting the given values, we have mgh = (m)(9.81 m/s²)(20.0 m) = 196.2 mJ. Since the rock was thrown with an initial speed of 15.0 m/s, its initial kinetic energy is given by (1/2)mv², where v is the initial speed of the rock. Substituting the given values, we have (1/2)(m)(15.0 m/s)² = 112.5 MJ. By the principle of conservation of energy, the final kinetic energy of the rock just before it hits the water is equal to its initial potential energy. Thus, we can set the initial potential energy equal to the final kinetic energy, and solve for the final velocity of the rock just before it hits the water. This gives us (1/2)mv² = mgh, which simplifies to v² = 2gh.

Substituting the given values, we have v² = 2(9.81 m/s²)(20.0 m) = 392.4. Taking the square root of both sides, we find that the speed at which the rock strikes the water is approximately 19.8 m/s.

learn more about conservation of energy here:

https://brainly.com/question/11264649

#SPJ4

Using the kinematic equation for free fall, the depth of the crater on the moon was calculated to be approximately 81.45 meters, given that the acceleration due to gravity on the moon is 1.62 m/s²

We can use the kinematic equation for free fall to determine the depth of the crater:

Δy = 1/2 * g * t²

where Δy is the depth of the crater, g is the acceleration due to gravity on the moon, and t is the time it takes for the rock to hit the bottom of the crater.

Plugging in the given values, we get:

Δy = 1/2 * (1.62 m/s²) * (6.3 s)²

Δy = 81.45 m

Therefore, the depth of the crater is approximately 81.45 meters.

Learn more about the kinematic equation brainly.com/question/28712225

#SPJ4

Explanation:

144 km/hr = 40 km / s

Acceleration = change in velocity / change in time

  Acceleration = 40 m/s / 20 s =  2 m/s^2

d = 1/2 a t^2 = 1/2 (2)(20^2) = 400 meters

A loop of wire with a light bulb and a bar magnet is provided to a class is Position the magnet next to the lightbulb. Option A is Correct Answer.

An electric current flows in a loop of wire when a bar magnet is moved in its direction! This physical process, which is defined by Faraday's law, is the foundation of electric generators. One of the fundamental rules of electromagnetic is Faraday's law.

Rotating a permanent magnet in front of the loop or a wire loop in front of a permanent  light bulb will cause the magnetic flux through the loop to change. The current in the loop starts to flow when the flux varies, creating an emf. An electric generator is available.

Adjust the loop's surface area (increase by expanding the loop, decrease by shrinking the loop) Adjust the angle between the magnetic field vector and the surface specified by the loop.

Learn more about light bulb here

https://brainly.com/question/28916628

#SPJ1

The Complete Question is

A group of students is given a loop of wire connected to a light bulb and a bar magnet They are asked to make the light bulb light up. Which of the following would cause the light bulb to glow?

A. Placing the magnet beside the light bulb.

B. Moving the magnet beside the light bulb.

C. Moving the magnet through the loop of wire.

D. Placing the magnet inside the loop of wire.

The wavelength of the vibration of a string 3 m long fixed on both ends in its fundamental mode is 6 m.


The lowest part of a harmonic vibration, or the lowest frequency at which an oscillation occurs is called fundamental mode of vibration.

The basic mode, or first harmonic, is the simplest normal mode, in which the string vibrates in a single loop and is denoted n = 1.

Given, Length of string, l = 3 m

The wavelength of the vibration can be calculated by the following formula:

Wavelength (λ) = 2l/n

where n is the harmonic or mode of vibration.

As it is vibrating in its fundamental mode, n = 1.

Therefore, Wavelength (λ) = 2l/n= 2 × 3 m / 1= 6 m

The wavelength of the vibration is 6 m.

Know more about fundamental mode of vibration here:

https://brainly.com/question/9758493

#SPJ11