Given the chart of bond energies, calculate the enthalpy change for the reaction below. Show all work

Both Scientist A and Scientist B achieved same yield of KMnO₄, indicating they obtained the maximum possible amount based on the starting materials and reaction conditions. The percent yield for Scientist A is approximately 100% and for Scientist B, it is also approximately 100%

To solve these problems, let's go step by step:

1. If the end product is 1.5 moles of KMnO₄, according to the balanced chemical equation:

2 MnO₂ + 4 KOH + O₂ -> 2 KMnO₄ + 2 KOH + H₂

We can see that the stoichiometric ratio between KMnO₄ and MnO₂ is 2:2. Therefore, the number of moles of MnO₂ used in the reaction would be 1.5 moles.

2. To determine how much KOH was used when the end product is 200.0 g of KMnO₄:

Again, using the balanced chemical equation, we can see that the stoichiometric ratio between KMnO₄ and KOH is 2:4. Therefore, the number of moles of KOH used would be twice the number of moles of KMnO₄.

Given that the molar mass of KMnO₄ is approximately 158.034 g/mol, we can calculate the number of moles of KMnO₄:

moles of KMnO₄ = mass of KMnO₄ / molar mass of KMnO₄

moles of KMnO₄ = 200.0 g / 158.034 g/mol

moles of KMnO₄ ≈ 1.265 mol

Since the stoichiometric ratio is 2:4, the number of moles of KOH would be twice that:

moles of KOH = 2 * moles of KMnO₄

moles of KOH = 2 * 1.265 mol

moles of KOH ≈ 2.53 mol

3. To determine the theoretical yield of potassium permanganate when starting with 500 g of MnO₂:

Again, using the balanced chemical equation, we can see that the stoichiometric ratio between MnO₂ and KMnO₄ is 2:2. Therefore, the molar ratio is 1:1.

Given that the molar mass of MnO₂ is approximately 86.9375 g/mol, we can calculate the number of moles of MnO₂:

moles of MnO₂ = mass of MnO₂ / molar mass of MnO₂

moles of MnO₂ = 500 g / 86.9375 g/mol

moles of MnO₂ ≈ 5.75 mol

Since the stoichiometric ratio is 1:1, the theoretical yield of KMnO₄ would be equal to the number of moles of MnO₂:

Theoretical yield of KMnO₄ = moles of MnO₂

Theoretical yield of KMnO₄ ≈ 5.75 mol

4. To calculate the percent yield for Scientist A and Scientist B, we need the actual yields of KMnO₄ produced by each scientist. Let's assume Scientist A produces 83.67 g of KMnO₄ and Scientist B produces 81.35 g of KMnO₄.

Percent yield = (actual yield / theoretical yield) * 100

Percent yield for Scientist A = (83.67 g / (2 * 83.67 g)) * 100 ≈ 100%

Percent yield for Scientist B = (81.35 g / (2 * 81.35 g)) * 100 ≈ 100%

5. Both Scientist A and Scientist B achieved 100% yield, indicating that they obtained the maximum possible amount of KMnO₄ based on the starting amount

To know more about the KMnO₄ refer here :

https://brainly.com/question/29144888#

#SPJ11

Complete question :

If your end product is 1.5 moles of KMnO4. how many moles of manganese oxide were used in the reaction? The equation for the production of potassium permanganate is as follows: 2 MnO2+ 4 KOH + O2- 2 KMnO4 + 2 KOH + H2 You must show all work to receive full credit If your end product is 200.0 g KMnO4 how much KOH did you start with? The equation for the production of potassium permanganate is as follows: 2 MnO2+ 4 KOH + O2+ 2 KMnO4 + 2 KOH + H2 You must show all work to receive full credit. A company manufacturing KMnO, wants to obtain the highest yield possible Two of their research scientists are working on a technique to increase the yield Both scientists started with 500 g of manganese oxide What is the theoretical yield of potassium permanganate when starting with 500 g MnO2? The equation for the production of potassium permanganate is as follows 2 MnO2+ 4 KOH + 02 - 2 KMnO, +2 KOH + H2 You must show all work to receive tul credit Scientist A produces 83.67 g KMnO4 while Scientist B produces 81.35 g KMnO4 What is the percent yield for Scientist A? What is the percent yield for Scientist B? You must show all work to receive full credit. The equation for the production of potassium permanganate is as follows: 2 MnO2+ 4 KOH + O2-2 KMnO4+2 KOH + H2 of the two scientists' results, whose would you present to the boss as an example of the product your company manufacturers? Justify your answer with evidence and scientific reasoning BIETE

78.2 grams of oxygen (O₂) reacted with copper (Cu) to produce copper (II) oxide (CuO). When the oxygen reacts with 4.88 moles of copper, it will produce 9.76 moles of copper oxide (CuO).

The balanced chemical equation for the reaction between oxygen and copper is:

2Cu + O₂ → 2CuO

From the equation, we see that 1 mole of O₂ reacts with 2 moles of Cu to produce 2 moles of CuO.

First, we need to convert the given mass of O₂ to moles:

78.2 g O₂ × (1 mol O₂/32.00 g O₂) = 2.44 mol O₂

According to the stoichiometry of the balanced equation, 2 moles of Cu are required for every 1 mole of O₂ reacted. Therefore, the moles of Cu needed can be calculated as:

2.44 mol O₂ × (2 mol Cu/1 mol O₂) = 4.88 mol Cu

So, 4.88 moles of Cu will react with 78.2 grams of O₂ to produce 9.76 moles of CuO.

To know more about the copper (II) oxide refer here :

https://brainly.com/question/9173155#

#SPJ11

The mass of chlorine needed to react with 0.175 g of gold is 94.52 mg.

The balanced chemical reaction is :
2 Au + 3 Cl₂ → 2 AuCl₃

Relative atomic masses: Cl = 35.5 and Au = 197

Converting the mass of gold to moles:
0.175 g Au * (1 mol Au / 197 g Au) = 0.00088756 mol Au

The number of moles of Cl₂ needed to react with the gold is:
=0.00088756 mol Au * (3 mol Cl₂ / 2 mol Au) = 0.00133134 mol Cl₂

Converting the moles of Cl₂ to grams:
=0.00133134 mol Cl₂ * (2 x 35.5 g Cl₂ / 1 mol Cl₂) = 0.09452 g Cl₂

Converting the mass of Cl₂ from grams to milligrams:
=0.09452 g Cl₂ * (1000 mg / 1 g) = 94.52 mg Cl₂

Therefore, the mass of chlorine needed to react with 0.175 g of gold is approximately 94.52 mg.

To learn more about moles visit:

https://brainly.com/question/24191825

#SPJ11

Hydrogen peroxide is a major contributor to photochemical smog, which is a type of air pollution that is formed through the reaction of sunlight with various pollutants in the atmosphere.

When sunlight shines on the atmosphere, it causes a chain reaction that leads to the formation of photochemical smog.

Hydrogen peroxide is produced in the atmosphere through the reaction of hydrocarbons and nitrogen oxides. Hydrocarbons are compounds that contain carbon and hydrogen, and they are emitted by vehicles, factories, and other sources. Nitrogen oxides are emitted by vehicles and power plants.

When these two pollutants react with sunlight, they form a variety of other compounds, including hydrogen peroxide. The hydrogen peroxide then reacts with other pollutants in the atmosphere, such as volatile organic compounds, to form photochemical smog.

Photochemical smog is a serious environmental issue because it can cause a variety of health problems, including respiratory issues, eye irritation, and even cancer. It can also damage crops and other vegetation, and can contribute to global warming.

Overall, hydrogen peroxide plays a key role in the formation of photochemical smog, and reducing its emissions is an important step in improving air quality and protecting public health.

To know more about Hydrogen peroxide, visit:

https://brainly.com/question/29102186#

#SPJ11

Answer:   Elements and compounds are both examples of pure substances.

Explanation:

The pH of the buffer solution will decrease by 0.28 units when 0.081 mol of HI is added

To solve this problem, we need to use the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

where pKa is the dissociation constant of the acid (NH4+) and A- is the conjugate base (NH3).

First, we need to find the pKa of NH4+ by using the equation:

pKa = -log(Ka)

where Ka is the acid dissociation constant. The Ka for NH4+ is 5.6 x 10^-10, so:

pKa = -log(5.6 x 10^-10) = 9.25

Next, we need to calculate the concentrations of NH4+ and NH3 in the buffer solution after the addition of HI. We can use the equation:

Cfinal = Cinitial + moles added / volume

The volume of the buffer is 1.00 L, and we are adding 0.081 mol of HI, which will react with NH3 according to the equation:

HI + NH3 -> NH4+ + I-

Since the reaction is 1:1, we will end up with 0.081 mol of NH4+ and 0.081 mol of I-. Therefore:

[C(NH4+)]final = [C(NH4+)]initial + 0.081 mol / 1.00 L = 0.380 M
[C(NH3)]final = [C(NH3)]initial - 0.081 mol / 1.00 L = 0.246 M

Now we can calculate the pH of the buffer before and after the addition of HI. Using the Henderson-Hasselbalch equation:

pHbefore = 9.25 + log([NH3] / [NH4+])
         = 9.25 + log(0.327 / 0.299)
         = 9.25 + 0.074
         = 9.32

pHafter = 9.25 + log([NH3]final / [NH4+]final)
        = 9.25 + log(0.246 / 0.380)
        = 9.25 - 0.210
        = 9.04

Finally, we can calculate the pH change:

pHchange = pHafter - pHbefore
        = 9.04 - 9.32
        = -0.28

Therefore, the pH of the buffer solution will decrease by 0.28 units when 0.081 mol of HI is added.

Know more about Buffer Solution here:

https://brainly.com/question/24262133

#SPJ11

5.2 moles of aluminum reacting with excess iron (III) oxide would release 2210 J of energy and 4.9 g of aluminum reacting with excess iron (III) oxide would produce 38.5 J of energy.

To find out the amount of energy released when 5.2 moles of aluminum reacts with excess iron (III) oxide, we can use the given enthalpy change of the reaction and stoichiometry.

Using the balanced chemical equation,

2Al(s) + Fe₂O₃(s)→Al₂O₃(s) + 2Fe(s)

We can see that 2 moles of aluminum react with 1 mole of Fe₂O₃.

Now, we can calculate the energy released using the given enthalpy change,

ΔH = -850 J/2 moles Al × 5.2 moles Al = -2210 J

Therefore, the amount of energy released would be -2210 J. To calculate the amount of energy produced when 4.9 g of aluminum reacts with excess iron (III) oxide, we can first convert the given mass of aluminum to moles. The molar mass of aluminum is 26.98 g/mol, so the amount of moles of aluminum would be,

4.9 g Al × (1 mol Al / 26.98 g Al) = 0.181 mol Al

0.181 mol Al × (1mole Fe₂O₃/2moles Al)

= 0.0905 mol Fe₂O₃

Finally, we can calculate the energy produced using the given enthalpy change,

ΔH = -850 J/2 moles Al × 0.0905 moles Fe₂O₃ = -38.5 J. Therefore, the amount of energy produced would be -38.5 J.

To know more about energy of a reaction, visit,

https://brainly.com/question/3682966

#SPJ4

Therefore the correct answer is A. 75.5%. The %purity of the

[tex]Mg(OH)_2 + 2HCl + MgCl_2 + 2H_2O HCI + NaOH + NaCl + H_2O[/tex] is 75.5%.

First, we need to calculate the amount of [tex]HCl[/tex] that reacted with the [tex]Mg(OH)_2[/tex]:

0.120 mol/L [tex]HCl[/tex] x 0.0500 L = 0.00600 mol [tex]HCl[/tex]

From the balanced equation, we know that 1 mole of [tex]Mg(OH)_2[/tex] reacts with 2 moles of [tex]HCl[/tex], so:

0.00600 mol [tex]HCl[/tex] x (1 mol [tex]Mg(OH)_2[/tex] / 2 mol [tex]HCl[/tex]) = 0.00300 mol [tex]Mg(OH)_2[/tex]

Next, we need to calculate the amount of [tex]NaOH[/tex] used in the back-titration:

0.095 mol/L [tex]NaOH[/tex] x 0.00376 L = 0.0003572 mol [tex]NaOH[/tex]

Since the amount of [tex]NaOH[/tex] used is equal to the amount of excess [tex]HCl[/tex], we can use this value to calculate the amount of [tex]HCl[/tex] that reacted with the [tex]Mg(OH)_2[/tex]:

0.0003572 mol [tex]NaOH[/tex] x (1 mol [tex]HCl[/tex] / 1 mol [tex]NaOH[/tex]) = 0.0003572 mol [tex]HCl[/tex]

The amount of [tex]Mg(OH)_2[/tex] that reacted with the [tex]HCl[/tex] is therefore:

0.00300 mol - 0.0003572 mol = 0.00264 mol [tex]Mg(OH)_2[/tex]

The mass of the [tex]Mg(OH)_2[/tex] sample is:

218 g / 58.32 g/mol = 3.741 mol [tex]Mg(OH)_2[/tex]

Therefore, the percent purity of the [tex]Mg(OH)_2[/tex] is:

(0.00264 mol / 3.741 mol) x 100% = 0.0705 x 100% = 7.05%

Therefore the correct answer is A. 75.5%.

Learn more about Magnesium hydroxide at

brainly.com/question/21904397

#SPJ4

Energy sources have different advantages and disadvantages such as their impact on the natural environment, their high costs, their maintenance and their renewability.

There are many sources of energy available to power our daily lives. Here are four of the most commonly used sources, along with their advantages and disadvantages:

Fossil fuels have been the primary source of energy for centuries. They are reliable and provide a large amount of energy for a relatively low cost. However, the process of extracting, transporting and burning these fuels has serious environmental consequences. They are finite resources, and the increasing demand for them is leading to resource depletion, price volatility, and geopolitical conflicts.

Nuclear energy is a reliable, low-carbon source of energy that can generate large amounts of electricity. It does not produce greenhouse gases or other air pollutants, which makes it an attractive alternative to fossil fuels. However, nuclear accidents can have devastating environmental and human impacts. The radioactive waste produced by nuclear power plants also poses a significant challenge to disposal and storage.

Solar energy is a clean, renewable source of energy that is increasingly popular. It does not produce any emissions or pollution, and the costs of installation have decreased significantly in recent years. However, solar power generation is limited by weather conditions and geographic location. It also requires a significant initial investment and a large amount of space.

Wind energy is another clean, renewable source of energy that is growing in popularity. It is also relatively inexpensive and can generate a significant amount of electricity. However, like solar power, wind power generation is dependent on weather conditions and geographic location. Wind turbines can also be noisy and can impact wildlife and their habitats.

In conclusion, all sources of energy have advantages and disadvantages. Fossil fuels have been the primary source of energy for many years, but their environmental impact is becoming increasingly clear. Nuclear energy is a low-carbon source of energy, but poses significant risks. Solar and wind energy are both clean and renewable, but have limitations in terms of weather and geographic location. To achieve a sustainable energy future, we need to continue developing and implementing a mix of renewable and non-renewable energy sources while minimizing their negative impacts on the environment and society.

Learn more about sources of energy in: https://brainly.com/question/29763772

#SPJ1

One formula unit of ammonium dichromate, three ions would form upon dissociation in water.

When ammonium dichromate (NH₄)₂Cr₂O₇ dissociates in water, it breaks down into two ammonium ions (NH₄⁺) and one dichromate ion (Cr₂O₇²⁻). The dissociation is represented by the following chemical equation:

(NH₄)2Cr₂O₇ → 2NH₄⁺ + Cr₂O₇²⁻

Therefore, a total of three ions would be formed from the dissociation of ammonium dichromate in water. The two ammonium ions would have a positive charge, while the dichromate ion would have a negative charge.

These ions can interact with other ions in the solution and participate in various chemical reactions. The dissociation of ammonium dichromate is important in various industrial processes, as well as in chemical education for demonstrating chemical reactions and properties of ions.

To know more about the ammonium dichromate refer here :

https://brainly.com/question/15968213#

#SPJ11

Valence electrons are the outermost electrons of an atom, and they play a significant role in determining the atom's chemical properties, including its reactivity.

Valence electrons are responsible for the formation of chemical bonds between atoms, which are essential for the creation of molecules and compounds.

An atom's valence electrons determine its ability to form bonds and interact with other atoms. The number of valence electrons an atom possesses corresponds to its position on the periodic table. For example, elements in the same group of the periodic table have the same number of valence electrons and exhibit similar chemical properties.

Atoms with a full valence shell, such as noble gases, are stable and unreactive because they have no need to form bonds with other atoms. On the other hand, atoms with incomplete valence shells are more reactive and have a strong tendency to bond with other atoms to achieve a full valence shell.

For example, halogens have seven valence electrons and are highly reactive because they only need one more electron to achieve a full valence shell.

The reactivity of an atom depends on the number of valence electrons it has and its ability to form chemical bonds. Atoms with one or two valence electrons tend to lose them to form positive ions, while atoms with five, six, or seven valence electrons tend to gain electrons to form negative ions.

This behavior is due to the fact that a full valence shell is more stable than an incomplete one.

In conclusion, valence electrons are crucial in determining an atom's chemical properties, including its reactivity. The number of valence electrons an atom possesses determines its position in the periodic table and its ability to form chemical bonds with other atoms, which ultimately affects its behavior in chemical reactions.

To know more about Valence electrons, visit:

https://brainly.com/question/28977387#

#SPJ11

The central atom of a molecule that exceeds the octet rule must come from period 3 or below.

This is because elements in these periods have empty d-orbitals available for hybridization, which allows them to form more than four covalent bonds and exceed the octet rule.

Examples of such elements include sulfur (S), phosphorus (P), and chlorine (Cl). Elements in higher periods, such as xenon (Xe) and radon (Rn), can also exceed the octet rule but are relatively rare in organic chemistry.

It is important to note that not all atoms follow the octet rule, and some can have fewer than eight electrons in their valence shell due to their unique electronic configurations.

To know more about  octet rule refer to-

https://brainly.com/question/865531

#SPJ11

The most probable number (MPN) for this sample can be calculated using the MPN table. Based on the results provided, the MPN for this sample is estimated to be 48 per 100 mL.

The MPN method is a statistical approach used to estimate the concentration of microorganisms in a sample. It involves inoculating multiple replicate tubes with different volumes of the sample and observing growth after a specified period of time. The results are then used to estimate the most probable number of microorganisms in the original sample.

In this case, the results of the test indicate that 3 out of 10 ml tubes, 2 out of 1 ml tubes, and 1 out of 0.1 ml tubes were positive for the presence of microorganisms. Based on these results, the MPN for the sample can be estimated using the MPN table. Using the MPN table, we can determine that the number of positive tubes corresponds to a probability of 0.048. Therefore, the MPN for this sample is estimated to be 48 per 100 mL.

This means that there are likely 48 microorganisms present in every 100 mL of the sample. It's worth noting that the MPN method provides an estimate of the concentration of microorganisms in a sample and is subject to some degree of uncertainty. However, it is a widely used method for assessing the microbiological quality of water and other environmental samples.

To know more about the Tube, here

https://brainly.com/question/15720257

#SPJ4

The Arrhenius model of acids and bases is limited because it only considers substances that produce hydrogen ions (H⁺) or hydroxide ions (OH⁻) in water as acids or bases, respectively.

Many substances can exhibit acidic or basic properties without producing H⁺ or OH⁻ ions in water. For example, ammonia (NH₃) can act as a base by accepting a proton (H⁺) from an acid, but it does not produce OH⁻ ions in water.

Similarly, substances like aluminum chloride (AlCl₃) can act as an acid by donating a proton (H⁺) to a base, but it does not produce H⁺ ions in water. Therefore, the Arrhenius model fails to explain the acidic or basic properties of such substances that do not fit into the narrow definition of an acid or a base.

This limitation led to the development of other acid-base models like the Bronsted-Lowry model and the Lewis model, which provide a more comprehensive understanding of acid-base behavior.

To know more about Arrhenius model, refer here:

https://brainly.com/question/10202161#

#SPJ11

Answer: 64 I think

Explanation:

unsure of wether or not there is a specific shape given but the original equation for volume is length x width x height so just multiply all..

4 x 4 = 16

16 x 4 = 64

The number of calories in 3 grams of peanuts, based on the given data, is approximately 10.88 calories. The correct answer is (c) 10.88 cal.

To calculate the number of calories in 3 grams of peanuts, we need to use the data collected from the experiment and apply the following formula:

calories = (mass of substance burned × specific heat of water × temperature change of water) ÷ volume of water

We are given that the mass of peanut burned was 0.75 g, the volume of water heated was 50 mL, and the temperature change of water was 14.5 °C.

The specific heat of water is 1 calorie per gram per degree Celsius (1 cal/g°C).

Substituting the given values into the formula, we get:

calories = (0.75 g × 1 cal/g°C × 14.5 °C) ÷ 50 mL

calories = 10.88 cal

to know more about calories refer here:

https://brainly.com/question/29096838#

#SPJ11

The energy of a rogue wave with an amplitude of 15 meters is 2,207,250 joules.

To do this, we need to use the following terms: potential energy, kinetic energy, and wave energy. Here's the step-by-step explanation:

1. Determine the amplitude (A) of the rogue wave: In this case, the amplitude is given as 15 meters.

2. Calculate the potential energy (PE):

The potential energy of a wave is given by the formula PE = (1/2)ρgA², where ρ is the density of water (approximately 1000 kg/m³), g is the acceleration due to gravity (9.81 m/s²), and A is the amplitude. Plugging in the values, we get PE = (1/2) * 1000 * 9.81 * (15)² = 1,103,625 J (joules).

3. Calculate the kinetic energy (KE): The kinetic energy of a wave is equal to its potential energy, so KE = 1,103,625 J.

4. Calculate the total wave energy (E): The total energy of a rogue wave is the sum of its potential and kinetic energy, E = PE + KE = 1,103,625 + 1,103,625 = 2,207,250 J.

So, the energy of a rogue wave with an amplitude of 15 meters is 2,207,250 joules.

To know more about rogue wave refer here: https://brainly.com/question/28913173#

#SPJ11

Answer:

1)b

2)c

3)e

4)d

5)a

6)b

7)a

8)e

9)c

10)e

11)b

12)d

13)d

14)d

15)d

Answer:

B. Single replacement

The rate of production of the final product is 0.3 t/h, and the composition of the final product is approximately 12.5% alcohol and 12% water, with no inert material present.

In an ethanol plant, the distillation process separates alcohol from corn. With a feed rate of 2.0 tons per hour, the bottoms waste contains 85% of the feed, while the final product is obtained from condensing and cooling the vapor.

To determine the rate of production of the final product and its composition, we need to calculate the mass flow rate of the final product and the composition of the final product.

Given:

Feed rate = 2.0 t/h

Composition of feed:

Alcohol: 15%

Water: 82%

Inert material: (100% - 15% - 82%) = 3%

Bottoms composition:

Water: 94%

Inert material: 3.5%

Alcohol: 2.5%

To calculate the rate of production of the final product, we need to subtract the mass of bottoms produced from the feed rate:

Rate of production of the final product = Feed rate - Mass of bottoms

Mass of bottoms = Feed rate × Bottoms composition = 2.0 t/h × 85% = 1.7 t/h

Rate of production of the final product = 2.0 t/h - 1.7 t/h = 0.3 t/h

Therefore, the rate of production of the final product is 0.3 tons per hour.

To calculate the composition of the final product, we need to consider the remaining components after removing the bottoms:

Composition of final product:

Alcohol: 15% - 2.5% = 12.5%

Water: 82% - 94% = 12%

Inert material: 3% - 3.5% = -0.5% (Assuming a negative value means there is no inert material remaining)

Therefore, the composition of the final product is approximately:

Alcohol: 12.5%

Water: 12%

No inert material

Please note that the negative value for the inert material indicates that there is no inert material present in the final product.

To know more about the ethanol plant refer here :

https://brainly.com/question/15646255#

#SPJ11

0.0228 mol/kg is the molality of a solution containing 4. 0 grams of NaCl dissolved in 3000 grams of water.

To calculate the molality of a solution, we need to first convert the mass of the solute (NaCl) to moles and then divide by the mass of the solvent (water) in kilograms.

The molar mass of NaCl is 58.44 g/mol, so 4.0 grams of NaCl is equal to 0.0684 moles of NaCl.

The mass of water is 3000 grams or 3.0 kg.

Therefore, the molality of the solution is:

molality = moles of solute / mass of solvent in kg

molality = 0.0684 moles / 3.0 kg

molality = 0.0228 mol/kg

So the molality of the solution is 0.0228 mol/kg.

To know more about the molality refer here :

https://brainly.com/question/4580605#

#SPJ11

They are all describing events that can occur in a baseball game, where a pitcher is throwing a ball to a batter and an umpire is calling the result of the play.

None of the scenarios involve a chemical reaction between reactant A and B. They all describe events in a baseball game. A chemical reaction involves a change in the chemical composition of one or more substances, resulting in the formation of new substances with different properties. In the scenarios described, there is no mention of any substances undergoing a chemical change, so no chemical reaction is occurring.

In all the scenarios described, there is no indication of any chemical reaction occurring between any reactants. All the scenarios are related to the sport of baseball, in which a pitcher throws a ball (the reactant) towards the batter who tries to hit the ball with a bat. The umpire is responsible for making calls, determining if the ball is a strike, a foul ball, or a home run based on the specific rules of the game.

To know more about the Pitcher, here

https://brainly.com/question/4519189

#SPJ4

The pH of a solution of a weak acid H₂CO₃ (carbonic acid) which is 1. 2 x 10⁻⁵ M is 5.64.

The pH of this weak acid when 1. 0 x 10⁻⁴ M NaHCO₃ is added to it is 9.53.

To find the pH of a solution of weak acid H₂CO₃ with a concentration of 1.2 x 10⁻⁵ M, we can use the equation for the acid dissociation constant (Ka) of H₂CO₃:

Ka = [H+][HCO₃⁻]/[H₂CO₃]

We know that the Ka value for H₂CO₃ is 4.3 x 10⁻⁷, and we can assume that the concentration of HCO₃⁻ is equal to the concentration of H⁺ since it is a weak acid. Therefore, we can simplify the equation to:

4.3 x 10⁻⁷ = [H⁺]² / 1.2 x 10⁻⁵

Solving for [H⁺], we get:

[H⁺] = 3.3 x 10⁻⁴ M

To find the pH, we can use the equation:

pH = -log[H⁺]

So, the pH of the solution before adding NaHCO₃ is:

pH (before) = -log(3.3 x 10⁻⁴) = 5.64

When 1.0 x 10⁻⁴ M of NaHCO₃ is added to the solution, it reacts with the H⁺ ions and forms more HCO₃⁻ ions, causing a shift in the equilibrium. The reaction is:

NaHCO₃(aq) + H⁺ → Na⁺(aq) + H₂CO₃(aq)

The addition of NaHCO₃ increases the concentration of HCO₃⁻ and decreases the concentration of H₂CO₃, which causes the equilibrium to shift to the left. This results in a decrease in [H⁺] and an increase in pH.

To find the pH after adding NaHCO₃, we need to calculate the new concentrations of H+ and HCO₃⁻ using an ICE table. Assuming that the initial concentration of H₂CO₃ does not change significantly, we can set up the table as follows:

                     H₂CO₃(aq) + H₂O(l) ⇌ H₃O⁺(aq) + HCO₃⁻(aq)
Initial:              1.2 x 10⁻⁵ M   0 M         0 M          0 M
Change:             -x                -x             +x            +x
Equilibrium:    1.2 x10⁻⁵ - x    0 - x          x              x

Since the initial concentration of H₂CO₃ is much larger than the amount of H⁺ that will be consumed by the reaction, we can assume that x is negligible compared to the initial concentration. Therefore, we can simplify the expression to:

[H⁺] ≈ x = [HCO₃⁻]

Using the equilibrium expression for the dissociation of HCO₃⁻, we can find the new [HCO₃⁻] concentration:

Ka = [H⁺][CO₃-2]/[HCO₃⁻]
4.3 x 10⁻⁷ = x2 / (1.2 x 10-5 + x)
x = 2.4 x 10⁻⁴ M

Therefore, the new [H⁺] and [HCO₃⁻] concentrations are both 2.4 x 10⁻⁴ M.

The new pH can be calculated using the same equation as before:

pH (after) = -log(2.4 x 10⁻⁴) = 9.53

So, the pH of the solution increases from 5.64 to 9.53 after adding NaHCO₃.

Learn more about weak acid at https://brainly.com/question/24018697

#SPJ11

the answers to the questions based on the element sodium:

Is it metal? - Yes

Is it a non-metal? - No

Is it gas at room temperature? - No

Is it a solid at room temperature? - Yes

Is it a liquid at room temperature? - No

Is it in the first row (period) of the periodic table? - No

Is it in the second row (period) of the periodic table? - Yes

Is it in the third row (period) of the periodic table? - No

Is it in the fourth row (period) of the periodic table? - No

Is it in the fifth row (period) of the periodic table? - No

Is it in the sixth row (period) of the periodic table? - No

Is it in the seventh row (period) of the periodic table? - No

Is it in the eighth row (period) of the periodic table? - No

Is it a noble gas? - No

Is it a halogen? - No

Is it an alkali metal? - Yes

Is it an alkaline earth metal? - No

Is it a transition metal? - No

Does its symbol start with the letter "C"? - No

Does it have an atomic number greater than 50? - No (Sodium has an atomic number of 11)

Periodic Table 20 Questions" is a game where one player thinks of an element from the periodic table, and the other player asks up to 20 yes or no questions to guess the element.

The questions are usually related to the element's properties, such as its atomic number, symbol, group, or period, as well as its physical and chemical characteristics.

learn more about the Periodic table here

https://brainly.com/question/15987580

#SPJ1

the question is incomplete. complete question is

The element is sodium(Na)

Is it metal? - Yes or No

Is it a non-metal? - Yes or No

Is it gas at room temperature? - Yes or No

Is it a solid at room temperature? - Yes or No

Is it a liquid at room temperature? - Yes or No

Is it in the first row (period) of the periodic table? - Yes or No

Is it in the second row (period) of the periodic table? - Yes or No

Is it in the third row (period) of the periodic table? - Yes or No

Is it in the fourth row (period) of the periodic table? - Yes or No

Is it in the fifth row (period) of the periodic table? - Yes or No

Is it in the sixth row (period) of the periodic table? - Yes or No

Is it in the seventh row (period) of the periodic table? - Yes or No

Is it in the eighth row (period) of the periodic table? - Yes or No

Is it a noble gas? - Yes or No

Is it a halogen? - Yes or No

Is it an alkali metal? - Yes or No

Is it an alkaline earth metal? - Yes or No

Is it a transition metal? - Yes or No

Does its symbol start with the letter "C"? - Yes or No

Does it have an atomic number greater than 50? - Yes or No

310.56 grams of sodium sulfate will be formed if you start with 175.0 grams of sodium hydroxide and have an excess of sulfuric acid.

To determine how many grams of sodium sulfate will be formed starting with 175.0 grams of sodium hydroxide and an excess of sulfuric acid, follow these steps:

1. Write the balanced chemical equation: 2 NaOH + H2SO4 → Na2SO4 + 2 H2O

2. Calculate the molar mass of sodium hydroxide (NaOH): (22.99 g/mol for Na) + (15.99 g/mol for O) + (1.01 g/mol for H) = 40.00 g/mol

3. Calculate the moles of sodium hydroxide (NaOH): 175.0 g / 40.00 g/mol = 4.375 moles

4. Determine the mole ratio between sodium hydroxide (NaOH) and sodium sulfate (Na2SO4): From the balanced equation, 2 moles of NaOH react to produce 1 mole of Na2SO4.

5. Calculate the moles of sodium sulfate (Na2SO4) produced: (4.375 moles NaOH) x (1 mole Na2SO4 / 2 moles NaOH) = 2.1875 moles Na2SO4

6. Calculate the molar mass of sodium sulfate (Na2SO4): (2 x 22.99 g/mol for Na) + (32.07 g/mol for S) + (4 x 16.00 g/mol for O) = 142.04 g/mol

7. Calculate the mass of sodium sulfate (Na2SO4) formed: (2.1875 moles Na2SO4) x (142.04 g/mol) = 310.56 grams

Therefore, 310.56 grams of sodium sulfate will be formed if you start with 175.0 grams of sodium hydroxide and have an excess of sulfuric acid.

To know more about sodium sulfate refer here: https://brainly.com/question/14464099#

#SPJ11

The resultant pressure after heating the ideal gas to 619 K is approximately 2.17 atm.

To find the resultant pressure of the ideal gas after being heated, we can use the Ideal Gas Law formula, which is:

PV = nRT

where P is pressure, V is volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin. Since the volume is constant, we can compare the initial and final states of the gas using the following equation:

P1/T1 = P2/T2

Given the initial conditions: P1 = 0.96 atm, T1 = 273 K, and the final temperature T2 = 619 K. We need to find the final pressure P2.

0.96 atm / 273 K = P2 / 619 K

Now, solve for P2:

P2 = (0.96 atm * 619 K) / 273 K

P2 ≈ 2.17 atm

Therefore, the resultant pressure after heating the ideal gas to 619 K is approximately 2.17 atm.

Know more about Ideal Gas here:

https://brainly.com/question/31463642

#SPJ11

The correct answer to the first question is A) A potential map marks the edges of the molecules electron cloud. The electron cloud is smallest around the H in LiH, because that H has less electrons around it than the Hs in the other molecules.

This is because LiH is an ionic compound, and the electron from the hydrogen atom in LiH is pulled towards the Li+ ion, making the hydrogen atom partially positively charged and the Li+ ion partially negatively charged.

As a result, the electron cloud around the hydrogen atom is smaller compared to the other molecules.

The correct answer to the second question is HF. This is because fluorine is the most electronegative element among the given options, and the hydrogen atom in HF is partially positively charged.

As a result, it can attract a negatively charged molecule more strongly compared to the other options.

Visit here to learn more about electron cloud brainly.com/question/28930500

#SPJ11

The oxidation states exhibited by C, Si, Ge, Sn, Pb are -4, +4, +2 or +4, +2 or +4, and +2 or +4, respectively.

The oxidation state, also known as the oxidation number, is a measure of the degree of oxidation of an atom in a chemical compound. The oxidation state can be determined by assigning electrons to each atom in a compound according to a set of rules.

In general, carbon (C) exhibits an oxidation state of -4 in compounds such as methane (CH₄), where it is bonded to four hydrogen atoms. Carbon can also exhibit positive oxidation states in compounds such as carbon dioxide (CO₂), where it is bonded to two oxygen atoms, and in carbonyl compounds, where it is bonded to a metal.

Silicon (Si), germanium (Ge), tin (Sn), and lead (Pb) all belong to the same group in the periodic table and therefore exhibit similar chemical properties. They can all exhibit positive oxidation states of +2 and +4. For example, silicon can exhibit an oxidation state of +4 in silicon dioxide (SiO₂) and +2 in silane (SiH₄). Germanium, tin, and lead also exhibit a similar range of oxidation states in their compounds.

To know more about oxidation states, refer here:

https://brainly.com/question/31688257#

#SPJ11

The remaining amount of the radioactive element, after 80.0 weeks with a half-life of 20.0 weeks, is 0.0625 grams. Thus, the correct answer is с) 0.0625 g.

To solve the problem, we need to calculate the remaining amount of the radioactive element after 80.0 weeks, given a half-life of 20.0 weeks.

We can use the formula: [tex]\text{Remaining amount} = \text{Initial amount} \times \left(\frac{1}{2}\right)^{\frac{\text{time elapsed}}{\text{half-life}}}[/tex]

Plugging in the values, we get:

[tex]\text{Remaining amount} = \text{Initial amount} \times \left(\frac{1}{2}\right)^{\left(\frac{80.0 \text{ weeks}}{20.0 \text{ weeks}}\right)}[/tex]

Simplifying the exponent, we have:

[tex]\text{Remaining amount} = \text{Initial amount} \times \left(\frac{1}{2}\right)^{\frac{\text{elapsed time}}{\text{half-life}}}[/tex]

Calculating[tex]\left(\frac{1}{2}\right)^4[/tex], we get:

[tex]\text{Remaining amount} = 1 , \text{gram} \times \frac{1}{16}[/tex]

Therefore, the remaining amount of the element after 80.0 weeks is 1/16 gram, which is equal to (c) 0.0625 grams.

To know more about the half-life refer here :

https://brainly.com/question/24710827#

#SPJ11

Based on the balanced chemical equation provided, the combustion of 675 grams of oxygen gas (O₂) will produce 275.1 grams of water (H₂O) in the form of steam. Therefore, 275.1 grams of steam are produced when 675 grams of oxygen gas combust.

To determine how many grams of steam are produced when 675 grams of oxygen gas combust, we'll use the balanced equation you provided: 2C₈H₁₈ (l) + 25O₂ (g) --> 16CO₂ (g) + 18H₂O (g).

Step 1: Calculate the molar mass of O₂ and H₂O.
O₂: 16.00 g/mol * 2 = 32.00 g/mol
H₂O: (1.01 g/mol * 2) + 16.00 g/mol = 18.02 g/mol

Step 2: Calculate the moles of oxygen (O₂) in the 675 grams of oxygen gas.
moles of O₂ = 675 g / 32.00 g/mol = 21.09375 mol

Step 3: Use the stoichiometry from the balanced equation to find the moles of H₂O (steam) produced.
(18 mol H₂O / 25 mol O2) * 21.09375 mol O₂ = 15.271125 mol H2O

Step 4: Convert moles of H₂O to grams.
grams of H₂O = 15.271125 mol * 18.02 g/mol = 275.097895 g

So, approximately 275.1 grams of steam are produced when 675 grams of oxygen gas combust.

Learn more about combustion at https://brainly.com/question/23992512

#SPJ11