We can see that the absolute minimum occurs at (x, y) = (2, -48).
To find the relative and absolute extrema of the function g(x) = 3x³ - 36x on the domain [-4, 4], we first need to find the critical points. We do this by finding the first derivative, setting it to zero, and solving for x.
g'(x) = d(3x³ - 36x)/dx = 9x² - 36
Setting g'(x) to 0:
0 = 9x² - 36
x² = 4
x = ±2
These are our critical points. To determine if these are minima, maxima, or neither, we use the second derivative test.
g''(x) = d(9x² - 36)/dx = 18x
At x = -2:
g''(-2) = -36 < 0, so it's a relative maximum.
At x = 2:
g''(2) = 36 > 0, so it's a relative minimum.
Now, we need to compare the function values at the critical points and endpoints of the domain to determine the absolute extrema.
g(-4) = 3(-4)³ - 36(-4) = -192
g(-2) = 3(-2)³ - 36(-2) = 48 (relative maximum)
g(2) = 3(2)³ - 36(2) = -48 (relative minimum)
g(4) = 3(4)³ - 36(4) = 192
From the above values, we can see that the absolute minimum occurs at (x, y) = (2, -48).
To learn more about absolute minimum, refer below:
https://brainly.com/question/29030328
#SPJ11
Use linear approximation to approximate √125.04 as follows Let f(x) = ³√ x, and find the linearization of f(x) at x = 125 in the form y = mx+ b Note: The values of m and bare rational numbers which can be computed by hand. You need to enter expressions which give m and b exactly You should not have a decimal point in the answers to either of these parts m= b = Using these values, find the approximation Also, for this part you should be entering a rational number, not a decimal approximation ²√ 125.04≈
To approximate √125.04 using linear approximation, first find the linearization of f(x) = ³√x at x = 125. Then use the point-slope form of the equation to find the equation of the tangent line and plug in x = 125.04 to get the approximation.
To approximate √125.04 using linear approximation and the function f(x) = ³√x, first find the linearization of f(x) at x = 125 in the form y = mx + b. Calculate f(125) and f'(x).Calculate f'(125): Use the point-slope form of the equation
1: Calculate f(125) and f'(x).
f(125) = ³√125 = 5
f'(x) = (1/3)x^(-2/3)
2: Calculate f'(125).
f'(125) = (1/3)(125)^(-2/3) = 1/15
3: Use the point-slope form of the equation y - y1 = m(x - x1) to find the equation of the tangent line.
y - 5 = (1/15)(x - 125)
4: Rearrange to find y in terms of x.
y = (1/15)(x - 125) + 5
5: Determine the values of m and b.
m = 1/15
b = (1/15)(-125) + 5
6: Plug in x = 125.04 to approximate √125.04.
²√125.04 ≈ (1/15)(125.04 - 125) + 5
The linearization of f(x) at x = 125 is y = (1/15)x + b, with m = 1/15 and b = (1/15)(-125) + 5. Using these values, the approximation of √125.04 is (1/15)(125.04 - 125) + 5.
Learn More About Linearization: https://brainly.com/question/8894879
#SPJ11
pleaseeeeee help asapppp
The rate of change dP/dt of the number of students who heard a rumor is modeled by a logistic differential equation. The maximum capacity of the school is 732 students. At 12 PM, the number of students who heard the rumor is 227 and is increasing at a rate of 24 students per hour. Write a differential equation to describe the situation. dP/dt =?
The differential equation to describe the situation is:
dP/dt = 0.000508 * P * (1 - P/732)
We can write a logistic differential equation to describe the rate of change of students who heard the rumor. The equation is:
dP/dt = k * P * (1 - P/M)
where dP/dt is the rate of change in the number of students who heard the rumor, k is a constant, P is the number of students who have heard the rumor at a given time, and M is the maximum capacity of the school (732 students).
At 12 PM, P = 227 and dP/dt = 24 students per hour. We can plug these values into the equation:
24 = k * 227 * (1 - 227/732)
Now, solve for k:
k ≈ 0.000508
So, the differential equation to describe the situation is:
dP/dt = 0.000508 * P * (1 - P/732)
To learn more about differential equations, refer below:
https://brainly.com/question/30257736
#SPJ11
a norman window is a window with a semicircle on top of a regular rectangular window as shown in the diagram.what should the dimensions of the rectangular part of the norman window be to allow in as much light as possible if there is only 12 ft of framing material available
The width should be 12 feet and the height should be 6 feet.
Let's assume that the rectangular part of the window has a width of x feet. Since the semi-circle at the top is half the width of the rectangle, its radius will also be x/2 feet. Therefore, the height of the rectangle can be expressed as 12 - x/2, since we have a total of 12 feet of frame material available.
To find the area of the rectangle, we can multiply its length and width together: A = x(12 - x/2) = 12x - x²/2. To maximize this area, we can take its derivative with respect to x and set it equal to 0:
dA/dx = 12 - x = 0
x = 12
So the width of the rectangle should be 12 feet, and its height would be 12 - (12/2) = 6 feet. This would maximize the amount of light entering the rectangular part of the window, given the 12 feet of frame material available.
To know more about rectangle here
https://brainly.com/question/8663941
#SPJ1
what is the answer to 8 units away from zero.
Answer:
Step-by-step explanation:
Let R be the region in the first quadrant bounded by the graph of y=x3 the line x=2 and the x-axis. R is the base of a solid whose cross sections perpendicular to the x-axis are equilateral triangles. What is the volume of the solid?
The volume of the solid will be 32/7 √3.
How to calculate the volumeSince base of a solid whose cross-sections is perpendicular to the w-axis are equilateral triangles
Now base of triangle. is f(x) = x³ and the Area of Equilateral Triangle is ✓3/4 base²
The volume of the solid will be:
= ✓3/4 (x^7/7)²
= ✓3/4 (128/7)
= 32/7 √3
Therefore, the volume of the solid will be 32/7 √3.
Learn more about volume on
https://brainly.com/question/27710307
#SPJ1
The table shows the purchases made by two customers at a meat counter. you want to buy 2 pounds of sliced ham and 3 pounds of sliced turkey. can you determine how much you will pay? explain.
The cost of purchasing 2 pounds of sliced ham and 3 pounds of sliced turkey from the meat counter is $30.95.
The table provided shows the purchases made by two customers at a meat counter. To determine how much you will pay for 2 pounds of sliced ham and 3 pounds of sliced turkey, you need to first look at the prices listed in the table. For sliced ham, the price per pound is $4.99, and for sliced turkey, the price per pound is $6.99.
To calculate the cost of 2 pounds of sliced ham, you can multiply the price per pound ($4.99) by the number of pounds (2), which gives you a total cost of $9.98. Similarly, to calculate the cost of 3 pounds of sliced turkey, you can multiply the price per pound ($6.99) by the number of pounds (3), which gives you a total cost of $20.97.
Therefore, the total cost for 2 pounds of sliced ham and 3 pounds of sliced turkey would be $9.98 + $20.97 = $30.95.
In conclusion, by using the prices listed in the table, it is possible to determine the cost of purchasing 2 pounds of sliced ham and 3 pounds of sliced turkey from the meat counter. It is important to remember to multiply the price per pound by the number of pounds needed for each item, and then add the costs together to get the total price.
Know more about cost here:
https://brainly.com/question/15135554
#SPJ11
what principal will earn $67.14 interest at 6.25% for 82 days?
Answer: attach an image
Step-by-step explanation:
To find the principal, we can use the formula for simple interest:
I = P*r*t
where I is the interest, P is the principal, r is the interest rate, and t is the time in years.
We need to convert 82 days to years by dividing it by 365 (the number of days in a year):
t = 82/365
t = 0.2247
Now we can plug in the values we know and solve for P:
67.14 = P*0.0625*0.2247
P = 67.14/(0.0625*0.2247)
P = 1900
Therefore, the principal is $1900.
Construct a square, and a regular Pentagon with equal side equal to 0. 5 inch.
To construct a square and a regular pentagon with equal side lengths of 0.5 inch, we need to use basic geometric constructions.
How can I create a square and a regular pentagon with equal side lengths of 0.5 inch?To construct a square and a regular pentagon with equal side length of 0.5 inch, follow these steps:
(a) Construct a Square:
Draw a horizontal line segment of length 0.5 inch.From the endpoints of the line segment, draw two perpendicular lines of length 0.5 inch each, meeting at the endpoints of the original line segment.From the endpoints of these new line segments, draw two more perpendicular lines of length 0.5 inch each, meeting at the endpoints of the second line segment.Connect the endpoints of the four line segments to form a square.
(b) Construct a Regular Pentagon:
Draw a circle with a radius of 0.5 inch. This will be the circumcircle of the pentagon.Draw a horizontal line through the center of the circle.Mark the points where the line intersects the circle. These will be the vertices of the pentagon.Draw a line segment connecting two adjacent vertices of the circle.Using a compass, copy the length of this line segment to the next vertex, and connect the two vertices to form a line segment of the pentagon.Repeat this process for all five vertices of the circle to form the regular pentagon.
A geometric construction is a method of drawing a figure using only a straightedge (an unmarked ruler) and a compass.
For the square, we start by drawing a horizontal line segment of length 0.5 inch. We then draw two perpendicular lines of length 0.5 inch each, meeting at the endpoints of the original line segment.
These two new line segments represent the adjacent sides of the square. We then repeat this process to create the remaining two sides of the square, and connect all four endpoints to form the complete square.
For the regular pentagon, we need to construct a circle with a radius of 0.5 inch. This will be the circumcircle of the pentagon, meaning that all five vertices of the pentagon will lie on the circle.
We draw a horizontal line through the center of the circle, and mark the points where the line intersects the circle. These five points will be the vertices of the pentagon.
We then draw line segments connecting adjacent vertices, using a compass to copy the length of each line segment from the previous one.
This process will create all five sides of the pentagon, and the figure will be a regular pentagon with equal side lengths of 0.5 inch.
Learn more about regular Pentagon
brainly.com/question/929013
#SPJ11
Complete the proof that the point (, −3) does or does not lie on the circle centered at the origin and containing the point (5, 0).
the radius of the circle is
The radius of the circle is 5.
To complete the proof, we need to find the radius of the circle centered at the origin and containing the point (5, 0). We can use the distance formula to find the distance between the origin (0, 0) and the point (5, 0):
distance = √((5 - 0)^2 + (0 - 0)^2) = √25 = 5
Therefore, the radius of the circle is 5.
Now, to determine whether the point (, −3) lies on the circle, we need to find the distance between the origin and the point (, −3):
distance = √((-3 - 0)^2 + (0 - 0)^2) = √9 = 3
Since the distance between the origin and the point (, −3) is not equal to the radius of the circle, which is 5, we can conclude that the point (, −3) does not lie on the circle centered at the origin and containing the point (5, 0).
To learn more about circle, refer below:
https://brainly.com/question/29142813
#SPJ11
a small plane leaves an airport and flies north at 240 mi/hr. a jet leaves the airport 30 minutes later and follows the small plane at 360 mi/hr. how long does it take the jet to overtake the small place?
According to the distance, it will take the jet 1 hour to overtake the small plane.
Let's first calculate the distance traveled by the small plane in the time it takes for the jet to overtake it. Since the small plane is flying for an extra 30 minutes, its travel time is "t + 0.5" hours. Therefore, the distance traveled by the small plane is:
Distance of small plane = Speed of small plane x Time of small plane
Distance of small plane = 240 x (t + 0.5)
Now, let's calculate the distance traveled by the jet in "t" hours:
Distance of jet = Speed of jet x Time of jet
Distance of jet = 360 x t
Since both planes are at the same point at the time of overtaking, we can set the distances traveled by both planes equal to each other:
240 x (t + 0.5) = 360 x t
We can solve for "t" using algebra:
240t + 120 = 360t
120 = 120t
t = 1
To know more about distance here
https://brainly.com/question/4199102
#SPJ4
Building a campfire you start by stacking kindling wood to form a pentagonal pyramid that is 27 centimeters tall. the base area is 965 square centimeters. what is the volume of the campfire pyramid
The volume of the campfire pyramid is approximately 8,175 cubic centimeters. This is found by using the formula for the volume of a pyramid and plugging in the given values for the height and base area of the pentagonal pyramid.
The formula for the volume of a pyramid is
V = (1/3) * base_area * height
where V is the volume, base_area is the area of the base, and height is the height of the pyramid.
In this case, the height of the pyramid is given as 27 cm, and the base area is given as 965 square cm. To find the volume, we can plug these values into the formula
V = (1/3) * 965 cm² * 27 cm
V = 8,175 cm³
Therefore, the volume of the campfire pyramid is 8,175 cubic centimeters.
To know more about volume:
https://brainly.com/question/17615619
#SPJ4
Claire flips a coin 4 times. using the table, what is the probability that the coin will show tails at least once?
2.
number of tails
probability
0
0.06
1
0.25
3
0.25
4
0.06
?
o 0.06
o 0.25
0.69
o 0.94
mark this and return
save and exit
next
sunmit
The probability of flipping a coin and getting tails at least once in four flips is 15/16 or approximately 0.94. (option d).
To determine the probability of flipping a coin and getting tails at least once in four flips, we can use a probability table. The table shows all the possible outcomes of flipping a coin four times.
Flip 1 Flip 2 Flip 3 Flip 4
Outcome 1 H H H H
Outcome 2 H H H T
Outcome 3 H H T H
Outcome 4 H H T T
Outcome 5 H T H H
Outcome 6 H T H T
Outcome 7 H T T H
Outcome 8 H T T T
Outcome 9 T H H H
Outcome 10 T H H T
Outcome 11 T H T H
Outcome 12 T H T T
Outcome 13 T T H H
Outcome 14 T T H T
Outcome 15 T T T H
Outcome 16 T T T T
In the table, H represents heads, and T represents tails. There are 16 possible outcomes when flipping a coin four times. We can see that getting tails at least once is possible in 15 of these outcomes: Outcome 2, Outcome 3, Outcome 4, Outcome 6, Outcome 7, Outcome 8, Outcome 10, Outcome 11, Outcome 12, Outcome 14, Outcome 15, and Outcome 16.
Therefore, the probability of flipping a coin and getting tails at least once in four flips is the number of outcomes where tails appear at least once divided by the total number of outcomes, which is 15/16 or approximately 0.94. (option d).
To know more about probability here
https://brainly.com/question/11234923
#SPJ4
During an elbow flexion exercise, the relative angle at the elbow was 10 degrees at 0. 5s and 120 degrees at 0. 71s. What was the angular velocity of the elbow?
The angular velocity of the elbow during the elbow flexion exercise was approximately 523.81 degrees/s
To calculate the angular velocity of the elbow during an elbow flexion exercise, we'll use the information given about the relative angle at different times. Here's the step-by-step explanation:
First, find the change in relative angle: Δθ = Final angle - Initial angle = 120 degrees - 10 degrees = 110 degrees.
Next, find the change in time: Δt = Final time - Initial time = 0.71s - 0.5s = 0.21s.
Now, calculate the angular velocity: ω = Δθ / Δt = 110 degrees / 0.21s ≈ 523.81 degrees/s.
So, the angular velocity of the elbow during the elbow flexion exercise was approximately 523.81 degrees/s.
Learn more about angular velocity here, https://brainly.com/question/29342095
#SPJ11
The data set shown below represents the number of times some families went out for dinner the previous week. 4, 2, 2, 0, 1, 6, 3, 2, 5, 1, 2, 4, 0, 1 an unnumbered number line labeled numbers of dinners out. create a dot plot to represent the data. what can you conclude about the dot plot of the data set? check all that apply. the range of the number line should be 0 to 7 to represent the frequency. four families said they ate out twice the previous week. one family said they ate out 5 times the previous week. the data set is symmetrical. the median best represents the data set.
Answer: B, C, E
Step-by-step explanation: Other dude posted wrong answer.
ķojo and kofta were given 38000 to share. kojo had 7500 more than kofta find each of their shares Show working
Answer:
Kofta receives $15,250 and Kojo receives $22,750.
Step-by-step explanation:
Let x represent the amount of money that Kofta has.
x + (x +7,500) = 38,000
- 7,500 - 7,500
___________________
x + x = 30,500
2x = 30,500
÷ 2 = ÷2
-------------------
x = 15,250
Therefore, Kofta has $15,250.
Let k represent the amount of money that Kojo has.
k + 15,250 = 38,00
k = 38,000 - 15,250
k = $22,750
Therefore, Kojo has $22,750
Peter eats 3 carrot sticks, with 1 cup of peanut butter, p, every day before lacrosse practice. he practices 4 days a week.
select all the equivalent expressions that represents how much peter eats before practice in one week.
To find out how much Peter eats in one week (which is 7 days), we need to multiply this expression by 7.
How much Peter eats before practice in one week?Peter eats 3 carrot sticks and 1 cup of peanut butter before lacrosse practice every day, so in one day he eats:
3 + p
To find out how much he eats in one week (which is 7 days), we need to multiply this expression by 7:
7(3 + p)
Distributing the 7, we get:
21 + 7p
So the equivalent expressions that represent how much Peter eats before practice in one week are:
3 + 4p + 3p
4(3 + p)
21 + 7p
7(3p + 1)
So the correct answers are:
4(3 + p)
21 + 7p
7(3p + 1)
Learn more about multiply
brainly.com/question/30875464
#SPJ11
As a candle burns, its wick gets smaller over time. When first purchased, the wick is 150 mm in length. After 50 minutes, the wick is only 110 mm in length. Find the slope you would use in a linear model of mm per minute. 3 points Construct an equation that models the length of the wick over this time period. Your answer should be in the proper form using correct letters and numbers with no spaces. 2 points Use your linear model to predict the how many minutes it would take to have 74 mm remaining. 3 points
It would take approximately 95 minutes for the wick to have 74 mm remaining.
1) Finding the slope (mm per minute):
The wick was initially 150 mm in length and reduced to 110 mm after 50 minutes. To find the slope, we use the formula:
Slope = (change in length) / (change in time)
Slope = (110 mm - 150 mm) / (50 minutes - 0 minutes)
Slope = (-40 mm) / (50 minutes)
Slope = -0.8 mm/minute
2) Constructing the linear equation:
We now have the slope (-0.8) and the initial length (150 mm) to create a linear equation:
Length (L) = initial length + slope × time (t)
L = 150 - 0.8t
3) Predicting the time to have 74 mm remaining:
To find the time, plug in 74 mm for the length (L) in the equation and solve for t:
74 = 150 - 0.8t
76 = 0.8t
t = 95 minutes
So, it would take approximately 95 minutes for the wick to have 74 mm remaining.
To learn more about linear, refer below:
https://brainly.com/question/15830007
#SPJ11
please write neatly and check awnser to make sure
Question 4 < > Find the volume of the solid obtained by rotating the region bounded by y 4x2, 1 = 1, and y = 0, about the x-axis. V Submit Question
The volume of the solid obtained by rotating the region bounded about the x-axis is 3π/4 cubic units.
How to find the volume of a solid by rotating a region?To find the volume of the solid obtained by rotating the region bounded by y = 4x^2, y = 1, and y = 0 about the x-axis, we can use the method of cylindrical shells.
First, we need to find the limits of integration. The region is bounded by y = 4x^2 and y = 1, so we can set up the integral as follows:
V = ∫[0,1] 2πx(1-4x^2)dx
Next, we can simplify the integrand:
V = ∫[0,1] 2πx dx - ∫[0,1] 8πx^3 dx
V = π - 2π/4
V = 3π/4
Therefore, the volume of the solid obtained by rotating the region bounded by y = 4x^2, y = 1, and y = 0 about the x-axis is 3π/4 cubic units.
Learn more about the volume of a solid.
brainly.com/question/31329583
#SPJ11
(1 point) Write an equivalent integral with the order of integration reversed ST 2-3 F(x,y) dydc = o g(y) F(x,y) dedy+ So k(y) F(x,y) dardy Jh(v) a- he C- f(y) = g(y) = h(g) = k(y) =
equivalent integral with the order of integration reversed ST 2-3 F(x,y) dydc = o g(y) F(x,y) dedy+ So k(y) F(x,y) dardy Jh(v) a- he C- f(y) = g(y) = h(g) = k(y) = By reversing the order of integration, you've found an equivalent integral to the original one provided.
step-by-step explanation to achieve this, using the terms "integral," "reversed," and "equivalent" in the answer.
Step 1: Identify the original integral
The original integral is given as ∫∫ F(x, y) dy dx, where the integration limits are not explicitly provided. In this case, let's assume the limits of integration for y are from a(x) to b(x), and for x, they are from c to d.
Step 2: Sketch the region of integration
To reverse the order of integration, it's helpful to sketch the region of integration, which is the area in the xy-plane where the function F(x, y) is being integrated.
Step 3: Determine the new limits of integration
After sketching the region, determine the new limits of integration by considering the range of x for a given y value, and the range of y values. Let's assume the new limits for x are from g(y) to h(y), and for y, they are from e to f.
Step 4: Write the equivalent reversed integral
Now, you can write the equivalent integral with the order of integration reversed. In this case, it will be ∫∫ F(x, y) dx dy, with the new limits of integration. The complete reversed integral will look like:
∫(from e to f) [ ∫(from g(y) to h(y)) F(x, y) dx ] dy
By reversing the order of integration, you've found an equivalent integral to the original one provided.
to learn more about integral click here:
https://brainly.com/question/30094386
#SPJ11
Find the area of the shaded region
The area of the shaded region of the circle is 89.75 mi².
What is the area of the shaded region?The area of a sector of a circle, you can use the formula:
A = (θ/360) × π × r²
Where A is the area of the sector, θ is the central angle of the sector, r is the radius of the circle, and π is a constant approximately equal to 3.14.
From the diagram, angle of the unshaded sector equals 150 degree.
Angle of the shaded region = 360 - 150 = 210 degree
Radius r = 7 miles.
We can substitute these values into the formula and solve for the area A.
A = (θ/360) × π × r²
A = ( 210/360 ) × 3.14 × 7²
A = ( 210/360 ) × 3.14 × 49
A = 89.75 mi²
Therefore, the area of the sector is approximately 89.75 mi².
Learn more about area of sector here: https://brainly.com/question/16367606
#SPJ1
The diagram shows a track composed with a semicircle on each end. The area of the rectangle is 5,500 square meters. What is the perimeter of the th rack? Use 3.14 for π
The perimeter of the track is of 377 m.
What is the measure of the circumference of a circle?The circumference of a circle of radius r is given by the equation presented as follows:
C = 2πr.
Considering the rectangle with area 5500 m² and base 110 m, the height h, representing the diameter d of the circumference, is obtained as follows:
110d = 5500
d = 550/11
d = 50 m.
The radius is half the diameter, hence it is given as follows:
r = 25 m.
The perimeter is given as follows:
Circumference of two-half-circles = one circle of radius 25 m.Two segments of 110 m.Hence it is given as follows:
P = 2 x 110 + 2 x 3.14 x 25
P = 377 m.
More can be learned about the circumference of a circle at brainly.com/question/12823137
#SPJ1
(1 point) Evaluate the line integral Sc 2y dx + 2x dy where is the straight line path from (4,3) to (9,6). Jc 2g dc + 2z du =
the value of the line integral ∫_C 2y dx + 2x dy along the straight line path from (4,3) to (9,6) is 84.
To evaluate the line integral ∫_C 2y dx + 2x dy along the straight line path from (4,3) to (9,6), follow these steps:
Step:1. Parametrize the straight line path: Define a vector-valued function r(t) = (1-t)(4,3) + t(9,6) = (4+5t, 3+3t), where 0 ≤ t ≤ 1. Step:2. Calculate the derivatives: dr/dt = (5,3). Step:3. Substitute the parametric equations into the line integral: 2(3+3t)(5) + 2(4+5t)(3). Step:4. Calculate the line integral: ∫(30+30t + 24+30t) dt, where the integration is from 0 to 1. Step:5. Combine the terms and integrate: ∫(54+60t) dt from 0 to 1 = [54t + 30t^2] from 0 to 1.
Step:6. Evaluate the integral at the limits: (54(1) + 30(1)^2) - (54(0) + 30(0)^2) = 54 + 30 = 84.
Learn more about line integral here, https://brainly.com/question/30460707
#SPJ11
Write a system of inequalities whose solution is the set of all points in quadrant I not including the axis's.
The set of all points in quadrant I not including the axis's can be represented by the following system of inequalities:
x > 0
y > 0
Inequalities are useful in modeling situations where there are constraints or limitations. For illustration, in real- life scripts, there may be limited coffers or capacity, or certain variables must fall within a specific range. Systems of inequalities are frequently used to represent these constraints or limitations graphically. One common operation of systems of inequalities is in optimization problems, where the thing is to maximize or minimize a particular function subject to certain constraints.
In these situations, the doable region, or the set of all points that satisfy the constraints, is frequently represented as a shadowed region on a graph. The optimal result is also set up by relating the point( s) within this region that maximize or minimize the function.
Learn more about inequalities at
https://brainly.com/question/30533841
#SPJ4
On March 1 a commodity's spot price is $60 and its August futures price is $59. On July 1 the spot price is $64 and the
August futures price is $63. 50. A company entered into futures contracts on March 1 to hedge its purchase of the
commodity on July 1. It closed out its position on July 1. What is the effective price (after taking account of hedging) paid
by the company?
The effective price paid by the company after taking account of hedging would be $63.50, which is the August futures price on July 1. Calculate the profit or loss on the futures contracts and subtract that from the spot price on July 1, to determine the effective.
By entering into futures contracts on March 1, the company was able to lock in the price of $59 for the commodity, when the spot price was $60 and the futures price was $59, the difference between the futures price and the spot price on March 1 was $1 ($60 - $59), so the company had to pay an extra $1 per unit to hedge its purchase.
When the spot price increased to $64 on July 1, the company was still able to purchase the commodity at the lower hedged price of $59, plus the cost of the futures contract, which resulted in an effective price of $63.50. Overall, hedging helped the company mitigate the risk of price volatility and ensured a more predictable cost for the commodity purchase.
Effective price = Spot price - Profit from futures contracts
Effective price = $64 - $0.50(The difference between the futures price and the spot price on July 1 was $0.50 ($64 - $63.50))
Effective price = $63.50 per unit
Therefore, the effective price paid by the company after taking into account hedging was $63.50 per unit.
To learn more about purchase: https://brainly.com/question/27975123
#SPJ11
A tray of lasagna comes out of the oven at 200°F and is placed on a table
where the surrounding room temperature is 70°F. The temperature T (in °F) of
the lasagna is given by the function (0) -e(486753-1) +70, 0 s t, where tis time
(in hours) after taking the lasagna out of the oven. What is the rate of change
in the temperature of the lasagna exactly 2 hours after taking it out of the
oven?
Rate of change in the temperature of lasagna given by function T(t) = 70 + (200 - 70) × [tex]e^{(-0.0001t)}[/tex] exactly 2 hours after taking it out of oven is -0.013 °F/hour.
Surrounding room temperature is equal to 70°F
Temperature at which lasagna comes out of the oven = 200°F
The temperature T (in °F) of the lasagna at time t (in hours) after taking it out of the oven is equal to,
T(t) = 70 + (200 - 70) × [tex]e^{(-0.0001t)}[/tex]
To find the rate of change in the temperature of the lasagna exactly 2 hours after taking it out of the oven,
Find the derivative of the temperature function with respect to time t.
T'(t) = -0.013[tex]e^{(-0.0001t)}[/tex]
Substituting t = 2 into this expression gives:
T'(2) = -0.013[tex]e^{(-0.0001\times 2)}[/tex]
= -0.013[tex]e^{-0.0002}[/tex]
= -0.013 × 0.99980
= -0.0129974
= -0.013
Therefore, the rate of change in the temperature of the lasagna exactly 2 hours after taking it out of the oven is approximately -0.013 °F/hour.
learn more about temperature here
brainly.com/question/31150261
#SPJ4
The given question is incomplete, I answer the question in general according to my knowledge:
A tray of lasagna comes out of the oven at 200°F and is placed on a table where the surrounding room temperature is 70°F. The temperature T (in °F) of the lasagna is given by the function T(t) = 70 + (200 - 70) × [tex]e^{(-0.0001t)}[/tex] where t is time(in hours) after taking the lasagna out of the oven. What is the rate of change in the temperature of the lasagna exactly 2 hours after taking it out of the oven?
The area of a rooftop can be
expressed as (x + 9)2. The rooftop
is a rectangle with side lengths
that are factors of the expression
describing its area. Which expression
describes the length of one side of
the rooftop?
The expression that describes the length of one side of the rooftop is therefore: x - 9.
What is expression?In mathematics, an expression is a combination of one or more variables, constants, and mathematical operations such as addition, subtraction, multiplication, and division. An expression can be as simple as a single variable or constant, or it can be a more complex combination of variables and operations.
Here,
The expression for the area of the rooftop is (x + 9)², where x is a variable representing the length of one side of the rectangle. To find the factors of this expression, we can expand it using the identity (a+b)² = a² + 2ab + b².
Expanding (x + 9)², we get:
(x + 9)² = x² + 18x + 81
Now, we need to find the factors of this expression that are also factors of the length of the sides of the rectangle. Since the sides of the rectangle must have a common factor of x, we can factor out x from the expression:
x² + 18x + 81 = x(x + 18) + 81
The factors of (x + 9)² are x(x + 18) + 81, (x + 9)(x + 9), (x - 9)(x - 9), and -(x + 9)(x + 9).
Since we are looking for factors that represent the length of one side of the rooftop, we can eliminate the negative factor and the factor (x + 9)(x + 9), since the sides of a rectangle must be positive.
That leaves us with x(x + 18) + 81 and (x - 9)(x - 9).
The expression describes the length of one side of the rooftop: x - 9
This is because the sides of a rectangle must be positive, and (x - 9) is a factor of (x + 9)² that represents a positive length.
To know more about expression,
https://brainly.com/question/1859113
#SPJ1
The mean of 28 numbers is 18.
A number is added and the mean becomes 20.
What’s the new number?
Answer:
76
Step-by-step explanation:
If the mean of 28 numbers is 18 then the sum of those numbers=28×18=504
if one number is added then 29×20=580
the new number therefore=580-504=76
If the range of f (x) = startroot m x endroot and the range of g (x) = m startroot x endroot are the same, which statement is true about the value of m?
The only possible value of m that would make the ranges of f(x) and g(x) the same is any positive real number.
The range of a function is the set of all possible output values. In this case, we are given that the ranges of two functions, f(x) and g(x), are the same.
The function f(x) = √(mx) has a domain of x ≥ 0, since the square root of a negative number is not a real number. The function g(x) = m√x has a domain of x ≥ 0 for the same reason.
To find the range of these functions, we need to consider the possible values of the input x. For f(x), as x increases, the output √(mx) also increases, and as x approaches infinity, so does the output. For g(x), as x increases, the output m√x also increases, and as x approaches infinity, so does the output.
Therefore, if the ranges of f(x) and g(x) are the same, this means that they both have the same maximum and minimum values, and these values are achieved at the same inputs.
In particular, if we consider the minimum value of the range, this is achieved when x = 0, since both functions are defined only for non-negative inputs. At x = 0, we have f(0) = g(0) = 0, so the minimum value of the range is 0.
To find the maximum value of the range, we need to consider the behavior of the functions as x approaches infinity. As noted above, both functions increase without bound as x increases, so the maximum value of the range is infinity.
Therefore, the only possible value of m that would make the ranges of f(x) and g(x) the same is any positive real number.
To know more about startroot and endroot , refer here :
https://brainly.com/question/25996972#
#SPJ11
A dealer paid $10,000 for a boat at an auction. At the dealership, a salesperson sold the boat for 30% more than the auction price. The salesperson received a commission of 25% of the difference between the auction price and the dealership price. What was the salesperson’s commission?
The commission of the salesperson is $750 if he received a commission of 25% of the difference between the auction price and the dealership price.
The salesperson's commission can be calculated by first finding the dealership price, which is 30% more than the auction price of $10,000.
30% of $10,000 = $3,000
Dealership price = $10,000 + $3,000 = $13,000
Next, we need to find the difference between the dealership price and the auction price
$13,000 - $10,000 = $3,000
The salesperson's commission is 25% of this difference
25% of $3,000 = $750
Therefore, the salesperson's commission is $750.
To know more about commission here
https://brainly.com/question/858984
#SPJ1