For problems 5-10, determine what type of symmetry each figure has. If the figure has line symmetry, determine how many lines of symmetry the figure has. If the figure has rotational symmetry, determine the angle of rotational symmetry and if the figure also has point symmetry. (A figure can have both line and rotational symmetries or neither of these symmetries).
Answers
According to the information we can infer that figure 5 has a vertical line of symmetry in the middle, figure 9 has no line of symmetry and figure 10 has a horizontal and vertical line of symmetry in the middle.
How to identify the lines of symmetry of the figures?Symmetry is a term that refers to the correspondence of position, shape and size, with respect to a point, a line or a plane, of the elements of a set. In this case, the figures that have symmetry are those that have two equal shapes having a line as a reference.
So, we can say that figures 5 and 10 have lines of symmetry because if we divide them in half with a straight line, both sides will be equal. In this case, figure 5 can only be divided in half vertically so that its two sides are equal while figure 10 can be divided horizontally and vertically in half and its parts will be equal.
Learn more about symmetry in: https://brainly.com/question/1597409
#SPJ1
Related Questions
What is a saturated vapor pressure of ethanol
(C2H5OH) at 28°C if its boiling point is 78°C
and ΔHvap is 38.6 kJ/mol?
A.9atm
B.0.111atm
C.0.909atm
D.1.11atm
Answers
The given temperature of ethanol is 28 °C, and its boiling point is 78 °C. Thus, the temperature given is less than its boiling point, which means that the ethanol is in the liquid state, not in the gaseous state. The answer is option B. 0.111atm.
This means that the vapor pressure is the saturated vapor pressure of ethanol at 28 °C. The Clausius-Clapeyron equation is used to calculate the saturated vapor pressure. The equation is given as:
log P2/P1 = ΔHvap/R × (1/T1 - 1/T2)
where ΔHvap is the heat of vaporization, R is the gas constant, T1 is the boiling point of the liquid, T2 is the temperature for which the saturated vapor pressure is to be calculated, P1 is the vapor pressure at T1, and P2 is the vapor pressure at T2.The values are given as follows:
ΔHvap = 38.6 kJ/molR
= 8.314 J/mol.
KT1 = 78 °C + 273.15
= 351.15 K (boiling point of ethanol)
T2 = 28 °C + 273.15
= 301.15 K (temperature given)
P1 = atmospheric pressure (because the boiling point of ethanol is above the atmospheric pressure)P2 = ?log P2/atm atmospheric pressure/atm = 0.111atmapproximately.So, the answer is option B. 0.111atm.
For more information on ethanol visit:
brainly.com/question/29294678
#SPJ11
The decomposition: SO2Cl2 → SO2 + Cl2 in the gas phase is irreversible and 1st order. The specific speed and activation energy are given by k = 6.4x1015 S-1 at 25°C Ea = 51 kcal/mol a) The reaction is carried out in a tubular reactor, at a constant temperature of 400°C and under a pressure of 1 atm. Determine the residence time to achieve 90% conversion. b) The reaction is carried out in a mixing reactor at 400°C and 1 atm. Determine the time required to reach 90% decomposition Tradi
Answers
a) In a tubular reactor at 400°C and 1 atm, the residence time to achieve 90% conversion can be calculated using the first-order rate equation.
b) In a mixing reactor at the same conditions, the time required to reach 90% decomposition can be determined using the integrated rate law for a first-order reaction.
Explanation:
The given reaction is the decomposition of SO2Cl2 into SO2 and Cl2 in the gas phase. This reaction is irreversible and follows a first-order kinetics.
a) To determine the residence time required to achieve 90% conversion in a tubular reactor at a constant temperature of 400°C and under a pressure of 1 atm, we can use the first-order rate equation:
ln(C0/C) = kt
where C0 is the initial concentration, C is the concentration at a given time, k is the rate constant, and t is the time.
In this case, we need to find the time (t) when the conversion (C/C0) is 90%. Since the rate constant (k) is given, we can rearrange the equation as:
ln(1 - 0.9) = -kt
Substituting the given values, we have:
ln(0.1) = -6.4x10^15 S^-1 * t
Now we can solve for t:
t = ln(0.1) / (-6.4x10^15 S^-1)
b) To determine the time required to reach 90% decomposition in a mixing reactor at 400°C and 1 atm, we can use the same first-order rate equation:
ln(C0/C) = kt
However, in a mixing reactor, the concentration (C) will change with time. Therefore, we need to consider the integrated rate law for a first-order reaction:
t = 1 / k * ln(C0/C)
Since the reaction is irreversible, the concentration of SO2Cl2 will decrease as the reaction proceeds. The concentration of SO2 and Cl2 will increase.
To find the time (t) when the decomposition is 90%, we can use the integrated rate law and rearrange the equation as:
t = 1 / k * ln(C0/C)
Substituting the given values, we have:
t = 1 / (6.4x10^15 S^-1) * ln(1/0.1)
Now we can solve for t:
t = 1 / (6.4x10^15 S^-1) * ln(10)
To know more about reactor visit:
https://brainly.com/question/29123819
#SPJ11
p:X→Y be a continuous map with a right inverse (a right inverse is a continuous map f:Y→X such that p∘f is the identity map on Y ). Show that p is a quotient map. (b) Let A be a subspace of X. A retraction of X onto A is a continuous map r:X→A such that r(a)=a for all a∈A. Show that a retraction is a quotient map.
Answers
{y} has an open neighborhood V in Y that is contained in A. Since y ∈ A was arbitrary, A is open in Y.
We have to show that p is a quotient map.Let A be a subset of Y, and consider the subset [tex]p^(-1)(A)[/tex]of X. We want to show that A is open in Y if and only if[tex]p^(-1)(A)[/tex]is open in X.
We already know that if A is open in Y, then[tex]p^(-1)(A)[/tex]is open in X.
Conversely, let[tex]p^(-1)(A)[/tex] be open in X. We need to show that A is open in Y.Let y ∈ A. We need to find an open set V of Y containing y such that V ⊆ A.
Since p is continuous and f is continuous, p^(-1)({y}) is closed in X.
Let B =[tex]X \ p^(-1)({y})[/tex]. B is the complement of a closed set in X and therefore is open in X.
Since[tex]f(p^(-1)({y})) = {y}[/tex], it follows that f(B) is disjoint from {y}.
To know more about quotient visit:
https://brainly.com/question/16134410
#SPJ11
A) What is the name of the enzyme that is responsible for the production of water that is shown in the net reaction of glycolysis, and what is the reaction mechanism type catalyzed by the enzyme?
B)How many electrons are transferred from glyceraldehyde 3-phosphate to NAD+ in glycolysis.
Answers
The name of the enzyme that is responsible for the production of water that is shown in the net reaction of glycolysis is pyruvate kinase. The reaction mechanism type catalyzed by the enzyme is a substrate-level phosphorylation.
The number of electrons transferred from glyceraldehyde 3-phosphate to NAD+ in glycolysis is two electrons are transferred from glyceraldehyde phosphate to NAD+ in glycolysis.Glycolysis is the first stage in the breakdown of glucose, a process that occurs in almost all cells. It is an energy-producing metabolic pathway. Glucose molecules are split into two pyruvate molecules in glycolysis.
The energy produced by glycolysis is used in the second stage of cellular respiration, which is the citric acid cycle. The conversion of glyceraldehyde 3-phosphate to 1,3-bisphospho glycerate in glycolysis is a substrate-level phosphorylation. Substrate-level phosphorylation is a process in which ATP is formed by the direct transfer of a phosphate group from a phosphorylated substrate to ADP during glycolysis.
To know more about enzyme visit :
https://brainly.com/question/31385011
#SPJ11
Can I please have a step by step explanation for question B only, PLEASEEEE I only have today please pleaseee
Answers
a. Triangle RST is an acute triangle
b. Triangle DEF is an acute triangle
What is sine rule?Sine rule states that in a triangle, side “a” divided by the sine of angle A is equal to the side “b” divided by the sine of angle B is equal to the side “c” divided by the sine of angle C.
a. a/sinA = b/sinB
4.7/sin57 = 4/sinT
4.7 sinT = 4 sin57
sin T = 3.355/4.7
sinT = 0.714
T = 46° ( nearest degree)
angle S = 180-( 46+57)
= 180- 103
= 77°
Therefore triangle RST is an acute trangle.
b. sinE/80 = sin50/62
= 80 × 0.766 = 62sinE
61.28 = 62sinE
sinE = 61.28/62
sinE = 0.988
E = 81°
angle D = 180-(81+50)
= 180 - 131
= 49°
Therefore triangle DEF is an acute triangle
learn more about sine rule from
https://brainly.com/question/20839703
#SPJ1
The question below was asked in a grade 12 mathematics examination. in a revision session with your learners, you explain the meaning of each piece of information given to draw the graph. Write down your explanation.
A cubic functional f has the following properties.
f(1/2) = f(3)= f(-1) = 0
f^`(2) = f`(-1/3) = 0
Draw a possible sketch graph of f, clearly indicating the x-coordinates of the turning point and all the x-intercrpts
Answers
There will be a local minimum at x = 2 and a local maximum at x = -1/3, with the graph passing through the x-axis at (1/2,0), (3,0), and (-1,0).
The properties given above to draw a possible sketch graph of the cubic function f are as follows:
f(1/2) = f(3) = f(-1) = 0; this means that the x-intercepts of the graph are (1/2,0), (3,0), and (-1,0).
f^`(2) = f`(-1/3) = 0; this means that the turning points of the graph are at x = 2 and x = -1/3.
In order to determine the shape of the graph, we need to determine the sign of the leading coefficient of the cubic function f. Since there is no information given about the sign of the leading coefficient, we will assume that it is positive. If the leading coefficient is negative, the graph would be reflected about the x-axis.
The turning points are (2,0) and (-1/3,0). Since the leading coefficient is positive, the graph will be concave up between the two turning points, and concave down outside of those two points.
Therefore, there will be a local minimum at x = 2 and a local maximum at x = -1/3, with the graph passing through the x-axis at (1/2,0), (3,0), and (-1,0).
A possible sketch of the graph of f, with the x-coordinates of the turning point and all the x-intercepts clearly indicated, is shown below:
Thus, this is the explanation of drawing a possible sketch graph of f by explaining the meaning of each piece of information given to draw the graph.
To know more about cubic function, visit:
https://brainly.com/question/29337275
#SPJ11
Partial Question 1 An aqueous solution of hydrogen peroxide (H₂O₂) is 70.0% by mass and has a density of 1.28 g/mL. Calculate the a) mole fraction of H₂02, b) molality, and c) molarity. Report with correct units (none for mole fraction, m for molality, M for molarity) and sig figs. mole fraction of H₂O2: molality of H₂O2
Answers
The mole fraction of H₂O₂ is 0.454. The molality of H₂O₂ is 13.281 m. The molarity of H₂O₂ is 7.575 M.
a) To calculate the mole fraction of H₂O₂, we need to determine the moles of H₂O₂ and the total moles of the solution. The mass percent of H₂O₂ is given as 70.0%.
Assuming a 100 g solution, the mass of H₂O₂ is 70.0 g.
The molar mass of H₂O₂ is 34.02 g/mol.
Dividing the mass of H₂O₂ by its molar mass gives us the moles of H₂O₂, which is 2.058 mol.
The total moles of the solution is the sum of the moles of H₂O₂ and H₂O (since it is an aqueous solution).
Assuming a density of 1.28 g/mL, the mass of 100 g solution is 78.125 mL.
Subtracting the mass of H₂O₂ from the mass of the solution gives us the mass of H₂O, which is 8.125 g.
Dividing the mass of H₂O by its molar mass (18.02 g/mol) gives us the moles of H₂O, which is 0.451 mol.
The mole fraction of H₂O₂ is then calculated by dividing the moles of H₂O₂ by the total moles of the solution, which is 0.454.
b) To calculate the molality of H₂O₂, we need to determine the moles of H₂O₂ and the mass of the solvent (H₂O). The moles of H₂O₂ (2.058 mol) and the mass of H₂O (8.125 g) were calculated in part a).
The molality is calculated by dividing the moles of H₂O₂ by the mass of H₂O in kg.
Converting the mass of H₂O to kg (8.125 g = 0.008125 kg) and dividing it by the moles of H₂O₂ gives us the molality, which is 13.281 m.
c) To calculate the molarity of H₂O₂, we need to determine the moles of H₂O₂ and the volume of the solution. The moles of H₂O₂ (2.058 mol) were calculated in part a).
To determine the volume of the solution, we divide the mass of the solution (100 g) by its density (1.28 g/mL), giving us a volume of 78.125 mL.
Converting mL to L (78.125 mL = 0.078125 L) and dividing the moles of H₂O₂ by the volume of the solution gives us the molarity, which is 7.575 M.
Know more about mole fraction here:
https://brainly.com/question/30724931
#SPJ11
Implement the Boolean function AB+C with up to 4 NAND gates.
Answers
In this implementation, we used a total of 7 NAND gates (N1, N2, N3, N4, N5, N6, and N7).
To implement the Boolean function AB+C using up to 4 NAND gates, we can break it down into multiple steps. Each step involves using NAND gates to perform logical operations and combine the inputs in a specific way. Here's one possible implementation:
Step 1:
Create the NAND gates for the individual inputs and their negations:
- Create NAND gate N1 with inputs A and A (A NAND A).
- Create NAND gate N2 with inputs B and B (B NAND B).
- Create NAND gate N3 with inputs C and C (C NAND C).
Step 2:
Combine the inputs using NAND gates:
- Create NAND gate N4 with inputs A and B (A NAND B).
- Create NAND gate N5 with inputs N4 (output of N4) and N4 (output of N4 NAND N4). This is equivalent to inverting the output of N4.
- Create NAND gate N6 with inputs N5 (output of N5) and N5 (output of N5 NAND N5). This is equivalent to inverting the output of N5.
Step 3:
Combine the outputs of Step 2 with the C input:
- Create NAND gate N7 with inputs N6 (output of N6) and C.
- The output of N7 represents the desired function AB+C.
In this implementation, we used a total of 7 NAND gates (N1, N2, N3, N4, N5, N6, and N7).
To know more about function click-
http://brainly.com/question/25841119
#SPJ11
Assume the government is initially in budget balance. Does the government’s budget balance improve, deteriorate, or remain unchanged if the government cuts its spending in a recession, ceteris paribus? To answer this question, use the example in Figure 14.11b. Assume the budget was in balance at point A. Once at B, the government cuts G to improve its budget balance. Assume there are no unemployment benefits and a linear tax. (you can draw in pencil or pen on a piece of paper and take a picture to include in your word document.)
Answers
The government's budget balance improves if it cuts its spending in a recession, ceteris paribus.
When the government cuts its spending in a recession, it reduces its expenditures on goods, services, and investments. As a result, the government's total spending decreases, which leads to a decrease in the budget deficit or an increase in the budget surplus. This improvement in the budget balance occurs because the government is reducing its overall outlays and, therefore, its need to borrow or rely on other sources of funding.
By cutting spending, the government can reduce its fiscal deficit or even achieve a fiscal surplus. This reduction in the deficit or the creation of a surplus helps to alleviate the financial strain on the government. It allows the government to have more resources available to allocate towards other priorities, such as paying off existing debt or investing in productive sectors of the economy.
However, it is essential to consider the broader economic implications of spending cuts. While reducing spending can improve the government's budget balance, it can also have contractionary effects on the overall economy. Decreased government spending can lead to reduced aggregate demand, lower economic growth, and potential job losses, which may further exacerbate the recessionary conditions.
the impact of government spending cuts and their effects on the economy by examining the fiscal multiplier, which measures the overall impact of changes in government spending on economic output and employment.
Learn more about ceteris paribus.
brainly.com/question/30870594
#SPJ11
Let R be an uncountable subset of positive real numbers. Show the existence of a sequence (rn)neNX such that ΣnEN™n = [infinity]o. (Comment: One can use this assertion to construct a measurable space where no probability can be uncountably additive.)
Answers
Yes, it is possible to construct a sequence (rn)neNX such that the sum of the reciprocals of its terms diverges to infinity.
To demonstrate the existence of such a sequence, let's consider the uncountable subset R of positive real numbers. Since R is uncountable, we can enumerate its elements as {r1, r2, r3, ...}.
Now, construct the sequence (rn)neNX as follows: for each positive integer n, choose rn = 1/n² if n is in the set {r1, r2, r3, ...} and rn = 1/n otherwise.
By construction, every element of R appears in the sequence (rn)neNX, and the terms of the sequence converge to zero. Moreover, the sum of the reciprocals of the terms can be computed as ΣnEN™n = 1/1² + 1/2² + 1/3² + ... = π²/6, which is a well-known result in mathematics.
Since the sum of the reciprocals of the terms of the sequence is equal to a finite, non-zero value (π[tex]^2^/^6[/tex]), it diverges to infinity. This construction demonstrates the existence of a sequence with the desired properties.
Learn more about: reciprocals
brainly.com/question/33582378
#SPJ11
Compute flow rate and temperature downstream from a WTE plant: Flow rate and temperature measurements were made along a river upstream of a WTE plant. The river temperature was recorded as 18°C, and the flow rate was 20 m³/s. Cooling water from a WTE plant flows into the river at a rate of 4 m³/s and a temperature of 78°C. What is the flow rate in the river downstream of the WTE plant in m³/s? What is the river temperature downstream of the WTE plant in °C?
Answers
The river temperature downstream of the WTE plant is -1.5°C.
To calculate the flow rate and temperature downstream from the WTE (Waste-to-Energy) plant, we need to consider the flow rates and temperatures upstream and the cooling water from the WTE plant.
Let's start with the flow rate downstream of the WTE plant.
1. The total flow rate in the river upstream is 20 m³/s.
2. The cooling water from the WTE plant flows into the river at a rate of 4 m³/s.
3. To find the flow rate downstream, we subtract the cooling water flow rate from the total flow rate upstream.
- Flow rate downstream = Total flow rate upstream - Cooling water flow rate
- Flow rate downstream = 20 m³/s - 4 m³/s
- Flow rate downstream = 16 m³/s
So, the flow rate in the river downstream of the WTE plant is 16 m³/s.
Now, let's determine the temperature downstream of the WTE plant.
1. The river temperature upstream is recorded as 18°C.
2. The cooling water from the WTE plant has a temperature of 78°C.
3. When the cooling water mixes with the river water, it will cause the river temperature to rise.
4. We can use a mass balance equation to find the temperature downstream.
- Mass of the river water * Initial temperature of the river water = Mass of the cooling water * Initial temperature of the cooling water + Mass of the mixed water * Final temperature of the mixed water
- (Flow rate downstream * Initial temperature of the river water) = (Cooling water flow rate * Initial temperature of the cooling water) + (Total flow rate downstream * Final temperature of the mixed water)
- (16 m³/s * 18°C) = (4 m³/s * 78°C) + (16 m³/s * Final temperature of the mixed water)
- (288 m³°C/s) = (312 m³°C/s) + (16 m³/s * Final temperature of the mixed water)
- Final temperature of the mixed water = (288 m³°C/s - 312 m³°C/s) / 16 m³/s
- Final temperature of the mixed water = -24°C / 16 m³/s
- Final temperature of the mixed water = -1.5°C
The negative value indicates a decrease in temperature.
Therefore, River temperatures are -1.5°C downstream of the WTE facility.
learn more about temperature from given link
https://brainly.com/question/17508027
#SPJ11
PLEASE HELP !!!!!
3,120 fans attended the final game of the season. This was a 30% increase from the attendance at the first game of the season.
How many fans attended the first game of the season? Write and solve an equation to determine the number of fans who attended the first game of the season.
Answers
Answer:
2400
Step-by-step explanation:
According to the information provided, the attendance at the final game of the season was a 30% increase from the attendance at the first game. This means that the final game's attendance can be calculated by adding 30% of the attendance at the first game to the attendance at the first game.
The equation can be written as:
x + 0.3x = 3,120
Simplifying the equation:
1.3x = 3,120
To solve for "x," we divide both sides of the equation by 1.3:
x = 3,120 / 1.3
Calculating the result:
x ≈ 2,400
Therefore, approximately 2,400 fans attended the first game of the season.
A 26 mm diameter, solid circular shaft is made of a metal with a shear modulus, G = 16,174 MPa. The shaft is 1.3 m long. If a torque of 6 Nm is applied to one end of the shaft, what is the angle of rotation in the shaft in radians? Answer to 3 decimal places and assume the angle is in a positive direction.
Answers
The angle of rotation in the shaft, in the positive direction, is approximately 0.000149 radians
The angle of rotation in the shaft can be calculated using the formula: θ = T * L / (G * π * r^4)
where:
θ is the angle of rotation in radians,
T is the torque applied to one end of the shaft (6 Nm),
L is the length of the shaft (1.3 m),
G is the shear modulus of the metal (16,174 MPa), and
r is the radius of the shaft (half of the diameter, which is 26 mm / 2 = 13 mm = 0.013 m).
First, let's convert the units of the torque from Nm to Nmm since the shear modulus is given in MPa.
6 Nm * 1000 = 6000 Nmm
Now, let's calculate the radius: r = 0.013 m
Next, let's substitute the values into the formula: θ = (6000 Nmm) * (1.3 m) / (16174 MPa * π * (0.013 m)^4)
Calculating this expression gives: θ ≈ 0.000149 radians
Learn more about shear modulus:
https://brainly.com/question/14020225
#SPJ11
Apply Jacobi's method to the given system. Take the zero vector as the initial approximation and work with four-significant-digit accuracy until two successive iterates agree within 0. 001 in each variable. Compare your answer with the exact solution found using any direct method you like. (Round your answers to three decimal places. )
Answers
Once you provide the system of equations, we can proceed with the Jacobi's method as follows:
Write the system of equations in matrix form: Ax = b, where A is the coefficient matrix, x is the vector of unknowns, and b is the constant vector on the right-hand side. Decompose the coefficient matrix A into the sum of diagonal (D), lower triangular (L), and upper triangular (U) matrices: A = D - L - U.
Initialize the iteration by setting x^(0) as the zero vector. Iterate using the Jacobi method until the desired convergence criterion is met:
Calculate the next iterate using the formula: x^(k+1) = D^(-1)(b - (L + U)x^(k)).
Repeat this step until two successive iterates agree within the desired tolerance.
Compare the result obtained from Jacobi's method with the exact solution found using a direct method, such as Gaussian elimination or matrix inversion.
Please provide the system of equations so that I can assist you further with the calculations.
Learn more about Jacobi's here
https://brainly.com/question/30978173
#SPJ11
Dry ice is the name for solid carbon dioxide. Instead of melting, solid carbon dioxide sublimes according to the equation: CO2(s) + CO2(g) When dry ice is added to warm water, heat from the water causes the dry ice to sublime more quickly. The evaporating carbon dioxide produces a dense fog often used to create special effects. In simple dry ice fog machines, dry ice is added to warm water in a Styrofoam cooler. The dry ice produces fog until it evaporates away, or until the water gets too cold to sublime the dry ice quickly enough. A small Styrofoam cooler holds 15.0 L of water heated to 85 °C. Use standard enthalpies of formation to calculate the mass of dry ice that should be added to the water so that the dry ice completely sublimes away when the water reaches 25 °C. Assume no heat loss to the surroundings. (The AHºf for CO2(s) is -427.4 kJ/mol.)
Answers
The standard enthalpy of formation is the change in enthalpy when a substance is formed from its elements under standard conditions (at 25°C and 1 atm).
We'll need to use the following balanced chemical equation for the sublimation of dry ice: [tex]CO2(s) + Heat -- > CO2(g)[/tex]
At standard conditions, the enthalpy change for this reaction is equal to the enthalpy of sublimation for CO2(s).
We'll need to determine how much heat is released by the 15.0 L of 85 °C water when it cools down to 25 °C. Then we'll equate that heat loss with the heat that is required to sublime dry ice. Let's begin by calculating the heat lost by the water:
[tex]q = m*C*ΔT[/tex]
whereq = heat lost by the water m = mass of water C = specific heat of waterΔT = change in temperature of water=
[tex](15.0 kg)*(4.18 J/g·°C)*(85-25)°C= 4.74x10^4 J[/tex]
The heat required to sublime dry ice is
[tex]q = n*ΔHf[/tex]
where q = heat required for sublimation of dry ice n = number of moles of dry iceΔHf = enthalpy of formation for CO2(s)Since dry ice has the formula CO2, one mole of CO2 corresponds to one mole of dry ice. Therefore, we can find the number of moles of dry ice needed from the amount of water that we have:
[tex]m(H2O) = (15.0 L)*(1.00 kg/L) \\= 15.0 kg n(CO2) \\= m(H2O)/18.01528 g/mol \\= 832.9 molΔHf(CO2(s))\\ = -427.4 kJ/mol\\= -(427.4 kJ/mol)*(832.9 mol) \\= -3.56x10^5 J[/tex]
Finally, we can equate the heat loss by the water to the heat required to sublime the dry ice:
4.74x10^4 J = -3.56x10^5 J + n(ΔHf)
Solving for n gives n = 0.132 mol
This is the amount of dry ice needed to sublime completely when added to 15.0 L of 85 °C water. Let's convert it to grams:
mass(CO2(s)) = n*(molar mass)
= (0.132 mol)*(44.01 g/mol)
= 5.80 g
Therefore, the mass of dry ice that should be added to the water is 5.80 g.
The calculation of the mass of dry ice required to be added to the water which will completely sublime when the water reaches 25 degrees Celsius is found to be 5.80 grams.
To learn more about standard enthalpy visit:
brainly.com/question/30264187
#SPJ11
We are given that m∠AEB = 45° and ∠AEC is a right angle. The measure of ∠AEC is 90° by the definition of a right angle.
Answers
Yes, this statement is correct. According to the above statement, it enjoined that angle AEC is a right angle, Because of this it measures 90 levels. This is the definition of a right perspective.
Additionally, it's miles for the reason that m∠AEB is 45 degrees. Therefore, the perspective AEB measures 45 degrees based totally at the information furnished.
In summary:
m<AEB = 45°
m<AEC = 90°
A perfect gas expands isothermally at 300 K from 17.00 dm to 27.00 dm. Calculate the work (w) done for an expansion against a constant external pressure of 200000 Pa. Select one: 01. 10.00 kJ 2. +2.00 kJ O 3.-20.00 kJ 4.-2.00 KD 5. none of the other answers
Answers
The work done for the expansion against a constant external pressure of 200000 Pa is -200 kJ.
To calculate the work done (w) during an isothermal expansion of a perfect gas, we can use the formula:
w = -Pext * ΔV
where:
- w is the work done
- Pext is the external pressure
- ΔV is the change in volume
In this case, the gas expands isothermally, meaning the temperature remains constant at 300 K. The initial volume is 17.00 dm and the final volume is 27.00 dm. The external pressure is given as 200000 Pa.
To calculate the change in volume, we subtract the initial volume from the final volume:
ΔV = 27.00 dm - 17.00 dm
Now we can substitute the values into the formula:
w = -200000 Pa * (27.00 dm - 17.00 dm)
Simplifying the equation:
w = -200000 Pa * 10.00 dm
Since 1 J = 1 Pa * 1 m³, we can convert dm to m:
1 dm = 0.1 m
w = -200000 Pa * 10.00 dm
w = -200000 Pa * 1.00 m³
Now we can calculate the work:
w = -200000 Pa * 1.00 m³
w = -200000 J
Since the work is given in Joules (J), we can convert it to kilojoules (kJ):
1 kJ = 1000 J
w = -200000 J / 1000
w = -200 kJ
Therefore, the work done for the expansion against a constant external pressure of 200000 Pa is -200 kJ.
To know more about work done :
https://brainly.com/question/32263955
#SPJ11
]Express the following running times in big
O:
43n+ 52n2 + 14n
54n
66n2 + 61n
log(n) + 88n + 31n
(9n*(5n + 7)(8n+9)) / 50
29
46n log(n) + 52n
11n+ 44n2 + 33n
Answers
The running times of the given expressions can be expressed in big O notation as follows:
43n + 52n^2 + 14n: This expression has the highest degree term as n^2. Therefore, the running time can be expressed as O(n^2), indicating that the running time grows quadratically with the input size n.
54n: This expression has a linear relationship with the input size n. Hence, the running time can be expressed as O(n), indicating that the running time grows linearly with the input size.
66n^2 + 61n: Similar to the first expression, this expression has the highest degree term as n^2. Therefore, the running time can be expressed as O(n^2), indicating a quadratic growth rate.
log(n) + 88n + 31n: The logarithmic term log(n) has a slower growth rate compared to the linear terms 88n and 31n. Hence, the overall running time can be expressed as O(n), indicating a linear growth rate.
(9n*(5n + 7)(8n+9)) / 50: This expression involves multiple terms and factors. However, the highest degree term is n^3. Therefore, the running time can be expressed as O(n^3), indicating a cubic growth rate.
29: This expression represents a constant value. Regardless of the input size, the running time remains constant. Hence, it can be expressed as O(1).
46n log(n) + 52n: The presence of the logarithmic term log(n) indicates a slower growth rate compared to the n term. Therefore, the running time can be expressed as O(n log(n)), indicating a growth rate between linear and quadratic.
11n + 44n^2 + 33n: This expression has the highest degree term as n^2. Therefore, the running time can be expressed as O(n^2), indicating a quadratic growth rate.
In summary, the running times of the given expressions can be summarized as follows: two expressions have a quadratic growth rate (O(n^2)), two have a linear growth rate (O(n)), one has a cubic growth rate (O(n^3)), one is constant (O(1)), and two have a growth rate between linear and quadratic (O(n log(n))).
Learn more about logarithmic here:
https://brainly.com/question/30226560
#SPJ11
8. The statement that applies to the chemical reaction that occurs during photosynthesis is the .products have more potential energy than the reactants and the ∆H is negative .reactants have more potential energy than the products in this exothermic reaction .products have more potential energy than the reactants and the ∆H is positive .Dreactants have more potential energy than the products and the ∆H is positive
Answers
The statement that applies to the chemical reaction that occurs during photosynthesis is that the products have more potential energy than the reactants and the ∆H is positive.
Photosynthesis is the process used by plants, algae, and some bacteria to convert sunlight, water, and carbon dioxide into glucose (a sugar) and oxygen. The process takes place in the chloroplasts in plastids of plant cells.
Photosynthesis is carried on in two main stages: the light-dependent reactions and the light-independent reactions (also known as the Calvin cycle).
Light energy is absorbed by pigments such as chlorophyll in light dependent reactions. This energy is used to split water molecules into hydrogen ions (H+) and oxygen (O2). The hydrogen ions are then used to generate ATP (adenosine triphosphate), which is an energy-rich molecule and does not directly produce glucose.
In the light-independent reactions (Calvin cycle), ATP and the hydrogen ions produced in the previous stage are used to convert carbon dioxide (CO2) into glucose. This process requires energy, so the products (glucose) have more potential energy than the reactants (carbon dioxide).
The change in energy (∆H) is positive during photosynthesis because energy is being absorbed from the surroundings to drive the reaction. This energy is stored in the chemical bonds of glucose.
During photosynthesis, the products (glucose) have more potential energy than the reactants (carbon dioxide), and the ∆H is positive.
Let us know more about chemical reaction :
https://brainly.com/question/29762834.
#SPJ11
Explain how waste-to-energy incineration for MSW treatment emits anthropogenic GHG and formulate the calculation for its CO2-e emission factor
Answers
The CO2-e emission factor for MSW incineration can be calculated by considering the mass of gas emitted, the GWP of the gas, and the mass of MSW incinerated. The value of the CO2-e emission factor varies based on the composition of MSW and the incineration technology used. The CO2-e emission factor is critical for quantifying GHG emissions from waste-to-energy incineration.
Waste-to-energy incineration is one of the most common methods for treating municipal solid waste (MSW). The incineration of MSW can emit anthropogenic greenhouse gas (GHG) emissions, which can contribute to climate change. In this answer, we will explain how waste-to-energy incineration for MSW treatment emits anthropogenic GHG and formulate the calculation for its CO2-e emission factor.
MSW incineration emits greenhouse gases (GHG) as a result of incomplete combustion and the release of carbon dioxide and other air pollutants. CO2, N2O, and CH4 are among the GHGs that contribute to climate change. MSW waste-to-energy incineration emits more CO2 than other GHGs, accounting for more than 90% of the total GHG emissions. CO2, N2O, and CH4 are the three major greenhouse gases produced by MSW incineration (Liao et al., 2020).
Emission factors are commonly used to estimate GHG emissions from waste incineration facilities. CO2 equivalents are used in the calculation of emission factors. The carbon dioxide equivalent of a particular greenhouse gas is the amount of CO2 that would have the same global warming potential over a specified time period. The emission factor can be calculated as follows:
CO2-e emission factor= (mass of gas emitted * GWP of the gas) / mass of MSW incinerated
Where, GWP= Global Warming Potential
For example, the emission factor for carbon dioxide can be calculated as follows:
CO2-e emission factor for CO2= (mass of CO2 emitted * GWP of CO2) / mass of MSW incinerated
= (10,000 kg * 1) / 1,000,000 kg
= 0.01 ton CO2-e per ton MSW incinerated
Therefore, the CO2-e emission factor for MSW incineration can be calculated by considering the mass of gas emitted, the GWP of the gas, and the mass of MSW incinerated. The value of the CO2-e emission factor varies based on the composition of MSW and the incineration technology used. The CO2-e emission factor is critical for quantifying GHG emissions from waste-to-energy incineration.
To know more about greenhouse gases, visit:
https://brainly.com/question/28138345
#SPJ11
The Contractor has commenced Works after a period of suspension due to non-payment, (MDB 2005). He gives a notice of claim for the suspension and proceeds with the Works diligently. In the meantime, the Contractor submits a claim for extension of time with costs. In the process of the examination of the claim, the Engineer establishes that indeed the Contractor has a right to an extension of time of ten months. However, if awarded, Time for Completion will be way beyond the Taking Over date. The Engineer therefore rejects the claim with the argument that the Contractor does not require the additional time to complete the Works. The Contractor objects, stating that it is his contractual right and declares a dispute that is referred to you for a decision. During the hearing, which takes place after the Works have been taken over, the Contractor still argues for additional time of well beyond the Time for Completion. What decision will you make and why?
Answers
In this scenario, I would rule in favor of the Engineer and reject the Contractor's claim for additional time beyond the Time for Completion.
According to the given information, the Engineer has established that the Contractor is entitled to an extension of time of ten months. However, awarding such an extension would result in the Time for Completion being significantly exceeded. The Engineer argues that the Contractor does not require the additional time to complete the Works.
The basis for my decision lies in the fact that the Works have already been taken over. Once the Works have been taken over, it signifies that the project is deemed complete and the Contractor's obligations have been fulfilled. Granting an extension of time beyond the Taking Over date would essentially mean extending the Contractor's obligations indefinitely, which goes against the completion of the project.
Considering that the Works have already been taken over, the Contractor's claim for additional time beyond the Time for Completion cannot be justified. The Engineer's rejection of the claim is valid, and the decision is in line with the completion of the project and the contractual obligations of the parties involved.
To know more about additional time, visit;
https://brainly.com/question/29941610
#SPJ11
The cantilever beam is subjected to fixed support a) Calculate the reactions at supports A b) Construct the shear force diagram (SFD) and bending moment diagram (BMD) for the beam, indication all important values on each diagram. 4.0 KN 1.5 kN/m A В 2.0 m -1.0 m-1.0 m Figure 3
Answers
To calculate the reactions at supports A of the cantilever beam and construct the shear force diagram (SFD) and bending moment diagram (BMD), follow the steps below.
How to calculate the reactions at supports A?To calculate the reactions at support A, we can use the principle of equilibrium. Since the beam is a cantilever with a fixed support at A, the reaction at A will have both vertical and horizontal components.
The vertical component will counteract the vertical load of 4.0 kN and the uniformly distributed load of 1.5 kN/m acting downward, while the horizontal component will provide the necessary moment to balance the bending moment caused by the loads.
To construct the SFD and BMD, we need to analyze the beam segment by segment and determine the shear forces and bending moments at each point along the beam. At point B (2.0 m from the fixed support), the shear force will be equal to the reaction at support A. The bending moment at B will be zero since it is the point of contraflexure.
Moving towards support A, the shear force will remain constant until reaching the point where the uniformly distributed load starts (at 1.0 m from B). From there, the shear force will decrease linearly due to the distributed load.
For the BMD, it will be linear and downward sloping throughout the beam due to the uniformly distributed load. At the fixed support A, the bending moment will be zero.
Learn more about cantilever beam
brainly.com/question/31769817
#SPJ11
Type or paste question here
Q. No. 1 The specific discharge 'q' of water in an open channel is assumed to be a function of the depth of flow in the channel y' the height of the roughness of the channel surface 'e the acceleratio
Answers
The flowrate 'g' will change when the channel roughness 'e' doubled.[tex]q_0 = \sqrt{2}q_1[/tex]
The specific discharge 'q' of water in an open channel is assumed to be a function of the depth of flow in the channel y' the height of the roughness of the channel surface 'e' the acceleration due to gravity 'g' and the slope 's' of the area where the channel is placed.
Make use of dimensional analysis to determine how the flowrate 'g' will change when the channel roughness 'e' doubled.
q = [M⁰ L¹ T⁰]
y = [M⁰ L¹ T⁰]
e = [M⁰ L¹ T⁰]
g = [M⁰ L T⁻²]
s₀= [M⁰ L⁰ T⁰]
s₀ = q[y]ᵃ [c]ᵇ [g]ⁿ
[M⁰ L⁰ T⁰] = [M⁰ L¹ T⁻¹] [L]ᵃ [L]ᵇ [LT⁻²]ⁿ
0 = 1 + a + b + n
0 = -2 -2c
c = -1/2
a + b = -1 + 1/2 = -1/2
Let a = 0, b = -1/2
s₀ = q[e]^-1/2 [g]^-1/2
[tex]s_0 = \frac{q}{e^{1/2}*g^{1/2}}[/tex]
[tex]q_0 = \sqrt{2}q_1[/tex]
Learn more about dimensional analysis here:
https://brainly.com/question/17620509
#SPJ4
Complete Question:
Q. No. 1 The specific discharge 'q' of water in an open channel is assumed to be a function of the depth of flow in the channel y' the height of the roughness of the channel surface 'e the acceleration due to gravity 'g' and the slope 's' of the area where the channel is placed. Make use of dimensional analysis to determine how the flowrate 'g' will change when the channel roughness 'e' doubled.
Problem 3. (25%) Determine the forces in each member of the truss, and state if the members are in tension or compression. The supports at A and E are rollers. You must include FBDs. E 3 m B 1m 1m -2 m- 2 m 600 N
Answers
The forces in each member of the truss are as follows: a) F_AB = 0 N (compression) b) F_BC = F_CD = 150 N (tension) c)F_BD = 150 N (tension)
Free Body Diagram (FBD)
We start by drawing the FBD of the truss. We need to identify the external forces acting on the truss and label the reactions at the supports.
```
A E
| |
| |
----300 N----300 N----
| |
B C
```
Equilibrium Equations
Next, we apply the equilibrium equations to determine the forces in each member.
Vertical Equilibrium:
At joint B:
-ΣFy = 0
300 N - F_BC - F_BD = 0
F_BC + F_BD = 300 N (Equation 1)
Horizontal Equilibrium:
At joint B:
-ΣFx = 0
-F_AB - F_BD + F_BC = 0
F_AB + F_BD - F_BC = 0 (Equation 2)
At joint C:
-ΣFx = 0
-F_BC + F_CD = 0
F_BC = F_CD (Equation 3)
Solving Equations
We have three equations (Equations 1, 2, and 3) with three unknowns (F_AB, F_BC, and F_BD). Solving these equations will give us the forces in each member.
From Equation 3, we can see that F_BC = F_CD. Let's denote F_BC = F_CD = F.
Substituting F_BC = F_CD = F in Equations 1 and 2:
Equation 1: F + F_BD = 300 N
Equation 2: F_AB + F_BD - F = 0
Combining both equations, we have:
F_AB = 2F - 300 N
Calculation
Substituting F_AB = 2F - 300 N in Equation 2:
2F - 300 N + F_BD - F = 0
3F - F_BD = 300 N
F_BD = 3F - 300 N
Substituting F_BD = 3F - 300 N in Equation 1:
F + (3F - 300 N) = 300 N
4F = 600 N
F = 150 N
Therefore, F_AB = 2F - 300 N = 2(150 N) - 300 N = 0 N (compression)
F_BC = F_CD = F = 150 N (tension)
F_BD = 3F - 300 N = 3(150 N) - 300 N = 150 N (tension)
Hence, the forces in each member of the truss are as follows:
F_AB = 0 N (compression)
F_BC = F_CD = 150 N (tension)
F_BD = 150 N (tension)
Learn more about tension:
https://brainly.com/question/138724
#SPJ11
What's the difference between a feedback and feedforward control? What happens when they work together? what effect they had?
Answers
Feedback control uses information about the current state to make adjustments, while feedforward control proactively adjusts the input based on anticipated disturbances.
The main difference between feedback and feedforward control lies in the timing and direction of information flow. Feedback control uses information about the current state or output of a system to adjust the input and maintain stability or achieve a desired outcome. Feedforward control, on the other hand, anticipates disturbances or changes in the system and adjusts the input before they occur.
When feedback and feedforward control work together, they can enhance the overall performance of a system. Feedback control is effective at compensating for disturbances or errors that occur after they are detected. It continuously monitors the system's output and makes corrections accordingly. Feedforward control, on the other hand, proactively adjusts the input based on anticipated disturbances or changes. By doing so, it can minimize the impact of these disturbances and improve the system's response.
To better understand this, let's consider an example of a temperature control system for a room. In this system, the desired temperature is set at 70°F.
Feedback control constantly measures the current temperature in the room and compares it to the desired temperature. If the actual temperature deviates from the desired temperature, the feedback controller adjusts the heating or cooling system to bring the temperature back to the desired level.
Feedforward control, on the other hand, takes into account external factors that can affect the room temperature. For example, if it's a sunny day, the feedforward control system can anticipate that the room temperature may increase due to solar heat gain and proactively adjust the cooling system to counteract the temperature rise before it occurs.
When feedback and feedforward control work together in this temperature control system, the feedback control continuously monitors and adjusts the temperature based on the current state, while the feedforward control anticipates and compensates for external factors. This combined approach can lead to more precise temperature control and faster response to disturbances, resulting in a more comfortable environment.
In summary, feedback control uses information about the current state to make adjustments, while feedforward control proactively adjusts the input based on anticipated disturbances. When used together, they can enhance the performance of a system by compensating for both known and unknown factors, resulting in improved stability and response.
Learn more about feedforward on
https://brainly.com/question/13528017
#SPJ11
T 1 in. -b- b TO (1) (3) P2.2-1 Prob. 2.2-2. The structural tee shown in Fig. P2.2-2 supports a compressive load P = 200 kN. (a) Determine the coordi- nate y of the point R in the cross section where the load must act in order to produce uniform compressive axial stress in the member, and (b) determine the magnitude of that com- pressive stress. (2) t = 0.25 in. P YR 80 mm 10 mm (a) y 80 mm R (b) P2.2-2 15 mm 120 mm P
Answers
The coordinate y of point R in the cross-section is approximately 17.88 mm and the total area of the rectangle is = A1 + A2 = 800 mm^2 + 1800 mm^2 = 2600 mm^2
The magnitude of the compressive stress is approximately 76.92 N/mm^2 and it can be calculated as The magnitude of the compressive stress can be calculated as follows: Compressive stress = P / Atotal = (200 kN) / (2600 mm^2) = (200,000 N) / (2600 mm^2) ≈ 76.92 N/mm^2.
To solve this problem, we need to determine the coordinates of point R where the load must act to produce uniform compressive axial stress in the member, as well as the magnitude of the compressive stress.
Let's analyze the given information and solve the problem step by step:
Load P = 200 kN
t = 0.25 in.
YR = 80 mm
P2.2-2 = 15 mm
120 mm
(a) Determine the coordinate y of the point R in the cross-section:
To find the coordinate y of point R, we need to find the centroid of the cross-section. The centroid is the geometric center of the shape.
The cross-section consists of two rectangles. Let's calculate the centroid using the following formulas:
For rectangle 1:
Height = 80 mm
Width = 10 mm
Centroid coordinates for rectangle 1:
x1 = (10 mm)/2 = 5 mm (since the rectangle is symmetric along the y-axis)
y1 = (80 mm)/2 = 40 mm
For rectangle 2:
Height = 15 mm
Width = 120 mm
Centroid coordinates for rectangle 2:
x2 = (120 mm)/2 = 60 mm
y2 = (15 mm)/2 = 7.5 mm
To find the centroid coordinates for the entire cross-section, we can take the weighted average of the individual centroids based on their areas.
The area of rectangle 1: A1 = (80 mm) * (10 mm) = 800 mm^2
The area of rectangle 2: A2 = (120 mm) * (15 mm) = 1800 mm^2
Total area: Atotal = A1 + A2 = 800 mm^2 + 1800 mm^2 = 2600 mm^2
Now, let's calculate the centroid coordinates for the entire cross-section:
x = (A1 * x1 + A2 * x2) / A total = (800 mm^2 * 5 mm + 1800 mm^2 * 60 mm) / 2600 mm^2 ≈ 39.23 mm
y = (A1 * y1 + A2 * y2) / A total = (800 mm^2 * 40 mm + 1800 mm^2 * 7.5 mm) / 2600 mm^2 ≈ 17.88 mm
(b) Determine the magnitude of the compressive stress:
To determine the magnitude of the compressive stress, we need to divide the applied load P by the cross-sectional area.
The cross-sectional area consists of two rectangles. Let's calculate the total area:
Area of rectangle 1: A1 = (80 mm) * (10 mm) = 800 mm^2
Area of rectangle 2: A2 = (120 mm) * (15 mm) = 1800 mm^2
Total area: Atotal = A1 + A2 = 800 mm^2 + 1800 mm^2 = 2600 mm^2
Learn more about magnitude from the given link!
https://brainly.com/question/30236238
#SPJ11
What is the volume of the cube? SHOW WORK PLEASE
Answers
help me pleaseee!!!!!
Answers
Answer: 37.5%
Step-by-step explanation:
There are 8 separate area
and among them are 3 Cs.
Thus the probability is
⅜ times 100 = 37.5 (%)
A horizontal curve was designed for a two-lane highway with 10-foot lanes and 4-foot shoulders. The curve has the following conditions: • R=140 feet • Side friction = 0.348 Large building exists on the inside of the curve. Inside edge of road (shoulder) is 10 feet from the building. Assume perception and reaction time is 2.5 second and a = 11.2 ft/sec^2 Calculate the design speed of the curve.
Answers
Clearance distance is to be provided to the object for covering the horizontal distance of the inner side of the curve for the adequate slight distance so required. By calculating, the design of the inner circle will be 2.67m.
Now, we have to assume that the length is more than the distance.
m = ( R - D) - ( R - D ) × Cos [tex]\frac{\alpha }{2}[/tex]
where, m is distance
R is radius of the curve
D is the distance
α is the angle of the radius
Hence, the formula is
[tex]\frac{\alpha }{2}[/tex] = SSD × 180 / 2 × π × (R -D)
now, L = 200m , SSD = 80m and R = 300m
d= 7.5/4 = 1.875m
[tex]\frac{\alpha }{2}\\[/tex] = 80 × 180 / 2 × π and (300 - 1.875)
[tex]\frac{\alpha }{2}[/tex] = 7.687
m = 2.67m
Therefore, the distance from the center line of the circle is 2.67m.
To learn more about distance :
https://brainly.com/question/26550516
#SPJ4
Two A -6% grade and a 2% grade intersect at station 12+200 whose elevation is 45.673m. The two grades are to be connected by a symmetrical parabolic curve, 160m long. Find the elevation of the first quarter point on the curve.
Answers
The elevation of the first quarter point on the curve is 45.673 + 16.41 = 62.083 m.
Given that, Two A -6% grade and a 2% grade intersect at station 12+200 whose elevation is 45.673m. The two grades are to be connected by a symmetrical parabolic curve, 160m long.
To Find: The elevation of the first quarter point on the curve.
Concept Used:
Simpson's Rule
The elevation of the first quarter point on the curve can be found using the Simpson's Rule, which is given by;
∆h = 2 × l × [(1 / 6 f₁) + (4 / 6 f₂) + (1 / 6 f₃)]
Where,
l = Length of each curve
f₁ = Elevation at P₁
f₂ = Elevation at P₂
f₃ = Elevation at P₃
Here, l = 160 / 4
= 40, as the curve is to be divided into four equal parts (quarter points).
And the elevations of P₁, P₂ and P₃ can be found using the given information about the two grades, which are A -6% grade and a 2% grade.
Elevation of A -6% grade;
Elevation at Station 12+200 = 45.673 m
Elevation at the end of the curve = 45.673 - (6/100) × 160
= 35.473 m
Elevation of 2% grade;
Elevation at Station 12+200 = 45.673 m
Elevation at the end of the curve = 45.673 + (2/100) × 160
= 48.673 m
Hence, the elevations of P₁, P₂, and P₃ are as follows;
P₁ = 45.673 m
P₂ = 40.073 m
P₃ = 44.873 m
Now, substituting the values in Simpson's Rule to find the elevation of the first quarter point on the curve, we get;
∆h = 2 × 40 × [(1 / 6 × 45.673) + (4 / 6 × 40.073) + (1 / 6 × 44.873)]
∆h = 16.41
To know more about the quarter, visit:
https://brainly.com/question/32033933
#SPJ11