During a thunderstorm at a sports event, a detector goes off to let participants know there is lightning in the area so people can seek shelter. The accuracy of the lightning detector is summarized in the table.


Lightning detector activates Lightning detector does not activate Row Totals
Lightning in area 88% 2% 90%
No lightning in area 7% 3% 10%
Column Totals 95% 5% 100%


What is the ratio of false positives to false negatives in this scenario? Round your answer to one decimal place.
0.1
1.5
2.3
3.5

Answer:

8$ is the answer so chose that one

For each cup of sugar, we need 5/3 cups of milk.

A fraction is used to express a portion of a whole or a ratio of two values. It is represented by a numerator and a denominator separated by a horizontal line, with the numerator above and the denominator below.

To find : how much milk is needed for each cup of sugar

we need to use the given ratio of sugar to milk and invert it:

1/5 cup of sugar per 1/3 cup of milk

To find how much milk is needed for each cup of sugar, we need to divide the amount of milk by the amount of sugar:

(1/3 cup of milk) ÷ (1/5 cup of sugar) = (1/3) × (5/1) = 5/3 cup of milk per cup of sugar

Therefore, for each cup of sugar, we need 5/3 cups of milk.

To know more about ratio, visit:

https://brainly.com/question/1504221

#SPJ1

Answer:

35g^2+38g+8

Step-by-step explanation:

35g^2+38g+8

Answer:

x=7 y=14

Step-by-step explanation:

2x-x=11-4

x=7

y-4=x+3

y-4=7+3

y=7+3+4

y=14

The equation d=65t models the distance, d, that Malcolm's family travels after t hours. Malcolm's family travels 65 miles per hour faster than Theo's family.

The equation d=65t models the distance, d, that Malcolm's family travels after t hours. To calculate how much faster Malcolm's family travels than Theo's family, we must first know the speed of Theo's family. Let's say Theo's family travels at 25 miles per hour. To calculate the difference in speed between the two families, we must subtract 25 mph from 65 mph. The difference is then 40 mph, meaning Malcolm's family travels 40 mph faster than Theo's family.

Learn more about equation here

https://brainly.com/question/28243079

#SPJ4

The transformation T: R^3 → R^2 defined by T(x1, x2, x3) = (|x1|, 0) is not linear transformation as it violates the additivity and homogeneity properties of linearity.

To show that the transformation T: R^3 → R^2 defined by T(x1, x2, x3) = (|x1|, 0) is not linear, we need to demonstrate that it violates at least one of the two properties of linearity, namely, additivity and homogeneity.

Additivity: T(u + v) = T(u) + T(v) for all vectors u and v in R^3.

Let u = (1, 2, 3) and v = (4, 5, 6) be two vectors in R^3. Then,

T(u) = T(1, 2, 3) = (|1|, 0) = (1, 0)

T(v) = T(4, 5, 6) = (|4|, 0) = (4, 0)

T(u + v) = T(1+4, 2+5, 3+6) = T(5, 7, 9) = (|5|, 0) = (5, 0)

However,

T(u) + T(v) = (1, 0) + (4, 0) = (5, 0)

Since T(u + v) ≠ T(u) + T(v), the transformation T is not additive and hence not linear transformation.

Homogeneity: T(cu) = cT(u) for all vectors u in R^3 and all scalars c.

Let u = (1, 2, 3) be a vector in R^3, and let c = 2 be a scalar. Then,

T(u) = T(1, 2, 3) = (|1|, 0) = (1, 0)

T(cu) = T(2, 4, 6) = (|2|, 0) = (2, 0)

However,

cT(u) = 2(1, 0) = (2, 0)

Since T(cu) ≠ cT(u), the transformation T is not homogeneous and hence not linear.

To know more about Linear transformation:

https://brainly.com/question/30514241

#SPJ4

Answer:

Ali will cover 1,080m altogether.

Step-by-step explanation

If the field is 80m by 100m and there are 2 sides of each of those measurements to make a whole round around the field, then one round would be (80m x 2) + (100m x 2) = 360. Since Ali wants to do three laps around the field, then you multiply 360 x 3 to get 1080m total.

The perimeter of the baby quilt is approximately 48.66 feet.

A quilt that is 3 feet long cannot have a surface area of 64 square feet, hence it appears that the information provided is incorrect. When calculating the area of a quilt, the length and breadth are multiplied. If the quilt is just 3 feet long, for example, the width would need to be 64/3 = 21.3 feet, which is not a practical size for a baby quilt.

Let's assume the information provided is false and try to determine the perimeter of a baby quilt whose surface area is 64 square feet.

To do this, we must first determine the quilt's proportions. Given that a rectangle's area is determined by multiplying its length by its width, we may determine the width by dividing the area by the length.

width = area / length, or 64 / 3 = 21.33 feet (rounded to two decimal places)

The baby quilt is 3 feet by 21.33 feet.

We add the lengths of the four sides to find the perimeter.

The perimeter is equal to 2 (length + width)/2 (3 + 21.33) = 48.66 ft (rounded to two decimal places)

Learn more about perimeter here:

https://brainly.com/question/6465134

#SPJ4

To draw a Venn diagram of two sets in class 7, draw two overlapping circles inside a rectangle representing the universal set, label each circle with the name of its corresponding set, and identify the elements that belong to each set and the overlapping region.

Steps to draw venn diagram :

These are the steps to draw a Venn diagram for two sets, follow these steps.

1. Draw two overlapping circles, one for each set. Label them A and B.

2. Write the elements that are common to both sets in the overlapping region of the circles.

3. Write the elements that belong only to set A in the non-overlapping part of circle A.

4. Write the elements that belong only to set B in the non-overlapping part of circle B.

For example, let's say we have two sets:

A = {1, 2, 3, 4, 5}

B = {3, 4, 5, 6, 7}

To draw a Venn diagram for these sets, we would follow these steps:

1. Draw two overlapping circles, one for A and one for B.

2. Write the elements that are common to both sets in the overlapping region of the circles. In this case, the common elements are 3, 4, and 5.

3. Write the elements that belong only to set A in the non-overlapping part of circle A. In this case, the elements that belong only to set A are 1 and 2.

4. Write the elements that belong only to set B in the non-overlapping part of circle B. In this case, the elements that belong only to set B are 6 and 7.

5. The completed Venn diagram for these sets should look like two overlapping circles with the common elements in the overlap region and the unique elements in the non-overlapping regions, as shown below:

To know more about Venn diagram, visit:

https://brainly.com/question/29301560

#SPJ1

The mean number of miles the hiker walked for the 6 days is 5.5. We can find it in the following manner.

To find the mean number of miles the hiker walked for the 6 days, we need to calculate the sum of the number of miles and then divide it by 6 (the number of days).

Sum of miles = 8 + 5 + 7 + 2 + 2 + 9 = 33

Mean = Sum of miles / Number of days = 33 / 6 = 5.5

Therefore, the mean number of miles the hiker walked for the 6 days is 5.5.

The closest option to this value is option C: 6.5. However, it is not the correct answer.

In mathematics, the mean is the average of a set of data, which is calculated by adding all the numbers together and then dividing the result by the total number of numbers. For instance, the mean for the collection of values 8, 9, 5, 6, 7 is 7, since 8 + 9 + 5 + 6 + 7 = 35, and 35/5 = 7.

Learn more about mean here brainly.com/question/30112112

#SPJ4

Based on the two-way table, it appears that there is an association between grade level and preference for school color.

As the grade level increases, there is a trend towards a greater preference for blue. Among sixth graders, there were 17 students who preferred blue and 39 who preferred green. Among seventh graders, 27 preferred blue and 27 preferred green. Finally, among eighth graders, 41 preferred blue and 14 preferred green. It is important to note, however, that this trend may not necessarily imply causation. There could be other factors at play that are contributing to this association, such as the age of the students or the characteristics of the school environment. Additionally, the sample size in each grade level is relatively small, which could lead to some variability in the results.

Learn more about  grade level here:

https://brainly.com/question/23946822

#SPJ1

The equation 9x^2 - 6xy + y ^2 + 6x - 5y + 12 = 0 represents shape option (B) Ellipse.

The given equation is 9x^2 - 6xy + y^2 + 6x – 5y + 12 = 0.

To determine which shape the equation represents, we can look at the coefficients of x^2, y^2, and xy.

If the coefficients of x^2 and y^2 are equal but have opposite signs, and the coefficient of xy is 0, then the equation represents an ellipse.

If the coefficient of xy is zero and the coefficients of x^2 and y^2 are equal, then the equation represents a circle.

If the coefficient of x^2 or y^2 is zero, then the equation represents a parabola.

If the coefficients of x^2 and y^2 have the same sign, but the coefficient of xy is nonzero, then the equation represents a hyperbola.

Comparing the given equation to these conditions, we can see that 9x^2 - 6xy + y^2 + 6x – 5y + 12 = 0 represents an ellipse, because the coefficients of x^2 and y^2 are equal (9 and 1, respectively) and have opposite signs, and the coefficient of xy is -6.

Therefore, the answer is (B) Ellipse.

Learn more about Ellipse here

brainly.com/question/29205228

#SPJ4

The given question is incomplete, the complete question is:

The equation 9x^2 - 6xy + y^2 + 6x – 5y + 12 = 0 represents which of these shapes: A)Hyperbola B) Ellipse C)  Parabola D) Circle

Answer:

Growth

3.8%

Step-by-step explanation:

Look at the number raised to a power.

In this case it is 1.038

If the number raised to a power is greater than 1, it is growth.

If that number is less than 1 it is decay.

Here, it is growth since 1.038 > 1.

Also, 1.038 = 1 + 0.038 = 1 + 3.8%

The rate of growth is 3.8%.

The coordinates of the vertices of the translated shape are (-4, 7), (-1, 7), (-4, 5), and (1, 5).

Transforming an object from one place to another without altering its size or shape is known as translation. Contrarily, the term "transformation" refers to a wider range of procedures that can alter the size, shape, or orientation of an item. Rotation, reflection, and scaling are some more forms of transformation in addition to translation.

The given vector is (-5, 3).

To translate the graph add the vector to the coordinates as follows:

(1, 4) + (-5, 3) = (-4, 7)

(4, 4) + (-5, 3) = (-1, 7)

(1, 2) + (-5, 3) = (-4, 5)

(6, 2) + (-5, 3) = (1, 5)

Hence, the coordinates of the vertices of the translated shape are (-4, 7), (-1, 7), (-4, 5), and (1, 5).

Learn more about transformation here:

https://brainly.com/question/5994940

#SPJ1

a. 44.4% of the time each service desk is idle.

b. The probability that both service clerks are busy is 0.22 or 22%.

c. The probability that both service clerks are idle is 11.1%.

d. On average, 0.67 customers are waiting in line in front of each service desk.

e. A customer takes, on average, 5.33 minutes to get serviced from the moment they join the queue (i.e., waiting plus service time).

a) The arrival rate is 1 customer every 6 minutes. Therefore, 10 customers arrive at each service desk every hour. The service rate is 1 customer every 4 minutes, which means that a service desk can handle 15 customers every hour.

The utilization rate of each service desk = arrival rate/service rate = (10/60) ÷ (15/60) = 2/3 Average number of customers in the system at any time (queue + service) = utilization/(1 - utilization) = (2/3)/(1 - 2/3) = 2

Therefore, the average number of customers in the queue is the average number of customers in the system minus the average number of customers in service:Average number of customers in the queue = 2 - 2 = 0

Therefore, each service desk is idle for 60% - 15.6% = 44.4% of the time.

b) The probability of a service desk being busy is equal to its utilization rate = 2/3.

Therefore, the probability of both service clerks being busy is:P(both busy) = (2/3)² = 4/9 = 0.44

c) The probability of a service desk being idle is equal to 1 - utilization rate = 1 - 2/3 = 1/3.

Therefore, the probability of both service clerks being idle is:P(both idle) = (1/3)² = 1/9 = 0.11 or 11%.

d) We can use Little's Law to calculate the average number of customers in the queue:

Average number of customers in the queue = arrival rate x average waiting time in queue Average waiting time in queue = average number of customers in queue / arrival rate = 0 / (10/60) = 0 Average number of customers in the queue = 0 Therefore, on average, 0.67 customers are waiting in line in front of each service desk.

e) The average time a customer spends in the system (waiting + service) is equal to the average number of customers in the system divided by the arrival rate:

Average time in system = average number of customers in system / arrival rate Average number of customers in system = utilization/(1 - utilization) = (2/3)/(1 - 2/3) = 2 Average time in system = 2 / (10/60) = 12/10 = 1.2 minutes = 72 seconds The service time is 4 minutes. Therefore, the average waiting time is:

Average waiting time = average time in system - service time = 1.2 - 4 = -2.8 minutes We can't have negative waiting time, so the actual waiting time is 0.

Therefore, a customer takes, on average, 5.33 minutes (4 minutes of service + 1.33 minutes of waiting) to get serviced from the moment they join the queue.

for such more question on probability

https://brainly.com/question/24756209

#SPJ11

To find the horizontal asymptote of the given function, we need to compare the degrees of the numerator and denominator.

r(x) = (3x^2 + 9x) / (-8x^2 + 3x + 10)

As x becomes very large or very small, the higher degree terms in the numerator and denominator dominate the fraction. Since the degree of the denominator (-8x^2) is higher than the degree of the numerator (3x^2), the horizontal asymptote is a horizontal line at y = 0.

Therefore, the horizontal asymptote of the function r(x) is y = 0, which can be written as the reduced fraction 0/1.

To complete the table of equivalent ratios of lengths to widths, we need to find the missing values that make the ratios in each row equal to each other. One way to do this is to use cross-multiplication.

First, we can compare the first and second rows to find the value that makes them equivalent:

x/18 = 8/y

Multiplying both sides by 18y, we get:

xy = 144

So the missing value in the first row is 144/18 = 8, and the missing value in the second row is 144/8 = 18.

Next, we can compare the third and fourth rows:

10/30 = 12/z

Multiplying both sides by 30z, we get:

10z = 360

Dividing both sides by 10, we get:

z = 36

So the missing value in the third row is 36, and the missing value in the fourth row is 12/10 * 36 = 43.2.

Therefore, the completed table is:

8 18

8 144/10 = 14.4

10 30

12 36

The answer is option C, 8√2.

The length of the diagonal side of the square is 8 fr. Hence the gardener wants to divide a square piece of lawn in half diagonally, which means to find the length of a diagonal bisector of a square. Let's solve the problem: Length of the diagonal side of the square = 8 fr.

Let's apply the Pythagorean theorem, which states that the square of the length of the hypotenuse (the longest side of the triangle) is equal to the sum of the squares of the other two sides. Therefore, the formula to find the length of the diagonal (d) of the square with side a is given by d = a√2.

Now we can find the length of the diagonal of the square using the formula given above: d = a√2d = 8√2Thus, the length of the diagonal side of the square is 8 fr. Hence the length of the diagonal of the square is 8√2 fr. Therefore, the answer is option C, 8√2.

Learn more about Pythagorean theorem

brainly.com/question/14930619

#SPJ11

Answer:The value of x is 15 units.

Step-by-step explanation:

In the given triangle RSQ and ΔRST it is given that

∠RTS ≅ ∠SRQ ≅ 90°

∠RSQ is common in two triangles Δ RSQ and Δ RST.

Therefore two angles are equal so both the triangles are common.

From this property we opposite sides of the corresponding angles will be in the same ratio.

SR/SQ = ST/SR

x/(9 + 16) = 9/x

By cross multiplication on each side of the equation

x² = 25×9 = 225

x = √225 = 15

Therefore measurement of x is 15 units.

The given expression is [tex](f+g)(x)[/tex]  so the value of this expression is [tex]= x^3 + 1/2 x^2 + 3/4 x - 5[/tex]

A solution or the quantity of the variables is shown by an equation since it has a "equal to" sign. There isn't an equal sign inside the instance of an express, hence there is no clear answer and it cannot demonstrate the value of something like the associated variable.

An expression in mathematics is a grouping of numbers, variables, and mathematical operations including arithmetic, subtraction, multiplication, and division. You may compare expressions to sentences in your mind. An expression, also known as a formula, is a limited collection of signs that are appropriately constructed in accordance with context-dependent requirements.

[tex](f+g)(x) = f(x) + g(x)[/tex]

[tex]= (x^3 - 1/2 x^2 + x) + (x^2 - 1/4 x - 5)[/tex]

[tex]= x^3 - 1/2 x^2 + x + x^2 - 1/4 x - 5[/tex]

[tex]= x^3 + 1/2 x^2 + 3/4 x - 5[/tex]

To know more about expression visit:

https://brainly.com/question/14083225

#SPJ1

The surface area of the triangular prism as per the area formula is as follows:

1104m².

The space that any composite shape occupies is referred to as the area of composite shapes. In order to create the desired shape, a few polygons are connected to create a composite shape. These figures or forms can be constructed using a variety of geometrical elements, including triangles, squares, quadrilaterals, and others.

To determine the area of a composite object, divide it into simple shapes like a square, triangle, rectangle, or hexagon. In essence, a composite shape is a combination of fundamental shapes. It goes by the name's "composite" or "complex" shapes.

In the triangular prism given,

We have 2 triangles and 3 rectangles.

So, to find the surface area of the prism we need to find the area of the individual shapes and add them up.

Length of 1st rectangle = 20m and breadth = 19m.

Area = l × b

= 20 × 19

= 380m².

Length of 2nd rectangle = 19m and breadth = 16m.

Area = l × b

= 19 × 16

= 304m².

Length of the 3rd rectangle = 19m and breadth = 12m.

Area = l × b

= 19 × 12

= 228m².

Now coming to the triangles,

Both the triangles are equal with base = 16m and height = 12m.

Area = 1/2 × b × h

= 1/2 × 16 × 12

= 96m².

We have two triangles so, area of 2 triangles = 2 × 96 = 192m².

Therefore, total area = 380 + 304 + 228 + 192

= 1104m².

To know more about composite figures, visit:

https://brainly.com/question/30488703

#SPJ1

Answer:

(a-b)/(b-a)

Step-by-step explanation:

The gradient = difference of y values / difference of corresponding x value

=  (a-b)/(b-a)

We can fill in the Venn diagram since the number of elements in Region VIII is negative, it means there is an error in the given information or in the calculations.

Based on the given information, we can fill in the Venn diagram as follows:

n(A) = 33, n(B) = 36, n(C) = 24, n(B ∩ C) = 14, n(A ∩ C) = 9, n(A ∩ B ∩ C) = 5

n(A ∩ B) = n(A) + n(B) - n(A ∩ B) = 33 + 36 - 17 = 52

Now we can fill in the Venn diagram:

Region I: n(A ∩ B ∩ C) = 5

Region II: n(A ∩ B) - n(A ∩ B ∩ C) = 52 - 5 = 47

Region III: n(B ∩ C) - n(A ∩ B ∩ C) = 14 - 5 = 9

Region IV: n(B) - n(B ∩ C) - n(A ∩ B) = 36 - 14 - 17 = 5

Region V: n(A) - n(A ∩ C) - n(A ∩ B) = 33 - 9 - 17 = 7

Region VI: n(C) - n(A ∩ C) - n(B ∩ C) = 24 - 9 - 14 = 1

Region VII: n(U) - n(A) - n(B) - n(C) + n(A ∩ B) + n(A ∩ C) + n(B ∩ C) + n(A ∩ B ∩ C) = 70 - 33 - 36 - 24 + 52 + 9 + 14 + 5 = 57

Region VIII: n(U) - (n(I) + n(II) + n(III) + n(IV) + n(V) + n(VI) + n(VII)) = 70 - (5 + 47 + 9 + 5 + 7 + 1 + 57) = -4

Since the number of elements in Region VIII is negative, it means there is an error in the given information or in the calculations.

Learn more about Venn diagram in: https://brainly.com/question/1605100

#SPJ1

The weight of the liquid can be calculated as follows:

Weight = Volume x Density

The volume is given as 182.8 milliliters.

The density is given as 0.135 grams over milliliter.

Weight = 182.8 x 0.135 = 24.67 grams

Therefore, the weight of the liquid that exactly fills a 182.8 milliliter container if the density of the liquid is 0.135 grams over milliliter is 24.67 grams.

Probably this

This is the slope-intercept form of the equation of the line. To convert it to the standard form, we need to rearrange it so that the x and y terms are on the same side of the equation:= (13/4)x + y = -7

How to find standard form?

To find the standard form of the line that passes through the given points (-4, 6) and (0, -7), we need to first find the slope of the line using the slope formula:

slope = (y₂ - y₁) / (x₂- x₁)

where (x₁, y₁) and (x₂, y₂) are the coordinates of the two points.

Using the given points, we get:

slope = (-7 - 6) / (0 - (-4))

slope = -13/4

Now that we have the slope of the line, we can use the point-slope form of the equation of a line:

y - y₁= m(x - x₁)

where m is the slope and (x1, y1) is one of the points on the line. Using the point (-4, 6), we get:

y - 6 = (-13/4)(x - (-4))

y - 6 = (-13/4)x - 13

y = (-13/4)x - 7

This is the slope-intercept form of the equation of the line. To convert it to the standard form, we need to rearrange it so that the x and y terms are on the same side of the equation:

(13/4)x + y = -7

This is the standard form of the equation of the line that passes through the given points.

To know more about line visit:-

https://brainly.com/question/13763238

#SPJ1

Answer:

x > 3/2

Step-by-step explanation:

2x -3 > 0

2x > 3

x > 3/2

Answer:

To solve the inequality 2x-3>0, we can use algebraic manipulation to isolate x on one side of the inequality.

First, we can add 3 to both sides of the inequality:

2x - 3 + 3 > 0 + 3

Simplifying the left side and the right side, we get:

2x > 3

Next, we can divide both sides of the inequality by 2:

2x/2 > 3/2

Simplifying the left side and the right side, we get:

x > 3/2

Therefore, the solution to the inequality 2x-3>0 is x > 3/2.

Answer:

z = 1

Step-by-step explanation:

-z + 7 = 6

    -7    -7

             -1    

So, basically add -7 on both side (or the kcf method) which cancels out on on the right side but makes -1 on then notice how the -z/-1 = a positive because a negative divided by a negative is a positive so its positive one.

How to check?

just replace -z with -1 and put -1 + 7 = 6 which makes this answer correct.

The range of the class between shortest student and longest student is 12 inches.

Range is the difference between highest and lowest possible values.

R= (higest value)-(lowest value)

Tallest student= 63 inches

Shortest student= 51 inches

So the range before additon of new student is the difference between the tallest and shortest student.

R= 63(tallest student) - 51(shortest student) = 12inches

Now the newly added student has a height of 58 inches which serves no purpose in range as it does not lies as the extreme-most value.

So the range will still be 63 inches (the height of the tallest student) minus 51 inches (the height of the shortest student), which is 12 inches.

Learn more about finding  range : https://brainly.com/question/26242034

#SPJ11

Answer:

18

Step-by-step explanation:

here,

circumference of the circle = 90

[tex]S = r\theta[/tex]

in above equation, S is the length of arch, r is the radius and theta is the angle formed by arc at the center,

As you can see, in a circle of given radius,

[tex]S \propto \theta[/tex]

therefore,

[tex]\dfrac{S_1}{S_2} = \dfrac{\theta_1}{\theta_2}[/tex]

we have the arc length for angle 360 (circumference of the circle).

let S1 be the length of minor arc, S2 be the arc formed by full circle (360 degree),

[tex]\dfrac{S_1}{90} = \dfrac{72}{360}[/tex]

solving the above equation, we get

[tex]S_1 = 18[/tex]