Fruit fly thorax lengths fruit flies are used frequently in genetic research because of their quick reproductive cycle. the length of the thorax (in millimeters) was measured for each fly in a random sample of 49 male fruit flies. the mean length was a=0.8004 mm, with a standard deviation of 8 = 0.0782 mm. a. construct and interpret a 90% confidence interval for the true mean thorax length of a male fruit fly.

The most general antiderivative of the function g(v) = 5 cos(v) - 8/√(1-v^2) is 5 sin(v) + 8 arcsin(v) + C, where C is the constant of the antiderivative.

To find the antiderivative of the given function g(v), we can use the basic antiderivative rules. The antiderivative of 5 cos(v) is 5 sin(v), as the derivative of sin(v) is cos(v) and we only need to reverse the process.

Similarly, the antiderivative of -8/√(1-v^2) can be found using the inverse trigonometric function arcsin(v), as its derivative is -1/√(1-v^2). However, we need to include a constant of integration, denoted by C, as the antiderivative is not unique.

So the most general antiderivative of g(v) is 5 sin(v) + 8 arcsin(v) + C, where C represents the constant of the antiderivative. To check the correctness of the answer, we can differentiate it and verify if it gives us the original function g(v) as the result.

For more questions like Derivative click the link below:

https://brainly.com/question/25324584

#SPJ11

The amount of paint that he will need to paint all six surfaces of the sandbox is: 68 square feet

Since the image is a rectangular prism

The volume of the box can be obtained by using the formula:

Volume = l * b * h

The box has a dimension of 1ft x 4ft x 6ft

The volume of the box = 1 x 4 x 6 = 24 cubic feet

Therefore, the volume of sand needed to fill the box will be = 24 cubic feet of sand

The surface area of the box can be obtained using the formula:

2(lb + lh + bh)

= 2(1*4 + 1*6 + 4*6)

=2(4 + 6 + 24)

=2 (34)

= 68 square feet

Therefore a total surface area of 68 square feet needs to be painted

Read more about Volume of box at: https://brainly.com/question/463363

#SPJ1

Complete question is:

Your cousin is building a Sandbox for his daughter how much sand will he need to fill the Box? Explain. How much paint will he need to paint all six surface of the sandbox? Explain. 1ft 4ft 6ft not answer choices

The equation which most accurately represents the word problem,  is (b) 68 = 2L + 2(9).

The word problem states that the perimeter of a rectangle is 68 inches, and the perimeter equals twice the length (L) plus twice the width (9). We can represent this relationship by using the equation as :

We know that, the perimeter of rectangle is : 2(length + width),

Substituting the value,

We get,

⇒ 68 = 2(L + 9);

⇒ 68 = 2L + 2(9); and this statement is represented by Option(b).

Therefore, the correct equation is (b) 68 = 2L + 2(9).

Learn more about Equation here

https://brainly.com/question/1681271

#SPJ1

The given question is incomplete, the complete question is

Select the equation that most accurately depicts the word problem.

"The perimeter of a rectangle is 68 inches. The perimeter equals twice the length of L inches, plus twice the width of 9 inches".

(a) 68 = 9(L + 2)

(b) 68 = 2L + 2(9)

(c) 68 = 2(L - 9)

(d) 68 = 9L + 2

(e) 68 = 2/L + 2/9

(f) 68 = L/2 + 2(9)

The serum be said to be effective can't be concluded, since the test statistic is less than the critical value, we fail to reject the null hypothesis.

Let [tex]n_A[/tex] denotes the number of mice which receiving treatment. Therefore,

[tex]n_A[/tex] = 5,

Let [tex]n_B[/tex] denotes the number of mice which do not receive treatment. Therefore, [tex]n_B[/tex] = 4

Survival times for the mice receiving the treatment are: 2.1; 5.3; 1.4; 4.6; 0.9

Survival times for the mice not receiving the treatment are: 1.9; 0.5; 2.8; 3.1

Let [tex]x_A[/tex] be the mean of survival time for the mice receiving the treatment and [tex]x_B[/tex] be the mean of survival time for the mice not receiving the treatment.

We have: [tex]x_A[/tex] = 2.86

[tex]x_B[/tex] = 2.075

Standard deviation be:

[tex]S_A=\sqrt{\frac{\sum (x_a-x_A)^2}{n_A-1} }[/tex]

[tex]=\sqrt{\frac{[(2.1-2.86)^2+(5.3-2.86)^2+(1.4-2.86)^2+(4.6-2.86)^2+(0.9-2.86)^2]}{4} }[/tex]

= 1.971

[tex]S_B=\sqrt{\frac{\sum (x_b-x_B)^2}{n_B-1} }[/tex]

[tex]=\sqrt{\frac{[(1.9-2.08)^2+(0.5-2.08)^2+(2.8-2.08)^2+(3.1-2.08)^2]}{3} }[/tex]

= 1.167

[tex]\mu_A[/tex] and [tex]\mu_B[/tex]  are population means for the groups receiving the treatment and not receiving the treatment respectively.

Level of significance is α = 0.05

If P-value is less then 0.05, we will reject [tex]H_o[/tex]

The test statistic is,

[tex]t=\frac{(x_A-x_B)-(\mu_A-\mu_B)}{s_p\sqrt{\frac{1}{n1} +\frac{1}{n2} } }[/tex]

[tex]=\frac{2.86-2.07)-(0)}{1.674388\sqrt{\frac{1}{5} +\frac{1}4} } }[/tex]

= 0.79/1.123

t = 0.70

Degrees of freedom is,

[tex]d_f=n_A+n_B-2[/tex]

= 5 + 4 - 2

= 7.

According to the value in the table, the test's critical value is 1.895.

We are unable to reject the null hypothesis since the test statistic is less than the threshold value.

We thus cannot draw the conclusion that the serum is working.

Learn more about the Test statistics:

https://brainly.com/question/15980493

#SPJ4

Answer:

0.16 gallons of paint

the number lies between 0 and 1

Step-by-step explanation:

Chairs and tables used the same amount of paint,

20x + 5x = 4

25x = 4

x = 0.16

So, each piece of furniture will use 0.16 gallons of paint.

To apply the pigeonhole principle, we need to determine the number of pigeonholes and the number of pigeons. The pigeonhole principle cannot be applied to this question.

In this case, the"  holes" are the high minidresses and the" lockers" are the ranges of  particular records. Let's assume that the range of  particular records is from 6  bases( 72  elevation) to 7  bases( 84  elevation).   The difference between the upper and lower bounds of the range is

84- 72 =  12  elevation.

We can divide this range into five subintervals of length2.4  elevation( 72,74.4),(74.4,76.8),(76.8,79.2),(79.2,81.6), and(81.6, 84).  

Since there are only five subintervals, but we've three high minidresses, it isn't  inescapably true that two of the  platoon members must have  particular records that are within four  elevation of each other. For  illustration, if the three high minidresses have  particular records of 6  bases 3  elevation( 75  elevation), 6  bases 7  elevation( 79  elevation), and 7  bases( 84  elevation),  also none of them have  particular records within four  elevation of each other.

Learn more about  pigeonhole principle at

https://brainly.com/question/29242775

#SPJ4

The product of 2-4i and 3 is represented on the complex plane as a vector with magnitude 6√5 and angle -63.43 degrees, starting from the origin.

To represent the product of a complex number and a real number on the complex plane:

We multiply the real part and the imaginary part of the complex number by the real number.

The magnitude (or length) of the resulting complex number is multiplied by the absolute value of the real number.

The angle (or argument) of the resulting complex number is the same as the angle of the original complex number.

For the product of 2−4i and 3:

We multiply the real part (2) and the imaginary part (-4i) of the complex number by the real number (3), to get:

3(2) + 3(-4i) = 6 - 12i

The magnitude of the resulting complex number is:

|6 - 12i| = √(6² + (-12)²) = √180 = 6√5

The angle of the resulting complex number is the same as the angle of the original complex number (2-4i), which can be found using the inverse tangent function:

tanθ = (imaginary part) / (real part) = (-4) / 2 = -2

θ = atan(-2) ≈ -1.107 radians or ≈ -63.43 degrees

Therefore, the product of 2-4i and 3 is represented on the complex plane as a vector with magnitude 6√5 and angle -63.43 degrees, starting from the origin.

To know more about complex number refer here:

https://brainly.com/question/20566728

#SPJ11

The pool is draining at a rate of 1.36% per hour according to Inayah's claim.

According to Inayah's claim, the pool is experiencing a draining at a rate of 1.36% per hour. This means that for every hour that passes, the pool's water level decreases by 1.36% of its total volume.

Understanding the rate at which a pool is draining is essential for monitoring and managing water levels. If the rate of drainage is accurate, it can help estimate how long it would take for the pool to reach a certain level or completely drain. Additionally, it aids in determining the necessary actions to maintain the pool's water balance and prevent potential issues such as overflow or inadequate water supply.

It is crucial to verify the accuracy of the claim by monitoring the pool's water level over a specific period. This can be done by measuring the change in water volume or using other reliable methods to ensure the drainage rate aligns with the claimed percentage.

Learn more about draining at a rate

brainly.com/question/18011570

#SPJ11

Answer:

A

Step-by-step explanation:

6x4 = 24

6x5 = 30

24+30

:)

Answer:

A.) 6(4+5)

Step-by-step explanation:

*Solve the parenthesis first: 4+5 = 9

*Next, multiply 6×9= 54

Under the federal list, the total amount of exemptions that Jerry would be allowed is $27,900.

Under the state list, the total amount of exemptions that Jerry would be allowed is $37,500.

Under the federal list, Jerry's exemptions can only be be:

Equity in home:                     $15,000

Motor vehicle:                        $2,400

Household goods:                  $8,000

Tools (for debtor’s trade):       $1,500

Total exemptions              =   $27,900

Under the state list, Jerry's exemptions can only be be

Equity in home:                               $25,000

Motor vehicle:                                $1,500

Household goods:                          $6,000

Tools:                                               $5,000

Total exemptions =                       $37,500

Based on the above, the state list can be more favorable for Jerry as it will give him  a lot of exemption a higher total value of assets.

Learn more about exemptions  from

https://brainly.com/question/2170674

#SPJ1

See full question below

Computing Exemptions Under Chapter 7 Bankruptcy

Assume the current federal bankruptcy exemptions are listed at the left, and the state exemptions are

listed at the right. The debtor may use the exemption table that best benefits him or her. For the two

circumstances shown below, compute the exemption amounts and decide which will be better for the

debtor—the federal list or the state list.

LIST A. FEDERAL EXEMPTIONS

Equity in home .......................................$15,000

Motor vehicle .............................................2,400

Household goods .......................................8,000

($400 limit for a single item)

Jewelry .......................................................1,000

Other property ..............................................800

Tools (for debtor’s trade) ...........................1,500

LIST B. STATE EXEMPTIONS

Equity in home ....................................... $25,000

Motor vehicle ............................................. 1,500

Household goods ..................................... 10,000

($1,000 limit for a single item)

Jewelry .......................................................... 500

Other property .............................................. 100

Tools ........................................................... 5,000

1. Jerry has the following assets: a house with equity of $15,000, a car with equity of $2,500, and household goods worth $6,000 (no single item over $400). He also has tools worth $5,800 that he needs for his business. What is the total amount of exemptions Jerry would be allowed using the federal list? The state list? Which list will be more favorable for him? SHOW YOUR WORK!

When a multiple regression model created incorrectly then leaves out one and more than one important factors are omitted.

Multiple regression is a statistical way that can be used to analyze the relationship between a single dependent variable and several independent variables. Equation is written as y =

We have regressors x₁ and x₂ where both variables are determinants of the dependent variable. you first regressor y on x₁ only and find no relationship. however when regressing y on x₁ and x₂.

For more information about multiple regression model, visit:

https://brainly.com/question/28167705

#SPJ4

Complete question:

consider the multiple regression model with two regressors x1 and x2, where both variables are determinants of the dependent variable. you first regress y on x1 only and find no relationship. however when regressing y on x1 and x2, the slope coefficient changes by a large amount. this suggests that your first regression suffers from:

A graph that shows a line on the scatter plot that fits the data include the following: B. scatter plot with points at 1 comma 2, 2 comma 3, 3 comma 2, 4 comma 5, 5 comma 3, 5 comma 6, 6 comma 4, and 8 comma 4, with a line passing through the coordinates 1 comma 2 and 8 comma 4.

In Mathematics and Geometry, there are different characteristics that are used for determining the line of best fit on a scatter plot and these include the following:

By critically observing the scatter plot using the aforementioned characteristics, we can reasonably and logically deduce that line B represents the line of best fit because the data points are in a linear pattern.

Read more on line of best fit here: brainly.com/question/12284501

#SPJ1

Answer: 26/100   OR     0.26  (I would put the answer as a fraction)

Step-by-step explanation:

We need both fractions to have the same denominator before we add them. The denominator of 6/100 is 100. The denominator of 2/10 is 10. We need to turn 10 into 100. To do that, we can do 10*10. This gives us 100. However what we do to the bottom must be done to the top therefore we have 20/100 + 6/100

Now the two fractions can be added together. 20/100 + 6/100 = 26/100.

Normally we would simplify this down to 13/50 but if you want it unsimplified 26/100 would be your answer.

This situation represents exponential decay because the depth of the lake decreases over time.

Exponential decay is a mathematical term used to describe the process of decreasing over time at a constant rate where the amount decreases by a constant percentage at regular intervals. It is a type of exponential function where the base is less than 1.

In other words, the quantity is decreasing by a fixed percentage at regular intervals.

The rate of decay, r, is equal to 0.98 because the depth decreases by 2% per year.

So the depth of the lake each year is 0.98 times the depth in the previous year. It will take between 5 and 6 years for the depth of the lake to reach 26.7 meters.

To know more about exponential decay refer here:

https://brainly.com/question/17161065?referrer=searchResults

#SPJ11

Therefore, when you solve this expression (6 + 5) x 2^2 - 4 , the solution is 23.

Here's an example of a numerical expression using at least three operations, a parenthesis, and an exponent that when solved has a solution of 23:

(6 + 5) x 2^2 - 4 = 23

Explanation:

- Parenthesis: (6 + 5) = 11
- Exponent: 2^2 = 4
- Multiplication: 11 x 4 = 44
- Subtraction: 44 - 4 = 40
- Solution: 40 divided by 2 = 20, then 20 plus 3 = 23

Therefore, when you solve this expression, the solution is 23.
Learn more about expression,

https://brainly.com/question/723406

#SPJ11

From the word problem given, it will take Grace 0.05 hours and Kelly 4.05 to complete the task

To solve this problem, we need to write an equation for the word problem.

Let x = time it takes for Kelly

let y = time it takes for Grace

From the problem;

y = x - 4 ...eq(i)

Since they can complete the work in 20 hours;

1/x + 1/y = 20 ...eq(ii)

Solving for both equations

From equ(ii)

1/x + 1/(x - 4) = 20

Solving for x;

x = 4.05 or x = 0.049

Put the value in and solve for y

y = x - 4

y = 4.05 - 4 = 0.05 or y = 0.0049 - 4 = insignificant

The value of y = 0.5 hours

Learn more on word problem here;

https://brainly.com/question/13818690

#SPJ1

a. The two companies charge the same for 14 tons of sugar.

b. The cost when the two companies charge the same is $7953.50.

a. Let's represent the amount of sugar as x, and the total cost as C. Then we can set up the following equations for each company:

Company 1: C = 5143 + 200.75x

Company 2: C = 5500 + 175.25x

To find the amount of sugar for which the two companies charge the same, we can set the two equations equal to each other and solve for x:

5143 + 200.75x = 5500 + 175.25x

25.5x = 357

x = 14

So the two companies charge the same for 14 tons of sugar.

b. To find the cost when the two companies charge the same, we can plug in x = 14 into either equation. Let's use Company 1's equation:

C = 5143 + 200.75x

C = 5143 + 200.75(14)

C = 5143 + 2810.50

C = 7953.50

Therefore, the cost when the two companies charge the same is $7953.50.

To know more about cost, refer to the link below:

https://brainly.com/question/28802397#

#SPJ11

Step-by-step explanation:

Looks as though it has been cropped.....picture is only a PART of the original...it has been 'cut off'  or 'cropped' on both sides .

Answer:

The present ages of A and B will be 48 and 18 years.

Step-by-step explanation:

Let the coefficient be x.

A's age = 8x

B's age = 3x

Six years hence,

Ages will be 8x+6 and 3x+6.

Now, As per the question,

(8x+6) /(3x+6) = 9/4

32x+24 = 27x+54

5x = 30

x = 6.

The solution to the  Linear equation is x = 1.5.

The math equation for the given problem is 15 - x = 7x + 3.

To solve this equation, first simplify it by combining like terms on one side of the equation.

15 - x - 7x = 3

Next, combine like terms on the left side of the equation.

15 - 8x = 3

Now, isolate the variable by subtracting 15 from both sides of the equation.

-8x = -12

Finally, solve for x by dividing both sides by -8.

x = 1.5

Therefore, the solution to the equation is x = 1.5.

To summarize, the linear equation 15 - x = 7x + 3, we simplify it by combining like terms. Subtracting x and 7x from both sides gives us 15 - 8x = 3. Next, we isolate the variable by subtracting 15 from both sides, resulting in -8x = -12.

Finally, we solve for x by dividing both sides by -8, giving us x = 1.5. This means that when we substitute x with 1.5 in the original equation, both sides will be equal. The solution x = 1.5 satisfies the equation and represents the value at which the equation is true.

To learn more about Linear equation go to :

https://brainly.com/question/11897796#

#SPJ11

The quantity that gives maximum profit is 1,750 units.

To find the quantity that gives maximum profit, we first need to determine the profit function.

Profit = Total Revenue - Total Cost

Total Revenue is given by the price (p) times the quantity (q):

TR = pq

Since the corporation has monopolistic control, it can set the price to maximize profit. We can use the demand function

to find the price that will maximize profit:

Q = 180,000 - 50p

Solving for p, we get:

p = 3,600 - 0.02Q

Now we can substitute this into the profit equation:

Profit =[tex](3,600 - 0.02Q)Q - (900 + 100Q + Q^2)[/tex]

Simplifying:

Profit = [tex]-Q^2 + 3,500Q - 900[/tex]

To find the quantity that gives maximum profit, we can take the derivative of the profit function with respect to Q and

set it equal to zero:

[tex]d/dQ (-Q^2 + 3,500Q - 900) = 0[/tex]

-2Q + 3,500 = 0

Q = 1,750

for such more question on  maximum profit

https://brainly.com/question/11251879

#SPJ11

Answer:

the answer is D

Step-by-step explanation:

Answer:

C. x = 2 1/3, y = 1 1/3.

Step-by-step explanation:

To solve this question, we need to plot the two equations on the graph and see where they cross. The graph below shows the two lines in different colors:

The area of the square is 16 square units.

The area of the rhombus is 24 square units.

Part 1: Using the distance formula, we can find the lengths of the diagonals:

Diagonal AC = √[tex][(7-1)^2 + (2-10)^2[/tex]] = √(36 + 64) = √100 = 10

Diagonal BD = √[[tex](12-(-4))^2 + (12-0)^2[/tex]] = √(256 + 144) = √400 = 20

Part 2: The area of a rhombus can be calculated using the formula: Area = (diagonal 1 x diagonal 2)/2.

So, for this rhombus, the area = (10 x 20)/2 = 100 square units.

Part 3: The area formulas for a square and rhombus are not interchangeable because they have different ways of computing their areas. A square has all four sides equal in length, while a rhombus has opposite sides equal in length. The diagonals of a square bisect each other at right angles, and each diagonal divides the square into two congruent triangles, so the area of a square is simply side length squared (Area =[tex]s^2[/tex]). However, the diagonals of a rhombus bisect each other at right angles, but they do not necessarily divide the rhombus into congruent triangles. Therefore, the area of a rhombus is calculated using the lengths of the diagonals (Area = (diagonal 1 x diagonal 2)/2).

For example, let's consider a square with side length 4 units and a rhombus with diagonals 6 units and 8 units.

The area of the square = [tex]4^2 = 16[/tex]square units.

The area of the rhombus = (6 x 8)/2 = 24 square units.

As we can see, the formulas are not interchangeable.

To learn more about rhombus visit: https://brainly.com/question/27870968

#SPJ11

We will use the Poisson distribution, which is a probability distribution that models the number of events occurring in a fixed interval of time or space, given the average rate of occurrence and assuming that the events are independent and randomly distributed.

For this problem, we will assume that the number of days with 0.01 inch or more precipitation in Lewiston, Idaho, follows a Poisson distribution with parameter λ = 8.7.

(a) To find the probability that there are exactly 9 days with 0.01 inch or more precipitation, we can use the Poisson probability mass function:

P(X = k) = e^(-λ) * λ^k / k!

where X is the random variable representing the number of days with 0.01 inch or more precipitation, λ is the parameter of the Poisson distribution, and k is the number of events we are interested in.

Plugging in the values, we get:

P(X = 9) = e^(-8.7) * 8.7^9 / 9! ≈ 0.151

Therefore, the probability that there are exactly 9 days with 0.01 inch or more precipitation is approximately 0.151.

(b) To find the probability that there are at most 9 days with 0.01 inch or more precipitation, we can use the cumulative distribution function of the Poisson distribution:

P(X ≤ k) = ∑i=0^k e^(-λ) * λ^i / i!

Plugging in the values, we get:

P(X ≤ 9) = ∑i=0^9 e^(-8.7) * 8.7^i / i! ≈ 0.503

Therefore, the probability that there are at most 9 days with 0.01 inch or more precipitation is approximately 0.503.

(c) To find the probability that there are more than 9 days with 0.01 inch or more precipitation, we can subtract the probability of having 9 or fewer days from 1:

P(X > 9) = 1 - P(X ≤ 9) ≈ 0.497

Therefore, the probability that there are more than 9 days with 0.01 inch or more precipitation is approximately 0.497.

To know more about poisson distribution refer here:

https://brainly.com/question/7283210?#

#SPJ11

The mass of the original sample was approximately 1592.5 grams.

The half-life of an element is the time it takes for half of a given sample of that element to decay.

Let's assume that the original mass of the sample was x grams.

After the first half-life of 8 years, the mass of the sample would be x/2 grams.

After the second half-life (16 years total), the mass would be x/4 grams.

After the third half-life (24 years total), the mass would be x/8 grams.

We can continue this pattern until we get to 100 years (which is 12.5 half-lives):

Mass after 100 years = x/2^12.5

We also know from the problem that the mass after 100 years is 10 grams:

x/2^12.5 = 10

Solving for x:

x = 10 x 2^12.5

x ≈ 1592.5 grams

Therefore, the mass of the original sample was approximately 1592.5 grams.

Learn more about mass

brainly.com/question/19694949

#SPJ11

sorry, I am really sorry I really need the points. Just by seeing it I think in the 3 one am not sure but don't trust me because I just saw it and thought it was 3........

r has negative values when 2 cos θ > 1, and positive values otherwise.

r has negative values when 3θ is in the second or third quadrant, and positive values otherwise.

r has negative values when sin θ > 1/5, and positive values otherwise.

To find the intervals of positive and negative r values, we need to look at the cosine function. Since the cosine function has a maximum value of 1, we have r = 1 - 2 cos θ ≥ -1. Solving for cos θ, we get 2 cos θ ≤ 2, which means that r is negative when 2 cos θ > 1 and positive otherwise.

We can rewrite the polar equation r = 5 sin (3θ) as r = 5(sin θ)(cos^2 θ)(3)^(1/2). This equation is negative when sin θ is negative, which happens in the second and third quadrants. Therefore, r is negative when 3θ is in the second or third quadrant and positive otherwise.

Similarly, we can rewrite the polar equation r = 1 - 5 sin θ as r = 5(cos θ)(sin(π/2 - θ)). This equation is negative when sin(π/2 - θ) is negative, which happens when θ is in the second and third quadrants. Therefore, r is negative when sin θ > 1/5, and positive otherwise.

For more questions like Function click the link below:

https://brainly.com/question/16008229

#SPJ11

To build a ramp with a 15-inch rise for rolling gym equipment into your school, following ADA specifications, we should create a ramp with a run of 180 inches to maintain a 1:12 slope.

For building a ramp with a rise of 15 inches for rolling gym equipment into your school, following ADA specifications. Let's use these terms in our step-by-step explanation:

1. ADA specifications: The Americans with Disabilities Act (ADA) specifies that the slope of a ramp should be no more than 1:12, which means that for every 1 inch of rise, there should be 12 inches of run.

2. Ramp rise: In this case, the rise is 15 inches.

3. Calculate ramp run: To find the ramp run, we can use the ADA specification of 1:12. Multiply the rise (15 inches) by 12.

15 inches x 12 = 180 inches

4. Ramp run: Based on the calculation, the run for the ramp should be 180 inches.

5. Ramp length: To ensure a safe and accessible ramp, follow the ADA specifications and use a ramp length of 180 inches to achieve the 15-inch rise.

To know more about ADA specifications refer to

https://brainly.com/question/30286625

#SPJ11