Domestic water enters the heat exchanger at a temperature of 7.0 °C and
leaves the heat exchanger at a temperature of 55 °C.
Each day 19 000 000 joules of energy are supplied to the water passing
through the heat exchanger.
Calculate the mass of water that can be heated each day.
Choose the correct equation from the Physics Equations Sheet.
Specific heat capacity of water = 4200 J/kg °C.
Give your answer to 2 significant figures.

The colors that we see in objects, including flowers like roses and violets, depend on the pigments they contain and the way that those pigments interact with light.

When light shines on an object, some of the light is absorbed by the object, while the rest is reflected. The color that we perceive is the color of the light that is reflected by the object.

In the case of roses, the petals contain pigments called anthocyanins, which absorb light in the green to yellow range of the spectrum and reflect light in the red to purple range. This is why we perceive roses as being red or purple.

Violets, on the other hand, contain pigments called violaxanthin and anthocyanins, which absorb light in the blue and violet range of the spectrum and reflect some light in the blue range. This is why we perceive violets as being blue.

Learn more about color here:

https://brainly.com/question/30186758

#SPJ11

The light bulb that produces the lowest lumens per watt is incandescent bulb. So, the correct answer is incandescent bulb.

An incandescent bulb is a type of electric light bulb that emits light by using a filament that glows when an electric current flows through it. An incandescent bulb is a kind of lamp that generates light by heating a filament inside a bulb until it radiates light.

Incandescent bulbs are the least energy-efficient bulbs on the market. They waste a lot of energy by emitting heat in addition to light, making them unsuitable for use in homes and buildings in hot weather. Incandescent bulbs, on average, produce 10 to 17 lumens per watt.

Therefore, it is the incandescent bulb that produces the lowest lumens per watt.

Know more about incandescent bulb here:

https://brainly.com/question/230401

#SPJ11

The wavelength of the carrier wave of a campus radio station broadcasting at a frequency of 102.2 MHz is approximately 2.94 meters, calculated using the formula wavelength = speed of light/frequency.

The wavelength of the carrier wave of a radio station can be calculated using the formula:

wavelength = speed of light/frequency

where the speed of light is approximately [tex]3 x 10^8 m/s[/tex].

Plugging in the frequency of the campus radio station, which is 102.2 MHz or [tex]102.2 x 10^6 Hz[/tex], we get:

wavelength [tex]= 3 x 10^8 m/s / 102.2 x 10^6 Hz = 2.93[/tex] meters

Therefore, the wavelength of the carrier wave of the campus radio station is 2.93 meters.

It's important to note that the wavelength of a radio wave is inversely proportional to its frequency. This means that as the frequency of the wave increases, its wavelength decreases, and vice versa.

learn more about  radio station here:

https://brainly.com/question/29803733

#SPJ4

The current from the secondary coil when a step-down transform produces a voltage of 3 V across the secondary coil when the voltage across the primary coil is 120 with a current of 16 mA is 0.0004 A.

The step-down trаnsformer is defined аs а trаnsformer thаt converts high voltаge into low voltаge. Therefore, in the step-down trаnsformer, the voltаge in the secondаry coil is less thаn the voltаge in the primаry coil.

The trаnsformer formulа is given by,

Vp/Vs = Np/Ns

Where, Vp is the voltаge in the primаry coil, Vs is the voltаge in the secondаry coil, Np is the number of turns in the primаry coil, аnd Ns is the number of turns in the secondаry coil.

Reаrrаnging the formulа, we get

Is/Ip = Np/Ns = Vs/Vp

We know the voltаge аcross the secondаry coil is 3 V аnd the voltаge аcross the primаry coil is 120 V. Therefore,

Vs/Vp = 3/120 = 1/40

Current in the primаry coil = 16 mА = 0.016 А

Therefore,

Is/Ip = 1/40Is

= (1/40) × 0.016= 0.0004 А

Therefore, the current from the secondаry coil is 0.0004 А.

For more information about the current form refers to the link: https://brainly.com/question/10226193

#SPJ11

A helium burst is a very brief exergonic nuclear fusion of enormous quantities of helium into carbon using the triple-alpha mechanism that occurs inside the core of low mass stars (between 0.8 and 2.0 M).

The helium flash Helium fusion starts when the helium-rich core at the RGB's tip ignites. The star moves quickly to the Horizontal Branches region of the H-R diagram as a result of the core's ignition.

Helium flash refers to the sudden commencement of helium fission in a low-mass star's core. The star then stabilises and momentarily shrinks in size and brilliance. Fusion comes to an end when the core's supply of helium is depleted in planets with masses of up to twice that of the Moon or less.

To know more about nuclear visit:

https://brainly.com/question/18187269

#SPJ1

The spectrum that shows the hydrogen lines for a star that is moving away from us is the redshifted spectrum.

Hydrogen lines refer to the spectral lines of the hydrogen atom that are produced when the electron in the hydrogen atom jumps from a higher energy level to a lower energy level. The lines appear in the spectrum at wavelengths of 656.3 nm, 486.1 nm, 434.1 nm, and 410.2 nm when hydrogen gas is illuminated by a light source. Spectra, in general, are divided into two categories: emission spectra and absorption spectra.

Hydrogen lines are commonly seen in the emission spectra of stars. The stationary spectrum at the top in the diagram shown below displays the visible lines for hydrogen at rest. However, when a star is moving away from us, its hydrogen lines will experience a shift towards longer wavelengths, which is known as redshift. This shift is caused by the Doppler effect. Therefore, the spectrum that displays the hydrogen lines for a star that is moving away from us is the redshifted spectrum.

Learn more about the stationary spectrum:

https://brainly.com/question/16865678

#SPJ11

The gravitational field strength where the experiment was conducted is most nearly  0.30 N/kg.The coorect option is (c).To determine the gravitational field strength where the experiment was conducted, we can use the formula for the period of a pendulum:

T = 2π√(L/g),where T is the period of oscillation, L is the length of the pendulum, and g is the gravitational field strength. In this case, we are given the information that it took 81 seconds for the pendulum to oscillate 10 times, so the period T is 81/10 = 8.1 seconds. The length L of the pendulum is given as 0.5 meters.

We can rearrange the formula to solve for g:
g = L/(T^2/(4π^2))
Now, we can plug in the given values for T and L:
g = 0.5/(8.1^2/(4π^2))
g ≈ 0.5/(65.61/(4π^2))
g ≈ 0.5/(65.61/39.4784)
g ≈ 0.5/1.6611
g ≈ 0.3009 N/kg, Therefore, the gravitational field strength is most nearly 0.30 N/kg.

To know more about gravitational field click here

brainly.com/question/14906359

#SPJ11

Indeed, the limited range of wavelengths between infrared and ultraviolet light constitutes visible light. The wavelength of visible light falls between 400 and 700 nanometers.

The wavelength range of UV "light" is about between 10 and 400 nanometers. Violet light has a wavelength of about 400 nanometers (or 4,000 ). The frequency range of ultraviolet light is between 800 terahertz (THz, or 1012 hertz), and 30,000 THz.

The visible light spectrum has a wavelength range of 400 to 700 nanometers, and in this section, we learn what each color's wavelength is. The visible light spectrum has multiple distinct colours with various wavelengths.

To know more about wavelengths visit:-

https://brainly.com/question/13533093

#SPJ1

satellite is spinning at 6.0 rev/s. the satellite consists of a main body in the shape of a sphere of radius 2.0 m and mass 9725 kg, and two antennas projecting out from the center of mass of the main body that can be approximated with rods of length 3.0 m each and mass 10 kg. the antennas lie in the plane of rotation. 1,174,254.4 kg [tex]m^2[/tex]/s is the angular momentum of the satellite

To find the angular momentum of the satellite, first, you need to calculate the moment of inertia of each component (main body and antennas) and then multiply it by the angular speed.
Calculate the moment of inertia of the main body (sphere).
The moment of inertia of a sphere is given by the formula:

I = (2/5) x M x [tex]R^2[/tex]
Where M is the mass (9725 kg) and

R is the radius (2.0 m).
[tex]I_{main}[/tex] = (2/5) x 9725 x [tex]2^2[/tex] = 31120 kg [tex]m^2[/tex]

Calculate the moment of inertia of one antenna (rod).
The moment of inertia of a rod rotating about its end is given by the formula:

I = (1/3) x m x [tex]L^2[/tex]
Where m is the mass (10 kg) and L is the length (3.0 m).
[tex]I_{antenna}[/tex] = (1/3) x 10 x [tex]3^2[/tex] = 30 kg [tex]m^2[/tex]
Since there are two antennas, calculate the total moment of inertia of the antennas.
I_total_antennas = 2 x [tex]I_{antenna}[/tex]  = 2 x 30 = 60 kg [tex]m^2[/tex]
Find the total moment of inertia of the satellite by adding the main body and antennas' moment of inertia.
[tex]I_{total}[/tex] = [tex]I_{main}[/tex] + [tex]I_{antenna}[/tex]

[tex]I_{total}[/tex]  = 31120 + 60 = 31180 kg [tex]m^2[/tex]
Calculate the angular momentum (L) using the formula:

L = [tex]I_{total}[/tex]  x ω
Where ω is the angular speed (6.0 rev/s), and to convert it to radians per second, multiply by 2π:

ω = 6.0 x 2π = 37.68 rad/s
L = 31180 x 37.68 = 1174254.4 kg [tex]m^2[/tex]/s
The angular momentum of the satellite is 1,174,254.4 kg [tex]m^2[/tex]/s.

For similar question on angular momentum

https://brainly.com/question/4126751

#SPJ11

The object in the image is called an electromagnet

The strength of the magnetic field can be increased by increasing the number of turns.

An electromagnet is a type of magnet that is created by the flow of electric current through a coil of wire. Unlike a permanent magnet, which produces a magnetic field at all times, an electromagnet's magnetic field is created and maintained by the flow of current.

The strength of the magnetic field produced by an electromagnet depends on several factors, including the number of turns in the coil, the current flowing through the wire, and the material of the core (if one is used).

Learn more about electromagnet:https://brainly.com/question/3427992

#SPJ1

A situation in a basketball game where a player has a lot of potential energy is during a jump shot.

When a basketball player jumps to take a shot, their body gains potential energy due to their height above the ground. This potential energy is stored in the player's muscles as they prepare to release the ball towards the basket.

The higher the jump, the more potential energy the player has, which can translate to a more forceful and accurate shot. As the player releases the ball and it begins to move towards the basket, the potential energy is converted into kinetic energy. The kinetic energy of the ball is then used to score a basket if it goes through the hoop.

To know more about potential energy, here

brainly.com/question/24284560

#SPJ4

The minimum amount of energy required for an 80-kg climber carrying a 20-kg pack to climb Mt. Everest, which is 8,850 meters high is  8,673,550 Joules. It can be calculated using the formula for gravitational potential energy.

Gravitational potential energy= PE = m ×g×h, where:
PE = potential energy
m = mass (total mass of the climber and the pack)
g = acceleration due to gravity (approximately 9.81 m/s²)
h = height (the altitude of Mt. Everest)

First, determine the total mass of the climber and the pack:
m = 80 kg (climber) + 20 kg (pack) = 100 kg
Next, find the gravitational potential energy:
PE = 100 kg ×9.81 m/s² × 8,850 m
PE = 100 kg × 9.81 m/s²× 8,850 m = 8,673,550 Joules

Therefore, the minimum amount of energy required is 8,673,550 Joules. Keep in mind that this calculation assumes no energy loss due to factors such as friction, air resistance, or the climber's physical exertion beyond lifting their body and the pack vertically. In reality, the energy required would likely be higher due to these factors.

To know more about potential energy click here

brainly.com/question/22938609

#SPJ11

The total momentum of the child and the bike together is 282.66 kg m/s to the northwest.

The momentum of the child can be calculated as:

p_child = m_child * v_child

where m_child = 78.30 kg is the mass of the child, and v_child = 3.39 m/s is the velocity of the child.

p_child = 78.30 kg * 3.39 m/s = 265.35 kg m/s to the northwest

The momentum of the bike can be calculated as:

p_bike = m_bike * v_bike

where m_bike = 5.1 kg is the mass of the bike, and v_bike = 3.39 m/s is the velocity of the bike.

p_bike = 5.1 kg * 3.39 m/s = 17.31 kg m/s to the northwest

To find the total momentum of the child and the bike together, we simply add the individual momenta together:

p_total = p_child + p_bike

p_total = 265.35 kg m/s + 17.31 kg m/s

p_total = 282.66 kg m/s to the northwest

The total momentum of the child and the bike together is 282.66 kg m/s to the northwest.

learn more about momentum here

https://brainly.com/question/7538238

#SPJ1

The cycle of carbon and energy occurs in the food chain when the grass fixes atmospheric carbon through photosynthesis, the rabbit consumes the grass to obtain energy and organic carbon, and the rabbit's excrement decomposes and is buried in the ground.

Primary consumers are animals that only consume plant matter. Like cows, sheep, deer, and caterpillars, they are herbivores. Animals that eat main consumers are considered secondary consumers (herbivores).

For instance, grass generates its own nutrition from sunlight. A bunny consumes some grass. Eaten by a fox, the rabbit. As a fox dies, microbes decompose its remains and return it to the soil, where it feeds grass-like plants.

To know more about energy visit:-

https://brainly.com/question/11399976

#SPJ1

When the magnitude of the magnetic field in an EM wave is doubled, the intensity of the wave doubles. The correct option is B.

Magnetic fields are a type of field that surrounds magnetic materials or charged particles in motion. When a charged particle moves, it generates a magnetic field, which can then exert force on other charged particles in the vicinity. The intensity of the wave is determined by the amplitude of the electric and magnetic fields in the electromagnetic wave.

Since intensity is proportional to the square of the electric and magnetic field's amplitude, doubling the amplitude of the magnetic field will result in a quadrupling of the intensity. However, in this case, only the magnitude of the magnetic field has been doubled.

As a result, the intensity of the wave would only double, not quadruple. When the magnetic field's magnitude is doubled, the electric field's amplitude remains constant, resulting in the intensity doubling as well. The correct answer is thus option B.

To know more about magnetic fields refer here:

https://brainly.com/question/3160109#

#SPJ11

We can solve this problem using the conservation of energy principle:

Initial potential energy = Final kinetic energy

The initial potential energy is equal to the potential energy at the top of the tower:

PE = mgh

where m is the mass of the ball, g is the acceleration due to gravity (9.81 m/s^2), and h is the height of the tower (46.6 m).

PE = (0.1557 kg)(9.81 m/s^2)(46.6 m) = 71.9 J

The final kinetic energy of the ball just before impact can be calculated using the formula:

KE = 1/2 mv^2

where m is the mass of the ball and v is its velocity.

Since the ball was dropped from rest, its initial velocity was zero. Therefore, all of the potential energy at the top of the tower is converted to kinetic energy just before impact.

PE = KE

71.9 J = 1/2 (0.1557 kg) v^2

v^2 = (2 × 71.9 J) / 0.1557 kg = 828.6

v = sqrt(828.6) = 28.8 m/s (rounded to one decimal place)

The velocity of the ball just before impact is 28.8 m/s.

The kinetic energy of the ball just before impact can be calculated using the formula:

KE = 1/2 mv^2

where m is the mass of the ball and v is its velocity.

KE = 1/2 (0.1557 kg) (28.8 m/s)^2 = 61.7 J (rounded to one decimal place)

Therefore, the ball has 61.7 J of kinetic energy just before impact.

21 turns are required to generate a peak voltage of 160 V for a  coil with an area of 2.0 m² that rotates in a 0.010T magnetic field at a frequency of 60 Hz.

In order to determine the number of turns needed to generate a peak voltage of 160 V, we need to use the formula for the peak voltage of an alternating current (AC) generator. The formula is given as follows:

Vp = 2 * π * f * N * A * B

Where: Vp is the peak voltage, f is the frequency of rotation, N is the number of turns, A is the area of the coil, and B is the magnetic field strength.

The area of the coil is 2.0 m², the magnetic field strength is 0.010 T, the frequency of rotation is 60 Hz, and the peak voltage is 160 V.

We can substitute these values into the above formula to find the number of turns:

160 = 2 * π * 60 * N * 2.0 * 0.010

Simplifying:

160 = 7.54 N

Therefore:

N = 160 / 7.54

N ≈ 21.22

Thus, approximately 21 turns are needed to generate a peak voltage of 160 V.

To know more about peak voltage, refer here:

https://brainly.com/question/11629192#

#SPJ11

The woman produces a torque of 26.5 Nm while changing the flat tire with a 50.0 cm long tire iron and exerting a force of 53.0 N. To find the torque produced, we can use the following formula:

Torque (τ) = Force (F) × Lever arm length (r) × sin(θ), where:
τ = Torque
F = Force (53.0 N in this case)
r = Lever arm length (50.0 cm or 0.5 m in this case)
θ = Angle between force and lever arm (assumed to be 90 degrees for maximum torque)

Since the woman is using the tire iron perpendicular to the tire, we can assume that the angle between the force and the lever arm is 90 degrees. In this case, the sine of 90 degrees is 1, so the formula simplifies to:
Torque (τ) = Force (F) × Lever arm length (r)
Now, we can plug in the values given in the question:
τ = 53.0 N × 0.5 m
τ = 26.5 Nm.So, the woman produces a torque of 26.5 Nm

To know more about torque click here

brainly.com/question/30719994

#SPJ11

Modest evidence suggests that young people who commit crimes deserve to service their entire lives in prison. Modicum demonstrates that despite the fact that children commit crimes, they do not merit the harsh punishment Dutton received while incarcerated.

The court stated that because of their youth, they are more impulsive, more susceptible to social pressure, and less able to see the repercussions of their actions. Their brains are also reportedly less developed. There are 79 of these juvenile killers alive today; they will all perish in jail.
Context is crucial when discussing juvenile punishment instances. The juvenile death sentence was abolished by the Supreme Court in 2005 on the grounds that children are not the same as adults. Younger people, according to the court, have brains that are actually less developed, are more impulsive, are more susceptible to social pressure, and are less able to see the effects of their actions.
To know more about Dutton go through:-

https://brainly.com/question/21463976

#SPJ4

to investigate the issue of juvenile offenders in the United States receiving life sentences without the possibility of release.

The article's primary goal is to draw attention to the problem of juvenile offenders in the United States receiving life sentences without the possibility of release. In this article, the impact of this sentencing strategy on juvenile offenders is examined, and the fairness of such sentences is questioned. The author's claim that these punishments are ineffectual and unjust is supported by data and evidence. The paper also urges a shift in strategy and offers substitutes that give young offenders priority in rehabilitation and restorative justice.

learn more about juvenile offenders here;

https://brainly.com/question/15245008

#SPJ4

The speed of the truck is approximately 17.32 m/s when a 1500kg ha sthe same Kinetic energy as a 4500kg truck.

The kinetic energy (KE) of an object is given by the formula:

[tex]KE = (1/2) * m * v^2[/tex]

where m is the mass of the object and v is its velocity.

In this problem, we are given that the kinetic energy of a 1500 kg car traveling at 30 m/s is the same as the kinetic energy of a 4500 kg truck. Therefore, we can write:

[tex](1/2) * 1500 * 30^2 = (1/2) * 4500 * v^2[/tex]

Simplifying this equation, we get:

[tex]675000 = 2250 * v^2[/tex]

Dividing both sides by 2250, we get:

[tex]v^2 = 300[/tex]

Taking the square root of both sides, we get:

[tex]v = \sqrt (300) = 17.32 m/s[/tex]

Kinetic energy (KE) is the energy that an object possesses due to its motion. Any object that is in motion has kinetic energy, and the amount of kinetic energy it has depends on its mass and velocity.

learn more about kinetic energy here:

https://brainly.com/question/26472013

#SPJ1

This type of soil occur in temperate climates where rainfall is moderate to high (c)  pedalfer soil is correct option.

Thus (c ) is correct answer.

To know more about soil

https://brainly.com/question/12936553

#SPJ4

Here is a graphical representation of the vector pointing upwards represents the fisherman's velocity attached.

Vectors are mathematical objects used to represent quantities that have both magnitude and direction. They can be visualized as arrows, where the length of the arrow represents the magnitude of the vector and the direction of the arrow represents the direction of the vector.

Examples of quantities that can be represented as vectors include force, velocity, acceleration, and displacement. The vector pointing upwards represents the fisherman's velocity of 2 m/s towards the North, while the vector pointing towards the right represents the river's current of 1.3 m/s towards the East.

Learn more on vectors here: https://brainly.com/question/25811261

#SPJ1

The total work done on the elevator after 18.0 m is 28.75 kJ.

To find the work done on the elevator, we first need to determine the net force acting on it. We can do this by subtracting the frictional force from the force applied by the elevator cable:

Net force = applied force - frictional force

Net force = (mass of elevator) x (acceleration)

Net force = (1550 kg) x (0.750 m/s^2) - (200 N)

Net force = 1050 N

Now that we have the net force, we can calculate the work done on the elevator using the work-energy principle, which states that the work done on an object is equal to its change in kinetic energy:

Work done = (change in kinetic energy)

Work done = (final kinetic energy) - (initial kinetic energy)

Work done = (1/2)(mass)(final velocity)^2 - (1/2)(mass)(initial velocity)^2

To find the final velocity, we can use the kinematic equation:

final velocity^2 = initial velocity^2 + 2(acceleration)(distance)

final velocity^2 = 0 + 2(0.750 m/s^2)(18.0 m)

final velocity = 6.06 m/s

Now we can plug in the values to calculate the work done:

Work done = (1/2)(1550 kg)(6.06 m/s)^2 - (1/2)(1550 kg)(0)^2

Work done = 28,746 J

Work done in kJ = 28,746 J / 1000 = 28.75 kJ

Therefore, the total work done on the elevator after 18.0 m is 28.75 kJ.

To know more about frictional force, visit:

https://brainly.com/question/30280752

#SPJ1

The torque about the center of mass of the beam is 0 Nm.

To calculate the torque about the center of mass of the beam, follow these steps:
1. Identify the forces acting on the beam:

At the east end, there is a 200 N downward force, and at the west end, there is a 200 N upward force.
2. Calculate the distance from the center of mass to each force:

Since the beam is 2.00 m long, the center of mass is at the midpoint, which is 1.00 m from each end.
3. Calculate the torque due to each force:

Torque is the product of force and the perpendicular distance from the center of mass.

For each force, the torque will be 200 N * 1.00 m = 200 Nm.
4. Determine the direction of each torque:

The downward force at the east end creates a counterclockwise torque, while the upward force at the west end creates a clockwise torque.
5. Calculate the net torque about the center of mass:

Since both torques have the same magnitude but act in opposite directions, the net torque is 0 Nm.

For similar question on torque.

https://brainly.com/question/30698261

#SPJ11

The magnitude of the force that each wire exerts on a 1.20 -m length of the other is 0.

Using the Biot-Savart law, the formula for the magnitude of the force is

F = BIL sinθ

Given:  i1 = 10.0 A and i2 = 4.00 A.

Distance r1 and  r2.

r1 = √(2² + 1.2²) = 2.44 m

r2 = √(2² + 1.2²) = 2.44 m

where, r1 is the distance from i1 to i2 and  r2 is the distance from i2 to i1

The magnetic field at the location of the other wire for each wire is,

B1 = (μ₀ / 2π) i1 / r1 = (4π × 10-7 T m/A / 2π) × 10.0 A / 2.44 m = 6.49 × 10-6 T

B2 = (μ₀ / 2π) i2 / r2 = (4π × 10-7 T m/A / 2π) × 4.00 A / 2.44 m = 2.60 × 10-6 T

Calculating force on each wire.

For F1, I = 4.00 A, L = 1.20 m, θ = 90°

F1 = B2IL1 sinθ1 = 0

For F2, I = 10.0 A, L = 1.20 m, θ = 90°

F2 = B1IL2 sinθ2 = 0

Therefore, there is no magnetic force between the two wires.

Know more about force here:

https://brainly.com/question/25239010

#SPJ11

Answer:

To calculate the pressure exerted by water at the bottom of the tank, we need to use the formula:

Pressure = Density x Gravity x Height

where:

Density = 1000 kg/m³ (density of water)

Gravity = 9.81 m/s² (acceleration due to gravity)

Height = 12 m (height of the tank)

Substituting the values in the formula, we get:

Pressure = 1000 kg/m³ x 9.81 m/s² x 12 m

Pressure = 117,720 Pa (Pascals)

The final speed of a baseball thrown at 48 m/s with a mass of 0.16 kg after being hit by a bat with an average force of 8300 N for 2.6 ms is 58.58 m/s.

The initial velocity of the baseball is given as 48 m/s. We have to find the final velocity of the baseball after it is hit by a bat. The mass of the baseball is given as 0.16 kg, and the force exerted by the bat is given as 8300 N for 2.6 ms. The formula for calculating the final velocity of an object is as follows:

v = u + (Ft/m)

Here, v is the final velocity of the baseball, u is the initial velocity of the baseball, F is the force exerted on the baseball, t is the time for which the force is exerted, and m is the mass of the baseball.

Now, let us substitute the given values in the above formula to find the final velocity of the baseball:

v = 48 + (8300 × 2.6 × 10^-3 / 0.16) = 58.58 m/s

Therefore, the final velocity of the baseball is 58.58 m/s.

Learn more about Force:

https://brainly.com/question/13370981

#SPJ11

The direction of  magnetic force acting on a current-carrying wire in a uniform magnetic field depends on  direction of  magnetic field and the direction of the current. The correct answer is option: c .

The force is perpendicular to both the direction of the magnetic field and the direction of  current, and follows  right-hand rule. To use the right-hand rule, point  thumb of your right hand in the direction of the current, and then curl your fingers in  direction of the magnetic field. The direction in which your fingers point is the direction of  magnetic force acting on the wire. Therefore, the direction of magnetic force acting on the wire in part b will be due west . Option: c is correct.

To know more about magnetic force, here

brainly.com/question/3160109

#SPJ4

-- The complete question is, To understand the magnetic force on a straight current- carrying wire in a uniform magnetic field.

Magnetic fields exert forces on moving charged particles, whether those charges are moving independently or are confined to a current-carrying due north wire.

The magnetic force F on an individual moving charged particle depends on its velocity v and charge q. In the case of a current-carrying wire, many charged particles are simultaneously in motion,

So the magnetic force depends on the total current I and the Length of What is the direction of the magnetic force acting on the wire in part b due to the applied magnetic field?

a.- due south

b - due east

c- due west

d- straight up

e- straight down --

The ideal mechanical advantage of the screw is 8.08.

The ideal mechanical advantage of a screw is determined by dividing the circumference of the screw by the thread width.

Circumference of screw = π × diameter of head = π × 0.812 cm

Thread width = 0.318 cm

Ideal mechanical advantage = Circumference of screw / Thread width

Ideal mechanical advantage = (π × 0.812 cm) / 0.318 cm

Ideal mechanical advantage = 8.08

Thus, the screw's ideal mechanical advantage is 8.08.

This means that for every rotation of the screw, it will move a distance of 8.08 times the thread width, making it easier to lift or move a heavy load. Ideal mechanical advantage is a theoretical concept, and the actual mechanical advantage may differ from it due to various factors such as friction and wear and tear of the screw.

To know more about mechanical advantage, refer here:

https://brainly.com/question/16617083#

#SPJ11

The time interval required for the activity to decline to 10 Bq is closest to 820 s. The correct answer is Option D.

The half-life of a radioactive isotope is the time required for half of the atoms in a given quantity of the isotope to decay. The decay constant, on the other hand, is a parameter used to describe how rapidly a radioactive material decays.

The time interval required for the activity to decline can be calculated using the formula:

Activity_final = Activity_initial * e^(-decay_constant * time)

Where Activity_initial is 70 Bq, Activity_final is 10 Bq, and the decay_constant is 3.1 x 10⁻³ s⁻¹.

Rearranging the formula to find the time:

time = (ln(Activity_final / Activity_initial)) / (-decay_constant)

Plugging in the values:

time = (ln(10 / 70)) / (-3.1 x 10⁻³)

time ≈ 820 s

So, the closest answer is D) 820 s.

Learn more about decay constant here: https://brainly.com/question/27723608

#SPJ11