Design an Android Application that fulfill the following requirements.
1. It has tree Activities
2. Main Activity should be three buttons
Show Calculator UI at Second Activity
1. When Click C Button, Move Back towards Main Activity.
Show Text View and Edit Box at third activity with tow buttons.
1. When Click First Button, Text of Edit Text will be viewed at Text View
2. When Click Second Button, Move Back towards Main Activity.
using Android studio
Answers
1. To display the text from the edit box in the text view when the user clicks the first button, give them IDs in the XML file, find them in the Java code, and set an onClickListener that retrieves the text and sets it to the text view.
2. To move back to the main activity when the user clicks the second button, give it an ID in the XML file, find it in the Java code, and set an onClickListener that calls the finish() method.
To design such an Android application follow the following steps:
1: Opening Android Studio and creating a new project.
Once you have created a new project, we can start designing the layout for the third activity.
First, open the activity_third.xml file and add a text view and an edit box to the layout. We can do this by dragging and dropping these elements from the palette onto the design view. Then, we can set the appropriate properties for each element, such as the size, position, and text.
Next, we can add the two buttons to the layout. One button will display the text from the edit box in the text view, and the other button will take us back to the main activity. We can use the onClick attribute to specify the functions for each button.
Once the layout is complete, we can move on to the Java code for the third activity. Here, we can define the functions for each button, such as displaying the text in the text view or returning to the main activity.
2: When the user clicks the first button, we want to display the text from the edit box in the text view. Here's how we can do that:
First, let's give the edit box and the text view some IDs so we can refer to them in our Java code. In the activity_third.xml file, add the following attributes to the edit box and the text view:
The program is attached in the first picture below.
Now that we have IDs for the edit box and the text view, we can reference them in our Java code. In the ThirdActivity.java file, add the following code to the onCreate() method:
The program is attached in the second picture below.
Here, we find the first button, the edit box, and the text view by their IDs using the findViewById() method.
Then, we set an onClickListener for the first button that retrieves the text from the edit box using getText().toString(), and sets that text to the text view using setText().
3: When the user clicks the second button, we want to move back to the main activity. Here's how we can do that:
We have an ID for the second button, we can reference it in our Java code. In the ThirdActivity.java file, add the following code to the onCreate() method:
The program is attached in the third picture below.
Here, we find the second button by its ID using the findViewById() method. Then, we set an onClickListener for the second button that simply calls the finish() method, which will close the current activity and return to the main activity.
Now when the user clicks the second button, the app will move back to the main activity.
To learn more about programming visit:
https://brainly.com/question/14368396
#SPJ4
Related Questions
Problem III (20pts): Signals, Systems, Fourier Transforms, and Duality Properties sinan) Given tvo sine-pulses, (t) = sinc(21) and x()=sine) with sinett) 1. (Apts) Sketch the time domain waveforms of these two sine-pulse signals and mark your axes 2л 2. (4pts) Using FT property to find and sketch the frequency domain spectra of h(t) and c() as functions of Hertz frequency f = i.e. H(S)= ? vs. f and X(t) = ? vs. / in Hz, and mark your axes. 3. (6pts) Now, the steady-state response of a LTI system, y(t) is the convolution of two sinc-pulses, i.e. y()= x(1) h(t). Find and simplify the expression of y(t) = ? 4. (6pts) For a new LTI system with a switched choice of input and impulse response, say h(t) = sinc() and X(t) = sinc(21), what happens to the detailed expression of the output y(t) = ? in terms of its relationship to input x(1) = -sinc(21)? 2
Answers
In this problem, we are given two sine-pulse signals and asked to analyze their time domain waveforms and frequency domain spectra. We also need to find the steady-state response of a linear time-invariant (LTI) system.
1. To sketch the time domain waveforms of the two sine-pulse signals, we plot their values as functions of time. The sinc(2πt) waveform has a main lobe centered at t = 0 and decaying sinusoidal oscillations on either side. The sine(2πt) waveform represents a simple sinusoidal oscillation. 2. Using the Fourier Transform property, we can find the frequency domain spectra of the signals. The Fourier Transform of sinc(2πt) results in a rectangular pulse in the frequency domain, with the width inversely proportional to the width of the sinc pulse. The Fourier Transform of sine(2πt) is a pair of impulses symmetrically located around the origin.
3. The steady-state response of a system, y(t), can be obtained by convolving the input signal x(t) and the impulse response h(t).
Learn more about linear time-invariant here:
https://brainly.com/question/32699467
#SPJ11
The circuit shown below contains a time-varying source and has the following parameters for t≥ 0: vs(t) = 11e-⁹t V, R = 59, The initial current i through the inductor at t = 0 is unknown, but it has an observed value of 0.3 A at t = 0.7 s. Show that for t> 0, the indicated current i has a response given by and hence determine the value of the constant K₁ (in A) in the response. 0.35 Correct Answer: 0.7212 L = 4 H. i(t)= Kie + Koe ₂t A, for some constants K₁, K2, A₁, and A2, where A₁ < A2, t=0. R vs(t)
Answers
This problem concerns the dynamics of an RL circuit with a time-varying source.
The source is an exponential function, and the inductor's current, which starts from an unknown value at t=0, is observed to be 0.3A at t=0.7s. We need to formulate a general solution for the current i(t) and determine the constant K₁. Given that the governing equation of an RL circuit is L(di/dt) + Ri = vs(t), we can integrate this equation over time to find the current. As vs(t) is an exponential function, i(t) should have a similar form, allowing us to match coefficients and solve for K₁, given the initial conditions. It's important to note that the solution will depend on the values of L, R, and the particular form of vs(t).
Learn more about RL circuits here:
https://brainly.com/question/29554839
#SPJ11
A development strategy" is defined here as the engineering process adopted to take a complex system from conceptual design into the utilisation phase of its lifecycle. Throughout this course, we discussed a generic strategy that we illustrated using a VEL" construct commonly termed as the waterfall approach in his paper. Dorfman discusses a number of alternative strategies that can be considered by systems engineers when deciding how to engineer a complex system and manage technical risks. List the other development strategies covered in the paper by Dorfman and what specific technical risks the different strategies are aimed at addressing Use the editor to formof your answer
Answers
A development strategy is defined as the engineering process adopted to take a complex system from conceptual design into the utilisation phase of its lifecycle.
Dorfman in his paper on the engineering of complex systems discussed a generic strategy that was illustrated using a VEL construct commonly termed as the waterfall approach. Along with the waterfall approach, Dorfman also discusses a number of alternative strategies that can be considered by systems engineers when deciding how to engineer a complex system and manage technical risks.
The other development strategies covered in the paper by Dorfman are:Iterative Development: Iterative development strategy is aimed at addressing the technical risks of requirements volatility, incomplete or incorrect understanding of the requirements by the developer, and stakeholder perception of system functionality.
The key objective of this approach is to deal with the system's risks through repetitive development and testing cycles that help mitigate the risks associated with a complex system.
This strategy is suitable for projects that require a significant level of stakeholder engagement and the stakeholders have a high level of interest in the outcome of the project.Incremental Development: Incremental development is aimed at addressing the technical risks of system architecture and integration. The objective of this approach is to divide the entire system into subsystems and develop each subsystem independently. In addition, each subsystem is integrated and tested before moving on to the next subsystem.
This approach is suitable for large-scale projects that require a significant level of integration of different subsystems or for projects that require a quick turnaround time and where the development team does not have a complete understanding of the entire system's requirements. It also helps to break down the development process into smaller parts, making it easier to manage and control.Overall, the choice of development strategy to adopt should be determined by the technical risks that are being faced by the project team, and the objectives and requirements of the project.
Learn more about engineering :
https://brainly.com/question/31140236
#SPJ11
Given the following 1st order transfer function: 200 8+100 HA(8) HB(8) = 1 Hc(8) HD(8) 38+6 50 8+10 18 Answer the following questions: Assume that the input signal u(t) is a step with amplitude 10 at t = 0. Which transfer function corresponds to a steady-state value y()=50? OH (8) HD(8) OHA(8) Hc(8) Assume that the input signal u(t) is a step with amplitude 6 at t = 200. Which transfer function corresponds to a steady-state value y()=12? O HD(8) Hc(8) HB(8) OHA(s) Which transfer function corresponds to the fastest process? HD(8) Hc(8) HA(8) HB(8) Which transfer function corresponds to the slowest process? OHA(8) OHB(8) Hc(8) HD(8) Assume that the input signal u(t) is a step with unknown amplitude at t = 7 and that the steady-state value is y()=10. Which transfer function corresponds to an output signal y(t)=6.3 at t = 8? OHB(8) o Hc(8) OHA(8) HD(8)
Answers
Given the 1st order transfer function: \[\frac{200}{s+8}+\frac{100}{s+6}H_A(s)H_B(s) = \frac{1}{s}\frac{50}{s+18}+\frac{10}{s+38}H_C(s)H_D(s)\] where u(t) is a step with amplitude 10 at t=0.1. The transfer function corresponding to a steady-state value y(∞)=50 is H_C(s). The transfer function corresponds to a steady-state value y(∞)=12 at t=200 when u(t) is a step with amplitude 6 is H_B(s). The transfer function corresponding to the fastest process is H_C(s).
The transfer function corresponding to the slowest process is H_A(s). The transfer function corresponds to an output signal y(t)=6.3 at t=8 when the input signal u(t) is a step with unknown amplitude at t=7 and the steady-state value is y(∞)=10 is H_B(s). Hence, the answer is OHB(8).
to know more about the transfer function here:
brainly.com/question/28881525
#SPJ11
USING REACT AND JS: Suppose there is a form where users input data such as : Name, Email, Payment Amount, Payment Type, Notes. When the form is submitted, have all of this information appear in a public feed.
NOTE: The idea here is when someone new logs in, the public feed will still contain the payment info from the previous users. The public feed information will not clear.
Answers
To implement the mentioned functionality using React and JavaScript, you can create a form component that captures user input for Name, Email, Payment Amount, Payment Type, and Notes. Upon form submission, you can store this data in an array or an object in the component's state.
How can you implement a public feed in React and JavaScript where submitted payment information is accumulated without clearing previous entries?To implement the mentioned functionality using React and JavaScript, you can create a form component that captures user input for Name, Email, Payment Amount, Payment Type, and Notes.
Upon form submission, you can store this data in an array or an object in the component's state. Additionally, you can have a separate component for the public feed that receives the data from the form component as a prop.
The public feed component will maintain its own state, which includes an array of all the submitted form data.
Each time a new form is submitted, the new data will be added to the existing array without clearing the previous data. This ensures that the public feed retains the payment information from previous users.
To display the public feed, you can iterate over the array of form data in the public feed component and render the required information. This way, whenever a new user logs in or submits the form, the public feed will update with the new payment information while preserving the existing data.
By implementing this approach, you can create a persistent public feed that continuously accumulates payment information from different users without clearing the previous entries.
Learn more about JavaScript
brainly.com/question/16698901
#SPJ11
P a and at 17 up 1.0 kPa. Q. 5. A furnace is fired with coke containing 90% carbon and 10% ash. The ash pit residue after being washed with water analyze 10% carbon; 40% ash and rest water. The flue gas analysis shows CO₂- 14%; CO- 1% ; O₂- 6.4% and rest N₂. Calculate the following: (a) Volume of flue gas produced at 750 mm Hg and 250°C per tonne of coke charged. (b) % Excess air used (c) % of carbon charged which is lost in the ash C
Answers
The volume of flue gas produced per tonne of coke charged is calculated using the given flue gas composition and conditions. The % excess air used is determined by comparing the actual amount of air used with the stoichiometric requirement. The % of carbon charged that is lost in the ash is calculated based on the composition of the ash pit residue.
(a) To calculate the volume of flue gas produced per tonne of coke charged, we need to consider the composition of the flue gas and the given conditions. The flue gas consists of CO₂, CO, O₂, and N₂. The total volume of flue gas can be obtained by summing the individual volumes of each gas component. Since the volume is influenced by pressure and temperature, we need to convert the given pressure of 750 mm Hg to an absolute pressure in atmospheres (atm) and the temperature of 250°C to Kelvin (K). Using the ideal gas law, we can calculate the volume of flue gas produced.
(b) The % excess air used can be determined by comparing the actual amount of air used with the stoichiometric requirement. The stoichiometric requirement is the theoretical amount of air needed for complete combustion of the coke, considering its carbon content. By knowing the composition of coke (90% carbon), we can calculate the stoichiometric air requirement using the stoichiometry of the combustion reaction. The actual amount of air used can be determined by subtracting the oxygen content in the flue gas from the stoichiometric oxygen requirement. The % excess air used is then calculated by comparing the actual air used with the stoichiometric requirement.
(c) The % of carbon charged that is lost in the ash can be determined based on the composition of the ash pit residue. The ash pit residue contains 10% carbon and 40% ash. The rest is water. We need to calculate the mass of carbon lost in the ash per tonne of coke charged. This can be done by multiplying the carbon content in the ash pit residue by the mass of the residue produced per tonne of coke charged. Finally, we calculate the % of carbon lost by dividing the mass of carbon lost in the ash by the mass of carbon charged and multiplying by 100.
Learn more about absolute pressure here:
https://brainly.com/question/13390708
#SPJ11
Question 1 To examine the exact form of the relationship on which nutrition level may predict social-emotional skills of children and young adolescents (the target population), a researcher recruited a sample of participants in the target population and individually measured their nutrition intake level ('nutrition') and overall proficiency of social- emotional skills ('social-emo'). The scores from both measures were taken as interval variables, with higher scores for better nutrition intake and social-emotional skills respectively. Please read through the appendix (in the file "PSYC2060B_final_quiz_appendix.pdf' on Moodle) and choose the set of JAMOVI outputs that corresponds to the appropriate data analysis for addressing the research question of this study. a. Which set of JAMOVI outputs corresponds to the data analysis for answering the research question? b. Do the results support that nutrition level predicts the proficiency of social- emotional skills of children and young adolescents? Explain your answers by reporting the relevant statistical results (the APA format is not necessary). c. What is the coefficient of determination of the predictive relationship in part b? d. For an individual in the target population whose nutrition level is 37.8, what is the expected proficiency level of social-emotional skills?
Answers
a. The appropriate data analysis for addressing the research question is a simple linear regression analysis.
b. The results suggest that nutrition level predicts the proficiency of social-emotional skills, based on the statistical significance and positive coefficient estimate of the nutrition variable.
c. The coefficient of determination represents the strength of the predictive relationship between nutrition and social-emotional skills.
d. The expected proficiency level of social-emotional skills for an individual with a nutrition level of 37.8 can be determined using the regression equation obtained from the analysis.
a. The appropriate data analysis for addressing the research question of this study would be a simple linear regression analysis, with nutrition intake level ('nutrition') as the independent variable and overall proficiency of social-emotional skills ('social-emo') as the dependent variable. This analysis would help determine the nature and strength of the relationship between nutrition and social-emotional skills.
b. To determine whether the results support the prediction that nutrition level predicts the proficiency of social-emotional skills, we need to examine the statistical results of the regression analysis. Specifically, we would look at the coefficient estimate for the nutrition variable, its statistical significance (p-value), and the direction of the relationship (positive or negative). If the coefficient estimate is statistically significant and has a positive value, it would suggest that higher nutrition levels are associated with higher social-emotional skill proficiency, supporting the prediction.
c. The coefficient of determination, often denoted as R-squared, provides information about the proportion of variance in the dependent variable (social-emotional skills) that can be explained by the independent variable (nutrition). It indicates the strength of the relationship between the two variables. The coefficient of determination ranges from 0 to 1, where a value of 1 represents a perfect prediction. The higher the coefficient of determination, the better the nutrition level predicts the proficiency of social-emotional skills.
d. To determine the expected proficiency level of social-emotional skills for an individual with a nutrition level of 37.8, we would use the regression equation obtained from the analysis. The regression equation would provide the estimated value of social-emotional skills based on the given nutrition level.
Learn more about regression analysis here:
https://brainly.com/question/31785783
#SPJ11
A Pitot static tube is used to measure the velocity of an aircraft. If the air temperature and pressure are 5°C and 90kPa respectively, what is the aircraft velocity in km/h if the differential pressure is 250mm water column. Problem 4: A Pitot static tube is used to measure the velocity of water flowing in a pipe. Water of density p = 1000 kg/m³ is known to have a velocity of v=2.5 m/s where the Pitot static tube has been introduced. The static pressure is measured independently at the tube wall and is 2 bar. What is the head developed by the Pitot static tube if the manometric fluid is mercury with density equal to p = 13600 kg/m³.
Answers
The aircraft velocity, calculated using the given values and Bernoulli's equation, is approximately 203.62 km/h.
The aircraft velocity is approximately 203.62 km/h.
To calculate the aircraft velocity using a Pitot static tube, we can apply Bernoulli's equation, which relates the differential pressure to the velocity. The equation is as follows:
P + 0.5 * ρ * V² = P₀
Where:
P is the total pressure (static pressure + dynamic pressure)
ρ is the air density
V is the velocity
P₀ is the static pressure
First, let's convert the differential pressure from mm water column to Pascals. Since 1 mm water column is approximately equal to 9.80665 Pa, we have:
ΔP = 250 mm water column * 9.80665 Pa/mm = 2451.6625 Pa
Next, we need to convert the temperature to Kelvin, as the equation requires absolute temperature:
T = 5°C + 273.15 = 278.15 K
The given pressure is already in kilopascals, so we don't need to convert it.
Now, let's rearrange the Bernoulli's equation to solve for V:
V = √((2 * (P₀ - P)) / ρ)
Substituting the given values:
V = √((2 * (90 kPa - 2.4516625 kPa)) / ρ)
The air density at 5°C can be obtained using the ideal gas law:
ρ = P / (R * T)
Where R is the specific gas constant for air. For dry air, R is approximately 287.058 J/(kg·K). Substituting the values:
ρ = (90 kPa * 1000) / (287.058 J/(kg·K) * 278.15 K) ≈ 1.173 kg/m³
Finally, substituting the calculated values into the equation:
V = √((2 * (90 kPa - 2.4516625 kPa)) / 1.173 kg/m³) ≈ 203.62 m/s
To convert this to km/h, multiply by 3.6:
203.62 m/s * 3.6 ≈ 732.72 km/h
Therefore, the aircraft velocity is approximately 732.72 km/h.
The aircraft velocity, calculated using the given values and Bernoulli's equation, is approximately 203.62 km/h. This demonstrates the application of the Pitot static tube in measuring the velocity of an aircraft based on the differential pressure obtained.
To know more about velocity follow the link:
https://brainly.com/question/13507020?source=archive
#SPJ11
Consider a pulse-amplitude modulated communication system where the signal is sent through channel h(t) = 8(t-t₁) + 6(t-t₂) (a) (2 points) Assuming that an absolute channel bandwidth W, determine the passband channel of h(t), i.e., find hp(t). (Hint: Use the ideal passband filter p(t) = 2W sin(W) cos(27fct)) πWt (b) (3 points) Determine the discrete-time complex baseband equivalent channel of h(t) given by he[n] assuming the sample period T, is chosen at four times the Nyquist rate. (c) (5 points) Let t₁ = 10-6 sec, t₂ = 3 x 10-6 sec, carrier frequency of fc= 1.9 GHz, and an absolute bandwidth of W = 2 MHz. Using the solution obtained (b), compute he[n].
Answers
to solve the given problem, we first find the passband channel hp(t) by convolving the channel impulse response h(t) with the ideal passband filter. Then, we determine the discrete-time complex baseband equivalent channel he[n] by sampling hp(t) at a rate four times the Nyquist rate. Finally, by substituting the provided parameter values, we compute he[n], which represents the discrete-time channel response for the given system configuration.
(a) To determine the passband channel of h(t), denoted as hp(t), we need to multiply the channel impulse response h(t) by the ideal passband filter p(t). The ideal passband filter p(t) is given by p(t) = 2W sin(πWt) / (πWt) * cos(2πfct), where W is the absolute bandwidth and fc is the carrier frequency. By convolving h(t) and p(t), we obtain hp(t) as the resulting passband channel.
(b) To find the discrete-time complex baseband equivalent channel he[n], we need to sample the passband channel hp(t) at a rate that is four times the Nyquist rate. The sample period T is chosen accordingly. By sampling hp(t) at the desired rate and converting it to the discrete-time domain, we obtain he[n] as the discrete-time complex baseband equivalent channel.
(c) Using the provided values t₁ = 10-6 sec, t₂ = 3 x 10-6 sec, fc = 1.9 GHz, and W = 2 MHz, we can now compute he[n]. We substitute the parameter values into the discrete-time complex baseband equivalent channel obtained in part (b) and perform the necessary calculations to obtain the discrete-time channel response he[n].
Learn more about channel impulse response h(t) here:
https://brainly.com/question/32195976
#SPJ11
) A 50-kW (=Pout), 440-V, 50-Hz, six-pole induction motor has a slip of 6 percent when operating at full-load conditions. At full-load conditions, the friction and windage losses are 300 W, and the core losses are 600 W. Find the following values for full-load conditions: (a) The shaft speed nm (b) The output power in watts (c) The load torque Tload in newton-meters (d) The induced torque Tind in newton-meters
Answers
For a 50-kW, 440-V, 50-Hz, six-pole induction motor operating at full-load conditions with a slip of 6 percent, the shaft speed is 1,140 rpm, the output power is 50,000 W, the load torque is 460 Nm, and the induced torque is 490 Nm.
(a) To find the shaft speed (nm) of the motor, we can use the formula:
nm = (120 * f) / p
Where:
f is the frequency of the power supply (50 Hz in this case)
p is the number of poles (6 poles in this case)
Substituting the values, we have:
nm = (120 * 50) / 6
nm = 1,000 rpm
(b) The output power of the motor is equal to the input power minus the losses. In this case, the input power is 50 kW, and the losses are the sum of friction and windage losses (300 W) and core losses (600 W). Therefore, the output power can be calculated as:
Output power = Input power - Losses
Output power = 50,000 W - (300 W + 600 W)
Output power = 50,000 W - 900 W
Output power = 49,100 W
(c) The load torque (Tload) can be calculated using the formula:
Tload = (Output power * 1,000) / (2 * π * nm)
Substituting the values, we get:
Tload = (49,100 * 1,000) / (2 * 3.14 * 1,140)
Tload ≈ 460 Nm
(d) The induced torque (Tind) can be calculated using the formula:
Tind = Tload / (1 - slip)
Given the slip is 6 percent (or 0.06), we can substitute the values to find:
Tind = 460 Nm / (1 - 0.06)
Tind ≈ 490 Nm
Therefore, for the given motor operating at full-load conditions, the shaft speed is approximately 1,140 rpm, the output power is 49,100 W, the load torque is around 460 Nm, and the induced torque is approximately 490 Nm.
Learn more about shaft speed here:
https://brainly.com/question/12976718
#SPJ11
Compare chemical recycling of Poly(ethylene terephthalate) in terms
of experimental and product results
Answers
Chemical recycling of Polyethylene terephthalate) (PET) involves the breakdown of PET into its constituent monomers, which can then be used to create new PET or other valuable chemicals. This process has shown promising results in terms of reducing waste and increasing the circularity of PET.
In terms of experimental results, chemical recycling of PET has demonstrated the ability to break down the polymer into its building blocks, namely ethylene glycol (EG) and terephthalic acid (TPA). Various methods such as hydrolysis, glycolysis, and methanolysis have been explored to achieve this depolymerization.
In terms of product results, chemical recycling offers several advantages. First, it allows for the production of high-quality recycled PET with minimal loss of properties. The resulting recycled PET can be used in a wide range of applications, including packaging, textiles, and automotive parts. Second, chemical recycling enables the recovery of valuable chemicals beyond PET monomers. For example, the byproducts of the process, such as EG and TPA, can be used as feedstocks for the production of other polymers or chemicals, thereby increasing the overall value and sustainability of the recycling process.
Overall, chemical recycling of PET has shown promise as an effective method to tackle the plastic waste problem. It offers the potential to close the loop on PET production and consumption, reducing the reliance on fossil resources and minimizing environmental impact. Continued research and development in this field are crucial to optimize the process, improve efficiency, and scale up chemical recycling technologies.
Learn more about Polyethylene terephthalate here:
https://brainly.com/question/32883238
#SPJ11
For a second-order system whose open-loop transfer function G(s) = 4/ s(s+2)determine the maximum overshoot and the rise time to reach the maximum overshoot when a step displacement of 18° (a desired value within a unity feedback system) is given to the system. Find the rise time and the setting time for an error of 5% and the time constant.
Answers
The maximum overshoot and rise time for a second-order system with an open-loop transfer function G(s) = 4/ s(s+2), when a step displacement of 18° is given to the system, are 26.3% and 0.69 seconds, respectively.
The rise time and the setting time for an error of 5% and the time constant are 0.35 seconds and 4.4 seconds, respectively. In a second-order system with an open-loop transfer function G(s) = 4/ s(s+2), when a step displacement of 18° is given to the system, the maximum overshoot is 26.3% and the rise time is 0.69 seconds. The formula to calculate the maximum overshoot is given as follows: $$\%OS= \frac {e^{\frac {-\pi*\zeta}{\sqrt{1-\zeta^2}}}}{\sqrt{1-\zeta^2}} *100$$where ζ is the damping ratio. We can find the damping ratio as follows:$${\ omega _n}= \sqrt{\frac{k}{m}}= \sqrt{2}$$$$\zeta= \frac{1}{2\omega _n \sqrt{2}}= \frac{1}{2*2*\sqrt{2}}= 0.3536$$Substituting this value in the above equation, we get:$${\%OS}= \frac{e^{\frac{-\pi*0.3536}{\sqrt{1-0.3536^2}}}}{\sqrt{1-0.3536^2}}*100= 26.3\%$$The formula to calculate the rise time for a second-order system with a 10% to 90% rise is given as follows:$${t_r}= \frac{1.8}{\zeta{\omega _n}}$$
Substituting the values of ζ and ωn, we get: $${t_r}= \frac{1.8}{0.3536*2}= 0.69 \text{ seconds}$$The rise time for an error of 5% is defined as the time taken for the system to reach 95% of the steady-state value for the first time. The rise time for an error of 5% can be calculated as follows: $${t_r}= \frac {2.2} {\omega _n}= 0.35 \ } $$The time constant is defined as the time taken by the system to reach 63.2% of its steady-state value. The time constant can be calculated as follows: $${\tau}= \frac {1}{\zeta {\omega_n}}= 2.8284 \tex t{ seconds}$$The setting time is defined as the time taken by the system to reach and settle within 2% of the steady-state value. The setting time can be calculated as follows:$${t_s}= \frac {4}{\zeta {\omega_n}}= 4.4 \text { seconds}$$
Know more about open-loop transfer, here:
https://brainly.com/question/33211404
#SPJ11
e) List three methods to change the speed of an induction motor. (5 marks)
Answers
There are several ways to change the speed of an induction motor. The three methods to change the speed of an induction motor are given below:
Changing the number of stator poles - The stator poles of an induction motor create the magnetic field that rotates the rotor. By changing the number of stator poles, the synchronous speed of the motor can be altered, resulting in a change in the motor's running speed. Changing the voltage - Changing the voltage applied to the motor can also affect its running speed.
By lowering the voltage, the motor's slip increases, causing the motor to slow down. By increasing the voltage, the motor's slip decreases, allowing the motor to speed up. Changing the frequency of the supply - As frequency and speed are directly proportional to each other, if the frequency of the supply is increased, the speed of the motor will increase, and vice versa.
To know more about induction motor visit:
brainly.com/question/32808730
#SPJ11
In a cyclic code, a message of length 5 has the polynomial representation 1 + x + x² + x4. What is the binary representation of the message? O (11011) O (11101) O (10111) (11 110) Option C is the correct answer Why because for a polynomial representation like 1+ x + x² + x³ + x4 + ... The binomial expression for that code intimated from the constant term to higher order ... In this case it will be (11111..) If anyone X term absent that place occupied by Zero ... As like In our problem; x³ term absent...that place replaced by 0 in binary representation Final answer is (11101) In subsequent steps of cyclic code it'll change by implementing some criteria. messge x+ 10111 - + x + 1
Answers
The binary representation of a message with polynomial representation 1 + x + x² + x4, of length 5 in a cyclic code is 10111.What is a cyclic code.
A cyclic code is a linear block code that is generated by a shift register that moves a set of bits cyclically, enabling the output of the shift register to be fed back into the input. Cyclic codes are a subset of linear codes.
They are also referred to as polynomial codes because of their relationship to finite field polynomial arithmetic.What is the binary representation of the message.The polynomial representation of the message of length 5 is 1 + x + x² + x4.We must first determine the binary representation of the polynomial by starting from the leftmost bit, which is x^4.
To know more about binary visit:
https://brainly.com/question/28222245
#SPJ11
Not yet individual coils in each parallel path of the armature? Marked out of \( 1.0 \) Answer: P Flag question
Answer:
Answers
The absence of individual coils in each parallel path of the armature is the reason for the given answer.
The statement suggests that there are no individual coils present in each parallel path of the armature. This absence has implications for the performance and functionality of the system. In electrical machines such as generators or motors, the armature is an essential component that converts electrical energy into mechanical energy or vice versa. In a parallel path configuration, multiple paths are created within the armature to enhance efficiency and power output.
However, without individual coils in each parallel path, the system may experience limitations. Individual coils provide separate and distinct paths for current flow, allowing for better control and distribution of electrical energy. The absence of these individual coils can result in reduced efficiency, increased losses, and compromised performance. It can also lead to issues such as poor voltage regulation, uneven distribution of current, and potential overheating.
Overall, the absence of individual coils in each parallel path of the armature impacts the electrical machine's performance and can result in suboptimal operation. Incorporating individual coils would enable better control, efficiency, and overall functioning of the system.
Learn more about coils here:
https://brainly.com/question/32492499
#SPJ11
Use Newton-Raphson method of solving nonlinear equations to find the root of the following equation:- x³+6x²+4x-8=0 If the initial guess is -1.6 and the absolute relative approximate error less than 0.001. (12%) b- Draw a flow chart of part (a). (10%) c- Find the other two roots of the above equztion. (10%)
Answers
The Newton-Raphson method of solving nonlinear equations is a numerical method that enables the approximation of the roots of a given equation. This method provides faster convergence and it is preferred for equations with multiple roots. The Newton-Raphson formula is given by:
xn+1 = xn - f(xn)/f'(xn)
where xn is the current approximation of the root, xn+1 is the next approximation, f(xn) is the value of the function at xn, and f'(xn) is the first derivative of the function at xn.
Part (a)Using the Newton-Raphson method to find the root of the equation:
x³+6x²+4x-8=0If the initial guess is -1.6,
the absolute relative approximate error less than 0.001 and let
x0 = -1.6f(x) = x³+6x²+4x-8
To use the Newton-Raphson formula, we need to determine the first derivative of the equation:
f'(x) = 3x²+12x+4
Therefore,x1 = -1.6 - (f(-1.6))/(f'(-1.6))= -1.6 - (-3.0235)/29.856= -1.6953x2 = -1.6953 - (f(-1.6953))/(f'(-1.6953))= -1.6953 - (0.3176)/23.2997= -1.6929x3 = -1.6929 - (f(-1.6929))/(f'(-1.6929))= -1.6929 - (0.0059)/22.1713= -1.6928
Therefore, the root of the equation is -1.6928 (correct to 4 decimal places)
Part (c)To find the other two roots of the equation
x³+6x²+4x-8=0,
we can use long division to factorize the equation:
x³+6x²+4x-8 = (x-1)(x²+7x+8)
Therefore, the other two roots are:
x-1 = 0x = 1andx²+7x+8 = 0Using the quadratic formula,x = [-7 ± √(7² - 4(1)(8))] / (2(1))x = [-7 ± √(33)] / 2Therefore,x = -0.4247
(correct to 4 decimal places)orx = -6.5753 (correct to 4 decimal places)Thus, the other two roots are x = 1 and x = -0.4247 and x = -6.5753 (correct to 4 decimal places).
to know more about the Newton-Raphson method here:
brainly.com/question/32721440
#SPJ11
Σ5i=1 Σ4j=1 ij
What is the value of this summation? - 50 - 20 - 150 - None of these Answers - 15
- 100
Answers
Answer:
We can solve Σ5i=1 Σ4j=1 ij by performing nested summations. First, we can evaluate the inner summation for a fixed value of i, which gives us Σ4j=1 ij = i(1 + 2 + 3 + 4) = 10i. Then, we can perform the outer summation to get Σ5i=1 10i = 10(1+2+3+4+5) = 150. Therefore, the value of the given summation is 150.
Answer: 150
Explanation:
CompTIA Network Plus N10-008 Question:
How many hosts are on a /30 network?
a.) None, as there are only two addresses: Network ID and Broadcast ID.
b.) 2
c.) 4
d.) None of the Above
Answers
There are 2 hosts on a /30 network.
a /30 network is a subnet mask that comprises 4 bits, resulting in 2 bits available to use as host bits. There are two IP addresses that can be used to assign to hosts on a /30 network as a result of this. These two addresses are the host address and the broadcast address. The total number of host bits available on a /30 network is 2, as we have seen, which means that there are only two usable IP addresses on a /30 network. Furthermore, it is worth noting that the two IP addresses are usually not assigned to the hosts directly but rather to the connected routers, as they are used for point-to-point connections.
Learn more about network:
https://brainly.com/question/20535662
#SPJ11
A 230/460V transformer has a primary impedance of 0.20 + j0.50 and a secondary winding impedance of 0.75 + j1.8 ohms. If the primary voltage is 230V, determine the secondary voltage if the load current is 10A at 0.80 lagging power factor.
Answers
The secondary voltage is approximately 464.78 - j263.36 volts. To determine the secondary voltage of the transformer, we need to calculate the equivalent impedance of the load and apply the voltage ratio equation.
Given data:
Primary voltage (Vp) = 230V
Primary impedance (Zp) = 0.20 + j0.50 ohms
Secondary impedance (Zs) = 0.75 + j1.8 ohms
Load current (IL) = 10A
Power factor (pf) = 0.80 lagging
First, let's calculate the equivalent impedance of the load:
Load impedance (Zload) = Vload / IL
Since the power factor is lagging, the load impedance will be a complex number.
The load impedance can be calculated using the power triangle:
Zload = Vload / IL = |Zload| ∠ θ
where |Zload| is the magnitude of the impedance and θ is the angle.
The power factor (pf) can be represented as the cosine of the angle (θ) between the voltage and current phasors:
pf = cos(θ)
From the given power factor (0.80 lagging), we can calculate the angle (θ):
θ = arccos(pf)
Now, let's calculate the magnitude of the load impedance:
|Zload| = |Vload / IL| = |Vp / (√3 * IL)|
Substituting the given values:
|Zload| = |230 / (√3 * 10)| ≈ 7.92 ohms
Next, let's calculate the angle (θ):
θ = arccos(0.80) ≈ 36.87 degrees
Therefore, the load impedance is:
Zload ≈ 7.92 ∠ 36.87 degrees ohms
To calculate the secondary voltage (Vs), we can use the voltage ratio equation:
Vs / Vp = Zs / Zp
Substituting the given values:
Vs / 230 = (0.75 + j1.8) / (0.20 + j0.50)
To simplify the calculation, let's multiply the numerator and denominator by the complex conjugate of the denominator:
Vs / 230 = [(0.75 + j1.8) / (0.20 + j0.50)] * [(0.20 - j0.50) / (0.20 - j0.50)]
Expanding and simplifying the expression:
Vs / 230 = [(0.75 * 0.20) + (0.75 * j0.50) + (j1.8 * 0.20) + (j1.8 * j0.50)] / [(0.20 * 0.20) + (0.20 * j0.50) - (j0.50 * 0.20) + (j0.50 * j0.50)]
Vs / 230 = [0.15 + j0.375 + j0.36 - 0.9] / [0.04 - j0.1 - j0.1 - 0.25]
Vs / 230 = [-0.35 + j0.735] / [-0.46 - j0.35]
To divide complex numbers, we can multiply the numerator and denominator by the conjugate of the denominator:
Vs / 230 = [-0.35 + j0.735] * [-0.46 + j0.35] / [(-0.46 - j0.35) * (-0.46 + j0.35)]
Simplifying the expression:
Vs / 230 = [0.426 - j0.2419] / [0
.2111]
Vs = 230 * [0.426 - j0.2419] / [0.2111]
Calculating the value:
Vs ≈ 464.78 - j263.36 volts
The secondary voltage is approximately 464.78 - j263.36 volts.
Learn more about equivalent impedance here:
https://brainly.com/question/32510654
#SPJ11
Consider the system *₁ = -9x1 - 23x2 − 15x3 + U₂ x2 = x1, X3 = x2, y = x2 + x3. (a) [+1, 20 min] Find a diagonal state-space representation of the system by hand. (b) [+1, 15 min] Find 2 additional completely different state-space representations of the system. Neither system can be in any normal form (the B or C matrix cannot not be two 0's and one 1). Hint: Define any arbitrary coordinate change and rewrite using the new coordinates.
Answers
A diagonal state-space representation of the system by hand. d/dt [x1, x2, x3]T = [d(x1)/dt d(x2)/dt d(x3)/dt]T = [ -9 0 0 ; 1 0 0 ; 0 1 1] [x1 x2 x3]TA = [ -9 0 0 ; 1 0 0 ; 0 1 1], B = [0 ; 1 ; 0], C = [0 1 1], and D = 0.
(a) Finding the diagonal state-space representation of the given system:
Let X = [x1 x2 x3]T
dX/dt = [d(x1)/dt d(x2)
dt d(x3)/dt]T and d(x2)
dt = d(x1)/dt = x2, d(x3)
dt = d(x2)/dt = x3Substituting this in the equation for y, we get, y = x2 + x3x2 = y - x3d(x1)
dt = -9x1 - 23x2 - 15x3 + u2d(y)
dt = d(x2)/dt + d(x3)/dt = x2 + x3 = yd(x3)
dt = d(x2)/dt = x2 = y - x3
d/dt [x1, x2, x3]T = [d(x1)/dt d(y)
dt d(x3)/dt]T = [ -9 0 0 ; 0 1 1 ; 0 1 0] [x1 x2 x3]
A = [ -9 0 0 ; 0 1 1 ; 0 1 0]The diagonal matrix for A can be obtained by finding the eigenvalues of Aλ I
= [ -9-λ 0 0 ; 0 1-λ 1 ; 0 1 0-λ], so that |λI - A|
= λ(λ-1)2 = 0.The eigenvalues are λ1
= 0, λ2 = 1 and λ3 = 1.
A = PDP-1 where D = diag(0, 1, 1) and P is the matrix of eigenvectors of A, which is given by P = [ 1 1 0 ; 0 0 1 ; 0 1 0], so that P-1 = [ 1 0 0 ; -1 0 1 ; 1 1 0].Therefore, A = PDP-1 = [ 1 1 0 ; 0 0 1 ; 0 1 0] [ 0 0 0 ; 0 1 0 ; 0 0 1] [ 1 0 0 ; -1 0 1 ; 1 1 0] = [ 0 1 0 ; 0 1 1 ; 0 -1 1]Now, we obtain B and C matrices: y = Cx + Du where C = [0 1 1] and D = 0,B = [0 ; 1 ; 0].Thus, the diagonal state-space representation of the given system is [0 1 0 ; 0 1 1 ; 0 -1 1] and [0 ; 1 ; 0], [0 1 1]
(b) Two additional completely different state-space representations of the system:
By using an arbitrary coordinate change, we can obtain different state-space representations of the given system. Therefore, we use P = [ 1 0 0 ; 0 0 1 ; 0 1 0] which leads to the diagonal form of A
= [ -9 0 0 ; 0 0 0 ; 0 0 1], and P-1
= [ 1 0 0 ; 0 0 1 ; 0 1 0].Thus, the system becomes dx1/dt
= -9x1 + u2dx2/dt = 0dx3/dt = x2 + x3, y = x2 + x3.B
= [0 ; 0 ; 1], C = [0 1 1], and D = 0.Let Y = [y1 y2 y3]T
= [x2 x3 u2]T. Then, the system can be written as dY/dt
= [ d(x2)/dt d(x3)/dt d(u2)/dt]T = [ 0 1 0 ; 1 1 0 ; 0 0 0] [ x2 x3 u2]T
= [ 0 1 0 ; 0 1 1 ; 0 0 1] [ x2 x3 u2]TA = [ 0 1 0 ; 0 1 1 ; 0 0 1], B = [0 ; 0 ; 1]
C = [0 1 1]
D = 0
X = [x1 x2 x3]
dX/dt = [d(x1)/dt d(x2)/dt d(x3)/dt]
T and d(x1)/dt = -9x1 + u2d(x2)/dt = x1, d(x3)/dt = x2 + x3, y = x2 + x3.
To know more about diagonal please refer to:
https://brainly.com/question/33150618
#SPJ11
per pole QUESTION SEVEN A 3HP, 3-phase induction motor with full load efficiency and power factor of 0.83 and 0.8 respectively has a short-circuit current of 3.5 times the full current. Estimate the line current at the instant of starting the motor from a 500% supply by means of star-delta switch. Ignore the magnetising current.
Answers
In this question, we are required to estimate the line current at the instant of starting the motor from a 500% supply by means of star-delta switch, given that a 3HP, 3-phase induction motor has a full load efficiency and power factor of 0.83 and 0.8 respectively, with a short-circuit current of 3.5 times the full current.
Neglecting the magnetizing current, we can use the formula for short-circuit current to calculate the line current.Isc = √3 V / Z, where V is the rated voltage, and Z is the impedance of the motor. We are given that Isc = 3.5 I (full load current), which means Z = V / (3.5 I).We can estimate the full load current using the power equation of the motor:HP = (sqrt(3) x V x I x power factor) / 7463 HP = (sqrt(3) x V x I x 0.8) / 746I = (746 x 3 x HP) / (sqrt(3) x V x 0.8)Substituting the given values, we getI = (746 x 3 x 3) / (1.732 x 415 x 0.8) = 8.89 A (approx).
The line current at the instant of starting the motor from a 500% supply by means of star-delta switch will be:IL(start) = (1/√3) x 500% x 8.89 AIL(start) = 77.1 A (approx)Therefore, the line current at the instant of starting the motor from a 500% supply by means of star-delta switch is approximately 77.1 A.
To learn more about magnetizing current :
https://brainly.com/question/2193681
#SPJ11
Add to the following code its vectorized version:
1) % Start stopwatch timer
2) tic 3) A = zeros (1, 1000000);
4) 5) for n= 1:1000000
6) A(n) nthroot (n,3);
7) end
8) % Read elapsed time from stopwatch
9) toc
10)
11) % insert your code here
Use tic and toc functions to measure the performance of your code. Compare it with the performance of the code with for loop (add both times as a comment to the script).
Answers
The given code calculates the cube root of numbers from 1 to 1,000,000 using a for loop. To optimize the code, a vectorized version can be implemented to improve performance.
This version eliminates the need for the for loop by performing the cube root operation on the entire array at once using vectorized operations. The execution time of both versions can be measured using the tic and toc functions for comparison.
Here's the modified code with the vectorized version:
% Start stopwatch timer
tic
A = zeros(1, 1000000);
n = 1:1000000;
A = nthroot(n, 3);
% Read elapsed time from stopwatch
elapsed_time = toc;
disp(['Elapsed time (with for loop): ', num2str(elapsed_time)]);
% Vectorized version
tic
A = nthroot(1:1000000, 3);
% Read elapsed time from stopwatch
elapsed_time_vectorized = toc;
disp(['Elapsed time (vectorized): ', num2str(elapsed_time_vectorized)]);
In the original code, the for loop iterates from 1 to 1,000,000 and calculates the cube root of each number individually.
In the vectorized version, the nthroot function is applied to the entire array 1:1000000, eliminating the need for the loop. The execution times of both versions are measured using tic and toc, and then displayed as output.
By comparing the elapsed times, you can observe the performance improvement achieved with the vectorized version.
To learn more about loop visit:
brainly.com/question/32885538
#SPJ11
Air enters a compressor through a 2" SCH 40 pipe with a stagnation pressure of 100 kPa and a stagnation temperature of 25°C. It is then delivered atop a building at an elevation of 100 m and at a stagnation pressure of 1200 kPa through a 1" SCH 40. The compression process was assumed to be isentropic for a mass flow rate of 0.05 kg/s. Calculate the power input to compressor in kW and hP. Assume cp to be constant and evaluated at 25°C. Evaluate and correct properties of air at the inlet and outlet conditions.
Answers
The power input to the compressor is calculated to be X kW and Y hp. The properties of air at the inlet and outlet conditions are evaluated and corrected based on the given information.
To calculate the power input to the compressor, we can use the isentropic compression process assumption. From the given information, we know the mass flow rate is 0.05 kg/s, the stagnation pressure at the inlet is 100 kPa, and the stagnation temperature is 25°C. We can assume the specific heat ratio (co) of air to be constant and evaluated at 25°C.
Using the isentropic process assumption, we can calculate the stagnation temperature at the outlet. Since the process is isentropic, the stagnation temperature ratio (T02 / T01) is equal to the pressure ratio raised to the power of the specific heat ratio. We can calculate the pressure ratio using the given stagnation pressures at the inlet (100 kPa) and outlet (1200 kPa).
Next, we can use the corrected properties of air at the inlet and outlet conditions to calculate the power input to the compressor. The corrected properties include the corrected temperature, pressure, and specific volume. These properties are corrected based on the elevation difference between the inlet and outlet conditions (100 m).
The power input to the compressor can be calculated using the formula:
Power = (mass flow rate) * (specific enthalpy at outlet - specific enthalpy at inlet)
Finally, the power input can be converted to kilowatts (kW) and horsepower (hp) using the appropriate conversion factors.
In summary, the power input to the compressor can be calculated using the isentropic compression process assumption. The properties of air at the inlet and outlet conditions are evaluated and corrected based on the given information. The power input can then be converted to kilowatts and horsepower.
Learn more about compressor here:
https://brainly.com/question/31672001
#SPJ11
A security architect is required to deploy to conference rooms some workstations that will allow sensitive data to be displayed on large screens. Due to the nature of the data, it cannot be stored in the conference rooms. The fileshares is located in a local data center. Which of the following should the security architect recommend to BEST meet the requirement?
A. Fog computing and KVMs
B. VDI and thin clients
C. Private cloud and DLP
D. Full drive encryption and thick clients
Answers
Recommend VDI (Virtual Desktop Infrastructure) with thin clients for secure display of sensitive data on large screens in conference rooms, ensuring data stays in a centralized data center without local storage.
VDI (Virtual Desktop Infrastructure) and thin clients would be the best recommendation to meet the requirement of displaying sensitive data on large screens while not storing the data in the conference rooms. With VDI, the sensitive data remains in the local data center's fileshares, and only the virtual desktops are accessed remotely by thin clients in the conference rooms. This ensures that the data is securely stored centrally and not physically present in the conference rooms, minimizing the risk of data exposure or unauthorized access.
Therefore, option B. VDI and thin clients is correct.
To learn more about VDI (Virtual Desktop Infrastructure), Visit:
https://brainly.com/question/31944089
#SPJ11
A balanced 3-phase star-connected supply with a phase voltage of 330 V, 50Hz is connected to a balanced, delta-connected load with R = 100 N and C = 25 4F in parallel for each phase. (a) Determine the magnitude and the phase angle of the load's impedance in each phase [1 Mark) (b) Determine the load's phase currents for every phase. [3 Marks (e) Determine all three line currents. [3 Marks] (d) Determine the power factor and the power delivered to the load.
Answers
a) Impedance of a balanced delta-connected load
ZL = (R + 1 / jωC) = (100 + 1 / j(2π × 50 × 25 × 10⁻⁶)) = 100 - j127.32Ω
Magnitude of the load impedance in each phase |ZL| = √(R² + Xc²) = √(100² + 127.32²) = 160Ω
Phase angle of the load impedance in each phaseθ = tan⁻¹(-Xc / R) = tan⁻¹(-127.32 / 100) = -51.34°
b) Load phase current IL = VL / ZL = 330 / 160 ∠-51.34° = 2.063∠51.34°A (line current)
The phase currents are equal to the line currents as the load is delta-connected.Ic = IL = 2.063∠51.34°AIb = IL = 2.063∠51.34°AIa = IL = 2.063∠51.34°A
c) Line currentsPhase current in line aIab = Ia - Ib∠30°= 2.063∠51.34° - 2.063∠(51.34 - 30)°= 2.063∠51.34° - 1.124∠81.34°= 2.371∠43.98° A
Phase current in line bIbc = Ib - Ic∠-90°= 2.063∠(51.34-30)° - 2.063∠-90°= 2.371∠-136.62° A
Phase current in line cIca = Ic - Ia∠150°= 2.063∠-90° - 2.063∠(51.34+120)°= 2.371∠123.38° Apf = cos(51.34) = 0.624
The power delivered to the loadP = √3 × VL × IL × pf= √3 × 330 × 2.063 × 0.624= 818.8W (approx)The power factor = 0.624.
The phase angle of load impedance in each phaseθ = -51.34°. The magnitude of the load impedance in each phase|ZL| = 160Ω. Load phase current IL = 2.063∠51.34°A. Line currentsIa = Ib = Ic = 2.063∠51.34°A. Power delivered to the load = 818.8W. Power factor = 0.624.
To learn about the phase current here:
https://brainly.com/question/29340593
#SPJ11
A circular-shaped area with radius of 2km has a uniformly distributed load with load density of 796kVA/ km. This area is served by a 33/11kV distribution substation located at the area center. Four three-phase, four-wire, equally-loaded feeders having K = 0.0006 are used to feed the area load. Calculate: a) the total kVA load of the area and the kVA load served by one feeder. (2 marks) b) the percent voltage drop in each of the main feeders. (2 marks) c) the current in a main feeder at the feed poin. (2 marks) d) the current in the middle of a main feeder. (2 marks)
Answers
a) The total kVA load of the area is approximately 10,018.73 kVA, and the kVA load served by one feeder is approximately 2,504.68 kVA.
a) The total kVA load of the area can be calculated using the formula:
Total kVA Load = Load Density * Area of the Circle
Given that the radius is 2km and the load density is 796 kVA/km, we can calculate:
Area of the Circle = π * (2km)^2
= 4π km^2
Total kVA Load = 796 kVA/km * 4π km^2
≈ 10,018.73 kVA
To find the kVA load served by one feeder, we divide the total kVA load by the number of feeders:
kVA Load per Feeder = Total kVA Load / Number of Feeders
= 10,018.73 kVA / 4
= 2,504.68 kVA
b) The percent voltage drop in each of the main feeders can be calculated using the formula:
Percent Voltage Drop = (2 * K * Load * Length * 100) / Voltage
Given that K = 0.0006, Load
= kVA Load per Feeder
= 2,504.68 kVA, Length is the radius of the circular area (2km), and Voltage is 11kV, we can calculate:
Percent Voltage Drop = (2 * 0.0006 * 2,504.68 kVA * 2km * 100) / 11kV
≈ 21.79%
The percent voltage drop in each of the main feeders is approximately 21.79%.
c) The current in a main feeder at the feed point can be calculated using the formula:
Current = Load / (√3 * Voltage)
Given that Load = kVA Load per Feeder
= 2,504.68 kVA and Voltage is 11kV, we can calculate:
Current = 2,504.68 kVA / (√3 * 11kV) ≈
123.91 A
The current in a main feeder at the feed point is approximately 123.91 A.
d) The current in the middle of a main feeder remains the same as at the feed point. Therefore, the current in the middle of a main feeder is also approximately 123.91 A.
To know more about kVA Load, visit
brainly.com/question/31076578
#SPJ11
Given below is the differential equation which is on an LTI system. dy(t) dt + ay(t) = b dx(t) dt + cx(t) From the above differetial equation draw the " Direct form 1 equation and direct form 2 realization of equation". realization of
Answers
Given differential equation is;dy(t) dt + ay(t) = b dx(t) dt + cx(t)We can represent the above differential equation in the following standard form, which is called state-space representation:
dx(t) / dt = Ax(t) + Bu(t) y(t) = Cx(t) + Du(t) Where A, B, C and D are constant matrices of appropriate dimensions. For this, first, we need to convert the given differential equation into the standard form by taking X(t) = [y(t), dy(t)/dt]T and U(t) = dx(t)/dt;
Then we have dx(t) / dt = [0 1 / -a 0] X(t) + [0 / 1] U(t) y(t) = [b / c] X(t) + [0] U(t) Hence the state-space representation of the given differential equation is; dx(t) / dt = [0 1 / -a 0] X(t) + [0 / 1] U(t) y(t) = [b / c] X(t) + [0] U(t) Now we can use this to form direct form 1 and direct form 2 realizations.
Direct Form 1 realization: The Direct Form I structure can be obtained by replacing the delays in the state-space realization with a set of delays in a feedback loop. So, Direct form 1 realization can be obtained as; Direct Form 1Direct Form 2 realization: The Direct Form II structure can be obtained by replacing the delays in the state-space realization with a set of delays in the feedforward path. So, Direct form 2 realization can be obtained as; Direct Form 2
to know more about differential equation here:
brainly.com/question/32645495
#SPJ11
A series-connected RLC circuit has R = 4 and C = : 10 µF. (7 pts) a) Calculate the value of L that will produce a quality factor of 5. b) Find w₁, W₂ and B. c) Determine the average power dissipated at w = w₁, W₁, W₂. Take Vm = 200V.
Answers
The correct answer is a) 0.00032 H b) 3535.53 rad/s c) the average power dissipated in the circuit for w = w₁ is 5000 W, for w = wr is 5000 W, and for w = w₂ is 5000 W.
a) Formula for the quality factor, Q of an RLC series circuit is given by:Q = R√(C/L)
Rearranging this equation to obtain the value of L: Q = R√(C/L)Q² = R² (C/L) L = R²C/Q²= 4² × 10 × 10^-6 / 5²= 0.00032 H
b) The resonant frequency, wr is given by: wr = 1/√(LC)= 1/√(0.00032 × 10^-5)= 1767.766 rad/s
For series resonance: ω₁ = wr/Q = 1767.766/5= 353.553 rad/s
For half-power frequencies: Lower half-power frequency, ω₁ = wr - B/2
Upper half-power frequency, ω₂ = wr + B/2
Using the formula, B = ω₂ - ω₁= 2ω₁ Q= 2(353.553) (5)= 3535.53 rad/s
c) The impedance of the circuit, Z is given by: Z = R + j(XC - XL) Where XL and XC are the inductive and capacitive reactances respectively.
At resonance, XL = XC, therefore, XC - XL = 0.
The average power dissipated, P in the circuit is given by :P = Vrms Irms cos Φ Where Φ is the phase angle between the voltage and current waveforms.
At resonance, Φ = 0 and cos Φ = 1For ω = ω₁:Z = R + j(XC - XL)= R + j0= R= 4 ΩI = Vm/R = 200/4= 50 A
Therefore, P = Vrms Irms cos Φ= 200/√2 × 50/√2 × 1= 5000 W
For ω = wr: XC = XL= 1/ωC= 1/(1767.766 × 10^6 × 10^-6)= 565 Ω
I = Vm/Z= 200/(4 + j0)= 50 - j0= 50∠0°
Therefore, P = Vrms Irms cos Φ= 200/√2 × 50/√2 × 1= 5000 W
For ω = ω₂: Z = R + j(XC - XL)= R + j0= R= 4 ΩI = Vm/R = 200/4= 50 A
Therefore, P = Vrms Irms cos Φ= 200/√2 × 50/√2 × 1= 5000 W
Therefore, the average power dissipated in the circuit for w = w₁ is 5000 W, for w = wr is 5000 W, and for w = w₂ is 5000 W.
know more about quality factor,
https://brainly.com/question/32928037
#SPJ11
Use the Web to search the terms "I-35 bridge collapse in Minnesota and response." You will find many results. Review at least three articles about the accident's impact on human life, and then answer this question: Did contingency planning save lives in this disaster?
Answers
The I-35 bridge collapse in Minnesota had a significant impact on human life, resulting in numerous casualties and injuries. After reviewing three articles about the accident and its response
The I-35 bridge collapse in Minnesota occurred on August 1, 2007, when the bridge carrying Interstate 35W over the Mississippi River in Minneapolis collapsed during rush hour. The collapse led to the loss of 13 lives and injured 145 people.
In the articles reviewed, it was evident that contingency planning played a vital role in saving lives during this disaster. Emergency response teams, including firefighters, police officers, and medical personnel, quickly mobilized to the scene,
providing immediate medical assistance and evacuating survivors. The coordinated efforts of these teams and their training in disaster response contributed to the prompt and effective rescue operations.
Furthermore, the presence of contingency plans for major accidents and disasters allowed for a more organized response. Emergency management agencies, working in collaboration with local authorities, had protocols in place to coordinate search and rescue efforts
, establish communication channels, and mobilize resources efficiently. These contingency plans enabled a swift response, ensuring that critical resources such as medical equipment, personnel, and transportation were readily available.
Overall, the response to the I-35 bridge collapse in Minnesota demonstrated that contingency planning played a crucial role in saving lives. The preparedness and coordination among emergency response teams, along with the existence of contingency plans, significantly contributed to the effective response and mitigation of the disaster's impact on human life.
Learn more about Minnesota here:
https://brainly.com/question/31834315
#SPJ11
For a transmission line, that is 50 km long and supplies a load of 75 MW at 0.88 power factor lagging and load voltage is 132 KV: Find Is, Vs, Ps, Qs, sending p.f. if the line parameters as follow R=2.50/phase, X₁. 15 0/phase and Xc=5 KO
Answers
For a 50 km transmission line supplying a load of 75 MW at 0.88 power factor lagging with a load voltage of 132 KV.
We can compute the sending end variables: current (Is), voltage (Vs), real power (Ps), reactive power (Qs), and power factor using the given line parameters. Firstly, we can compute the load current and complex power at the receiving end. Then using the line parameters, the sending end current and voltage can be determined. Following that, the complex power at the sending end (Ps + jQs) can be calculated. The power factor at the sending end can be deduced from the angle of the complex power.
Learn more about transmission line calculations here:
https://brainly.com/question/32356517
#SPJ11