-. How does the growing number of industries affect the environment? Also give the examples from your surroundings or nearby.​

Answers

Answer 1

Answer:

Explanation:

becase of factorys water pollution and air polluction are also affecting the envoinment and cuuting the trees by humans making inbalance in envoirnment


Related Questions

State your ecological footprint. Elaborate on the following: the importance of this calculation, your "feelings" about your calculation, ways that you can reduce your footprint, and any other information that you would like to include.

Answers

My ecological footprint is a measure of the impact of my activities on the environment. It measures the amount of land required to produce the resources I use and the waste I generate. The importance of this calculation is that it helps me understand the impact of my daily activities on the environment.

By knowing my ecological footprint, I can take steps to reduce my impact on the environment and help protect our planet. My calculation was a bit larger than I expected. I realized that there are several areas where I could reduce my footprint, such as reducing the amount of meat I eat and driving less. I also felt motivated to make changes to my lifestyle to reduce my impact on the environment. There are several ways that I can reduce my ecological footprint.

For example, I can reduce my energy consumption by turning off lights and unplugging electronics when they're not in use. I can also reduce my water consumption by taking shorter showers and fixing leaks. Additionally, I can reduce my carbon footprint by driving less, carpooling, or using public transportation. Other ways that I can reduce my ecological footprint include recycling, using reusable bags and containers, and eating a plant-based diet.

To know more about environment visit:

https://brainly.com/question/29885760

#SPJ11

Historical evidence suggests that growth rates have increased over the very long run. For example, growth was slow and intermittent prior to the Industrial Revolution. Sustained growth became possible after the Industrial Revolution, with average growth rates of per capita income in the nineteenth century of approximately 1 percent per year. Finally, in the twentieth century, more rapid growth has emerged. Discuss this evidence and how it can be understood in endogenous growth models (in which standard policies can affect long-run growth).

Answers

Industrial Revolution enabled sustained growth; 19th century saw 1% per year growth, 20th century marked by rapid progress. Policies impact growth in endogenous models.

The historical evidence of increasing growth rates can be attributed to the transformative effects of the Industrial Revolution. Prior to this period, economic growth was sluggish and irregular. However, the Industrial Revolution brought about technological advancements and innovations, which led to sustained growth. In the nineteenth century, average growth rates of per capita income reached approximately 1 percent per year, indicating a significant improvement.

The twentieth century witnessed even more rapid growth due to further technological progress and increased productivity. These historical patterns align with endogenous growth models, which emphasize the role of internal factors in driving long-run growth. In these models, standard policies can have a profound impact on growth by promoting innovation, research and development, education, and infrastructure development. By fostering an environment conducive to technological progress, economies can achieve sustained and accelerated growth rates.

To learn more about Revolution follow the link:

https://brainly.com/question/32280733

#SPJ4

S
A student conducts an enzyme experiment revolving around changing the concentration of
sodium chloride, and its effects upon the rate of reaction when applied to the enzyme amylase
and starch in the presence of a pH Buffer of 7. The student obtains a data set based upon the
time taken for the disappearance of starch, associated with a sustained colouration of brown
when the mixture was added to a spotting tile containing I/KI (iodine in potassium iodide).
The student obtains the following results: it took 4 minutes and 32 seconds for the standard
solution of amylase containing 0.5% NaCl to breakdown the starch once the amylase was
added, 6 minutes and 24 seconds for the standard solution of amylase with 0.4% NaCl, whilst
the 0.3% NaCl and amylase mix took eight minutes and forty seconds to break the starch
down. 0.1% NaCl gave a result of eighteen minutes and 30 seconds, whilst the amylase
solution with 0.2% NaCl took 12 minutes and twenty seconds.
The student is informed that as the results reflect the use of the disappearance of substrate
and not the production of product, their results must be converted to 1/T (where T=time in
conds) for the rate of reaction.
a) Help the student by processing the data and producing a suitable table of results.
(6 marks)
b) From the results produce a suitable graph - in excel (or other suitable package) and
insert the graph here. (You may draw by hand the graph on suitable graph paper and
scan and insert as an alternative to the use of excel).
(6 marks)
c) Give a detailed biological explanation to account for the results obtained.
(8 marks)
(Total 20 Marks)

Answers

Answer:

To process the data and produce a suitable table of results, we need to convert the time values to 1/T, where T is the time in seconds. Here is a table representing the processed data:

b) To create a suitable graph, let's plot the NaCl concentration on the x-axis and the 1/Time on the y-axis. Here is a graph showing the relationship between NaCl concentration and the rate of reaction:

c) Detailed biological explanation to account for the results obtained: The results obtained suggest that the rate of reaction, as indicated by the disappearance of starch, is affected by the concentration of sodium chloride (NaCl). Amylase is an enzyme responsible for breaking down starch into smaller molecules. Sodium chloride, as a salt, can influence the activity of enzymes.

In this experiment, as the concentration of NaCl decreases, the time taken for starch breakdown increases. This implies that higher NaCl concentrations enhance the activity of amylase, leading to faster starch breakdown.

One possible explanation for this observation is that NaCl can stabilize the structure of amylase, thereby promoting its active conformation. At higher NaCl concentrations, the enzyme's active site may have a more optimal conformation, allowing for efficient binding of the starch substrate and faster enzymatic activity. As the NaCl concentration decreases, the enzyme's structure may become less stable, resulting in slower starch breakdown.

Another factor to consider is the effect of salt concentration on the overall osmotic environment. Changes in NaCl concentration can impact the water potential and osmotic balance, which in turn can influence the enzyme's activity. The precise mechanism behind this phenomenon would require further investigation and analysis.

Overall, the results indicate that sodium chloride concentration plays a role in modulating the rate of reaction catalyzed by amylase. Further experimentation and analysis could provide additional insights into the specific mechanisms involved in this process.

NaCl Concentration (%)Time (min:sec)Time (s)1/Time0.54:322720.00370.46:243840.00260.38:405200.00190.118:3011100.00090.212:207400.0014

Final answer:

To process the data and produce a suitable table of results, convert the time taken to break down the starch into 1/T values. Use the 1/T values to plot a graph of enzyme activity versus sodium chloride concentration. The rate of reaction is fastest at a sodium chloride concentration of 0.5% and decreases as the concentration decreases.

Explanation:

To process the data and produce a suitable table of results, convert the time taken to break down the starch into 1/T (where T=time in seconds). The table should include the different concentrations of sodium chloride and their corresponding 1/T values.

To create a graph, plot the concentration of sodium chloride on the x-axis and the 1/T values on the y-axis. Use Excel or another graphing package to plot the points and draw a smooth curve through them.

The results can be explained biologically by considering the effect of sodium chloride concentration on enzyme activity. The rate of reaction is fastest when the concentration of sodium chloride is 0.5% and decreases as the concentration decreases. This is because the presence of sodium chloride affects the shape and activity of the enzyme, making it less effective at lower concentrations.

Learn more about Enzyme experiment here:

https://brainly.com/question/32396159

#SPJ2

The antiparallel arrangement of DNA means that a. DNA strands have both a 5' and 3' ends and can fit together in either direction in a double stranded molecule b. Each DNA strand has both a 5' and a 3' end and the strands run in opposite directions in a double stranded DNA molecule c. Each DNA strand has both a 5' and a 3' end and the strands run in the same direction in a double stranded DNA molecule d. DNA is only replicated in a 5' to 3' direction e. DNA strands have no directionality and align together in parallel strands

Answers

The correct answer is b. Each DNA strand has both a 5' and a 3' end, and the strands run in opposite directions in a double-stranded DNA molecule.

The antiparallel arrangement of DNA refers to the orientation of the two strands in a DNA molecule. In this arrangement, one strand runs in the 5' to 3' direction, while the other strand runs in the opposite direction, 3' to 5'. This means that the 5' end of one strand is aligned with the 3' end of the other strand.

The 5' and 3' ends of DNA strands refer to the carbon atoms in the sugar component of the DNA backbone. The 5' end has a phosphate group attached to the 5th carbon of the sugar, while the 3' end has a hydroxyl (-OH) group attached to the 3rd carbon of the sugar.

The antiparallel arrangement is essential for DNA replication and other processes involving DNA. During replication, DNA polymerase enzymes can only add new nucleotides to the 3' end of a growing DNA strand. Therefore, the antiparallel arrangement allows both strands to be replicated simultaneously, with the leading strand being synthesized continuously and the lagging strand being synthesized in short fragments called Okazaki fragments.

Learn more about double-stranded DNA molecule here

https://brainly.com/question/13062985

#SPJ11

ecological terms a disturbance is an event that has drastic impacts on environmental conditions resulting in changes to the community and ecosystem. Communities are dynamic and may respond to disturbances in several ways. A community that changes in response to disturbance but later returns to its normal state is called _______
Successful/succession
Resilient/resilience
Resistant/resistance
Trophic cascade

Answers

A community that changes in response to disturbance but later returns to its normal state is called resilient . Ecological terms a disturbance is an event that has drastic impacts on environmental conditions resulting in changes to the community and ecosystem.

Communities are dynamic and may respond to disturbances in several ways. Resilience is the ability of a community or ecosystem to respond to a disturbance by resisting damage and recovering quickly. A resilient ecosystem is one that can recover to its original state or adapt to a new state after a disturbance.

Resilient communities have a higher biodiversity, and more diversity leads to a better chance of survival for the species involved. Resilience is important because it allows ecosystems to persist and continue to provide essential services to human communities.

To know more about resilient visit :

https://brainly.com/question/1615958

#SPJ11

2 Shawna is very knowledgeable about cars. She subscribes to several different automobile magazines, has interviewe people who work on cars for a living, and has researched many types of cars. She started a blog with the information she has gathered. On her blog, she offers opinions about which cars are the best value for the money and which are the most difficult to repair. Which best describes the reliability of her work? O It is unreliable because it is on the Internet. O It is unreliable because it offers opinions, not scientific facts. O It is reliable because she gathered information from many sources. O It is reliable because it has information about all types of cars, not just her favorites.​

Answers

Shawna has extensive knowledge about cars, which she has gathered from various sources, including automobile magazines, interviews with car mechanics, and research on different types of cars is "It is reliable because she gathered information from many sources," is the best description of the reliability of her work.

Shawna's knowledge about cars is extensive, and she has gathered information from multiple sources. She has conducted interviews with people who work on cars, subscribed to several different automobile magazines, and researched many types of cars.

All of this information was used to create her blog, which offers opinions about which cars are the best value for the money and which ones are difficult to repair. Her blog provides valuable insights into the car industry, which are supported by her extensive research and knowledge.

Because Shawna has collected information from various sources, her work is reliable, and her opinions are based on solid facts. Furthermore, she has demonstrated that she has taken the time to learn about all types of cars, which means that she can provide valuable insights about cars beyond her favorites.

In conclusion, her work is reliable because she has gathered information from many sources.

Know more about automobile magazines here :

brainly.com/question/1472766

#SPJ8

you leave a hammer in the sun for several hours. when you pick it up, heat is transferred to your hand. how is most of the heat transferred?

Answers

When you leave a hammer in the sun for several hours and pick it up, heat is transferred to your hand. Most of the heat is transferred through conduction.

Conduction is a heat transfer process that occurs between objects that are in direct contact. When two objects with different temperatures come into contact with each other, heat flows from the hotter object to the colder object until they reach thermal equilibrium.

Thermal equilibrium occurs when the temperature of the two objects is the same. Therefore, when you pick up the hammer that has been exposed to the sun, the heat is transferred from the hammer to your hand through conduction.

The temperature of the hammer is higher than the temperature of your hand, so heat flows from the hammer to your hand until they reach thermal equilibrium. The hammer conducts heat to your hand because they are in direct contact. This results in an increase in temperature of your hand and a decrease in temperature of the hammer.

In conclusion, the heat that is transferred from the hammer to your hand when you pick it up after being exposed to the sun for several hours is mostly transferred through conduction.

Know more about  temperature here :

brainly.com/question/30528245

#SPJ8

Trace the path of urea from the time it reaches the kidneys by the renal artery and is expelled out through the urethra.​

Answers

Answer:

ExplananFrom the kidneys through the ureters to the bladder; from there through the urethra to be expelled from the body.tion:

how fossils fuels affect our environment? and what is biomass
energy? is it better use than the fossils fuels?

Answers

Fossil fuels like coal, natural gas, and oil have been used to power our modern industrial society for centuries. Although they have been extremely useful in meeting energy demands, they also have negative impacts on the environment.

These include Global warming: The primary issue caused by fossil fuels is the greenhouse effect. Carbon dioxide (CO2) and other greenhouse gases released by burning fossil fuels trap heat in the Earth's atmosphere, leading to global warming. Acid rain: The sulfur dioxide (SO2) and nitrogen oxide (NOx) produced by burning fossil fuels mix with water vapor and other chemicals in the atmosphere, causing acid rain. Acid rain causes damage to forests, lakes, and rivers, as well as to buildings and infrastructure.

Air pollution: Fossil fuels are responsible for air pollution, which can lead to respiratory problems and other health issues.Biomass energy is created by burning organic material, such as wood, crop waste, and animal manure, or by converting it into liquid biofuels. It is considered a renewable source of energy since biomass is constantly being produced and can be grown specifically for energy production.

To know more about Fossil fuels visit :

https://brainly.com/question/2029072

#SPJ11

Is the crRNA match the
DNA in the coding region or the promoter region?
HDR-NS ODN CGCCGGCG CTGGACGTCCGTACGTTCGAACCGTGACCGGCAGCAAAATGTTGCAGCACTGACCCTTTTGG 5' GAATTCGAGCTCGGTACCCGGGGATCCTCTAGAGTCGACCTGCAGGCATGCAAGCTTGGCACTGGCCGTCGTTTTACAACGTCGTGACTGGGAAAACCCTGGCGTTACCCAACT

Answers

The crRNA matches the DNA in the coding region.DNA is Deoxyribonucleic Acid a nucleic acid molecule that comprises a code that directs the synthesis of all proteins that make up an organism. It is composed of nucleotides that form a double helix structure.

CrRNA is a part of the CRISPR system and plays a significant role in the defense mechanism against viral infection. The crRNA provides a code to find a viral or bacterial genetic material for its degradation.

The coding region is the portion of DNA that provides information required for protein synthesis. It comprises exons and introns. The crRNA matches the DNA in the coding region in order to guide the Cas protein for the destruction of the target DNA sequences. Thus, we can conclude that the crRNA matches the DNA in the coding region.

CrRNA function in bacterial CRISPR system:

https://brainly.com/question/25558340

#SPJ11

gary and diane are preparing a garden. As part of their work, they must prepare the soil and plant 100 flowers. it would take diane 10 hours to prepare the soul and 12 hours for planting.
1. how much time would it take the two to complete the garden if they divide the soil prepration equally and the planting equally?
2. how much time would it take the two to complete the garden if they use compararive advantage and specialize in soil preparation or planting?

Answers

1. Time taken by Gary and Diane to complete the garden if they divide the soil preparation equally and the planting equally is 32 hours.

2. Time taken by the two to complete the garden if they use comparative advantage and specialize in soil preparation or planting is 34 hours.

1. To calculate the time taken by Gary and Diane to complete the garden, let's write the time taken by Gary to prepare the soil to be x hours. So, the time taken by Diane to prepare the soil will also be x hours. As given, Diane can plant 100 flowers in 12 hours. Thus, Diane can plant 25 flowers in 3 hours. Therefore, the time is taken by Diane to plant 100 flowers

= (100/25) × 3 = 12 hours.

Now, the time taken by Gary to plant 100 flowers will also be 12 hours. Therefore,

total time taken by both Gary and Diane to complete the garden = Time taken for soil preparation + Time taken for planting

= 2x + 12 hours = (2 × 10) + 12

= 32 hours

2.  To calculate the time taken by the two to complete the garden if they use comparative advantage and specialize in soil preparation or planting, we know that Diane can prepare the soil in 10 hours while Gary can prepare the soil in 20 hours. Therefore, Diane should prepare the soil. Now, the time is taken by Diane to prepare the soil = 10 hours. Diane can plant 100 flowers in 12 hours while Gary can plant 100 flowers in 24 hours. Therefore, Gary should plant the flowers.

Now, the time is taken Gary to plant the flowers = 24 hours. Therefore,

total time taken by both Gary and Diane to complete the garden = Time taken for soil preparation + Time taken for planting

= 10 + 24

= 34 hours

Learn more about comparative advantage: https://brainly.com/question/7780461

#SPJ11

Using an example from the literature describe to your classmate how the incorporation of nonnatural amino acids in proteins can be used to selectively and specifically functionalize a protein of interest to you. In addition, explain how you would go about determining if your attempts at modifying the protein with this strategy was successful.

Answers

Non-natural amino acids are the amino acids that are chemically synthesized and are not produced by natural cellular processes. Non-natural amino acids can be utilized in proteins to selectively and specifically functionalize a protein of interest.

To illustrate the incorporation of non-natural amino acids in proteins interest a non-natural amino acid that contains an azide functional group that can be used for chemical modifications. When incorporated into a protein can be selectively modified using chemical reactions .

This allows for the selective labeling of the protein of interest with biotin, which can be used for further detection or purification. Determining the success of protein modification with non-natural amino acids can be done using various methods. One way is to use mass spectrometry .

To know more about amino acids visit :

https://brainly.com/question/31872499

#SPJ11

3.
Explain the neurobiology of addiction, to include drug and reward
pathways.

Answers

The neurobiological mechanisms of addiction that are involved in various stages of the addiction cycle have a specific focus on certain brain circuits and the molecular/neurochemical changes associated with those circuits during the transition from drug-taking to drug addiction.

The neurobiology of addiction involves the interplay of several brain regions and neurotransmitter systems, particularly those related to the reward pathway. When an individual engages in addictive behaviors or consumes addictive substances, the brain's reward system is activated, leading to feelings of pleasure and reinforcement. Over time, this can result in the development of addiction.

One key brain region involved in addiction is the mesolimbic dopamine system, which includes the ventral tegmental area (VTA) and the nucleus accumbens (NAc). The VTA releases dopamine, a neurotransmitter associated with pleasure and reward, into the NAc in response to rewarding stimuli. This release of dopamine reinforces the addictive behavior or the effects of addictive substances, creating a positive association and driving further engagement in the behavior.

Drugs of abuse can directly or indirectly affect the reward pathway and dopamine release. For example, drugs like cocaine and amphetamines directly increase dopamine levels by blocking the reuptake of dopamine, leading to an accumulation of dopamine in the synapse and prolonged activation of the reward system. Other drugs, such as opioids and alcohol, indirectly affect dopamine release by activating specific receptors that modulate dopamine neurons.

In addition to the reward pathway, other brain regions and neurotransmitters play a role in addiction. The prefrontal cortex (PFC) is involved in decision-making, impulse control, and judgment. Chronic drug use can impair the functioning of the PFC, leading to poor decision-making and an increased likelihood of engaging in addictive behaviors.

The neurotransmitter glutamate also plays a crucial role in addiction. It is involved in learning and memory processes, and drug use can lead to changes in glutamate transmission in various brain regions. These changes contribute to the formation of drug-related memories and associations, making the brain more susceptible to craving and relapse.

Over time, repeated drug use can lead to neuroadaptations in the brain, altering the reward pathway and other brain circuits. These changes result in tolerance, where higher doses of the drug are needed to achieve the same effect, and withdrawal symptoms when drug use is discontinued. The persistent changes in the brain contribute to the cycle of addiction and the difficulty individuals face in quitting addictive behaviors.

To know more  neurotransmitter systems

https://brainly.com/question/32253977

#SPJ11

In an experiment about enzyme and catalyst. If you grind the radish, you will get what?

Answers

Try this class experiment to detect the presence of enzymes as they catalyse the decomposition of hydrogen peroxide

Enzymes are biological catalysts which increase the speed of a chemical reaction. They are large protein molecules and are very specific to certain reactions. Hydrogen peroxide decomposes slowly in light to produce oxygen and water. The enzyme catalase can speed up (catalyse) this reaction.

In this practical, students investigate the presence of enzymes in liver, potato and celery by detecting the oxygen gas produced when hydrogen peroxide decomposes. The experiment should take no more than 20–30 minutes.

Equipment

Apparatus

Eye protection

Conical flasks, 100 cm3, x3

Measuring cylinder, 25 cm3

Bunsen burner

Wooden splint

A bucket or bin for disposal of waste materials

Chemicals

Hydrogen peroxide solution, ‘5 volume’

Small pieces of the following (see note 4):

Liver

Potato

Celery

Health, safety and technical notes

Read our standard health and safety guidance.

Wear eye protection throughout. Students must be instructed NOT to taste or eat any of the foods used in the experiment.

Hydrogen peroxide solution, H2O2(aq) – see CLEAPSS Hazcard HC050 and CLEAPSS Recipe Book RB045. Hydrogen peroxide solution of ‘5 volume’ concentration is low hazard, but it will probably need to be prepared by dilution of a more concentrated solution which may be hazardous.

Only small samples of liver, potato and celery are required. These should be prepared for the lesson ready to be used by students. A disposal bin or bucket for used samples should be provided to avoid these being put down the sink.

Procedure

Measure 25 cm3 of hydrogen peroxide solution into each of three conical flasks.

At the same time, add a small piece of liver to the first flask, a small piece of potato to the second flask, and a small piece of celery to the third flask.

Hold a glowing splint in the neck of each flask.

Note the time taken before each glowing splint is relit by the evolved oxygen.

Dispose of all mixtures into the bucket or bin provided.

Teaching notes

Some vegetarian students may wish to opt out of handling liver samples, and this should be respected.

Before or after the experiment, the term enzyme will need to be introduced. The term may have been met previously in biological topics, but the notion that they act as catalysts and increase the rate of reactions may be new. Similarly their nature as large protein molecules whose catalytic activity can be very specific to certain chemical reactions may be unfamiliar. The name catalase for the enzyme present in all these foodstuffs can be introduced.

To show the similarity between enzymes and chemical catalysts, the teacher may wish to demonstrate (or ask the class to perform as part of the class experiment) the catalytic decomposition of hydrogen peroxide solution by manganese(IV) oxide (HARMFUL – see CLEAPSS Hazcard HC060).

If students have not performed the glowing splint test for oxygen for some time, they may need reminding of how to do so by a quick demonstration by the teacher.

Additional information

This is a resource from the Practical Chemistry project, developed by the Nuffield Foundation and the Royal Society of Chemistry. This collection of over 200 practical activities demonstrates a wide range of chemical concepts and processes. Each activity contains comprehensive information for teachers and technicians, including full technical notes and step-by-step procedures. Practical Chemistry activities accompany Practical Physics and Practical Biology.

do not write gibberish answer all questions properly for sheep eye dissection asap for grade 10

Question 1
Sketch a labeled sheep eye diagram of the eye. Upload your diagram.
Question 2
a) what is one difference you notice between a sheep's eye and a human eye

b) what does the differences you mentioned in part "a" suggest about a sheep's vision compared to a humans?
question 3
Explain how the flexible part of the eye works to change the ability of the eye to focus.
question 4: Describe how various parts of the eye function together to make an image appear on the retina
question 5: What is the function of the

a) sclera

b) cornea

c) optic nerve

d) lens

e) iris

f) pupil

6.The human eye has six externally attached muscles instead of only four like the sheep's. Predict how a humans eye might move differently that a sheep's eye/
7.If you enter a very bright room after being in the dark, what would happen to your pupils? If you are not sure try it.
8.Why does the optic nerve cause a blind spot?
9.why does the retina have to be smooth? Why not wrinkled? (Think about projecting a movie onto a flat screen or one that is wrinkled.)

Answers

Explanation:

Question 2:

a) One difference between a sheep's eye and a human eye is the shape of the pupil. In sheep, the pupil is horizontal and elongated, resembling a horizontal oval shape, while in humans, the pupil is round.

b) The difference in the shape of the pupil suggests that sheep have a wider field of vision horizontally compared to humans. Sheep may have better peripheral vision, particularly in detecting movements from the sides.

Question 3:

The flexible part of the eye that changes the ability to focus is the lens. The lens adjusts its shape through a process called accommodation, which is controlled by the ciliary muscles. When the ciliary muscles contract, the lens becomes thicker, allowing the eye to focus on nearby objects. When the ciliary muscles relax, the lens becomes thinner, enabling the eye to focus on distant objects.

Question 4:

Various parts of the eye function together to form an image on the retina. The cornea and lens refract incoming light, focusing it onto the retina. The retina contains photoreceptor cells called rods and cones, which convert light into electrical signals. These signals are then transmitted through the optic nerve to the brain, where they are interpreted as visual images.

Question 5:

a) The sclera is the tough, white outer covering of the eye. Its main function is to provide structural support and protection to the eye.

b) The cornea is the transparent, curved outermost layer of the eye. It refracts and focuses light entering the eye.

c) The optic nerve carries the electrical signals from the retina to the brain, allowing for visual information to be processed.

d) The lens, as mentioned earlier, helps to focus light onto the retina by adjusting its shape.

e) The iris is the colored part of the eye. It controls the size of the pupil and regulates the amount of light entering the eye.

f) The pupil is the opening at the center of the iris. It adjusts in size to control the amount of light entering the eye.

Question 6:

With the presence of six externally attached muscles, the human eye has more flexibility and range of movement compared to a sheep's eye. Humans can move their eyes in various directions, including side to side, up and down, and diagonally, allowing for greater visual exploration and scanning of the environment.

Question 7:

When you enter a very bright room after being in the dark, your pupils will automatically constrict or become smaller. This is a reflex response to the increased intensity of light, which helps to regulate the amount of light entering the eye and prevent overexposure.

Question 8:

The optic nerve causes a blind spot because it is the point where all the nerve fibers from the retina converge and exit the eye. At this location, there are no photoreceptor cells (rods or cones), resulting in a lack of visual perception in that specific area of the visual field.

Question 9:

The retina needs to be smooth to ensure the accurate and precise focusing of light onto the photoreceptor cells (rods and cones). If the retina were wrinkled or irregular, it would cause distortion and blur in the projected image, similar to projecting a movie onto a wrinkled screen. The smooth surface of the retina allows for proper reception and transmission of light signals to the brain, resulting in clear and accurate visual perception.

The questions on sheep eye dissection is answered as follows:

2a) One noticeable difference between a sheep's eye and a human eye is the shape of the pupil. In a sheep's eye, the pupil is rectangular or horizontally elongated, whereas in a human eye, the pupil is typically round.

2b) The difference in pupil shape suggests that a sheep's vision may be adapted for different lighting conditions than a human's.

3) The flexible part of the eye, known as the lens, changes its shape through a process called accommodation.

4) Various parts of the eye work together to form images on the retina. The cornea and lens refract incoming light to focus it onto the retina, forming an inverted image.

5) a) Sclera: The white, tough outer layer of the eye that provides protection and maintains the shape of the eye.

b) Cornea: The transparent front part of the eye that helps refract light onto the lens.

c) Optic Nerve: Transmits visual information from the retina to the brain.

d) Lens: Focuses light onto the retina by changing shape.

e) Iris: Controls the size of the pupil and the amount of light entering the eye.

f) Pupil: The small, adjustable opening in the center of the iris that regulates the amount of light entering the eye.

6) Humans have six externally attached eye muscles, allowing for a wider range of eye movements, including more precise control over gaze direction, tracking moving objects, and focusing on near and distant points.

7) When entering a very bright room, the pupils in your eyes will constrict or become smaller.

8) The optic nerve causes a blind spot because it is the point where all the retinal nerve fibers converge and exit the eye.

9) The retina must be smooth to ensure the accurate projection of images onto its surface. Wrinkles or irregularities in the retina would distort the image.

The detailed explanation is as follows:

2a) One noticeable difference between a sheep's eye and a human eye is the shape and orientation of the pupil. In a sheep's eye, the pupil is horizontal and rectangular, whereas in a human eye, the pupil is round and oriented vertically.

2b) The difference in pupil shape and orientation suggests that a sheep's vision is adapted to different lighting conditions compared to humans. The rectangular pupil allows for a wider horizontal field of view, which is advantageous for grazing animals like sheep to detect predators from various angles.

3) The flexible part of the eye, known as the lens, changes its shape through a process called accommodation. Tiny ciliary muscles surrounding the lens contract or relax, altering the curvature of the lens. When the ciliary muscles are relaxed, the lens becomes flatter, allowing it to focus on distant objects.

4) Various parts of the eye work together to create an image on the retina. The cornea and lens bend incoming light rays, forming a focused image on the retina at the back of the eye. The retina contains light-sensitive cells called photoreceptors (rods and cones) that convert the incoming light into electrical signals.

5) Functions of various eye parts:

a) Sclera: The sclera is the tough, white, outer layer of the eye that provides structural support and protection.

b) Cornea: The cornea is the clear, front surface of the eye that helps focus incoming light.

c) Optic Nerve: The optic nerve carries visual information from the retina to the brain.

d) Lens: The lens focuses light onto the retina by changing shape.

e) Iris: The iris controls the size of the pupil, regulating the amount of light entering the eye.

f) Pupil: The pupil is the black, central opening in the iris that allows light to enter the eye.

6) Humans have six extraocular muscles that attach to the eye, allowing for more precise and versatile eye movements compared to sheep. Humans can perform complex movements like rolling their eyes or tracking moving objects with greater agility.

7) When you enter a bright room after being in the dark, your pupils will constrict or become smaller. This is a natural response to excessive light to limit the amount of light entering the eye and protect the retina from overexposure to bright light.

8) The optic nerve causes a blind spot because it is the point where all the nerve fibers from the retina converge and exit the eye. This region lacks photoreceptors, making it unable to detect light. However, our brains fill in this gap in our visual field, so we don't usually perceive it consciously.

9) The retina must be smooth to accurately capture and transmit visual information to the brain. Any wrinkles or irregularities in the retina would distort the incoming light and create visual aberrations. Smooth retinas ensure that the image projected onto them is sharp and clear, allowing for accurate visual perception, much like a smooth movie screen is essential for clear and undistorted projections.

For more such questions on dissection:

https://brainly.com/question/10279840

#SPJ6

Question 13 (2 points)
Industrial pollution is darkening the bark of trees that the peppered moth lives on.
Over several generations, the moth population adapts a darker body color that helps
them camouflage and hide from predators.

Which statement is true about this population?

mutation for dark body color appeared in response to the pollution

White moths left the area and the dark moths stayed

The darkest moths were most likely to pas their genes to the next generation of
moths

Each moth adapted by changing its body color to suit the environment

Answers

The statement that is true about this population is:

The darkest moths were most likely to pass their genes to the next generation of moths.

In the scenario described, industrial pollution is darkening the bark of trees where the peppered moth lives. Over time, the moth population adapts to the changing environment by developing a darker body color that allows them to camouflage and hide from predators more effectively.

Natural selection plays a role in this adaptation process. As the tree bark becomes darker due to pollution, lighter-colored moths are more visible to predators, making them more susceptible to predation.

On the other hand, darker-colored moths have an advantage as they blend in with the darkened bark and are less likely to be detected by predators.

As a result, the darkest moths have a higher survival rate and are more likely to pass their genes for dark body color to the next generation. Over several generations, the proportion of dark-colored moths in the population increases due to this selective advantage.

Therefore, the statement that the darkest moths were most likely to pass their genes to the next generation is true in this case.

For more such answers on genes

https://brainly.com/question/1480756

#SPJ8

Ultraviolet light uv causes irreversible breaks in dna strands

Answers

That statement is partially correct. Ultraviolet (UV) light can cause damage to DNA molecules, including the formation of covalent bonds between adjacent pyrimidine bases, resulting in the formation of pyrimidine dimers.

These dimers can lead to structural distortions and breaks in the DNA strands. However, not all UV-induced DNA damage is irreversible.

Cells have repair mechanisms, such as nucleotide excision repair, that can recognize and remove the damaged DNA segments. This repair process helps to restore the integrity of the DNA molecule. However, if the DNA damage is severe or if the repair mechanisms are overwhelmed, the breaks in the DNA strands may become permanent and lead to mutations or cell death.

It's important to note that prolonged or excessive exposure to UV light, especially in the form of UV radiation from the sun, can increase the risk of DNA damage and the development of skin cancer. Therefore, protective measures such as wearing sunscreen, protective clothing, and avoiding excessive sun exposure are recommended to minimize the potential harmful effects of UV radiation on DNA.

learn more about DNA molecules here

https://brainly.com/question/29460453

#SPJ11

1. To survey and document the herbal plant species associated with traditional herbal treatment in Manipur and
Haryana, and to evaluate these traditional practices.
What to do: With reference to the content given by agricultural and forest department of respective states, find out
various herbal plants, parts of plant used for treatment, method of treatment, contribution of different tribes in herbal
treatment and its success rate.
Include pictures, graphs, statistical data, tables, charts etc.
Where to do: A4 size sheet
Parameters: 1. Accuracy 2. Illustrations 3. Presentation

Answers

The task requires conducting a survey and documentation of herbal plant species associated with traditional herbal treatment in Manipur and Haryana. The goal is to gather information about the various herbal plants, parts of plants used for treatment, methods of treatment, contributions of different tribes in herbal treatment, and the success rate of these traditional practices. The information should be presented on A4-size sheets and can include pictures, graphs, statistical data, tables, charts, and other illustrations. The parameters for evaluation will be accuracy, illustrations, and presentation.

The task involves conducting research and gathering information about herbal plant species and traditional herbal treatment practices in Manipur and Haryana.

The first step is to refer to the content provided by the agricultural and forest departments of the respective states.

These sources are likely to contain valuable information about herbal plants, the specific parts of plants used for treatment, methods of treatment, contributions of different tribes in herbal treatment, and possibly data on the success rate of these traditional practices.

To enhance the presentation of the gathered information, it is recommended to include visuals such as pictures, graphs, statistical data, tables, and charts.

These illustrations can help in effectively conveying the information and providing a visual representation of the data. It is important to ensure accuracy in the information presented and to maintain a clear and organized presentation format on A4-size sheets.

The evaluation of the project will be based on three parameters: accuracy, illustrations, and presentation.

Accuracy refers to the correctness and reliability of the information gathered. Illustrations encompass the use of visuals to enhance the understanding and presentation of the data.

The presentation involves the overall organization, clarity, and visual appeal of the A4-size sheets and the arrangement of information.

For more such answers on herbal plant

https://brainly.com/question/19038707

#SPJ8

What is one of the primary functions of olive oil food in the body?

Answers

Olive oil has several primary functions in the body, including:
Providing healthy fats: Olive oil is a healthy source of fatty acids that the body needs for cellular function, energy, and the absorption of certain nutrients

Reducing inflammation: Olive oil contains compounds that help regulate inflammation in the body, including polyphenols that inhibit inflammatory signaling pathways and reduce the upregulation of inflammatory enzymes

Promoting cardiovascular health: Olive oil consumption has been associated with improved cholesterol levels, better blood vessel function, and lower risk of developing cardiovascular disease

Supporting healthy memory: Olive oil consumption has been linked to better mood and stronger bones

Reducing the risk of certain cancers: Olive oil consumption has been associated with a lower risk of certain cancers, such as colorectal, endometrial, breast, pancreatic, and prostate cancers

Overall, olive oil is a healthy addition to the diet and offers several benefits for the body.

how would you conduct your investigation? in your answer, please explain you independent and dependent variables.

Answers

The person investigating should get all the information they reasonably can and need for the case. They should work out what physical evidence is needed based on:

1. what's laid out in the investigation plan.

2. what sources of information they can use.

Two indivduals would make slightly different proteins as a result of chromsomes true or false

Answers

True. Two individuals can make slightly different proteins as a result of differences in their chromosomes. Chromosomes carry genes, which contain the instructions for making proteins.

Each individual has a unique set of chromosomes inherited from their parents, and variations in the DNA sequence of genes can lead to differences in the proteins produced.

These genetic differences can arise through various mechanisms such as genetic mutations, genetic recombination during sexual reproduction, and the presence of different alleles (alternative forms of a gene) in the population. These variations in the DNA sequence can affect the structure and function of proteins, leading to individual differences in traits and characteristics among individuals.

learn more about Chromosomes here

https://brainly.com/question/30077641

#SPJ11

This terrestrial system is characterized by evergreen shrubs, mild, wet winters, and warm, dry summers. The vegetation in this area has adapted to frequent fires and is either fire resistent or uses fire to germinate its seeds.
Chaparral
Desert
Temperate Grasslands
Savanna

Answers

The terrestrial system characterized by evergreen shrubs, mild, wet winters, and warm, dry summers is called chaparral. This vegetation in this region has adapted to frequent fires and is either fire-resistant or uses fire to germinate its seeds.

Chaparral is a Mediterranean climate's ecosystem. It is characterized by mild, wet winters and warm, dry summers, as well as a diverse plant community that has adapted to frequent fires. The vegetation in this region is either fire-resistant or uses fire to germinate its seeds. Fire is necessary to remove dead plant material and return nutrients to the soil in this area.

Without regular fires, the chaparral would eventually become a dense forest and lose its distinctive characteristics.The plants in chaparral region:Some of the common plants of the chaparral include chamise, manzanita, ceanothus, toyon, and scrub oak. The vegetation in this area, which is adapted to fires, has the capacity to sprout new growth from a living root crown or underground bulb. Some plants also have seeds that require heat from a fire to germinate.

To know more about shrubs visit :

https://brainly.com/question/29187719

#SPJ11

Questions refer to David Attenborough's book "A Life on Our Planet"
1. David Attenborough is able to simplify complex ideas about biodiversity and the enviorment. Sometimes he does this by creating camparisons and associations with other ideas we are comfortable with. Sometimes he just simplifies a complex notion with clear thinking and simple words. Please provide a passage where he achieves this.

Answers

David Attenborough is a British natural historian, television presenter, and writer. In his book "A Life on Our Planet," he describes a variety of topics related to the environment and biodiversity. One of his notable characteristics is his ability to simplify complex ideas for his readers.

To illustrate this point, let's consider a passage from his book where he has simplified the complex idea with clear thinking and simple words. In his book, David Attenborough compares the human population to the fungal network of the forest. The fungal network, which is made up of a complex system of roots and fungi, functions as a communicative network for the forest's trees. In this context, the forest's trees are dependent on the network, and the network is dependent on the trees. In the same way, the human population is dependent on the natural world for its existence. However, human activities have put a strain on the natural world, and this has had adverse effects on the planet. Just like the fungal network is dependent on the trees, and the trees are dependent on the network, human beings are dependent on the environment, and the environment is dependent on human beings. David Attenborough's comparison of the human population to the fungal network is an excellent example of his ability to simplify complex ideas by creating associations with other ideas that we are comfortable with.

In this passage, he has conveyed the complex relationship between humans and the environment in a clear and simple way. Attenborough also describes how biodiversity is related to the planet's health and prosperity. According to him, biodiversity is a measure of the variety of living things that exist in an ecosystem. In his book, he notes that human activities have put a strain on the planet's biodiversity. The result has been a reduction in the number of species, which has had adverse effects on the planet's ecosystems. He goes on to explain that the reduction in biodiversity has led to an increase in diseases and other health problems. For instance, when the population of a particular species declines, the parasites that depend on it will have to find new hosts. This can lead to the spread of diseases to other species and ultimately to humans. Through his explanations, Attenborough is able to simplify complex ideas about biodiversity and the environment for his readers. In summary, his ability to create comparisons and associations with other ideas that we are familiar with and simplify complex notions with clear thinking and simple words makes him a great natural historian.

To know more about environment visit:

https://brainly.com/question/29885760

#SPJ11

Help! the hardy-weinberg equation is an expression showing the frequencies of 100 percent of the alleles for a specific gene in a population. what is occurring in the population if biologists show that both p and q are not changing over a period of time?

the population is decreasing in size.

the population is growing in size.

the population is not evolving.

Thee population is evolving.

Answers

Answer:

Explanation:

If biologists show that both p and q are not changing over a period of time according to the Hardy-Weinberg equation, it indicates that the population is not evolving. The Hardy-Weinberg equation is used to assess whether a population is in genetic equilibrium, meaning that the frequencies of alleles remain constant from generation to generation. If p and q, which represent the frequencies of different alleles, do not change, it suggests that the population is not experiencing any evolutionary processes such as natural selection, genetic drift, migration, or mutation. Therefore, the correct answer is:

The population is not evolving.

On the following page, draw the sequential steps of mitosis and meiosis from the starting cells at the very top label the cycle each cell is undergoing

Answers

Mitosis:

Interphase: The cell prepares for division by growing, replicating its DNA, and synthesizing necessary proteins.

Prophase: Chromatin condenses into chromosomes, the nuclear envelope breaks down, and the mitotic spindle forms.

Metaphase: Chromosomes line up at the center of the cell, and the spindle fibers attach to the centromeres of each chromosome.

Anaphase: Sister chromatids separate and are pulled towards opposite poles of the cell by the spindle fibers.

Telophase: Chromosomes reach the poles, the nuclear envelope reforms, and the cell undergoes cytokinesis, dividing into two daughter cells.

The resulting two daughter cells enter interphase and may repeat the mitotic cycle.

Meiosis:

Interphase: The cell undergoes a round of DNA replication, resulting in replicated chromosomes.

Meiosis I:

Prophase I: Homologous chromosomes pair up and undergo crossing over, exchanging genetic material.

Metaphase I: Homologous pairs align at the center of the cell, and spindle fibers attach to the homologous chromosomes.

Anaphase I: Homologous chromosomes separate and move towards opposite poles of the cell.

Telophase I: Chromosomes reach the poles, and the cell undergoes cytokinesis, resulting in two haploid daughter cells.

Meiosis II:

Prophase II: Chromosomes condense, the nuclear envelope breaks down, and spindle fibers form.

Metaphase II: Replicated chromosomes align at the center of each cell, and spindle fibers attach to the centromeres.

Anaphase II: Sister chromatids separate and move towards opposite poles.

Telophase II: Chromosomes reach the poles, nuclear envelopes reform, and cytokinesis occurs, resulting in a total of four haploid daughter cells.

I hope this text-based description helps you understand the sequential steps and labeling of the mitosis and meiosis cycles.

learn more about Mitosis here

https://brainly.com/question/29776367

#SPJ11

A. region A

B.region B

C.region C

D.region D

Answers

i believe it is region C

Do most mammals have adaptations for internal fertilization and internal development of the fetus or internal fertilization and external development of the fetus?

Answers

Answer:

internally

Explanation:

In mammals, fertilization takes place internally in the protected environment of the ampulla of the oviduct, as opposed to external fertilization where sperm and egg meet outside the parent's body (e.g., as in fish, reptiles, amphibians and invertebrates).

According to the diagram below, which animal class or classes have radial
symmetry?
THE EVOLUTION OF ANIMALS
CNIDARIANS
SPONGES
FLATWORMS
ROUNDWORMS
RADIAL
SYMMETRY
TISSUES
MOLLUSKS
OPSEUDOCOELOM
THREE GERM LAYERS;
BILATERAL SYMMETRY
ANNELIDS
MULTICELLULARITY
SINGLE-CELLED ANCESTOR
COELOM
PROTOSTOME DEVELOPMENT
ARTHROPODS
AN ECHINODERMS
CHORDATES
RADIAL
SYMMETRY
DEUTEROSTOME
DEVELOPMENT

Answers

Based on the diagram presented, the animal classes that have radial symmetry are cnidarians and echinoderms.

What is radial symmetry?

The term radial symmetry implies that the body parts of an organism are organized around a radius and due to this, if the body is divided with imaginary lines around the radius the parts are symmetrical.

This characteristic is found in some organisms, according to the diagram this characteristic can be found in cnidarians and echinoderms but not in other classes such as roundworms or mollusks.

Note: Below I attach the missing diagram:

Learn more about radial symmetry in brainly.com/question/15970176

#SPJ1

Sun
bear (Helarctos Malayans)
Describe two main threats to this species and sicuss the main
conservation actions which are needed to prevent this species from
becoming extinct.

Answers

Sun bear (Helarctos Malayans) is an omnivorous bear species found in tropical forests in Southeast Asia. The species is facing several threats, including habitat loss, hunting, poaching, and human-wildlife conflict. Below are two main threats to the Sun bear and the conservation actions necessary to prevent this species from becoming extinct.

Habitat loss The Sun bear's natural habitat is tropical rainforests in Southeast Asia. Unfortunately, due to rapid deforestation, the bear's habitat has declined significantly, leading to habitat loss. Forests are cleared to create agricultural land, plantations, and logging areas. Moreover, the increasing human population and infrastructure development projects such as mining and road construction have resulted in massive habitat fragmentation, which can also be disastrous for Sun bears.

The following conservation actions are needed to prevent Sun bears from becoming extinct:Creating protected areas for Sun bears Establishing national parks and protected areas is one of the most effective ways to conserve Sun bears and their habitats.Restoring degraded forests: Restoring degraded forests can provide new habitats for Sun bears and other threatened species.Conservation education: Educating the public about the importance of Sun bear conservation and sustainable resource use can lead to long-term positive changes. PoachingSun bears are poached for their body parts, mainly for traditional medicines, and for the pet trade. The bear's bile is used to make traditional Chinese medicine, and its gallbladder and paws are considered delicacies in some parts of Asia. Moreover, Sun bears are often hunted and killed for their fur and body parts, which are in high demand in the illegal wildlife trade.

To know more about omnivorous visit :

https://brainly.com/question/30761019

#SPJ11

a)Wetlands provide importants ecological goods and play critical ecological services.Discuss.
b) Elaborate on the classification of wetlands .
List 5 wetland systems.
C)As an official of NADMO ,outline an advocacy message for a prospective estate developer intent on a Wetland development (Hint: focus on recent flooding events in the capital).

Answers

Wetlands provide important ecological goods and play critical ecological services. Wetlands are critical ecological systems that provide various ecological benefits and perform crucial ecological services. They act as natural filters and purify the water that flows through them.

Wetlands play an important role in controlling the water level and reducing soil erosion by trapping sediments. Wetlands also act as breeding grounds for many fish species, amphibians, and birds. Wetlands are important habitats for migratory birds. Wetlands provide important ecological goods and play critical ecological services. Wetlands help in maintaining the biodiversity of an area, as they act as a home for many plant and animal species. Wetlands are natural storage systems that store water and recharge groundwater. Wetlands also provide natural resources, such as timber, fuelwood, and non-timber forest products, which are critical to the livelihoods of local communities. Wetlands are important recreational areas where people can engage in activities like fishing, bird-watching, and hiking. b) Elaboration: Wetlands can be classified into two main categories: coastal and inland wetlands. Inland wetlands can be further classified into three types: marshes, swamps, and bogs. Marshes are wetlands that are covered with grasses, while swamps are wetlands that are covered with trees. Bogs are wetlands that are characterized by a high concentration of peat, which is formed by the accumulation of dead plant material. There are five main wetland systems, which include the following: Rivers and lakes Wetlands associated with rivers and lakes are often located on the floodplains and provide important habitat for many aquatic species.

Bogs Bogs are wetlands that are characterized by a high concentration of peat, which is formed by the accumulation of dead plant material. Marshes Marshes are wetlands that are covered with grasses, and they are often located in areas with a high water table. Swamps Swamps are wetlands that are covered with trees, and they are often located in areas with a high water table. Estuaries Estuaries are wetlands that are located where freshwater meets saltwater. They are important breeding grounds for many marine species. C) Advocacy message: As an official of NADMO, my advocacy message for a prospective estate developer intent on a wetland development is to urge them to reconsider their development plans due to the recent flooding events in the capital. The recent flooding events have been attributed to the destruction of wetlands and the indiscriminate development of floodplains. Wetlands play a critical role in controlling the water level and reducing soil erosion by trapping sediments. Wetlands are also important habitats for many plant and animal species. Wetlands provide natural resources that are critical to the livelihoods of local communities. By developing wetlands, we risk destroying these crucial ecosystems and exposing communities to the risks of flooding and soil erosion. Therefore, I urge the prospective estate developer to reconsider their plans and to consider developing alternative sites that do not compromise the ecological integrity of wetlands.

To know more about ecological visit:

https://brainly.com/question/30460428

#SPJ11

Other Questions
QUESTION ONE a (i) Sodalite, Na4Al3(SiO4)3CI, is a member of the zeolite family. What method would you use to make sodalite, and what reagents would you use? (ii) For the synthesis of another member of the zeolite family, [(CH3)3(CH3(CH2)17)N]CI was added to the reaction mixture. What was the role of the ammonium salt? the given integral is,exdxwe subsutite , 3. Determine vector and parametric equations for the z-axis. Find the loss of head when a pipe of diameter 200 mm is suddenly enlarged to a diameter of 400 mm. The rate of flow of water through the pipe is 250 lit/sec. How many samples are needed for sample size to be considered as large A financial reporter commenting on benchmark rates stated that: "the risk-free LIBOR will be abolished and replaced by risk-free OIS rates." Critique the reporters statement.Could everyone do this and write a paragraph with citation and references. A 138 g charged ball is dropped into a deep hole. The ball has an excess of 34 x 10 electrons. After falling 73.5 m the ball enters a uniform magnetic field of 0.202 T pointing to the right.If air resistance is negligibly small, what is the magnitude of the magnetic force acting on the charge just after entering the magnetic field? ________ NWhat is the direction of the magnetic force acting on the charge just after entering the magnetic field? O To the right O Out of the screen O To the left O Into the screen Rick's Sporting Goods is a wholesale distributor supplying a wide range of moderately priced sporting equipment to large chain stores. Rick's Sporting Goods has an enviable reputation for quality of its products. In fact, the demand for its products is so great that at times Rick's Sporting Goods cannot satisfy the demand and must delay or refuse some orders, in order to maintain its production quality. Additionally, Rick's Sporting Goods purchases some of its products from outside suppliers in order to meet the demand. These suppliers are carefully chosen so that their products maintain the quality image that Rick's Sporting Goods has attained.About 60 percent of Rick's Sporting Goods' products are purchased from other companies while the remainder of the products are manufactured by Rick's Sporting Goods. The company has a Plastics Department that is currently manufacturing the boot for in-line skates. Rick's Sporting Goods is able to manufacture and sell 5,000 pairs of skates annually, making full use of its machine capacity at available workstations. Presented below are the selling price and costs associated with Rick's Sporting Goods' skatesSelling price per pair of skates $98Costs per pair Molded plastic $8Other direct materials 12Machine time ($16/hr.) 24Manufacturing overhead 18Selling and admin. cost 15 77Profit per pair $21------Because Rick's Sporting Goods believes it could sell 8,000 pairs of skates annually if it had sufficientmanufacturing capacity, the company has looked into the possibility of purchasing the skates for distribution.Colcott Inc., a steady supplier of quality products, would be able to provide 6,000 pairs of skates per year at a price of $75 per pair delivered to Rick's Sporting Goods' facility.Jack Potter, Rick's Sporting Goods' product manager, has suggested that the company could make better use of its Plastics Department by manufacturing snowboard bindings. To support his position, Potter has a market study that indicates an expanding market for snowboards and a need for additional suppliers. Potter believes that Rick's Sporting Goods could expect to sell 12,000 snowboard bindings annually at a price of $60 per binding. Potter's estimate of the costs to manufacture the bindings is presented below.Selling price per snowboard binding $60Costs per binding Molded plastic $16Other direct materials 4 Machine time ($16/hr.) 8Manufacturing overhead 6Selling and admin. cost 14 48Profit per binding $12===Other information pertinent to Rick's Sporting Goods' operations is presented below.An allocated $6 fixed overhead cost per unit is included in the selling and administrative cost for all of the purchased and manufactured products. Total fixed and variable selling and administrative costs for the purchased skates would be $10 per pair.In the Plastics Department, Rick's Sporting Goods uses machine hours as the application base for manufacturing overhead. Included in the manufacturing overhead for the current year is $30,000 of fixed, factory-wide manufacturing overhead that has been allocated to the Plastics Department.*Company & Employee names have been changed.==REQUIRED:1- To maximize Rick's Sporting Goods' profitability, recommend which product or products should be manufactured and/or purchased. 2- Prepare an analysis based on the data presented that will show the associated financial impact. Support your answer with appropriate calculations and strategic considerations. Please include other factors besides cost that Rick should take into consideration when making this decision. EX6-7 (Algo) The project information for the... The project information for the custom order project of the Air Control Company is presented here. Compute the early late activity times and slack times. Identify the critical path. How many days will the project take? Answer is not complete. "Calculate the molarity of a dilute Ba(OH)2 solution of 67.06 mL ofthe base to 0.6929 g of benzoic acid (MW=122.12 g/mole) required a5.4248 mL back-titration with 0.02250 M HCl. Exam3 PRACTICE Begin Date: 5/16/2022 12:01:00 AM-Due Date: 5/20/2022 11:59:00 PM End Date: 5/20/2022 11:59:00 PM (6%) Problem 11: A radioactive sample initially contains 175 mol of radioactive nuclei whose half-life is 6.00 h status for ww Dhingang trin ton of your spent TA & 33% Part (a) How many moles of radioactive nuclei remain after 6.00 h? &33% Part (b) How many moles of radioactive nuclei remain after 12.067 33% Part (c) How many moles of radioactive nuclei remain after 48 h File mol tus Grade Summary Dedactions 2). In the system given by the first problem you want to change the rpm of the pump from 1800 to 3600 . Calculate the new flow rate. Assume similarity and H p=acQv 2pump curve. 4). In problems 1) and 2) above calculate if the pump will cavitate. Use: H pv=0.3 m 15Drag each label to the correct location. Not all tiles need to be used.Match each technical meaning to the term it is associated with.a substance causing a quicker reaction to make something more livelya prolonged period of time to preserve something from decaya kind of paper made out of animal hide Was the time period beween 400 AD and 1400 AD a Dark Age for Europe? Was this a time of cultural decay and decline? I. Problem Solving - Design Problem 1A 4.2 m long restrained beam is carrying a superimposed dead load of (35 +18C) kN/m and a superimposed live load of (55+24G) kN/m both uniformly distributed on the entire span. The beam is (250+ 50A) mm wide and (550+50L) mm deep. At the ends, it has 4-20mm main bars at top and 2-20mm main bars at bottom. At the midspan, it has 2-20mm main bars at top and 3 - 20 mm main bars at bottom. The concrete cover is 50 mm from the extreme fibers and 12 mm diameter for shear reinforcement. The beam is considered adequate against vertical shear. Given that f'e = 27.60 MPa and fy = 345 MPa. why was the slaves being freed during the civil war most important Marks Water enters a double-pipe counter-current flow heat exchanger (internal pipe diameter = 2.5 cm) at 17C at a rate of 1.8 kg/s. The water is heated by steam condensing at 120C in the shell. If the overall heat transfer coefficient of the heat exchanger is 700 W/m2C, determine the length of the tube required in order to heat the water to 80C using (a) LMTD method [10 Marks] lot effective-NTU method [10 Marks] Fluid Properties: Water C = 4180 J/kgK, Steam hg = 2203 kJ/Kg A trader at the brokerage firm FastEx receives an order to purchase 2,000 shares of stock XYZ. At the time the order was received the market price of XYZ (i.e., the midpoint of the best bid and ask quotes) was $50.00. The trader then proceeds to execute the order. Initially the trader is able to purchase 1,000 shares at $50.50. Due to lack of liquidity the trader waits until the following day to execute an additional 800 shares at $51.00. Because t1 .ice has risen the trader decides not to purchase any more shares. Five days later (t=7) the stock closes at $52. FastEx charges brokerage of $0.08 per share, What is the Implementation shortfall cost ($)? Select one: a. 1840 b. 1696 C. 1440 d. 1844 QUESTION 1 Inserting a medical instrument through each eye socket was part of a a. the double-blind procedure. Ob. ECT. c. rTMS Od. a lobotomy. Consider a continuous-time system which has input of signal x[t) and output of y[n] - sin Ka. Evaluate and draw the impulse response of the above system. b. Determine whether this system is: (i) memoryless, (ii) stable, and (iii) linear. c. Determine and draw the output of the above system y[n] given that x[n]u[n+2]-[2-2]