The tendency for different types of rock to weather at different rates is known as differential weathering. This phenomenon occurs due to the varying physical and chemical properties of different rocks.
For example, rocks with a greater porosity and permeability are more likely to absorb water, leading to faster weathering.
In contrast, rocks with low porosity and permeability will not absorb water easily and therefore weather more slowly. Other factors that can influence the rate of weathering include the type of minerals that the rock is composed of and the climate in which it is located. Differential weathering affects the landscape, often leading to the formation of distinctive features such as mesas and canyons.
Know more about porosity here
https://brainly.com/question/2593663#
#SPJ11
how does climate change affectprecipitation patterns which affect the salinity of estuarine habitats.
Climate change has a significant effect on precipitation patterns, which, in turn, affects the salinity of estuarine habitats. Here are the reasons why this occurs: Increased temperatures can cause more evaporation, resulting in less precipitation and a decline in the volume of freshwater entering estuaries.
In contrast, the salinity of estuarine habitats increases with less freshwater because seawater is denser than freshwater, and it sinks below freshwater, causing an increase in salinity. Climate change has also been linked to more frequent and severe weather events, such as droughts, floods, and tropical storms.
These extreme weather events might affect estuaries by altering freshwater inputs and the quantity and quality of nutrients and pollutants that enter them. Therefore, these modifications in precipitation patterns might alter estuarine ecosystems and their communities.
The rise in salinity may have a direct impact on the flora and fauna of estuaries, affecting their ability to adapt and survive. Moreover, high salinity levels could change the rate at which pollutants are eliminated from the ecosystem. As a result, many estuarine habitats will be affected, including those of fish, shellfish, and birds.
The significant effect of climate change on precipitation patterns, which affects the salinity of estuarine habitats, has been mentioned. The rise in temperature can cause increased evaporation, which may result in reduced precipitation and decreased freshwater volume entering estuaries.
In contrast, salinity levels in estuarine habitats increase with less freshwater because seawater is denser than freshwater, and it sinks below freshwater, causing an increase in salinity.
To know more about climate change refer here:
https://brainly.com/question/28779953#
#SPJ11
which statement about moist air moving over a mountain is correct?as air falls on the leeward side of a mountain, it expands and becomes warmer.as air rises on the windward side of a mountain, it contracts and becomes cooler.as air falls on the leeward side of a mountain, it contracts and becomes warmer.as air rises on the windward side of a mountain, it expands and becomes warmer.
As air rises on the windward side of a mountain, it cools and can reach its dew point, causing moisture to condense and form clouds is s correct.
In this case option B is correct
This process is known as orographic lifting. As the air moves over the mountain and descends on the leeward side, it compresses and becomes warmer.
Therefore, the correct statement is: as air rises on the windward side of a mountain, it contracts and becomes cooler, while as air falls on the leeward side of a mountain, it expands and becomes warmer.
To learn more about leeward side here
https://brainly.com/question/994374
#SPJ4
which statement about moist air moving over a mountain is correct?
as air falls on the leeward side of a mountain, it expands and becomes warmeras air rises on the windward side of a mountain, it contracts and becomes cooler. as air falls on the leeward side of a mountain, it contracts and becomes warmer. as air rises on the windward side of a mountain, it expands and becomes warmer.consider layers 1 and 2. by what relative dating principle do we know that these layers were at one time continuous?
The relative dating principle that allows us to determine that layers 1 and 2 were at one time continuous is the Principle of Superposition.
This principle states that the oldest layer of sedimentary rock is on the bottom and the youngest layer is on the top, with each layer in between being of a slightly different age. In terms of layers 1 and 2, this means that at one time, layer 1 was on the bottom and layer 2 was on the top.
Over time, the layers may have been disturbed or eroded, creating gaps where the layers are now separated, but we can still use the Principle of Superposition to determine that the layers were at one time continuous.
Know more about Superposition here:-
https://brainly.com/question/2069576#
#SPJ11
precipitation of gypsum due to evaporation of seawater produces which kind of sedimentary rock? group of answer choices biochemical chemical clastic organic
Clastic sedimentary rock is formed when precipitation of gypsum due to evaporation of seawater occurs.
Clastic sedimentary rock is formed when fragments of pre-existing rocks or minerals are compacted and cemented together. Clastic sedimentary rocks are formed from the accumulation and consolidation of fragments of pre-existing rocks or minerals, which are transported and deposited by various agents such as water, wind, or ice. Examples of clastic sedimentary rocks include sandstone, shale, and conglomerate.
Gypsum is a mineral that can be precipitated from evaporating seawater, but it does not form clastic sedimentary rock. Gypsum can form chemical sedimentary rocks, such as rock gypsum or alabaster.
Learn more about Clastic sedimentary rock at: https://brainly.com/question/30553283
#SPJ11
which method would mitigate climate risks the faster: carbon capture like climeworks or solar geoengineering utilizing crafts such as sail?
The most efficient way to mitigate climate risks is to reduce greenhouse gas emissions through changes in energy production and consumption, and through activities like reforestation.
Carbon capture and solar geoengineering are two possible strategies to reduce the effects of climate change, but neither of them will have an immediate impact on the current climate crisis.
Carbon capture works by removing carbon dioxide from the atmosphere and storing it in either underground geologic formations or in other places. This technique is still relatively new and is being tested for its effectiveness.
Solar geoengineering, on the other hand, involves reflecting some of the sun's rays back into space by launching mirrors into space or through aircrafts spraying aerosols into the atmosphere. Although it is relatively cheap and fast to implement, its effectiveness is uncertain, and it could come with unintended consequences.
Therefore, reducing emissions is still the most efficient and effective way to mitigate climate risks.
TO KNOW ABOUT Carbon:
https://brainly.com/question/22530423
#SPJ11
describe the major differences in the abiotic factors observed in the high tide zone versus the lower inter tidal zone.
The abiotic factors observed in the high tide zone versus the lower intertidal zone are different. The major differences in the abiotic factors observed in the high tide zone versus the lower intertidal zone are as follows:
Abiotic factors in the high tide zone: In the high tide zone, the abiotic factors include temperature fluctuations, wave exposure, and variations in salinity. This region is typically less exposed to sunlight and air because the tide comes in and out of this zone quickly.
The high tide zone can experience strong wave action, as well as wind and water fluctuations. These factors all contribute to making it a challenging environment for plants and animals to survive.
Abiotic factors in the lower intertidal zone: In the lower intertidal zone, the abiotic factors include water pressure, light exposure, temperature fluctuations, and salinity. This region is typically more exposed to sunlight and air because the tide takes longer to come in and out.
The lower intertidal zone also experiences less wave action than the high tide zone. These factors make the lower intertidal zone an easier environment for plants and animals to survive.
To know more about intertidal zone refer here :
https://brainly.com/question/29991373#
#SPJ11
this is a map view of a fault. you are looking down on the fault from above. a) what type of fault is it b) what type of forces are involved c) how would you describe the relative lateral motion?
A.) The type of force that causes it is the compressive force that leads to the relative lateral motion towards each other.
B.) A reverse fault is a type of fault where one block of rocks moves vertically above the other in response to compression.
C.) The rocks move vertically along the fault plane, with the block on one side moving up and the block on the other side moving down.
Reverse faults are characterized by a steep angle of the fault plane and are commonly found in regions of continental crust subjected to compression, such as regions of plate convergence.
The given image shows a reverse fault because the block on the right has been pushed up by the block on the left.
Types of forces involved in a reverse fault: When the compression force pushes two blocks of rock towards each other, it creates a reverse fault.
For such more question on lateral:
https://brainly.com/question/30483578
#SPJ11
what is the most critical physical environmental factor determining the differences between the zones?
The most critical physical environmental factor determining the differences between the zones is temperature and precipitation.
In geography, the different zones that are found in the world's environment are known as biomes. The atmosphere, hydrosphere, lithosphere, and biosphere are the four essential spheres of the environment. There are several significant environmental factors that determine the difference between the zones, including temperature, precipitation, latitude, altitude, relief, soil, and wind.
The most critical physical environmental factor determining the differences between the zones is temperature and precipitation.
The temperature is critical because it affects the rate of photosynthesis and the quantity of vegetation that grows in a specific area. The number of daylight hours and the time of the year also influence the temperature.Precipitation is equally important in determining the differences between the zones. Precipitation influences the availability of water, which is a fundamental requirement for life. Plants, animals, and humans require water for various reasons, including drinking, cleaning, and survival. Precipitation also affects the rate of evaporation and transpiration, which affects the water cycle in the environment, leading to the formation of different zones in the world's environment.To learn more about the "temperature and precipitation": https://brainly.com/question/29332171
#SPJ11
what is a common distinguishing characteristic of sedimentary rock masses? group of answer choices they are always very colorful. they tend to be layered. all of the choices they are formed by solidification from a melt. they tend to be extremely hard.
A common distinguishing characteristic of sedimentary rock masses is that they tend to be layered.
Sedimentary rocks are created by organic or mineral particles building up or storing at the Planet's surface, then binding those particles together. Sedimentary rocks are often found in strata, which are horizontal layers.
Undisturbed strata have younger layers on top of older levels. The superposition law is in effect here. Sedimentary Strata can be cut by other geologic components like intrusions or faults. An Earth's crustal fracture is known as a fault. Within the Earth's crust, a mass of sedimentary rock known as an incursion was formed. When two features cross, the younger feature is the one that pierces the other.
Learn more about Sedimentary Rocks here:
https://brainly.com/question/7437433
#SPJ4
__________ extend into the water to reduce the energy from waves thereby reducing their power. They cause a break in the longshore current.
Breakwaters extend into the water to reduce the energy from waves thereby reducing their power. They cause a break in the longshore current.
A breakwater may be a natural or man-made structure that is intended to act as a barrier against the action of waves. Breakwaters have various forms and designs, but they are typically made of rock, concrete, or other durable materials that can withstand the forces of waves. Breakwaters can help to control the direction of longshore currents by creating a barrier that redirects the flow of water. They cause a break in the longshore current, which can help to reduce erosion along the shoreline. They can also be used to protect harbors and other marine structures from the damaging effects of waves and currents.
Learn more about breakwater here: https://brainly.com/question/30458967
#SPJ11
for a surface low pressure system to intensify, where must the upper-level trough be located relative to the surface low? group of answer choices north of the surface low south of the surface low west of the surface low east of the surface low directly above the surface low
For a surface low pressure system to intensify, the upper-level trough must be located to the west of the surface low. Therefore the correct option is option C.
A low-pressure system is a location on Earth's surface where the air pressure is lower than that of surrounding locations. As air moves away from a low-pressure area, it rises and cools, generating clouds and potentially precipitation.
The cyclonic flow of the air around a low-pressure area, where the air is flowing counterclockwise in the Northern Hemisphere, is another feature of a low-pressure area.
The airflow toward the low-pressure area at the surface is pulled inward and upward, resulting in air rising and the production of clouds, rain, and other weather events. Therefore the correct option is option C.
For such more question on surface:
https://brainly.com/question/1406428
#SPJ11
The following question may be like this:
For a surface low pressure system to intensify, where must the upper-level trough be located relative to the surface low? group of answer choices
north of the surface low
south of the surface low
west of the surface low
east of the surface low
directly above the surface low
what map would you examine to locate the polar jet stream? group of answer choices surface map 900 mb 700 mb 500 mb 300 mb
To locate the polar jet stream, you would need to examine a 500 mb map.
To locate the polar jet stream, you would typically examine the 300 mb map, which shows the atmospheric pressure and wind patterns at an altitude of approximately 30,000 feet (9,144 meters). The polar jet stream is a high-speed, meandering air current that flows from west to east around the polar regions in the upper troposphere and lower stratosphere. The 300 mb map provides a good representation of the location and strength of the polar jet stream, as well as other major wind patterns in the atmosphere.
Read more about meteorology here :https://brainly.com/question/29766406
#SPJ11
describe the trend in shallow groundwater and subsurface soil temperatures that you observe moving from north to south along the line you drew
Generally, it is important to note that the trends have significant impacts on ecosystems, agricultural productivity, and human societies, and monitoring and managing these resources is crucial for sustainable development.
What trend do we have in shallow groundwater and subsurface soil temperatures?in general, the trends in shallow groundwater and subsurface soil temperatures can vary depending on the location and time of year. In some areas, there may be a trend towards declining water levels and increasing soil temperatures due to factors such as drought, overuse of groundwater, and climate change.
In some other areas, there may be a trend towards rising water levels and decreasing soil temperatures due to factors such as increased precipitation, improved water management practices, and natural fluctuations in the hydrologic cycle.
Read more about subsurface
brainly.com/question/2982017
#SPJ1
how do present-day rivers compare to what those same rivers would have been like at the end of the glacial ages? multiple choice question.
Rivers today differ significantly from what they would have been like during the glacial ages. The rivers would have been wider, deeper, and more sinuous, with fewer meanders and a greater variety of aquatic species. Additionally, they would have had increased erosion and more sediment in the water. Correct answer is all of the above, option D
Additionally, there would have been more debris and sediment in the water, such as sand, gravel, and boulders, as well as a greater variety of aquatic species. The rivers of today are very different from what they would have been during the last glacial period. Most rivers would have been bigger and deeper at that period because of increased erosion brought on by more glacier runoff. Since that glacial melt water is more strong and swift than current rivers, they would also be more sinuous and have fewer meanders.
Know more about aquatic species here:
https://brainly.com/question/14127501
#SPJ11
Correct question would be " how do present-day rivers compare to what those same rivers would have been like at the end of the glacial ages? options could include a) wider, deeper, and more sinuous; b) fewer meanders and a greater variety of aquatic species; c) increased erosion and more sediment in the water; or d) all of the above"
6.5. what is harmonic tremor? question 5 options: a. a large earthquake that causes landslides b. a seismographic reading that indicates magma is on the move c. ground shaking due to hydrothermal activity d. the manner in which the ground shakes due to a stampede of buffalo
A harmonic tremor is a type of seismic activity characterized by a continuous, low-amplitude ground shaking. The release of large amounts of stored energy in the form of volcanic or geothermal activity generally causes it.
Harmonic tremors can indicate that magma is on the move or that pressure is building up within a volcano's plumbing system. In some cases, they may also be caused by hydrothermal activity or by the motion of glaciers.
In general, harmonic tremors are seen as a warning sign of potential future volcanic activity. They can be used to alert scientists and other officials to take preventive steps to protect nearby populations. It is also possible to monitor harmonic tremors to gain insight into volcanic activity and the behavior of magma within the volcano's plumbing system.
To learn more about magma here:
https://brainly.com/question/13716544#
#SPJ11
the primary reason why north america has a high number of, and certainly much more than its global share, severe thunderstorms, is the:
The primary reason why North America has a high number of severe thunderstorms is the collision of air masses.
North America is located in an area where cold air from Canada meets warm, moist air from the Gulf of Mexico. This creates a boundary called a "front" where the two air masses collide, causing the warm air to rise rapidly and form thunderstorms. This collision of air masses occurs frequently in North America, leading to a high number of severe thunderstorms. Additionally, the geography of North America, with its varied topography and large bodies of water, creates ideal conditions for the formation of thunderstorms.
To know more about collision click here:
brainly.com/question/13138178
#SPJ4
geologists measure the orientation of tilted rock layers. dip is the angle of inclination from the horizontal of a tilted rock layer. the compass bearing of a rock layer where it pierces the horizontal plane is called
The dip of a tilted rock layer is the angle of inclination from the horizontal. The compass bearing of a rock layer where it pierces the horizontal plane is called the strike. The dip and strike measurements are important tools used by geologists to understand the structural geology of an area.
Strike is the compass direction of a line formed by the intersection of a tilted rock layer and a horizontal plane. It is measured in degrees, typically with reference to the four cardinal directions (north, south, east, and west). Strike is an important tool for geologists to understand the orientation of a rock layer, which is useful for identifying different kinds of geological structures and interpreting the underlying geology.
The dip is the angle of inclination from the horizontal of a tilted rock layer. It is also measured in degrees and can be described as either up-dip or down-dip. Dip measurements are useful for understanding the attitude of a tilted rock layer relative to the horizontal plane, as well as helping geologists to identify different types of geological structures.
Geologists measure the orientation of tilted rock layers using the dip and strike measurements. The two measurements can be used together to accurately describe the attitude of a rock layer relative to the horizontal plane. These measurements are essential for geologists to understand the underlying geology of an area.
To learn more about rock here:
https://brainly.com/question/25846908#
#SPJ11
a spinel found in metamorphic rock or an aquamarine found within a pegmatite are examples of what type of deposit
A spinel found in metamorphic rock or an aquamarine found within a pegmatite are examples of hydrothermal deposits.
What are hydrothermal deposits?
Hydrothermal deposits are rocks containing mineral deposits that originated from hot water (hydrothermal) fluids circulating in the Earth's crust.
Hot water deposits often contain significant quantities of minerals, which are usually accompanied by the alteration of the surrounding rock. The hot water that makes up these deposits is generated by heat from the Earth's core, which is transferred through the mantle to the Earth's crust.
When the water is heated, it is driven to the Earth's surface, where it flows through cracks and fissures in the rock.
The water then cools, and minerals precipitate out of the solution, forming hydrothermal deposits. There are various types of hydrothermal deposits, including gold, silver, copper, zinc, and lead deposits, among others.
These deposits are commonly found in areas where tectonic plates meet, and the Earth's crust is being pushed and pulled in various directions.
To know more about Hydrothermal deposits, refer here:
https://brainly.com/question/14308184
#SPJ11
how long will it take for a 10km-tall thunderstorm (a thunderstorm whose top is at 10 km in elevation) to form above mt. humphreys if the updraft winds are 350m/min and the cloud base is 500m above the peak?
It will take 28.57 minutes for a 10km-tall thunderstorm to form above Mt. Humphreys if the updraft winds are 350m/min and the cloud base is 500m above the peak.
The amount of time it takes a 10km-tall thunderstorm (a thunderstorm whose top is at 10 km in elevation) to form above Mt. Humphreys provided that the updraft winds are 350m/min and the cloud base is 500m above the peak is calculated as using the formula:
Time required to form the cloud = H/U,
where H is the height and U is the updraft speed
In this case, Height of the thunderstorm = 10 km, Height of the base of cloud = 500 mm and Updraft speed = 350 m/min.
Plugging in values in the formula:
Time taken to form a thunderstorm of height 10 km = 10000/350=28.57 minutes (approx.)
Therefore, it will take approximately 28.57 minutes to form a 10km tall thunderstorm above Mt. Humphreys if the updraft winds are 350m/min and the cloud base is 500m above the peak.
Learn more about Thunderstorm:
https://brainly.com/question/29808425
#SPJ11
many macro-level factors have shaped our micro-level choices in dating patterns today. which is not one of these macro-level factors?
Influence of friends on our dating patterns is not a macro-level factor that has shaped our micro-level choices in dating patterns today.
What are macro-level factors?
Macro-level factors refer to broad social and cultural changes that have influenced dating patterns over time. These factors are usually beyond the control of the individual, but they can have a significant impact on the choices people make in their dating lives.
Examples of macro-level factors include demographic changes, economic factors, and technological advancements.
Some of the macro-level factors that have shaped our micro-level choices in dating patterns today include:
1. Demographic changes:
Changes in population size, age, and gender distribution have had a significant impact on the dating patterns of individuals.
2. Technological advancements:
The rise of the internet, social media, and dating apps have revolutionized the way people meet and interact with potential partners.
3. Economic factors:
Changes in the job market and the availability of education and opportunities have affected people's preferences in dating partners.
4. Cultural and social changes:
Changes in attitudes towards gender roles, sexuality, and marriage have influenced people's dating preferences and practices.
5. Influence of friends on our dating patterns:
Influence of friends is not a macro-level factor that has shaped our micro-level choices in dating patterns today. Rather it is a micro-level factor that influences our choices in dating. Friends can help to facilitate or discourage dating relationships, and they can also influence our preferences in potential partners.
To know more about micro-level, refer below:
https://brainly.com/question/14816527
#SPJ11
true or false. as measured from its base (seafloor) to its top, the big island of hawaii is the tallest mountain on earth
The following statement "the big island of Hawaii is the tallest mountain on earth" is True.
The Big Island of Hawaii is the tallest mountain on earth if measured from its base (seafloor) to its top. The mountain Mauna Kea is the highest peak in Hawaii, standing at 4,205 meters.
However, when measured from the sea floor, it is the highest mountain in the world with a height of 10,200 meters.
What are the eight islands that make up the state of Hawaii?
The state of Hawaii is made up of eight main islands. They are listed below in alphabetical order: Hawaii, also known as the Big Island of Hawaii, is the largest island in the chain. It is home to Mauna Kea, the world's tallest mountain when measured from its base. Maui is the second-largest island, and it is home to Haleakala, a dormant volcano that stands at over 10,000 feet tall.
Oahu, also known as the "Gathering Place," is the third-largest island in the chain. Honolulu, the state capital, is located on this island. Kauai is the fourth-largest island in the chain, and it is known for its stunning natural scenery and laid-back vibe. Lanai is the sixth-largest island and is known for its remote beauty and luxury resorts.
Molokai is the fifth-largest island and is known for its rugged, untouched landscape. Niihau is a privately-owned island that is home to a small population of Native Hawaiians. Kahoolawe is the smallest of the main Hawaiian Islands and is uninhabited.
To know more about big island of Hawaii, refer here:
https://brainly.com/question/30711133
#SPJ11
california has 2 major underground basins one in owens valley what is the geological name for them? v what is the geologic name for them?
Answer:
the basin and range
Explanation:
California has two major underground basins: the Owens Valley Basin and the Salinas Valley Basin. The Owens Valley Basin is a tectonic depression in the Great Basin province of California, named for its location in the Owens Valley region. The Salinas Valley Basin is an underground sedimentary basin located in California's Central Coast region. It is composed of sandstone and shale deposits.
The Great Basin Province is a major physiographic province that covers much of the interior western United States and southwestern Canada. It is composed of four tectonic plates—the Sierra Nevada–Great Valley block, the Pacific block, and consists of numerous valleys and basins, including the Owens Valley and Salinas Valley basins.
The rocks found in the Great Basin Province are sedimentary and range from several million years to over 200 million years old. So two major basins are the Owens Valley Basin and the Salinas Valley Basin.
Know more about California here:
https://brainly.com/question/30050163
#SPJ11
|Test pls help!|
10. Analyze the relationship between CO2 emissions and surface temperature change between 1950 and 2000 using the data presented in the graphs.
A. Increased emissions leads to an increase of CO2 in the atmosphere, which has no relation to the increase in temp
B. increased emissions leads to an increase of CO2 in the atmosphere, which may be the cause of the increase in temp
C.Increased emissions leads to a decrease of CO2 in the atmosphere, which may be the cause of the increase in temp
D. increased emissions leads to an increase of CO2 in the atmosphere, which may be the cause for the decrease in temp
Answer :B. increase emissions leads to an increase of CO2 in the atmosphere which may be the cause of the increase in temperature
Answer:
b
Explanation:
the majority of the rocks that form at the surface of the earth are group of answer choices intrusive igneous rocks. foliated metamorphic rocks. sedimentary rocks. non-foliated metamorphic rocks.
Intrusive igneous rocks are rocks that form when magma cools and solidifies underground. They form in plutonic (intrusive) environments. The majority of the rocks that form at the surface of the earth are Intrusive igneous rocks. the correct answer choice is first option.
Intrusive rocks are typically more coarse-grained than extrusive igneous rocks because of their slow cooling time. Foliated metamorphic rocks are rocks that have been subjected to intense heat and pressure, causing the minerals within the rock to re-crystallize. These rocks have a foliated (layered) appearance, and are typically formed in tectonic plate boundaries and near active volcanoes. Sedimentary rocks are formed from sediment that is deposited over time, and can include minerals, fragments of rock, and even fossilized plant and animal remains.
Non-foliated metamorphic rocks are rocks that have been subjected to intense heat and pressure, causing the minerals to re-crystallize, but without any foliation or layering. Examples of non-foliated metamorphic rocks include quartzite and marble. All of these rocks are formed at the surface of the Earth and contribute to the overall geology and landscape.
Know more about igneous rocks here:
https://brainly.com/question/1743302
#SPJ11
__________ are used to prevent erosion. They are structures built out into the water or parallel to the beach. They cause the wave to hit them first, reducing the carrying power of the waves, which prevents the beach from eroding.
Breakwaters are used to prevent erosion. They are structures built out into the water or parallel to the beach. They cause the wave to hit them first, reducing the carrying power of the waves, which prevents the beach from eroding.
What is erosion?The natural process by which the surface of the earth is worn away by wind, water, or other geological processes is known as erosion. Erosion is a naturally occurring process that affects all landscapes. Human activities, such as farming, deforestation, and construction, can exacerbate erosion issues by eliminating vegetation that would usually hold soil in place and by intensifying the impacts of rain and wind on the land.
How do breakwaters work?Breakwaters work by deflecting wave energy away from shorelines, decreasing the velocity of waves that eventually reach the shore, and increasing the distance over which wave energy dissipates, lowering the erosive force of waves. Breakwaters can be either submerged, which means they're below the water's surface, or above water, which means they're above the water's surface. Breakwaters are often constructed in long lines to reduce wave energy from longshore drift and prevent beach erosion.
Learn more about Breakwaters here: https://brainly.com/question/30458967
#SPJ11
the earth's lowest barometric pressures are associated with hurricanes (typhoons). frontal systems (cold and warm fronts). sea level. cold and dry climates. very cold temperatures.
The Earth's lowest barometric pressures are associated with hurricanes (typhoons).
What are hurricanes (typhoons)?
Hurricanes or typhoons are severe tropical storms characterized by low atmospheric pressure, heavy rain, and strong winds. In the West, hurricanes are called typhoons in the East. Such storms develop in the Atlantic Ocean, Gulf of Mexico, and the Caribbean Sea in the United States.
Typhoons are formed in the Pacific Ocean, especially in Japan and the Philippines.
What is barometric pressure?
Barometric pressure is a measure of air pressure that varies from location to location. The pressure exerted by the weight of the atmosphere on the Earth's surface is known as barometric pressure.
The barometric pressure is measured in units of mercury millimeters (mmHg) or inches of mercury (inHg) in the United States, as well as in millibars (mb) or kilopascals (kPa) in other countries. The Earth's lowest barometric pressures are associated with hurricanes (typhoons).
Hurricanes (typhoons) are storms characterized by low atmospheric pressure, heavy rain, and strong winds. When such a storm passes through an area, it causes the barometric pressure to decrease, resulting in the lowest barometric pressures.
To know more about hurricanes (typhoons), refer here:
https://brainly.com/question/30488643
#SPJ11
what is causing the northern sea route to become more attractive as a shipping route between europe and asia?
The Northern Sea Route (NSR) is becoming increasingly attractive as a shipping route between Europe and Asia due to climate change and associated ice melting.
The NSR is a sea route connecting the Atlantic and Pacific oceans that stretches along the Russian Arctic coast and crosses the Arctic Ocean, with the route taking 30-40% less time than via the Suez Canal. In recent years, as the Arctic has experienced increased warming, the amount of sea ice has decreased, making the route more navigable. This has made the NSR more attractive as it provides a shorter, more reliable, and more efficient route.
Additionally, rising fuel costs are making it more economically attractive to traverse the NSR than the Suez Canal. As the ice continues to melt and climate change makes the Arctic even more navigable, the attractiveness of the Northern Sea Route is likely to increase even further.
To learn more about Suez Canal here:
https://brainly.com/question/15506751#
#SPJ11
The _____ ______ of the divide is the Rocky Mountains, and it is called the Continental Divide.
The highest point of the divide is the Rocky Mountains, and it is called the Continental Divide.
The Continental Divide is a long natural boundary that separates the rivers that flow westward from those that flow eastward in North America. The Rocky Mountains of the United States and Canada are its most notable feature. The Continental Divide, also known as the Great Divide, follows a winding route through the Rocky Mountains and across western North America. It extends from Alaska to Mexico, running through the United States and Canada.
The Great Divide runs along the top of the Rocky Mountains. It serves as a geographic boundary separating the continent's western and eastern parts. On the west of the Great Divide, all water drains into the Pacific Ocean. On the east side of the Great Divide, all water runs into the Atlantic Ocean. The height of the divide ranges from just a few inches to more than 14,000 feet above sea level.
Learn more about Rocky Mountains at https://brainly.com/question/30044306
#SPJ11
which of the pre-columbian sites below is located in south america? palenque tikal tiwanaku teotihuacan
Teotihuacan is the pre-columbian archaeological site located in Central Mexico, in the State of Mexico, that was built around 100 BC. It is widely accepted that Teotihuacan was one of the most influential cities of the ancient Americas and one of the largest cities in the world during its prime.
It is the most visited archaeological site in Mexico and is a UNESCO World Heritage Site. Teotihuacan was the largest city in the pre-Columbian Americas, with an estimated population of 200,000 people at its peak. Palenque, Tikal, and Tiwanaku are all pre-Columbian archaeological sites located in Mesoamerica, Central America, and South America, respectively.
Teotihuacan is located in Central Mexico, about 40 miles (64 km) northeast of modern-day Mexico City. Its layout and architecture have been influenced by several different cultures, including the Maya, Zapotec, and Toltec civilizations. The city is laid out in a grid pattern with broad plazas and avenues connecting the various pyramids, palaces, and temples.
Teotihuacan is famous for its monumental architecture, especially the two large pyramids of the Sun and Moon. It is also renowned for its extensive mural and sculptural artwork, and its archaeological record is one of the most important sources of information about ancient Mesoamerican civilizations.
To learn more about Teotihuacan here:
https://brainly.com/question/1129279#
#SPJ11
the downfall of which ancient civilization in the mediterranean closely followed the caldera-forming eruption at santorini?
The Minoan civilization, which was located on the island of Crete, is the ancient civilization in the Mediterranean that closely followed the caldera-forming eruption at Santorini. Santorini is a small group of islands located in the Aegean Sea.
The Minoan civilization was one of the earliest civilizations in Europe, dating back to around 3000 BC.The Minoan civilization was a highly advanced society that was known for its art, architecture, and engineering. They were also known for their extensive trade networks that spanned across the Mediterranean.
However, the civilization came to an abrupt end around 1450 BC, which is thought to have been caused by the volcanic eruption on Santorini.The eruption is believed to have caused a massive tsunami that devastated the Minoan civilization, wiping out their crops and flooding their cities.
The aftermath of the eruption also caused a volcanic winter, which led to a decrease in global temperatures and a reduction in agricultural yields. This, in turn, caused widespread famine and disease, which ultimately led to the downfall of the Minoan civilization.
TO KNOW ABOUT Minoan civilization:
https://brainly.com/question/12573869
#SPJ11