Federico enjoys catching pokemons in university campus. One day, while trying to catch charmander, he found the best spot next to a


perfectly circular pond. He was 43 feet from the bank and 75 feet from the point of tangency. Determine the radius of the pond using the


given information. Round to the nearest integer,

Answer:

Its B because you find the number in the middle, if theres two numbers in the middle, you add them up and divide by 2

the answer is B

the answer is B because 21 and 23 both seem to be in the middle. when two numbers are in the middle, you add them, then divide by two as a result, you would get 22.

The slope of the secant line connecting two points on a curve can be calculated using the formula: slope of secant line = (change in y) / (change in x).

For this problem, the two points are (-1, f(-1)) and (2, f(2)), and we need to find the slope of the secant line connecting them. To do this, we first need to find the y-coordinates of these points by plugging the given x-values into the function f(x) = 3x^2 + 4x - 5. Then we can use the formula for the slope of a secant line to find the slope of the line connecting these two points. The slope of the secant line is an important concept in calculus and is used to approximate the instantaneous rate of change of a function at a particular point.

For more similar questions on topic Secant slope.

https://brainly.com/question/14438198

#SPJ11

The value of Emma's deposit after 3 years, including simple interest, is $90 + $10.80 = $100.80.

Simple Interest = Principal x Rate x Time

In this case, the Principal is $90 (the initial deposit), the Rate is 4% (0.04 as a decimal), and the Time is 3 years.

Step 1: Calculate the simple interest.
Simple Interest = $90 x 0.04 x 3
Simple Interest = $10.80

Step 2: Add the simple interest to the initial deposit.
Total Value = Principal + Simple Interest
Total Value = $90 + $10.80
Total Value = $100.80

So, the value of Emma's deposit after 3 years is $100.80.

learn more about "simple interest":- https://brainly.com/question/20690803

#SPJ11

Answer:

6

Step-by-step explanation:

A=hbb/2=4·3/2=6

To find a triangle's area, use the formula area = 1/2 * base * height. Choose a side to use for the base, and find the height of the triangle from that base. Then, plug in the measurements you have for the base and height into the formula

or

The area of a triangle is the space enclosed within the three sides of a triangle. It is calculated with the help of various formulas depending on the type of triangle and is expressed in square units like, cm2, inches2, and so on.

$148.39 much money will he have to spend for his skateboard.

Levi will have to spend approximately $148.39 for his skateboard.

The original price can be defined as the cost price of an item or a service. The decrease in the original price of a product or service is called the discount offered to the buyer. Generally, this discount is expressed as a percentage.

Original Sale Price means the price at which the current Owner purchased the Property (not including commissions, loan origination fees, appraisals fees, title insurance premiums and other similar transaction costs).

To calculate this, we need to find 6% of the original price and add it to the original price:

6% of 139.99 = 0.06 x 139.99 = 8.3994

Adding this to the original price gives:

139.99 + 8.3994 = 148.3894

Rounding to the nearest cent gives $148.39.

To learn more about original price visit: https://brainly.com/question/731526

#SPJ11

The function can be expressed in terms of natural logarithms as f(x) = (1/2) ln (4x+5) - (1/2) ln (7x-4).

The function is, f(x) = ln √(4x+5)/√(7x-4)

First, note that we can simplify the expression inside the natural logarithm by applying the rules of radicals:

√(4x+5)/√(7x-4) = (4x+5)^(1/2) / (7x-4)^(1/2)

Now, we can apply the rule for the logarithm of a quotient, which states that:

ln (a/b) = ln a - ln b

Using this rule, we can rewrite the given function as:

f(x) = ln [(4x+5)^(1/2) / (7x-4)^(1/2)]

= ln (4x+5)^(1/2) - ln (7x-4)^(1/2)

Next, we can apply the rule for the logarithm of a power, which states that:

ln a^n = n ln a

Using this rule, we can simplify the logarithms in the expression above:

f(x) = (1/2) ln (4x+5) - (1/2) ln (7x-4).

To know more about logarithms, here

brainly.com/question/30085872

#SPJ4

Grass Seed Area = L - 20 1/8

To help Warren determine the area of his lawn where grass seed is needed, we first need to know the total area of his lawn.

Unfortunately, you have not provided the dimensions of the entire lawn. However, I can guide you through the process using the information given about the pool.

First, let's find the area of the pool. The dimensions are 5 3/4m by 3 1/2m. To find the area, multiply the length by the width:
Area = (5 3/4) * (3 1/2)
Convert the mixed numbers to improper fractions:
Area = (23/4) * (7/2)
Multiply the fractions:
Area = (23*7) / (4*2) = 161/8

Now convert the improper fraction back to a mixed number:
Area = 20 1/8 square meters
This is the area of the pool. To find the area where grass seed is needed, subtract the pool's area from the total area of the lawn. Assuming the total area of the lawn is "L" square meters, the area to be covered with grass seed would be:
Grass Seed Area = L - 20 1/8

Once you provide the dimensions of the entire lawn, you can follow these steps to find the area where grass seed is needed.

You can read more about fraction at https://brainly.com/question/78672

#SPJ11

Joey forgot to record approximately 9,412 views after the second month.

Using a regression calculator, we find that the equation that best models the data is:

y = 4298.76x + 809.72

The coefficient of determination (R-squared value) for this regression is 0.994, indicating a strong linear relationship between the number of months and the total number of views.

We need to find the value of y for x = 2, using the regression equation we found in part a:

y = 4298.76(2) + 809.72

y ≈ 9412.24

Learn more about regression on

https://brainly.com/question/25987747

#SPJ1

The distance between the points (1, 1) and (1, -4) is 5 units and the reflection of the coordinate points is (-4, 6.2).

(a) We need to find the length between the pair of points which are (1, 1) and (1, −4). It can be determined by using the distance formula. The formula to find the distance between two points (x1, y1) and (x2, y2) is given as,

[tex]d = √(x2−x1)²+(y2−y1)²[/tex]

Given data:

The first points are = (1, 1)

second points are =(1, −4)

Substituting the first and second values into the distance formula, we get:

= √(1−1)²+(−4−1)²

= √0+(−5)²

= √25​

= 5

Therefore, The distance between the points (1, 1) and (1, -4) is 5 units.

(b )We need to find the reflection of the coordinate point. According to the reflection rule when a point is reflected across the y-axis, the x-coordinate changes sign while the y-coordinate remains the same. The reflected point will be,

= (x, y) = (-x, y).

Given Data:

Coordinate points = (4, 6.2)

According to the rule, it is given as:

= (4, 6.2)

= (-4, 6.2)

Therefore, the reflection of the coordinate points is (-4, 6.2)

To learn more about the distance formula.

https://brainly.com/question/30395212

#SPJ4

The number of yellow marbles Stefan received is 4.

To find out how many yellow marbles Stefan received, we need to calculate 10% of the total number of marbles, which is 40.

Percentage calculations involve finding a part of a whole, and in this case, we are looking for the part that represents the yellow marbles. To find 10% of 40 marbles, you simply multiply the total number of marbles (40) by the percentage value (10%) as a decimal. To convert 10% to a decimal, you divide by 100, giving you 0.1.

Now, multiply the total marbles by the decimal value:

40 marbles * 0.1 = 4 marbles

So, Stefan received 4 yellow marbles in the bag he bought from the craft store.

Learn more about Percentage here: https://brainly.com/question/24877689

#SPJ11

The fraction is 1/6. Option D

First, we need to know the conversion factor the parameters.

Then, we have that';

1 liter = 1000 milliliter

10 milliliters (ml) = 1 centiliter (cl)

10 centiliters =  1 deciliter (dl) = 100 milliliters

1 liter =  1000 milliliters

1 milliliter =  1 cubic centimeter

1 liter =  1000 cubic centimeters

Then, we can say that;

If 1 liter = 1000ml

Then 2 4/8 = 400ml

2.4 liters is equal to 2.4 x 1000= 2400 milliliters.

400/2400

Simplify the fraction;

4/24

Divide the values, we get;

1/6

Learn about conversion factor at: https://brainly.com/question/97386

#SPJ2

(a) A vector v parallel to the line of intersection L is v = <1, 1, -2>. (b) The cartesian equation of the plane is -7x + 10y - 3z = -1

(a) To find a vector v parallel to the line of intersection L, we need to take the cross product of the normal vectors to the two given planes. The normal vectors are the coefficients of x, y, and z in the equations of the planes.

In this case, the equations of the planes are:

x + y - 2z = 1

4x + y + 3z = 4

The normal vectors to these planes are <1, 1, -2> and <4, 1, 3>, respectively. Since the line of intersection is parallel to both planes, a vector parallel to the line must be perpendicular to both normal vectors.

We can find such a vector by taking the cross product of the two normal vectors, which gives us: <1, 1, -2> × <4, 1, 3> = <-7, 10, -3>

Therefore, a vector v = <1, 1, -2>.

(b) To find the equation of the plane through the point (2, -1, 3) and perpendicular to L, we need to find a normal vector to the plane that is also parallel to L.

We can find such a vector by taking the cross product of the normal vectors to the two given planes. The normal vectors are <1, 1, -2> and <4, 1, 3>, so the cross product is: <1, 1, -2> × <4, 1, 3> = <-7, 10, -3>

This vector is parallel to L, so it can serve as the normal vector to the desired plane. The equation of the plane can be written in point-normal form as: -7(x - 2) + 10(y + 1) - 3(z - 3) = 0

Simplifying, we get:

-7x + 10y - 3z = -1

Therefore, the cartesian equation of the plane is -7x + 10y - 3z = -1, and it passes through the point (2, -1, 3) and is perpendicular to the line of intersection between the given planes.

To know more about cartesian equation, refer here:
https://brainly.com/question/11676110#
#SPJ11

The translation used is of 4 units to the right and 4 units upwards.

To find it, we just need to look at one of the vertices of the figures.

We can see that the vertex U starts at:

U = (0, -1)

And the second vertex U' is at (4, 3)

Taking the difference we will get:

(4, 3) - (0, -1) = (4, 4)

So we have a translation of 4 units to the right and 4 units upwards.

Learn more about translations at:

https://brainly.com/question/24850937

#SPJ1

The correct answer is F.

To apply the Ratio Test, we need to compute:

L = lim(n → ∞) |a(n+1)/a(n)| = lim(n → ∞) |(8(2n+3) + 4)/(8(2n+1) + 4)|

Dividing numerator and denominator by 8(2n+3), we get:

L = lim(n → ∞) |(1 + 1/(2n+3))/(1 + 1/(2n+1))|

As n → ∞, both fractions approach 1, so the limit simplifies to:

L = lim(n → ∞) 1 = 1

Since L = 1, the Ratio Test is inconclusive. We cannot say anything about the convergence or divergence of the series from this test alone.

Therefore, the correct answer is F. The Ratio Test is inconclusive, but the series may converge conditionally by another test or tests.

Learn more about the convergence or divergence of a series.

brainly.com/question/31401009

#SPJ11

Alleen's mom is not correct because if her friend reads 20 pages, she can read 30 pages in the same time period.

To answer this question, we need to use the terms "ratio" and "proportion". The given ratio of Alleen's reading speed to her friend's speed is 1.5:1. If Alleen's friend reads 20 pages, we can use proportion to find how many pages Alleen can read:

1.5 / 1 = x / 20

To solve for x (the number of pages Alleen reads), we can cross-multiply:

1.5 * 20 = 1 * x
30 = x

So, if Alleen's friend reads 20 pages, Alleen can read 30 pages in the same time period.

Learn more about proportion here: https://brainly.com/question/12835281

#SPJ11

The data sets represent the answers of twenty students in Class A and twenty students in Class B regarding the number of hours they took to prepare for an exam. These data sets are important because they help us understand the study habits and time allocation of the students in each class.

To analyze the data sets, first, collect the data from each student in both classes. Record the number of hours they took to prepare for the exam, ensuring you have 20 responses from Class A and 20 from Class B. Then, you can compute the average, or mean, time spent for each class by summing up the hours reported by all students in each class and dividing by 20.

Next, compare the averages for Class A and Class B to determine if there is a significant difference in the time spent preparing for the exam. Additionally, you can calculate other statistical measures such as median and mode to gain further insight into the data sets.

Furthermore, analyzing the distribution of the data, such as the range, will provide information on the variability of the time spent studying in each class. This can help identify any trends or patterns in the students' preparation time.

In conclusion, the data sets representing the number of hours spent by students in Class A and Class B to prepare for an exam can provide valuable insights into their study habits, the effectiveness of their preparation, and any possible correlations between time spent studying and exam performance.

To know more about data sets refer here:

https://brainly.com/question/22210584#

#SPJ11

Check the picture below.

[tex](x)(18)=(x+1)(16)\implies 18x=16x+16\implies 2x=16 \\\\\\ x=\cfrac{16}{2}\implies x=8=RW[/tex]

The probability to select a male or someone in their 40's for a ceo position is company is equals to the 1/18. So, the option(c) is right answer for the problem.

We have a data of employees' information. It contains gender and age of employees in acme painting company. Randomly one employee is selected. We have to determine chance or probability that a ceo select a male or someone in their 40's. Sample size, n= 18

Probability is defined as chances of occurrence of an event. It is calculated by dividing the favourable response to the possible total outcomes.

Total possible outcomes= 18

number of male in her 40's age = 1

So, probability that select a male or someone in their 40's = 1/18

Hence, required probability is 1/18.

For more information about probability, visit:

https://brainly.com/question/25870256

#SPJ4

Complete question:

the above figure completes the question.

the gender and age of acme painting company's employees are shown below. age gender 23 female 23 male 24 female 26 female 27 male 28 male 30 male 31 female 33 male 33 female 33 female 34 male 36 male 37 male 38 female 40 female 42 male 44 female if the ceo is selecting one employee at random, what is the chance he will select a male or someone in their 40s?

a)1/3

b)1/2

c) 1/18

d) 11/18

The mass of the lamina that occupies the region D is 31/2 units and the center of mass is located at (1/2, 2/e).

We can find the mass of the lamina by integrating the density function over the region D:

m = ∫∫D p(x,y) dA

where dA is the area element in polar coordinates, which is equal to r dr dθ. The region D can be described as 0 ≤ x ≤ 1 and 0 ≤ y ≤ e, so the integral becomes:

m = ∫0^1 ∫0^e 31y dy dx

Solving the integral, we get:

m = 31/2

To find the center of mass, we need to find the x-coordinate and y-coordinate separately:

x = (1/m) ∫∫D x p(x,y) dA

y = (1/m) ∫∫D y p(x,y) dA

For the x-coordinate, we have:

x = (1/m) ∫0^1 ∫0^e x(31y) dy dx

Simplifying, we get:

x = (1/m) ∫0^1 31/2 x dx

x = 1/2

For the y-coordinate, we have:

y = (1/m) ∫0^1 ∫0^e y(31y) dy dx

Simplifying, we get:

y = (1/m) ∫0^1 31/3 e^3 dx

y = (2/e)

Therefore, the center of mass is located at (1/2, 2/e).

For more questions like Function click the link below:

https://brainly.com/question/16008229

#SPJ11

Based on the information provided, the one that is the correct graph is "On a coordinate plane, 2 curves are shown. Both curves have an asymptote at x = 2..." (option 2).

The graph of y = StartFraction 1 Over x + 2 EndFraction + 1 is the second option described: On a coordinate plane, 2 curves are shown. Both curves have an asymptote at x = 2. One curve opens up and to the right in quadrants 1 and 4. It crosses the x-axis at (3, 0). The other curve opens down and to the left and it crosses the y-axis at (0, negative 1.5).

This graph has a vertical asymptote at x = 2 and a horizontal asymptote at y = 1. It is a hyperbola that opens up and to the right in quadrants 1 and 4. The curve crosses the x-axis at x = 3, which means that when y = 0, x = 3. The other curve opens down and to the left and it crosses the y-axis at y = -1.5, which means that when x = 0, y = -1.5.

Note: This question is incomplete; here is the complete question:

Which of the following is the graph of y = StartFraction 1 Over x + 2 EndFraction + 1?

On a coordinate plane, 2 curves are shown. Both curves have an asymptote at x = 2. One curve opens up and to the right in quadrant 1. The other curve opens down and to the left and it crosses the x-axis at (1, 0).

On a coordinate plane, 2 curves are shown. Both curves have an asymptote at x = 2. One curve opens up and to the right in quadrants 1 and 4. It crosses the x-axis at (3, 0). The other curve opens down and to the left and it crosses the y-axis at (0, negative 1.5).

On a coordinate plane, 2 curves are shown. Both curves have an asymptote at x = negative 2. One curve opens up and to the right in quadrants 1 and 2. It crosses the y-axis at (0, 1.5). The other curve opens down and to the left and it crosses the x-axis at (negative 3, 0).

On a coordinate plane, 2 curves are shown. Both curves have an asymptote at x = negative 2. One curve opens up and to the right in quadrants 1, 2, and 4. It crosses the x-axis at (negative 1, 0). The other curve opens down and to the left in quadrant 3.

Learn more about graphs in https://brainly.com/question/17267403

#SPJ1

Since f''(x) is always 0, f(x) is not concave upward on any interval.

On what interval is f concave upward?

The first derivative of f(x) is f'(x) = 6.
The second derivative of f(x) is f''(x) = 0.
The interval on which f(x) is increasing is when f'(x) > 0, which is when x is in the interval (-2,-5) U (1,60).
The interval on which f(x) is decreasing is when f'(x) < 0, which is when x is in the interval (-5,1).
The interval on which f(x) is concave downward is when f''(x) < 0, which is all values of x.
The interval on which f(x) is concave upward is when f''(x) > 0, which is no values of x.

To find the first derivative of f(x), we need to take the derivative of each term separately. The derivative of 3 is 0, the derivative of 6x is 6, and the derivative of -153 +3.2 is 0. Adding these up gives us f'(x) = 6.

To find the second derivative of f(x), we need to take the derivative of f'(x), which is a constant function. The derivative of a constant function is always 0, so f''(x) = 0.

To determine where f(x) is increasing, we need to find the values of x where f'(x) > 0. Since f'(x) is a constant function, it is always positive, so f(x) is increasing on the interval (-2,-5) U (1,60).

To determine where f(x) is decreasing, we need to find the values of x where f'(x) < 0. Since f'(x) is a constant function, it is always positive, so f(x) is decreasing on the interval (-5,1).

To determine where f(x) is concave downward, we need to find the values of x where f''(x) < 0. Since f''(x) is always 0, f(x) is concave downward on all values of x.

To determine where f(x) is concave upward, we need to find the values of x where f''(x) > 0. Since f''(x) is always 0, f(x) is not concave upward on any interval.

Learn more about concave downward.

brainly.com/question/29121586

#SPJ11

To find the cube of a semimajor axis length (A), we need to raise the value to the third power, which is simply multiplying it by itself three times. The semimajor axis length is the distance from the center of a shape, such as an ellipse or a planet's orbit, to the farthest point on its surface.

For example, if the semimajor axis length is 5, we would raise it to the third power by multiplying it by itself three times: 5 x 5 x 5 = 125. So the cube of a semimajor axis length of 5 is 125.

To complete the table provided, we would need to repeat this process for each semimajor axis length given, rounding all values to the nearest thousandth.

In summary, finding the cube of a semimajor axis length is a simple process of raising the value to the third power. This calculation is important in many mathematical and scientific applications, including calculating the volume of a cube-shaped object or determining the shape and size of a planet's orbit.

To know more about semimajor refer here

https://brainly.com/question/30627888#

#SPJ11

This is the correct answer. I hope this helps!

The density of the wooden cube is 0.638 g/cm³. The type of wood the cube is made of is ash.

The wooden cube has a edge length of 6 centimetres and a mass of 137.8 grams.

The density of the wood can be calculated as follows:

density = mass / volume

volume of the wood = l³

where

Therefore,

volume of the wood = 6³

volume of the wood = 216 cm³

density of the wood = 137.8 / 216

density of the wood = 0.63796296296

density of the wood = 0.638 g/cm³

Therefore, the cube wood is made of ash.

Learn more on density here: brainly.com/question/8827822

#SPJ1

Caroline bought approximately 3.70 pounds of chicken breast.

Let's use algebra to solve the problem:

Let x be the number of pounds of chicken breast Caroline bought.

We know that 2.5 pounds of chicken breast cost $23.50, so we can set up the following proportion:

2.5 / $23.50 = x / $34.78

To solve for x, we can cross-multiply and simplify:

2.5 * $34.78 = x * $23.50

$86.95 = $23.50x

x = $86.95 / $23.50

x ≈ 3.70 pounds

Therefore, Caroline bought approximately 3.70 pounds of chicken breast.

To know more about proportion refer here:

https://brainly.com/question/30657439

#SPJ11

The height of the cone is approximately 12.15 millimeters (rounded to the nearest hundredth).

To find the height of the cone, we need to use the formula for the volume of a cone:

V = (1/3)πr²h

where V is the volume, r is the radius, h is the height, and π is approximately equal to 3.14.

We are given the volume of the cone as 2,279.64 cubic millimeters. We can plug this value into the formula and solve for h:

2,279.64 = (1/3)πr²h

Multiplying both sides by 3 and dividing by πr², we get:

h = (3 × 2,279.64) / (π × r²)

Now, we need to find the radius of the cone. Unfortunately, we are not given this information directly. However, we can use the fact that the volume of a cone is also given by:

V = (1/3)πr²h

If we rearrange this formula to solve for r², we get:

r² = 3V / (πh)

Now, we can substitute the given values for V and h and simplify:

r² = 3(2,279.64) / (π × h) ≈ 2,304.32 / h

Taking the square root of both sides, we get:

r ≈ √(2,304.32 / h)

Now, we can substitute this expression for r into our earlier formula for h:

h = (3 × 2,279.64) / (π × r²) ≈ (6,838.92 / π) / (2,304.32 / h)

Simplifying, we get:

h ≈ 2,279.64 × h / (2,304.32 / h)

h² ≈ 2,279.64 × h / (2,304.32 / h)

h³ ≈ 2,279.64

Taking the cube root of both sides, we get:

h ≈ 12.15

Know more about cone here:

https://brainly.com/question/16394302

#SPJ11

Distance time speed of different animals are:

Lion = 60 km/h  Sailfish = 130 km/h Peregrine Falcon  = 389 km/h Cheetah = 120 km/h  Springbok = 100 km/h Golden Eagle  = 320 km/h.

Here are the answers for each one:

1. Lion: The lion traveled a distance of 30 kilometers in a time of 30 minutes. To find the lion's speed, we can use the formula: speed = distance ÷ time. So, the lion's speed was 30 km ÷ 0.5 hours = 60 km/h.

2. Sailfish: The sailfish traveled a distance of 195 kilometers in a time of 1 hour and 30 minutes, which is the same as 1.5 hours. To find the sailfish's speed, we can again use the formula: speed = distance ÷ time. So, the sailfish's speed was 195 km ÷ 1.5 hours = 130 km/h.

3. Peregrine Falcon: The peregrine falcon traveled a distance of 778 kilometers in a time of 120 minutes, which is the same as 2 hours. To find the peregrine falcon's speed, we can once again use the formula: speed = distance ÷ time. So, the peregrine falcon's speed was 778 km ÷ 2 hours = 389 km/h.

4. Cheetah: The cheetah traveled a distance of 30 kilometers in a time of 15 minutes, which is the same as 0.25 hours. To find the cheetah's speed, we can use the formula: speed = distance ÷ time. So, the cheetah's speed was 30 km ÷ 0.25 hours = 120 km/h.

5. Springbok: The springbok traveled a distance of 10 kilometers in a time of 6 minutes, which is the same as 0.1 hours. To find the springbok's speed, we can use the formula: speed = distance ÷ time. So, the springbok's speed was 10 km ÷ 0.1 hours = 100 km/h.

6. Golden Eagle: The golden eagle traveled a distance of 240 kilometers in a time of 45 minutes, which is the same as 0.75 hours. To find the golden eagle's speed, we can use the formula: speed = distance ÷ time. So, the golden eagle's speed was 240 km ÷ 0.75 hours = 320 km/h.

To learn more about Distance

https://brainly.com/question/3153931

#SPJ11

Given AB and AC are lines that are tangent to the circle with the measure of angle BAC = 40°, ∠BDC is 140°.

A tangent to a circle is a line that intersects the circle at a single point. The point at which the tangent intersects the circle is known as the point of tangency. The tangent is perpendicular to the circle's radius, with which it meets.

You've been handed two tangent lines. You will also be handed a four-sided figure. All four-sided figures have 360 degrees of rotation. At 90 degrees, a radius meets a tangent.

∠BDA = 90°

∠DCA = 90°

∠BCA = 40°

All the angles in total make 360°, so:

∠BDA + ∠DCA + ∠BCA + ∠BDC = 360

90 + 90 + 40 + ∠BDC = 360

220 + ∠BDC = 360

∠BDC = 360 - 220

= 140°

To know more about tangent to circle:

https://brainly.com/question/15279341

#SPJ4

Correct question:

Given AB and AC are lines that are tangent to the circle with the measure of angle BAC = 40°, what is the measure of angle BDC? Image is attached below.

The rate of change for the water level between Weeks 2 and 3 is: D. 3 7/8.

In Mathematics and Geometry, the gradient, rate of change, or slope of any straight line can be determined by using the following mathematical equation;

Rate of change (slope) = (Change in y-axis, Δy)/(Change in x-axis, Δx)

Rate of change (slope) = rise/run

Rate of change (slope) = (y₂ - y₁)/(x₂ - x₁)

By substituting the given data points into the formula for the slope of a line, we have the following;

Rate of change (slope) = (y₂ - y₁)/(x₂ - x₁)

Rate of change (slope) = (1 5/8 + 2 1/4)/(3 - 2)

Rate of change (slope) = (13/8 + 9/4)/(1)

Rate of change (slope) = 3 7/8

Based on the table, the rate of change is the change in y-axis with respect to the x-axis and it is equal to 3 7/8.

Read more on slope here: brainly.com/question/3493733

#SPJ1

Using the composition of functions, if the two functions are inverses of each other, therefore, we cannot conclude if f(x) and g(x) are inverses of each other.

To check if the two functions f(x) and g(x) are inverses of each other, we need to verify if their composition f(g(x)) and g(f(x)) results in the identity function f(x) = x.

Let's first find the composition f(g(x)):

f(g(x)) = f(x^2 - 4)

= sqrt(x^2 - 4) + 4

Now, let's find the composition g(f(x)):

g(f(x)) = g(sqrt(x) + 4)

= (sqrt(x) + 4)^2 - 4

= x + 16 + 8sqrt(x)

To check if f(x) and g(x) are inverses of each other, we need to check if f(g(x)) = x and g(f(x)) = x for all x in the domain of the functions.

For f(g(x)):

f(g(x)) = sqrt(x^2 - 4) + 4

This function is only defined for x > 2, since the square root of a negative number is not real. Therefore, the domain of f(g(x)) is (2, infinity).

For g(f(x)):

g(f(x)) = x + 16 + 8sqrt(x)

This function is only defined for x >= 0, since the square root of a negative number is not real. Therefore, the domain of g(f(x)) is [0, infinity).

Since the domains of f(g(x)) and g(f(x)) do not overlap, we cannot check if they are inverses of each other. Therefore, we cannot conclude if f(x) and g(x) are inverses of each other.

To learn more about “function” refer to the https://brainly.com/question/11624077

#SPJ11

The total area on which the dart may land is 530.93 square units

The dart is a circle and hence the calculations will be accomplished using formula pertaining to a circle.

The circumference of a circle (dart) is given by the formula below

C = 2 * π * r

where

C is the circumference

π = pi is a constant term and

r is the radius.

26π = 2πr

Dividing both sides by 2π, we get:

r = 13

Area of the dart (circle)

A = πr²

A = π * (13)²

A = 169π (in terms of pi)

A = 530.93 square units (to 2 decimal place)

Therefore, the total area on which the dart may land is 169π square units.

Learn more about circumference at

https://brainly.com/question/20489969

#SPJ4