Explain how chemical spills on a person are handled when they are spilled :
(a) over the body
(b) in the eyes

Explain How Chemical Spills On A Person Are Handled When They Are Spilled :(a) Over The Body(b) In The

Answers

Answer 1
A). Remove contaminated clothing, shoes, jewelry and your laboratory coat. Ask someone in the laboratory to assist you.
Immediately flush the area with copious amounts of water for at least 15 minutes. If your eyes do not require flushing, attempt to protect the eyes from cross contamination.
Seek medical attention after washing the affected area for 15 minutes and call 911 or go to the nearest emergency care facility.
B). Don't rub the eye — this may cause further damage.
Don't put anything except water or contact lens saline rinse in the eye. And don't use eyedrops unless emergency personnel tell you to do so. Flush your eye with water. Use clean, lukewarm tap water for at least 20 minutes.

Related Questions

name 2 elements that are liquid at room temperature and describe their colour​

Answers

Answer:

Bromine

Mercury

Bromine (symbol Br and atomic number 35) is a reddish-brown liquid, with a melting point of 265.9 K. Mercury (symbol Hg and atomic number 80) is a toxic shiny silvery metal, with a melting point of 234.32 K.

To what energy level do the electrons drop when visible light is produced?

Answers

Answer: The energy of the photon is the exact energy that is lost by the electron moving to its lower energy level. When the electron changes from n=3 or above to n=2, the photons emitted fall in the Visible Light region of the spectra

the role of haemoglobin in the transport of oxygen and carbon dioxide

Answers

Hemoglobin with bound carbon dioxide and hydrogen ions is carried in the blood back to the lungs, where it releases the hydrogen ions and carbon dioxide and rebinds oxygen. Thus, hemoglobin helps to transport hydrogen ions and carbon dioxide in addition to transporting oxygen.

Bio fuel is a mixture of petrol and 20%——————​

Answers

Answer:

methane and petrol okkkkkkkkkkkkkkkkkkk

Consider the unbalanced chemical equation:
H2SO4 (aq) + Fe(OH)3 (S) → Fe2(SO4)3 (S) + H2O (L)
A volume of 38.0 mL of aqueous H2SO4 solution was required to
react completely with 0.685 g Fe(OH)3 (molar mass = 106.8 g/mol)
to produce Fe2(SO4)3. Calculate the molar concentration of the
H2SO4 solution.
A) 0.253 M
B) 0.344 M
C) 0.214 M
D) 0.301 M
E) 0.175 M

Answers

The answer is A. The explanation is in the image.

On the top of the image where it just says equation:, that is part of the sentence "First we need to balance the equation:"

What is a peninsula?

Answers

Answer:

A peninsula ( Latin: paeninsula from paene "almost" and insula "island") is a landform surrounded by water on most of its border while being connected to a mainland from which it extends.

Explanation:

CAN I GET BRAINLIEST

Calculate the pH at the equivalence point for the following titration: 0.25 M HCOOH versus 0.25 M NaOH.

Answers

The pH at the equivalence point for the titration of 0.25 M HCOOH versus 0.25 M NaOH is 8.5.

Let's consider the following neutralization reaction.

HCOOH + NaOH ⇒ HCOONa + H₂O

At the equivalence point, 0.25 M HCOOH completely reacted with 0.25 M NaOH to form 0.25 M HCOONa.

HCOONa undergoes hydrolysis. The net ionic equation is:

HCOO⁻(aq) + H₂O(l) ⇄ HCOOH(aq) + OH⁻(aq)

Given the concentration of HCOO⁻ is 0.25 M (Cb) and the basic dissociation constant of HCOO⁻ is 4.8 × 10⁻¹¹ (Kb), we can calculate the concentration of OH⁻ using the following expression.

[tex][OH^{-} ] = \sqrt{Kb \times Cb } = \sqrt{(4.8 \times 10^{-11} ) \times 0.25 } = 3.5 \times 10^{-6} M[/tex]

The pOH of the solution is:

[tex]pOH = -log [OH^{-} ] = -log (3.5 \times 10^{-6} ) = 5.5[/tex]

The pH of the solution is:

[tex]pH = 14 -pOH = 14 -5.5 = 8.5[/tex]

The pH at the equivalence point for the titration of 0.25 M HCOOH versus 0.25 M NaOH is 8.5.

Learn more: https://brainly.com/question/2728613

How many atoms are in mercury phosphate

Answers

Answer:

There are 95 atoms in mercury phosphate

Explanation:

You just add the atomic number for both elements

identify each of the following changes of states as melting ,freezing,sublimation or deposition
a: ice sculpture start breaking down as temperature rise above 0 degree​

Answers

Answer:

Melting

Explanation:

Ice begins to melt at 0 degrees celsius

Melting is from solid to liquid

Freezing is from liquid to solid

Sublimation is from solid to gas

Deposition is from gas to solid

Pick the correct answer!
1. Why does the octet rule apply primarily to main-group elements, not to transition metals?
a. The octet rule states that main-group elements tend to react so that they attain a halogen electron configuration.
b. The octet rule states that transition metal-group elements tend to react so that they attain a noble gas electron configuration.
c. The octet rule states that main-group elements tend to react so that they attain a ionic electron configuration. d. The octet rule states that main-group elements tend to react so that they attain a noble gas electron configuration.​

Answers

Answer:

I think it would be b. The octet rule states that transition metal group elements tend to react so that they attain a noble gas electron configuration.

which one is not allotropes of carbon? ​

Answers

Answer:

B. Activated Carbon

Explanation:

Which of the following statements is true?
Select one:
a. All the answers are right
b. Aerobic and anaerobic bacteria don’t decompose organic matter
c. Aerobic bacteria produce bad smelling compounds
d. Anaerobic bacteria produce oxygen as one of their decomposition products
e. Anaerobic bacteria function in the absence of oxygen

Answers

I would say E is the correct answer because anaerobic bacteria function is the absence of oxygen. Anaerobic means “ without oxygen”

1 question hurry as fast as possible no link

Answers

Answer: ELEMENT

Explanation:

The answer is element

How many aluminum ions are present in 65.5 mL of 0.210 M All3solution?

Answers

Answer:

Aluminium ions present's in 65.5mL of 0.210

M All 3solution is Given below-:

Answer and Explanation: 1

The first step is to determine the moles of aluminum ions. This utilizes the volume, molar concentration, and subscripts from the chemical formula of aluminum (III) fluoride as shown.

65.5 mL×1 L1000 mL×0.210 mol AlF31 L×1 mol Al3+1 mol AlF3=0.013755 mol Al3+65.5 mL×1 L1000 mL×0.210 mol AlF31 L×1 mol Al3+1 mol AlF3=0.013755 mol Al3+

To calculate for the number of aluminum ions, we use Avogadro's number as shown.

0.013755 mol Al3+×6.022×1023 ions1 mol Al3+=8.28×1021 ions Al3+.

Itz the ans. of collage ok man.

Answer:

m0.013755

m

o

l

A

l

3

+

×

6.022

×

10

23

i

o

n

s

1

m

o

l

A

l

3

+

=

8.28

×

10

21

i

o

n

s

A

l

3

+

L

×

1

L

1000

m

L

×

0.210

m

o

l

A

l

F

3

1

L

×

1

m

o

l

A

l

3

+

1

Explanation:

The first step is to determine the moles of aluminum ions. This utilizes the volume, molar concentration, and subscripts from the chemical formula of aluminum (III) fluoride as shown.

65.5. To calculate for the number of aluminum ions, we use Avogadro's number as shown.

A bike with mass of 10 kg is moving with a speed of 5 m/s. What is the magnitude of its momentum?​

Answers

Answer:

The momentum is then (10 kg)(5 m/s)= 490.5 kg-m/s

Explanation:

Answer is A

explain why water wasn't used in crackers?​

Answers

So they won’t be soggy?

Which two metals shown won't make a solid when combined with anything? 2.2.2

Answers

Answer:

aluminum Zicam iron

Explanation:

Which metals dont react with anything?

Metals like aluminium, iron and zinc do not react either with cold or hot water. But they react with steam to form the metal oxide and

Wyndirbu lie the following best describes the role played by
hydraulic fluid a hydraulic machine?
А
A source of fuel
B
A medium for the transfer of force
С
A coolant
D
A cleaning agent


Help pls

Answers

The role played by hydraulic fluid in a hydraulic machine is as a medium for

the transfer of force.

Hydraulic fluid is used primarily in a hydraulic machine for the transfer of

force from one point to another. This makes the system able to perform the

required functions.

Hydraulic fluid also has other functions such as being a coolant and as a

cleaning agent(removal of contaminants) which aren't its major function.

Read more on https://brainly.com/question/25514384

why the back torn of camel is important?​

Answers

The back torn of Camel is important because it acts as a storage facility for

fats.

Camels are found in desert regions where there is scarcity of

Food  Water

This makes the food it eats to get stored at the back in the hump

region as fats so as to enable it survive long periods of unavailability of food.

The fats are gradually metabolized into nutrients which is used by the body

cells to ensure adequate energy availability and optimal survival.

Read more about Camels here https://brainly.com/question/24478294

How are metals, metalloids, nonmetals grouped

Answers

no I will not please put you because that's the god of the Bible

Metals are good conductors of heat and electricity, and are malleable (they can be hammered into sheets) and ductile (they can be drawn into wire).

Nonmetals are (usually) poor conductors of heat and electricity, and are not malleable or ductile; many of the elemental nonmetals are gases at room temperature, while others are liquids and others are solids. 

The metalloids are intermediate in their properties.  In their physical properties, they are more like the nonmetals, but under certain circumstances, several of them can be made to conduct electricity.

hope this answer helped u, if u can pls mark me as the brainliest. :)

Which of these is the condensed structural formula for an alkane with four carbon
atoms?
O CH3CH2CH2CH3
H
HLH
1C
H
C2
LH
I
C
HTH Н
H
0-I
I

H
OCH3CHCHCH3
OC-C-C-C

Answers

Answer:

First option

Explanation:

The option that says CH3CH2CH2CH3 is the correct option (I hope that I am right because the order of the answers is not very clear :/)

If an HPLC procedure is running at a pressure of 5.48×10^8 Pa what is it’s running pressure in torr

Answers

4.11x10^6 torr , 1 pa=0.0075 torr

An atom has the following electron configuration.
1s22s22p63s23p64s2
How many valence electrons does this atom have?

Answers

Answer:

2

Explanation:

4s2 has 2 valence electrons

Valence shell is the shell which is the outermost shell, that is filled in the last, before valence shell is penultimate shell. Therefore 2 valence electron are there in the valence shell.

What is element?

Element generally consist of atoms or we can say atoms combine to form element. Atoms of an element is always same, means all the properties of all atoms of one type of element is same.

From our question the electronic configuration of element is given as

1s²2s²2p⁶3s²3p⁶4s²

Valence electron is the one which is present in the outermost shell or orbit. So, form above electronic configuration we can say that 4 is the outermost shell and in this shell 2 electron is present. Therefore 2 electron are there in the valence shell as valence electron.

To know more about element, here:

https://brainly.com/question/8460633

#SPJ5

A containing vessel holds a gaseous mixture of nitrogen and butane. Thepressure in the vessel at 126.9 Cis 3.0 atm. At 0 C, the butane completelycondenses and the pressure drops to 1.0 atm. Calculate the mole fraction of nitrogenin the original gaseous mixture.

Answers

A vessel that contains a mixture of nitrogen and butane has a pressure of 3.0 atm at 126.9 °C and a pressure of 1.0 atm at 0 °C. The mole fraction of nitrogen in the mixture is 0.33.

A vessel contains a gaseous mixture of nitrogen and butane. At 126.9 °C (400.1 K) the pressure is due to the mixture is 3.0 atm.

We can calculate the total number of moles using the ideal gas equation.

[tex]P \times V = n \times R \times T\\\\n = \frac{P \times V}{R \times T} = \frac{3.0 atm \times V}{0.082 atm.L/mol.K \times 400.1 K} = 0.091 mol/L \times V[/tex]

At 0 °C (273.15 K), the pressure due to the gaseous nitrogen is 1.0 atm.

We can calculate the moles of nitrogen using the ideal gas equation.

[tex]P \times V = n \times R \times T\\\\n = \frac{P \times V}{R \times T} = \frac{1.0 atm \times V}{0.082 atm.L/mol.K \times 400.1 K} = 0.030 mol/L \times V[/tex]

The mole fraction of nitrogen in the mixture is:

[tex]X(N_2) = \frac{0.030 mol/L \times V}{0.091 mol/L \times V} = 0.33[/tex]

A vessel that contains a mixture of nitrogen and butane has a pressure of 3.0 atm at 126.9 °C and a pressure of 1.0 atm at 0 °C. The mole fraction of nitrogen in the mixture is 0.33.

Learn more: https://brainly.com/question/2060778

What is the limiting reactant from this equation

Answers

Answer:

A Option is the correct answer.

Explanation:

which has the shorter bond lengths in Alkane,alkene and alkynes​

Answers

Answer:

alkanes

Alkynes have the strongest bond. Followed by alkenes and then alkanes. This is because in alkynes there are 3 bonds between at least two carbons

When 0.717 g of sodium metal is added to an excess of hydrochloric acid, 7450 J of heat are produced. What is the enthalpy of the reaction as written?

2Na(s)+2HCl(aq)⟶2NaCl(aq)+H2(g)

Answers

Answer:

The enthalpy change of the reaction is 4.78 × 10⁴ J.

Explanation:

We are given that 0.717 g of sodium metal reacts with hydrochloric acid to produce 7450 J of heat.

Converting grams of sodium to moles:

[tex]\displaystyle 0.717 \text{ g Na} \cdot \frac{1 \text{ mol Na}}{22.99 \text{ g Na}} = 0.0312 \text{ mol Na}[/tex]

And dividing the amount of heat produced by the moles of sodium reacted yields:

[tex]\displaystyle \Delta H = \frac{7450 \text{ J}}{0.312 \text{ mol Na}} = 2.39 \times 10^4 \text{ J/mol Na}[/tex]

Because the given reaction has two moles of sodium metal, we can multiply the above value by two to acquire the enthalpy change of the given reaction:

[tex]\displaystyle \Delta H = 2\text{ mol Na}\left(2.39 \times 10^4 \text{ J/mol Na}}\right) = 4.78 \times 10^4 \text{ J}[/tex]

In conclusion, the enthalpy change of the reaction is 4.78 × 10⁴ J.

People use solution of Na3PO4 to clean walls before putting up wall paper. If the entration is 1.7% (m/v). What mass of Na3PO4 is needed to make 2L of solution? ​

Answers

Answer:

34 grams

Explanation:

Assuming m/v means mass of solute / volume of solvent, then set up the equation:

1.7/100=m/2000, by cross multiplication, m=34 grams


True or false? Suppose you have two identical birthday balloons, with one filled with the gas helium and the other blown up by you. Assuming they're both filled to the same amount, these balloons will have the same number of molecules.

Answers

Answer:

True!

Explanation:

Avogadro’s law means that if we compare the number of helium molecules and the number of air molecules needed to inflate the same balloon, we would find the numbers the same.

The balloon filled with helium air, and the one blown by oneself with the same amount of air have the equivalent number of molecules. Thus, the given statement is true.

What is the relation between moles and atoms?

The moles are given as the mass of the compound with respect to the molar mass. According to the Avogadro's law, the 1 mole of a substance has the presence of the atoms equivalent to the Avogadro number.

In the balloons filled with oneself and individual there is same amount of gas, thus have same moles and thereby the number of molecules will be same in both the balloons. Thus, the given statement is true.

Learn more about volume of gas, here:

https://brainly.com/question/12357202

#SPJ2

A solution is prepared by dissolving 15.0 g of pure HC2H3O2 and 25.0 g of NaC2H3O2 in 775 mL of solution (the final volume). Incorrect answer icon Incorrect. Did you use the correct form of the H-H equation

Answers

that made me have a seizure
Other Questions
What happens when you drop an egg on the ground from about 6 ft high? Andre ran a 100 meter race in 12 seconds. What was his average speed as he ran? A motorboat moves across a lake at a constant speed. When it begins, it is 55 km from the shore. After 12 minutes, it is 19 km from the shore. Which function describes the motorboat's distance from the shore? A. y = 12x + 19 B. y = 3x + 55 C. y = 3x + 55 D. y = 12x + 55 Hellppp meeeeeee PLEASEEEEE-&:&: A data dictionary is also known as ________. Group of answer choices a data warehouse clickstream data a data mart ubiquitous computing a metadata repository A certain star has a luminosity that is 5.9 times greater than that of our sun and a radius that is 2.8 times greater than the sun. What is the temperature of this star relative to the sun? solve 3/4x-5=xGive your answer correct to 2 decimal places Write the equation of the line in point-slope form that has slope 3 and passes through (2, -5). In the fairy tale, "The Mouse, the Bird, and the Sausage," which character does the cooking? Use the information given to enter an equation in standard form. (6, 10) and (5, 7) are on the line. Pls provide an explanation if possible What belief does Cugoano explicitly state in thispassage? People who enslave others are immoral. Education will turn people against slavery. Slavery should be abolished. It can be difficult to do one's duty. solve the proportion (someone pls help) Gregor Mendels research formed the basis of the field ofgenetics.dominance.recessiveness.selective breeding. Determine the number of solutions you will have for the system: 1/3x+y=2 and 3y=6-xOne solution. No solutions. Infinite solutions. Impossible to determine. Represent the following on a line graphTime Temperature o F5: 00 AM - 408:00 AM - 5011: 00 AM - 602: 00 PM- 605: 00 PM- 308:00 PM- 20If you could like draw one and attach it or a online version that would be great just need it represent. Question 11 options:The area of a rectangle is 80 cm2.The length is x 8, and the width is x + 8.Find the value of x, and the dimensions of the rectangle.A = lw Mariana Beach in Chennai is not the longest beach in India. True or False? VERY URGENT PLEASE HELPPPPPP What is the main reason there needs to be a significant distance between the reader's and the story's history? (4x+2)(x-3)Expand and simplify