For each phase change, determine the sign of Δ
H and Δ
S. Place the appropriate items to their respective bins.
a. Sublimation
b. Freezing
c. Boiling
d. Deposition
e. Melting
f. Condensation

The original pressure in the container was 9.028 atm.

To solve this problem, we need to use the combined gas law equation, which relates the pressure, volume, and temperature of a gas. The equation is P1V1/T1 = P2V2/T2, where P1 and V1 are the initial pressure and volume, respectively, and P2 and V2 are the final pressure and volume, respectively.

We are not given the temperature, so we can assume that it is constant.

First, we can rearrange the equation to solve for P1:
P1 = (P2V2/T2) * T1/V1

Substituting the given values, we get:
P1 = (6.10 atm * 3.7 L) / (2.5 L * T2) * T1

Since the temperature is constant, we can cancel it out, and the equation becomes:
P1 = (6.10 atm * 3.7 L) / (2.5 L)

Simplifying, we get:
P1 = 9.028 atm

Therefore, the original pressure in the container was 9.028 atm.

To know more about original pressure, visit:

https://brainly.com/question/1132289#

#SPJ11

The equilibrium constant (K) at 25°C for the reaction of methane with water to form carbon dioxide and hydrogen is 8.04×10⁻¹³. This indicates that the reaction strongly favors the reactants, and very little of the products will be formed at equilibrium.

To calculate the equilibrium constant at 25°C for the reaction of methane with water to form carbon dioxide and hydrogen, we use the formula:

[tex]Kc = \left(\frac{{[CO_2][H_2]^4}}{{[CH_4][H_2O]^2}}\right)[/tex]

where [ ] denotes concentration in moles per liter. We need to first determine the concentrations of the various species at equilibrium. For this, we use the Gibbs free energy change (ΔG) of the reaction, which is related to the equilibrium constant through the equation:

[tex]\Delta G^\circ = -RT \ln(Kc)[/tex]

where R is the gas constant (8.314 J/K mol), T is the temperature in Kelvin (25°C = 298 K), and ΔG° is the standard free energy change for the reaction, which can be calculated from the standard free energy of formation (ΔGf°) values of the reactants and products:

[tex]\Delta G^\circ = \sum n\Delta G_f^\circ(\text{products}) - \sum m\Delta G_f^\circ(\text{reactants})[/tex]

where n and m are the stoichiometric coefficients of the products and reactants, respectively. Using the given values, we get:

[tex]\Delta G^\circ = [1(-394.4) + 4(0)] - [1(-50.81) + 1(-241.8) + 2(0)][/tex]

ΔG° = -805.37 J/mol

Substituting this value and the other given values into the equation for ΔG°, we get:

[tex]Kc = e^(-ΔG°/RT)[/tex]

[tex]Kc = e^(-805.37/(8.314×298))[/tex]

Kc = 8.04×10⁻¹

Therefore, the equilibrium constant at 25°C for the reaction of methane with water to form carbon dioxide and hydrogen is 8.04×10⁻¹³.

To know more about the  equilibrium constant refer here :

https://brainly.com/question/19671384#

#SPJ11

Answer:

Reduction

Explanation:

The concept Boyle's law is used here to determine the new pressure of air inside the balloon. For a gas the relationship between volume and pressure is expressed using Boyle's law. The new pressure is 400 kPa.

The Boyle's law states that at constant temperature, the volume of a given mass of gas is inversely proportional to its pressure. The product of pressure and volume of a given mass of gas is constant.

Mathematically PV = k

P₁V₁ = P₂V₂

P₂ = P₁V₁ / V₂

100 × 4 / 1 = 400 kPa

To know more about Boyle's law, visit;

https://brainly.com/question/30367067

#SPJ1

To produce exactly 3.50 g of NaCl, we need 5.00 g of NaHCO3 and 2.18 g of HCl.

To find how much of the reactant is needed we need to use stoichiometry for finding the solution.

The balanced equation is : [tex]NaHCO_3 + HCl \rightarrow NaCl + CO_2 + H_2O[/tex]

We need to produce exactly 3.50 g NaCl. Now from the balanced equation, we can see that the molar ratio of [tex]NaHCO_3[/tex] to NaCl is 1:1. Therefore, we can  use the molar mass of NaCl to find the moles of NaCl that correspond to 3.50 g:

molar mass of NaCl = 58.44 g/mol

moles of NaCl = 3.5 / 58.44 = 0.0598 mol NaCl

As the molar ratio of [tex]NaHCO_3[/tex] to NaCl is 1:1, therefore we need 0.0598 mol of [tex]NaHCO_3[/tex]. Similarly, the molar ratio of HCl to [tex]NaHCO_3[/tex] is 1:1. Therefore, we need 0.0598 mol of HCl.

Now we can use the molar mass of each element to find the mass of each reactant required.

molar mass of [tex]NaHCO_3[/tex] = 84.01 g/mol

mass of [tex]NaHCO_3[/tex] = 0.0598 mol × 84.01 g/mol = 5.00 g

molar mass of HCl = 36.46 g/mol

mass of HCl = 0.0598 mol × 36.46 g/mol = 2.18 g

Therefore, to produce exactly 3.50 g of NaCl, we need 5.00 g of [tex]NaHCO_3[/tex] and 2.18 g of HCl.

Learn more about stoichiometry at:

https://brainly.com/question/30820349

#SPJ1

The new volume of the gas at STP is 163.8 mL. The pressure in the aerosol can at a temperature of 60 C is 8.4 atm. The volume of nitrogen at STP is 558.8 mL.

1. To solve for the new volume of the gas at STP, we can use the combined gas law equation:

(P1 x V1)/T1 = (P2 x V2)/T2

where P1, V1, and T1 are the initial pressure, volume, and temperature, respectively, and P2 and T2 are the new pressure and temperature, respectively, at STP. We know that STP is defined as 1 atm and 273 K.

Plugging in the given values, we get:

(6 atm x 10 mL)/100 K = (1 atm x V2)/273 K

Simplifying and solving for V2, we get:

V2 = (6 atm x 10 mL x 273 K)/(100 K x 1 atm) = 163.8 mL

Therefore, the new volume of the gas at STP is 163.8 mL.

2.To solve for the pressure in the aerosol can at a temperature of 60 C, we can use the combined gas law equation again:

(P1 x V1)/T1 = (P2 x V2)/T2

where P1, V1, and T1 are the initial pressure, volume, and temperature, respectively, and P2 and T2 are the new pressure and temperature, respectively, at 60 C. We know that V1 is constant since the can is sealed.

Plugging in the given values, we get:

(8 atm x V1)/318 K = (P2 x V1)/333 K

Simplifying and solving for P2, we get:

P2 = (8 atm x 333 K)/(318 K) = 8.4 atm

Therefore, the pressure in the aerosol can at a temperature of 60 C is 8.4 atm.

3. To solve for the volume of nitrogen at STP, we can use the combined gas law equation again:

(P1 x V1)/T1 = (P2 x V2)/T2

where P1, V1, and T1 are the initial pressure, volume, and temperature, respectively, and P2 and T2 are the new pressure and temperature, respectively, at STP. We know that P1 is constant since it is given that the pressure is constant.

Plugging in the given values and using the values for STP, we get:

(1 atm x 600 mL)/(293 K) = (P2 x V2)/(273 K)

Simplifying and solving for V2, we get:

V2 = (1 atm x 600 mL x 273 K)/(293 K) = 558.8 mL

Therefore, the volume of nitrogen at STP is 558.8 mL.

To know more about aerosol refer to-

https://brainly.com/question/29418985

#SPJ11

The molarity of the sodium hydroxide, NaOH, needed to react with 15.7 mL of 0.700 M H₃PO₄, is 0.753 M

The molarity of the sodium hydroxide, NaOH, needed can be obtained as shown below:

3NaOH + H₃PO₄ —> Na₃PO₄ + 3H₂O

MaVa / MbVb = nA / nB

(0.7 × 15.7) / (Mb × 43.8) = 1 / 3

Cross multiply

Mb × 43.8 = 0.7 × 15.7 × 3

Divide both side by 43.8

Mb = (0.7 × 15.7 × 3) / 43.8

Mb = 0.753 M

Thus, we can conclude that the molarity of the NaOH needed is 0.753 M

Learn more about molarity:

https://brainly.com/question/13386686

#SPJ1

The equilibrium will shift in favour of the products as a result of the addition of NaOH, producing more [tex]NH_4^+[/tex] and [tex]OH^-[/tex] ions. This will raise the solution's pH.

An increase in the concentration of one of the ions dissociated in the solution by the addition of another species containing the same ion will result in an increase in the degree of association of ions in a solution where there are several species associating with each other via a chemical equilibrium process. The equilibrium will shift in favour of the products as a result of the addition of NaOH, producing more [tex]NH_4^+[/tex] and [tex]OH^-[/tex] ions. This will raise the solution's pH.

To know more about equilibrium, here:

https://brainly.com/question/30694482

#SPJ12

To determine the empirical formula of the compound, we need to first find the moles of each element present in the compound:

moles of Al = 94.5 g / 26.98 g/mol = 3.50 mol

moles of F = 199.5 g / 18.99 g/mol = 10.50 mol

Next, we need to find the ratio of the moles of each element in the compound by dividing by the smallest number of moles. In this case, the smallest number of moles is 3.50 mol:

moles of Al = 3.50 mol / 3.50 mol = 1

moles of F = 10.50 mol / 3.50 mol = 3

The empirical formula of the compound is therefore AlF3.

To know more about empirical refer here

https://brainly.com/question/977538#

#SPJ11

During the discharge of a lead-acid battery, the oxidation reaction occurs at the anode where lead (Pb) is converted into lead sulfate (PbSO4) and electrons are released:
Pb(s) → PbSO4(s) + 2e-

Meanwhile, reduction occurs at the cathode where lead dioxide (PbO2) is reduced to lead sulfate (PbSO4) by gaining those electrons released at the anode:
PbO2(s) + 4H+(aq) + 2e- → PbSO4(s) + 2H2O(l)
The balanced chemical equation shows that for every two electrons transferred at the anode, one molecule of PbSO4 is formed. Therefore, the 378 grams of Pb from the anode would produce 378/207 = 1.82 moles of PbSO4.
Since the reaction at the cathode involves the reduction of PbO2 to PbSO4, the same number of moles of PbSO4 should be formed at the cathode. The molar mass of PbO2 is 239.2 g/mol, so the mass of PbO2 that is reduced at the cathode would be:
1.82 moles x 239.2 g/mol = 435.8 g
Therefore, during the same period of discharge, 435.8 grams of PbO2 would be reduced at the cathode.

For more questions on: oxidation

https://brainly.com/question/4222605

#SPJ11

The percent composition of the sample containing 1.29 grams of carbon and 1.71 grams of oxygen is 43% carbon and 57% oxygen.

The percent composition of a sample can be calculated by dividing the mass of each element in the sample by the total mass of the sample and then multiplying by 100%.

To find the percent composition of a sample containing 1.29 grams of carbon and 1.71 grams of oxygen, we need to calculate the total mass of the sample first.

Total mass of the sample = mass of carbon + mass of oxygen
= 1.29 grams + 1.71 grams
= 3 grams

Now, we can calculate the percent composition of carbon and oxygen in the sample:

Percent composition of oxygen = (mass of oxygen / total mass of the sample) x 100%
= (1.71 grams / 3 grams) x 100%
= 57%

Percent composition of carbon =  (mass of carbon / total mass of the sample) x 100%

=(1.29 grams / 3 grams) x 100%

= 43%

Therefore, the sample contains 43% carbon and 57% oxygen by mass.

To learn more about percent composition visit:

https://brainly.com/question/20393858

#SPJ11

The best way to cook a spiral ham without drying it out is to use the low and slow method.

A method is a procedure or a technique used to produce the intended results. It is a methodical technique to problem solving that entails dividing a task into smaller components and carrying them out in a specified manner.

Methods are employed in every aspect of life, including commerce, engineering, and mathematics. In the sciences, where the scientific method is applied to test hypotheses and derive conclusions, methods are particularly crucial.

This entails cooking the gammon for a longer amount of time (approximately 15 minutes per pound) at a low temperature (about 325°F). Remove the gammon from its plastic wrapper before cooking it, and set it in a shallow roasting pan.

After that, cover the ham with foil, making sure that it is tightly sealed. Then, place the ham in the oven and cook it for the recommended length of time. Lastly, about 10 minutes before the end of the cooking time, remove the foil and brush the ham with a glaze of your choosing. This will help add flavor and moisture to the ham and help keep it from drying out.

To learn more about spiral ham

https://brainly.com/question/30518035

#SPJ4

We can use the formula for calculating heat:

Q = m × c × ΔT

where Q is the amount of heat transferred, m is the mass of the substance, c is its specific heat, and ΔT is the change in temperature.

Plugging in the given values, we get:

8250 J = m × 0.9025 J/g ·°C × 40.0 °C

Simplifying, we get:

8250 J = m × 36.1 J/g

Solving for m, we get:

m = 8250 J ÷ 36.1 J/g

m ≈ 228.26 g

Therefore, the mass of the aluminum is approximately 228.26 g.

To know more about calculating refer here

https://brainly.com/question/30151794#

#SPJ11

In this case, the error is 0%, indicating that your experimental value is identical to the known value.

To calculate the error between your calculated specific heat of each metal and the known values in Table C, you can use the following formula:

Error = [(Calculated specific heat of metal - Known specific heat of metal) / Known specific heat of metal] x 100

Here are the steps to follow:

Look up the known specific heat of each metal in Table C.

Calculate the specific heat of each metal using your experimental data.

Substitute the known and calculated specific heats of each metal into the formula above.

Calculate the error for each metal by performing the subtraction and division operations.

Multiply the result by 100 to express the error as a percentage.

For example, let's say you conducted an experiment to measure the specific heat of copper and obtained a value of 0.39 J/g°C. The known specific heat of copper from Table C is 0.39 J/g°C.

To calculate the error:

Error = [(0.39 J/g°C - 0.39 J/g°C) / 0.39 J/g°C] x 100

Error = 0 / 0.39 J/g°C x 100

Error = 0%

To know more about experimental value refer to-

https://brainly.com/question/10416781

#SPJ11

Manganese(IV) permanganate is a chemical compound with the formula [tex]MnO4[/tex]. It is an ionic compound that consists of one manganese atom and four oxygen atoms.

The oxidation state of manganese in the compound is +7, which means that it has lost seven electrons and has seven fewer electrons than the neutral atom. The oxidation state of oxygen in the compound is -2, which means that each oxygen atom has gained two electrons.

To calculate the number of moles of oxygen in one mole of manganese(IV) permanganate, we can use the molecular formula of the compound, which tells us that there are four oxygen atoms per one manganese atom. Therefore, the molar ratio of oxygen to manganese is 4:1.

So, one mole of manganese(IV) permanganate contains four moles of oxygen. This can be written as:

1 mole [tex]MnO4[/tex] = 4 moles O2

This means that if we have one mole of manganese(IV) permanganate, we would have four moles of oxygen atoms.

To know more about oxidation state refer to-

https://brainly.com/question/31688257

#SPJ11

When hydrogen and steam are both present in a gas at the same pressure and temperature, this is the ideal gas condition. This is so because according to the ideal gas law, an ideal gas's pressure, volume, and temperature are all precisely proportional to one another.

This indicates that when the two gases have the same temperature and pressure, the two gases will also have the same volume. As a result, the gases are in their ideal state, having the same volume and pressure but retaining their distinct chemical compositions.

This is perfect because it enables the two gases to interact with one another in a predictable way, allowing for the measurement and prediction of the gases' behaviour.

Learn more about  gases  at:

https://brainly.com/question/1369730

#SPJ1

Part A: 0.568 L, Part B: 0.071 L, Part C: 0.140 L

Part A: To find the volume of the 0.211 M KCl solution that contains 0.12 mol of KCl, use the formula:

M = mol / L
0.211 M = 0.12 mol / volume

Rearranging the formula and solving for the volume:

Volume = 0.12 mol / 0.211 M = 0.568 L

Part B: To find the volume of the 1.7 M KCl solution that contains 0.12 mol of KCl:

1.7 M = 0.12 mol / volume

Volume = 0.12 mol / 1.7 M = 0.071 L

Part C: To find the volume of the 0.855 M KCl solution that contains 0.12 mol of KCl:

0.855 M = 0.12 mol / volume

Volume = 0.12 mol / 0.855 M = 0.140 L

So, the volumes containing 0.12 mol of KCl are as follows:
Part A: 0.568 L
Part B: 0.071 L
Part C: 0.140 L

To learn more about solution, refer below:

https://brainly.com/question/30665317

#SPJ11

The patterns in the periodic table concerning protons, electrons, and valence electrons can help us understand the properties of elements, including whether they are metals or nonmetals. The position of an element in the table and the number of valence electrons it possesses are crucial factors in determining its behavior and reactivity.

Patterns in the periodic table in terms of protons, electrons, and valence electrons, and how these might relate to an element being a metal or nonmetal.

In the periodic table, you'll notice the following patterns:

1. The number of protons (also known as the atomic number) increases by one from left to right across a period and down a group. This is because each element has one more proton than the element before it.

2. The number of electrons in a neutral atom is equal to the number of protons, so the electron count also increases by one across a period and down a group.

3. Valence electrons are the outermost electrons of an atom, and they play a significant role in chemical bonding. As you move from left to right across a period, the number of valence electrons increases from 1 to 8. In contrast, when you move down a group, the number of valence electrons remains the same.

Now, let's discuss how these patterns relate to an element being a metal or nonmetal:

1. Metals are typically found on the left side of the periodic table, while nonmetals are on the right side. This is because metals generally have fewer valence electrons (1 to 3) and are more likely to lose them in a chemical reaction. Nonmetals have more valence electrons (4 to 8) and are more likely to gain or share them.

2. The number of valence electrons determines the reactivity and bonding behavior of elements. Metals with fewer valence electrons are more reactive, while nonmetals with more valence electrons are less reactive.

In conclusion, the patterns in the periodic table concerning protons, electrons, and valence electrons can help us understand the properties of elements, including whether they are metals or nonmetals. The position of an element in the table and the number of valence electrons it possesses are crucial factors in determining its behavior and reactivity.

To know more about metal and nonmetal :

https://brainly.com/question/13963963

#SPJ11

No, it is not true that the hospital accidentally switched babies. The trait is most likely due to the inheritance of two recessive alleles.

Toad's family being purebred dominant for red spots on their white cap means that they have two copies of the dominant allele for red spots on their cap.

However, Toadette may carry one copy of the dominant allele and one copy of the recessive allele for white spots on the cap. If Toad also carries one copy of the recessive allele, there is a chance that their offspring may inherit the recessive allele from both parents, resulting in a white cap with white spots.

Therefore, it is entirely possible for Little Toad to inherit the recessive allele for white spots from Toadette and Toad and display the trait. There is no need to suspect the hospital of switching babies as the genetics of the situation explains the observed outcome.

More on recessive inheritance can be found here: https://brainly.com/question/15481938

#SPJ1

The process of carbon dioxide getting into the atmosphere primarily occurs through natural processes like respiration, volcanic eruptions, and decay of organic matter.

However, human activities like burning of fossil fuels and deforestation have significantly increased the levels of carbon dioxide in the atmosphere. When these fuels are burned, they release carbon dioxide into the air, which contributes to the greenhouse effect, trapping heat in the atmosphere and leading to global warming. Additionally, deforestation reduces the number of trees that absorb carbon dioxide through photosynthesis, further exacerbating the problem.

Overall, the process of carbon dioxide getting into the atmosphere is a complex interaction between natural and human-induced factors that have significant impacts on our planet.

For more questions on: atmosphere

https://brainly.com/question/31359226

#SPJ11

Starting with 29.25 g of NaOH and 107 g of FeCl₃, the limiting reactant is NaOH with yeild percentage of 60%.

To find the reaction yield and the limiting reactant, starting with 29.25 g of NaOH and 107 g of FeCl₃, you need to perform the following steps:

1. Write the balanced chemical equation:
FeCl₃ + 3NaOH → Fe(OH)₃ + 3NaCl

2. Calculate moles of each reactant:
NaOH: 29.25 g / (23.0 g/mol Na + 15.99 g/mol O + 1.01 g/mol H) ≈ 0.729 moles
FeCl₃: 107 g / (55.85 g/mol Fe + 3 * 35.45 g/mol Cl) ≈ 0.397 moles

3. Identify the limiting reactant:
For every mole of FeCl₃, you need 3 moles of NaOH. Divide moles of each reactant by their coefficients in the balanced equation:
NaOH: 0.729 moles / 3 ≈ 0.243
FeCl₃: 0.397 moles / 1 ≈ 0.397

The smaller value is for NaOH, so it is the limiting reactant.

To know more about limiting reactant click on below link:

https://brainly.com/question/14225536#

#SPJ11

0.06 moles of glucose can be broken down with 0.36 moles of oxygen.

To determine how many moles of glucose can be broken down with 0.36 moles of oxygen, we can use the stoichiometry of the reaction: C₆H₁₂O₆ + 6O₂ --> 6CO₂ + 6H₂O.

Step 1: Write the balanced equation.
C₆H₁₂O₆ + 6O₂ --> 6CO₂ + 6H₂O

Step 2: Identify the given amount and the substance you need to find.
Given: 0.36 moles of O₂
Find: moles of glucose (C₆H₁₂O₆)

Step 3: Use the stoichiometry from the balanced equation to find the moles of glucose.
According to the balanced equation, 6 moles of O₂ are required to break down 1 mole of glucose.

Step 4: Calculate the moles of glucose.
(0.36 moles O₂) x (1 mole glucose / 6 moles O₂) = 0.06 moles of glucose

Learn more about glucose at https://brainly.com/question/454703

#SPJ11

After three half-lives have passed, 2.50 g of the radioisotope would remain out of the initial 20.0 g.

If a radioisotope has a half-life of t, then the amount of the radioisotope that remains after n half-lives can be calculated using the formula:

[tex]N = N0 * (1/2)^n[/tex]

where N0 is the initial amount of the radioisotope.

If three half-lives have passed, then n = 3. Using the given initial amount of 20.0 g, we can calculate the amount that remains after three half-lives as follows:

[tex]N = N0 * (1/2)^n\\N = 20.0 g * (1/2)^3[/tex]

N = 20.0 g * (1/8)

N = 2.50 g

Therefore, after three half-lives have passed, 2.50 g of the radioisotope would remain out of the initial 20.0 g.

To know more about radioisotope refer to-

https://brainly.com/question/13076859

#SPJ11

It is False to state that an Absolute brightness scale is called apparent magnitude.

The brightness of a star as seen from Earth is described by apparent magnitude.  It is determined by the size of the star and its distance from Earth.  On a scale of (-26.8 to +29), Negative values are low in bright stars. The Sun (apparent magnitude -26.8) is the brightest star in the sky.

The absolute magnitude scale is the same as the apparent magnitude scale, with a difference in brightness of 1 magnitude = 2.512 times. This logarithmic scale is likewise unitless and open-ended. Again, the brighter the star, the lower or more negative the value of M.

Learn more about apparent magnitude:
https://brainly.com/question/28874252
#SPJ1

Full Question:

An Absolute brightness scale is called apparent magnitude.
True or False?

To manipulate seven additional data sets and place these values in your Ocean Interactions, follow these steps:
Step 1: Obtain the data sets
First, acquire the seven additional data sets that you want to include in your Ocean Interactions analysis. These data sets could be related to variables such as temperature, salinity, ocean currents, or marine life distributions.

Step 2: Organize the data
Next, organize the data sets by sorting, filtering, or aggregating them as needed to make them more manageable for analysis. This process may involve cleaning the data to remove any inconsistencies or errors, as well as converting the data into a compatible format for further manipulation.

Step 3: Manipulate the data
Using various data manipulation techniques, transform the additional data sets to create new variables or features that can help provide a deeper understanding of the Ocean Interactions. This manipulation could include calculations, statistical analysis, or creating visual representations to identify patterns or trends within the data.

Step 4: Integrate the data
Combine the manipulated additional data sets with the existing Ocean Interactions data to create a comprehensive analysis. This integration process may involve merging or joining data sets based on common variables or geographical locations, ensuring that the resulting data accurately reflects the interactions between various ocean-related factors.

Step 5: Analyze the data
With the additional data sets now integrated into your Ocean Interactions analysis, examine the relationships between the different variables to gain insights into the complex dynamics at play. This analysis could involve statistical tests, correlations, or predictive modeling techniques to better understand the underlying patterns and trends in the data.

Step 6: Interpret the results
Based on the analysis, draw conclusions about the role of the additional data sets in the overall Ocean Interactions. This interpretation should consider the potential implications of these findings for the broader understanding of ocean processes and the management of marine ecosystems.

By following these steps, you will successfully manipulate seven additional data sets and place these values in your Ocean Interactions analysis, enhancing your understanding of the complex dynamics involved in the marine environment.

To know more about Ocean Interactions refer here

https://brainly.com/question/30919252#

#SPJ11

Answer:

Molecular weight of CH4 is 16 CH4 has four hydrogen atoms 1 mole of a compound contain 6.023*1023 atoms 12 gm of CH4 = 0

In your gas sample, there are approximately 1.21 moles of gas.

To determine the number of moles of gas in the sample, you can use the ideal gas law formula: PV = nRT. In this formula, P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant (0.0821 L atm/mol K), and T is the temperature in Kelvin.

1. Convert the pressure to atm: (1663 mmHg) * (1 atm/760 mmHg) = 2.19 atm.

2. Convert the temperature to Kelvin: (83°C) + 273.15 = 356.15 K.

3. Rearrange the formula to solve for n: n = PV/RT.

4. Plug in the values: n = (2.19 atm) * (22.4 L) / (0.0821 L atm/mol K) * (356.15 K).

5. Calculate the number of moles: n = 1.21 moles (rounded to two decimal places).

To know more about ideal gas law click on below link:

https://brainly.com/question/28257995#

#SPJ11

The heat of combustion of methane is -802.41 kJ/mol, indicating that the combustion of methane is an exothermic reaction that releases heat energy.

To calculate the heat of combustion of methane, we can use formula:

q = (m_water x C_water x ΔT) + (C_cal x ΔT)

Plugging in the values, we get:

q = (1000 g x 4.184 J/g°C x 17.4°C) + (615 J/°C x 17.4°C)

q = 21997.45 J

Next, we need to calculate the number of moles of methane burned:

moles [tex]CH_4[/tex] = mass [tex]CH_4[/tex] / molar mass [tex]CH_4[/tex]

moles [tex]CH_4[/tex] = 65 g / 16.04 g/mol

moles [tex]CH_4[/tex] = 4.05 mol

Finally, we can calculate the heat of combustion per mole of methane:

ΔH = q / moles [tex]CH_4[/tex]

ΔH = -802.41 kJ/mol

To know more about exothermic reaction, here

brainly.com/question/10373907

#SPJ4

--The complete Question is, 1. 65g of methane CH4 is burned in a bomb calorimeter containing 1000 grams of water. The initial temperature of water is 18. 98oC. The specific heat of water is 4. 184 J/g oC. The heat capacity of the calorimeter is 615 J/ oC. After the reaction the final temperature of the water is 36. 38oC.--

Answer:

i. 0.50 mol CO2

ii. 332.94g CaCl2

Explanation:

CaCO3 + 2HCl -> CaCl2 + CO2 + H2O

i. 36.5g HCl * 1 mol HCl/36.46g HCl * 1 mol CO2/2 mol HCl  = 0.50 mol CO2

ii. 3 mol CaCO3 * 1 mol CaCl2/1 mol CaCO3 * 110.98g CaCl2/1 mol CaCl2 = 332.94g CaCl2