Determine the number of moles (n) for 22.5 g of carbon dioxide with a molecular formula of CO₂​

Each face of the cube has an identical area, which is the same as a square whose side length is equal to the cube's edge length.

The cube's area on each face is given by its 1 meter-long edges as follows:

The cube's face area is equal to the product of its edge length and a square of one meter.

As a result, the cube's faces each have an area of 1 square meter.

Squaring the side's length yields the area of each face. To get the cube's total surface area, multiply the area of each face by the number of faces.

To know more about volume visit:-

brainly.com/question/11676583

#SPJ9

[tex] \: [/tex]

Option B, singing in a tiled shower, is most likely to produce a loud echo. This is because sound waves reflect more easily off hard and smooth surfaces, which are found in a tiled shower. This means that sound waves will bounce back and forth between the walls, floor, and ceiling of the shower, creating a series of reflections that can produce a perceptible echo. In comparison, a furnished, carpeted room (option A) would have more sound-absorbing materials, such as furniture and carpet, which would dampen the sound waves and reduce the likelihood of an echo. Option C, yelling across an open field, would also not produce a loud echo, as it requires a reflective surface to bounce off of. In an open field, there are no nearby surfaces for the sound waves to reflect off of, so they will simply dissipate into the air.

oxymercuration-demercuration of 2-methyl-2-butene gives the product 2-methyl-2-butanol.

Oxymercuration-demercuration is the process involving electrophilic activation of an alkene by a mercuric acetate group. It is followed by the  addition of water firstly and secondly, reductive demercuration by sodium borohydride.

In the first step, an electrophilic HgOAc+ ion is added to the double bond which gives a mercurinium ion .

In the second step, the species reacts with a nucleophilic water molecule. Due to this nucleophilic attack, there forms a bonding of an HgOAc group and a OH group on the adjacent carbon atoms.

The final product involves Markovnikov addition reaction where the OH group is bonded to the more substituted carbon atom of the alkene.

To know more about Oxymercuration-demercuration here

https://brainly.com/question/30829890

#SPJ4

Answer:

To make Kool-Aid ice cubes, you must be slightly below 0°C (32°F) to freeze the liquid into solid ice cubes. The freezing point of water is 0°C (32°F), but adding Kool-Aid powder to water lowers its freezing point. However, the exact freezing point would depend on the Kool-Aid mix's sugar content and other ingredients. In general, the more sugar and other additives in the Kool-Aid mix, the lower the freezing point of the liquid.

To determine the volume ratio of NH4Cl and NH3 solutions required to make a buffer of a specific pH, we need to use the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

where:

pH = the desired pH of the buffer

pKa = the dissociation constant of the weak acid component of the buffer

[A-] = the concentration of the conjugate base (NH3) of the weak acid in the buffer

[HA] = the concentration of the weak acid component (NH4Cl) in the buffer

The pKa of NH4Cl is 9.25, so we can use this value in the Henderson-Hasselbalch equation. Let's assume that we want to make a buffer with a pH of 9.0.

At the pH of 9.0, we can calculate the ratio of [A-]/[HA] using the following equation:

[A-]/[HA] = 10^(pH - pKa)

[A-]/[HA] = 10^(9.0 - 9.25) = 0.562

Therefore, we need to mix the NH4Cl and NH3 solutions in a ratio of 0.562:1 to make a buffer with a pH of 9.0. This means that for every 0.562 units of NH3, we need 1 unit of NH4Cl to make the buffer.

To know more about component click here

brainly.com/question/17547547

#SPJ4

The % acetic acid by mass in the vinegar sample is 5.14%.

The first step is to calculate the mass of the vinegar sample using its density:

Mass of vinegar = Volume of vinegar x Density of vinegar

Mass of vinegar = 5.00 ml x 1.00 g/ml = 5.00 g

Next, we can use the mass of acetic acid in the sample to calculate the percentage of acetic acid by mass:

% Acetic Acid = (Mass of acetic acid / Mass of vinegar) x 100%

% Acetic Acid = (0.2568 g / 5.00 g) x 100%

% Acetic Acid = 5.14%

To solve the problem, we first need to know the mass of the vinegar sample. We are given its volume and density, so we can use the density formula (density = mass / volume) to calculate the mass. Once we have the mass of the vinegar, we can use the mass of acetic acid in the sample (also given) to calculate the percentage of acetic acid by mass using the formula % Acetic Acid = (Mass of acetic acid / Mass of vinegar) x 100%.

This formula calculates the proportion of the mass of the sample that is due to acetic acid. Finally, we multiply the result by 100% to express the answer as a percentage. Therefore, the percentage of acetic acid by mass is 5.14%.

The complete question is

A 5.00 ml sample of vinegar contains 0.2568 g of acetic acid. if the density of vinegar is 1.00 g/ml, calculate the % acetic acid by mass.

To know more about the Acetic acid, here

https://brainly.com/question/9101960

#SPJ4

Answer:

19.56160744 g F2 = 19.6 grams F2

Explanation:

Molar mass of F2: 2(19.00)=38.00 g/mol

Atoms --avogadro's number--> moles --molar mass--> grams

Boyle's Law-

[tex]\:\:\:\:\:\:\:\:\:\:\:\star\:\sf \underline{ P_1 \: V_1=P_2 \: V_2}\\[/tex]

(Pressure is inversely proportional to the volume)

Where-

As per question, we are given that -

Now that we have all the required values and we are asked to find out the final volume, so we can put the values and solve for the final volume -

[tex]\:\:\:\:\:\:\:\:\:\:\:\:\:\:\:\star\:\sf \underline{ P_1 \: V_1=P_2 \: V_2}[/tex]

[tex]\:\:\:\: \:\:\:\:\:\:\longrightarrow \sf 30 \times 14.3= 54\times V_2\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\longrightarrow \sf V_2 = \dfrac{30 \times 14.3 }{54}\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\longrightarrow \sf V_2 = \cancel{\dfrac{ 429}{54}}\\[/tex]

[tex]\:\:\:\: \:\:\:\:\:\:\longrightarrow \sf V_2 =7.944..........\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\longrightarrow \sf \underline{V_2 = 7.94 \:L }\\[/tex]

Therefore, the volume will become 7.94 L when the pressure is increased to 54 atm.

Four different elements can form bonds with a carbon atom. So, HCCH equals CH. The triple bond is always the shortest bond length, followed by the double bond, and the single bond is the longest. HCCH (ethyne) compound has the shortest carbon-carbon bond length.

As bond order increases, bond length decreases. The distance separating the two nuclei that are joined together is known as the bond length. It varies according to hybridization, the quantity and kind of bonds, and the size of the atoms.

Since the length of a bond is inversely proportional to its strength, triple bonds, which are the strongest bonds, also have the shortest bond lengths. A triple bond length is shortened by the extra electrons' stronger attractive attractions on the nuclei. Bond lengths are listed in decreasing order: single bond ≥ double bond ≥ triple bond.

Learn more about Bond length, here:

https://brainly.com/question/24227967

#SPJ4

The correct order is: Fr 1, Ba 2, In 3, Sn 4, Se 5

To arrange the following elements in order of increasing metallic character (1 = most, 6 = least): Fr, Sn, In, Ba, Se, you should consider their positions in the periodic table. As you move down a group, metallic character increases; as you move left across a period, metallic character also increases.

Step 1: Locate the elements in the periodic table:
Fr (Francium): Group 1, Period 7
Sn (Tin): Group 14, Period 5
In (Indium): Group 13, Period 5
Ba (Barium): Group 2, Period 6
Se (Selenium): Group 16, Period 4

Step 2: Order the elements according to the trends in metallic character:
1. Fr (most metallic character)
2. Ba
3. In
4. Sn
5. Se (least metallic character)

So the correct order is: Fr 1, Ba 2, In 3, Sn 4, Se 5.

To know more about "Periodic table" refer here:

https://brainly.com/question/23856140?referrer=searchResults#

#SPJ11

Answer: ν= [tex]6.01 * 10^{20[/tex] hz

Explanation:

speed of light (c) = wavelength * frequency

[tex]3*10^8 = 499 * 10^{-9} *[/tex] ν

ν= [tex]6.01 * 10^{20[/tex] hz

The speed of light is described as the product of the wavelength and frequency of the light wave. Every color of the spectrum corresponds to a different wavelength and frequency.

To learn more about Frequency,  

https://brainly.com/question/29213586

https://brainly.com/question/30466268

We can use the ideal gas law to solve this problem:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in kelvins.

First, we need to calculate the number of moles of CO2 using its molar mass:

molar mass of CO2 = 12.01 + 2(15.99) = 44.01 g/mol

moles of CO2 = 20.0 g / 44.01 g/mol = 0.454 mol

Next, we can rearrange the ideal gas law to solve for V:

V = (nRT) / P

V = (0.454 mol)(8.31 J/(mol·K))(298 K) / (105 kPa) = 10.5 L

Therefore, 20.0 g of CO2 would occupy a volume of 10.5 L at a temperature of 25°C and a pressure of 105 kPa.

Based on the electronegativities of 2.1 for H and 2.5 for I, we can predict that HI (hydrogen iodide) would be expected to be a polar covalent molecule, with the iodine atom having a partial negative charge (δ-) and the hydrogen atom having a partial positive charge (δ+).

This is because electronegativity is the measure of an atom's ability to attract shared electrons in covalent bond. In the HI molecule, the iodine atom has a higher electronegativity than the hydrogen atom, which means it has a greater ability to attract the shared electrons in the covalent bond toward itself.

As a result, the electrons in the HI molecule will be more strongly attracted to the iodine atom, causing the iodine atom to have a partial negative charge and the hydrogen atom to have a partial positive charge.

To know more about electronegativities here

https://brainly.com/question/14031645

#SPJ4

The answer is (B) The city must ensure that they are aware of the effects on animals. They will have the knowledge they need from the study to balance the project's advantages and disadvantages.

By removing trees from the forest, birds, reptiles, and insects lose their habitats and food supplies, which results in a fall in the number of wild creatures. Small mammals, a source of food for mid- and large-sized mammals, will be impacted by this. The extinction of species is the result of a chain reaction.

Soil erosion increases as a result of deforestation. The loss of crops and fertile land is just one of the devasting repercussions of soil erosion on the environment.

To learn more about deforestation visit:

brainly.com/question/11697527

#SPJ1

Answer: Soil

Explanation:

Since Q < Ksp (4.0x10-5), PbF2 will not precipitate out of solution. The solution will contain Pb2+, F-, NH4+, and NO3- ions in equilibrium.

When lead nitrate (Pb(NO3)2) and ammonium fluoride (NH4F) are mixed, they will react to form lead fluoride (PbF2) and ammonium nitrate (NH4NO3) according to the following balanced chemical equation:

Pb(NO3)2 + 2 NH4F → PbF2 + 2 NH4NO3

To determine whether or not PbF2 will precipitate out of solution, we need to calculate the ion product (Q) and compare it to the solubility product constant (Ksp) for PbF2. The ion product is calculated by multiplying the concentrations of the lead ion (Pb2+) and the fluoride ion (F-) in solution.

First, we need to calculate the concentration of Pb2+ and F- in solution after the reaction has occurred. Since the initial concentrations of Pb(NO3)2 and NH4F are both 2.0x10-4 M, the total volume of the solution is 100.00 mL. Therefore, the concentration of Pb2+ and F- after the reaction will be:

[Pb2+] = (50.00 mL / 100.00 mL) × 2.0x10-4 M = 1.0x10-4 M

[F-] = (50.00 mL / 100.00 mL) × 2.0x10-4 M = 1.0x10-4 M

Now we can calculate the ion product:

Q = [Pb2+][F-] = (1.0x10-4 M)(1.0x10-4 M) = 1.0x10-8

Since Q < Ksp (4.0x10-5), PbF2 will not precipitate out of solution. The solution will contain Pb2+, F-, NH4+, and NO3- ions in equilibrium.

For more such questions on equilibrium

https://brainly.com/question/13414142

#SPJ11

Answer:

Explanatidescribe everyday events such as shaving, ear peircing, and brushing teeth so that they do not sound like "primitive" customs.

on:

a. 2.0 miles downhill

This is because the path taken by the camper appears to go primarily downhill and is relatively short in distance. However, the actual distance may be more or less than 2.0 miles depending on the scale of the diagram.

The combination of elements that will be most likely to form an ionic compound is one where there is a large difference in electronegativity between the two atoms. This is because ionic bonds are formed when there is a transfer of electrons from one atom to another, resulting in the formation of cations and anions.

In general, metal atoms tend to have low electronegativities, while nonmetal atoms tend to have high electronegativities. Therefore, a combination of a metal and a nonmetal is most likely to form an ionic compound.

For example, sodium (Na) is a metal with low electronegativity, while chlorine (Cl) is a non-metal with high electronegativity. When sodium and chlorine react, sodium donates its outer electron to chlorine, forming the ionic compound sodium chloride (NaCl).

Other examples of metal-nonmetal combinations that are likely to form ionic compounds include magnesium (Mg) and oxygen (O) (forming MgO), and aluminium (Al) and fluorine (F) (forming AlF3).

To know more about electronegativity, visit the link given below:

https://brainly.com/question/17762711

#SPJ4

100.0ml solution of 0.30m cu(no3)2 is mixed with 100.0ml of 6.0 m ammonia solution, the concentration cu in the resulting mixture is: 0.15 M.

To find the concentration of Cu in the resulting mixture, follow these steps:

1. Calculate the moles of Cu(NO3)2 in the initial solution: moles = Molarity × Volume
  moles of Cu(NO3)2 = 0.30 M × 0.100 L = 0.030 mol

2. Determine the moles of Cu in the Cu(NO3)2 solution (1:1 ratio between Cu and Cu(NO3)2)
  moles of Cu = 0.030 mol

3. Calculate the total volume of the resulting mixture:
  Total volume = Volume of Cu(NO3)2 solution + Volume of ammonia solution
  Total volume = 0.100 L + 0.100 L = 0.200 L

4. Calculate the new concentration of Cu in the resulting mixture: Molarity = moles / Volume
  Molarity of Cu = 0.030 mol / 0.200 L = 0.15 M

So, the concentration of Cu in the resulting mixture is 0.15 M.

To know more about "Molarity" refer here:

https://brainly.com/question/13601876#

#SPJ11

13473 calories of heat were added to 449.1 g of water to raise its temperature from 25 degrees C to 55 degrees C.

To calculate the heat added to water, we can use the following formula:

Q = m * c * ΔT

Q = heat added (in calories)

m = mass of water (in grams)

c = specific heat of water (1 calorie/gram degree Celsius)

ΔT = change in temperature (in degrees Celsius)

Using the given values:

m = 449.1 g

ΔT = (55 - 25) = 30 degrees C

Substituting these values into the formula, we get:

Q = 449.1 g * 1 cal/g °C * 30°C

Q = 13473 calories

Calories are a unit of measurement for energy. They are used to quantify the amount of energy in food and the amount of energy that our bodies burn through physical activity. One calorie is defined as the amount of energy required to raise the temperature of one gram of water by one degree Celsius

Learn more about calories here:

https://brainly.com/question/22374134

#SPJ1

Question :-

A gas experiences a temperature of 49.3 °C and a pressure of 893 mm Hg. By changing the pressure If it is increased to 778 mm Hg, what is the new temperature of the gas?

Solution :-

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow \sf \underline{ \dfrac{P_1}{T_1}=\dfrac{P_2}{T_2}}\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\:\:\longrightarrow \sf \dfrac{T_2}{P_2} = \dfrac{T_1}{P_1}\\[/tex]

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow \sf \underline{T_2 = \dfrac{T_1}{P_1}\times P_2}\\[/tex]

(Volume is constant )

Where-

As per question, we are given -

We are given the initial temperature in °C.So, we first have to convert the temperature in Celsius to kelvin by adding 273-

[tex]\sf T_1[/tex] = 49.3+ 273 = 322.3 K

Now that we have obtained all the required values, so we can put them into the formula and solve for T₂:

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow \sf\underline{ T_2 = \dfrac{T_1}{P_1}\times P_2}\\[/tex]

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow \sf T_2 = \dfrac{322.3}{893}\times 778\\[/tex]

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow \sf T_2 = 0.361 \times 778\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\:\:\longrightarrow \sf T_2= 280.856...... K\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\:\:\longrightarrow \sf T_2= (280.86 - 273)\: °C\\[/tex]

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow \sf \underline{T_2 = 7.8 \:°C}\\[/tex]

The correct answer is B) The particles absorb heat and spread farther apart.

When a liquid evaporates, the particles at the surface of the liquid gain enough energy (usually in the form of heat) to overcome the attractive forces between them and escape into the air as a gas. This energy breaks the intermolecular bonds between the liquid particles and allows them to move more freely.

The absorption of heat causes an increase in the kinetic energy of the particles, which makes them move faster and collide with each other more frequently. These collisions help to break the intermolecular bonds between the liquid particles.

As more and more particles escape from the surface of the liquid, the concentration of the liquid decreases, and eventually, the liquid can completely evaporate into a gas. The escaped particles also carry away some of the energy from the liquid, which is why the evaporation process cools down the remaining liquid and its surroundings.

Learn more about evaporates here:

https://brainly.com/question/11845221

#SPJ1

The correct option is (A) - This Bohr Model of atom describes that there are a total of 6 electrons in the given figure.

The electrons are positioned in circular orbitals at particular distances from the central nucleus in the Bohr model of the atom. These orbits create electron shells or energy levels, which allow us to see how many electrons are present in each shell. The number and the letter "n" are used to identify these energy levels. The first energy level nearest to the nucleus, for instance, is represented by the 1n shell. Normally, an electron resides in the shell with the lowest energy, which is the one closest to the nucleus. A photon of light's energy can raise it to a higher energy shell, but this is an unstable position, and the electron quickly returns to the ground state.

Learn more about atom here:

https://brainly.com/question/30898688

#SPJ1

To determine the actual pH of a solution with an unknown pH, a good choice of indicator would be a universal indicator.

A universal indicator is a mixture of several different pH-sensitive dyes that change color over a wide pH range, typically from 1 to 14.

This allows for more precise pH determination than single indicators, which are usually limited to a smaller pH range. Here are the steps to use a universal indicator:

1. Obtain a small sample of the unknown solution.

2. Add a few drops of the universal indicator to the solution.

3. Observe the color change in the solution.

4. Compare the color with the provided pH color chart that comes with the universal indicator.

5. Determine the pH value of the solution based on the color observed. Using a universal indicator will allow you to accurately determine the actual pH of the unknown solution.

To know more about universal indicator, refer here:

https://brainly.com/question/26797119#
#SPJ11

Nitrogen gas will effuse about 2.16 times faster than xenon gas under these conditions.

The rate of effusion of a gas will be inversely proportional to square root of its molar mass. This is known as Graham's law of effusion. Mathematically, we will express this relationship as:

rate of effusion ∝ 1/√(molar mass)

Let's assume that the temperature and pressure of the gases are kept constant. The molar mass of nitrogen gas (N₂) is 28 g/mol, and the molar mass of xenon gas (Xe) is 131 g/mol. Therefore, the ratio of their molar masses will be;

molar mass of Xe / molar mass of N₂ = 131 g/mol / 28 g/mol = 4.68

According to Graham's law of effusion, the ratio of their effusion rates is the inverse of the ratio of their square roots of their molar masses. This can be expressed as;

rate of effusion of N₂ / rate of effusion of Xe = √(molar mass of Xe) / √(molar mass of N₂) = √4.68 = 2.16

Therefore, 2.16 times faster will the nitrogen effuse.

To know more about rate of effusion here

https://brainly.com/question/12221871

#SPJ4

The pH of a solution can be calculated from the concentration of hydroxide ions using the formula pH = -log[H+]. In this case, the pH of the solution with an [OH-] concentration of 3.94e⁻⁵ M is approximately 9.6.

The concentration of hydroxide ions [OH-] in the solution is 3.94e⁻⁵ M.

The pH of a solution can be calculated using the formula:

pH = -log[H+]

where [H+] is the concentration of hydrogen ions in the solution. To find [H+], we can use the fact that in any aqueous solution at room temperature,

[H+][OH-] = 1.0 × 10⁻¹⁴

Rearranging this equation to solve for [H+], we get:

[H+] = 1.0 × 10⁻¹⁴ / [OH-]

Substituting the given value for [OH-], we get:

[H+] = 1.0 × 10⁻¹⁴ / 3.94e⁻⁵

[H+] = 2.54 × 10⁻¹⁰ M

Now we can use this value to calculate the pH:

pH = -log[H+]

pH = -log(2.54 × 10⁻¹⁰)

pH = 9.595

Therefore, the pH of the solution is approximately 9.6.

To know more about pH please refer: https://brainly.com/question/3050345

#SPJ1

The pH of the resulting solution after the addition of 13.0 mL of 0.100 M HCl is 4.7. This indicates that the solution is acidic and that there is still some of the weak acid HA remaining in the solution.

The addition of the strong acid HCl will react with the weak base A- produced during the titration, forming the weak acid HA and neutralizing some of the OH- ions present. This will result in a lower pH than the pH at the equivalence point, and the difference between the two pH values can be used to calculate the dissociation constant (pKa) of the weak acid.

At the equivalence point, the pH is determined by the dissociation constant (Ka) of the weak acid. In this case, the pale-pink phenolphthalein endpoint indicates that the pH at the equivalence point is approximately 8.5-9.5.

Since the pH at the equivalence point is higher than the pH of 4.7 after the addition of HCl, the weak acid must be less dissociated at the latter pH.

This means that the pKa of the weak acid is higher than the pH of 4.7, because a higher pKa corresponds to a weaker acid and a lower degree of dissociation.

Therefore, we can conclude that the pKa of the unknown weak acid HA is greater than 4.7, based on the pH of the resulting solution after the addition of HCl.

For more question on weak acid

https://brainly.com/question/30465440

#SPJ11

The balanced chemical equation for the reaction between carbon (C) and oxygen (O2) to form carbon monoxide (CO) and carbon dioxide (CO2) is below and the moles of CO2 produced is 0.117.

C + O2 → CO + CO2

According to the equation, for every 1 mole of C, we need 1 mole of O2 to produce 1 mole of CO and 1 mole of CO2.

Given that we have 0.155 moles of C and 0.117 moles of O2, we can use the mole ratio from the balanced equation to determine how many moles of CO2 could be produced:

Moles of CO2 = Moles of C = 0.155 moles

Therefore, based on the moles of each reagent, we could produce a maximum of 0.155 moles of CO2.

To determine the limiting reagent, we need to calculate the amount of CO2 that would be produced if all of the limiting reagent were consumed. We can do this by comparing the amount of CO2 that would be produced by each reagent and identifying the one that produces the smaller amount:

Using C as the limiting reagent:

Moles of CO2 produced = Moles of C = 0.155 moles

Using O2 as the limiting reagent:

Moles of CO2 produced = Moles of O2 × (1 mole CO2 / 1 mole O2) = 0.117 moles × (1 mole CO2 / 1 mole O2) = 0.117 moles

Since the amount of CO2 produced by the reaction with C is greater than the amount produced by the reaction with O2, we can conclude that O2 is the limiting reagent for this problem. Therefore, only 0.117 moles of CO2 could be produced based on the available amount of O2, and any excess C would be left over after the reaction.

Learn more about Balanced chemical equations here:

brainly.com/question/28294176

#SPJ4

The reaction between Sulfuric Acid and Sodium Hydroxide forms Water and Sodium Sulphate. Therefore option (1) is the correct answer.

Neutralisation is a chemical reaction where an acid and a base react with each other quantitatively. It is also written as Neutralisation. The acid strength of the reactant gives the pH of the neutralised solution.

Ever experienced a burning sensation in your stomach after eating too much spicy food? This is due to the formation of acid in the stomach. This problem can be cured by the consumption of an antacid which neutralizes the effect of acid, and this reaction is called a neutralisation reaction.

Visit here to learn more about the Neutralisation: https://brainly.com/question/3645180

#SPJ4