Given that MNPQ is a rectangle with vertices M(3, 4), N(1, -6), and P(6, -7), find the coordinates Q that makes this a rectangle

The correct symbol to compare the expressions is < (less than).

7 × (2/10) is equivalent to 1.4, which is less than 7. Therefore, 7 is greater than 1.4, and we can write 7 × (2/10) < 7 as the comparison between the expressions.

To compare the two expressions, we can analyze their values without actually multiplying them. The expressions are:

1. 7 × (2/10)
2. 7

Now let's simplify the first expression without multiplying:

7 × (2/10) = 7 × (1/5) (since 2 and 10 have a common factor of 2)

Now let's compare:

7 × (1/5) ? 7

Since we're multiplying 7 by a fraction that is less than 1 (1/5), the result will be smaller than 7. Therefore, the correct comparison symbol is "<":

7 × (1/5) < 7

The correct expression so formed is 7 × (2/10) < 7.

To know more about expression, refer to the link below:

https://brainly.com/question/7097069#

#SPJ11

Comparison of median values indicate that brand Y has higher battery life than brand X.

Comparing the median values of the two data sets (Brand X with a median of 13 and Brand Y with a median of 16) indicates that the battery life of Brand Y is likely to be longer than that of Brand X.

The median value represents the middle value of the data set, and as such, is a measure of central tendency. Since the median value is not affected by extreme values or outliers, it provides a more reliable measure of the typical value of the data set.

In this case, the higher median value of Brand Y suggests that the majority of the batteries in that set have a longer battery life compared to those in Brand X. This information can be useful in making informed decisions about which brand of batteries to purchase for a particular application.

Learn more about median values

brainly.com/question/3515636

#SPJ11

Therefore, it will take Sam 8 minutes to cut another identical plank into only 3 pieces, working at the same pace.

An equation is a mathematical statement that shows that two expressions are equal. It consists of two parts: the left-hand side (LHS) and the right-hand side (RHS), which are connected by an equals sign (=). The LHS and RHS can be made up of variables, constants, and mathematical operators such as addition, subtraction, multiplication, division, exponentiation, and roots. The purpose of an equation is to find the values of the variables that satisfy the relationship between the LHS and the RHS. Equations are fundamental to many areas of mathematics, science, engineering, and everyday life.

Here,

If Sam cuts a plank of wood into 4 pieces, then he needs to make 3 cuts. Since each cut takes equally as long, he spends 12/3 = 4 minutes per cut.

To cut another identical plank of wood into 3 pieces, he needs to make 2 cuts. Since he spends 4 minutes per cut, it will take him 2 * 4 = 8 minutes to complete this task.

To know more about equation,

https://brainly.com/question/28243079

#SPJ1

Let's simplify the expression step by step:

25xy * sqrt(81/625 * x^2 * y^2)

= 25xy * (sqrt(81)/sqrt(625) * sqrt(x^2) / sqrt(y^2))

= 25xy * (9/25 * x/y)

= 9xy * 5/5

= 9xy

Therefore, the simplified form of the expression 25xy * sqrt(81/625 x^2y ^2) is option C, 9xy|xy|.

To know more about expression refer here

https://brainly.com/question/7557000#

#SPJ11

The length of the diagonal of the square is 22 meters.

A square is a four-sided two-dimensional geometric shape in which all sides are equal in length and all angles are right angles (90 degrees).It is a unique instance of a rectangle with equal sides. The opposite sides of a square are parallel to each other and the diagonals bisect each other at right angles.

A square is divided into two 45-45-90 triangles by its diagonal.

In a 45-45-90 triangle, the hypotenuse (the side opposite the right angle) is √2 times as long as each leg.

Therefore, in this square, the length of the diagonal (d) can be found by multiplying the length of one side (s) by √2:

d = s√2

In this case, the side length of the square is 11√2 meters, so:

d = 11√2 × √2 = 11 × 2 = 22 meters

Therefore, the length of the diagonal of the square is 22 meters.

To know more about rectangle, visit:

https://brainly.com/question/28993977

#SPJ1

Assuming that one snap cube represents one milliliter (ml) of paint, we can use five red snap cubes to represent 5 ml of red paint and three blue snap cubes to represent 3 ml of blue paint. We can arrange these snap cubes in a row to represent the recipe:

RRRRR BBB

This indicates that we mix 5 ml of red paint with 3 ml of blue paint to create the maroon paint.

To draw a sketch of the snap-cube representation of the maroon paint, we can combine the red and blue snap cubes into a single row:

RRRRR BBB

This gives us a row of eight snap cubes, which represents the maroon paint. Visually, the maroon paint will appear as a blend of red and blue, with a darker, richer hue than either color alone.

Each snap cube represents one milliliter (ml) of paint. Therefore, in this representation, each snap cube represents a fixed amount of paint, regardless of the color. In other words, each cube represents a unit of volume, rather than a unit of color or pigment.

The most likely main conflict in a story is that the people have trouble finding food. The Option B is correct.

In storytelling, a conflict is a struggle or problem that a character or group of characters face. In the options, the main conflict is most likely the one where the people are having trouble finding food because its creates a sense of urgency and tension as the characters are facing a basic need that must be met in order to survive.

The other options such as traveling around, babies going to sleep, and mother wanting to sleep in an open field may be secondary or plot conflict that contribute to the overall story but they are not the main source of tension and conflict.

Read more about story conflict

brainly.com/question/1909141

#SPJ4

Answer:

10.24 gallons

$276.48

Step-by-step explanation:

The area of the wall can be calculated by multiplying the length and height of the wall:

Area of wall = length x height = 32 x 16 = 512 square feet

To calculate the number of gallons of paint needed, we need to divide the area of the wall by the coverage of one gallon of paint:

Number of gallons of paint = Area of wall / Coverage of one gallon of paint

Number of gallons of paint = 512 / 50

Number of gallons of paint = 10.24

Therefore, it will take approximately 10.24 gallons of paint to paint the wall.

To calculate the cost of the paint, we need to multiply the number of gallons of paint by the cost per gallon:

Cost of paint = Number of gallons of paint x Cost per gallon

Cost of paint = 10.24 x $27

Cost of paint = $276.48

Therefore, it will cost $276.48 to paint the wall.

Nine ears of sweetcorn will cost $2.25 at this store.

To determine the cost of nine ears of sweetcorn, given that four ears cost one dollar, you can follow these steps:

1. Determine the cost of one ear of sweetcorn: Since four ears cost one dollar, we can calculate the cost per ear by dividing the total cost by the number of ears: $1 / 4 ears = $0.25 per ear.

2. Calculate the cost of nine ears: Multiply the cost of one ear by the number of ears desired: $0.25 per ear × 9 ears = $2.25.

So, nine ears of sweetcorn will cost $2.25 at this store.

To know more about cost price refer here:

https://brainly.com/question/30175345?#

SPJ11

The farmer sold 3.16 kilograms of apples at the farmers market.

What is division?

A division is one of the fundamental mathematical operations that divides a larger number into smaller groups with the same number of components. How many total groups will be established, for instance, if 20 students need to be separated into groups of five for a sporting event? The division operation makes it simple to tackle such issues. Divide 20 by 5 in this case. 20 x 5 = 4 will be the outcome. There will therefore be 4 groups with 5 students each. By multiplying 4 by 5 and receiving the result 20, you may confirm this value.

Let's start by finding out the weight of pears the farmer sold.

Weight of pears = 3/5 x 7.9 kg = 4.74 kg

To find the weight of apples, we can subtract the weight of pears from the total weight:

Weight of apples = Total weight - Weight of pears

Weight of apples = 7.9 kg - 4.74 kg

Weight of apples = 3.16 kg

Therefore, the farmer sold 3.16 kilograms of apples at the farmers market.

Learn more about weight here,

https://brainly.com/question/31528936

#SPJ4

The true statement is that if the quadrilateral is not a rectangle, it can  still be a parallelogram

The statement in the question is given as

A quadrilateral has two consecutive right angles

By definition, the parallelograms that have two consecutive right angles are rectangles and squares

This is because all the four angles in a rectangle and a square are right angles

Using the above as a guide, we can conclude that the quadrilateral can still be a parallelogram if the quadrilateral has two consecutive right angles and if the quadrilateral is not a rectangle

Read more aout parallelogram at

https://brainly.com/question/970600

#SPJ1

To conduct a hypothesis test comparing the mean voltages of the two types of batteries (K and Q), you'll need to state the null and alternative hypotheses. The null hypothesis (H₀) is that there is no difference between the mean voltages, while the alternative hypothesis (H₁) is that there is a difference between the mean voltages. In this case:

Step 1 of 5: State the null and alternative hypotheses for the test.

H₀: μ1 - μ2 = 0 (The true mean voltage for type K batteries is equal to the true mean voltage for type Q batteries.)

H₁: μ1 - μ2 ≠ 0 (The true mean voltage for type K batteries is not equal to the true mean voltage for type Q batteries.)

In the next steps, you would calculate the test statistic, determine the critical value, make a decision to reject or fail to reject the null hypothesis, and finally interpret the results based on the 0.02 level of significance.

To know more about null hypothesis refer here

https://brainly.com/question/19263925#

#SPJ11

The expression in terms of π that represents the area of the shaded part of ⊙R is 3πR²/4, obtained by subtracting the area of the smaller circle from the larger circle.

To find the area of circle of the shaded part of ⊙R, we need to subtract the area of the smaller circle from the area of the larger circle.

The area of a circle is given by the formula A = πr², where r is the radius of the circle.

Let the radius of the larger circle be R and the radius of the smaller circle be r. Then the area of the shaded part can be expressed as:

A(shaded) = A(large circle) - A(small circle)

= πR² - πr²

We can simplify this expression further by noticing that the radius of the smaller circle is half the radius of the larger circle, so r = R/2. Substituting this into the equation gives:

A(shaded) = πR² - π(R/2)²

= πR² - πR²/4

= 3πR²/4

Therefore, the area of the shaded part of ⊙R can be expressed as 3πR²/4. This expression represents the difference in the area between the larger and smaller circles, which gives us the area of the shaded region.

Learn more about area of circle

brainly.com/question/28642423

#SPJ11

The expression in terms of π that represents the area of the shaded part of ⊙R is 3πR²/4, obtained by subtracting the area of the smaller circle from the larger circle.

To find the area of circle of the shaded part of ⊙R, we need to subtract the area of the smaller circle from the area of the larger circle.

The area of a circle is given by the formula A = πr², where r is the radius of the circle.

Let the radius of the larger circle be R and the radius of the smaller circle be r. Then the area of the shaded part can be expressed as:

A(shaded) = A(large circle) - A(small circle)

= πR² - πr²

We can simplify this expression further by noticing that the radius of the smaller circle is half the radius of the larger circle, so r = R/2. Substituting this into the equation gives:

A(shaded) = πR² - π(R/2)²

= πR² - πR²/4

= 3πR²/4

Therefore, the area of the shaded part of ⊙R can be expressed as 3πR²/4. This expression represents the difference in the area between the larger and smaller circles, which gives us the area of the shaded region.

Learn more about area of circle

brainly.com/question/28642423

#SPJ11

To solve this problem, we will use the formula for exponential decay as follows: V = P * e^(-rt) where V is the value after t years, P is the initial value, r is the annual interest rate as a decimal, and t is the time in years.

What is Depreciation: Depreciation is dependent on a number of estimates.The method in which companies determine the depreciation value of their assets is different from one another. Some companies may use a straight line method of depreciation and another may count the depreciation according to asset's production value. What is exponential decay: An exponential function's curve is created by a pattern of data called exponential decay, which exhibits higher decreases over time .Given that a brand new Audi R8 is purchased for $148,700 before taxes, and the car depreciates at a rate of 8%, we can find how much it will be worth in 5 years. Using the formula for exponential decay, we have V = P * e^(-rt) where     P = $148,700r = 0.08t = 5. Therefore,V = $148,700 * e^(-0.08 * 5), V = $148,700 * e^(-0.4)V ≈ $82,429.61. Therefore, the car will be worth approximately $82,429.61 in 5 years.

Learn More About Deprication of rate's: https://brainly.com/question/21212050

#SPJ11

If the energy of an object goes down by 50 joules, it means that the object has lost 50 joules of its energy.

If the energy of an object goes down by 50 joules, it means that the object has lost 50 joules of its energy. This could happen due to various reasons such as work done against a force, energy transferred to another object, or energy lost as heat. Here's a step-by-step explanation:

1. Identify the initial energy of the object.
2. Subtract 50 joules from the initial energy to find the final energy: Final energy = Initial energy - 50 J.
3. Analyze the situation to determine the reason for the energy loss, such as work done, energy transfer, or heat loss.
4. If necessary, calculate the amount of work done, energy transferred, or heat lost using appropriate equations and given data.

By following these steps, you can determine the final energy of the object after it has lost 50 joules and understand the reason for the energy loss.

To learn more about energy

https://brainly.com/question/31346995

#SPJ11

The order of division affects the result; 3 ÷ 1/5 is 15 and 1/5 ÷ 3 is 1/15.

To find the answer, we can calculate the quotient of three divided by one-fifth, which is:

3 ÷ (1/5) = 15

And the quotient of one-fifth divided by three is:

(1/5) ÷ 3 = 1/15

These two quotients are different because the order of division changes the result. In the first case, we divide 3 by a smaller number (one-fifth), which results in a larger quotient (15). In the second case, we divide a smaller number (one-fifth) by a larger number (three), which results in a smaller quotient (1/15).

To give a story describing each situation:

Learn more about quotient

brainly.com/question/16134410

#SPJ11

Answer:

Sure. Here is the equation for the cost, C, after h hours of babysitting:

```

C = 3 + 5h

```

This equation can be found by combining the flat fee of $3 with the hourly rate of $5. For example, if Nicole babysits for 2 hours, she will make $3 + (2 * $5) = $13.

To find how much Nicole will make after babysitting for 8 hours, we can simply substitute h = 8 into the equation. This gives us:

```

C = 3 + 5(8) = 3 + 40 = $43

```

Therefore, Nicole will make $43 after babysitting for 8 hours.

Answer:c= 3 + 5(8)

Step-by-step explanation:

3 is flat fee, and then plus $5 and hour. you know she's going for 8 hours, so you multiply hourly rate by the number of hours plus flat fee and you get your answer

We can start by using the formula for the volume of a cylinder, which is:

V = πr^2h

where V is the volume, r is the radius (half of the diameter), and h is the height.

In this problem, we are given the height and volume of the can, but we need to find the diameter (which is twice the radius). We can rearrange the formula above to solve for the radius:

r = √(V/πh)

Substituting the given values, we get:

r = √(144/π x 11.4) ≈ 1.5 cm

Finally, we can find the diameter by doubling the radius:

d = 2r ≈ 3 cm

Therefore, the can's diameter is approximately 3 centimeters.

Step-by-step explanation:

the

answer

of

this

question

is

9 \sqrt{2}

Do you like this (^__^) ??

The general solution to the differential equation dy/dt - 5y = A is y = Ce^(5t) + A/5, where C is a constant of integration. The general solution is y = (A/5) + Ce^(5t). so, the correct answer is D).

The general solution to the differential equation dy/dt - 5y = A, where A is a constant, is

y = Ce^(5t) + A/5

where C is an arbitrary constant determined by any initial or boundary conditions given.

The general solution is a combination of the homogeneous solution y_h = Ce^(5t) (which satisfies the differential equation without the constant term A) and the particular solution y_p = A/5 (which satisfies the differential equation with A but without any initial or boundary conditions).

so, the correct option is D).

To know more about differential equation:

https://brainly.com/question/14620493

#SPJ4

--The given question is incomplete, the complete question is given

" Answer quickly please

Given that A is a constant, the general solution to the differential equation dy/dt -5y = A is Select one O a. 3t2 2 Ob. 3= Ae-56 Ос. y = Aest Od y = Ce^(5t) +A/5 The solution to the exact differential equation"--

part a.

the percentage of eggs between 42 and 45mm is 48.48%

part b.

The median width is approximately (42+45)/2 = 43.5mm.

The median length is approximately (56+59)/2 = 57.5mm.

part c.

The width of grade A chicken eggs has a range of about 24mm.

part d.

I think its impossible to determine because we don't have the value for the standard deviation.

The second option should be correct.

A histogram is described as an approximate representation of the distribution of numerical data.

part a.

From the histogram, we see that the frequency for the bin that ranges from 42 to 45mm is 4 and we have  a total of 33 eggwe use this values and calculate the percentage of eggs between 42 and 45mm is 48.48%.

part b.

we have an  estimation  that the median of the width is 48mm and the median of the length is around 60mm.

part c.

Also from the histogram, we notice  that the smallest value is around 36mm and the largest value is around 66mm, hence the width of grade A chicken eggs has a range of about 24mm.

In a histogram, the range is the width that the bars cover along the x-axis and these are approximate values because histograms display bin values rather than raw data values.

Learn more about histogram at:

https://brainly.com/question/2962546

#SPJ1

The equation y=0.96x represents the cost in dollars and cents, y, for x bottles of apple juice at store A. This means that if Landon wants to buy x bottles of apple juice from store A, he would pay 0.96x dollars and cents. However, we do not know the value of x from the given information.

On the other hand, we know that Landon can buy 14 bottles of apple juice from store B for $34.16. This means that the cost of one bottle of apple juice at store B is $2.44 (34.16 ÷ 14). We do not know the cost of one bottle of apple juice at store A, but we can use the equation y=0.96x to find out.

Let's assume that Landon wants to buy 14 bottles of apple juice from store A as well. We can substitute x=14 in the equation to find the total cost:

y = 0.96(14) = 13.44

This means that Landon would pay $13.44 for 14 bottles of apple juice at store A. However, we can see that buying 14 bottles of apple juice from store B is cheaper than buying the same amount from store A, as Landon would pay $34.16 at store B and $13.44 at store A. Therefore, it is more cost-effective for Landon to buy apple juice from store B in this case.

To know more about dollars refer here

https://brainly.com/question/14982791#

#SPJ11

The correct sequence of steps for copying Line Segment DE using dynamic geometry software is in the order of 2,1,4,3. So, correct option is C.

The correct sequence of steps for copying Line Segment DE using dynamic geometry software is:

1.) Draw Line Segment DE with endpoint H on the circle.

2.) Draw a point and label it G.

3.) Construct a circle centered at the point G with radius Line Segment DE.

4.) Line Segment DE ≅ Line Segment GH

Therefore, option c.) 2,1,4,3 is the correct sequence of steps. The first step is to draw the original line segment DE with endpoint H on the circle.

The second step is to draw a point and label it G. The third step is to construct a circle centered at G with the same radius as Line Segment DE. Finally, in the fourth step, the line segment GH is drawn such that it is congruent to Line Segment DE, completing the copy of Line Segment DE.

So, correct option is C.

To learn more about circle click on,

https://brainly.com/question/30947467

#SPJ1

The two aircraft are 128.535 far away.

What is the distance formula?

The d-distance between two places is calculated using the distance formula. The Euclidean distance formula is another name for the formula used to calculate the separation between two points on a two-dimensional plane.

Here, we have

Given: Two radars A and B are 80km apart and B is due to the east of A. One aircraft is on a bearing of 030 degrees from A and 346 degrees from B. A second aircraft is on a bearing 325 degrees from A and 293 degrees from B.

Calculating the Slope of AC,  tan60° = 1.732

Calculating the Slope of BC, tan104° = -4.011

Calculating the Slope of AD, tan125° = -1.482

Calculating the Slope of BD, tan157° = -0.424

When pointing C intercepts:

y₁ = 1.732x₁....(1)

y₁ = -4.011(x₁-80)....(2)

Solving equation(1) and(2) , we get

x₁ = 55.873

y₁ = 96.772

When point D intercepts:

y₂ = -1.428x₂....(3)

y₂ = 0.424(x₂-80)....(4)

Solving equations (3) and (4), we get

x₂ = 18.315

y₂  = -26.154

Calculating distance by applying the distance formula:

D = [tex]\sqrt{(y_2-y_1)^2+(x_2-x_1)^2}[/tex]

D = [tex]\sqrt{(-26.154-96.772)^2+(18.315-55.873)^2}[/tex]

D = [tex]\sqrt{4986.9019+1410.6033}[/tex]

D = 128.535

Hence, the two aircraft are 128.535 far away.

To learn more about the distance formula from the given link

https://brainly.com/question/28551043

#SPJ4

The dimensions of the rectangular sticker can be found by using the area and perimeter formulas. After solving the resulting system of equations, it can be concluded that the sticker has dimensions of 15 cm by 7 cm.

Let the length and width of the rectangle be l and w respectively.

Given that the area of the rectangle is 105 square centimeters.

So, lw = 105 --- equation (1)

Also, given that the perimeter is 44 centimeters.

Perimeter = 2(l + w) = 44

l + w = 22 --- equation (2)

Solving equations (1) and (2) simultaneously, we get:

l = 15 and w = 7

Therefore, the dimensions of the rectangular sticker are 15 cm by 7 cm.

To know more about area:

https://brainly.com/question/19477740

#SPJ4

The length of a leg of the isosceles trapezoid is 20 units.

To find the length of a leg of the isosceles trapezoid, you can use the Pythagorean theorem. Given the lengths of the bases are 20 and 44, and the length of the altitude is 16, first find the difference between the bases:

44 - 20 = 24

Since the trapezoid is isosceles, the difference between the bases will be equally divided between both legs. Therefore, the horizontal distance for each leg is:

24 / 2 = 12

Now you have a right triangle formed by the leg, altitude, and the horizontal distance. Applying the Pythagorean theorem, let L be the length of the leg:

L^2 = 16^2 + 12^2
L^2 = 256 + 144
L^2 = 400

Taking the square root of both sides:

L = √400 = 20

The length of a leg of the isosceles trapezoid is 20 units.

To learn more about triangle, refer below:

https://brainly.com/question/2773823

#SPJ11

The only possible value of W is:

W ≈ 71.6° to the nearest 10th of a degree.

We can use the Law of Cosines to find the angle W opposite to the side w:

cos(W) = (v^2 + w^2 - u^2) / (2vw)

cos(W) = (3.6^2 + 5.3^2 - u^2) / (2 * 3.6 * 5.3)

We can solve for u by using the Law of Cosines for the angle V:

cos(V) = (u^2 + v^2 - w^2) / (2uv)

cos(32°) = (u^2 + 3.6^2 - 5.3^2) / (2 * u * 3.6)

Simplifying the equation and solving for u, we get:

u = sqrt(3.6^2 + 5.3^2 - 2 * 3.6 * 5.3 * cos(32°)) ≈ 3.8 inches

Now we can substitute this value of u into the equation for cos(W) and solve for cos(W):

cos(W) = (3.6^2 + 5.3^2 - 3.8^2) / (2 * 3.6 * 5.3) ≈ 0.315

Taking the inverse cosine, we get:

W ≈ 71.6° or W ≈ 288.4°

Note that since the angle W is in a triangle, it must be between 0° and 180°. Therefore, the only possible value of W is:

W ≈ 71.6° to the nearest 10th of a degree.

To know more about Law of Cosines refer here:

https://brainly.com/question/17289163

#SPJ11

The area of the swimming pool cover obtained by considering the area as the sum of the areas of a rectangle and two semicircles is about 218.54 ft²

The area of a semicircle is; A = π·D²/(2 × 4) = π·D²/8

The area of the swimming pool cover can be found from the area of the composite figure comprising of one rectangle and the two semicircles as follows;

The length of the parallel sides which represent the length of the rectangle = 14 ft

The distance the parallel sides are apart = The width of the rectangle = 10 ft

The width of the rectangle = The diameter of the semicircle part of the swimming pool = 10 ft

Area of the rectangle = 14 ft × 10 ft = 140 ft²

Area of the two semicircle = 2 × π × (10 ft)²/8 = 25·π ft²

The area of the swimming pool cover = 140 ft² + 25·π ft² ≈ 218.54 ft²

Learn more on the area of composite figures here: https://brainly.com/question/31399348

#SPJ1

The solutions for the value of k for the polynomial k²x³ - 6kx + 9 divided by x - 1 is derived to be k = 4 or k = 2 .

A polynomial is a mathematical expression which have a sum of powers in one or more variables with coefficients. The highest power of the variable in a polynomial is called its degree.

The remainder theorem states that if a polynomial say f(x) is divided by x - a, then the remainder is f(a)

For the polynomial; k²x³ - 6kx + 9 divided by x - 1, we shall evaluate for f(1) to solve k as follows:

k²(1)³ - 6k(1) + 9 = 1

k² - 6k + 9 - 1 = 0

k² - 6k + 8 = 0

by factorization;

(k - 4)(k - 2) = 0

k = 4 or k = 2

Therefore, solutions for the value of k for the polynomial k²x³ - 6kx + 9 divided by x - 1 is derived to be k = 4 or k = 2 .

Read more about polynomial here:https://brainly.com/question/24729294

#SPJ1

To determine if we can conclude that more than 60% of the sampled population have completed the Hepatitis B vaccine series, we need to perform a hypothesis test.

Our null hypothesis (H0) is that the proportion of infants who completed the vaccine series is equal to or less than 60%, while our alternative hypothesis (Ha) is that the proportion is greater than 60%.

We can use a one-sample proportion test to test this hypothesis. The test statistic is calculated as follows:

z = (p - P) / sqrt(P(1-P)/n)

where p is the sample proportion (0.66), P is the hypothesized proportion under the null hypothesis (0.6), and n is the sample size (14).

Plugging in the values, we get:

z = (0.66 - 0.6) / sqrt(0.6(1-0.6)/14) = 0.67

Using a significance level of α = 0.01, our critical value for a one-tailed test is 2.33 (from a z-table). Since our test statistic (0.67) is less than the critical value (2.33), we fail to reject the null hypothesis.

Therefore, we cannot conclude that more than 60% of the sampled population have completed the hepatitis b vaccine series based on these data.

To know more about Hypothesis testing:

https://brainly.com/question/15980493

#SPJ11