The correct value for the ratio of the viscous loss to the kinetic loss is approximately (d) 10.71.
To calculate the ratio of the viscous loss to the kinetic loss for liquid flowing through a packed bed, we need to use the Ergun equation, which relates the pressure drop in a packed bed to the fluid flow characteristics.
The Ergun equation is given by:
ΔP = 150 (1 - ε)² μ u / d p² + 1.75 (1 - ε) ρ u² / d p
Where:
ΔP is the pressure drop (Pa)
ε is the porosity of the bed
μ is the viscosity of the fluid (Pa.s or N.s/m²)
u is the superficial velocity of the fluid (m/s)
d_p is the average particle diameter (m)
ρ is the density of the fluid (kg/m³)
To calculate the ratio of viscous loss to kinetic loss, we need to compare the two terms in the Ergun equation. The ratio is given by:
Ratio = (150 (1 - ε)² μ u / d p²) / (1.75 (1 - ε) ρ u² / d p)
Substituting the given values:
ε = 0.5
μ = 1 × 10⁻³ kg/m.s
u = 0.005 m/s
d p = 1 × 10⁻³ m
ρ = 1000 kg/m³
Ratio = (150 (1 - 0.5)² (1 × 10⁻³) (0.005) / (1 × 10⁻³)²) / (1.75 (1 - 0.5) (1000) (0.005)² / (1 × 10⁻³))
Simplifying the expression:
Ratio = (150 (0.5)² (1 × 10⁻³) (0.005) / (1 × 10⁻³)²) / (1.75 (0.5) (1000) (0.005)² / (1 × 10⁻³))
Ratio = 10.71
Therefore, the correct value for the ratio of the viscous loss to the kinetic loss is approximately 10.71.
To know more about viscous loss click here :
https://brainly.com/question/20115234
#SPJ4
Use the following conversion factors to answer the question:
1 bolt of cloth = 120 ft,1 meter = 3.28 ft,
1 hand = 4 inches,1 ft = 12 inches.
If a horse stands 15 hands high, what is its height in meters?
a horse that stands 15 hands high has a height of approximately 1.524 meters.
To convert the height of the horse from hands to meters, we'll use the given conversion factors:
1 hand = 4 inches
1 ft = 12 inches
1 meter = 3.28 ft
First, we need to convert the height from hands to inches:
15 hands * 4 inches/hand = 60 inches
Next, we'll convert inches to feet:
60 inches / 12 inches/ft = 5 ft
Finally, we'll convert feet to meters:
5 ft * (1 meter / 3.28 ft) ≈ 1.524 meters
To know more about factors visit:
brainly.com/question/14549998
#SPJ11
Given the following the equation: f(x): s+1 /s² + s +1 2.1. Find the poles and zero analytically 2.2. Using OCTAVE plot the poles and zeros of the above equation
The given equation f(x) = (s + 1) / (s² + s + 1) does not have any real-valued poles or zeros. Therefore, there is nothing to plot using Octave or any other graphing tool.
To find the poles and zero of the given equation f(x) = (s + 1) / (s² + s + 1), we can set the denominator equal to zero and solve for the values of s that make the denominator equal to zero.
2.1. Finding the poles and zero analytically:
The denominator of the equation is s² + s + 1. To find the poles, we solve for s:
s² + s + 1 = 0
Using the quadratic formula, we have:
s = (-b ± √(b² - 4ac)) / (2a)
In this case, a = 1, b = 1, and c = 1. Substituting these values into the quadratic formula, we get:
s = (-1 ± √(1 - 4(1)(1))) / (2(1))
= (-1 ± √(-3)) / 2
Since the discriminant (-3) is negative, the equation does not have any real solutions. Therefore, we can state that there exisits no real-valued poles or zeros for this equation.
2.2. Plotting the poles and zeros using Octave, we get:
Since there are no real-valued poles or zeros, there is nothing to plot in this case.
Please note that the given equation does not have any real-valued poles or zeros.
To learn more about equations visit : https://brainly.com/question/2030026
#SPJ11
[Line integral] For a closed curve C which is the boundary of the region R in the first quadrant determined by the graphs of y = 0, y = √x, and y = -x+ 2. Calculate (a) f 4xy dy - 2y² dx (b) SSR 8y dA Answer: (a) 10/3, (b) 10/3
The value of the line integral f 4xy dy - 2y² dx over the closed curve C is 10/3.
The value of the line integral SSR 8y dA over the region R bounded by the curve C is also 10/3.In the given problem, we are asked to calculate the line integrals over the closed curve C and the region R bounded by that curve.
(a) To evaluate the line integral f 4xy dy - 2y² dx over the closed curve C, we need to parameterize the curve and then integrate the given function over that curve.
Since the curve C is the boundary of the region R, we can parameterize it by using the equations of the boundary lines. By setting y = 0, y = √x, and y = -x + 2, we can express the curve C as a combination of these lines. Substituting these values into the line integral, we can evaluate the integral and obtain the result of 10/3.
(b) The line integral SSR 8y dA represents the line integral of the function 8y over the region R bounded by the curve C. To calculate this integral, we need to express the region R in terms of the variables x and y. By considering the intersection points of the curves y = 0, y = √x, and y = -x + 2, we can determine the limits of integration for x and y. Integrating the function 8y over the region R, we find that the value of the line integral is also 10/3.
In conclusion, both line integrals (a) and (b) have the value of 10/3 when evaluated over the closed curve C and the region R, respectively.
Learn more about Integral
brainly.com/question/31433890
#SPJ11
Can you solve this please?
Answer:
x = 4°
∠PAR = 66°
Step-by-step explanation:
Since ∠GAU and ∠KAR are vertical angles, they are equal
∠GAU = ∠KAR
⇒ 6x = 2x + 16
⇒ 4x = 16
⇒ x = 4
Given ∠KAP = 90
Also, ∠KAP = ∠PAR + ∠KAR
⇒ 90 = ∠PAR + 2x + 16
⇒ ∠PAR = 90 - 2x - 16
= 90 - 2(4) -16
= 90 -8 -16
⇒ ∠PAR = 66°
Use the transformation x = u and y = uv where R is the region bounded by the triangle with vertices (1,1), (7,4) and (1,2). For above problem, complete the following steps, showing all relevant work for another student to follow: a) Sketch and shade region R in the xy-plane. b) Label each of your curve segments that bound region R with their equation and domain. c) Find the image of R in uv-coordinates. d) Sketch and shade set S in the uv-plane
Equation for AB in uv-coordinates: v = 3/2u - 1/2, Equation for AC in uv-coordinates: v = u + 1, Equation for CB in uv-coordinates: v = 2/3u - 2/3.
Given Information: Region R is bounded by the triangle with vertices (1, 1), (7, 4), and (1, 2).
Transformation: x = u and y = uv
Step-by-step solution:
a) Sketch and shade region R in the xy-plane.
The vertices of the triangle are (1,1), (7,4) and (1,2).
b) Label each of your curve segments that bound region R with their equation and domain.
Equations and domains for the curve segments are given below:
Domain for AB: 1 ≤ x ≤ 7
Equation for line AB: y = (3/2)x - 1/2
Domain for AC: 1 ≤ x ≤ 1
Equation for line AC: y = x + 1
Domain for CB: 1 ≤ x ≤ 7
Equation for line CB: y = (2/3)(x + 1) - 1
c) Find the image of R in uv-coordinates.
The transformation is given by: x = u and y = uv
Replacing x and y in AB, AC, and CB lines we get:
Domain for u: 1 ≤ u ≤ 7
Domain for v: 0 ≤ v ≤ 3u - 2
Equation for AB in uv-coordinates: v = 3/2u - 1/2
Equation for AC in uv-coordinates: v = u + 1
Equation for CB in uv-coordinates: v = 2/3u - 2/3
To know more about Equation visit:
https://brainly.com/question/29538993
#SPJ11
A monopolist faces the following demand curve, marginal revenue curve, total cost curve and marginal cost curve for his product: Q = 200 – 2P MR = 100 – Q TC = 5Q MC = 5 5.1 What is the total profit earned? Show your calculations.
The total profit earned by the monopolist is $4,512.5..
To calculate the total profit, we need to find the quantity and price at which the monopolist maximizes its profit. This occurs where marginal revenue (MR) equals marginal cost (MC). Given the following equations:
Demand Curve: Q = 200 - 2P
Marginal Revenue Curve: MR = 100 - Q
Total Cost Curve: TC = 5Q
Marginal Cost Curve: MC = 5
To find the quantity at which MR equals MC, we set MR equal to MC and solve for Q:
100 - Q = 5
Q = 95
Substituting Q back into the demand curve, we can find the corresponding price (P):
Q = 200 - 2P
95 = 200 - 2P
2P = 200 - 95
2P = 105
P = 52.5
Now we have the quantity (Q = 95) and the price (P = 52.5) that maximize the monopolist's profit. To calculate the total profit, we subtract total cost (TC) from total revenue (TR).
Total Revenue (TR) is given by the price multiplied by the quantity:
TR = P * Q
TR = 52.5 * 95
TR = $4,987.5
Total Cost (TC) is given by the equation TC = 5Q:
TC = 5 * 95
TC = $475
Total Profit (π) is calculated by subtracting TC from TR:
π = TR - TC
π = $4,987.5 - $475
π = $4,512.5
Therefore, the total profit earned by the monopolist is $4,512.5.
Learn more about marginal cost (MC): https://brainly.com/question/17230008
#SPJ11
The Chemical Industry is one the most diverse manufacturing industries and is concerned with
the manufacture of a wide variety of solid, liquid, and gaseous materials. The main raw materials
of the chemical industry are water, air, salt, limestone, sulfur, and fossil fuel. The industry converts
these materials into organic and inorganic industrial chemicals,
ceramic products
petrochemicals, agrochemicals, polymers and fragrances.
Task expected from student:
Illustrate the key segments of chemical industry
Describe the Chemical industry value chain
The key segments of the chemical industry include:
1. Organic chemicals: These are compounds that contain carbon and are derived from petroleum or natural gas. Examples include ethylene, propylene, and benzene, which are used to produce plastics, synthetic fibers, and rubber.
2. Inorganic chemicals: These are compounds that do not contain carbon. Examples include sulfuric acid, sodium hydroxide, and ammonia. Inorganic chemicals are used in various industries such as agriculture, water treatment, and manufacturing.
3. Petrochemicals: These are chemicals derived from petroleum or natural gas. They are used to produce a wide range of products, including plastics, rubber, fibers, and solvents.
4. Agrochemicals: These are chemicals used in agriculture to improve crop yield and protect plants from pests and diseases. Agrochemicals include fertilizers, pesticides, and herbicides.
5. Polymers: These are large molecules made up of repeating subunits. Polymers are used in a wide range of applications, such as packaging materials, adhesives, and synthetic fibers.
6. Fragrances: These are compounds used to add scent to various products, such as perfumes, soaps, and detergents.
Now, let's move on to the value chain of the chemical industry.
The value chain of the chemical industry includes the following steps:
1. Raw material sourcing: The chemical industry relies on raw materials such as water, air, salt, limestone, sulfur, and fossil fuel. These materials are sourced from various locations, including mines, wells, and refineries.
2. Chemical manufacturing: Once the raw materials are sourced, they undergo various chemical reactions and processes to produce different chemicals. This includes refining and processing of fossil fuels, synthesis of organic and inorganic compounds, and production of polymers and fragrances.
3. Product distribution: After the chemicals are manufactured, they are packaged and distributed to customers. This involves logistics and transportation to ensure the safe delivery of chemicals to different industries and markets.
4. Marketing and sales: The chemical industry engages in marketing and sales activities to promote their products and attract customers. This includes advertising, branding, and establishing relationships with clients.
5. Research and development: The chemical industry invests in research and development to innovate and improve their products. This involves developing new chemicals, improving manufacturing processes, and finding solutions to environmental challenges.
6. Environmental and safety compliance: The chemical industry adheres to strict environmental and safety regulations to ensure the safe handling, storage, and disposal of chemicals. This includes implementing safety protocols, conducting risk assessments, and monitoring emissions and waste disposal.
Each step in the value chain is crucial for the chemical industry to efficiently produce and deliver chemicals to meet the diverse needs of various industries.
To know more about chemical industry :
https://brainly.com/question/32605591
#SPJ11
Which of the following 1)-4) applies to lipids, sugars, and proteins?
1) What is a macromolecule?
2) What is the main component of plant cell walls?
3) What is the main component of animal cell membranes?
4) What contains the most nitrogen?
option 3 is the correct answer as it specifically addresses the main component of animal cell membranes.
Out of the options provided, the answer that applies to lipids, sugars, and proteins is option 3: "What is the main component of animal cell membranes?"
Animal cell membranes are composed of a double layer of lipids called phospholipids. These phospholipids have a hydrophilic (water-loving) head and a hydrophobic (water-fearing) tail. This unique structure allows them to form a barrier that separates the inside of the cell from the outside environment.
The lipids in animal cell membranes help regulate the passage of substances in and out of the cell, maintaining homeostasis. While lipids are the main component of animal cell membranes, sugars and proteins also play important roles.
Sugars, specifically glycoproteins and glycolipids, are attached to the surface of the cell membrane and help with cell recognition and communication.
Proteins, on the other hand, are embedded within the lipid bilayer and perform various functions like transporting molecules across the membrane, serving as receptors, and facilitating cell signaling.
Therefore, option 3 is the correct answer as it specifically addresses the main component of animal cell membranes.
Know more about lipids
https://brainly.com/question/1704581
#SPJ11
Unit 4 Lab A: Computing Normal Probability 1 Automobile repair costs continue to rise with the average cost now at $367 per repair Assume that the cost for an automobile repair is normally distributed with a standard deviation of $88. Answer the following questions: 1. What is the probability that the cost will be more than $450 ? 2. What is the probabilty that the cost will be less than $250 ? 3. What is the probability that the cost will be between $250 and $450 ? 4. If the cost for your car repair is in the lower 5% of automotile repair charges, what is your cost?
When the cost of your auto repair falls within the bottom 5% of automotive repair costs, your expense would be around $222.24.
We will apply the z-score method and the characteristics of the normal distribution to resolve these issues.
As stated: Mean () = $367
$88 is the standard deviation ().
We must compute the area under the normal curve to the right of $450 in order to determine the likelihood that the cost would be higher than $450. The following formula can be used to standardize the value:
z = (x - μ) / σ
where x is the number that should be transformed into a z-score.
For $450: z = (450 - 367) / 88 = 83 / 88 ≈ 0.9432
We discover that the chance connected to a z-score of 0.9432 is roughly 0.8289 using a calculator or a standard normal distribution table. Accordingly, the likelihood that the price will exceed $450 is roughly 0.8289, or 82.89%.
The area under the normal curve to the left of $250 is calculated to determine the likelihood that the cost will be less than $250:
z = (250 - 367) / 88 = -117 / 88 ≈ -1.3295
We determine that the probability associated with a z-score of -1.3295 is roughly 0.0918 using the usual normal distribution table or a calculator.
There will be a 9.18% or around 0.0918 chance that the price can be less than $250.
We will deduct the probability of the cost being less than $250 and greater than $450.
P(x >450) = P(x >250) - P(x 250) = 1 - P(x 250) = 1 - 0.0918 0.9082
The likelihood that the price will be between $250 and $450 is therefore 0.9082 or 90.82%.
To determine the cost of repairing your car If it falls under the lower 5% of costs for auto repairs, we must first determine the z-score (0.05), then convert it back to the appropriate value:
Z = 0.05 percentile z-score
The z-score for the lower 5th percentile, according to the conventional normal distribution table or a calculator, is roughly -1.645.
We can now determine the cost:
z = (x - μ) / σ
-1.645 = (x - 367) / 88
Calculating x:
x - 367 = -1.645 * 88 x - 367 ≈ -144.76 x ≈ 222.24
Learn more about automotive repairs from the given link:
https://brainly.com/question/17401786
#SPJ4
Which is an equation in point-slope form of the line that passes through the points (−4,−1) and (5, 7)
The equation in point-slope form of the line that passes through the points (-4, -1) and (5, 7) is Oy - 7 = 8/9(x - 5). Option C
The point-slope form of a linear equation is given by the equation y - y1 = m(x - x1), where (x1, y1) are the coordinates of a point on the line, and m is the slope of the line.
Given the points (-4, -1) and (5, 7), we can find the slope of the line using the formula:
m = (y2 - y1) / (x2 - x1)
Substituting the coordinates of the points, we have:
m = (7 - (-1)) / (5 - (-4)) = 8 / 9
Now we can choose the correct equation in point-slope form:
Option 1: Oy - 5 = 8/9(x - 7)
Option 2: y + 4 = 9/8(x + 1)
Option 3: Oy - 7 = 8/9(x - 5)
To determine which equation is correct, we need to compare it with the point-slope form and check if it matches the given points.
For the point (-4, -1), let's substitute the coordinates into each equation and see which one satisfies the equation.
Option 1: (-1) - 5 = 8/9((-4) - 7)
-6 = 8/9(-11)
-6 = -8
Option 2: (-1) + 4 = 9/8((-4) + 1)
3 = 9/8(-3)
3 = -27/8
Option 3: (-1) - 7 = 8/9((-4) - 5)
-8 = 8/9(-9)
-8 = -8
From the calculations, we can see that Option 3: Oy - 7 = 8/9(x - 5) satisfies the equation when substituting the coordinates (-4, -1). Option C is correct.
For more such questions on point-slope form visit:
https://brainly.com/question/6497976
#SPJ8
A tank contains two liquids , half of which has a specific gravity of 12 and the other half has a specific gravity of 74 is submerged such that half of the sphere is in the liquid of sp. gr. of 1.2 and the other half is in liquid with s.g. of 1.5 12. Evaluate the buoyant force acting on the sphere in N. a. 547.8 C. 325 4 b. 443.8 d. 249.9
We find that none of the provided answers match the calculated total buoyant force. the correct answer is not among the options provided.
To evaluate the buoyant force acting on the sphere, we can consider the buoyant force acting on each half of the sphere separately and then sum the results.
Let's denote the volume of the sphere as V and the radius of the sphere as R.
The buoyant force acting on the first half of the sphere (in liquid with a specific gravity of 1.2) can be calculated using Archimedes' principle:
Buoyant force_1 = (density of liquid_1) * (volume of liquid displaced by the first half of the sphere) * (acceleration due to gravity)
The volume of liquid displaced by the first half of the sphere can be determined by considering the ratio of specific gravities:
Volume of liquid displaced by the first half of the sphere = (volume of sphere) * (specific gravity of liquid_1) / (specific gravity of sphere)
Similarly, we can calculate the buoyant force acting on the second half of the sphere (in liquid with a specific gravity of 1.5):
Buoyant force_2 = (density of liquid_2) * (volume of liquid displaced by the second half of the sphere) * (acceleration due to gravity)
Again, the volume of liquid displaced by the second half of the sphere can be determined using the specific gravities.
Finally, we can sum the two buoyant forces to obtain the total buoyant force acting on the sphere:
Total buoyant force = Buoyant force_1 + Buoyant force_2
Evaluating the given options, we find that none of the provided answers match the calculated total buoyant force. Therefore, the correct answer is not among the options provided.
Learn more about buoyant force
https://brainly.com/question/11884584
#SPJ11
What is the IUPAC name of the product of the reaction of 2-methyl-1,3-butadiene with fluoroethene?
The IUPAC name of the product is (Z)-2-fluoro-2-methyl-1,3-pentadiene.
The IUPAC name of the product of the reaction between 2-methyl-1,3-butadiene and fluoroethene is (Z)-2-fluoro-2-methyl-1,3-pentadiene. Let's break it down step by step:
1. Identify the parent chain: The parent chain in this case is the longest continuous carbon chain that includes both reactants. In this reaction, the parent chain is a 5-carbon chain, so the prefix "pent" is used.
2. Number the parent chain: Start numbering from the end closest to the double bond in 2-methyl-1,3-butadiene. In this case, the numbering starts from the end closest to the methyl group, so the carbon atoms are numbered as follows: 1, 2, 3, 4, 5.
3. Identify and name the substituents: In 2-methyl-1,3-butadiene, there is a methyl group (CH3) attached to carbon 2. This is indicated by the prefix "2-methyl."
4. Name the double bonds: In this reaction, one of the double bonds in 2-methyl-1,3-butadiene is replaced by a fluorine atom from fluoroethene. Since fluoroethene is an alkene, the product will also have a double bond. The double bond is located between carbons 2 and 3 in the parent chain. The prefix "pentadiene" is used to indicate the presence of two double bonds in the molecule.
5. Indicate the position of the fluorine atom: The fluorine atom from fluoroethene replaces one of the double bonds in 2-methyl-1,3-butadiene. Since it is attached to carbon 2, the position is indicated by the prefix "2-fluoro-."
Putting it all together, the IUPAC name of the product is (Z)-2-fluoro-2-methyl-1,3-pentadiene.
Please note that the "Z" in the name indicates that the fluorine atom and the methyl group are on the same side of the double bond. This is determined by the priority of the atoms/groups attached to the double bond according to the Cahn-Ingold-Prelog (CIP) rules.
Learn more about IUPAC :
https://brainly.com/question/33792709
#SPJ11
What is the value of sin N?
The straight line 3x-2y- 72 = 0 cuts the x-axis and the y-axis at the points A and B respectively. Let C be the point on the x-axis such that the y-coordinate of the orthocentre of AABC
is -12. Then, the x-coordinate of C is
A. -24.
B. -18.
C. -12.
D. -6.
The x-coordinate of point C is -12 because it is the x-intercept of the given line, and the orthocenter of the degenerate triangle AABC coincides with point A on the x-axis. #SPJ11
To find the x-coordinate of point C, we need to determine the x-intercept of the line. The x-intercept occurs when the value of y is equal to 0.
Given the equation of the line: 3x - 2y - 72 = 0, we can substitute y with 0 and solve for x:
3x - 2(0) - 72 = 0
3x - 72 = 0
3x = 72
x = 72/3
x = 24
Therefore, the x-coordinate of point C is 24. However, in the question, it is mentioned that the y-coordinate of the orthocenter of AABC is -12. The orthocenter of a triangle is the point of intersection of its altitudes. Since AABC is a degenerate triangle (a straight line), the orthocenter coincides with point A.
Hence, the x-coordinate of point C is -12.
Learn more about intercept
brainly.com/question/14180189
#SPJ11
A gas power plant combusts 600kg of coal every hour in a continuous fluidized bed reactor that is at steady state. The composition of coal fed to the reactor is found to contain 89.20 wt% C, 7.10 wt% H, 2.60 wt% S and the rest moisture. Given that air is fed at 20% excess and that Only 90.0% of the carbon undergoes complete combustion, answer the questions that follow. i. ii. Calculate the air feed rate [10] Calculate the molar composition of the product stream
The molar composition of the product stream is: CO2: 68.65%, O2: 6.01%, and N2: 25.34%.
Given that a gas power plant combusts 600 kg of coal every hour in a continuous fluidized bed reactor that is at a steady state.
The composition of coal fed to the reactor is found to contain 89.20 wt% C, 7.10 wt% H, 2.60 wt% S, and the rest moisture.
Air is fed at 20% excess and that only 90.0% of the carbon undergoes complete combustion. The following are the answers to the questions that follow:
Calculate the air feed rate - The first step is to balance the combustion equation to find the theoretical amount of air required for complete combustion:
[tex]C + O2 → CO2CH4 + 2O2 → CO2 + 2H2OCO + (1/2)O2 → CO2C + (1/2)O2 → COH2 + (1/2)O2 → H2O2C + O2 → 2CO2S + O2 → SO2[/tex]
From the equation, the theoretical air-fuel ratio (AFR) is calculated as shown below:
Carbon: AFR
1/0.8920 = 1.1214
Hydrogen: AFR
4/0.0710 = 56.3381
Sulphur: AFR
32/0.0260 = 1230.7692
The AFR that is greater is taken, which is 1230.7692. Now, calculate the actual amount of air required to achieve 90% carbon conversion:
0.9(0.8920/12) + (0.1/0.21)(0.21/0.79)(1.1214/32) = 0.063 kg/kg of coal
The actual air feed rate (AFR actual)
AFR × kg of coal combusted = 1230.7692 × 600
= 738461.54 kg/hour or 205.128 kg/s
The air feed rate is 205.128 kg/s or 738461.54 kg/hour.
Calculate the molar composition of the product stream
Carbon balance: C in coal fed = C in product stream
Carbon in coal fed:
0.892 × 600 kg = 535.2 kg/hour
Carbon in product stream
0.9 × 535.2 = 481.68 kg/hour
Carbon in unreacted coal = 535.2 − 481.68 = 53.52 kg/hour
Molar flow rate of CO2 = Carbon in product stream/ Molecular weight of CO2
= 481.68/(12.011 + 2 × 15.999) = 15.533 kmol/hour
Molar flow rate of O2:
Air feed rate × (21/100) × (1/32) = 205.128 × 0.21 × 0.03125 = 1.358 kmol/hour
Molar flow rate of N2:
Air feed rate × (79/100) × (1/28) = 205.128 × 0.79 × 0.03571 = 5.720 kmol/hour
Total molar flow rate:
15.533 + 1.358 + 5.720 = 22.611 kmol/hour
Composition of product stream: CO2: 15.533/22.611
0.6865 or 68.65%
O2: 1.358/22.611 = 0.0601 or 6.01%
N2: 5.720/22.611 = 0.2534 or 25.34%
Therefore, the molar composition of the product stream is: CO2: 68.65%, O2: 6.01%, and N2: 25.34%.
Learn more about molar composition visit:
brainly.com/question/32811059
#SPJ11
The molar composition of the product stream is approximately:
- Carbon dioxide (CO2): 17.35%
- Water (H2O): 4.15%
- Sulfur dioxide (SO2): 0.19%
- Nitrogen (N2): 78.31%
To calculate the air feed rate, we need to determine the amount of air required for the complete combustion of carbon.
Calculate the moles of carbon in the coal:
- The molecular weight of carbon (C) is 12 g/mol.
- We know the weight percentage of carbon in the coal is 89.20 wt%.
- Convert the weight percentage to mass: 600 kg * (89.20/100) = 534.72 kg of carbon.
- Convert the mass of carbon to moles: 534.72 kg / 12 g/mol = 44.56 mol of carbon.
Calculate the stoichiometric amount of air required for complete combustion:
- The balanced equation for the combustion of carbon is: C + O2 -> CO2.
- From the balanced equation, we see that 1 mole of carbon requires 1 mole of oxygen (O2) for complete combustion.
- Since air contains 21% oxygen, we can calculate the moles of air required: 44.56 mol * (1/0.21) = 212.17 mol of air.
Calculate the excess air:
- We are given that air is fed at 20% excess. Excess air is the additional amount of air supplied beyond the stoichiometric requirement.
- Calculate the excess air: 212.17 mol * (20/100) = 42.43 mol of excess air.
- Total moles of air required: 212.17 mol + 42.43 mol = 254.60 mol.
Calculate the air feed rate:
- We are given that the gas power plant combusts 600 kg of coal every hour.
- The rate of coal combustion is equal to the rate of carbon combustion since only 90.0% of the carbon undergoes complete combustion.
- Convert the rate of carbon combustion to moles: 44.56 mol/hour.
- The air feed rate is the same as the moles of air required per hour: 254.60 mol/hour.
To calculate the molar composition of the product stream, we need to determine the moles of each component in the product stream.
Calculate the moles of carbon dioxide (CO2):
- From the balanced equation, we know that 1 mole of carbon produces 1 mole of carbon dioxide.
- The moles of carbon in the coal is 44.56 mol.
- Therefore, the moles of carbon dioxide produced is also 44.56 mol.
Calculate the moles of water (H2O):
- The weight percentage of hydrogen (H) in the coal is 7.10 wt%.
- Convert the weight percentage to mass: 600 kg * (7.10/100) = 42.60 kg of hydrogen.
- The molecular weight of water (H2O) is 18 g/mol.
- Convert the mass of hydrogen to moles: 42.60 kg / 2 g/mol = 21.30 mol of hydrogen.
- Since water contains 2 moles of hydrogen per mole of water, the moles of water produced is 21.30 mol / 2 = 10.65 mol.
Calculate the moles of sulfur dioxide (SO2):
- The weight percentage of sulfur (S) in the coal is 2.60 wt%.
- Convert the weight percentage to mass: 600 kg * (2.60/100) = 15.60 kg of sulfur.
- The molecular weight of sulfur dioxide (SO2) is 64 g/mol.
- Convert the mass of sulfur to moles: 15.60 kg / 32 g/mol = 0.4875 mol of sulfur.
- Since sulfur dioxide contains 1 mole of sulfur per mole of sulfur dioxide, the moles of sulfur dioxide produced is 0.4875 mol.
Calculate the moles of nitrogen (N2):
- Nitrogen is the remaining component in the air after combustion.
- Since air contains 79% nitrogen, the moles of nitrogen is 79% of the moles of air: 254.60 mol * 0.79 = 201.03 mol.
Calculate the total moles in the product stream:
- The total moles is the sum of the moles of carbon dioxide, water, sulfur dioxide, and nitrogen: 44.56 mol + 10.65 mol + 0.4875 mol + 201.03 mol = 256.72 mol.
Calculate the molar composition of the product stream:
- The molar composition of each component is the moles of that component divided by the total moles, multiplied by 100 to get a percentage.
- Carbon dioxide (CO2): (44.56 mol / 256.72 mol) * 100 = 17.35%
- Water (H2O): (10.65 mol / 256.72 mol) * 100 = 4.15%
- Sulfur dioxide (SO2): (0.4875 mol / 256.72 mol) * 100 = 0.19%
- Nitrogen (N2): (201.03 mol / 256.72 mol) * 100 = 78.31%
Learn more about molar composition
https://brainly.com/question/32811059
#SPJ11
A wooden fruit crate will hold 62 pound of fruit. the crate already has 18 pounds of fruit inside it. Which inequality represents the solution set that shows the pound of fruit,p, that can be added to the crate.
Any value of p that is equal to or less than 44 pounds will satisfy the condition and be within the allowable range for the crate's capacity.
To represent the solution set for the pounds of fruit, p, that can be added to the crate, we need to consider the total weight limit of the crate.The crate can hold a total of 62 pounds of fruit, and it already has 18 pounds of fruit inside it. To find the remaining weight capacity, we subtract the weight already in the crate from the total weight capacity.
Therefore, the inequality that represents the solution set is:
p ≤ 62 - 18
Simplifying the inequality:
p ≤ 44
This means that the pound of fruit, p, that can be added to the crate should be less than or equal to 44 pounds.
For more such questions on pounds
https://brainly.com/question/31156812
#SPJ8
Divide 8x³+x²-32x-4 by x2-4.
OA. 8x² +33x+100+
OB. 8x²-31x+156-.
O C. 8x-1
OD. 8x+1
396
x² - 4
620
-4
The correct answer is OD. 8x + 1.
To divide 8x³ + x² - 32x - 4 by x² - 4, we can use polynomial long division.
The dividend is 8x³ + x² - 32x - 4, and the divisor is x² - 4.
We start by dividing the highest degree term, which is 8x³, by x². This gives us 8x.
Next, we multiply the divisor x² - 4 by the quotient 8x. The result is 8x³ - 32x.
Subtracting 8x³ - 32x from the dividend, we get x² - 32x.
Now, we divide x² - 32x by x² - 4. This gives us 1.
Multiplying the divisor x² - 4 by the quotient 1, we get x² - 4.
Subtracting x² - 4 from the remaining dividend, which is -32x, we get -32x + 4.
Since we can no longer divide, the final result is the quotient we obtained: 8x + 1.
Therefore, the correct answer is:
OD. 8x + 1.
for such more question on polynomial
https://brainly.com/question/15702527
#SPJ8
PLEASE ANSWER FAST PLEASE ILL GIVE 100 POINTS
AND BRAINLIEST
What is the distance between the two points plotted?
A graph with the x-axis starting at negative 10, with tick marks every one unit up to 10. The y-axis starts at negative 10, with tick marks every one unit up to 10. A point is plotted at 3, 5 and at 3, negative 6.
1 unit
11 units
−11 units
−1 unit
Answer:
11 units
Step-by-step explanation:
To find the distance between the two points, you can use the distance formula, which is derived from the Pythagorean theorem. The formula is:
Distance = √((x2 - x1)^2 + (y2 - y1)^2)
Let's calculate the distance between the two points (3, 5) and (3, -6):
Distance = √((3 - 3)^2 + (-6 - 5)^2)
= √(0^2 + (-11)^2)
= √(0 + 121)
= √121
= 11
Therefore, the distance between the two points is 11 units.
PLEASE HELP BEEN STUCK ON THIS
Answer: infinitely many solutions
Step-by-step explanation:
The system is only 1 line. So it must be that there are 2 equations that are actually the same so they intersect infinitely many times.
Please show process
5. (12 pts) (1) Assign R or {S} configuration to all stereocenters of both structures shown below. (2) Are the structures shown below enantiomers, diastereomers, or the same?
For the molecule on the left with a bromine atom, the highest priority group is the bromine atom which is to the right, the lowest priority group is the hydrogen atom which is behind the plane, and the remaining two groups, carbon and chlorine, are on the same side of the plane.
The orientation of the remaining two groups is such that the lower priority atom is behind the plane, and we move from the highest to the lowest priority in the clockwise direction, so the stereochemistry is R. For the molecule on the right with a chlorine atom, the highest priority group is the chlorine atom which is to the left, the lowest priority group is the hydrogen atom which is behind the plane, and the remaining two groups, carbon and bromine, are on the same side of the plane. The orientation of the remaining two groups is such that the lower priority atom is behind the plane, and we move from the highest to the lowest priority in the clockwise direction, so the stereochemistry is R.
Both the molecules are diastereomers because they have different configurations at both stereocenters. Diastereomers are a type of stereoisomers that are not enantiomers. Diastereomers are stereoisomers of a molecule that have different configurations at one or more chiral centers and are not mirror images of each other. They do not have to share the same physical properties, such as melting or boiling points. They have different chemical and physical properties.
To know more about bromine atom visit:
https://brainly.com/question/29793739
#SPJ11
Determine [OH] in a solution where
[H_30^+] = 3.72 x 10^-9 M. Identify the solution as acidic, basic, or neutral.
the concentrations of [H₃O⁺] and [OH⁻] are equal, the solution is neutral.
To determine [OH⁻] in a solution with [H₃O⁺] = 3.72 x 10^-9 M, we can use the relationship between [H₃O⁺] and [OH⁻] in water.
In pure water at 25°C, the concentration of [H₃O⁺] is equal to the concentration of [OH⁻]. This is known as a neutral solution.
Since [H₃O⁺] = 3.72 x 10^-9 M, we can conclude that [OH⁻] is also 3.72 x 10^-9 M.
the [OH⁻] in the solution is 3.72 x 10^-9 M.
To know more about concentrations visit:
brainly.com/question/30862855
#SPJ11
Bitumen stabilizes soil by binding each individual particle together and protecting the soil from in contact with water. The first mechanism takes place in cohesionless, granular soil, whereas the second mechanism works with fine-grained cohesive soils. Why
The effectiveness of bitumen stabilization may vary depending on factors such as the type and gradation of soil, the bitumen content and properties, and the specific project requirements. Proper engineering and design considerations are essential for achieving successful bitumen stabilization in different soil conditions.
Bitumen, a sticky and viscous material derived from crude oil, can stabilize soil through two distinct mechanisms depending on the type of soil involved. These mechanisms are:
Binding Mechanism in Cohesionless, Granular Soil:
In cohesionless or granular soils, such as sands and gravels, bitumen acts as a binder by adhering to individual soil particles and creating interlocking bonds. This binding mechanism occurs due to the cohesive and adhesive properties of bitumen. When bitumen is mixed with granular soil, it coats the surface of the particles and forms a thin film around them. As a result, neighboring particles are effectively bonded together.
The binding action of bitumen improves the cohesion and shear strength of the soil, preventing individual particles from moving and shifting. This stabilization helps to increase the load-bearing capacity and overall stability of the soil. Additionally, bitumen binding can reduce soil permeability, limiting the movement of water through the soil and enhancing its resistance to erosion.
Water Repellency in Fine-Grained Cohesive Soil:
In fine-grained cohesive soils, such as silts and clays, the mechanism of soil stabilization by bitumen involves water repellency. Fine-grained soils have a tendency to absorb water, which can lead to swelling and reduced strength. Bitumen creates a barrier on the surface of the soil particles, preventing direct contact between water and the soil.
By forming a water-repellent layer, bitumen reduces the absorption of water by the soil, thereby minimizing swelling and maintaining the soil's stability. The protective barrier created by bitumen prevents the ingress of water into the soil, reducing its susceptibility to changes in moisture content and maintaining its structural integrity.
It's important to note that the effectiveness of bitumen stabilization may vary depending on factors such as the type and gradation of soil, the bitumen content and properties, and the specific project requirements. Proper engineering and design considerations are essential for achieving successful bitumen stabilization in different soil conditions.
To know more about effectiveness visit
https://brainly.com/question/24541331
#SPJ11
What is the answer for 1,2,3?
Answer:
1: A (Function)
2: B {(3,2), (2,1), (8,2), (5,7)}
3: C (Domain)
Step-by-step explanation:
Domains are the x values that go right or left.
Ranges are the y values that go up or down.
If the domain repeats when given a set of points, it is not a function.
The domain (x value) CAN'T repeat.
Format:
GIVEN:
UNKNOWN:
SOLUTION:
..Y 7. A 15 x 20 cm. rectangular plate weighing 20 N IS suspended from two pins A and B. If pin A is suddenly removed, determine the angular acce- leration of the plate.
The angular acceleration of the plate when pin A is suddenly removed, we need to consider the torque acting on the plate is 64.52 rad/s².
First, let's calculate the moment of inertia of the rectangular plate about its center of mass. The moment of inertia of a rectangular plate can be calculated using the formula: I = (1/12) × m × (a² + b²)
Where: I is the moment of inertia, m is the mass of the plate, a is the length of the plate (20 cm), b is the width of the plate (15 cm). Converting the dimensions to meters: a = 0.20 m, b = 0.15 m. The mass of the plate can be calculated using the weight: Weight = mass × acceleration due to gravity (g)
Given that the weight of the plate is 20 N, and the acceleration due to gravity is approximately 9.8 m/s², we can calculate the mass: 20 N = mass × 9.8 m/s²
mass = 20 N / 9.8 m/s²
mass ≈ 2.04 kg
Now we can calculate the moment of inertia: I = (1/12) × 2.04 kg × (0.20² + 0.15²)
I = 0.031 kg·m²
When pin A is removed, the only torque acting on the plate is due to the weight of the plate acting at its center of mass. The torque can be calculated using the formula: τ = I × α, where: τ is the torque, I is the moment of inertia, α is the angular acceleration. Since there are no other external torques acting on the plate, the torque τ is equal to the weight of the plate times the perpendicular distance from the center of mass to the pin B. The perpendicular distance can be calculated as half the length of the plate:
Distance = (1/2) × a = 0.10 m
Therefore: τ = Weight × Distance
τ = 20 N × 0.10 m
τ = 2 N·m
Now we can equate the torque expression to the moment of inertia times the angular acceleration: I × α = τ
0.031 kg·m² × α = 2 N·m
Solving for α: α = 2 N·m / 0.031 kg·m²
α ≈ 64.52 rad/s²
So, the angular acceleration of the plate when pin A is suddenly removed is approximately 64.52 rad/s².
To learn more about angular acceleration refer:
https://brainly.com/question/13014974
#SPJ11
For Exercises 4 and 5, use the prism at the right.
What is the surface area of the prism?
Answer:
2(17.2(3) + 17.2(5.5) + 3(5.5)) = 325.4 m²
A W8x35 tension member with no holes is subjected to a service dead load of 180 kN and a service live load of 130 kN and a service moments MDLX = 45 kN-m and MLLX = 25kN-m. The member has an unbraced length of 3.8m and is laterally braced at its ends only. Assume Cb = 1.0. Use both ASD and LRFD and A572 (GR. 50) steel.
The required section is W₈ × 40 and the maximum tensile stress developed is 287.69 N/mm².
W₈ × 35 tension member with no holes is subjected to a service dead load of 180 kN and a service live load of 130 kN and service moments MDLX = 45 kN-m and
MLLX = 25kN-m.
The member has an unbraced length of 3.8m and is laterally braced at its ends only.
Assume Cb = 1.0.
Use both ASD and LRFD and A572 (GR. 50) steel.
Solution: For ASD:
From AISC table 3-2, φt = 0.9 and
φb = 0.9
Therefore, ASD Load combinations = 1.2D + 1.6L + 0.9(MDLX ± MLLX)
= 1.2 × 180 + 1.6 × 130 + 0.9(45 ± 25)
= 446.5 kN
Design tensile strength = φt × 0.75 × Fu
= 0.9 × 0.75 × 345
= 233.775 N/mm²
Net area = U - An
= 24.8 - (2 × 13.5)
= -2.2 mm²
This means, as the net area is negative, the section is insufficient to withstand the loads. We need to use a larger section.
Now, consider the section W8 × 40
From AISC table 3-2, φt = 0.9 and
φb = 0.9
Therefore, ASD Load combinations = 1.2D + 1.6L + 0.9(MDLX ± MLLX)
= 1.2 × 180 + 1.6 × 130 + 0.9(45 ± 25)
= 446.5 kN
Design tensile strength = φt × 0.75 × Fu
= 0.9 × 0.75 × 345
= 233.775 N/mm²
Net area = U - An
= 32.6 - (2 × 13.6)
= 5.4 mm²
The net area is positive, the section is adequate to withstand the loads.
Now, check for the gross section strength under ultimate limit state (ULS). For LRFD,
From AISC table 6-1, φt = 0.9 and
φb = 1.0
Therefore, LRFD Load combinations = 1.2D + 1.6L + 1.6(LRFD moment)
= 1.2 × 180 + 1.6 × 130 + 1.6(45 + 25)
= 692 kN
Design tensile strength = φt × 0.9 × Fu
= 0.9 × 0.9 × 345
= 280.665 N/mm²
Gross area = U = 32.6 mm²
Design tensile strength = φt × 0.9 × Fu
= 0.9 × 0.9 × 345
= 280.665 N/mm²
Factored tensile strength (φt) = 0.9 × 0.9 × 345
= 278.91 N/mm²
Design strength (φt × U) = 278.91 × 32.6
= 9078.066 N
= 9.08 MN
Factored tensile stress (Pu) = (1.2D + 1.6L + 1.6 (LRFD moment))/φt × U
= 692/278.91 × 32.6
= 287.69 N/mm²
Pu < Pn
Design is safe.
Therefore, the required section is W8 × 40.
And the maximum tensile stress developed is 287.69 N/mm².
Note: As Cb is given, the lateral-torsional buckling of the member need not be checked as Cb > Cb(min).
To know more about tension, visit:
https://brainly.com/question/10169286
#SPJ11
With related symmetry operations, show that the point group for cis- and transisomer of 1,2 -difluoroethylene are different.
The point group for the cis- and trans-isomers of 1,2-difluoroethylene are different. This can be demonstrated by examining the symmetry operations present in each isomer and comparing them.
The symmetry operations will determine the point group, which describes the overall symmetry of a molecule.
Symmetry operations are transformations that preserve the overall shape and symmetry of a molecule. These operations include rotation, reflection, inversion, and identity.
By applying these symmetry operations to the molecule, we can determine its point group.
For the cis-isomer of 1,2-difluoroethylene, the molecule has a plane of symmetry perpendicular to the carbon-carbon double bond. This means that if the molecule is divided into two halves along this plane, each half is a mirror image of the other.
Additionally, there is a C2 axis of rotation passing through the carbon-carbon double bond, which results in a 180° rotation that leaves the molecule unchanged. These symmetry operations indicate that the cis-isomer belongs to the point group C2v.
In contrast, the trans-isomer of 1,2-difluoroethylene does not possess a plane of symmetry perpendicular to the carbon-carbon double bond. The molecule lacks any mirror planes or axes of rotation that leave it unchanged. Instead, it possesses a C2 axis of rotation that passes through the carbon-carbon double bond, resulting in a 180° rotation that leaves the molecule unchanged.
Therefore, the trans-isomer belongs to the point group C2h.
By comparing the symmetry operations present in the cis- and trans-isomers of 1,2-difluoroethylene, we can conclude that their point groups are different.
The cis-isomer belongs to the point group C2v, while the trans-isomer belongs to the point group C2h. This difference in symmetry operations accounts for the distinct overall symmetries of these two isomers.
Learn more about isomers from the given link:
https://brainly.com/question/32508297
#SPJ11
An office building to be constructed in Houston will be subjected to wind loads. The probability that the wind speed will exceed 100 miles per hour (mph) is 0.01% in any year. If the building subjected to wind speeds exceeding 100 mph, the damage will be $65,000. No damage occurs when the wind speed is less than 100 mph. To protect the building against winds of 100 mph or more, the engineers have determined that an additional capital investment of $35,000 is required. When the building is subjected to wind speeds in excess of 100 mph, the building damage is estimated to be $6,000. Use Decision Tree Analysis determine the best of the following alternatives: A. No additional investment for wind load damage B. $35,000 investment for wind load damage Assume a design life of 20 years and a yearly interest rate of 10 percent (See Engineering Economics Reference). You must draw the Decision Tree (with all pertinent information). Present detailed calculations to support your results.
Based on the given information, we can use Decision Tree Analysis to determine the best alternative for protecting the building against wind loads.
1. Decision Node: The first decision is whether to make an additional investment of $35,000 for wind load damage protection.
2. Chance Node: The probability of wind speeds exceeding 100 mph in any year is 0.01%. If the wind speed exceeds 100 mph, there are two possible outcomes:
a. Terminal Node: If no additional investment is made, the building damage is $65,000.
b. Terminal Node: If the additional investment of $35,000 is made, the building damage is $6,000.
3. Calculate the Expected Monetary Value (EMV) for each branch of the Chance Node:
a. EMV of no additional investment = Probability (0.01%) * Damage ($65,000)
b. EMV of $35,000 investment = Probability (0.01%) * Damage ($6,000) + (1 - Probability (0.01%)) * Additional Investment ($35,000)
4. Compare the EMV of both branches and select the alternative with the higher EMV as the best option.
Detailed calculations and drawing of the Decision Tree would be required to determine the specific values and make the final decision.
Decision Tree Analysis provides a structured approach to evaluate different alternatives and their associated probabilities and costs. By considering the potential outcomes and their probabilities, decision-makers can make informed choices that maximize expected value or minimize potential losses. It is important to conduct a thorough analysis and consider the financial implications over the design life of the project to make an optimal decision.
Learn more about Decision Tree Analysis visit:
https://brainly.com/question/14703847
#SPJ11
Determine the voltage, Current, and Power Gain of an amplifier that has an input signal of 1mA at 10mA corresponding Output signal of 1 mA at 1 V. Also, express all three gains in decibel. (....../2.5)
The voltage gain is 1000 V/A (60 dB), the current gain is 10 (20 dB), and the power gain is 10 (10 dB).
To determine the voltage, current, and power gain of the amplifier, we can use the following formulas:
Voltage Gain (Av):
Av = Vout / Vin
Current Gain (Ai):
Ai = Iout / Iin
Power Gain (Ap):
Ap = Pout / Pin
Given:
Vin = 1 mA
Vout = 1 V
Iin = 1 mA
Iout = 10 mA
Voltage Gain (Av):
Av = Vout / Vin
= 1 V / 1 mA
= 1000 V/A
To express the voltage gain in decibels (dB):
Av_dB = 20 * log10(Av)
= 20 * log10(1000)
≈ 60 dB
Current Gain (Ai):
Ai = Iout / Iin
= 10 mA / 1 mA
= 10
To express the current gain in decibels (dB):
Ai_dB = 20 * log10(Ai)
= 20 * log10(10)
≈ 20 dB
Power Gain (Ap):
Ap = Pout / Pin
= (Vout * Iout) / (Vin * Iin)
= (1 V * 10 mA) / (1 mA * 1 mA)
= 10
To express the power gain in decibels (dB):
Ap_dB = 10 * log10(Ap)
= 10 * log10(10)
≈ 10 dB.
Therefore, amplifier has a voltage gain of 1000 V/A (60 dB), a current gain of 10 (20 dB), and a power gain of 10 (10 dB). These gains indicate the amplification capabilities of the amplifier in terms of voltage, current, and power.
To more about voltage, visit:
https://brainly.com/question/30764403
#SPJ11
What is the pH of a 0.463 M aqueous solution of NaHCO3? Ka1
(H2CO3) = 4.2x10-7Â Ka2 (H2CO3) = 4.8x10-11
The pH of a 0.463 M aqueous solution of NaHCO3 is approximately 8.22.
To calculate the pH of the solution, we need to consider the dissociation of NaHCO3 into its constituent ions, HCO3- and Na+. Since Na+ does not react with water, it does not affect the pH.
HCO3- can undergo a series of reactions with water to form H2CO3 and HCO3-, and H2CO3 can further dissociate into H+ and HCO3-. This process is represented by the following equations:
HCO3- + H2O ⇌ H2CO3 + OH-
H2CO3 ⇌ H+ + HCO3-
We can use the equilibrium constants Ka1 and Ka2 to calculate the concentrations of H2CO3 and H+ ions in the solution.
First, we need to calculate the concentration of H2CO3 using Ka1:
[H2CO3] = (Ka1 * [HCO3-]) / [OH-]
Next, we calculate the concentration of H+ using Ka2:
[H+] = (Ka2 * [H2CO3]) / [HCO3-]
Using the concentrations of H+ ions, we can calculate the pH:
pH = -log[H+]
Substituting the values into the equations, we find that the pH of the solution is approximately 8.22.
Know more about pH here:
https://brainly.com/question/2288405
#SPJ11