HELP ME PLS IM BEGGING

HELP ME PLS IM BEGGING

Answers

Answer 1

Given c = 10.5, m∠A = 30, and m∠B = 52, we can use the Law of Sines to find b. Rounded to the nearest tenth, b ≈ 8.0.

Given b = 20, a = 26, and m∠A = 65, we can use the Law of Sines to find m∠B. Rounded to the nearest tenth, m∠B ≈ 47.5.

Given a = 125, m∠A = 42, and m∠B = 65, we can use the Law of Sines to find c. Rounded to the nearest tenth, c ≈ 154.3.

Given c = 18.4, m∠B = 35, and m∠C = 52, we can use the Law of Sines to find a. Rounded to the nearest tenth, a ≈ 10.5.

Given a = 12.5, m∠A = 50, and m∠B = 65, we can use the Law of Sines to find b. Rounded to the nearest tenth, b ≈ 15.2.

1)To find the length of side b, we can use the Law of Sines. The formula is:

b/sin(B) = c/sin(C)

Plugging in the given values:

b/sin(52) = 10.5/sin(180 - 30 - 52)

Using the sine addition formula:

b/sin(52) = 10.5/sin(98)

Cross-multiplying:

b * sin(98) = 10.5 * sin(52)

Dividing both sides by sin(98):

b = (10.5 * sin(52)) / sin(98)

Calculating the value:

b ≈ 7.96

Rounded to the nearest tenth:

b ≈ 8.0

2)To find the measure of angle B, we can use the Law of Sines. The formula is:

sin(B)/b = sin(A)/a

Plugging in the given values:

sin(B)/20 = sin(65)/26

Cross-multiplying:

sin(B) = (20 * sin(65)) / 26

Taking the inverse sine:

B ≈ [tex]sin^{(-1)[/tex]((20 * sin(65)) / 26)

Calculating the value:

B ≈ 47.5

Rounded to the nearest tenth:

B ≈ 47.5

3)To find the length of side c, we can use the Law of Sines. The formula is:

c/sin(C) = a/sin(A)

Plugging in the given values:

c/sin(65) = 125/sin(42)

Cross-multiplying:

c * sin(42) = 125 * sin(65)

Dividing both sides by sin(42):

c = (125 * sin(65)) / sin(42)

Calculating the value:

c ≈ 154.3

Rounded to the nearest tenth:

c ≈ 154.3

4)To find the length of side a, we can use the Law of Sines. The formula is:

a/sin(A) = c/sin(C)

Plugging in the given values:

a/sin(35) = 18.4/sin(52)

Cross-multiplying:

a * sin(52) = 18.4 * sin(35)

Dividing both sides by sin(52):

a = (18.4 * sin(35)) / sin(52)

Calculating the value:

a ≈ 10.5

Rounded to the nearest tenth:

a ≈ 10.5

5)To find the length of side b, we can use the Law of Sines. The formula is:

b/sin(B) = a/sin(A)

Plugging in the given values:

b/sin(65) = 12.5/sin(50)

Cross-multiplying:

b * sin(50) = 12.5 * sin(65)

Dividing both sides by sin(50):

b = (12.5 * sin(65)) / sin(50)

Calculating the value:

b ≈ 15.2

Rounded to the nearest tenth:

b ≈ 15.2

Know more about Law of Sines    here:

https://brainly.com/question/30401249

#SPJ8

The complete question is :

Given the measures of AABC. answer the following question. Then round off answers to the nearest tenths.

1. If c = 10.5, m∠A = 30, m∠ B=52, find b.

2. If b=20, a = 26, m∠ A= 65, find m ∠ B.

3. If a = 125, m∠A=42, m ∠ B=65, find c.

4. If c= 18.4, m∠ B = 35, m ∠ C= 52, find a.

5. If a = 12.5, m∠A = 50, m∠ B = 65, find b


Related Questions

work out the circumference of a circle using 9m and round it to one decimal place

Answers

The circumference of the circle with a radius of 9m is 56.5 m.

We know that,

The circumference of a circle can be calculated using the formula:

C = 2πr ----- (1)

where,

C ⇒ circumference of the circle

r ⇒ radius of the circle

Now, as per the question:

The radius of the circle, r = 9m

Substitute the value of the radius into equation (1):

C = 2 × π × 9

Find the value to one decimal place:

C ≈ 56.5

Therefore, the circumference of a circle with a radius of 9m is approximately 56.5 meters.

Learn more about the circumference of the circle:

brainly.com/question/29504171

The correct question is:-

Find the circumference of the circle with a radius of 9m.

Given that y′=4x+y and y(0)=1. Use the Euler's method to approximate the value of y(0.5) by using five equal intervals. Correct your answer to 2 decimal places. 44. Suppose $5,000 is deposited into an account which earns continuously compounded interest. Under these conditions, the balance in the account grows at a rate proportional to the current balance. Suppose that after 4 years the account is worth $7,000. (a) How much is the account worth after 5 years? (b) How many years does it take for the balance to double?

Answers

(a) The account is worth approximately $7,768.77 after 5 years.

(b) It takes approximately 9.28 years for the balance to double.

(a) To determine the account balance after 5 years, we can use the continuous compound interest formula: A = P * e^(rt), where A is the final balance, P is the initial deposit, r is the interest rate, and t is the time in years. We are given that the initial balance is $5,000, and after 4 years, the balance is $7,000. Let's solve for the interest rate, r:

$7,000 = $5,000 * e^(4r)

Dividing both sides by $5,000:

e^(4r) = 1.4

Taking the natural logarithm of both sides:

4r = ln(1.4)

r ≈ 0.11157

Now we can calculate the balance after 5 years:

A = $5,000 * e^(0.11157 * 5)

A ≈ $7,768.77

(b) To find the time it takes for the balance to double, we need to solve the equation:

$10,000 = $5,000 * e^(0.11157 * t)

Dividing both sides by $5,000:

2 = e^(0.11157 * t)

Taking the natural logarithm of both sides:

0.11157 * t = ln(2)

t ≈ 9.28152 years

Therefore, it takes approximately 9.28 years for the balance to double.

For more questions like Interest click the link below:

https://brainly.com/question/13324776

#SPJ11

A 10m diameter cyclindrical storage contains 800m³ of oil (SG=0.85, v=2x10-³ m²/s). A 40cm diameter pipe, 70m long is attached at the bottom of the tank and has its discharge end 5.0m below the tank's bottom. A valve is located near the pipe's discharge end. Assuming the minor loss in the valve to be 35% of the velocity head in the pipe, determine the discharge in liters/second if the valve is fully opened. Assume laminar flow.

Answers

The given data is as follows:Diameter of the cylindrical tank, d = 10 m Volume of oil stored in the tank, V = 800 m³ Density of oil, SG = 0.85 Kinematic viscosity, v = 2 × 10⁻³ m²/s Diameter of the pipe attached, d₁ = 40 cm = 0.4 m Length of the pipe, L = 70 m

Finally, we determine the discharge Q in liters per second:Q = (π/8)×(0.4/2)⁴/(2 × 10⁻³ × 70)[ΔP/ρ]= 0.0003109 m³/s= 310.9 L/s

Height of the pipe from the bottom of the tank, h = 5 m Loss in the valve, K = 35% of velocity head Discharge through the pipe when valve is fully opened, We need to determine the discharge in liters/second if the valve is fully opened and assuming laminar flow. We can calculate the discharge Q from the formula for the volume flow rate through a pipe having laminar flow:Q = πr₁⁴/8vL[ΔP/ρ]Q = (π/8)×(d₁/2)⁴/vL[ΔP/ρ] We can determine the pressure difference ΔP between the top and bottom ends of the pipe using the Bernoulli's principle:(P/ρ) + (V²/2g) + h = constant, where P = pressure, ρ = density, V = velocity, g = acceleration due to gravity, and h = height difference.

(P/ρ) + h = constant V₁ = 0 at the top of the pipe, so (P/ρ) + h = V²/2g at the bottom of the pipe.

P₁ + ρgh = P₂ + (1/2)ρV²P₁ - P₂ = (1/2)ρV² - ρghΔP = (1/2)ρV² - ρgh

Substituting the given values,ρ = SG × ρw = 0.85 × 1000 = 850 kg/m³d = 10 m

⇒ r = d/2 = 5 mv = 2 × 10⁻³ m²/sL = 70 mh = 5 mK = 35% = 0.35g = 9.81 m/s²

We first determine the velocity V:V² = 2g(h - Kd₁/4) = 2 × 9.81 × (5 - 0.35 × 0.4/4) = 95.8551 m²/s² V = 9.7902 m/s

Next, we determine the pressure difference ΔP: ΔP = (1/2)ρV² - ρgh= (1/2) × 850 × 95.8551 - 850 × 9.81 × 5 = 33999.07 Pa

To know more about Diameter visit:

https://brainly.com/question/32968193

#SPJ11

A rectangular garden of area 208 square feet is to be surrounded on three sides by a brick wall costing $8 per foot and on one side by a fence costing $5per foot. Find the dimensions of the garden such that the cost of the materials is minimized.
To minimize​ costs, the length of the side with a fence should be enter your response here feet and the length of the other side should be enter your response here feet.

Answers

The length of the side with a fence should be 4√2 feet and the length of the other side should be 52/√2 feet.

Let us suppose the rectangular garden has length x and width y.We are to find the dimensions of the garden such that the cost of the materials is minimized.Cost of the brick wall surrounding the garden on three sides = 8(x+2y)

Cost of the fence on one side = 5xGiven the area of the rectangular garden is 208 sq feet, we can sayxy=208 or y=208/x.

We can now write the cost equation in terms of a single variable:

Cost = 8(x + 2(208/x)) + 5x

Cost = 8x + 416/x + 5x

= 13x + 416/x

Now, to minimize the cost, we need to take the derivative and find the critical points, so:

Cost' = 13 - 416/x²

= 0

Solving for x gives:13x² = 416x => x²

= 32x

= 4√2

So the dimensions of the rectangular garden that minimize cost is:x = 4√2 feet,

y = 52/√2 feet

The length of the side with a fence should be 4√2 feet and the length of the other side should be 52/√2 feet.

To know more about rectangular visit;

brainly.com/question/32444543

#SPJ11

1. Petroleum economic evaluation determined the A. Producible oil B. Production oil C. Developed oil D. Reserved oil 2. Capital expenditure is used in the calculation of before A. Net cash inflow B. Net cash outflows C. Tax cash flows D. Net cash flows

Answers

1. Petroleum economic evaluation determined the (A) Producible oil. The process of evaluating and interpreting the data gathered during oil exploration and production in order to determine the economic feasibility of an oil deposit is referred to as petroleum economic evaluation.

Petroleum economic evaluation may aid in determining the viability of an oilfield, the best drilling and production techniques to use, and the estimated volume of oil reserves that can be extracted from the field.

2. Capital expenditure is used in the calculation of before (B) Net cash outflows.

Capital expenditure is used in the calculation of net cash outflows.

Capital expenditure, commonly known as CapEx, is the amount of money a company spends to purchase or upgrade long-term assets such as buildings or equipment.

The cash outflows from capital expenditures are subtracted from cash inflows from operations to calculate net cash flows, which show the company's overall cash position.

Know more about Petroleum economic evaluation  here:

https://brainly.com/question/14094756

#SPJ11

A plot has a concrete path within its borders on all sides having uniform width of 4m. The plot is rectangular with sides 20m and 15m. Charge of removing concrete is Rs. 6 per sq.m. How much is spent

Answers

A total of Rs. 2064 would be spent on removing the concrete path.

To calculate the amount spent on removing the concrete path, we first need to find the area of the path.

The total area of the plot including the concrete path is:

Total Area = (20 + 2 * 4) * (15 + 2 * 4) square meters

= (28) * (23) square meters

= 644 square meters

The area of the plot without the concrete path is:

Plot Area = 20 * 15 square meters

= 300 square meters

Therefore, the area of the concrete path is:

Path Area = Total Area - Plot Area

= 644 - 300 square meters

= 344 square meters

The cost of removing concrete is given as Rs. 6 per square meter.

Hence, the amount spent on removing the concrete path is:

Amount spent = Path Area * Cost per square meter

= 344 * 6 Rs.

= 2064 Rs.

As a result, Rs. 2064 would be needed to remove the concrete path.

for such more question on area

https://brainly.com/question/15822332

#SPJ8

8. Using the graph below, what is the solution for the system of linear equations shown?
y=3x+8

y=3x-4

A. (8,-4)
B. Infinitely many solutions
C. (3, 3)
D. No solution

Answers

To find the solution for the system of linear equations y = 3x + 8 and y = 3x - 4, we can set the two equations equal to each other:

3x + 8 = 3x - 4

By subtracting 3x from both sides of the equation, we get:

8 = -4

However, this equation is not possible since 8 cannot be equal to -4. This means that there is no solution that satisfies both equations simultaneously.

Therefore, the correct answer is D. No solution.

A road at a constant RL of 180.00 runs North to South. The ground East to West is level. The surface levels along the centre line of the road are as follows: Chainage in meter: 0 30 60 90 120 150 180 Level in meter: 183.50 182.45 182.15 181.55 180.95 182.05 180.80 Compute the volume of cutting, given that the width at formation level is 8 m and the side. slopes 1 to 1. The centre depths of the cutting at 30 m intervals may be determined by 2 subtracting the formation from the respective ground levels.

Answers

The volume of cutting is 9002.4 cubic meters.

To compute the volume of cutting, w need to determine the depths of the cutting at 30 m intervals and calculate the area of the cross-section at each interval.
First, let's calculate the depths of the cutting at each interval by subtracting the formation level from the respective ground levels:
- At 0 m: Ground level - Formation level = 183.50 m - 180.00 m = 3.50 m
- At 30 m: Ground level - Formation level = 182.45 m - 180.00 m = 2.45 m
- At 60 m: Ground level - Formation level = 182.15 m - 180.00 m = 2.15 m
- At 90 m: Ground level - Formation level = 181.55 m - 180.00 m = 1.55 m
- At 120 m: Ground level - Formation level = 180.95 m - 180.00 m = 0.95 m
- At 150 m: Ground level - Formation level = 182.05 m - 180.00 m = 2.05 m
- At 180 m: Ground level - Formation level = 180.80 m - 180.00 m = 0.80 m
Next, let's calculate the area of the cross-section at each interval. Since the side slopes are 1 to 1, the cross-section will be trapezoidal in shape.
The formula for the area of a trapezoid is:
Area = (a + b) * h / 2
Where:
a = width at one end of the trapezoid
b = width at the other end of the trapezoid
h = height of the trapezoid (depth of the cutting at the given interval)
We know that the width at formation level is 8 m. Since the side slopes are 1 to 1, the width at the ground level will be 8 m + 2 * depth of the cutting at the given interval.
Let's calculate the area at each interval:
- At 0 m:
Width at ground level = 8 m + 2 * 3.50 m = 15 m
Area = (8 m + 15 m) * 3.50 m / 2 = 105 m²

- At 30 m:
Width at ground level = 8 m + 2 * 2.45 m = 13.90 m
Area = (8 m + 13.90 m) * 2.45 m / 2 = 49.77 m²

- At 60 m:
Width at ground level = 8 m + 2 * 2.15 m = 12.30 m
Area = (8 m + 12.30 m) * 2.15 m / 2 = 45.76 m²

- At 90 m:
Width at ground level = 8 m + 2 * 1.55 m = 11.10 m
Area = (8 m + 11.10 m) * 1.55 m / 2 = 28.53 m²

- At 120 m:
Width at ground level = 8 m + 2 * 0.95 m = 9.90 m
Area = (8 m + 9.90 m) * 0.95 m / 2 = 18.48 m²

- At 150 m:
Width at ground level = 8 m + 2 * 2.05 m = 12.10 m
Area = (8 m + 12.10 m) * 2.05 m / 2 = 39.58 m²

- At 180 m:
Width at ground level = 8 m + 2 * 0.80 m = 9.60 m
Area = (8 m + 9.60 m) * 0.80 m / 2 = 12.96 m²

Finally, let's calculate the volume of cutting by summing up the areas at each interval and multiplying by the chainage distance:
Volume = (Area1 + Area2 + ... + AreaN) * Chainage distance
Volume = (105 m² + 49.77 m² + 45.76 m² + 28.53 m² + 18.48 m² + 39.58 m² + 12.96 m²) * 30 m
Volume = 300.08 m² * 30 m
Volume = 9002.4 m³

To learn more about volume: https://brainly.com/question/14197390

#SPJ11

Give an algorithm to calculate the sum of first n numbers. For example, if n = 5, then the ouput should be 1 + 2 + 3 + 4 + 5 = 15. Give three solutions for this problem. The first solution with a complexity O(1), the second solution with a complexity O(n), and the third solution with a complexity O(n2).
Question 2: [6 Marks]
Give an algorithm to calculate the sum of first n numbers. For example, if n = 5, then the ouput should be 1 + 2 + 3 + 4 + 5 = 15. Give three solutions for this problem. The first solution with a complexity O(1), the second solution with a complexity O(n), and the third solution with a complexity O(n²).
Solution 1:
Solution 2:

Answers

Solution 1 (Complexity O(1)): The sum of the first n numbers can be calculated using the formula for the sum of an arithmetic series: sum = (n * (n + 1)) / 2.

This solution has a complexity of O(1) because it does not depend on the input size.

Algorithm:Read the value of n.

Calculate the sum using the formula sum = (n * (n + 1)) / 2.

Print the value of the sum.

Solution 2 (Complexity O(n)):

This solution involves iterating through the numbers from 1 to n and adding them to the sum. As the input size increases, the number of iterations increases proportionally. Thus, the complexity of this solution is O(n).

Algorithm:

Read the value of n.

Initialize a variable sum to 0.

Iterate i from 1 to n:

a. Add i to the sum: sum = sum + i.

Print the value of the sum.

Solution 3 (Complexity O(n^2)):

This solution uses nested loops to calculate the sum. The outer loop iterates from 1 to n, and the inner loop iterates from 1 to the current value of the outer loop variable. As a result, the number of iterations increases quadratically with the input size, leading to a complexity of O(n^2).

Algorithm:

Read the value of n.

Initialize a variable sum to 0.

Iterate i from 1 to n:

a. Iterate j from 1 to i:

i. Add j to the sum: sum = sum + j.

Print the value of the sum.

Note: Although Solution 3 has a higher time complexity, it is less efficient compared to Solutions 1 and 2. In practice, it is better to choose a solution with a lower time complexity to handle larger inputs more efficiently.

Learn more about variable here:

https://brainly.com/question/29583350

#SPJ11

find the sum and express it in simplest form (-3x^3+4x^2+2) + (9x^3

Answers

Answer: To simplify your expression using the Simplify Calculator, type in your expression like 2(5x+4)-3x.

The simplify calculator will then show you the steps to help you learn how to simplify your algebraic expression on your own.

Type ^ for exponents like x^2 for "x squared". Here is an example:

Step-by-step explanation:

don't know if this will help but I hope s

When H2​ S is decreasing at a rate of 0.44Ms^−1, how fast is S appearing? a) Rate S=−0.66M/s b) Rate S=−0.30M/s c) Rate S=0.30M/s d) Rate S=0.66M/s

Answers

The correct option is c) Rate S = 0.30 M/s.

When H2S is decreasing at a rate of [tex]0.44 Ms^−1[/tex] (moles per second), we can use the stoichiometry of the reaction to determine how fast S is appearing.

The balanced chemical equation for the reaction involving H2S is:

[tex]H2S - > 2H+ + S2-[/tex]

From the equation, we can see that for every 1 mole of H2S that is consumed, 1 mole of S is produced. To find the rate at which S is appearing, we need to consider the stoichiometric ratio between H2S and S.

Since the stoichiometric ratio is 1:1, the rate at which S is appearing will be the same as the rate at which H2S is decreasing. Therefore, the rate at which S is appearing is [tex]0.44 Ms^−1.[/tex]

So, the correct answer is:

c) Rate S = 0.30 M/s.

Know more about stoichiometry

https://brainly.com/question/28780091

#SPJ11

The correct option is c) Rate S = 0.30 M/s.

When H2S is decreasing at a rate of  (moles per second), we can use the stoichiometry of the reaction to determine how fast S is appearing.

The balanced chemical equation for the reaction involving H2S is

H2S → H2 + S

From the equation, we can see that for every 1 mole of H2S that is consumed, 1 mole of S is produced. To find the rate at which S is appearing, we need to consider the stoichiometric ratio between H2S and S.

Since the stoichiometric ratio is 1:1, the rate at which S is appearing will be the same as the rate at which H2S is decreasing. Therefore, the rate at which S is appearing is

So, the correct answer is:

c) Rate S = 0.30 M/s.

Know more about stoichiometry

brainly.com/question/28780091

#SPJ11

Dust has particles with migration velocity of 0.15 m/s. For a total air flow of 65 m3/s, what must be the number of collecting plates in ESP each having area of 50 m2. Assume collection efficiency to be 95%.

Answers

Let's calculate the total number of dust particles passing through the ESP per second:
Total number of dust particles = air flow * migration velocity
Total number of dust particles = 65 m^3/s * 0.15 m/s
Total number of dust particles = 9.75 particles/s. Since the collection efficiency is given as 95%, the ESP will collect 95% of the dust particles passing through it. Therefore, the number of dust particles collected per second will be:
Number of collected dust particles = Total number of dust particles * collection efficiency
Number of collected dust particles = 9.75 particles/s * 0.95
Number of collected dust particles = 9.26 particles/s

To find the number of collecting plates required, we need to calculate the number of particles each plate can collect per second. We can divide the number of collected dust particles by the number of plates: Number of particles collected per plate per second = Number of collected dust particles / Number of plates. Since the area of each plate is given as 50 m^2, we can calculate the number of plates needed:
Number of plates = Number of collected dust particles / (Number of particles collected per plate per second)
Number of plates = 9.26 particles/s / (50 m^2 / plate)
Number of plates = 0.185 plates.
So, the number of collecting plates needed in the ESP, each having an area of 50 m^2, would be at least 1.

migration velocity : https://brainly.com/question/18259786

#SPJ11

2. Suppose the market demand for a new brand of Tex-Mex burritos is as Q d

=40−5∗P. And the market supply for burritos is given by Q s

=10∗P−20, where P= price ( $ per burrito). What is the value of equilibrium price and equilibrium quantity? What would happen to total revenue if the seller sets price at $6, instead of selling the burritos at market equilibrium level? Note: Total revenue − price ∗ the units sold −P∗Q d

, with the price given.

Answers

The equilibrium price of the Tex-Mex burritos is $4 per burrito, and the equilibrium quantity is 20 burritos. If the seller sets the price at $6 instead of the market equilibrium level, the total revenue would decrease.

In a market, the equilibrium price and quantity occur when the quantity demanded equals the quantity supplied. To find the equilibrium price and quantity, we need to set the demand function equal to the supply function and solve for P.

Demand function: Qd = 40 - 5P

Supply function: Qs = 10P - 20

Setting Qd equal to Qs:

40 - 5P = 10P - 20

Combining like terms:

30 = 15P

Dividing both sides by 15:

P = 2

Substituting the equilibrium price back into either the demand or supply function, we can find the equilibrium quantity:

Qd = 40 - 5(2)

Qd = 30

Therefore, the equilibrium price is $4 per burrito, and the equilibrium quantity is 20 burritos.

In a market, the equilibrium price and quantity are determined by the intersection of the demand and supply curves. The demand curve represents the quantity of a product consumers are willing to buy at different prices, while the supply curve represents the quantity producers are willing to supply at different prices.

When the market is in equilibrium, the quantity demanded equals the quantity supplied. In this case, the demand function is given by Qd = 40 - 5P, where Qd represents the quantity demanded and P represents the price per burrito. The supply function is given by Qs = 10P - 20, where Qs represents the quantity supplied.

To find the equilibrium price and quantity, we set the demand and supply functions equal to each other:

40 - 5P = 10P - 20

Simplifying the equation, we find:

30 = 15P

Dividing both sides by 15, we get:

P = 2

Substituting this equilibrium price back into either the demand or supply function, we can find the equilibrium quantity:

Qd = 40 - 5(2)

Qd = 30

Therefore, the equilibrium price is $4 per burrito, and the equilibrium quantity is 20 burritos.

If the seller sets the price at $6 instead of the market equilibrium level, they would be pricing above the equilibrium price. This would result in a higher price than what consumers are willing to pay, leading to a decrease in the quantity demanded. As a result, the seller would experience a decrease in total revenue.

Learn more about equilibrium level

brainly.com/question/32095272

#SPJ11

A quadratic function may have one root, two roots, or no______ roots.

Answers

Answer:

Step-by-step explanation:

A quadratic function may have one root, two roots, or no roots at all.

Which of the following sentences is a contradiction? Select one: O O a. (q→ p) → (p → q) b. (q V p) → (p→q) c. None of the given choices. d. (p →q) → (q→ p)

Answers

By following these steps, you can kill a locked-up program and display the permissions of a file or directory in a Linux environment.

To kill a program that has locked up in a Linux environment, you can use the `kill` command. Here's how you can do it:

1. Identify the process ID (PID) of the program: You need to find the PID of the program that has locked up. You can use the `ps` command along with other utilities like `grep` to search for the specific program. For example, if you are looking for a program named "myprogram", you can run the following command:
  ```
  ps aux | grep myprogram
  ```
  This will display a list of processes matching the name "myprogram" along with their corresponding PIDs.

2. Kill the program using the PID: Once you have identified the PID of the program, you can use the `kill` command to send a signal to terminate the process. The most commonly used signal is SIGTERM (termination signal). To kill the program, execute the following command, replacing "PID" with the actual process ID:
  ```
  kill PID
  ```
  If the program does not respond to the termination signal, you can try using the SIGKILL signal, which forcefully terminates the process. To send the SIGKILL signal, use the `-9` option with the `kill` command:
  ```
  kill -9 PID
  ```
  Note that using the SIGKILL signal should be the last resort as it does not allow the program to perform any cleanup operations.

Regarding displaying the permissions (perms) of a file or directory in Linux, you can use the `ls` command with the `-l` option. Here's how you can do it:

1. Open a terminal: Launch a terminal in your Linux environment.

2. Navigate to the directory or provide the file path: Use the `cd` command to navigate to the directory containing the file whose permissions you want to display. If the file is located in a different directory, you can provide the file path directly.

3. Run the `ls` command with the `-l` option: Execute the following command:
  ```
  ls -l
  ```
  This command will list the files and directories in the current directory, along with their detailed information, including permissions, ownership, size, and modification time.

The permissions of a file are displayed in the first column of the output. The permissions are represented by a combination of letters and symbols. The first character indicates the file type (e.g., `-` for a regular file, `d` for a directory), and the next nine characters represent the permissions for the owner, group, and others. Each set of three characters represents read (`r`), write (`w`), and execute (`x`) permissions, respectively. For example, `-rw-r--r--` indicates that the owner has read and write permissions, while the group and others have only read permissions.

To know more about Linux click-

https://brainly.com/question/33210963
#SPJ11

Partial Differential Equations
answer:
4. Solve u, u for 0≤x≤1, given u(0,t) = 2, u(1,t) = 2, u(x,0)=e*.
00 4. u(x,t)= 2 + Σ n=1 2nπ [1+n²π² 4 (1− (−1)'e`¹) — — ^ (1-(-1)^) ]e~^*^*' si nπ ²1 sinnx

Answers

The given partial differential equation is,[tex]∂u/∂t - α² ∂²u/∂x² = 0u(0, t) = 2, u(1, t) = 2, u(x, 0) =[/tex] .To solve the given partial differential equation, we can use the separation of variables method. Let[tex]\( u(x, t) = X(x)T(t) \)[/tex].

Then we can write the partial differential equation in the following form:

[tex]\( X(x) T'(t) - \alpha^2 X''(x) T(t) = 0 \)[/tex]

[tex]\( \frac{{X(x) T'(t)}}{{T(t)}} = \alpha^2 \frac{{X''(x)}}{{X(x)}} = \lambda \) (let's say)[/tex]

Now let's solve for [tex]\( T(t) \)[/tex].

[tex]\( T'(t) = \lambda T(t) \)[/tex]

[tex]\( T(t) = c_3 e^{\lambda t} \)[/tex]

The solution of the given partial differential equation is:

[tex]\( u(x, t) = X(x) T(t) = (c_1 \sin(\alpha x) + c_2 \cos(\alpha x)) c_3 e^{\lambda t} = c_1 \sin(\alpha x) e^{\lambda t} + c_2 \cos(\alpha x) e^{\lambda t} \)[/tex]

Therefore, the complete solution of the given partial differential equation is:[tex]\( u(x, t) = \sum [c_1 \sin(\alpha x) e^{\lambda t} + c_2 \cos(\alpha x) e^{\lambda t}] \)[/tex]

Using the initial condition,[tex]\( u(x, 0) = e^x \)[/tex], we get the following condition:

[tex]\( c_1 \sin(\alpha x) + c_2 \cos(\alpha x) = e^x \)[/tex].

Using these three conditions, we can solve for[tex]\( c_1 \), \( c_2 \), and \( c_3 \)[/tex].

Thus, we get the following solution:[tex]\( u(x, t) = 2 - \frac{8}{{\pi^2}} \sum_{n=1}^{\infty} [(-1)^n \sin(n\pi x) e^{-n^2\pi^2\alpha^2 t}] \),[/tex]

the solution of the given partial differential equation is [tex]\( u(x, t) = 2 - \frac{8}{{\pi^2}} \sum_{n=1}^{\infty} [(-1)^n \sin(n\pi x) e^{-n^2\pi^2\alpha^2 t}] \).[/tex]

To know more about differential visit:

https://brainly.com/question/33433874

#SPJ11

The angular distribution functions of all orbitals have (a) I nodal surfaces (c) n+1 nodal surfaces (b) 1-1 nodal surfaces (d) n-1-1 nodal surfaces

Answers

Orbitals with the same value of l have the same number of nodal surfaces. For example, d orbitals have l=2 and n=3, therefore they have three nodal surfaces, two of which are planar and one is conical.

The angular distribution functions of all orbitals have (b) 1-1 nodal surfaces. In the context of an atomic orbital, angular distribution functions are used to represent an electron's probability distribution as a function of angle relative to the nucleus. For every orbital, the angular distribution function has one nodal surface.

The nodal surface is a region where the probability of finding an electron is zero or near zero. Nodal surfaces are defined as the areas where the wave functions go through zero and change sign. The number of nodal surfaces in an atomic orbital is determined by the orbital's angular momentum quantum number (l).The number of nodal surfaces in an atomic orbital is n - l - 1, where n is the principal quantum number. As a result, orbitals with the same value of l have the same number of nodal surfaces. For example, d orbitals have l=2 and n=3, therefore they have three nodal surfaces, two of which are planar and one is conical.

Learn more about nodal surfaces visit:

brainly.com/question/30116754

#SPJ11

Current Attempt in Progress To what volume (in mL) must 50.0 mL of 1.68 MHCI be diluted to produce 0.550 M HCI? mL

Answers

You will need to dilute the 50.0 mL of 1.68 M HCl to a volume of approximately 152.7 mL in order to obtain a 0.550 M HCl solution.

To dilute 50.0 mL of 1.68 M HCl to produce a 0.550 M HCl solution, you will need to add a certain volume of solvent (typically water) to achieve the desired concentration.

To find the volume of solvent needed, you can use the equation C1V1 = C2V2, where C1 is the initial concentration, V1 is the initial volume, C2 is the final concentration, and V2 is the final volume. Rearranging the equation to solve for V2, we get:

V2 = (C1V1) / C2

Substituting the given values, we have:

V2 = (1.68 M * 50.0 mL) / 0.550 M

Calculating this, we find:

V2 ≈ 152.7 mL

Therefore, you will need to dilute the 50.0 mL of 1.68 M HCl to a volume of approximately 152.7 mL in order to obtain a 0.550 M HCl solution.

Know more about volume here:

https://brainly.com/question/28058531

#SPJ11

What is the area of the rectangle shown below?
(0, 3)
(0,0)
(8,3)
(8,0)
area=x
Not drawn accurately

Answers

Answer:

24

Step-by-step explanation:

Area = 8 * 3 = 24

. Precise mass of 3,3-dimethylbutan-2-ol..... 1.53g Molecular mass of 3,3-dimethylbutan-2-ol..... .102.174 Net mass of alkene products. ... 84.169 Molecular mass of alkene products.. Theoretical yield of alkene products... % Yield of alkene products. 3 Sample number (gas chromatograph tray).. Use dimensional analysis (with unit cancellations) to calculate the theoretical yield and % yield. Show work: Table 7.2. List the alkene products in order of decreasing percentage. وا0.8

Answers

The theoretical yield of alkene products can be calculated using dimensional analysis by dividing the net mass of alkene products by the molecular mass of alkene products and multiplying by the molar mass of the alkene products. The percent yield of alkene products can be calculated by dividing the theoretical yield by the precise mass of 3,3-dimethylbutan-2-ol and multiplying by 100.

To calculate the theoretical yield of alkene products, we first need to determine the moles of alkene products by dividing the net mass of alkene products by the molecular mass of alkene products:

Moles of alkene products = Net mass of alkene products / Molecular mass of alkene products

Next, we can calculate the theoretical yield of alkene products by multiplying the moles of alkene products by the molar mass of the alkene products.

Theoretical yield of alkene products = Moles of alkene products * Molar mass of alkene products

To calculate the percent yield of alkene products, we divide the theoretical yield by the precise mass of 3,3-dimethylbutan-2-ol and multiply by 100:

% Yield of alkene products = (Theoretical yield / Precise mass of 3,3-dimethylbutan-2-ol) * 100

By performing these calculations, we can determine the theoretical yield and percent yield of the alkene products. Additionally, the alkene products can be listed in order of decreasing percentage by comparing their individual yields and arranging them accordingly.

To know more about Calculate visit-

brainly.com/question/31718487

#SPJ11

A 32 ft long simply supported beam (assume full lateral support along the compression flange) supports a moving concentrated load of 40 kips from an underslung crane. Estimate beam weight at 60 plf. Select the lightest section available based on moment capacity. Then check the section for shear capacity using ASD. Compute the minimum length of bearing required at the supports from the standpoint of web crippling and web yielding. Also check web sidesway buckling.

Answers

Due to the lack of specific information regarding the beam section and design code, a direct answer, calculation, and conclusion cannot be provided at this time. To perform an accurate analysis, please provide the necessary details, and I will be happy to assist you further.

Since I do not have the specific details of the beam section and design code, I am unable to provide a detailed explanation and perform the required calculations. The analysis of a beam's weight, moment capacity, shear capacity, web crippling, web yielding, and web sidesway buckling involves a comprehensive structural analysis that considers the properties and behavior of the specific beam section and follows the relevant design code provisions.

To estimate the beam weight, you can use the formula:

Weight = Length × Weight per unit length

Given that the length of the beam is 32 ft and the weight per unit length is 60 plf (pounds per linear foot), you can calculate the estimated beam weight.

For selecting the lightest section based on moment capacity, you would need the section properties (such as the moment of inertia) of various available beam sections. Comparing the moment capacity of each section based on the applied loads can help identify the lightest section that can safely resist the moments.

Similarly, for checking the section's shear capacity using Allowable Stress Design (ASD), the shear strength of the section should be compared to the applied shear force.

The determination of the minimum length of bearing required at the supports from the standpoint of web crippling and web yielding depends on the specific beam section and its design parameters.

Lastly, checking web sidesway buckling involves analyzing the stability of the web under lateral loads, considering factors such as the slenderness ratio and the properties of the material.

Learn more about vulcanization visit:

https://brainly.com/question/30156827

#SPJ11

Help what's the answer

Answers

The linear equation represented by the table is:

y = -2.4*x + 18

How to find the equation of the line?

A general linear equation can be written as follows:

y = ax + b

Where a is the slope and b is the y-intercept.

On the graph we can see that when x = 0, the value of y is 18, so that is the y-intercept, and thus, we can write the line as:

y = ax + 18

The next point is (2, 13.2)

Replacing that we can get:

13.2 = 2a + 18

13.2 - 18 = 2a

-4.8 = 2a

-4.8/2 = a

-2.4 = a

So the linear equation is:

y = -2.4*x + 18

Learn more about linear equation at:

https://brainly.com/question/1884491

#SPJ1

I wo ships leave from the same port. One ship travels on a bearing of 157° at 20 knots. The second ship travels on a bearing of 247° at 35 knots. (1 knot is a speed of 1 nautical mile per hour.) a) How far apart are the ships after 8 hours, to the nearest nautical mile? b) Calculate the bearing of the second ship from the first, to the nearest minute.

Answers

To calculate the distance between the two ships after 8 hours, we can use the formula: distance = speed × time.

For the first ship:
Distance traveled = 20 knots × 8 hours = 160 nautical miles.

For the second ship:
Distance traveled = 35 knots × 8 hours = 280 nautical miles.

a) The distance between the two ships after 8 hours is the difference between their distances traveled:
Distance = 280 nautical miles - 160 nautical miles = 120 nautical miles.

Therefore, the ships are approximately 120 nautical miles apart after 8 hours.

b) To calculate the bearing of the second ship from the first, we can use the formula: bearing = 180° - angle.

The angle between the two ships can be found by subtracting the bearing of the first ship from the bearing of the second ship:
Angle = 247° - 157° = 90°.

Therefore, the bearing of the second ship from the first is 180° - 90° = 90°.

Let L = {w € {a + b}" | #b(w) is even}. Which one of the regular expression below represents L? pt) (a) (a*ba*b)* (b) a*(baba")" (c) a* (ba*b*)*a* (d) a*b(ba*b)"ba

Answers

The regular expression that represents the language L is option (c) a* (bab)a. This regular expression matches strings that consist of zero or more 'a's followed by zero or more occurrences of the pattern 'bab', and ending with zero or more 'a's. This pattern ensures that the number of 'b's in the string is always even.

To understand why option (c) is the correct regular expression for representing the language L, let's break down the components of the regular expression:

a* - Matches zero or more occurrences of 'a'.

(bab)* - Matches zero or more occurrences of the pattern 'bab', where 'b' can be followed by zero or more 'a's. This pattern allows for an arbitrary number of 'b's to occur, as long as the count is even.

a* - Matches zero or more occurrences of 'a'.

By combining these components, the regular expression ensures that any string in L will start and end with zero or more 'a's and have an even number of 'b's in between.

The other options (a), (b), and (d) do not correctly represent the language L. Option (a) allows for any number of 'b's, including odd counts.

Option (b) requires a specific pattern of 'baba' to appear in the string, which may not satisfy the condition of having an even number of 'b's. Option (d) allows for an arbitrary number of 'b's without enforcing an even count.

Therefore, option (c) is the correct choice for representing the language L.

To learn more about even number visit:

brainly.com/question/2263644

#SPJ11

It is well-known that the AI research had stalled for decades before achieving recent resounding breakthroughs, e.g., 2016 has been crowned as the Year of Deep Learning. There are many factors – the advancements of technology in various fields such as hardware, software, the advent of big data, cell phones and sensors, to name a few – that can have significant impacts on such changes. What factor would be considered as the most significant? Please provide details and examples to support your opinions

Answers

The most significant factor contributing to the recent breakthroughs in AI research, such as the Year of Deep Learning in 2016, can be attributed to the advancements in hardware technology.

Examples are: Training deep neural networks, Real-time inference.

Over the past few decades, there have been significant improvements in the performance and capabilities of computer processors, memory, and storage devices.
These advancements in hardware have allowed researchers and developers to train and run complex AI models more efficiently and effectively. For example, the introduction of Graphics Processing Units (GPUs) and specialized AI chips like Tensor Processing Units (TPUs) have significantly accelerated deep learning algorithms, enabling the processing of massive amounts of data in parallel.
Moreover, the availability of high-performance computing resources, such as cloud-based platforms, has democratized access to powerful computational resources. This has allowed researchers and developers from various backgrounds to experiment with and apply AI techniques to their respective fields.
Some examples to illustrate the impact of hardware advancements on AI research:
1. Training deep neural networks: Deep learning models consist of multiple layers and require immense computational power to train. In the past, training these models could take weeks or even months. However, with the introduction of powerful GPUs, training times have been greatly reduced. For instance, researchers at OpenAI trained a language model called GPT-3 with 175 billion parameters using thousands of GPUs, resulting in a highly capable natural language processing model.
2. Real-time inference: Real-time applications, such as autonomous vehicles or speech recognition systems, require quick decision-making based on input data. Hardware advancements have made it possible to deploy complex AI models on edge devices, like smartphones or IoT devices, enabling real-time inference without relying on cloud servers. For example, smartphones now have dedicated AI accelerators that can process and analyze images or perform voice recognition tasks locally.

Learn more about Deep Learning:

https://brainly.com/question/33757034

#SPJ11

Determine the exact measure(s) of the angle θ, where 0≤θ≤2π. a. 10secθ+2=−18 {5} b. sin2θ+cosθ=0 {5}

Answers

Thus, the exact measure of θ is {π/2, 3π/2, -π/6, 11π/6}.

Let's solve the given trigonometric equation:

a. 10secθ+2=−18

Since secθ = 1/cosθ, we get 10/cosθ = -20 which leads to cosθ = -1/2

Therefore, θ is in either 2nd or 3rd quadrant where cosθ is negative.

So, let's use the value of cosθ in sin²θ + cosθ = 0, sin²θ + (-1/2) = 0, sin²θ = 1/2, sinθ = 1/√2 or -1/√2

In 2nd quadrant:θ = π - sin⁻¹(1/√2)θ = 5π/4

In 3rd quadrant:θ = π + sin⁻¹(1/√2)θ = 7π/4

Thus, the exact measure of θ is 5π/4 or 7π/4

(b) sin2θ+cosθ=0sin2θ + cosθ = 0

By substituting sin2θ=2sinθcosθ, we get:

2sinθcosθ + cosθ = cosθ(2sinθ + 1) = 0

Either cosθ = 0 or 2sinθ + 1 = 0

Therefore, cosθ = 0 at θ = π/2, 3π/2 and 2sinθ+1=0 at θ = -π/6, 11π/6. (θ = 5π/6 and 7π/6 are extraneous)

Thus, the exact measure of θ is {π/2, 3π/2, -π/6, 11π/6}.

To know more about trigonometric equation visit:

https://brainly.com/question/30710281

#SPJ11

What is meant by workability in concrete? What are the main factors affecting it?

Answers

Workability in concrete refers to the ease and ability of freshly mixed concrete to be manipulated, placed, and compacted without segregation or excessive effort. It is a measure of the concrete's consistency, fluidity, and ability to flow and fill the desired formwork.

Workability is an essential property of concrete as it directly influences the placement and compaction process during construction. It is influenced by several factors that affect the behavior of the concrete mixture. The main factors affecting workability in concrete include:

1. Water content: The amount of water present in the concrete mixture significantly affects its workability. An increase in water content generally improves workability by increasing the fluidity of the mixture. However, adding excessive water can lead to problems such as segregation, bleeding, and reduced strength.

2. Cement content: The amount of cement in the mixture also influences workability. Higher cement content typically results in a stiffer mixture with reduced workability. Conversely, lower cement content may improve workability, but it can affect the strength and durability of the concrete.

3. Aggregate properties: The properties of aggregates, such as their shape, size, grading, and surface texture, have a considerable impact on workability. Well-graded aggregates with a smooth surface texture generally enhance workability by reducing friction and facilitating better particle distribution.

4. Admixtures: Various admixtures, such as water reducers, plasticizers, and superplasticizers, can be added to the concrete mixture to modify its workability. These chemicals help improve flowability, reduce water content, and enhance the overall workability of the concrete.

5. Mix proportions: The overall mix proportions, including the ratio of cement, aggregates, water, and admixtures, play a crucial role in determining the workability. Properly designed mix proportions considering the desired workability requirements are necessary to achieve the desired consistency and ease of placement.

6. Temperature: The temperature of the concrete mixture can affect workability. Higher temperatures can accelerate the hydration process, leading to reduced workability due to faster setting and increased evaporation of water. On the other hand, lower temperatures can slow down the setting time and may require additional measures to maintain workability.

Workability in concrete refers to its ability to be easily handled, placed, and compacted without segregation or excessive effort. It is influenced by factors such as water content, cement content, aggregate properties, admixtures, mix proportions, and temperature. Achieving the desired workability is crucial for successful concrete placement and construction, and it requires careful consideration of these factors during the concrete mix design process.

Learn more about Workability visit:

https://brainly.com/question/31325858

#SPJ11

Due 07/17/2022 Propose a multistep synthesis of a carboxylic acid derivative. The synthesis should be at least 3 steps long. The product should have at least one carbon more than the starting material in the main chain. You should start your video with the reaction of the starting material going to product. Then explain your proposed synthesis.

Answers

A carboxylic acid derivative is a functional group that contains a carbonyl group adjacent to an ether or an acyl group, including acid chlorides, anhydrides, esters, and amides. The most common type of carboxylic acid derivative is an ester.

The condensation of a carboxylic acid with an alcohol to form an ester is a common synthetic route for esters. Let's go through the multistep synthesis of a carboxylic acid derivative.Step 1: Synthesis of methyl 2-bromo-2-methylpropanoate.

Starting material: Methanol, acetic anhydride, and concentrated sulfuric acid. Procedure: A reaction between methanol and acetic anhydride catalyzed by sulfuric acid produces methyl acetate. Afterward, methyl acetate reacts with 2-bromo-2-methylpropanoic acid in the presence of sodium carbonate to produce methyl 2-bromo-2-methylpropanoate. Methyl acetate + 2-bromo-2-methylpropanoic acid + sodium carbonate ⟶ Methyl 2-bromo-2-methylpropanoateStep 2: Synthesis of 2-bromo-2-methylpropanoic acid.

Starting material: 2-methylpropene and bromine. Procedure: 2-methylpropene reacts with bromine to create 2-bromo-2-methylpropane. Furthermore, hydrolysis of 2-bromo-2-methylpropane in the presence of sodium hydroxide results in 2-bromo-2-methylpropanoic acid. 2-methylpropene + Bromine ⟶ 2-bromo-2-methylpropane2-bromo-2-methylpropane + sodium hydroxide ⟶ 2-bromo-2-methylpropanoic acidStep 3: Synthesis of 3-bromo-2-methylpropanoic acid. Starting material: Methyl 2-bromo-2-methylpropanoate.

Procedure: The hydrolysis of Methyl 2-bromo-2-methylpropanoate in the presence of sodium hydroxide results in 3-bromo-2-methylpropanoic acid. Methyl 2-bromo-2-methylpropanoate + sodium hydroxide ⟶ 3-bromo-2-methylpropanoic acidThus, this is the synthesis of a carboxylic acid derivative by following a multistep reaction mechanism with a total of three steps.

For more information on carboxylic acid visit:

brainly.com/question/4721247

#SPJ11

10. How much is 600 increased by 44%? 11. What amount, when reduced by 60% equals $840? 12. After a 5.25% raise, Johnny earned $19.28 per hour. What was his hourly rate before the raise?
13. The population of Enfield has increased by 36% over the last five years. If the current population is 89,244 what was it 5 years ago? 14. Susan is paid a 15% commission of her sales. If she earns a commission of $3800, what was the amount of her sales?

Answers

10. 600 increased by 44% is = 864

11. The amount, when reduced by 60%, equals $2100.

12. Johnny's hourly rate before the raise was approximately $18.33.

13. The population of Enfield five years ago was approximately 65,674.

14. The amount of Susan's sales was approximately $25,333.33.

A percent is a way of expressing a fraction or a proportion out of 100. It is represented by the symbol "%". The term "percent" comes from the Latin word "per centum," which means "per hundred." Percentages are commonly used to describe relative quantities, proportions, or rates of change.

10. To find the increase of 44% on 600, we can calculate:

Increase = 600 * 44%

= 600 * 0.44

= 264

Therefore, 600 increased by 44% is 600 + 264 = 864.

11. Let's assume the amount we need to find is X. We can set up the equation as follows:

X - 60% of X = 840

X - 0.6X = 840

0.4X = 840

X = 840 / 0.4

X = 2100

12. Let's assume Johnny's hourly rate before the raise is X. We can set up the equation as follows:

X + 5.25% of X = $19.28

X + 0.0525X = $19.28

1.0525X = $19.28

X = $19.28 / 1.0525

X ≈ $18.33 (rounded to the nearest cent)

13. Let's assume the population of Enfield five years ago was X. We can set up the equation as follows:

X + 36% of X = 89,244

X + 0.36X = 89,244

1.36X = 89,244

X = 89,244 / 1.36

X ≈ 65,674 (rounded to the nearest whole number)

14. Let's assume the amount of Susan's sales is X. We can set up the equation as follows:

X * 15% = $3800

0.15X = $3800

X = $3800 / 0.15

X = $25,333.33 (rounded to the nearest cent)

To know more about whole number, click-
https://brainly.com/question/29766862
#SPJ11

Time left A Heat pump rejects a heat of 983 kW to the surrounding and has a coefficient of performance COP-9.9. What is the coefficient of performance if the heat pump is used as a refrigerator? A. Zero B. 8. 8.9 C. 10.9 D. 0.1

Answers

the coefficient of performance (COP) for the refrigerator is approximately 0.101.

Answer: D. 0.1

The coefficient of performance (COP) of a heat pump is defined as the ratio of the heat transferred to the desired output (heating or cooling) to the work input. In this case, the given heat pump has a COP of 9.9 when used as a heat pump, which means it transfers 9.9 units of heat for every unit of work input.

When the heat pump is used as a refrigerator, the desired output is cooling, and the heat is transferred from a lower temperature region to a higher temperature region. In this scenario, the COP for the refrigerator is given by the reciprocal of the COP for the heat pump:

[tex]COP_{refrigerator} = 1 / COP_{heat pump}[/tex]

               = 1 / 9.9

               ≈ 0.101

To know more about coefficient visit:

brainly.com/question/13431100

#SPJ11

Other Questions
There is a magical point between the Earth and the Moon, called the L Lagrange point, at which a satellite will orbit the Earth in perfect synchrony with the Moon, staying always in between the two. This works because the inward pull of the Earth and the outward pull of the Moon combine to create exactly the needed centripetal force that keeps the satellite in its orbit. Check your textbook for a diagram of the setup. a) Assuming circular orbits, and assuming that the Earth is much more massive than either the Moon or the satellite, show that the distance r from the center of the Earth to the point satisfies GM Gm (R-r2 = w?r, r2 where M and m are the Earth and Moon masses, G is Newton's gravitational constant, and is the angular velocity of both the Moon and the satellite Type your answer here or insert an image /15pts. b) The equation above is a fifth-order polynomial equation in r (also called a quintic equation). Such equations cannot be solved exactly in closed form, but it's straightforward to solve them numerically. Write a program that uses Newton's method to solve for the distance r from the Earth to the point. Compute a solution accurate to at least four significant figures. The values of the various parameters are: G= 6.674 x 10-' m kg-'s-2, M = 5.974 x 1024 kg, m= 7.348 x 1022 kg, R= 3.844 x 108 m, o = 2.662 x 10-6-1 You will also need to choose a suitable starting value for r. Think about what value r should be. #Type your code here give your suggestions to maintain the glory of malaysian government today Describe 3 activities that can help the least skilled jumper improve specific aspects of his/her performance. For example, if the subject does not use his/her arms to generate momentum when jumping, what activity could he/she practice to improve this specific aspect of the skill? Each activity should be fun and age-appropriate. Each activity should be formatted as: -Aspect to improve -Description of activity 1 to improve this aspect Given 10-10. 7 121.1, estimate the number of terms needed in a Taylor polynomial to guarantee an accuracy of ms are needed. What are the implications of categorizing older adults as ""ill-derly"" and ""well-derly""? Do these two categories capture sufficiently the diversity of older adults and the complexity of the aging experience or serve to further ageist stereotypes? Discuss giving at least two examples. An inductive load consumes 200 kW at 0.7 pf lagging. A synchronous motor with a pf of 0.85 leading is connected in parallel with the inductive load. a. What is the required current consumption of the synchronous motor operating at 440 V,3 phase, so that the combined load will have a pf of 0.9 lagging? b. What is the new real power consumption of the load? At a rock concert, a dB meter registered 124 dB when placed 2.5 m in front of a loudspeaker on stage. What is the sound level produced by the rock concert at 10 m, assuming uniform spherical spreading of the sound and neglecting absorption in the air? (l = 1 10 W/m is a reference intensity, usually taken to be at the threshold of hearing.) a. 109 Dbb. 112 dB c. 119 dB d. 129 dB e. 122 dB Draw the logic diagram for a circuit that uses the cascadable priority encoder of Figure 7-12 to resolve priority among eight active-high inputs, I0I7, where I0 has the highest priority. The circuit should produce three active-low address outputs A2_LA0_L to indicate the number of the highest-priority asserted input. If at least one input is asserted, then an AVALID output should be asserted. Be sure to name all signals with the proper active levels. You may use discrete gates in addition to the priority encoder, but minimize the number of them. Be sure to name all signals with the proper active levels This is not psychology this is ethics.1. How does Aristotle defend the claim that the good for humanbeings is happiness?2. According to Aristotle, how is virtue acquired? A Jeep travels along a circular path with a diameter of 400 m. If the jeep's velocity is described by the equation 2t2 + 5t m/s, determine a) the magnitude of the Jeep's acceleration after 3 seconds and b) how far the jeep has traveled from 0-3 sec a) List three important hierarchies for choosing control variables during control loop specification (just key words would be adequate, no explanation required).Name two valves that are used in both on-off and throttling applications. c) Write down the general transfer function for a PID controller. d) In one sentence, state the key difference between using a minimum IAE tuning criterion and a minimum ITAE tuning criterion. e) Write down the letter from the below corresponded equipment in the bracket to match with the symbols illustrated in the process instrumentation and piping diagram below. 1-(); 2 -(); 3-(); 4-(); 5-(); 6-(); 7-(); 8-(); 9-(); 10-() Suppose that the output disturbance is a sinusoidal signal of frequency 6 (rad/sec) and the plant is described by the transfer function G(s) = s + 4 /(S-1)(s+2) Design a pole-assignment controller to minimize the effect of the disturbance. Three of the closed-loop poles are chosen to be -4, and the rest of the closed-loop poles are chosen to be -2. - Will the output of the closed-loop system follow a sinusoidal set- point signal of the same frequency with zero steady-state error? Explain your answer by using sensitivity function analysis Explain why you get wiener dog puppies when you breed wienerdogs. Critique the first 4 categories of the Outline for CulturalFormulation.Discuss the 1 criterion you believe is the most important forunderstanding how a clients presenting issue is affecting them The teacher is discriminating against a poor stadent and kids slowly learn that poverty is looked down upon by society. This learning is part of the The sthools offeial cirticulum The influences of a total institution The tidsen carricukin of wobers: The influences of anes beet woups A teen boy behaves respectfully towards the teacher, because he krows this is toxpected of him, The teen is going through stage of moral developenent by Kohlberg. cockeritionsl postconentiony Respectiof Colnitive Martin Luther King, in order to advance the Crvil Rights moversent, decided to violate the laws of his time because he found them uniust. According to Kohlberg. this was an example of morality posticinvertional conventional cogritive: submaril When a child talks on a toy phone imitating his father, then he goes through the as defined by Mead The zarne staze The "eeneralized other" stare The ravistere The presaratory same? Determine the surface area and volume. Note: The base is a square. In about 5 sentences, explain what a recursive phrase structureis. Make sure you provide an example of a recursive phrasestructure in doing so. Abeam with b=250mm, h=450mm, cc=40mm, bar size=28mm, stirrups=10mm,fc'=45Mpa, fy=345Mpa is to carry a moment of 210kN-m.calculate the required area of reinforcement for tension Pick one theory of family and explain how that theory discussesthe family sociologically. (a) (6%) Given 8 numbers stored in an array A = [1, 2, 3, 4, 5, 6, 7, 8], illustrate how the Build Heap procedure rearranges the numbers so that they form a (max-)heap. In particular, show the final heap structure. (b) (4%) Consider the heap you created implements a priority queue. Explain the steps carried out in inserting the number '9' into the structure. In particular, show the final heap structure after the insertion is completed.