Eva's pillows are really old and very flat. She is very used to them, so she thinks that they are fine. What would be a healthier option?
А. Fuller pillows that keep her neck straight
B. Stacking pillows so that her head is elevated.
C. Eliminating pillows and just sleeping on the mattress.
D. Using the pillows to get her feet higher than her head.

Answers

Answer 1

Answer:

I think c

Explanation:

have a good day/night/ whatever

Answer 2

Fuller pillows that keep her neck straight. The correct option is A.

Thus, Broader pillows that properly support her neck and head would be a better choice. Better sleeping posture and a lower incidence of neck and back pain can both be encouraged by pillows that keep the neck and spine in their natural alignment.

Flat pillows could not offer enough support, which could result in poor alignment and long-term discomfort or suffering.

Stacking pillows in Option B may provide some elevation, but it might not necessarily provide the essential neck and spine support. Option C (without using pillows) can fail to give the head and neck the necessary support and cushioning.

Thus, Fuller pillows that keep her neck straight. The correct option is A.

Learn more about Pillow, refer to the link:

https://brainly.com/question/33757779

#SPJ3


Related Questions

A wooden block moves at a constant speed on a rough horizontal surface. Draw a free-body diagram
clearly showing all the forces applied to the block; compare their magnitudes and directions.

Answers

The weight of the block and normal reaction are equal in magnitude but opposite in direction. Also, the frictional force and applied force are equal in magnitude but opposite in direction.

The forces acting on the wooden block moving at a constant speed include the following;

weight of block acting downwards, Wnormal reaction on the block acting upwards, Napplied force on the block acting towards positive x-direction, Ffrictional force acting towards negative x-direction, [tex]F_f[/tex]

The free-body diagram is presented below;

                                         

                                              N

                                              ↑

                               [tex]F_f[/tex]      ←  ⊕  →   F

                                              ↓

                                              W

The block is moving at a constant speed, we will have the following;

[tex]W = N \\\\F = F_f[/tex]

Thus, we can conclude that the weight of the block and normal reaction are equal in magnitude but opposite in direction. Also, the frictional force and applied force are equal in magnitude but opposite in direction.

Learn more here:https://brainly.com/question/2421394

What is the only force that can overcome the repulsion between two positively charged nuclei to bind them into an atomic nucleus

Answers

Answer:

Nuclear Fusion

Explanation:

At large distances, two nuclei repel one another because of the repulsive electrostatic force between their positively charged protons. If two nuclei can be brought close enough together, however, the electrostatic repulsion can be overcome by the attractive nuclear force, which is stronger at close distances.

A car accelerates from 20m/s to 25m/s in 4s as it passes a truck. What is the distance travelled?​

Answers

Answer:

afcorse 1 miles

Explanation:

yep plz make me the brainliest

The distance travelled by car is displacement which is

What is displacement?

Displacement is defined to be the change in position of an object.

[tex]s=\frac{1}{2} (v+u)t[/tex]

[tex]s=\frac{1}{2} (25+20)4\\s= 90 m[/tex]

To learn more about Displacement here

https://brainly.com/question/11934397

#SPJ2

Consider the dot diagrams for Objects A, B, and C. The arrow-
represents the direction of motion. Match the motion of
Objects A, B, and C to one of the lines on the graph.
Numbers can be used only one time.
A
2
B
Pos'n
3
С
-t
Tap
A matches graph:
B matches graph:
C matches graph:
4
5
6
--
Pos'n
t

Answers

You throw a ball upward. (a) Draw a motion diagram and two force diagrams for the ball on its way up and another motion diagram and two force diagrams for the ball on its way down. (b) Represent the motion of the ball with a position-versus-time graph and velocity-versus-time graph.

A 45 kg object has a momentum of 255 kg m/s northward.What is the objects velocity​

Answers

Answer:

5.66 m/s

Explanation:

p=mv

255 = 45v

v = 255/45

v = 5.66 m/s

If you want to verify your answer, just insert your value to the equation.

A particle has 37.5 joules of kinetic energy and 12.5 joules of gravitational potential
energy at one point during its fall from a tree to the ground. An instant before striking
the ground, how much mechanical energy.

Answers

Hi there!

[tex]\large\boxed{ME = 50 J}}[/tex]

Mechanical Energy = Potential Energy + Kinetic Energy, or:

E = U + K

Plug in the given potential and kinetic energies:

E = 12.5 + 37.5 = 50 J

a tube of constant circular cross-section, sealed at on end, contains an ideal gas trapped by a cylinder of mercury of length 0.035m. The whole arrangement is in the Earth's atmosphere. The density of mercury is 1.36*10^4, more details provided in the images.

Answers

Answer:

P V = N R T      ideal gas equation

V = .19 * A      volume of enclosed gas

.19 P = N R T / A      using volume of enclosed gas

P = Po + Phg       pressure on gas = atmospheric (Po) + Phg pressure due to column of mercury

.19 (Po + Phg) = N R T / A which is what was asked

Note Phg = density of Hg * height of Hg * acceleration due to gravity

A tube of constant circular cross-section, sealed at on end, contains an ideal gas trapped by a cylinder of mercury of length 0.035m. There will atmospheric pressure and pressure due to mercury column on trapped gas column  having length 0.19m which is given by,

(p₀+pm)×0.190 = nRT÷A.

What is Pressure?

Pressure is defined as force per unit area. i.e. P = F/A it gives the force on unit area.  its SI unit is Pascal (Pa) which is equal to N/m².  is a scalar quantity. its dimensions are [M¹ L⁻¹ T⁻²].

Looking at the figure from top to bottom, we can see the top end of the tube is opened. There is 0.035m of mercury column below which we have a air 0.190m of gas column.

We can feel the physics behind this figure what is happening here, top of the tube is open so there is atmospheric pressure acting on the mercury column and mercury column is above the gas column, it means that both atmospheric pressure and mercury pressure will act on gas column.

i.e.  (p₀+pm) = pressure on the air column

this (p₀+pm) is downward pressures, hence gas inside the tube gets compressed due to this pressure because bottom end is closed. it means that back pressure will be created inside the gas in upward direction and both pressures becomes equal at equilibrium.

i.e. (p₀+pm) = back pressure inside the gas column......1)

according to ideal gas equation, PV=nRT

pressure inside the air column is P = nRT÷V

where V is volume of gas that is A×0.190.

P = nRT÷(A×0.190).....( back pressure inside the gas column).

equation 1 becomes

(p₀+pm) = nRT÷(A×0.190).

Hence we get

(p₀+pm) ×0.190= nRT÷(A).

Hence proved.

To know more about pressure, click :

https://brainly.com/question/28012687

#SPJ3

Science Questions :)

Answers

I’m pretty sure it’s diagonally down to the right? Just seems the most logical to me anyways.

Answer:

The box will move diagonally down to the right

A ball is thrown at an angle of 38 degrees to the horizontal. What happens to the magnitude of the ball's vertical acceleration during the total time interval that the ball is in the air

Answers

Answer:

I belive it is 38 degrees

Explanation:

The magnitude of the vertical acceleration of the ball during the total time interval that the ball is in the air, the acceleration remains the same.

What is projectile motion?

A projectile can be defined as an object that is in flight after being projected. The acceleration acting in the vertical direction which is because of gravity in a projectile motion. Therefore, we can apply the equations of motion separately on X-axis and Y-axis to find the parameters.

If any projectile is projected with the velocity 'v' and is making an angle θ from horizontal. The horizontal component of the initial velocity of the projectile will be equal to vcosθ.

The vertical component of the initial velocity of the projectile is v sinθ. The horizontal component remains the same as no acceleration is acting horizontally.

The ball will experience only one force which is gravity if there is no air resistance. The gravity remains constant if there is no initial speed of the ball. The acceleration of the ball will be in the downward direction and stays constant.

Learn more about projectile motion, here:

brainly.com/question/11049671

#SPJ6

PLEASE HELP! I NEED TO ANSWER THIS QUICKLY!
1. What are the uses of microwaves in society today? Give examples
2. What advantages and/or disadvantages have microwaves as a technology had for humans
a) health b) economy and c) human living conditions?

Answers

Answer:

I'm not a genius ok?

Explanation:

1. Radar communication, Analysis of the molecular and atomic structure, telephone communication

2. c

Thirty Joules of energy are transferred out of a system. The energy is lost through heat, mechanical, and electrical energy. If mechanical energy took up 10 J and electrical energy took up 5 J, how many Joules were lost through heat energy?

OPTIONS

5 J



15 J



30 J



45 J

Answers

Answer:

its 15 J i belive

Explanation:

A 0.60 kg mass is moving horizontally with a speed of 7.0 m/s when it strikes a vertical wall. The mass rebounds with a speed of 4.20 m/s. What is the magnitude of the change in linear momentum of the mass

Answers

Answer:  The magnitude of the ball's momentum change is  

      Δp=m∣ν  

i

−ν  

f

∣=(0.70kg)∣(5.0m/s)−(−2.0m/s)∣=4.9kg⋅m/s.

Explanation:

based on what you know about the location in relation to the sun why is this called the goldilock zone in other galaxies

Answers

Answer: It's an area that's an optimal distance from the sun for potentially supporting  life

How can you find the mass of an object that is broken into parts?

Find the weight of the parts, and then add those weights together.

Find the weight of the whole.

Find the mass of the whole.

Find the mass of the parts, and then add those masses together.

Answers

The mass of an object broken into parts can be determined by finding the mass of the parts, and then add those masses together.

To total mass of an object broken into parts can be determined by adding the mass of different parts together.

[tex]M_t = m_1 + m_2 +\ ---[/tex]

where;

[tex]M_t[/tex] is the total mass of the objects[tex]m_1 , \ m_2[/tex] masses of the broken parts

Thus, we can conclude that the mass of an object broken into parts can be determined by finding the mass of the parts, and then add those masses together.

Learn  more here:https://brainly.com/question/13668778

what are the three different ways to tell the difference between a solar and lunar eclipse?

Answers

Answer:

Solar eclipses occur when the Moon passes between Earth and the Sun, leaving a moving region of shadow on Earth's surface. Lunar eclipses occur when Earth passes between the Sun and the Moon, casting a shadow on the Moon. This is an annular eclipse.

(credits to "britannica")

Explanation:

a. A pure sample was analysed and was found to contain 6.25 g of lithium, 5.40 g of carbon, & 21.60
g of oxygen. Calculate the empirical formula. Show your work out. If you do not show any work out,
marks will not be given. [3]
b. The molar mass of the compound is 116 g/mol, what is its molecular formula?

PLS URGENTLY ANS

Answers

The empirical formula of the compound is Li₂CO₃

First, we will determine the respective number of moles of each element present in the compound by dividing by their atomic masses

Lithium                      Carbon                          Oxygen

6.25÷6.94                 5.40÷12.01                    21.60÷16.00

0.9006                      0.4496                          1.35

Now, divide through by the smallest number of moles, that is, 0.4496

Lithium                      Carbon                          Oxygen

0.9006÷0.4496        0.4496÷0.4496            1.35÷0.4496

2                                      1                                    3

Hence, the empirical formula of the compound is Li₂CO₃

Learn more here: https://brainly.com/question/25661375

a car traveled 5,300 km in 1 hour whats the average speed is​

Answers

Answer:

5300km/h

Explanation:

That's an easy question. You can solve it yourself.

The answer can be found by dividing the Distance traveled by the Time.

Now you can solve all the problem of this rule.

when calculating the binding energy, what is z multiplied by?

Answers

Z times the mass of a hydrogen atom.

When calculating the binding energy, z multiplied by the sum of mass of proton and mass of electron.

What is z in binding energy?

Z in binding energy calaculation is the number of protons in the nuclides.

Formula for binding energy

To calculate the binding energy we use the formula below;

E = Z (mp + me) + Nmn − mn

Where;

Z is the number of protons in the nuclides N is the number of neutronsmp is mass of protonme is mass of electron

Thus, when calculating the binding energy, z multiplied by the sum of mass of proton and mass of electron.

Learn more about binding energy here: https://brainly.com/question/16795451

help me solve please ​

Answers

Answer:

please check the image

Explanation:

I hope this image helps you please follow the steps. Thank you

Answer:

1kg/```````2

Explanation:

solution

NEED ANSWER ASAP!
Which statement about a converging lens is not correct?

A ray parallel to the principal axis of the lens is refracted through the principal focus.

B All rays of light refracted by the lens pass through the principal focus.

C The distance between the centre of the lens and the principal focus is the focal length

D The principal focus of the lens is a point on the principal axis.​

Answers

Geometric optics allows you to find which the correct answer about which false statement is:

  B)  All rays of light refracted by the lens pass through the principal focus.

Geometric optics studies the formation of images using the light geometric properties of optical systems, the main expression for this is:

      [tex]\frac{1}{f} = \frac{1}{p} + \frac{1}{q}[/tex]  

Where f is the focal length, p and q the distance to the object and the image respectively.

There are some points of special interest:

Object at infinity (p = ∞).  In this case of the expression we see that the image is at the focal length. Image at infinity (q = ∞). In this case the object is at the focal point.

Let's analyze the claims.

A) True. A parallel ray comes from infinity and the image is formed at the focal point.

B) False. The image point is given by the expression above and depends on the distance to the object.

C) True. This is the definition of focal length.

D) True. All distances are measured from the main axis.

In conclusion, using geometric optics we can find that the correct answer about which false statement  is:  

      B)  All rays of light refracted by the lens pass through the principal focus.

Learn more about geometric optics here: brainly.com/question/2548694

Which phrase is best described as the energy of motion?

Answers

Answer:

The energy of motion is known as kinetic energy.

Explanation:

which work is done by effort​

Answers

input

work is done by effort input.

hope it helps

[tex] \: [/tex]

how much does it cost to charge an electric car at a public charging station

Answers

Answer:

Rs 16.5 lakh is a charge of an electric car at a public charging station

A long-distance runner runs at a constant speed of 4.8 m/s. How long does it take them to run 1.5 km?

Answers

Convert km to meters:

1km = 1000 m

1.5 km x 1000 = 1500 m

1500m / 4.8 m/s = 312.5 seconds

312.5 seconds / 60 seconds per minute =5.2 minutes = 5 minutes 12.5 seconds

the electromagnetic waves with the highest frequencies are called

Answers

Gamma rays - the most penetrating and ionising

A train travelling along a straight track starts from rest at point A and accelerates uniformly to 10 m si in 20 s. It travels at this speed for 60 s, then slows down uniformly to rest in 40 sat point C. It stays at rest at C for 30 s, then reverses direction, accelerating uniformly to 5 ms. in 10 s. It travels at this speed for 30 s, then slows down uniformly to rest in 10 s when it reaches point B.
1. Plot a graph of the motion of the train.
II. Use your graph to calculate:
III. the train's displacement from point A when it reaches point C
IV. the train's displacement from point A when it reaches point 13
V. the train's acceleration each time its speed changes.​

Answers

Please find attached photographs for your answer.

Hope it helps.

Do comment if you have any query.

Elements in the periodic table are arranged in order of increasing...
A mass number
B.Number of protons
C. number of neutrons
D. number of nucleons​

Answers

Answer:

(B) The number of protons - only the number of protons in the nucleus determines the element - mass and neutrons can vary for the same element

If a statue is made out of wood, which of these words correctly describes the statue?
OA.
wooded
ОВ.
woody
OC.
non-wood
OD.
wooden

Answers

Answer:

Od- Wooden

Explanation:

It would not make sense if it was non-wood because that make it no a wood base product, OC is not right because its not a a plant that produces wood as its structural tissue and thus has a hard stem.   An OA justT o take or get a supply of wood. so its Od

SOMEONE PLEASE HELP ME IM GOING INSANE 4 Select the correct answer. A satellite completes one revolution of a planet in almost exactly one hour. At the end of one hour, the satellite has traveled 2.0 x 107 meters and is only 10 meters away from its starting point. What is the numerical value of the satellite's average velocity after that one hour? O A. -3.77 x 10-2 meters/second OB. -2.77 x 10-3 meters/second OC. -2.62 x 10-2 meters/second D. -5.55 x 103 meters/second​

Answers

Hi there!

Since we are dealing with such large distances, we can approximate.

Recall that the equation for speed is:

displacement / time = velocity

OR:

d/t = v

Begin by converting one hour to seconds:

1 hr  = 3600 sec

Now, we can solve for velocity:

(-2.0 × 10⁷) / 3600 = -5555.6 m/s ⇒ D: -5.55 × 10³ m/s

The temperature of a body is measured using the resistance of a wire. To calibrate the device the following measurements were taken (ohms is the unit of electrical resistance).


Resistance in melting ice 240 ohms.

Resistance in boiling water 250 ohms.

a. What is the change in resistance for a change in temperature of 1 Degree Celcius?

b. The wire is placed into some hot water and the resistance is mesured to be 246 ohms. What is the temperature of the water?

Answers

Answer:

A)250-240

=10+960

=970

Other Questions
What are the differences between Out government service and privatizing government service? what mountain did moses receive the 10 commandments On a coordinate plane,FGH is formed with the vertices at point F(0,2), point G(1,0) , and point H(2,3) . Which expression can be used to determine the perimeter, in units, ofFGH ?A (01)2+(20)2+(12)2+(0(3))2+(20)2+(3(2))2B (0(2))2+(10)2+(10)2+(2(3))2+(2(3))2+(0(2))2C (0+1)2(2+0)2(1+2)2(0+(3))2(2+0)2(3+(2))2D (0+(2))2(1+0)2+(1+0)2(2+(3))2+(2+(3))2(0+(2))2 How to do system of inequalities word problem Why were European monarchs concerned in 1792? the baltimore system classifies viruses based predominantly on Select all the correct answers.Which two ideas did the colonists adopt from Locke's Enlightenment text Two Treatises on Government?popular sovereigntyconstitutional monarchynatural rightslimited governmentschecks and balances PLEASE HELP ME IM TIMED! Study the cartoon of Uncle Sam standing on a world map. A political cartoon of Uncle Sam standing on a world map. Uncle Sam looks over the Western hemisphere while politicians from other countries look on in the Eastern hemisphere. A hat labeled American Doctrine sits on Latin America.What does this image portray about US attitudes toward the rest of the world?The US saw Europe as an area where new colonies could be taken.The US wanted European countries to give aid to Latin American countries.The US tried to invite European countries to get involved in Latin American affairs.The US planned to keep European countries from becoming involved in Latin America. 1. Who was Gangorram and were did he live? what is the reason for line 3?? kyle has two snakes fluffy is 2 meters long muffy is 900 millimeters long compare their lengths to fill in the blanks_____ is the longest snake._____ is ______millimeters longer than ____PLSS HELP!! A thesis statement can be made more specific by listing subtopics. These help give yourreader a clear idea of what will follow in your essay.Which of these makes the best thesis statement?1. The reasons why I came to the United States to study.2. The reasons why I came to the United States to study were to educate myself and thento return to Tunisia to apply my education.3. There were many reasons why I came to the United States to study. Role of Trade unions in industrial relations How did Alaska die in the story looking for Alaska a number divided by 5 increased by 4 Which European countries from 1815 to 1848 were filled with many national groups? Please 1. Two students are asked to find the angle measures of AEFG, given that the triangle is isosceles. AEFG has an exterior angle at which has a measure of 110%. Their work is shown below.Which answer is correct? Explain below.Serin's Answer: The measure of Angle G is 70 degrees. Since the base angles are congruent, the measure of Angel F is also 70degrees.This leaves 40 degrees for Angle E.Lam's Answer: The measure of angle G is 70degrees. Since an isosceles triangle has two congruent angles, the measure of Angle E and Angle F must be 55degreesO Both are correct.ONeither is correct. a box of 15 cookies cost 9 dollars, how much will one cookie cost? khan academy How many different pairs of 2-digit numbers multiply to give a 3-digit number with all digits the same? (A) 5 (B) 6 (C) 7 (D) 8 (E)S