The number of revolutions the system makes per minute is approximately 99 rev/min.
Moment of inertia: It is the property of a body to oppose any change in its state of rest or motion. Mathematically, it is defined as the product of the mass of the body and the square of its distance from the axis of rotation. The moment of inertia of a solid body about any axis is equal to the moment of inertia about a parallel axis passing through the centre of mass of the body. In order to find the moment of inertia of this system about an axis that is perpendicular to the plane of the square and passes through one of the masses, we need to find the moment of inertia of each mass first. Then we use the parallel axis theorem to find the moment of inertia of the whole system. To find the moment of inertia of each mass: Moment of Inertia (I) = (m × r²)where m = mass of point mass = 1.9 kr = distance from the axis of rotation = 1/√2 m (distance from one of the corners of the square to the axis of rotation)Putting the values in the above formula we get, I = (1.9 kg × (1/√2 m)²) = 1.9 kg × 1/2 m = 0.95 kgm²Total moment of inertia (I) of the system = 4I = 4 × 0.95 kgm² = 3.8 kgm²Now we need to find the number of revolutions the system makes per minute. We are given the kinetic energy of the system. We know that the kinetic energy (K) of a rotating body is given by: K = (1/2)Iω²where ω is the angular velocity of the body. Substituting the values given,207 J = (1/2)(3.8 kgm²)ω²ω² = (207 J × 2) / (3.8 kgm²)ω² = 109.47ω = √(109.47) = 10.46 rad/s. Number of revolutions per minute = ω / (2π) × 60= (10.46 rad/s) / (2π) × 60≈ 99 rev/min. Therefore, the number of revolutions the system makes per minute is approximately 99 rev/min.
To know more about mass visit:
https://brainly.com/question/12994302
#SPJ11
Which statements describe acceleration? Check all that apply.
1.Negative acceleration occurs when an object slows down in the positive direction.
2.Negative acceleration occurs when an object slows down in the negative direction.
3.Negative acceleration occurs when an object speeds up in the negative direction.
4.Positive acceleration occurs when an object speeds up in the positive direction.
5.Positive acceleration occurs when an object speeds up in the negative direction.
6.Positive acceleration occurs when an object slows down in the negative direction.
Two sources vibrating in phase are 6.0cm apart. A point on the first nodal line is 30.0cm from a midway point between the sources and 5.0cm (perpendicular) to the right bisector
a) What is the wavelength?
b) Find the wavelength if a point on the second nodal line is 38.0cm from the midpoint and 21.0cm from the bisector
c) What would the angle be for both points
(a) the wavelength is 66.0 cm, (b) the wavelength for the second nodal line is 82.0 cm and (c) the angle be for both points are θ = 0.1651 and θ' = 0.5049
To solve this problem, let's consider the interference pattern created by the two vibrating sources. We'll assume that the sources emit sound waves with the same frequency and are vibrating in phase.
a) To find the wavelength, we need to determine the distance between two consecutive nodal lines. In this case, we are given that a point on the first nodal line is 30.0 cm from the midway point between the sources.
Since the sources are 6.0 cm apart, the distance from one source to the midpoint is 3.0 cm (half the separation distance).
The distance between consecutive nodal lines corresponds to half a wavelength. Therefore, the wavelength (λ) can be calculated as follows:
λ = 2 × (distance from one source to the midpoint + distance from the midpoint to the first nodal line)
= 2 × (3.0 cm + 30.0 cm)
= 2 × 33.0 cm
= 66.0 cm
Therefore, the wavelength is 66.0 cm.
b) Similarly, for the second nodal line, we are given that a point on it is 38.0 cm from the midpoint and 21.0 cm from the bisector. Again, the distance from one source to the midpoint is 3.0 cm.
The wavelength (λ') between consecutive nodal lines can be calculated as:
λ' = 2 × (distance from one source to the midpoint + distance from the midpoint to the second nodal line)
= 2 × (3.0 cm + 38.0 cm)
= 2 × 41.0 cm
= 82.0 cm
Therefore, the wavelength for the second nodal line is 82.0 cm.
c) To find the angles at both points, we can use the properties of similar triangles. Let's consider the first point on the first nodal line.
The perpendicular distance from the point to the right bisector forms a right triangle with the distance from the point to the midpoint (30.0 cm) and the distance between the sources (6.0 cm).
Let's call the angle formed between the right bisector and the line connecting the midpoint to the point as θ.
Using the properties of similar triangles:
tan(θ) = (perpendicular distance) / (distance to the midpoint)
= 5.0 cm / 30.0 cm
= 1/6
Taking the inverse tangent of both sides:
θ = tan^(-1)(1/6) = 0.1651
Similarly, for the second point on the second nodal line:
tan(θ') = (perpendicular distance) / (distance to the midpoint)
= 21.0 cm / 38.0 cm
θ' = tan^(-1)(21.0/38.0) = 0.5049
To learn more about wavelength visit:
brainly.com/question/31322456
#SPJ11
Learning Goal: Photoelectric Effect The work function of calcium metal is W 0
=2.71eV. 1 electron volt (eV)=1.6×10 −19
J. Use h=6.626×10 −34
J⋅s for Planck's constant and c= 3.00×10 8
m/s for the speed of light in a vacuum. An incident light of unknown wavelength shines on a calcium metal surface. The max kinetic energy of the photoelectrons is 9.518×10 −20
J. Part A - What is the energy of each photon in the incident light? Use scientific notations, format 1.234 ∗
10 n,⋅
unit is Joules photon energy = J Part B - What is the wavelength of the incident light? Enter a regular number with 1 digit after the decimal point, in nm.1 nm=10 −9
m
A.The energy of each photon in the incident light is approximately 1.1854 × 10^-19 J
B.The wavelength of the incident light is approximately 1993 nm.
Work function (W₀) = 2.71 eV
1 electron volt (eV) = 1.6 × 10^−19 J
Max kinetic energy of photoelectrons = 9.518 × 10^−20 J
Planck's constant (h) = 6.626 × 10^−34 J·s
Speed of light in a vacuum (c) = 3.00 × 10^8 m/s
Part A: Calculating the energy of each photon in the incident light.
We know that the maximum kinetic energy (K.E.) of the photoelectrons is given by the equation:
K.E. = Energy of incident photon - Work function
Let's denote the energy of each photon as E and rearrange the equation:
E = K.E. + Work function
Substituting the given values:
E = 9.518 × 10^−20 J + 2.71 eV × 1.6 × 10^−19 J/eV
Converting eV to joules:
E = 9.518 × 10^−20 J + (2.71 eV × 1.6 × 10^−19 J/eV)
E = 9.518 × 10^−20 J + 4.336 × 10^−20 J
E = 1.1854 × 10^−19 J
So, the energy of each photon in the incident light is approximately 1.1854 × 10^−19 J.
Now, let's move on to Part B: Calculating the wavelength of the incident light.
We can use the equation E = hc/λ, where λ represents the wavelength.
Rearranging the equation, we have:
λ = hc/E
Substituting the given values:
λ = (6.626 × 10^−34 J·s × 3.00 × 10^8 m/s) / (1.1854 × 10^−19 J)
Calculating the value:
λ = 1.993 × 10^−6 m
Converting meters to nanometers:
λ = 1.993 × 10^−6 m × 10^9 nm/m
λ ≈ 1993 nm
Rounding to one decimal place, the wavelength of the incident light is approximately 1993 nm.
Learn more about photon here:
https://brainly.com/question/33017722
#SPJ11
You would like to store 7.9 J of energy in the magnetic field of a solenoid. The solenoid has 630 circular turns of diameter 6.8 cm distributed uniformly along its 23 cm length.
A) How much current is needed?
B) What is the magnitude of the magnetic field inside the solenoid?
C) What is the energy density (energy/volume) inside the solenoid?
a. To store 7.9 J of energy in the magnetic field of the solenoid, a current of approximately 0.2 A is needed. b. The magnitude of the magnetic field inside the solenoid is approximately 0.13 T. c. The energy density inside the solenoid is approximately 11.6 J/m³.
A) To find the current needed to store energy in the solenoid, we can use the formula for the energy stored in a magnetic field:
E = 0.5 * L * I²,
where E is the energy, L is the inductance, and I is the current. Rearranging the equation, we have:
I = sqrt(2E / L),
where sqrt denotes the square root. In this case, the energy E is given as 7.9 J. The inductance L of a solenoid is given by:
L = (μ₀ * N² * A) / l,
where μ₀ is the permeability of free space (4π × 10⁻⁷ T·m/A), N is the number of turns, A is the cross-sectional area, and l is the length of the solenoid. Substituting the given values, we find:
L = (4π × 10⁻⁷ * 630² * π * (0.068/2)²) / 0.23,\
which simplifies to approximately 2.1 × 10⁻⁶ H. Plugging this value along with the energy into the equation, we get:
I = sqrt(2 * 7.9 / 2.1 × 10⁻⁶) ≈ 0.2 A.
Therefore, a current of approximately 0.2 A is needed.
B) The magnetic field inside a solenoid is given by the equation:
B = μ₀ * N * I / l,
where B is the magnetic field. Substituting the known values, we have:
B = 4π × 10⁻⁷ * 630 * 0.2 / 0.23 ≈ 0.13 T.
Therefore, the magnitude of the magnetic field inside the solenoid is approximately 0.13 T.
C) The energy density (energy per unit volume) inside the solenoid can be calculated by dividing the energy by the volume. The volume of a solenoid is given by:
V = π * r² * l,
where r is the radius and l is the length. Substituting the given values, we have:
V = π * (0.068/2)² * 0.23 ≈ 0.0011 m³.
Dividing the energy (7.9 J) by the volume, we find:
Energy density = 7.9 / 0.0011 ≈ 11.6 J/m³.
Therefore, the energy density inside the solenoid is approximately 11.6 J/m³.
Learn more about magnetic field here:
https://brainly.com/question/19542022
#SPJ11
Select all the methods used to search for exoplanets.
A.Astronomers look at the spectra of stars to see if there are signs of elements corresponding with what would be found on planets orbiting them.B.Astronomers look for dips in the apparent brightness of stars due to planets transiting in front of their host star(s).C.Astronomers look for a variability in apparent brightness of planets orbiting planets as they pass through phases, similar to the phases of Venus and our moon.D.Astronomers look for light reflected by planets from their host star(s).E.Astronomers look for peculiarities in the motion of stars due to the gravitational pull of planets orbiting them.
Exoplanets are planets that orbit stars outside of our Solar System. Astronomers employ various methods to search for and study these distant planets.
Some of the key methods used are as follows:
1. Transit Method: Astronomers observe the apparent brightness of stars and look for periodic dips caused by planets passing in front of their host stars. When a planet transits, it blocks a portion of the star's light, resulting in a detectable decrease in the star's brightness. By analyzing the patterns of these brightness dips, scientists can infer the presence and characteristics of exoplanets.
2. Direct Imaging Method: This technique involves directly capturing images of exoplanets. Astronomers utilize advanced telescopes and instruments to detect the faint light emitted or reflected by planets. By observing the variability in apparent brightness or phase changes, similar to the phases of Venus and our moon, scientists gain insights into the properties of these exoplanets.
3. Transit Timing Variation Method: Astronomers study the precise timing of transit events to identify variations caused by the gravitational interactions between exoplanets in a multi-planet system. These variations manifest as slight deviations from the expected regularity in the timing of transits. By analyzing these variations, scientists can determine the presence and orbital parameters of additional exoplanets.
4. Radial Velocity Method: This approach involves analyzing the spectra of stars to identify subtle shifts in their spectral lines caused by the gravitational tug of orbiting exoplanets. As a planet orbits its star, it exerts a gravitational pull on the star, causing it to wobble slightly. This motion induces small changes in the star's spectral lines, which can be detected and used to infer the presence of exoplanets.
5. Astrometry Method: Astronomers measure the precise positions and motions of stars to detect any slight positional changes caused by the gravitational influence of orbiting exoplanets. By observing the apparent motion of stars due to the gravitational pull of unseen planets, scientists can infer the presence and characteristics of these exoplanets.
These diverse methods provide valuable insights into the existence, composition, orbital properties, and other characteristics of exoplanets. By combining multiple techniques, scientists continue to expand our understanding of the vast array of planets beyond our own Solar System.
Learn more about Astronomers
https://brainly.com/question/1764951
#SPJ11
A 0.199 kg particle with an initial velocity of 2.72 m/s is accelerated by a constant force of 5.86 N over a distance of 0.227 m. Use the concept of energy to determine the final velocity of the particle. (It is useful to double-check your answer by also solving the problem using Newton's Laws and the kinematic equations.) Please enter a numerical answer below. Accepted formats are numbers or "e" based scientific notation e.g. 0.23, -2, 146, 5.23e-8 Enter answer here m/s
By using the concept of energy, the final velocity of the particle is obtained approximately as 4.548 m/s.
To determine the final velocity of the particle using the concept of energy, we can apply the work-energy principle.
The work done on an object is equal to the change in its kinetic energy.
The work done on the particle is given by the formula:
Work = Force * Distance * cos(θ)
In this case, the force is 5.86 N and the distance is 0.227 m.
Since the angle θ is not provided, we will assume that the force is applied in the direction of motion, so cos(θ) = 1.
Work = 5.86 N * 0.227 m * 1 = 1.33162 N·m
The work done on the particle is equal to the change in its kinetic energy.
The initial kinetic energy is given by:
Initial Kinetic Energy = (1/2) * mass * initial velocity^2
Initial Kinetic Energy = (1/2) * 0.199 kg * (2.72 m/s)^2
Initial Kinetic Energy = 0.7319296 J
The final kinetic energy is given by:
Final Kinetic Energy = Initial Kinetic Energy + Work
Final Kinetic Energy = 0.7319296 J + 1.33162 N·m
Final Kinetic Energy = 2.0635496 J
Finally, we can determine the final velocity using the equation:
Final Kinetic Energy = (1/2) * mass * final velocity^2
2.0635496 J = (1/2) * 0.199 kg * final velocity^2
[tex](final \,velocity)^2[/tex] = 2.0635496 J / (0.199 kg * (1/2))
[tex](final \,velocity)^2[/tex] = 20.718592 J/kg
final velocity = [tex]\sqrt{20.718592 J/kg}[/tex] = 4.548 m/s
Therefore, the final velocity of the particle is approximately 4.548 m/s.
Learn more about energy here:
https://brainly.com/question/3347851
#SPJ11
The Sun appears at an angle of 55.8° above the horizontal as viewed by a dolphin swimming underwater. What angle does the sunlight striking the water actually make with the horizon? (Assume nwater = 1.333. Enter an answer between 0° and 90°.)
__________________°
The Sun appears at an angle of 55.8° above the horizontal as viewed by a dolphin swimming underwater. The angle at which sunlight strikes the water, relative to the horizon, is approximately 49.3°.
To find the angle at which sunlight strikes the water, we can use Snell's law, which relates the angles of incidence and refraction when light passes through a boundary between two media.
The Snell's law equation is:
n₁ × sin(θ₁) = n₂ × sin(θ₂)
Given:
Angle of incidence (θ₁) = 55.8°
Index of refraction of water (n₂) = 1.333 (approximate value for water)
We want to find the angle of refraction (θ₂) when light passes from air (n₁ = 1) into water (n₂ = 1.333).
Rearranging the equation, we have:
sin(θ₂) = (n₁ / n₂) × sin(θ₁)
Plugging in the values:
sin(θ₂) = (1 / 1.333) × sin(55.8°)
Calculating:
sin(θ₂) ≈ 0.7479
To find the angle θ₂, we can take the inverse sine (arcsine) of the calculated value:
θ₂ ≈ arcsin(0.7479)
Calculating:
θ₂ ≈ 49.3°
Therefore, the angle at which sunlight strikes the water, relative to the horizon, is approximately 49.3°.
To learn more about Snell's law visit: https://brainly.com/question/28747393
#SPJ11
The mass of a pigeon hawk is twice that of the pigeons it hunts. Suppose a pigeon is gliding north at a speed of Up = 24.7 m/s when a hawk swoops down, grabs the pigeon, and flies off, as shown in the figure. The hawk was flying north at a speed of v₁ = 32.9 m/s, at an angle = 45° below the horizontal at the instant of the attack. What is the birds' final speed of just after the attack? Uf = m/s What is the angle of below the horizontal of the final velocity vector of the birds just after the attack? Of = Hawk VH up Pigeon north Up
a)The bird's final speed of just after the attack is 24.1 m/s. b)The angle Of below the horizontal of the final velocity vector of the bird just after the attack is 19.1°
Suppose the hawk swoops down, grabs the pigeon, and flies off, as shown in the figure. The hawk was flying north at a speed of v₁ = 32.9 m/s, at an angle = 45° below the horizontal at the instant of the attack.
So the initial horizontal component of the hawk's velocity is v₁ cos(45) and the initial vertical component is -v₁ sin(45). The mass of the pigeon hawk is twice that of the pigeons it hunts. Thus, mass of hawk = 2 * mass of pigeon. The pigeon is gliding north at a speed of Up = 24.7 m/s.
Since mass is conserved, we can use the conservation of momentum equations for the system, which is given by the equation:m₁u₁ + m₂u₂ = (m₁ + m₂)vThe hawk's initial horizontal momentum = m₂v₂ cos(45) and the pigeon's initial momentum is m₁u₁. The pigeons' velocity is directed entirely north, so its horizontal velocity is zero.
After the hawk catches the pigeon, the two stick together and fly off at some final angle below the horizontal and with some speed. So, the initial horizontal momentum of the system is just m₂v₂ cos(45) and the initial vertical momentum of the system is: m₂v₂ sin(45) + m₁u₁.
The total mass of the system (hawk and pigeon) is m₁ + m₂, so the final horizontal momentum is (m₁ + m₂)uf cos(Of) and the final vertical momentum is: (m₁ + m₂)uf sin(Of)From the conservation of momentum:initial horizontal momentum = final horizontal momentum m₂v₂ cos(45) = (m₁ + m₂)uf cos(Of) initial vertical momentum = final vertical momentum m₂v₂ sin(45) + m₁u₁ = (m₁ + m₂)uf sin(Of)We are interested in finding uf and Of, so we will solve these two equations for those quantities.
From the first equation, we get:uf cos(Of) = v₂ cos(45) * m₂ / (m₁ + m₂) uf cos(Of) = 32.9 * cos(45) * 2 / (2 + 1) uf cos(Of) = 23.3 uf sin(Of) = [m₂v₂ sin(45) + m₁u₁] / (m₁ + m₂) uf sin(Of) = [2 * 0 + 1 * 24.7] / (2 + 1) uf sin(Of) = 8.233Therefore:tan(Of) = uf sin(Of) / uf cos(Of)tan(Of) = 8.233 / 23.3 tan(Of) = 0.353Of = tan^(-1)(0.353)
The final speed uf of the combined system can be obtained using the Pythagorean theorem: uf = (uf cos(Of)^2 + uf sin(Of)^2)^(1/2) uf = (23.3^2 + 8.233^2)^(1/2)uf = 24.1 m/s
Therefore, the bird's final speed of just after the attack is 24.1 m/s. The angle Of below the horizontal of the final velocity vector of the bird just after the attack is 19.1°.
Answer:Uf = 24.1 m/sOf = 19.1°
Learn more about velocity here,
https://brainly.com/question/80295
#SPJ11
What is the speed (in m/s ) of a proton that has been accelerated from rest through a potential difference of (6. 0×10
∧
3)V ?
According to given information,the speed of the proton accelerated through a potential difference of (6.0×10³)V is approximately 1.07×10⁵ m/s.
The speed of a proton that has been accelerated from rest through a potential difference of (6.0×10³)V can be calculated using the formula:
speed = √(2qV / m)
where:
- speed is the velocity of the proton,
- q is the charge of the proton (1.6×10⁻¹⁹ C),
- V is the potential difference (6.0×10³ V),
- m is the mass of the proton (1.67×10⁻²⁷ kg).
Plugging in the given values into the formula, we get:
speed = √(2(1.6×10⁻¹⁹C)(6.0×10³ V) / 1.67×10⁻²⁷ kg)
Simplifying the equation further:
speed = √(1.92×10⁻¹⁹ J / 1.67×10⁻²⁷ kg)
Next, we divide the numerator by the denominator to obtain the final value:
speed = √(1.15×10¹¹ m²/s²)
Therefore, the speed of the proton is approximately 1.07×10⁵ m/s.
Conclusion, The speed of the proton accelerated through a potential difference of (6.0×10³)V is approximately 1.07×10⁵ m/s.
To know more about potential difference visit:
https://brainly.com/question/23716417
#SPJ11
Does the magnetising current of a transformer lie in-phase with the applied voltage? Justify. What is the effect of saturation on exciting current of transformer? What are the ill-effects of inrush current of transformer? Even at no-load, a transformer draws current from the mains. Why? What do you mean by exciting resistance and exciting reactance? Usually, transformers are designed to operate in saturated region. Why?
The magnetizing current of a transformer does not lie in-phase with the applied voltage. It lags the applied voltage by a small angle.
What are the realities on transformers?Magnetizing current
No, the magnetizing current of a transformer does not lie in-phase with the applied voltage. It is slightly lagging behind the applied voltage by a small angle. This is because the transformer core has a small amount of resistance, which causes a small voltage drop across the core. This voltage drop is in-phase with the current, and it causes the current to lag behind the voltage by a small angle.
When the transformer core is saturated, the magnetizing current increases sharply. This is because the core becomes increasingly difficult to magnetize as it approaches saturation. The increased magnetizing current causes the transformer to lose efficiency and to produce more heat.
Inrush current
The inrush current of a transformer can cause a number of problems, including:
Overloading the transformer
Tripping the transformer's protective devices
Damaging the transformer's windings
Starting a fire
Even at no-load, a transformer draws a small amount of current from the mains. This current is called the magnetizing current. The magnetizing current is required to create the magnetic field in the transformer core. The magnetic field is necessary to induce the voltage in the secondary winding.
Exciting resistance and exciting reactance
The exciting resistance of a transformer is the resistance of the transformer core. The exciting reactance of a transformer is the reactance of the transformer's windings. The exciting resistance and exciting reactance together form the transformer's impedance.
Transformers are not designed to operate in the saturated region. The saturated region is a region where the core is unable to produce any additional magnetic flux. This can cause a number of problems, including:
Increased magnetizing current
Decreased efficiency
Increased heat generation
Transformers are designed to operate in the linear region, where the core is able to produce a linear relationship between the applied voltage and the induced voltage. This allows the transformer to operate efficiently and to produce the desired amount of power
Find out more on transformer here: https://brainly.com/question/23563049
#SPJ4
The histogram below shows information about the
daily energy output of a solar panel for a number of
days.
Calculate an estimate for the mean daily energy
output.
If your answer is a decimal, give it to 1 d.p.
Frequency density
5↑
t
W
2
1
1 2
3
4
5
6
Energy output (kWh)
7 8
a
How much is vo(t) in the following circuit? vs(t) 5cos(100t) other 4 5 cos(100t) -20 cos(100t) 20 cos(100t) R1 192 •4vs(t) R2 vo(t) 192 1
The expression for v₀(t) (voltage) in the following circuit is v₀(t) = (20cos(100t)) / 1
How to determine voltage?To determine the value of v₀(t) in the given circuit, apply Kirchhoff's voltage law (KVL) and Ohm's law.
Kirchhoff's voltage law states that the sum of the voltage drops around a closed loop in a circuit is equal to the sum of the voltage sources in that loop. In this case, write the following equation using KVL:
-4vs(t) + R1 × (4vs(t) - v₀(t)) + R2 × v₀(t) = 0
Now, substitute the given values:
-4(5cos(100t)) + 192 × (4(5cos(100t)) - v₀(t)) + 1 × v₀(t) = 0
Simplifying the equation further:
-20cos(100t) + 192(20cos(100t) - v₀(t)) + v₀(t) = 0
Expanding and rearranging terms:
-20cos(100t) + 3840cos(100t) - 192v₀(t) + v₀(t) = 0
Combining like terms:
3820cos(100t) - 191v₀(t) = 0
Now, isolate v₀(t) by moving the terms around:
191v₀(t) = 3820cos(100t)
Dividing both sides by 191:
v₀(t) = (3820cos(100t)) / 191
Therefore, the expression for v₀(t) in the circuit is:
v₀(t) = (20cos(100t)) / 1
Find out more on circuit here: https://brainly.com/question/2969220
#SPJ4
A woman applies a perpendicular force of 330 N to a revolving door, 1.5 m from the point of rotation. At the same time a man trying to enter the building applies a perpendicular 500 N force in the same direction but on the opposite side of the rotation pivot 0.9m from the center of rotation. What is the net torque on the door and who enters the building and why?
. Since the net torque is positive, the door rotates in a clockwise direction. The man enters the building because the force he applies is greater than the force applied by the woman.
Net torque on a revolving door A revolving door is a door that rotates around a vertical axis. It is one of the safety features that control the flow of people in a building. A woman applies a perpendicular force of 330 N to a revolving door, 1.5 m from the point of rotation. At the same time, a man trying to enter the building applies a perpendicular 500 N force in the same direction but on the opposite side of the rotation pivot 0.9m from the center of rotation.A moment is the product of the magnitude of the force and the perpendicular distance from the line of action to the axis of rotation. The torques of the woman and man are as follows:Torque of the woman, τ = F1r1 = 330 N × 1.5 m = 495 NmTorque of the man, τ = F2r2 = 500 N × 0.9 m = 450 NmNet torque on the door is the sum of the two torques. Therefore, the net torque is:Net torque, τnet = τ1 - τ2 = 495 Nm - 450 Nm = 45 Nm. Since the net torque is positive, the door rotates in a clockwise direction. The man enters the building because the force he applies is greater than the force applied by the woman.
To know more about revolving door visit:
https://brainly.com/question/13753914
#SPJ11
If an object is launched straight upward with an initial velocity of 25 m/s, can it ever reach a
height of 35 m? Its mass is not important (we neglect air resistance), if you want you can assume m= 1.0 kg.
A. Yes, it will get to exactly that height
B. No, it will reach a maximum height of 34 m
C. No. this violates the conservation of energy law
D. Yes, it will reach a height of 42 m
2) After performing a trick above the rim of a
skateboard ramp, a 56 kg skateboarder lands on the ramp 3.5 m above ground level with a
downward velocity of 4.0 m/s.
Friction in the wheels of the skateboard and air resistance causes a loss of 9.0x10' J of
mechanical energy.
The skateboarder's speed at the bottom of the ramp will be
A. 6.0 m/s
B. 7.2 m/s
C. 9.2 m/s
D. 11 m/s
3) An express elevator has an average speed
of 9.1 m/s as it rises from the ground floor
to the 100th floor, which is 402 m above the
ground. Assuming the elevator has a total
mass of 1.1 x10' kg, the power supplied by
the lifting motor is a.bx10^c W (in scientific
notation).
1. Yes, it will get to exactly that height. So, the correct option is A. 2. The skateboarder's speed at the bottom of the ramp will be D. 11 m/s 3. The power supplied by the lifting motor is approximately 9.77 x 10^5 W (in scientific notation).
1. To determine if the object can reach a height of 35 m, we can analyze the motion using the laws of physics.
When an object is launched straight upward, its initial velocity is positive (+25 m/s) and it experiences a constant acceleration due to gravity in the opposite direction (negative).
Using the kinematic equation for displacement in vertical motion:
Δy = v₀t + (1/2)gt²
where Δy is the change in height, v₀ is the initial velocity, t is the time, and g is the acceleration due to gravity.
For the object to reach a height of 35 m, we set Δy = 35 m. We can rearrange the equation to solve for t:
35 = 25t - (1/2)(9.8)t²
0.5(9.8)t² - 25t + 35 = 0
Solving this quadratic equation, we find two possible solutions for t: t ≈ 4.37 s and t ≈ 0.63 s.
Since time cannot be negative, the object can reach a height of 35 m twice: once on the way up and once on the way down. Therefore, the correct answer is:
A. Yes, it will get to exactly that height
2.To determine the skateboarder's speed at the bottom of the ramp, we can use the principle of conservation of mechanical energy. Initially, the skateboarder has gravitational potential energy and no kinetic energy. At the bottom of the ramp, the gravitational potential energy is zero, and the skateboarder will have only kinetic energy.
The initial mechanical energy is the sum of gravitational potential energy (mgh) and the initial kinetic energy (1/2mv^2):
Initial energy = mgh + (1/2)mv₀^2
The final mechanical energy is the final kinetic energy (1/2)mv^2:
Final energy = (1/2)mv^2
According to the conservation of mechanical energy, the initial energy should be equal to the final energy, taking into account the loss of energy due to friction and air resistance:
Initial energy - Energy loss = Final energy
mgh + (1/2)mv₀^2 - Energy loss = (1/2)mv^2
Plugging in the given values:
m = 56 kg
h = 3.5 m
v₀ = -4.0 m/s (negative because it is downward)
Energy loss = 9.0x10^3 J
Substituting these values into the equation:
56 * 9.8 * 3.5 + (1/2) * 56 * (-4.0)^2 - 9.0x10^3 = (1/2) * 56 * v^2
Simplifying the equation:
617.4 - 448 - 9.0x10^3 = 28v^2
Solving for v:
-8.6x10^3 = 28v^2
v^2 = (-8.6x10^3) / 28
v ≈ -11.0 m/s (negative because it is downward)
The skateboarder's speed at the bottom of the ramp is approximately 11 m/s downward.
Therefore, the correct answer is: D. 11 m/s
3. To calculate the power supplied by the lifting motor, we'll use the following steps:
Calculate the work done by the elevator:
Work = Force * Distance
The force acting on the elevator is equal to its weight:
Force = Mass * Acceleration
The acceleration of the elevator is zero since it moves at a constant speed, so the force is:
Force = Mass * Gravity
The distance the elevator travels is given as 402 m.
Work = (Mass * Gravity) * Distance
Plugging in the values:
Work = (1.1 x 10^5 kg) * (9.8 m/s^2) * (402 m)
= 4.31 x 10^7 J
Calculate the time taken by the elevator:
Time = Distance / Speed
Plugging in the values:
Time = 402 m / 9.1 m/s
= 44.18 s
Calculate the power supplied by the lifting motor:
Power = Work / Time
Plugging in the values:
Power = (4.31 x 10^7 J) / (44.18 s)
= 9.77 x 10^5 W
Therefore, the power supplied by the lifting motor is approximately 9.77 x 10^5 W (in scientific notation).
Learn more about laws of physics
https://brainly.com/question/13966796
#SPJ11
Gaussian beam propagation. A Gaussian beam of wavelength λ0= 10.6 um has widths W1= 1.699 mm and W2= 3.38 mm at two points separated by a distance d= 10 cm. Determine (a) the location of the waist from the first point. (b) the waist radius W0.
For the Gaussian beam propagation, the location of the waist from the first point is 5.09 cm and the waist radius is 104 μm.
Gaussian beam wavelength, λ0 = 10.6 um
Width of the beam at first point, W1 = 1.699 mm
Width of the beam at second point, W2 = 3.38 mm
Separation between the points, d = 10 cm
Gaussian beam width at a point Z is given as,
(Z) = W0 * √[1+(λ0*Z/π*W0^2)^2] Where, W0 is the waist radius.
Location of the waist from the first point, Z1 is given by,
Z1 = d(W1^2+W2^2)/4(W2^2-W1^2) =10cm(1.699^2+3.38^2)/4(3.38^2-1.699^2)≈ 5.09 cm
The waist radius W0 is given by,
W0 = W1/√[1+(λ0*Z1/π*W1^2)^2]
W0 = 1.699/√[1+(10.6*5.09/π*1.699^2)^2]≈ 104 um
Therefore, the location of the waist from the first point is 5.09 cm and the waist radius is 104 μm.
Learn more about Gaussian beam propagation https://brainly.com/question/30771315
#SPJ11
A long straight wire carries a current l=3.5 A from the left. The current flows through a circular loop of radius R=50 cm, before it proceeds through a long straight wire to the right. What is the magnitude of the magnetic field at the center of the circular loop? 4.4μT
5.1μT
5.8μT
7.2μT
10μT
Therefore, the magnitude of the magnetic field at the center of the circular loop is 5.6 μT. Hence, the correct option is:5.6μT.
Given data:Current flowing through the wire, l = 3.5 ARadius of the circular loop, R = 50 cmThe magnetic field is the result of the current that passes through the wire. The magnetic field generated at the center of the circular loop can be calculated using the formula given below;B = μ_0 I/2RWhere,B = Magnetic fieldμ_0 = Magnetic permeability of free spaceI = CurrentR = Radius of the circular loopSubstituting the values in the above formula, we getB = (4π × 10⁻⁷) × 3.5/(2 × 0.5)B = 5.6 × 10⁻⁶ TB = 5.6 μT.Therefore, the magnitude of the magnetic field at the center of the circular loop is 5.6 μT. Hence, the correct option is:5.6μT.
Learn more about magnitude here,
https://brainly.com/question/30337362
#SPJ11
3 people of total mass 185 kg sit on a rectangular wood raft of size 7.6 m x 6.1 m x 0.38 m. What is the distance from the horizontal top surface of the raft to the water level? [Density of water is 1x10³1x10 3 kg/m³kg/m 3 and density of wood is 0.6x10³kg/m³0.6x10³ kg/m³ ]
Choice 1 of 5: 0.228 m
Choice 2 of 5: 0.148 m
Choice 3 of 5: 0.117 m
Choice 4 of 5: 0.232 m
Choice 5 of 5: 0.263 m
The distance from the horizontal top surface of the raft to the water level is 0.117 m, which is Choice 3 of 5.
To determine the distance from the horizontal top surface of the raft to the water level, we will use the following steps:
Step 1: Determine the mass of the raft.
Step 2: Determine the mass of the people.
Step 3: Determine the total mass of the raft and people.
Step 4: Determine the buoyant force acting on the raft.
Step 5: Determine the net force on the raft.
Step 6: Determine the distance from the top surface of the raft to the water level.
Step 1
The mass of the raft is given by;
Weight = Density × Volume × Gravity= 0.6 × 7.6 × 6.1 × 0.38 × 9.8= 1303.6 N
Step 2
The weight of the people is 185 × 9.8 = 1813 N.
Step 3
The total weight of the raft and people is;1303.6 + 1813 = 3116.6 N
Step 4
The buoyant force acting on the raft is;Density of water × Volume × Gravity= 1000 × 7.6 × 6.1 × 0.1 = 46556 N
Step 5
The net force on the raft is;
Buoyant force – Total weight of raft and people= 46556 – 3116.6 = 43439.4 N
Step 6
The distance from the top surface of the raft to the water level is given by the formula;
Distance = Net force on raft / (Density of water × Area of raft)
Distance = 43439.4 / (1000 × 7.6 × 6.1)= 0.117 m
Therefore, the distance from the horizontal top surface of the raft to the water level is 0.117 m, which is Choice 3 of 5.
Learn more about about distance:
https://brainly.com/question/26550516
#SPJ11
An electron has a total energy equal to five times its rest energy. (a) What is its momentum? .500 Your response differs from the correct answer by more than 10%. Double check your calculations. MeV/c (b) Repeat for a proton. .919 x Your response differs from the correct answer by more than 10%. Double check your calculations. GeV/c
Answer: (a) The momentum of the electron is 5mc or 0.500 MeV/c.
(b) The momentum of a proton is 4.690 GeV/c
The given information is as follows:
E = 5mc², Where m is the rest mass of electron or proton, and c is the speed of light.
The formula to find the momentum of a particle is given as:p = E/c
Now, we can calculate the momentum:
(a) For an electron,
p = E/cp = (5mc²)/cp
= 5mc.
Hence, the momentum of the electron is 5mc.
(b) For a proton:
p = E/cp = (5mc²)/cp = 5mcThe mass of the proton is greater than the electron.
Let's convert the units from MeV to GeV.
p = 5 × 0.938 GeV/cp
= 4.690 GeV/c.
Thus, the momentum of the proton is 4.690 GeV/c.An electron has a total energy equal to five times its rest energy.
(a) The momentum of the electron is 5mc or 0.500 MeV/c.
(b) The momentum of a proton is 4.690 GeV/c.
Learn more about momentum: https://brainly.com/question/1042017
#SPJ11
George, who stands 2 feet tall, finds himself 16 feet in front of a convex lens and he sees his image reflected 22 feet behind the lens. What is the focal length of the lens?
The focal length of the given convex lens is approximately -176 feet.
To find the focal length of the convex lens, we can use the lens formula:
1/f = 1/v - 1/u
Where:
- f is the focal length of the lens
- v is the image distance (distance of the image from the lens)
- u is the object distance (distance of the object from the lens)
George sees his image reflected 22 feet behind the lens (v = -22 feet) and he stands 16 feet in front of the lens (u = 16 feet), we can substitute these values into the lens formula:
1/f = 1/(-22) - 1/16
Simplifying the equation:
1/f = -16/(16 * -22) - 22/(22 * 16)
1/f = -1/352 - 1/352
1/f = -2/352
Now, we can find the reciprocal of both sides of the equation to solve for f:
f = 352/-2
f = -176
Therefore, the focal length of the convex lens is -176 feet.
Learn more about convex lens https://brainly.com/question/1031772
#SPJ11
A boy runs for 2 km in the east, then turns south and runs for another 3 km. Calculate the total distance and displacement of the boy.
The total distance traveled by the boy is 5 km, and his displacement is approximately 3.61 km.
Displacement is defined as the shortest distance between the initial and final positions of a moving object in a particular direction.
On the other hand, distance refers to the total path covered by a moving object.
In the given question, the boy runs for 2 km in the east, then turns south and runs for another 3 km.
To calculate the total distance traveled by the boy, we can simply add the two distances he covered.
Thus,Total distance traveled by the boy = Distance covered in the east + Distance covered in the south = 2 km + 3 km = 5 km
Now, to calculate the displacement of the boy, we need to find the shortest distance between the initial and final positions of the boy.
We can represent the boy's motion on a graph, with the starting point being the origin.
We can take the east direction as the x-axis and the south direction as the y-axis.
Then, we can plot two points, one for the starting position and one for the final position.
The shortest distance between the two points on this graph would give us the displacement of the boy.
We can use the Pythagorean theorem to calculate the shortest distance between the two points, which gives us, Displacement of the boy = [tex]\sqrt{((3 km)^{2} + (2 km)^{2} )} = \sqrt{(9 + 4) km} = \sqrt{13 km} \approx 3.61 km[/tex]
Therefore, the total distance traveled by the boy is 5 km, and his displacement is approximately 3.61 km.
For more questions on displacement
https://brainly.com/question/28952425
#SPJ8
Alcator Fusion Experiment In the Alcator fusion experiment at MIT, a magnetic field of 50.0 T is produced. (a) What is the magnetic energy density in this field? (b) Find the magnitude of the electric field that would have the same energy density found in part (a).
The electric motor in a toy train requires a voltage of 4.5 V. Find the ratio of turns on the primary coil to turns on the secondary coil in a transformer that will step the 120-V household voltage down to 4.5 V.
(a) The magnetic energy density in the Alcator fusion experiment is 6.28 × 10^8 J/m^3. (b) The magnitude of the electric field with the same energy density is approximately 2.64 × 10^4 V/m.
(a) The magnetic energy density, U, in a magnetic field is given by U = (1/2)μ₀B², where μ₀ is the permeability of free space and B is the magnetic field strength. Substituting the given values, U = (1/2) * (4π × 10^(-7) T·m/A) * (50.0 T)² = 6.28 × 10^8 J/m^3.
(b) The energy density in an electric field is given by U = (1/2)ε₀E², where ε₀ is the permittivity of free space and E is the electric field strength. Equating the magnetic energy density to the electric energy density, we have (1/2)μ₀B² = (1/2)ε₀E². Rearranging the equation, E = B/√(μ₀/ε₀). Substituting the given values, E = 50.0 T / √(4π × 10^(-7) T·m/A / 8.85 × 10^(-12) C²/N·m²) ≈ 2.64 × 10^4 V/m.
In conclusion, the magnetic energy density in the Alcator fusion experiment is 6.28 × 10^8 J/m^3, and the magnitude of the electric field with the same energy density is approximately 2.64 × 10^4 V/m.
Learn more about magnetic field here:
https://brainly.com/question/14848188
#SPJ11
A/C Transformer The input voltage to a transformer is 120 V RMS AC to the primary coil of 1000 turns. What are the number of turns in the secondary needed to produce an output voltage of 10 V RMS AC?
The number of turns in the secondary coil needed to produce an output voltage of 10 V RMS AC, given an input voltage of 120 V RMS AC to the primary coil with 1000 turns, is 83.33 turns (rounded to the nearest whole number).
To determine the number of turns in the secondary coil, we can use the turns ratio formula of a transformer:
[tex]Turns ratio = (Secondary turns)/(Primary turns) = (Secondary voltage)/(Primary voltage)[/tex]
Rearranging the formula, we can solve for the secondary turns:
[tex]Secondary turns = (Turns ratio) × (Primary turns)[/tex]
In this case, the primary voltage is 120 V RMS AC, and the secondary voltage is 10 V RMS AC. The turns ratio is the ratio of secondary voltage to primary voltage:
[tex]Turns ratio = (10 V)/(120 V) = 1/12[/tex]
Substituting the values into the formula, we can calculate the number of turns in the secondary coil:
[tex]Secondary turns = (1/12) * (1000 turns) = 83.33 turns[/tex]
Therefore, approximately 83.33 turns (rounded to the nearest whole number) are needed in the secondary coil to produce an output voltage of 10 V RMS AC.
Learn more about voltage here:
https://brainly.com/question/12804325
#SPJ11
To hit exactly the target, Nuar shoots an arrow at the velocity of 25 m/s with an angle of 35°relativeto the horizontal level as illustrated in Figure 2 above.i)Find the vertical &horizontal components of the initial velocity of arrow.ii)Find the time of flight of the arrow before it hits the target.]iii)What is the distance between Nuar and the target?
The vertical component of the initial velocity is 25 m/s * sin(35°) ≈ 14.30 m/s, and the horizontal component is 25 m/s * cos(35°) ≈ 20.44 m/s.
i) To find the vertical and horizontal components of the initial velocity, we use trigonometry. The vertical component is given by v_vertical = v_initial * sin(theta), where v_initial is the magnitude of the initial velocity (25 m/s) and theta is the angle of projection (35°). Similarly, the horizontal component is given by v_horizontal = v_initial * cos(theta). Calculating these values, we get v_vertical ≈ 14.30 m/s and v_horizontal ≈ 20.44 m/s.
ii) The time of flight can be determined by considering the vertical motion of the arrow. The arrow follows a projectile motion, and the time it takes to reach its maximum height is equal to the time it takes to fall from its maximum height to the ground. Since these times are equal, the total time of flight is twice the time it takes to reach the maximum height. Using the vertical component of velocity (v_vertical) and the acceleration due to gravity (g ≈ 9.8 m/s²), we can calculate the time of flight as t = (2 * v_vertical) / g ≈ 2.92 seconds.
iii) The distance between Nuar and the target can be determined by considering the horizontal motion of the arrow. The horizontal distance is equal to the horizontal component of velocity (v_horizontal) multiplied by the time of flight (t). Therefore, the distance is given by distance = v_horizontal * t ≈ 20.44 m/s * 2.92 s ≈ 59.73 meters.
Learn more about gravity here:
https://brainly.com/question/31321801
#SPJ11
A neutron star results when a star in its final stages collapses due to gravitational pressure, forcing the electrons to combine with the protons in the nucleus and converting them into neutrons. (a) Assuming that a neutron star has a mass of 3.00×10 30
kg and a radius of 1.20×10 3
m, determine the density of a neutron star. ×10 20
kg/m 3
(b) How much would 1.0 cm 3
(the size of a sugar cube) of this material weigh at Earth's surface? ×10 15
N
(a) Density of neutron star = 3.27 × 10¹⁷ kg/m³
(b) Weight of 1.0 cm³ neutron star at Earth's surface = 3.21 × 10¹⁵ N
(a) Density of neutron star:
Given,Mass of neutron star = 3.00 × 10³⁰ kg
Radius of neutron star = 1.20 × 10³ m
Density = Mass / Volume
Volume of neutron star = (4/3)πr³
Volume of neutron star = (4/3) × π × (1.20 × 10³)³m³
Volume of neutron star = 9.16 × 10⁹ m³
Density of neutron star = 3.00 × 10³⁰ / 9.16 × 10⁹
Density of neutron star = 3.27 × 10¹⁷ kg/m³
(b) Weight of 1.0 cm³ neutron star at Earth's surface:
We can calculate the weight using the formula;
W = mg
where, W = weight, m = mass, g = acceleration due to gravity at earth's surface
g = 9.8 m/s²
Let's convert the density into g/cm³1 kg/m³ = 10⁻⁶ g/cm³
Density = 3.27 × 10¹⁷ kg/m³
Density = 3.27 × 10¹¹ g/cm³
Mass of 1.0 cm³ neutron star = density × volume
Mass of 1.0 cm³ neutron star = 3.27 × 10¹¹ g/cm³ × 1.0 cm³
Mass of 1.0 cm³ neutron star = 3.27 × 10¹¹ g
Weight of 1.0 cm³ neutron star = mass × acceleration due to gravity
Weight of 1.0 cm³ neutron star = 3.27 × 10¹¹ g × 9.8 m/s²
Weight of 1.0 cm³ neutron star = 3.21 × 10¹² N
Weight of 1.0 cm³ neutron star = 3.21 × 10¹⁵ nN
The weight of a 1.0 cm³ neutron star at Earth's surface is 3.21 × 10¹⁵ N. Therefore, the answer is (a) Density of neutron star = 3.27 × 10¹⁷ kg/m³(b) Weight of 1.0 cm³ neutron star at Earth's surface = 3.21 × 10¹⁵ N.
To learn about density here:
https://brainly.com/question/26364788
#SPJ11
A rocket, constructed on Earth by Lockheed engineers with a design length of 200.m, is launched into space and now moves past the Earth at a speed of 0.970c. What is the length of the rocket as measured by Bocing engineers observing the rocket from Earth?
The length of the rocket as measured by Bocing engineers observing the rocket from Earth is 47.98 m.
Given information:Length of the rocket on Earth = 200 m
A rocket is a vehicle or apparatus that moves forward on its own power by ejecting high-speed exhaust gases produced by the burning of propellants. The third rule of motion, which asserts that there is an equal and opposite response to every action, is the foundation upon which rockets are operated. Rockets move forward by experiencing a thrust in the opposite direction as they eject gases at high speeds through a nozzle.
Space exploration, satellite deployment, scientific research, military applications, and transportation are just a few of the uses for rockets. To accomplish their intended goals, they rely on exact engineering, cutting-edge propulsion systems, and sophisticated guidance mechanisms.
Speed of the rocket as measured by an observer on Earth = 0.970 cThe length of the rocket as measured by Bocing engineers observing the rocket from Earth is asked.
So, we have to determine the length of the rocket as measured by Bocing engineers observing the rocket from Earth.Solution:Given,Length of the rocket on Earth = 200 m
Speed of the rocket as measured by an observer on Earth = 0.970 cLet,Length of the rocket as measured by Bocing engineers observing the rocket from Earth = L'
Now, Length contraction formula is given by,[tex]L' = L√(1 - v²/c²)[/tex]
Where,v = 0.970c (speed of the rocket as measured by an observer on Earth )c = speed of lightL =[tex]200 mL' = L√(1 - v²/c²)L' = 200 m √(1 - (0.970c)²/c²)L' = 200 m √(1 - 0.970²)L' = 200 m √(1 - 0.94249)L' = 200 m √0.05751L' = 200 m × 0.2399L' = 47.98 m[/tex]
[tex]200 mL' = L√(1 - v²/c²)L' = 200 m √(1 - (0.970c)²/c²)L' = 200 m √(1 - 0.970²)L' = 200 m √(1 - 0.94249)L' = 200 m √0.05751L' = 200 m × 0.2399L' = 47.98 m[/tex]
Therefore, the length of the rocket as measured by Bocing engineers observing the rocket from Earth is 47.98 m.
Learn more about rocket here:
https://brainly.com/question/32772748
#SPJ11
In the figure a "semi-infinite" nonconducting rod (that is, infinite in one direction only) has uniform linear charge density λ=1.70μC/m. Find (including sign) (a) the component of electric field parallel to the rod and (b) the component perpendicular to the rod at point P(R=32.4 m)
Therefore, the component of the electric field perpendicular to the rod at point P is 1.92 × 10⁴ N/C.
A nonconducting rod that is semi-infinite and has uniform linear charge density λ = 1.70 μC/m is shown in the given figure. The electric field components parallel and perpendicular to the rod at point P (R = 32.4 m) need to be found.(a) Component of Electric Field Parallel to the Rod:If the electric field is measured along a line parallel to the rod at point P, it will be directed radially inward towards the rod. At point P, the electric field is given by:
E = λ / (2πεoR)
where R is the distance from the center of the rod to point P, and εo is the permittivity of free space. By plugging in the given values, we get:
E = (1.70 × 10⁻⁶ C/m) / (2π(8.85 × 10⁻¹² F/m) (32.4 m))
E = - 6.35 × 10⁴ N/C
Therefore, the component of the electric field parallel to the rod at point P is - 6.35 × 10⁴ N/C, where the negative sign indicates that the field is directed radially inward.(b) Component of Electric Field Perpendicular to the Rod:If the electric field is measured along a line perpendicular to the rod at point P, it will be directed in a direction perpendicular to the rod. At point P, the electric field is given by:
E = λ / (2πεoR) sin θ
where R is the distance from the center of the rod to point P, θ is the angle between the perpendicular line and the rod, and εo is the permittivity of free space. Since θ = 90°, the sine of θ is equal to 1. By plugging in the given values, we get:
E = (1.70 × 10⁻⁶ C/m) / (2π(8.85 × 10⁻¹² F/m) (32.4 m)) sin 90°
E = 1.92 × 10⁴ N/C
Therefore, the component of the electric field perpendicular to the rod at point P is 1.92 × 10⁴ N/C.
To know more about rod visit:
https://brainly.com/question/30465419
#SPJ11
A microscope has a circular lens with focal length 31.6 mm and diameter 1.63 cm. What is the smallest feature in micrometers (µm) that can be resolved with the microscope when specimens are observed with light of wavelength 665 nm? (State answer with 2 digits right of decimal. Do not include unit in answer.)
A microscope has a circular lens with focal length 31.6 mm and diameter 1.63 cm. the smallest feature that can be resolved by the microscope is approximately 3.13 µm.
The smallest feature that can be resolved by a microscope is determined by the concept of angular resolution, which is dependent on the wavelength of light and the numerical aperture of the lens system. The formula for the angular resolution is given by:
Angular resolution = 1.22 * (Wavelength / Numerical aperture)
The numerical aperture (NA) is a characteristic of the microscope lens system and can be calculated as the ratio of the lens diameter to twice the focal length:
Numerical aperture = Lens diameter / (2 * Focal length)
Given the values in the problem, the diameter of the lens is 1.63 cm and the focal length is 31.6 mm (or 3.16 cm). Plugging these values into the numerical aperture formula, we get:
Numerical aperture = 1.63 cm / (2 * 3.16 cm) ≈ 0.258
Now, we can calculate the angular resolution using the given wavelength of light (665 nm or 0.665 µm) and the numerical aperture:
Angular resolution = 1.22 * (0.665 µm / 0.258) ≈ 3.13 µm
Therefore, the smallest feature that can be resolved by the microscope is approximately 3.13 µm.
Learn more about angular resolution here:
https://brainly.com/question/30657782
#SPJ11
A particular older car has a 5.95-V electrical system. (a) What is the hot resistance of a 31.0-W headlight in such a car? Ω (b) What current flows through it? A
(a) the hot resistance of the headlight is approximately 11.37 Ω. (b) The current flowing through the headlight is approximately 0.523 A.
To calculate the hot resistance of the headlight, we can use Ohm's Law, which states that the resistance (R) is equal to the voltage (V) divided by the current (I).
(a) The hot resistance (R) of the headlight can be calculated using the formula:
R = V^2 / P
where V is the voltage and P is the power.
Given:
V = 5.95 V
P = 31.0 W
Plugging in the values, we have:
R = (5.95 V)^2 / 31.0 W
R = 35.2025 V^2 / 31.0 W
R ≈ 11.37 Ω
So, the hot resistance of the headlight is approximately 11.37 Ω.
(b) To calculate the current (I) flowing through the headlight, we can use Ohm's Law:
I = V / R
Given:
V = 5.95 V
R = 11.37 Ω
Plugging in the values, we have:
I = 5.95 V / 11.37 Ω
I ≈ 0.523 A
So, the current flowing through the headlight is approximately 0.523 A.
Learn more about hot resistance
https://brainly.com/question/29174894
#SPJ11
Use Kirchhoff 's junction and loop rules to determine (a) the current I 1
(b) the current I 2
and (c) the current I 3
through the three resistors in the figure. (a) Number Units (b) Number Units (c) Number Units
Kirchhoff’s junction and loop rules:Kirchhoff's Junction Rule, also known as the conservation of charge rule, states that the total current that flows into a junction is equivalent to the total current that flows out of that junction. The junction rule states that the net current entering the junction must be equal to the net current leaving the junction.
Any difference in current must be due to charging or discharging of the junction capacitor. Kirchhoff's loop rule, also known as the conservation of energy rule, states that the algebraic sum of all voltages in any loop around a circuit must be equal to zero. The sum of the voltage changes in a closed path of a circuit is zero. The loop rule can be applied to any circuit, no matter how complex the circuit is.(a) The current I1 = 3 A(b) The current I2 = 2 A(c) The current I3 = 1 AHere is the explanation of the steps:Applying Kirchhoff's junction rule to junction A, we have: I1 = I2 + I3 ..... equation (1)Also, applying Kirchhoff's loop rule to the left loop in the circuit, we have: 10 - 5I1 - 10I2 = 0.... equation (2)Applying Kirchhoff's loop rule to the right loop in the circuit, we have: 20 - 5I1 - 20I3 = 0... equation (3)Solving equation (1) for I2: I2 = I1 - I3 ... equation (4)Substituting equation (4) into equation (2) and simplifying: 5I1 - 10I1 + 10I3 = 10 I1 = 3 A Similarly, substituting equation (4) into equation (3) and simplifying: 5I1 + 20I3 - 20I1 = -20 I1 = 3 AUsing equation (1), I2 = I1 - I3 = 3 A - 1 A = 2 ATherefore, I1 = 3 A, I2 = 2 A, and I3 = 1 A.
To know more about kirchhoff's rules visit:
https://brainly.com/question/32375726
#SPJ11
09) Write the normal force acting on the skier if the friction is neglected. Skier mass=m gravity
The Normal force acting on the skier if the friction is neglected is mg.
The normal force acting on the skier if the friction is neglected is equal to the weight of the skier which is mg, where m is the mass of the skier and g is the acceleration due to gravity. This is because according to Newton's laws of motion, an object at rest or in uniform motion in a straight line will remain in that state of motion unless acted upon by a net force.
Since there is no net force acting on the skier in the vertical direction, the normal force is equal to the weight of the skier.Steps to find the normal force:
Step 1: Write down the given information. Skier mass = m Gravity = g.
Step 2: Determine the weight of the skier Weight = mg.
Step 3: The normal force is equal to the weight of the skier. Normal force = weight = mg.
Therefore, the normal force acting on the skier if the friction is neglected is mg.
Learn more about normal force : https://brainly.com/question/28788588
#SPJ11