En una ciudad se midió la temperatura a las 7:00 am y el valor fue de 15°C, luego se midió a las 3:00 pm el valor fue de 24°C. Partiendo del nivel de medición de esta variable, en qué proporción excede una temperatura de la otra, analice su respuesta.

Answers

Answer 1

The proportion by which the later temperature exceeds the earlier temperature is 3/5 or 3:5.

In what proportion does one temperature exceed the other?

To determine the proportion by which one temperature exceeds the other, we need to calculate the difference between the two temperatures and express it as a proportion of the starting temperature.

First, calculate the temperature difference between 7:00 am and 3:00 pm:

temperature difference = 24°C - 15°C = 9°C

Now, express the temperature difference as a proportion of the starting temperature (15°C).

Proportion = Temperature difference / Starting temperature

Proportion = 9/15

Proportion = 3/5

Learn more about proportion on:

brainly.com/question/1781657

#SPJ1

Question in English

In a city the temperature was measured at 7:00 am and the value was 15°C, then it was measured at 3:00 pm the value was 24°C. Starting from the level of measurement of this variable, in what proportion does one temperature exceed the other, analyze your answer.


Related Questions

Giraffe jack is 19ft tall, and ostrich Jim is 9ft tall. What percent of Jim’s height is jacks height?

Answers

Answer:

211%

Step-by-step explanation:

percent = part/whole × 100%

percent = 19/9 × 100%

percent = 211%

Hi I could use some help with this question, thank you in advance.​
apologies for mislabeling this as college

Answers

Using the property of vertical angles, the value of x is 24 degrees

What are vertical angles?

Vertical angles are a pair of non-adjacent angles formed by the intersection of two lines. They are opposite each other and share a common vertex, but they are not adjacent angles.

When two lines intersect, they form four angles at the point of intersection. The vertical angles are the angles that are directly across from each other and are formed by opposite pairs of intersecting lines. In other words, if you draw a line segment connecting the vertices of the vertical angles, it will divide the intersection into two pairs of congruent angles.

The property of vertical angles is that they have equal measures. This means that if one vertical angle measures a certain number of degrees, the other vertical angle will also measure the same number of degrees.

In this problem, to find the value of x, we have to use the property of vertical angles which states that vertical angles are equal to one another.

This implies that ∠ABC = DBE

3x - 14 = 2x + 10

Collect like terms

3x - 2x = 10 + 14

x = 24°

The answer is option D.

Learn more on vertical angles here;

https://brainly.com/question/1673457

#SPJ1

When is it better to have a session pass versus just paying general admission?

After 8 visits: How much would each person pay? Show your work for calculations.

Session Pass______? General Admission______?

After 10 visits: How much would each person pay? Show your work for calculations.

Session pass _____? General Admission_____?

Answers

After 8 visits: General Admission: Each person would pay $200. Annual Public Session Pass: Each person would pay $299.

After 10 visits: General Admission: Each person would pay $250. Annual Public Session Pass: Each person would still pay $299.

To determine when it is better to have a session pass versus just paying general admission, we need to compare the costs for each option.

General Admission with skate rental: $25

Annual Public Session Pass with skate rental: $299

After 8 visits:

For General Admission, the cost per visit would be $25 per visit.

Total cost for 8 visits: $25 x 8 = $200

For the Annual Public Session Pass, the cost is a one-time payment of $299, regardless of the number of visits. Therefore, after 8 visits, the cost remains the same at $299.

Therefore, after 8 visits, it would be more cost-effective to have the Annual Public Session Pass as the cost per person would be $299.

After 10 visits:

For General Admission, the cost per visit remains at $25 per visit.

Total cost for 10 visits: $25 x 10 = $250

For the Annual Public Session Pass, the cost remains the same at $299, regardless of the number of visits.

Therefore, after 10 visits, it would still be more cost-effective to have the Annual Public Session Pass as the cost per person would still be $299.

For such more question on Annual:

https://brainly.com/question/28990623

#SPJ8

The following question may be like this:

When is it better to have a session pass versus just paying general admission? After 8 visits: How much would each person pay? Show your work for calculations. Session Pass______? General Admission______?After 10 visits: How much would each person pay? Show your work for calculations.Session pass _____? General Admission_____?

GENERAL ADMISSION WITH SKATE RENTAL  $25

ANNUAL PUBLIC SESSION PASS WITH SKATE RENTAL $299

LOCKER RENTAL-ONE TIME USE  $5

HELMET RENTAL  $5

SKATE HELPER-PER HOUR $15

Which equation represents a line which is perpendicular to the line y = - 6/5 * x - 7

Answers

An equation representing a line perpendicular to y = -6/5 [tex]\times[/tex] x - 7 would be y = 5/6 [tex]\times[/tex] x + c, where c is any constant.

To determine a line that is perpendicular to the given line y = -6/5 [tex]\times[/tex] x - 7, we need to consider the slope of the given line.

The given line has a slope of -6/5.

For two lines to be perpendicular, their slopes must be negative reciprocals of each other.

The negative reciprocal of -6/5 can be found by flipping the fraction and changing the sign, which gives us 5/6.

Therefore, the equation of a line perpendicular to y = -6/5 [tex]\times[/tex] x - 7 will have a slope of 5/6.

To find the equation of this perpendicular line, we can use the point-slope form of a line, using a known point on the line.

Let's assume the line passes through the point (x1, y1).

The equation of the perpendicular line can be written as: y - y1 = (5/6) [tex]\times[/tex] (x - x1).

Since we do not have a specific point given, we cannot determine the exact equation of the perpendicular line without additional information.

In summary, the equation of a line perpendicular to y = -6/5 [tex]\times[/tex] x - 7 will have a slope of 5/6, but the specific equation depends on the point it passes through.

For similar question on perpendicular.

https://brainly.com/question/1202004  

#SPJ8

Utility company charges.10 cents per kilowatt-hour of electricity what is the daily cost of keeping lit a 50 watt bulb for 9hrs each day

Answers

The daily cost of keeping a 50-watt bulb lit for 9 hours each day would be approximately $0.045 (or 4.5 cents).

To calculate the daily cost of keeping a 50-watt bulb lit for 9 hours each day, we need to consider the electricity cost per kilowatt-hour (kWh) and convert the wattage to kilowatts.

First, we convert the wattage of the bulb to kilowatts by dividing it by 1000:

50 watts = 50/1000 = 0.05 kilowatts.

Next, we calculate the total energy consumed by multiplying the power (in kilowatts) by the time (in hours):

Total energy consumed = 0.05 kW * 9 hours = 0.45 kilowatt-hours (kWh).

Now, we multiply the total energy consumed by the cost per kilowatt-hour to find the daily cost:

Daily cost = 0.45 kWh * $0.10/kWh = $0.045.

For more such questions on cost

https://brainly.com/question/29509552

#SPJ8

15
25
15
23
15
23
17
21
21
19
15
a.) The standard deviation is(round to two decimal places)
b.) The variance is(round to one decimal place)

c.) The range is

Answers

The answer is b Explanation; the variance has to be rounded to one decimal place

Pls help I am stuck Tysm

Answers

Answer:

16cm

Step-by-step explanation:

perimeter for C is 44cm

perimeter for A and B 60cm

60cm-44cm=16cm

Hope this helps

Question 9(Multiple Choice Worth 2 points)
(Theoretical Probability MC)
A fair, 6-sided die is rolled 50 times. Predict how many times it will land on a number greater than 3.


1/2
5
25
50

Answers

Answer:

A 1/2

Step-by-step explanation:

was on my test trust me on this one

1/2
On the dice there are six outcome (1,2,3,4,5,6)
1.3.5 - odd
2,4,6 - even
Therefore half of them are even outcomes
Even chance = 1/2
Hope this helps!

NO LINKS!! URGENT HELP PLEASE!!
Please help with #3

Answers

Answer:  See the flowchart proof below.

Explanation:

The given info is indicated by the marked angles. We also use the reflexive property to say that BG = BG. After that we use the ASA (angle side angle) property to prove the triangles are congruent. The triangles are mirrored clones of one another. The mirror line is segment BG.

A flowchart proof that proves that the two triangles are congruent is shown in the image below.

What are the properties of similar triangles?

In Mathematics and Geometry, two triangles are said to be similar when the ratio of their corresponding side lengths are equal and their corresponding angles are congruent.

In this context, we can prove that triangle BIG is congruent with triangle BAG by completing the two-column proof shown above with the following reasons:

Statements                                Reasons

∠IBG ≅ ∠ABG                              Given

∠IGB ≅ ∠AGB                              Given

BG ≅ BG                               Reflexive property

ΔBIG ≅ ΔBAG                       ASA Congruence

Based on the angle, side, angle (ASA) similarity theorem, we can logically deduce that triangle BIG and triangle BAG are both congruent.

Read more on triangle here: brainly.com/question/9858556

#SPJ1

17 students are present in a class. in how many ways ,they can be made to stand in 2 circles of 8 and 9 students

Answers

Answer:

24310

Step-by-step explanation:

17 choose 8= 17 choose 9

17 choose 8= 17*16*15*14*13*12*11*10/8!= 24310

write the first five multiples of 17​

Answers

Step-by-step explanation:

write the first five multiples of 17​

17 x 1 = 1717 x 2 = 3417 x 3 = 5117 x 4 = 6817 x 5 = 85

Therefore, the first five multiples of 17 are 17 , 34 , 51 , 68 and 85 .

(−x² − 1) ÷ (x + 1)
Help

Answers

The simplified form of the expression (-X2-1) ÷ (x + 1) is -x - 1 - 2/(x+1).

(24)³-(13)³-(11)³ Without actually calculating the cubes, evaluate.​

Answers

By applying the algebraic identity, the expression (24)³ - (13)³ - (11)³ can be simplified as (11)(1057) - (11)³ = 10396, without actually calculating the cubes.

How to Evaluate the expression without Calculating the Cubes?

The expression (24)³ - (13)³ - (11)³ can be evaluated without calculating the cubes by applying the concept of algebraic identities.

By using the identity (a³ - b³) = (a - b)(a² + ab + b²), we can rewrite the expression as (24 - 13)(24² + 24*13 + 13²) - (11)³.

Simplifying further, we have (11)(576 + 312 + 169) - (11)³.

Combining like terms, the expression evaluates to (11)(1057) - (11)³.

Finally, we can simplify to obtain the result of 11 multiplied by 1057 minus 11 cubed, without actually calculating the cubes. The simplified expression (24)³ - (13)³ - (11)³ evaluates to 10396.

Learn more about Evaluation without Calculating Cubes on:

https://brainly.com/question/18040006

#SPJ1

Deacon Company is a merchandising company that is preparing abudget for the three-month period ended June 30th. The followinginformation is availableDeacon CompanyBalance SheetMarch 31AssetsCash$60,200 Accounts receivable $30,800Inventory $60,400Buildings and equipment, net of depreciation $124,000Total assets$295,400Liabilities and Stockholders’EquityAccounts payable$71,100Common stock 70,000Retained earnings $134,300Total liabilities and stockholder...

Answers

The total liabilities and stockholders' equity for Deacon Company as of March 31st is $275,400.

To calculate the total liabilities and stockholders' equity, we need to add the amounts of accounts payable, common stock, and retained earnings. Accounts Payable: The balance sheet provides the information that the accounts payable is $71,100.

Common Stock: The balance sheet states that the common stock is $70,000.

Retained Earnings: The balance sheet shows that the retained earnings are $134,300.

Calculate the total liabilities and stockholders' equity: Add the amounts of accounts payable, common stock, and retained earnings.

Total liabilities and stockholders' equity = Accounts payable + Common stock + Retained earnings

= $71,100 + $70,000 + $134,300

= $275,400

Therefore, the total liabilities and stockholders' equity for Deacon Company as of March 31st is $275,400.

For more such questions on liabilities and stockholders' equity, click on:

https://brainly.com/question/30544688

#SPJ8

please help me !!!!!!!

Answers

Answer:

F(5)= -1

if 5 is the value on the x axis it corresponds to -1 on the y axis

What is the solution to the system of equations graphed below?
A. (0, -1)
OB. (0,1)
OC. (-1,0)
D. (1,0)
S
PRE
y=-x-1
y=x+1
y=x+1
y=-x-1

Answers

The point of intersection is (-1, 0). Therefore, the correct answer is C. (-1, 0).

To find the solution to the system of equations graphed below, we need to identify the point where the two lines intersect.

The equations of the lines are:

y = -x - 1

y = x + 1

To find the point of intersection, we can set the two equations equal to each other and solve for x:

-x - 1 = x + 1

Adding x to both sides:

-1 = 2x + 1

Subtracting 1 from both sides:

-2 = 2x

Dividing both sides by 2:

x = -1

Now that we have the x-coordinate, we can substitute this value back into either equation to find the y-coordinate. Let's use the second equation:

y = x + 1

y = -1 + 1

y = 0

Therefore, the point of intersection is (-1, 0).

Among the given options, the closest point to (-1, 0) is option C: (-1, 0).

Therefore, the correct answer is C. (-1, 0).

for such more question on intersection

https://brainly.com/question/11337174

#SPJ8

NO LINKS!! URGENT HELP PLEASE!!!

1. Find the sum of the measures of the interior angles of the indicated polygons. (NOT MULTIPLE CHOICE)
a. heptagon

b. 13-gon

2. The sum of the measures of the interior angles of a convex polygon is 1260°. Classify the polygon by the number of sides.

Answers

1a. Sum of interior angles of a heptagon:

[tex]\displaystyle \sf \text{Sum of interior angles} = (7 - 2) \times 180^\circ = 900^\circ[/tex]

1b. Sum of interior angles of a 13-gon:

[tex]\displaystyle \sf \text{Sum of interior angles} = (13 - 2) \times 180^\circ = 1980^\circ[/tex]

2. Number of sides for a polygon with a sum of interior angles of 1260°:

[tex]\displaystyle \sf (n - 2) \times 180^\circ = 1260^\circ[/tex]

[tex]\displaystyle \sf n - 2 = \frac{1260^\circ}{180^\circ}[/tex]

[tex]\displaystyle \sf n - 2 = 7[/tex]

[tex]\displaystyle \sf n = 7 + 2 = 9[/tex]

Therefore, the sum of the measures of the interior angles of a heptagon is 900°, the sum of the measures of the interior angles of a 13-gon is 1980°, and the polygon with a sum of interior angles of 1260° is a nonagon (9-gon).

[tex]\huge{\mathfrak{\colorbox{black}{\textcolor{lime}{I\:hope\:this\:helps\:!\:\:}}}}[/tex]

♥️ [tex]\large{\underline{\textcolor{red}{\mathcal{SUMIT\:\:ROY\:\:(:\:\:}}}}[/tex]

Answer:

1. a. 900°       b. 1980°

2. Nonagon

Step-by-step explanation:

In order to find the interior angles of a polygon, use the formula,

Sum of interior angles = (n-2)*180°

For

a. Heptagon

no of side =7

The sum of the interior angles of a heptagon:

(7-2)*180 = 900°

b. 13-gon

no. of side =13

The sum of the interior angles of a 13-gon:
(13-2)*180 = 1980°

2.

The sum of the interior angles of a convex polygon is 1260°,

where n is the number of sides.

In this case, we have

1260 = (n-2)*180

1260/180=n-2

n-2=7

n=7+2

n=9

Therefore, the polygon has 9 sides and is classified as a nonagon.

A fish tank is 50 cm long and 40 cm wide and 20 cm high how many millimeters of water does the tank hold

Answers

Answer:

The fish tank holds 40,000 ml of water.

Step-by-step explanation:

Volume = Length x Width x Height

Volume = 50 x 40 x 20

Volume = 40,000

Si 3,390 kg de plomo ocupan un volumen de 0.3m3. Encuentra la densidad del plomo.

Answers

The density of lead is 11,300 kg/[tex]m^3[/tex], which means that lead is a dense material with a significant mass per unit volume.

To find the density of lead, we can use the formula:

Density = Mass / Volume

Given that the mass of lead is 3,390 kg and the volume is 0.3 [tex]m^3[/tex], we can substitute these values into the formula:

Density = 3,390 kg / 0.3[tex]m^3[/tex]

To simplify the calculation, we divide the mass by the volume:

Density = 11,300 kg/[tex]m^3[/tex]

Therefore, the density of lead is 11,300 kg/[tex]m^3[/tex].

Density is a physical property of a substance that describes how much mass is packed into a given volume. In this case, the density of lead tells us that for every cubic meter of lead, there are 11,300 kilograms of mass.

It is important to note that the density of lead is a characteristic property and remains constant regardless of the size or shape of the sample. It is a useful parameter in various scientific and industrial applications.

For more such information on: density

https://brainly.com/question/1354972

#SPJ8

The question probable may be:

If 3,390 kg of lead occupy a volume of 0.3 m^3, find the density of lead.

A merchant could sell one model of digital cameras at list price and receive $432 for all of them. If he had three more cameras, he could sell each one for $12 less and still receive $432. Find the list price of each camera.

Answers

The list price of each camera is approximately $26.59.

Let's assume the list price of each camera is represented by 'x'.

According to the given information, the merchant sold a certain number of cameras at the list price and received a total of $432. This can be expressed as:

Number of cameras * List price = Total revenue

x * Number of cameras = $432

Now, if the merchant had three more cameras and sold each one for $12 less, the new selling price would be (x - $12). The total revenue would still be $432. This can be expressed as:

(New number of cameras) * (New selling price) = Total revenue

(x + 3) * (x - $12) = $432

Expanding the equation:

x^2 - $12x + 3x - $36 = $432

x^2 - 9x - $468 = 0

To solve this quadratic equation, we can factor it or use the quadratic formula. Factoring this equation may not yield integer solutions, so we'll use the quadratic formula:

x = (-b ± √(b^2 - 4ac)) / (2a)

For our equation, a = 1, b = -9, and c = -468. Plugging these values into the quadratic formula:

x = (-(-9) ± √((-9)^2 - 4 * 1 * (-468))) / (2 * 1)

x = (9 ± √(81 + 1872)) / 2

x = (9 ± √(1953)) / 2

Calculating the square root of 1953 gives us approximately 44.17. Therefore, the two possible values for x are:

x1 = (9 + 44.17) / 2 ≈ 26.59

x2 = (9 - 44.17) / 2 ≈ -17.59

Since the price of a camera cannot be negative, we discard x2. Therefore, the list price of each camera is approximately $26.59.

For more question on price visit:

https://brainly.com/question/29023044

#SPJ8

Find the regression line associated with the set of points. (Round all coefficients to four decimal places.) HINT [See Example 2.] (4, 6), (6, 10), (10, 14), (12, 2) y(x) =

Answers

The y-intercept, b, can be calculated as:

b = (Σy - mΣx) / n

To find the regression line associated with the set of points (4, 6), (6, 10), (10, 14), and (12, 2), we can use the least squares method. The regression line represents the best-fit line that minimizes the sum of the squared differences between the observed y-values and the predicted y-values on the line.

The equation for the regression line, y(x), can be written in the form y = mx + b, where m is the slope of the line and b is the y-intercept.

Using the given points, we can calculate the slope, m, and the y-intercept, b, to obtain the equation of the regression line.

The slope, m, is calculated as:

m = (nΣxy - ΣxΣy) / (nΣ[tex]x^2[/tex] - (Σ[tex]x)^2[/tex])

where n is the number of points, Σxy is the sum of the product of x and y values, Σx is the sum of the x-values, and Σy is the sum of the y-values.

Similarly, the y-intercept, b, can be calculated as:

b = (Σy - mΣx) / n

By substituting the given values into the formulas and performing the calculations, the equation for the regression line can be obtained.

For more such answers on Intercept

https://brainly.com/question/24212383

#SPJ8

Work out the value of 408 5
Give your answer as a decimal.

Answers

The value of 408^5 is approximately 273,539,283,056,896. This is a large number that can be accurately calculated using a calculator or computer program.

To work out the value of 408^5, we need to perform the exponentiation calculation. In this case, 408 is the base, and 5 is the exponent.

Calculating large exponentiations like this can be time-consuming and prone to error if done manually. However, with the help of a calculator or computer, we can easily find the result.

Using a calculator or computer program, we can calculate 408^5 and obtain the value. The result is a very large number:

408^5 ≈ 273,539,283,056,896

Therefore, the value of 408^5 is approximately 273,539,283,056,896.

In decimal notation, the value is written as:

273,539,283,056,896

For more such question on value. visit :

https://brainly.com/question/843074

#SPJ8

Compute $2^{-3}\cdot 3^{-2}$.

Answers

The value of the algebric  expression [tex]2^{-3} \cdot 3^{-2}$ is $\frac{1}{72}[/tex].

To compute the expression [tex]2^{-3} \cdot 3^{-2}[/tex], we can simplify each term separately and then multiply the results.

First, let's simplify [tex]2^{-3}[/tex]. The exponent -3 indicates that we need to take the reciprocal of the base raised to the positive exponent 3. Therefore, [tex]2^{-3} = \frac{1}{2^3} = \frac{1}{8}[/tex].

Next, let's simplify 3^{-2}. Similar to before, the exponent -2 means we need to take the reciprocal of the base raised to the positive exponent 2. So, [tex]3^{-2} = \frac{1}{3^2} = \frac{1}{9}[/tex].

Now that we have simplified both terms, we can multiply them together: [tex]\frac{1}{8} \cdot \frac{1}{9}[/tex]. When multiplying fractions, we multiply the numerators together and the denominators together. So, [tex]\frac{1}{8} \cdot \frac{1}{9} = \frac{1 \cdot 1}{8 \cdot 9} = \frac{1}{72}[/tex].

For more such questions on  algebric  expression visit:

https://brainly.com/question/4541471

#SPJ8

There are 10 balls with different sizes. You take 4 random balls out of the 10 balls each time and then put them back. What is the probability that you will take the smallest ball at least once during 4 tries?

Answers

The probability of taking the smallest ball at least once during 4 tries can be calculated as 1 minus the probability of not taking the smallest ball in any of the 4 tries. Since each try is independent and the probability of not taking the smallest ball in a single try is 9/10, the probability of not taking it in all 4 tries is (9/10) * (9/10) * (9/10) * (9/10) = 0.6561. Therefore, the probability of taking the smallest ball at least once during 4 tries is 1 - 0.6561 = 0.3439, or approximately 34.39%.

To find the probability of not taking the smallest ball in any of the 4 tries, we need to calculate the probability of not selecting the smallest ball in each try and then multiply them together.

In each try, there are 9 balls remaining that are not the smallest ball, out of a total of 10 balls. Therefore, the probability of not taking the smallest ball in a single try is 9/10.

Since the tries are independent events, we can multiply the probabilities together to find the probability of not taking the smallest ball in all 4 tries.

After calculating this probability, we subtract it from 1 to obtain the probability of taking the smallest ball at least once during the 4 tries.

In this case, the probability of not taking the smallest ball in all 4 tries is (9/10) * (9/10) * (9/10) * (9/10) = 0.6561.

Finally, subtracting this value from 1 gives us the probability of taking the smallest ball at least once, which is 1 - 0.6561 = 0.3439, or approximately 34.39%.

for such more questions on  probability

https://brainly.com/question/251701

#SPJ8

Solve 4563÷257 using long division method show the steps ​

Answers

2 5 7 ÷ 4 5 6 3

- 2 5 7

1993

- 1 7 9 9

Answer:

194

A package is weighed at 11 kg to the nearest kg. Find the largest possible weight for the package.​

Answers

The largest possible weight for the package is 11.5 kg.

To find the largest possible weight for the package, we need to consider the range within which the weight lies when rounded to the nearest kilogram.

When the package is weighed at 11 kg to the nearest kilogram, it means the actual weight could be anywhere between 10.5 kg and 11.5 kg. This is because rounding to the nearest kilogram involves considering values halfway between two integers to round up or down.

To determine the largest possible weight, we take the upper limit of this range, which is 11.5 kg. Therefore, the largest possible weight for the package is 11.5 kg.

Keep in mind that when rounding to the nearest kilogram, values from 10.5 kg to 11.4 kg would round down to 11 kg, while values from 11.5 kg to 12.4 kg would round up to 12 kg.

for such more question on weight

https://brainly.com/question/17562784

#SPJ8

The two figures are similar. Write a Similarity statement. Justify your answer. AB 40 AC 50. BC 60. YX 37.5. YZ 30. ZX 45

Answers

Similarity statement and justification for two similar figures with given measurements. The given figures are AB = 40, AC = 50, and BC = 60. For the second figure, YX = 37.5, YZ = 30, and ZX = 45.

To write a similarity statement, we compare the ratios of corresponding sides of the two figures. So, we can compare AB/BC to YX/ZX and AC/BC to YZ/ZX.AB/BC = 40/60 = 2/3YX/ZX = 37.5/45 = 5/6AC/BC = 50/60 = 5/6YZ/ZX = 30/45 = 2/3Since the ratios of the corresponding sides of both figures are the same, we can say that the two figures are similar.

A similarity statement for these figures can be written as:ΔABC ~ ΔXYZThis statement indicates that the two triangles ABC and XYZ are similar. The symbol ~ is used to denote similarity.

The justification for this similarity statement is based on the fact that the ratios of the corresponding sides of the two figures are equal.

Therefore, by the definition of similarity, we can conclude that the two triangles are similar.

For more such questions on measurements

https://brainly.com/question/27233632

#SPJ8

Question 6 of 22 The graph of a function never has two different points with the same x-coordinate because A. the graph of a function cannot be a straight line. • B. each input value is mapped to a single output value • C. the graph of a function is a vertical line. • D. each input value is mapped to more than one output value.

Answers

The correct answer is B. each input value is mapped to a single output value.

In a function, each input value (x-coordinate) is associated with exactly one output value (y-coordinate). This means that for any given x-value, there can only be one corresponding y-value on the graph of a function. Therefore, the graph of a function never has two different points with the same x-coordinate.

given the line y= -6x +5 what is the line nslope and the y - intercept​

Answers

According to slope intersept form : y = mx+b

m is slope and b is y intersept

so y = -6x+5

slope(m) = -6

y intersept = 5

HOPE IT HELPS

PLEASE GIVE BRAINLIEST

2.6m 11m Jenny wants to know if she has got enough money to buy the tiles. 1.4m The tiles are sold in packs, which cover 3m² Jenny has a discount card which gives her 25% off any marked price at the DIY shop. The tiles are marked at £18.60 Jenny has £100 to spend on the tiles. 4 How much extra does Jenny need to buy the tiles? Give your answer in pence.​

Answers

First, we need to calculate the area of the room Jenny is tiling, which appears to be in the shape of a rectangle. The area is calculated by multiplying the length and width of the rectangle. If the measurements provided (2.6m and 11m) are for the length and width, then the area of the room would be:

Area = length x width

Area = 2.6m x 11m

Area = 28.6 m²

Next, we need to calculate how many packs of tiles Jenny needs to buy. Given that each pack covers an area of 3m², we divide the total area by the area each pack covers:

Number of packs needed = total area / area covered by one pack

Number of packs needed = 28.6m² / 3m² ≈ 9.53 packs

Since Jenny can't buy a fraction of a pack, she needs to purchase 10 packs of tiles.

The tiles are marked at £18.60, so before the discount, the total cost of the tiles would be:

Total cost = number of packs x price per pack

Total cost = 10 packs x £18.60 = £186

Jenny has a discount card which gives her a 25% discount off the marked price. The discount amount can be calculated as:

Discount = total cost x discount rate

Discount = £186 x 25% = £46.5

So, the cost of the tiles after the discount is:

Discounted price = total cost - discount

Discounted price = £186 - £46.5 = £139.5

Jenny has £100 to spend on the tiles. The extra amount Jenny needs is the difference between the cost of the tiles after the discount and the amount she has:

Extra amount needed = discounted price - amount Jenny has

Extra amount needed = £139.5 - £100 = £39.5

The question asks for the answer in pence, and there are 100 pence in a pound, so:

Extra amount needed in pence = extra amount needed in pounds x 100

Extra amount needed in pence = £39.5 x 100 = 3950 pence

Therefore, Jenny needs an extra 3950 pence to buy the tiles.

Other Questions
Karen needs a loan of 118000 for a new home. The loan period is 2 years, and the loan payments are made semiannually. The annual interest rate of the annuity loan is 8.2 %.What is the principal payment in the third payment? It has been found that when some family members are engaged incriminal behavior, the children in that home are more likely to doas well. This can be related best to which of the followingtheories? A force vector is positioned in the 6th octant. The projection angle is 37 degrees. The planar angle referenced from the negative x-axis is 53 degrees. The x,y, and z components will be+,-,--,+,+-,-,--,+,--The magnitude of the vector is 10 N. The z component is6 N- 6 N8 N- 8 N The stress relaxation modu us mav oe written as:E(1) = 7 GPa + M exp (-(U0)0.5),where 3.4 GPa is the constant, t is the time, and the relaxation time d is 1 week.When a constant tensile elongation of 6.7 mm is applied, the initial stress is measured as 19MPa. Determine the stress after 1 week (in MPa). find the equation of the line tangent to the graph y=(x^2/4)+1,at point (-2,2) In the industrial chemicals process, many aspects shall be considered in obtaining the targeted products with optimum yield and profit. Among those aspects are stated in the following statement. As an expert in the chemical industry, you are required to evaluate each statement. 1) "Chemical kinetics aspect is not essential in optimizing the yield of the chemical product". ii) "Neither exothermic nor endothermic reaction affect the stability product". chemical iii) "The activation energy (E) characteristic is temperature independence." iv) "One reaction with AG > 0 under standard conditions thermodynamically do not occur spontaneously, but can be made to occur under n-standard conditions". A 1.2 kg ball of clay is thrown horizontally with a speed of 2 m/s, hits a wall and sticks to it. The amount of energy stored as thermal energy is How much heat, in calories, does it take to warm960gof iron from12.0Cto45.0C? Express your answer to three significant figures and include the appropriate units. In this process, acrylic acid (AA) is produced through the oxidation of propylene at 300C and2.57 atm with water as the by-product. In a year, this chemical plant operates 24 hours a dayfor 330 working days, with a total production of 250,000 metric tonnes of AA. The main productis AA, while the side products are acetic acid (ACA), water (H2O), and carbon dioxide (CO2).The selectivity of AA over ACA is 16 and the conversion of propylene to the side reaction 2 ishalf of the side reaction 1. Details of the reaction are as follows:C3H6 (g) + 1.5O2 (g) C3H4O2 (v) + H2O (v) (Main reaction)C3H6 (g) + 2.5O2 (g) C2H4O2 (v) + CO2 (g) + H2O (v) (Side reaction 1)C3H6 (g) + 4.5O2 (g) 3CO2 (g) + 3H2O (v) (Side reaction 2)Pure oxygen is added to a recycle stream containing a mixture of carbon dioxide and oxygenbefore being fed to an oxidation reactor. Before feeding it to the reactor, the mixed stream isheated to 300C and compressed to 2.57 atm. Pure propylene is fed to the reactor throughanother stream. The preheated gases react exothermically in a jacketed reactor that usescooling water as a cooling medium to maintain the reaction temperature at 300C. Propyleneis the limiting reactant, and oxygen is fed in excess of 20% into the oxidation reactor.A hot gaseous mixture is produced from the reactor contain acrylic acid as the major product.Acetic acid, carbon dioxide, and water are the side products with unreacted oxygen. The hotgaseous mixture is cooled down in a condenser from 300 to 50C and fed to a flash column.The column separates the mixture and sends gaseous material such as carbon dioxide andunreacted oxygen through the top product stream to a gas separator. The bottom stream fromthe flash column contains acrylic acid, acetic acid, and water. The gas separator is used toseparate the carbon dioxide gas from the oxygen, and the oxygen is then recycled and mixedwith the oxygen feed stream. The efficiency of the gas separator is around 95% and the recyclestream have composition 99 mol% of Oxygen. Before it is recycled, the streams pressure isreduced to 1 atm through a valve to match the pressure of the oxygen feed stream.The pressure and temperature of the bottom stream for the flash column are increased to 3atm and 148C using a pump, and a heater, respectively. Then, it is fed to a distillation column(DC1) to purify the acrylic acid. The top outlet stream contains water, acetic acid and 5% ofthe total molar flow of acrylic acid fed to the DC1. The bottom consists of acetic acid andacrylic acid only, where the purity of the acrylic acid obtained is 99.0 mol%. The top outlet issent to the liquid-liquid extractor (LLE) to separate the water from the acetic acid. 31,680kmol/hr of ethylene glycol (EG) is used as a solvent to extract the water and flows out as thetop stream of the extractor column, leaving acetic acid, solvent, and a small amount of waterin the bottom stream. The extraction efficiency is 90% and 1% of solvent fed to the extractorloss to the top stream. The bottom stream will then undergo a distillation process (DC2) toseparate the solvent and the acetic acid. The distillate stream contains 95 mol% of acetic acidfed to the distillation column and water, while the bottom stream contains only a small amountof acetic acid and solvent.Draw Process Flow Diagram Only Write the chemical formulas for the following molecular compounds.1. sulfur hexafluoride2. iodine monochloride 3. tetraphosphorus hexasulfide 4. boron tribromide Compare pyrolysis and incineration in terms of experimentaldesign In a small business like a restaurant, a data analytics function needs to be implemented. To perform data analytics function, what type of network is best to recommend for a business like this. And what are the pros and cons of choosing that network for a company? [Please answer according to the provided context of restaurant] A 6.05-m radius air balloon loaded with passengers and ballast is floating at a fixed altitude. Determine how much weight (ballast) must be dropped overboard to make the balloon rise 116 m in 23.5 s. Assume a constant value of 1.2 kg/m3 for the density of air. Ballast is weight of negligible volume that can be dropped overboard to make the balloon rise. Show that(abc)(abc) ; but the converse is nottrue. Consider a disk with the following characteristics: block size B = 128 bytes; number of blocks per track = 40; number of tracks per surface = 800. A disk pack consists of 25 double-sided disks. (Assume 1 block = 2 sector) a. What is the total capacity of a track? b. How many cylinders are there? C. What are the total capacity of a cylinder? a d. What are the total capacity of the disk? e. Suppose that the disk drive rotates the disk pack at a speed of 4200 rpm (revolutions per minute); i. what are the transfer rate (tr) in bytes/msec? ii. What is the block transfer time (btt) in msec? iii. What is the average rotational delay (rd) in msec? f. Suppose that the average seek time is 15 msec. How much time does it take (on the average) in msec to locate and transfer a single block, given its block address? g. Calculate the average time it would take to transfer 25 random blocks, and compare this with the time it would take to transfer 25 consecutive blocks. Assume a seek time of 30 msec. 1)IMPORTANT: For this quiz, you will not explicitly specify any database names. All of your table names will start with your eid which is your linux login, so my "students" table would be named "bsay_students"2)The deliverable for this quiz is a single .sql file which contains all of the proper MySQL Statements to create the requested tables and run the requested queries in the order specified in the quiz.3)Create a table eid_studentsa)Each student has a name, up to 255 charactersb)Each student has an id, an integerc)Each student has a gpa, which is a double4)Run a SHOW CREATE TABLE eid_students query.5)Insert into the students table 26 studentsa)The student's id numbers are 800000001 through 800000026b)The students names are Aaa through Zzz (capitalized triplets of each letter of the alphabeti)These correspond to the id numbers in the same orderc)Each student's GPA is random number between 2.00 and 4.00 (inclusive, 2 decimal places)d)Run a SELECT query to show all of the student data, ordered by id6)Create a table eid_classesa)Table has these fields:i)Department Code (i.e. CT, CS, MATH, etc...). Use an appropriate data typeii)Course Number (i.e. 310, 312, 220, etc...). Use an appropriate data typeiii)Credits (Numeric, 1-4)b)Insert into this table the courses in CS and CT that you have taken, up to and including this semester.c)Print a SHOW CREAT TABLE for the table.d)Run a SELECT query to show all of the table's contents7)Change the entry for CT310 as follows:a)The department code is now CSb)The course numer is now 312c)Run a SELECT query to show the entire classes table contents8)Add a table called eid_enrollmentsa)It is a linking table to make a many-to-many relationship between students and courses.b)Use the appropriate columns to link these tables.c)Create an extra column called semesteri)It is an ENUM (FA17, SP18, SU18, FA18, SP19, SU19, FA19, SP20)d)Assign classes to students so that each student has exactly 4 different classes.i)Make sure CS312 has at least 5 students taking it. Have at least 2 classes that nobody is taking.e)Print out a count of the number of rows in this table9)Print out a list of students who are taking CS312 using a query.10)Print out a list of all classes that have at least one student taking thema)Only print out the Department Code, Course Number and Credits11)Print a full enrollment list that lists a row for each studenta)This row includes a column that is a comma separated list of course codes (i.e. "CS220, CS312, CS440")12)Run a query that only prints one row, one column that has the sum of the total number of enrolled credits.a)That is, for each student, add their enrolled credits (across all terms) and then sum that number for all students to get one numeric answer.13)10 points per top level bullet.14)All queries must be generic, that is they must not know anything about the specific data in the tables and should work even if the data in the tables is changed. FILL THE BLANK.Amy sometimes seems to ignore you, but only when you stand to her left. This is most likely a problem in the ______.A. right parietal lobeB. left occipital lobeC. medial prefrontal cortexD. left frontal lobe Q1. Consider an array having elements: 12 34 8 52 71 10 2 66 Sort the elements of the array in an ascending order using selection sort algorithm. Q2. Write an algorithm that defines a two-dimensional array. Q3. You are given an one dimensional array. Write an algorithm that finds the smallest element in the ar Ford Motor Company uses an undifferentiated (mass market) strategy to target customers with its offerings of trucks and cars to suit the many customer tates. True or False Three bodies of masses m 1=6 kg and m 2=m 3=12 kg are connected as shown in the figure and pulled toward right on a frictionless surface. If the magnitude of the tension T 3is 60 N, what is the magnitude of tension T 2( in N) ?