Fructose, a component of sucrose, and ribose, a component of nucleic
acid, have very similar structures.
How do they differ?
CH,OH
a
OH
OH OH
Ribose
CH,OH
OH
OH
Fructose
OH
CH,OH
1 of 8 QUESTIONS
Fructose has twice the amount of energy storage as ribose.
Fructose is used for short-term energy storage, while ribose helps produce
proteins.
Fructose is used for structural support in the cell, while ribose is used for
long-term energy storage.
Fructose is used to build up proteins, while ribose is used as a stabilizer in
plasma membranes.

Fructose, A Component Of Sucrose, And Ribose, A Component Of Nucleicacid, Have Very Similar Structures.How

Answers

Answer 1

Answer:

Ribose and deoxyribose are monosaccharides or simple sugars. They are al and undergo phosphorylation to form deoxyribonucleotides and ribonucleotides. They are of great biological importance that helps in the formation of a blueprint of an organism that is passed on to generations.

The nucleotides act as the building blocks of nucleic acids and help them to carry genetic information. Pentose sugar for RNA is ribose with 5 carbon atoms. Pentose sugar for DNA is deoxyribose.

Ribose was discovered by Emil Fischer and Oskar Pilot in the year 1891. Deoxyribose was discovered by Phoebus Leven in the year 1929. Some differences between deoxyribose and ribose based on structure, IUPAC name, molar mass, chemical formula, etc., are given below.

Deoxyribose vs Ribose

Deoxyribose and Ribose Sugar

Following are the major difference between deoxyribose and ribose:

Deoxyribose Ribose

Chemical formula

C5H10O4 C5H10O5

IUPAC name

2-deoxy-D-ribose

(2S,3R,4S,5R)-5-(hydroxymethyl)oxolane-2,3,4-triol

Structure

It has a hydrogen (H) atom at position 2 It has a hydroxyl (OH) group at position 2

Molar mass

134.13 g/ 150.13 g/

Also known as

2-deoxy-D-erythro-pentose D-Ribose

Discovery

1929 by Phoebus Leven 1891 by Emil Fischer and Oskar Pilot

Found in

DNA RNA

Explanation:


Related Questions

Describe the Fungal Attacker on Bats using the Scientific Method. Refer to the figure below and address each of the steps for the scientific process: observations, choose question, consult literature, develop a hypothesis, and design a study to collect data, analyze data, and draw conclusions.

Answers

Using the scientific method, the fungal attacker on bats is studied. Observations are made, questions are formulated, literature is consulted, a hypothesis is developed, a study is designed to collect and analyze data, and conclusions are drawn based on the findings.

Observations: The researcher observes that bats in a certain region are experiencing symptoms such as white growths on their noses, wing damage, and increased mortality rates. These observations suggest a potential fungal infection affecting the bats.

Choose Question: Based on the observations, a question is formulated: "What is the cause of the symptoms and increased mortality rates observed in bats in this region?"

Consult Literature: The researcher consults existing literature on bat diseases, fungal infections, and environmental factors that may impact bat populations. This helps gather background information and identify potential factors that could be contributing to the observed symptoms.

Develop a Hypothesis: Considering the observations and literature, a hypothesis is formulated: "The symptoms and increased mortality rates in bats are caused by a fungal pathogen."

Design a Study to Collect Data: The researcher designs a study to collect data, including conducting field surveys to assess the prevalence of the fungal pathogen in bat populations, collecting samples from affected bats for laboratory analysis, and documenting environmental factors that may be associated with the disease.

Analyze Data: The collected data is analyzed using appropriate statistical methods to determine the prevalence of the fungal pathogen, assess its association with the observed symptoms, and identify any significant correlations with environmental factors.

Draw Conclusions: Based on the data analysis, conclusions are drawn. If the results show a high prevalence of the fungal pathogen in affected bats, a correlation between the pathogen and the symptoms, and a significant association with specific environmental factors, it can be concluded that the fungal attacker is the likely cause of the observed symptoms and increased mortality rates in the bat population

In summary, by following the scientific method, the researcher systematically observes the symptoms in bats, formulates a question, consults literature, develops a hypothesis, designs and conducts a study to collect and analyze data, and draws conclusions based on the findings. This approach helps uncover the cause of the fungal infection in bats and provides a basis for further research and potential interventions to mitigate the impact on bat populations.

For more such information on: scientific method

https://brainly.com/question/1334245

#SPJ8

Which of the following is a skin pigment that protects cells from solar radiation damage?
A. Melanin
B. Keratin
C. Epidermis
D. Dermis

Answers

Answer:

A. Melanin.

Explanation:

Melanin is a skin pigment that protects cells from solar radiation damage.

Hope this helps!

Melanin is a skin pigment that protects cells form solar radiation damage

Which option lists the level of the biosphere that are broader than community?

-biome, population
-ecosystem, population
-biome, ecosystem
-ecosystem, individual

Answers

The option that lists the levels of the biosphere that are broader than the community is "biome, ecosystem."

In the hierarchy of the ecological organization, the community refers to the assemblage of different species that interact and coexist within a specific area. It represents the interactions among populations within a defined habitat. The community level focuses on the relationships between different species and their interactions.

Moving up the hierarchy, the next broader level is the ecosystem, which includes not only the community but also the physical environment in which the organisms live.

An ecosystem encompasses the biotic (living) and abiotic (non-living) components and their interactions within a particular area. It includes the community of organisms along with the physical factors such as climate, soil, water, and nutrient availability.

Above the ecosystem level, the next broader level is the biome, which refers to large-scale geographical areas characterized by distinct climate patterns, vegetation types, and ecological characteristics.

Biomes are broad categories that encompass multiple ecosystems sharing similar environmental conditions and supporting similar types of communities.

Therefore, the correct option is "biome, ecosystem," as it accurately represents the levels of the biosphere broader than the community.

For more such answers on biosphere

https://brainly.com/question/13217040

#SPJ8

Which chemical reaction represents the matter and energy conversions that occur during cellular respiration

Answers

The chemical reaction that represents the matter and energy conversions that occur during cellular respiration is C6H12O6 + 6O2 → 6CO2 + 6H2O + ATP.

Cellular respiration is the process by which cells convert glucose and oxygen into energy, carbon dioxide, and water. The reaction mentioned above is the overall equation for cellular respiration, which is a set of metabolic processes that occur in the mitochondria of cells.

The process of cellular respiration begins with glycolysis, which occurs in the cytoplasm of the cell. In glycolysis, glucose is broken down into two molecules of pyruvate. This process also results in the formation of two molecules of ATP. After glycolysis, the pyruvate molecules move into the mitochondria where they enter the citric acid cycle.

In the citric acid cycle, the pyruvate molecules are broken down further, releasing carbon dioxide and producing energy in the form of ATP. The electrons released during this process are carried by NADH and FADH2 molecules to the electron transport chain.

The electron transport chain is the final stage of cellular respiration and takes place in the inner mitochondrial membrane. Here, the electrons are used to generate a proton gradient, which drives the production of ATP via ATP synthase. The final products of cellular respiration are carbon dioxide, water, and ATP.

In summary, cellular respiration is the process by which cells convert glucose and oxygen into energy, carbon dioxide, and water. The chemical reaction that represents the matter and energy conversions that occur during cellular respiration is C6H12O6 + 6O2 → 6CO2 + 6H2O + ATP. This reaction involves glycolysis, the citric acid cycle, and the electron transport chain, which work together to generate ATP and other products.

Know more about Cellular respiration here :

brainly.com/question/14158795

#SPJ8

Which two cell structures are found in eukaryotic cells but not in prokaryotic cells?

Answers

Answer: Endoplasmic reticulum, microtubules, and the Golgi apparatus

Explanation:

Look at a diagram of these two different cells

Which of the following IS a piece of
evidence that Darwin used to support his
theory of evolution?
A. major differences between different species
B. fossil record
C. the amount of shared DNA between species

Answers

One piece of evidence that Darwin used to support his theory of evolution is the fossil record. The correct answer is B.

Fossils are preserved remains or traces of ancient organisms that provide a glimpse into past life forms. By studying fossils, Darwin observed a pattern of gradual changes in species over time, indicating a process of descent with modification.

Fossils provided evidence of extinct species that showed similarities to current species, suggesting a common ancestry and gradual transformation over generations.

The fossil record supports the idea of evolution by demonstrating a timeline of organisms and their transitional forms. Fossils of intermediate species, also known as transitional fossils, provide evidence of species evolving from one form to another.

For example, the discovery of fossilized fish with limb-like fins provided evidence for the evolution of land-dwelling vertebrates. These fossils support Darwin's concept of gradual change and the branching nature of evolution.

While major differences between different species and the amount of shared DNA between species are also important aspects of supporting the theory of evolution, the fossil record was a key piece of evidence that Darwin used to illustrate the historical progression of life forms and their evolutionary relationships. Therefore, the correct answer is B.

For more such answers on Fossils

https://brainly.com/question/11829803

#SPJ8

Multiple choice
Individuals with HIV sometimes contract pneumonia infection that is rare in the rest of the population because people with HIV
A. Are unable to fight off these pneumonia-causing organisms
B. Are most often exposed to these pneumonia-causing organisms
C. Release pheromones that attract the pneumonia-causing organisms
D. Release substances that increase the strength of the pneumonia-causing organisms

Answers

Answer: A
Explanation: Bacterial pneumonia can occur at any stage of HIV disease and at any CD4 cell count. However, as the CD4 cell count declines, the incidence of bacterial pneumonia increases as does the incidence of accompanying bacteremia and septicemia.

The number of possible genetically different gametes for an organism equals 2n where n is the number of pairs of chromosomes. If an organism has six pairs of chromosomes how many different gametes can it produce

Answers

Answer:

12

Explanation:

a man who is normal for color vision marries a woman who is colorblind. What is the probability of having a colorblind son? show punnett square

Answers

Answer:50%

Explanation:

    [tex]X^R[/tex]     Y

[tex]X^r[/tex] Rr       Xr Y

       [tex]X^r[/tex] Rr       Xr Y

Punnet square, colorblind woman would mean recessive traits on both chromosones, and his offspring is a man if the chromosones are XY, therfore we see that he has 100% chance of getting a colorblind son, but only a 2/4 chance of actually having a son. so it is 50%

what best explains the increase population of incects

Answers

The only way insects increase in population is by reproducing, just like humans do.

Which of the following did not occur during the Cenozoic era?
OA. The formation of the Himalayas
OB. An ice age
OC. Climate heating
D. Several periods of mass extinction
S

Answers

The rise of the dinosaurs
The answer for this problem is D

which symptom would most likely occur in an organism exposed to tetrodotoxin?

Answers

Tetrodotoxin interferes with the transmission of signals from nerves to muscles and causes an increasing paralysis of the muscles of the body.

as a child, alex was short for his age. but during his teenage years, his height increased and he surpassed most of his friends. What must have occurred to create his growth spurt?

Answers

During Alex's teenage years, his growth spurt was likely triggered by the onset of puberty. This is a natural process in which significant physical and hormonal changes occur, leading to rapid growth and development in adolescents.

Puberty is a stage of development characterized by various hormonal changes that impact physical growth and maturation. During puberty, the body undergoes significant transformations, including the growth of skeletal bones, muscle development, and changes in body composition.

These changes are primarily influenced by the release of hormones such as growth hormone and sex hormones (such as testosterone in males and estrogen in females).

In Alex's case, it is likely that his initial delay in growth during childhood was due to a slower or delayed onset of puberty compared to his peers. However, once he entered his teenage years and experienced the hormonal changes associated with puberty, his growth spurt occurred, allowing him to catch up and even surpass his friends in height.

It's important to note that the timing and extent of growth spurt can vary among individuals, influenced by genetic factors, overall health, and nutrition.

For more such answers on adolescents

https://brainly.com/question/29598902

#SPJ8

all women over age 50 (Women are four times more likely than men to develop osteoporosis.)
people with a small skeletal frame
Why do you think these groups have a high risk of osteoporosis?

Answers

These groups, women over the age of 50 and people with a small skeletal frame, have a higher risk of developing osteoporosis due to certain factors:

1. Hormonal Changes: Women experience a significant decrease in estrogen levels during menopause, which accelerates bone loss and increases their susceptibility to osteoporosis. Men, on the other hand, generally have higher peak bone mass and a slower rate of bone loss.

2. Aging Process: As individuals age, bone remodeling and the replacement of old bone tissue with new bone tissue slow down. This gradual decline in bone density increases the risk of osteoporosis.

3. Genetics and Body Frame: People with a smaller skeletal frame tend to have less bone mass overall, putting them at higher risk for osteoporosis. Bone density and structure can also be influenced by genetic factors.

4. Lifestyle Factors: Certain lifestyle choices can further contribute to the risk of osteoporosis. Lack of physical activity, inadequate calcium and vitamin D intake, smoking, excessive alcohol consumption, and a sedentary lifestyle can all negatively impact bone health.

An example of a reaction to a stimulus is
A. A boy smelling a flower
B. A person tapping on a friend’s shoulder
C. A loud clap of Thunder following lightning
D. Eyes blinking due to smoke in the air

Answers

Answer: an example of a stimulus is  D

Explanation:

since stimulus is basically reacting to anything, it has to be D since smoke can cause blinking eyes, meaning they respond to smoke with flashing. thats why  we shouldn't smoke ( i hope im correct and i hope this helps)

Classifying Properties
For each property listed, identify the type of element it describes.
Very good electrical conductivity:
Amphoteric, able to form acidic OR basic compounds:
Gaseous at room temperature:
Solid at room temperature:
Brittle:

Answers

For each property listed, identify the type of element it describes:

Very good electrical conductivity: Metal

Amphoteric, able to form acidic OR basic compounds: Metalloid

Gaseous at room temperature: Nonmetal

Solid at room temperature: Metal, Metalloid

Brittle: Nonmetal

In the properties listed, "Very good electrical conductivity" is associated with metals. Metals are known for their high electrical conductivity due to the presence of delocalized electrons that can easily move and carry electric charges.

"Amphoteric, able to form acidic OR basic compounds" describes metalloids. Metalloids exhibit properties of both metals and nonmetals, including the ability to form compounds that can be either acidic or basic.

"Gaseous at room temperature" is a characteristic of nonmetals. Nonmetals typically exist as gases at room temperature, such as oxygen, nitrogen, and chlorine.

"Solid at room temperature" can apply to both metals and metalloids. Most metals are solid at room temperature, while some metalloids, such as silicon and germanium, are also solid under normal conditions.

"Brittle" is a property associated with nonmetals. Nonmetals tend to be brittle, meaning they are easily broken or shattered when subjected to stress.

This is because the bonding between atoms in nonmetals is usually covalent and lacks the flexibility and strength of metallic bonding.

For more such answers on Amphoteric nature

https://brainly.com/question/9506161

#SPJ8

Why does increasing the number of action potentials that a muscle fiber generates over time increase the amount of force it produces?

a. Because it prevents the SR being able to reuptake calcium at all

b. Because the voltage allows myosin to keep cycling

c. Because it prevents the RyR channels from ever being able to close

d. Because it causes more calcium to be released from the SR than the amount of calcium the SR can reuptake

Answers

Increasing the number of action potentials that a muscle fiber generates over time increases the amount of force it produces because it causes more calcium to be released from the sarcoplasmic reticulum (SR) than the amount of calcium the SR can reuptake.

The correct option to this question is d.

Calcium is required for the process of muscle contraction. During a muscle contraction, an action potential is generated which spreads down the sarcolemma and into the T-tubules. The T-tubules stimulate the sarcoplasmic reticulum to release calcium ions. Calcium ions bind to troponin which causes tropomyosin to move away from the actin-binding site on the thin filament, allowing myosin to bind to actin.

ATP is used to detach myosin from actin and then re-energize the myosin head to enable it to bind to another actin molecule further along the thin filament. Increasing the number of action potentials means that more calcium is released into the sarcoplasm. This increases the amount of myosin that can bind to actin which causes the muscle fiber to contract with greater force.

In conclusion, increasing the number of action potentials that a muscle fiber generates over time increases the amount of force it produces because more calcium is available to enable myosin to bind to actin, allowing for a stronger muscle contraction.

For more questions on muscle fiber ,visit:

https://brainly.com/question/1370027

#SPJ8

Discuss in detail vaccine against microorganism particularily antiviral​

Answers

Answer:

Vaccines are substances made from components of virus, bacteria, parasites, or other microbes that are administered as a preventative measure to help protect people from infection with a particular microorganism. Vaccines help the immune system recognize and attack a particular organism, in this case, an antivirus, by introducing harmless versions of the microorganism into the body. After a vaccine is introduced, the immune system begins to build up an immunity to the specific virus, thus reducing or eliminating the risk of becoming infected.

The most common types of antiviral vaccines are made from inactivated virus particles (like the polio vaccine) or from weakened live virus particles (like the measles vaccine). Inactivated viruses are killed using heat, chemicals, or other methods, which render the virus unable to cause infection. The virus is then used to create the vaccine. Weakened live virus vaccines use live virus particles that have been altered so they cannot multiply and cause illness.

Once the vaccine is administered, it stimulates the body’s immune system to develop antibodies and remember the virus or infection. This enables the body to respond rapidly if encountered with the real virus, preventing infection and potential illness. Vaccines can be given in the form of a shot, orally, or by a nasal spray.

For antiviral vaccines, the goal is typically to prevent the transmission and spread of the virus, reduce severe illnesses, and mortality, decrease long-term disability, and prevent viral evolution that leads to drug resistance. It is also important to remember that not all viruses can be prevented with a vaccine. Vaccines are typically used to prevent infection from viruses or other pathogens that cause severe, long-term illnesses and death.

Explanation:

LUCOSE, AMINO ACID, CONSTI The end product of digestion of carbohydrate is Anything that we eat or drink is called The end product of digestion of protein is Result of taking huge amount of food Difficult in emptying the bowel​

Answers

The end product of digestion of carbohydrates is glucose. The term used to describe anything that we eat or drink is "nutrients." The end product of the digestion of proteins is amino acids. When a large amount of food is consumed, the result can be difficulty in emptying the bowel, also known as constipation.

Carbohydrates are macronutrients that are broken down during digestion into simpler sugars, such as glucose. Glucose is the primary source of energy for our cells and is used by the body for various functions. It can be readily absorbed into the bloodstream and transported to cells throughout the body.

The term "nutrients" refers to the components of food that provide nourishment and support various bodily functions. It encompasses carbohydrates, proteins, fats, vitamins, minerals, and water. Nutrients are essential for the growth, development, and maintenance of the body.

Proteins are macronutrients made up of amino acids. During digestion, proteins are broken down into their constituent amino acids, which are then absorbed into the bloodstream and utilized by cells for various purposes. Amino acids are essential for building and repairing tissues, producing enzymes and hormones, and supporting immune function.

Consuming a large amount of food can lead to a feeling of fullness and distension in the gastrointestinal tract. This can result in difficulties in emptying the bowel, leading to constipation.

Factors such as low fiber intake, inadequate hydration, and reduced physical activity can also contribute to constipation. It is important to maintain a balanced diet, drink plenty of water, and engage in regular physical activity to promote healthy digestion and bowel movements.

For more such answers on nutrients

https://brainly.com/question/30568687

#SPJ8

In a population of wolves, the birth rate is 4, the death rate is 3, immigration is 2, and emigration is 3. Calculate the population growth by filling in the formula below.

(
+
) – (
+
) =

Since the population growth is
,
the population is
.

Answers

Answer:

Since the population growth is 0, the population is unchanged.

Explanation:

To calculate the population growth using the given birth rate, death rate, immigration, and emigration, we can use the formula:

(Population growth) = (Birth rate + Immigration) - (Death rate + Emigration)

Given:

Birth rate = 4

Death rate = 3

Immigration = 2

Emigration = 3

Substituting these values into the formula, we have:

(Population growth) = (4 + 2) - (3 + 3)

= 6 - 6

= 0

Therefore, the population growth is 0. Since the population growth is 0, the population remains unchanged.

If the primary motor cortex neuron increases its action potential frequency (from something like 10 to 20 AP per second), which of the following would you expect to happen?


a. Slow twitch fibers to enter into a state of tetanus


b. Large alpha motor neurons would get to threshold while smaller alpha motor neurons would not


c. Larger alpha motor neurons to get to threshold along with smaller alpha motor neurons


d. A reduction in total force within the whole muscle


e. A reduction in the total number of alpha motor neurons recruited

Answers

If the primary motor cortex neuron increases its  action potential frequency (from something like 10 to 20 AP per second), larger alpha motor neurons would get to threshold along with smaller alpha motor neurons.

The correct option is c.

An alpha motor neuron (αMN) is a type of motoneuron that originates in the spinal cord's anterior horn and connects to extrafusal muscle fibers, causing contraction and voluntary movement. The firing rate of the alpha motor neuron determines the degree of muscle force. A single action potential from an alpha motor neuron elicits an electromyographic response (EMG) that reflects the summed action potentials of the underlying muscle fibers.

The increase in the frequency of action potentials from the primary motor cortex neuron would result in the activation of both smaller and larger alpha motor neurons. When smaller alpha motor neurons receive an action potential, they cause slow-twitch muscle fibers to contract.

On the other hand, when larger alpha motor neurons receive an action potential, they activate the fast-twitch muscle fibers. Therefore, the increase in action potential frequency from the primary motor cortex neuron will result in both small and large alpha motor neurons being activated, which will contract both slow-twitch and fast-twitch muscle fibers, respectively. Hence, larger alpha motor neurons would get to threshold along with smaller alpha motor neurons.

For more such questions on neuron ,visit

https://brainly.com/question/11538106

#SPJ8

Mona is making a model of the zebra mussels' habitat. She wants her
model to show how matter moves to and from the zebra mussel. The best
model for her to make is.
A. a producer group
B. a consumer group
C. an exchange
OD. a food chain
1 point

Answers

The best model for Mona to make in order to show how matter moves to and from the zebra mussel is Option D.  a food chain.

A food chain represents the flow of energy and matter through different organisms in an ecosystem. It shows the transfer of nutrients and energy as one organism consumes another.

In the case of zebra mussels, they are filter-feeding organisms that extract microscopic food particles, such as phytoplankton, from the water. These phytoplankton serve as the primary producers in the ecosystem, converting sunlight and nutrients into organic matter through photosynthesis. As zebra mussels consume the phytoplankton, they act as primary consumers.

The food chain would continue with secondary consumers, such as small fish or insects, that feed on the zebra mussels. Tertiary consumers, like larger fish or birds, may prey on the secondary consumers. Each step of the food chain represents the transfer of matter and energy from one organism to another.

By creating a model of a food chain, Mona can visually represent the flow of matter, specifically nutrients, to and from the zebra mussel. It demonstrates the interconnectedness of different organisms in an ecosystem and highlights the important role of zebra mussels as filter feeders in the aquatic food web. Therefore the correct option is D

Know more about food chain here:

https://brainly.com/question/16504883

#SPJ8

What causes different colors to appear in the sky?How did the lab activities help you answer the lesson question "How do the processes of conduction, convection, and radiation help distribute energy on Earth?" What did you learn from conducting this lab?

Answers

Different colors appear in the sky due to the scattering of sunlight.

Sunlight is composed of light waves of different wavelengths and colors. When light waves interact with gases and particles in the Earth's atmosphere, they scatter in different directions, leading to the appearance of different colors in the sky.For instance, during sunrise and sunset, the sky appears orange and red. This is because during these times, the sunlight has to pass through more of the Earth's atmosphere to reach our eyes. As a result, the shorter wavelengths like blue and green are scattered more, leaving the longer wavelengths of orange and red to reach our eyes.In another scenario, when the sky appears blue, it is because the blue wavelengths are scattered the most in the Earth's atmosphere due to the small size of air molecules. Hence, when sunlight interacts with the atmosphere, the blue color is the one that reaches our eyes.

Conduction, convection, and radiation are the three primary ways by which heat energy is distributed on Earth. These processes are responsible for regulating the Earth's temperature and creating the weather patterns that we observe. Lab activities are an excellent way to understand how these processes work. For instance, by conducting a simple convention lab experiment, students can learn about the transfer of heat energy through fluids.The lab helps to demonstrate how hot fluids move upward while cold fluids move downward, creating a circular flow.

By understanding the role of these processes, students can understand how energy is transferred from one place to another, leading to the distribution of heat on Earth. The lab also helps students to understand the real-world applications of these processes, such as how they impact the Earth's climate and weather patterns.

For more such questions on scattering , visit:

https://brainly.com/question/30586608

#SPJ8

Organic substances needed in small quantities to maintain growth and metabolism are called
A. Proteins
B. Vitamins
C. Minerals
D. Fats

Answers

Answer:

i think the anwser is B or C

Explanation: since a and d are both  vitamins  therefore there incorrect you dont need just both of them to main growth unless you want to earn muscles  but with a lot of vitamins you can maintain growth in many different ways i hope im correct

I need help putting these in order!

Answers

Based on the information provided, the order in which the events described took place is E, A, B, C, F, D.

How did Earth and life formation occur?

In this sequence of events, Earth was formed first, this occurred as Earth cold down and therefore it became solid. Despite this, the existing atmosphere was different than the one we have now as it was rich in carbon dioxide, this led to oceans that were rich in the same component.

Due to this, the first life forms relied on carbon dioxide and release oxygen, which later led to an increase in the oxygen levels and different life forms.

Learn more about Earth on https://brainly.com/question/31064851

#SPJ1

Which timeline shows the correct order of contributions made to the discovery of DNAA scientist has a tomato plant with red-skinned tomatoes. It has one allele for red skin (R) and one for yellow skin (r).

Which describes the phenotype of the tomato plant?

red skin
yellow skin
homozygous
heterozygous

Answers

The correct order of contributions to the discovery of DNA is Friedrich Miescher, Phoebus Levene, Frederick Griffith, Avery, MacLeod, and McCarty, Erwin Chargaff, Rosalind Franklin and Maurice Wilkins, and James Watson and Francis Crick.

Regarding the tomato plant phenotype, if the plant has one allele for red skin (R) and one allele for yellow skin (r), the correct description for its phenotype would be heterozygous.

The correct answer would be heterozygous.

The correct order of contributions to the discovery of DNA can be represented by the following timeline:

1. Friedrich Miescher (1869): Miescher discovered a substance in the nucleus of cells, which he called "nuclein." This substance was later identified as DNA.

2. Phoebus Levene (1919-1929): Levene made significant contributions to understanding the chemical composition of DNA. He identified the components of DNA, including nucleotides and the sugar-phosphate backbone.

3. Frederick Griffith (1928): Griffith conducted an experiment with Streptococcus pneumoniae bacteria, demonstrating the concept of transformation. He observed that harmless bacteria could acquire the ability to cause disease by incorporating genetic material from other bacteria.

4. Avery, MacLeod, and McCarty (1944): Building on Griffith's work, this group of scientists identified DNA as the substance responsible for the transformation observed in bacteria. Their experiments provided strong evidence that DNA carries genetic information.

5. Erwin Chargaff (1949): Chargaff discovered that the amount of adenine (A) in DNA is equal to the amount of thymine (T), and the amount of cytosine (C) is equal to the amount of guanine (G). This finding became known as Chargaff's rules.

6. Rosalind Franklin and Maurice Wilkins (1952): Franklin and Wilkins used X-ray crystallography to obtain images of DNA's structure, including the famous "Photo 51" taken by Franklin. These images provided critical insights into DNA's helical structure.

7. James Watson and Francis Crick (1953): Watson and Crick, building on the work of others, proposed the double helix structure of DNA. They combined data from various sources to create a model that explained how DNA stores and transmits genetic information.

Regarding the tomato plant phenotype, if the plant has one allele for red skin (R) and one allele for yellow skin (r), the correct description for its phenotype would be heterozygous. The phenotype refers to the observable physical traits of an organism, and in this case, the presence of both red and yellow skin alleles results in a mixed phenotype with red skin being dominant over yellow skin. Therefore, the plant will exhibit red skin as its phenotype.

For more such information on: DNA

https://brainly.com/question/28406985

#SPJ8

Which one is wild Animals A. Tiger B. Fox c, Cat D. caw

Answers

Answer:

Explanation:

most animals living in forest are wild animals.tiger being one of them.

The Zika virus infects and harms humans while the virus itself thrives.

Which of the following best describes the type of relationship that exists between the Zika virus and humans?

Zika Virus Transmission

Zika virus is transmitted to people primarily through the bite of an infected Aedes species mosquito (Ae. aegypti and Ae. albopictus). These are the same mosquitoes that spread dengue and chikungunya viruses. These mosquitoes typically lay eggs in and near standing water in things like buckets, bowls, animal dishes, flower pots and vases. They prefer to bite people, and live indoors and outdoors near people. Mosquitoes that spread chikungunya, dengue, and Zika bite during the day and night. Mosquitoes become infected when they feed on a person already infected with the virus. Infected mosquitoes can then spread the virus to other people through bites.

Answers

The relationship between the Zika virus and humans is parasitic, as the virus infects and harms humans while utilizing them as hosts for its replication and spread. The transmission of the virus through mosquitoes ensures its survival and persistence in the population, while humans experience the detrimental effects of the infection.

The relationship between the Zika virus and humans can be described as a parasitic relationship. The Zika virus infects and harms humans, causing a range of symptoms and health complications. It takes advantage of human hosts to replicate and spread, while humans suffer the detrimental effects of the infection.

The Zika virus is primarily transmitted to humans through the bite of infected Aedes species mosquitoes, particularly Aedes aegypti and Aedes albopictus. These mosquitoes act as vectors, carrying the virus and transmitting it to humans when they bite. The virus uses the mosquitoes as a means of transportation to reach new hosts.

Once inside the human body, the Zika virus can cause various symptoms, including fever, rash, joint pain, conjunctivitis, and muscle pain. In some cases, it can lead to more severe outcomes, such as Guillain-Barré syndrome and birth defects in babies born to infected mothers, including microcephaly.

The Zika virus benefits from infecting humans as it can reproduce and spread within the human population. The virus can multiply in various tissues and fluids, including the blood, saliva, and reproductive organs. When infected mosquitoes bite humans, they acquire the virus and continue the transmission cycle by infecting other individuals.

For more such information on: Zika virus

https://brainly.com/question/26552940

#SPJ8

Mutations can be categorized based on the kind of effect they have on an organism. Blue eyes in humans are a result of a mutation in the OCA2 gene, which controls the production of pigment melanin in the iris.

This mutation is an example of a
mutation. Such mutations have
effect on an organism’s survival.

Answers

The mutation in the [tex]OCA_2[/tex]gene that causes blue eyes in humans is an example of a non-lethal mutation. Such mutations have a neutral or insignificant effect on an organism's survival and do not significantly impact its ability to reproduce and pass on the mutation to future generations.

The mutation in the [tex]OCA_2[/tex] gene that leads to blue eyes in humans is an example of a non-lethal mutation. This specific mutation affects the production of melanin, the pigment responsible for the coloration of the iris. Individuals with this mutation have reduced melanin production, resulting in lighter eye color.

Mutations can be categorized based on their effects on an organism. Lethal mutations cause severe impairments that prevent the organism from surviving. These mutations are typically incompatible with life and often result in spontaneous abortion, stillbirth, or early death after birth. Examples of lethal mutations include those affecting vital organs or crucial developmental processes.

In contrast, non-lethal mutations have a neutral or insignificant effect on an organism's survival. These mutations may result in variations in physical traits, such as eye color, hair color, or height, but do not significantly impact the organism's ability to survive and reproduce. Non-lethal mutations often do not confer a selective advantage or disadvantage, and their occurrence is driven by genetic variation and chance.

The mutation in the [tex]OCA_2[/tex] gene that causes blue eyes is considered a non-lethal mutation because it does not adversely affect an individual's ability to survive and reproduce. While eye color may vary, it does not impact overall fitness or reproductive success. Therefore, individuals with blue eyes can thrive and pass on the mutation to future generations without any significant hindrance.

It is important to note that the categorization of mutations as lethal or non-lethal can vary depending on the specific context and species. Mutations that are non-lethal in one species may have different effects in another. Additionally, the impact of a mutation on an organism's survival and reproductive success can be influenced by environmental factors and genetic interactions.

In summary, the mutation in the [tex]OCA_2[/tex] gene that leads to blue eyes in humans is an example of a non-lethal mutation. Such mutations have a neutral or insignificant effect on an organism's survival and do not significantly impact its ability to reproduce and pass on the mutation to future generations.

For more such information on: mutation

https://brainly.com/question/30618074

#SPJ8

Which level of organization is identified by X?
A cell
B tissue
c) organ
Dorgan system

Answers

The level of organization identified by X is option B. tissue.

Tissue is a group of similar cells performing a common function. Tissue is the second level of organization in living things after cells. Tissue can be described as an aggregation of cells of similar structure and function which together perform specific functions. The cells in tissues are held together by a common extra-cellular matrix composed of polysaccharides, proteins, and minerals.

There are four types of tissue present in the human body and they are: epithelial tissue, connective tissue, muscle tissue, and nervous tissue. Epithelial tissue covers the surfaces of organs, lines cavities and lumen and forms glands. Connective tissue supports and connects organs and tissues and includes cartilage, bone, adipose tissue, and blood.

Muscle tissue is responsible for movement and includes smooth, skeletal, and cardiac muscle. Nervous tissue is responsible for transmitting signals and includes neurons and glial cells. Therefore, the level of organization identified by X is tissue. Therefore the correct option is B

Know more about tissue here:

https://brainly.com/question/29198358

#SPJ8

Other Questions
You and four coworkers are assigned an important project due to the COO at the end of the quarter. This project will launch a new product that the organization has made a large investment in terms of employee hours, financial assets, and its future in the industry. Your team is responsible for the development of the marketing and distribution strategy for the new product, which is a critical piece of the new products and the companys success. You were appointed as the lead for this team that has 90 days to launch the product. As the team lead you must develop the plan, secure resources needed to complete the project from the COO, and ensure the final plan will be implemented at the launch date. As a team, the four of you agreed on the distribution of work and to meet every Monday, Wednesday, and Friday between 9 to 10:30 to report on the progress of the project, complete tasks associated with the project, and troubleshoot issues that come up. This project requires close coordination and reliance on your team members to complete. The first two weeks are going very well, and you and the team are on schedule. After the end of the third week, one of your team members indicates she is too busy to attend all of the meetings due to their current workload, but she promises she will get their work done by the deadline and send written reports to the team members before the meetings. Your frustration and your other team members' frustration is growing and there is a legitimate fear that your team will not meet the goal of having the plan ready for launch. Your reputation as a professional and manager, as well as all of the team members, could be negatively impacted, and the consequence for the company can be highly detrimental. This project must be successful. You are aware the team member who stated they are too busy to attend the meetings has a challenging job within the organization. You see her come to work at 7 a.m. and you are told by others she often puts in 12-hour days. Within the unit she manages, there are 2 employees who are difficult employees. They are very vocal about their dissatisfaction with the organization, their supervisor, and the workload. You also learned this team member is facing several personal issues as well. She has a child who has had a series of operations to correct a medical condition that can be life-threatening and will need at least two more in the coming year. In terms of the organization, the company expects leaders to create a supportive environment for all employees and to help employees to grow and be successful. Historically your organization was one of the last in your industry to place women in leadership roles and several years ago, there were multiple cases of sexual harassment and a hostile environment for women and people of color. The organization has been proactive in addressing these issues and has a no-tolerance policy towards people who violate rules governing harassment and hostility towards co-workers. Using your personal ethics statement as a guide, how do you handle this situation? Provide details on the steps you will take in addressing this issue and related this to your personal ethics statement. Be very specific about what you will say to the team member and to the team as a whole about the situation and the actions you have taken. Rationalizing a demand function I. Consider the demand function for which the consumer spends her entire wealth on the two goods and the ratio of the amount spent on good 1 to the amount spent on good 2 is p2/P1. Show that the preference relation represented by the utility function x1+ x2 rationalizes this demand function. For each metal/alloy below, discuss the feasibility of hot working or cold working based on melting temperature, corrosion resistance, elastic limit, and degree of fragility:1. tin2. Tungsten3. Al Assume that adults have IQ scores that are normaly distributed with a mean of 95.9 and a standard deviation 16.4. Find the first quartife Q1which is the IQ 5 core separating the bottom 25% from the top 75%. (Hint: Draw a graph.) The first quartite is_________ The incident continues to reverberate through American politics, but its repercussions extend beyond the country. It also had a major impact internationally, marking a marked decline in the global power and influence of the United States Consider a system with input r(t) and output y(t) such that y(t) = x(t) +tx(t (10-a)). Determine whether this system is linear and whether it is time-invariant. Write code for the above GUI in JavaAvoid copy pasting.www. wwww Transfer Money Back Enter Pin Enter Account No. Enter Amount Transfer You have a startup company that is not particularly well known. Your annual sales at the end of year 1 are $100,000. Due to hard work, however, you expect that your sales will grow by 25% every year. What type of cash flow is this? Irregular Series Gradient Series Geometric Series Uniform Series A pair of 80-N forces is applied to the handles of the small eyelet squeezer. The block at A slides with negligible friction in a slot machined in the lower part of the tool. www.E (a) Neglect the small force of the light return spring AE and determine the compressive force P applied to the eyelet. 6.25 mm 80 N (b) If the compressive force P is to be doubled, what forces should be applied to the handles? Is there a linear relationship between input and output forces. If so, express this relationship. (c) Calculate the shear force and bending moment in member ABC at the section which is midway between points A and B. 62.5 mm 80 N 50 mm c 15 mm D. 13. What is the purpose of the recarbonation (CO addition) step in an excess-lime softening process? A) decrease the required lime dose B) increase removal of magnesium C) increase removal of NOM (natural organic matter) D) neutralize excess lime and lower pH E) increase the settleability of the solids 14. Oxidation of iron and manganese by chemical oxidants is faster at pH. A) higher (more basic) B) lower (more acidic) 15. What is the limiting design (worst case scenario) for gas stripping? A) the warmest temperature B) the coldest temperature C) it depends on the specific gas and the stripping technology being used 16. Which of the following will lead to less head loss in a granular media filter? A) decreased media effective size (dio) B) increased filtration velocity (VF) C) increased fixed bed porosity (EF) D) increased media length (L) E) colder temperature 17. The IPENZ Code of Ethical Conduct says that engineering activities must have regard to the need for sustainable management of the environment. A) true B) false 18. Chlorine gas dissolves in water and then undergoes aqueous reactions: Cl2(g) Cl2(aq) + HO HOCI+ CI+ + H+ When you dissolve Cl gas into water, what happens to the pH? A) pH increases (more basic) B) pH decreases (more acidic) 19. When a granular media filter is backwashed, the expanded bed porosity (EE) should be the fixed bed porosity (EF). A) less than B) greater than C) equal to20. The goal of the lime softening process is to remove as much hardness as possible from the drinking water source. A) true B) false Communication 4. Explain how the concepts of transformations can be used to identify or confirm exuivalent trigonometric expressions? You may use sine and cosine as an example of transformation. [4] 3. Emotions help to form relationship with their partner and help them to remember memories they have together and share it with their children. Describe the operation of each functional block in the Cathode Ray Oscilloscope and Regulated Power Supply Lost Generation writers, such as Gertrude Stein and F. Scott Fitzgerald, were influenced by:____.a. the rejection of traditional White American ideas. b. the rise of the Cold War in the United States. c. the stock market crash of 1929. d. the rearmament before World War II. STORY OF " BRIGHT LIGHTS BY LYSTRA ARANAL"QUESTIONS:-Character Analysis:Does the main character represent a section of society or a certain type of person? Explain briefly.-Plot Analysis:What types of conflict is present in the story?-Symbolism:What does bright lights symbolize?-Theme:Elaborate one theme evident in the story.-Moral Lesson:Pick one line from the story that illustrates its moral lesson. Explain briefly. The federal government has the power to Assume that the bandwidth required to transmit a signal equals the number of binary digits (bits) per second in the sampled and quantized message, i.e. RNZ coding. Find the bandwidth required to transmit a speech message (0.3 to 4 kHz) with a signal-to-quantizing noise ratio of 30 dB. (5 points) A ventilation system is installed in a factory, of 40000m space, which needs 10 fans to convey air axially via ductwork. Initially, 5.5 air changes an hour is needed to remove waste heat generated by machinery. Later additional machines are added and the required number of air changes per hour increases to 6.5 to maintain the desired air temperature. Given the initial system air flow rate of 200500 m/hr, power of 5kW/fan at a pressure loss of 40Pa due to ductwork and the rotational speed of the fan of 1000rpm. (a) Give the assumption(s) of fan law. (b) Suggest and explain one type of fan suitable for the required purpose. (c) New rotational speed of fan to provide the increase of flow rate. (d) New pressure of fan for the additional air flow. (e) Determine the total additional power consumption for the fans. (5%) (10%) (10%) (10%) (10%) (f) Comment on the effectiveness of the fans by considering the airflow increase against power increase. (5%) Design the HV and LV power distribution system for the specified industrial plant. Try to consider all details for the HV and LV levels. (20 pts.) It is a plastic materials manufacturing plant. Plant is supplied from 34.5 KV distribution system. An underground cable is coming to the 34.5 KV distribution center of the plant. There are two 1250 KVA transformers feeding LV loads. Low voltage loads are as follows:o 600 kW crashero 600 kW crashero 500 kW extrudero 200 kW compressoro 100 KW officeso 100 kW pump motoro 100 kW other loads A 400 V backup generator of 1000 KVA is also available for emergency cases. Also consider the reactive power compensation system . Average pf of loads is 0,8. phrase and class in following:In the quite forest