help help help help help help​

Answer:

The concentration is 0.065g/mL

Explanation:

Given

[tex]m = 13g[/tex] --- mass of salt

[tex]V =200mL[/tex] --- volume of water

Required

Determine the concentration (C)

This is calculated as:

[tex]C = \frac{m}{V}[/tex]

[tex]C = \frac{13g}{200mL}[/tex]

[tex]C = \frac{13}{200}g/mL[/tex]

[tex]C = 0.065g/mL[/tex]

The concentration is 0.065g/mL

Stomach ache, gassy ,no appetite is related to problems with digestive tract while sneezing all the time, runny nose is related to respiratory system while having a very hard time remembering people's is related to nervous system while seeming to be catching every disease that comes around,taking a long time to get better is related to immune system.

It consists of the gastrointestinal tract along with the accessory organs which are present in digestion process . It involves the breakdown of complex food into smaller components which can be easily assimilated and absorbed by the body.

The digestion process has 3 phases: cephalic phase , gastric phase and intestinal phase.Cephalic phase begins with secretion of gastric juices from gastric glands in response to sight and smell of food.It involves chewing and chemical breakdown of food by the action of digestive enzymes ,saliva in the mouth contain enzymes like lipase and amylase which are secreted by the salivary and serous glands present on the tongue.

Learn more about digestive tract,here:

https://brainly.com/question/28163067

#SPJ1

There is 5 orbitals!

Please mark me brainliest, and have a wonderful day!

Answer:

m = 16.67 g of Hg

Explanation:

Let's write the overall decomposition reaction that is taking place:

2HgO ---------> 2Hg + O₂

According to the balanced reaction, we can see that the mole ratio between HgO and Hg is the same (2:2 or 1:1), therefore, we can assume that the moles reactants of HgO would be the moles produced of Hg. So, in order to get the grams of mercury, we need to determine the moles first.

To get the moles, we need to use the following expression:

moles = mass / MM   (1)

The molar mass of HgO can be calculated using the atomic weights, which are:

Hg: 200.59 g/mol ; O: 15.999 g/mol

MM HgO = 200.59 + 15.999 = 216.589 g/mol

The moles are:

moles HgO = 18 / 216.589 = 0.0831 moles

As we stated before, moles reactants are the same moles produced, so:

moles HgO = moles Hg = 0.0831 moles of Hg.

Finally, to get the mass, we just solve the mass from (1):

m = moles * MM   (2)

m = 0.0831 * 200.59

Hope this helps

Answer:

decomposition reaction

Answer:

4 g

Explanation:

First you need to write a balanced chemical equation. You are given thatmethane is burned, meaning a combustion reaction in which carbon dioxide and water are released.

Unbalanced: CH4 + O2 ---> CO2 + H2O

Balanced: CH4 + 2O2 ---> CO2 + 2H2O

Givens:

X grams CH4 (Molecular mass 16.0 grams)

9 grams H2O (Molecular mass 18.0 grams)

11 grams CO2 (Molecular mass 44.0 grams)

Mole ratio: 1:2:1:2 (CH4:O2:CO2:H2O)

Then you need to find which of the reactants are the limiting reactant and which is the excess reactant. The limiting reactant is what you will base the rest of the problem on. To do this, you convert each measurement to moles from grams.

11 g CO2 / (44.0 g) = 0.25 moles CO2

9 g H2O / (18.0 g) = 0.5 moles

n of CH4 = n of CO2 = n of H2O /2 = 0.25 moles

m of CH4 = n* Mw = 0.25 * 16.0 = 4 g

The size of an ion is determined by its atomic radius, which is a measure of the size of the atom from which the ion is formed. The atomic radius of an atom is generally determined by the size of its electron cloud. The size of the electron cloud is influenced by the number of electrons and the energy levels they occupy.

Of the ions given, Li+ has the smallest atomic radius because it has the smallest number of electrons and the highest effective nuclear charge, which means that its electrons are held more closely to the nucleus. Na+, K+, and CS+ have larger atomic radii than Li+ because they have more electrons and lower effective nuclear charges, which means that their electrons are held more weakly by the nucleus.

Therefore, the answer is CS+ has the largest radius.

The correct answer is : Nitrogen's molecule bends into a trigonal pyramidal shape due to the presence of one lone pair of electrons

O eg=tetrahedral, mg=trigonal pyramidal

The electron geometry (eg) of NCl3 is determined by the positions of the electrons around the central atom, nitrogen (N). NCl3 has one lone pair of electrons on nitrogen and three bonding pairs of electrons with chlorine atoms, so the electron geometry is tetrahedral. NCl3's molecular geometry (mg) is determined by the atom positions in the molecule. In a trigonal pyramidal shape, NCl3 has one nitrogen atom in the centre and three chlorine atoms surrounding it. Nitrogen's molecule bends into a trigonal pyramidal shape due to the presence of one lone pair of electrons. Electron geometry, also known as electron pair geometry, is the arrangement of electron pairs in a molecule or ion around a central atom. It is determined by the number of electron pairs surrounding the central atom, which includes both bonding pairs and lone electron pairs. The electron geometry can be used to predict the overall shape of a molecule or ion and also helps to understand the polarity of the molecule.

To learn more about electron geometry  here:

https://brainly.com/question/7558603

#SPJ4

Answer:

C- It has been examined, tested and supported over centuries.

Explanation:

The conservation of mass is a scientific law that states that matter cannot be created or destroyed, only transformed from one form to another. This law has been extensively tested and supported over centuries of scientific investigation, and it is considered to be a fundamental principle of chemistry and physics.

Simple Lewis dot structures make it easy to see how many valence electrons are present in an atom. Valence electrons are shown as dots surrounding the atom that are organized in pairs in Lewis dot formations.

Electron spin direction is displayed using arrow and line diagrams, along with each orbital. The electron configuration of atoms is shown using arrow and line diagrams or orbital diagrams, which use boxes and arrows to indicate the different orbitals and the pairing arrangement of electrons. This model has the benefit of displaying each orbital as well as the electrons' spin polarity.

Written electron configurations are concise and also depict how the electrons are distributed throughout the sublevels. The number of electrons in a specific sublevel is indicated by superscripts in written electron configuration notation. Written electronic configuration has the advantage of being more compact due to the removal of boxes and arrows. It also displays how electrons are distributed among sublevels.

The arrangement of electrons within an atom's orbitals, shells, and subshells is known as electron configuration.

To know more about electron configuration click here

https://brainly.com/question/29757010

#SPJ4

Answer:

Dot structures make it easy to count electrons and they show the number of electrons in each electron shell.

Arrow and line diagrams show the spin of electrons and show every orbital.

Written configurations require minimal space and show the distribution of electrons between subshells.

Explanation:

correct on edg 2023

The amount, in moles in 28 grams of [tex]UO_2[/tex] would be 0.1037 mol.

The mole of a substance is the ratio of the mass of the substance and the molar mass of the substance. This can be mathematically expressed as:

Mole = mass/molar mass

Molar mass of [tex]UO_2[/tex] = 238 + (16x2) = 270 g/mol

Thus, the number of moles in 28 grams of [tex]UO_2[/tex] would be:

Mole = 28/270 = 0.1037 mol

In other words, the number of moles in 28 grams of [tex]UO_2[/tex] would be 0.1037 mol.

More on moles determination can be found here: https://brainly.com/question/14256491

#SPJ1

How many moles in 28 grams of UO2?

If there are 6 atoms of hydrogen on the products side, then there would be 6 atoms of hydrogen also on the reactants side. That would be 3 molecules of [tex]H_2[/tex].

According to the law of conservation of atoms or matter, atoms can neither be destroyed nor created during the course of chemical reactions. However, atoms can change forms during reactions.

Going by this law, it means the number of atoms of a particular element must remain constant before and after chemical reactions. Otherwise, we will say the chemical equation of such reactions are not balanced.

Thus, if there are 6 atoms of hydrogen on the products side of a reaction, 6 atoms of hydrogen must also be on the reactants side of the reaction. A molecule of hydrogen, [tex]H_2[/tex], has 2 atoms of hydrogen. This means 3 molecules of hydrogen must be on the reactants side in order to have a total of 6 hydrogen atoms.

More on law of conservation of atoms can be found here: https://brainly.com/question/2175724

#SPJ1

The main function of the meter rule is to measure the distance between the two points , it is use to measure the length.

The first unit of the length is the meter. the length is defined as the distance between the two points.  the meter is used to measure the length in the international system of the units. the instrument used to measure the meter is the meter rule or the meter stick. the mete rule is also called as the ruler. before the meter rule of discovery we use the primitive methods to measure the distance.

Thus, the function of the meter is the to measure the distance between the two points.

To learn more about meter here

https://brainly.com/question/17687457

#SPJ4

9.03 liters of carbon dioxide gas would contain 0.40 moles of carbon dioxide molecules. Since 1 mole of any gas contains 6.02 x 10^23 molecules, the number of molecules of carbon dioxide gas in 9.03 liters of carbon dioxide gas at STP would be 2.41 x 10^23 molecules.

Molecules are the smallest units of matter that can exist by themselves. They are composed of two or more atoms that are held together by chemical bonds. Molecules can be found in the air we breathe, the water we drink, and the food we eat. They can also be found in living organisms, like plants and animals. Molecules can be made of a variety of different atoms, such as oxygen, carbon, nitrogen, and hydrogen.

To learn more about molecules

https://brainly.com/question/26044300

#SPJ1

Answer:

10.33 meters (33.78 feet).

Explanation:

1 bar = 10.33 mH₂O, 1 mH₂O = 0.098 bar, hence 10.33 mH₂O/0.098 bar = 10.33 m.

Answer:

in the lead strip the will be no change and no reaction. this is job salvation that is made when magnesium powder and lead to our heater together

Two solitary sigma bonds are visible in the Lewis structure between the hydrogen and oxygen atoms.

The octet rule is a theory that describes how atoms share electrons so that each atom has eight electrons in its outer shell. This idea is the foundation of a Lewis structure. An oxygen atom, as an illustration, has six electrons in its outer shell.

The entire molecule's electron density is concentrated only around the core C in the CCl4 Lewis structure. Two nitrogen atoms are connected by a triple bond in the N2 Lewis structure.

In the reaction described above, PH3 is acting as a Lewis base because of the single electron on the P atom.

A double bond exists between two oxygen atoms in the Lewis structure of O2. Oxygen atoms must form two bonds in order to comply with the octet rule. The oxygen (red) and hydrogen (white) atoms are held together by powerful connections known as covalent bonds.

To learn more about Lewis structure refer to:

https://brainly.com/question/20300458

#SPJ1

2.87 g of silver chloride can be made by reacting 200.0 mL of calcium chloride with 170.0 mL of silver nitrate, both of which have a 0.23 M silver nitrate concentration. Chemically, silver chloride is a substance.

AgCl is the chemical formula for this. It is generally known that this white crystalline substance is only weakly soluble in water. Silver chloride changes from grey to black or purplish in hue upon illumination or heating, indicating the presence of silver. As the mineral chlorargyrite, AgCl can be found in nature. Chemical processes take place everywhere around us, from the food our bodies metabolize to how the sunlight we receive is produced.

silver chloride mass: m (AgCl)=0.02*143,32g/mole=2.87 g, where n (AgCl) = (0.02*2)/2=0.02 moles.

Learn more about silver chloride here

https://brainly.com/question/12912140

#SPJ4

16.5 g is the mass of sodium chloride that must be dissolved in the same mass of X to produce the same depression at freezing point.

Avogadro's number (6.022 x 1023) of molecules (or formula units) make up one mole of a substance (ionic compound). The mass of 1 mole of a chemical is indicated by its molar mass. It provides you with the number of grams per mole of a substance, to put it another way.

ΔT = Kc*W*i

Kc = cryoscopy constant of the solute X

W = molality of the solution

i = van't Hoff factor, For organic molecules, such as alanine, i = 1.

n = 45.8/89.09

n = 0.5141 mol

W = 0.5141/1.2 = 0.4284 mol/kg

So, Kc of X is:

4.10 = Kc*0.4284*1

Kc = 9.57 °C.kg/mol

So, if now sodium chloride is added to X, and the temperature change is the same, and i = 1.82:

4.10 = 9.57*W*1.82

W = 0.2354 mol/kg

The number of moles of the solute is then:

W = n/1.2

0.2354 = n/1.2

n = 0.2825 mol

The molar mass of sodium chloride is 58.44 g/mol, thus the mass is the molar mass multiplied by the number of moles:

m = 58.44*0.2825

m = 16.5 g

To know more about cryoscopy constant visit:

brainly.com/question/29908903

#SPJ4

459.1 g of aspartame has a 1.56 moles of aspartame.

Artificial sweetener aspartame is potent and low in calories. About 200 times sweeter than sugar, it is a white, odourless powder. It is legal to use in Europe as a tabletop sweetener, an energy-reducing food ingredient in beverages, desserts, and sweets, dairy products, chewing gum, and other foods.

Aspartame is a dipeptide that is created through the formal condensation of the amino group of methyl L-phenylalaninate with the alpha-carboxy group of L-aspartic acid.

Here, aspartame has 1.56 moles.

Molar mass of aspartame = 294.40 g/mol

So, Number of moles of aspartame = [tex]\frac{Given Mass}{Molar Mass}[/tex]

Mass of aspartame = Number of moles × Molar mass

or, mass = 1.56 × 294.3

or, mass = 459.1 g

Hence, Mass of aspartame of 1.56 moles of aspartame is 459.1 g.

To know more about aspartame from the link

brainly.com/question/10361394

#SPJ4

Answer:

there is no paragraph

Explanation:

The option that can lead to deviations from Beer's law at constant path length is option A.

Using monochromatic radiation All radiation that was not absorbed by his sample when stray light reaches the detector is transmitted to the detector.

All of the above factors can lead to deviations from Beer's Law if the path length is constant. Optical pathlength refers to the distance that light travels through a sample and is usually kept constant in spectrophotometric experiments in order to accurately measure the sample's absorbance.

Therefore, unless monochromatic radiation is used, the absorbance of the sample may not accurately reflect the concentration of the solute, as different wavelengths of light may be absorbed differently.

For more information on Beer's Law kindly visit to

https://brainly.com/question/18591932

#SPJ4

Answer: Hot water freezes faster.

Explanation: It is because of the Mpemba effect taking place, and even though it seems impossible, it could have less dissolved gas in it, or even take up less mass because of this.

The fraction of cobalt-60 atoms remaining after 26.5 years is approximately 0.25 (1/4).

An atom is the smallest unit of matter that still retains its properties. It consists of a nucleus, which is made up of protons and neutrons, surrounded by electrons that orbit the nucleus. Atoms are the building blocks of all matter and can combine to form molecules. Atoms are also constantly in motion and can be found in everything from air to rocks. They are essential for life, as they make up all the molecules that form the cells and organs in the human body.

To learn more atom
https://brainly.com/question/6258301
#SPJ4

The percent yield for the reaction in this example is 100%, which is equal to the theoretical yield of NaBr from 2.36 mol FeBr3 of 7.08 mol NaBr.

The lesser amount, or 13.7 g NaBr, represents the potential yield. 15.45 grams of NaBr can never be produced because after 13.7 grams of NaBr are created, the reaction runs out of NaI and stops generating NaBr product. As the limiting reactant, NaI is well-known.

The final answer is expressed in percent by dividing the experimental yield by the theoretical yield and multiplying the result by 100. In general, the percent yield value is less than 100%,

To know more about theoretical yield visit:-

https://brainly.com/question/14966377

#SPJ1

Answer: 87%.

Explanation:

Answer:

a

Explanation:

boiling point of 111ºC and hexane, with a boiling point of 69ºC, is 42ºC, making these two substances most easily separated