how many 23- w lightbulbs can be connected in parallel across a potential difference of 75 v before the total current in the circuit exceeds 2.9 a ?

Answer:

3. descriptive

Explanation:

hope it helps :)

Angular velocity depends upon the radius of the sphere and the height of the incline when a solid sphere rolls without slipping down an incline plane. The correct options are b and c.

A sphere is a three-dimensional shape that is circular and completely round, like a ball or globe. Solid spheres, also known as balls, are objects with a radius and a center point that are fully enclosed by a curved surface in three dimensions.

The angular velocity of a solid sphere rolling down an incline plane without sliding depends on the radius of the sphere and the height of the inclination.

The angular velocity is unaffected by the length of the slope or the mass of the sphere. This is due to the fact that the angular velocity is governed by the sphere's moment of inertia and rotational kinetic energy, both of which are dictated by the sphere's form (radius) and the height of the incline.

Therefore, options are b and c are correct.

For more such questions on Angular velocity, click on:

https://brainly.com/question/29342095

#SPJ11

The probable question may be:

Starting from rest, a solid sphere rolls without slipping down an incline plane. at the bottom of the incline, what does the angular velocity of the sphere depend upon? check all that apply.

a. The angular velocity depends upon the length of the incline b. The angular velocity depends upon the radius of the sphere c. The angular velocity depends upon the height of the incline d. The angular velocity depends upon the mass of the sphere

The hollow spherical shell has a mass of 7.90 kg and a radius of 0.230 m. It initially rests and then rotates with a constant acceleration of 0.895 rad/s2 around a stationary axis that lies along a diameter. The kinetic energy of the hollow spherical shell is 2.12 J.

The first step is to calculate the angular displacement using the formulaθ = n × 2π = 5.00 rev × 2π/rev = 31.4 rad[The angular displacement here is a positive value, as the spherical shell is rotating in a counterclockwise direction]. The next step is to calculate the angular velocity after 5.00 rev, using the formula

ωf = ωi + αt, where ωi = 0 [initial angular velocity]α = 0.895 rad/s2 [angular acceleration n]t = 2.22 s [time taken to complete 5.00 revolutions]Therefore,ωf = 0 + 0.895 × 2.22 = 1.987 rad/s Kinetic energy of the shell, K = 1/2 I ω²where I is the moment of inertia of the shell.

The moment of inertia of a hollow spherical shell is given by

I = 2/3 M R² where M is the mass of the shell and R is the radius of the shellSubstituting values, K = 1/2 × 2/3 × 7.90 × (0.230)² × (1.987)²= 2.12 J [to 2 significant figures]

Therefore, the kinetic energy of the hollow spherical shell is 2.12 J after it has turned through 5.00 revolutions.

Learn more about kinetic energy  at  brainly.com/question/30886698

#SPJ11

The period of simple harmonic motion for this 3.00-kg object is approximately 6.87 seconds.

To find the period of simple harmonic motion for a 3.00-kg object with an amplitude of 6.00 m and a maximum acceleration of 5.00 m/s², we first need to find the angular frequency (ω).

We know the formula for the maximum acceleration in simple harmonic motion is given by:

amax = ω² * A

where amax is the maximum acceleration, A is the amplitude, and ω is the angular frequency.

Rearranging the formula to solve for ω, we get:

ω = sqrt(amax / A)

Plugging in the given values:

ω = sqrt(5.00 m/s² / 6.00 m)

ω ≈ 0.912 m^(-1/2) s^(-1)

Now that we have the angular frequency, we can find the period (T) using the relationship between angular frequency and period:

ω = 2π / T

Rearranging the formula to solve for T, we get:

T = 2π / ω

Plugging in the value of ω we found earlier:

T ≈ 2π / 0.912 m^(-1/2) s^(-1)

T ≈ 6.87 s

to know more about simple harmonic motion refer here:

https://brainly.com/question/30404816#

#SPJ11

The energy stored in the flywheel is approximately 32,949.6 Joules.

The energy stored in the flywheel can be calculated using the formula for rotational kinetic energy: KE = 0.5 * I * ω², where KE is the kinetic energy, I is the moment of inertia, and ω is the angular velocity.

For a solid cylinder, the moment of inertia (I) is given by the formula: I = 0.5 * M * R², where M is the mass and R is the radius.

Substituting the given values: I = 0.5 * 60 kg * (1.8 m)² = 97.2 kg m².

Now, we can find the kinetic energy: KE = 0.5 * 97.2 kg m² * (26.0 rad/s)² ≈ 32949.6 J.

So, the energy stored in the flywheel is approximately 32,949.6 Joules.

Know more about  angular velocity   here:

https://brainly.com/question/29566139

#SPJ11

The following best describes statistics : 2.) a way to analyze data.

Statistics can be described as a way to analyze data. It includes the collection, organization, analysis, interpretation and presentation of data.  Statistics deals with gathering, presenting and also arranging of information to make any decision.

Study and manipulation of data, including ways to gather, review, analyze, and draw conclusions from data is called statistics and two major areas of statistics are descriptive and inferential statistics.

Statistics are important as they help people make informed decisions. Governments, organizations and businesses collect statistics that helps them to track the progress, measure performance and then analyze problems.

To know more about statistics, refer

https://brainly.com/question/15525560

#SPJ1

The kinetic energy required for the satellite to attain a geosynchronous orbit is approximately 3.00 × 108 J.

When answering questions on Brainly, a question-answering bot should always be factually accurate, professional, and friendly, be concise and not provide extraneous amounts of detail, and use the following terms provided in the student question while also ignoring any typos or irrelevant parts of the question.

In response to the student question, we will calculate the gravitational potential energy and kinetic energy required for a 3120-kg satellite to attain a geosynchronous orbit.

Gravitational potential energyTo calculate the gravitational potential energy required to attain a geosynchronous orbit, we use the formula:U = -G (Mm/r)where U is the gravitational potential energy, G is the universal gravitational constant (6.67 × 10-11 N m2/kg2), M is the mass of the Earth (5.98 × 1024 kg),

m is the mass of the satellite (3120 kg), and r is the radius of the geosynchronous orbit (42,164 km).Substituting these values into the equation:U = -6.67 × 10-11 × 5.98 × 1024 × 3120 / 42,164 × 103U = -9.84 × 1010 JSo the gravitational potential energy required for the satellite to attain a geosynchronous orbit is approximately 9.84 × 1010 J.

Kinetic energyTo calculate the kinetic energy required to attain a geosynchronous orbit, we use the formula:KE = (1/2)mv2where KE is the kinetic energy,

m is the mass of the satellite (3120 kg), and v is the velocity of the satellite just before launch (456 m/s).Substituting these values into the equation:KE = (1/2) × 3120 × (456)2KE = 3.00 × 108 J

To learn more about : kinetic energy

https://brainly.com/question/8101588

#SPJ11

The  change in gravitational potential energy of the ball is 83.3 J.

When a ball of mass 5.0 kg is lifted off the floor a distance of 1.7m, what is the change in gravitational potential energy of the ball?The change in gravitational potential energy of the ball is determined by the formula given below;

ΔPEg=mgh

Where;ΔPEg = Change in gravitational potential energy.m = Mass of the object.

g = Acceleration due to gravity.

h = Height of the object.The mass of the ball is given as 5.0 kg,

and the height it was lifted is 1.7 m.

Acceleration due to gravity, g, is 9.8 m/s2.

Substituting these values in the above formula gives the change in gravitational potential energy of the ball.

ΔPEg= mgh

= 5.0 kg × 9.8 m/s2 × 1.7

m= 83.3 J

To learn more about : energy

https://brainly.com/question/25959744

#SPJ11

Answer: C for all of them

Explanation:

Because I'm smart

Jk

So basically its beacuse all of them have the same mixture since science can be interrelated and interchangebale in terms of formulas ok bye now

Thanks

Hope this helped you

Or not

Sorry if it didn't ig

[tex]Answer[/tex]

To find the resistance produced by a current of 120 amps from a 6V battery, we can use Ohm's law, which states that the voltage (V) across a resistor is equal to the current (I) flowing through the resistor multiplied by the resistance (R) of the resistor:

V = IR

In this case, we know that the current is 120 amps and the voltage is 6V, so we can rearrange the equation to solve for the resistance:

R = V/I

Substituting the given values, we get:

R = 6V / 120A = 0.05 ohms

Therefore, the resistance produced by a current of 120 amps from a 6V battery is 0.05 ohms.

The y-coordinate of the position vector at time t is (5/2)t² - 8t - 1/2.

It is given the velocity vector components as:

v(t) = (4t - 6) i + (5t - 8) j

To find the position vector at time t, we need to integrate the velocity vector with respect to time. integrate each component separately:

x(t) = ∫ (4t - 6) dt = 2t² - 6t + C1

y(t) = ∫ (5t - 8) dt = (5/2)t² - 8t + C2

where C1 and C2 are constants of integration. We can determine these constants by using the initial position of the particle given as:

r(0) = (2, -1)

At time t=0, we have:

x(0) = 2, y(0) = -1

Substituting these values in the expressions for x(t) and y(t), may get:

C1 = 2, C2 = -1/2

So, the position vector at time t is:

r(t) = (2t² - 6t + 2) i + ((5/2)t² - 8t - 1/2) j

To find the y-coordinate of the position vector at time t, may simply need to substitute t into the expression for y(t):

y(t) = (5/2)t² - 8t - 1/2

Therefore, the y-coordinate of the position vector at time t would be (5/2)t² - 8t - 1/2.

To know more about position

https://brainly.com/question/27771584

#SPJ4

Explanation: In a double beam spectrometer with a reference cell, interferences due to the light source, the environment, and the sample holder can be subtracted out of an air spectrum.

The reference cell is filled with a gas that is transparent and has no absorption bands in the spectral range of interest. The reference cell and the sample cell are alternatively placed in the path of the light source. The detector records the intensity of the light passing through both cells, which is then compared to the intensity of the light passing through the sample cell only.

By using the reference cell as a baseline, any interferences due to the light source or the environment (e.g., variations in temperature, pressure, or humidity) can be subtracted out, as these will affect the intensity of the light passing through both cells equally. Similarly, any interferences due to the sample holder or any contaminants in the sample can be subtracted out, as these will affect the intensity of the light passing through the sample cell only.

The result is a spectrum that reflects only the absorption or transmission of the sample itself, without interference from other sources.

When using a double beam spectrometer with a reference cell, several interferences can be subtracted out of an IR spectrum which are: Background absorption, Stray light, Sample cell absorption and Instrumental noise.

A spectrometer is an instrument that measures the light intensity and the wavelength of light. The double beam spectrometer works on the principle of the single beam spectrometer but with two beams of light. The use of a double beam spectrometer with a reference cell enables you to measure the absorption of infrared radiation at different wavelengths due to a specific chemical compound.

Interferences that can be subtracted out of an IR spectrum due to the usage of a double beam spectrometer with a reference cell:

1. Background absorption: Background absorption occurs when an IR beam from the source is absorbed by the atmosphere or by the instrument components. This absorption can be reduced by subtracting the IR spectrum of the reference material from the spectrum of the sample.

2. Stray light: Stray light is a problem that occurs when the IR beam from the source is not completely focused on the sample. This leads to a low intensity of the IR beam reaching the detector. It can be reduced by the use of appropriate filters.

3. Sample cell absorption: This is the absorption of the sample cell material that contributes to the IR spectrum. This can be corrected by subtracting the spectrum of the empty reference cell from the spectrum of the sample.

4. Instrumental noise: This is the background noise in the IR spectrum that is due to the instrument. It can be reduced by using appropriate signal processing techniques.

To know more about interferences, refer here:

https://brainly.com/question/16098226#

#SPJ11

Light is observed to converge to a point after being reflected from a plane mirror. The incident rays were diverging before striking the mirror.

Light is observed to converge to a point after being reflected from a plane mirror. This can only happen when the incident rays are diverging before hitting the mirror. When diverging rays strike the plane mirror, they reflect off the surface and follow the law of reflection.

The angles of incidence and reflection are equal, causing the rays to appear as if they are converging towards a point behind the mirror. This point is called the virtual focus or the virtual image, and it is not an actual physical point where light converges. Instead, it is the point where the reflected rays seem to be coming from when extended backward.

This phenomenon occurs because plane mirrors form virtual images of objects, and the images are the same distance behind the mirror as the object is in front of it.

For more such questions on Light, click on:

https://brainly.com/question/100983

#SPJ11

The cross-sectional area of the second wire is 1/16th that of the first wire. The resistance of the second wire is four times that of the first wire.

The resistance of a wire is given by the formula:

R = ρ × L / A

where R is the resistance, ρ is the resistivity of the material, L is the length of the wire, and A is the cross-sectional area of the wire.

Since both wires are made of the same material, their resistivities are the same. Let's denote the length and diameter of the first wire by L1 and D1, respectively, and the length and diameter of the second wire by L2 and D2, respectively. We are given that:

L2 = L1 / 2

D2 = D1 / 2

The cross-sectional area of a wire is given by the formula:

A = π × (D/2)^2

Substituting the given values, we have:

A1 = π × (D1/2)^2

A2 = π × (D2/2)^2

= π × (D1/4)^2

= (1/16) × A1

Therefore, the cross-sectional area of the second wire is 1/16th that of the first wire.

Now we can use the formula for resistance to find the resistance of the second wire:

R2 = ρ × L2 / A2

= ρ × (L1/2) / (1/16 × A1)

= (ρ × L1 × 16) / (2 × A1)

Since the first wire has a resistance of R1, we can substitute its value:

R2 = (ρ × L1 × 16) / (2 × A1)

= (ρ × L1 × 16) / (2 × π × (D1/2)^2)

= 4 × R1

Therefore, the resistance of the second wire is four times that of the first wire.

To learn more about resistance

https://brainly.com/question/11431009

#SPJ4

By Lenz's law, the induced current in the copper loop will flow in a clockwise direction when viewed from above the magnet.

Lenz's Law, which stipulates that the direction of the induced current is such that it opposes the change in magnetic flux that caused it, may be used to determine this. The magnetic flux through the copper loop grows as the magnet's north pole gets closer, causing a current to be induced and a magnetic field to be created that opposes the magnetic field that is getting closer. This necessitates that, when viewed from above the magnet, the induced current flow in a clockwise direction.

The magnetic flux through the copper loop also reduces as the magnet's north pole moves away from it, causing a current to flow through the loop and create an opposing magnetic field to the one that is leaving. To counteract the shift in magnetic flux, the induced current must continue to flow in a clockwise direction.

Hence, when viewed from above the magnet, the induced current in the copper loop will move in a clockwise direction.

To learn more about Lenz's law, refer to:

https://brainly.com/question/15610645

#SPJ4

Your question is incomplete. The complete question is:

The north pole of a magnet is at a set distance from a copper loop which is rotating as shown below. if you are looking at the loop from above the magnet, will you say the induced current is circulating clockwise, counterclockwise, or is equal to 0? Refer to the image attached to solve the question.

The energy density of butter and similar foods is 4.5 MJ/kg. This value represents the amount of energy stored in a given mass of food and is related to the food's calorie content.

The energy density (energy per mass) of butter and similar foods can be measured in megajoules per kilogram (MJ/kg). Energy density is important for understanding the amount of energy stored in a given mass of food, which is related to its calorie content.


1. Determine the macronutrient content of the food (i.e., grams of fat, carbohydrates, and protein per serving).
2. Multiply the grams of fat by 9 kcal/g, as fat provides 9 kcal of energy per gram.
3. Multiply the grams of carbohydrates and protein by 4 kcal/g, as both carbohydrates and proteins provide 4 kcal of energy per gram.
4. Add the energy content from each macronutrient to get the total energy content of the food.
5. Divide the total energy content by the mass of the food (in kg) to obtain the energy density (in MJ/kg).

Among the given answer choices, the correct energy density for butter and similar foods is 4.5 MJ/kg. This value is equivalent to 1,000 kcal/kg, as there are approximately 0.004184 MJ in 1 kcal. Butter and similar high-fat foods have high energy densities due to their high fat content, which provides more energy per gram compared to carbohydrates and proteins.

Know more about energy density here:

https://brainly.com/question/12959043

#SPJ11

Answer:

The earth rotates once each day.

We know that because the earth rotates daily and the sun rises in the east and sets in the west the moon must also rise in the east and set in  the west.

It takes the moon about 28 days to go around the earth so it will travel 1/28 the way around the earth in a single day so it will appear much like the sun,

Note that if we choose the earth to rotate counter clockwise about the sun the moon will also be rotating counter clockwise about the earth.

The moon rises in the east and sets in the west because earth rotates once each day.

Rotation refers to the act of rotating or spinning around an axis or center. The earth rotates, which means that it spins around its axis. The earth rotates once every 24 hours, which results in day and night.

Around the same time that Earth spins, the Moon orbits Earth. The moon's orbit is about 27.3 days long. That's why it takes roughly 27 days for the Moon to return to the same position relative to the sun and Earth each month. Because of the earth's rotation, the moon appears to rise in the east and set in the west.

The moon rises in the east and sets in the west because Earth rotates once each day. This rotation causes the appearance of celestial objects, like the moon, to move across the sky from east to west.

Learn more about Earth's Rotation here: https://brainly.com/question/28308953

#SPJ11

Electromagnetism fundamentally breaks away from the materialism associated with the physics of Newton and Democritus in that the electromagnetic field is physically real, even though it is not made of atoms.

This distinction is significant because both Newtonian physics and Democritus atomism rely on the idea that matter, made up of atoms or other particles, is the primary building block of the universe. Newtonian physics, based on the concept of gravity as the only force in the universe, focuses on the interaction of massive objects and their motion.

Democritus, an ancient Greek philosopher, proposed that the universe was made up of indivisible particles called atoms, which form various materials through their combinations. On the other hand, electromagnetism introduces the concept of electric and magnetic fields, which are not made of material particles or atoms.

Know more about   magnetic fields  here:

https://brainly.com/question/14411049

#SPJ11

In finding the mass flux of naphthalene after diffusing with a spherical particle, we need to calculate the mass transfer coefficient that can be measured to find out how much better the mass spreads to the surrounding.

The formula for mass transfer is  

[tex]Kg/m^{2s} = ( Sh *D)/r[/tex]

Where,

Sh = Sherwood number, D = diffusion coefficient

After calculating the mass transfer using the given formula it is easy to calculate the mass flux using Fick's Law

Fick's Law can be used in forming a formula that can help in finding the mass flux. Therefore,

The formula for Fick's Law is

[tex]J = -Kg/m^{2s} * (C1 - C2)[/tex]

Where

J = mass flux

C1 = presence of naphthalene on the surface of the particle

C2 = presence of naphthalene in the bulk fluid

To learn more about mass transfer,

https://brainly.com/question/13253822

#SPJ4

Person is moving at most  at a speed of 11.8 m/s

We can use the principle of conservation of energy.  In this scenario, the person starts at a height of 4.0 m and ends at a height of 5.0 m. Using the formula for gravitational potential energy, we can calculate that the initial potential energy is

[tex]63 kg * 9.81 m/s^2 * 4.0 m = 2474.04 J.[/tex]

At the top of the curve, all of this energy is converted into potential energy again, so the kinetic energy is zero.

[tex]63 kg * 9.81 m/s^2 * 5.0 m = 3085.05 J.[/tex]

Equating these energies, we get[tex]1/2 mv^2 = 3085.05 J[/tex],

where m is the mass of the person and v is the velocity. Solving for v, we get [tex]v = \sqrt{(2 * 3085.05 J / 63 kg)} = 11.8 m/s[/tex].

Therefore, the person is moving at a speed of 11.8 m/s upon leaving the waterslide.

To know more about conservation of energy, here

brainly.com/question/2137260

#SPJ4

If her center of mass accelerates only horizontally, the magnitude of the minimum static friction needed so she won't slip is 52 lb.

To find the speed increase of the player, we can utilize the equation a = Δv/Δt, where Δv = 15 ft/s (last speed) and Δt = 2 s (time taken to arrive at that speed). In this way, a = 7.5 ft/s².

To work out the base static erosion expected to forestall slipping, we want to consider the powers following up on the player. The player's weight acts descending (W = mg = 5.59 slug x 32.2 ft/s² = 180 lb), and the power of static erosion acts on a level plane the other way to the course of movement. The greatest power of static grinding is equivalent to the coefficient of static contact (μs) increased by the ordinary power (N = W).

Since the player isn't slipping, the power of static erosion should be equivalent to or more noteworthy than the power expected to evenly speed up her. Accordingly, we can set the power of static contact equivalent to ma*ma (mass x speed increase), which gives:

μsN = ma*ma

μs(W) = ma*ma

μs(180 lb) = (5.59 slug)(7.5 ft/s²)

μs = 0.29

In this manner, the extent of the base static grating required so she won't slip is 0.29 times the heaviness of the player, or around 52 lb.

To learn more about minimum static friction, refer:

https://brainly.com/question/29758225

#SPJ4

To make a proton undergo cyclotron motion, the magnetic field must be perpendicular to the direction of motion of the proton.

This is because the force on a charged particle moving in a magnetic field is given by the Lorentz force: F = q(v x B) where F is the force on the charged particle, q is the charge of the particle, v is the velocity of the particle, and B is the magnetic field. The direction of the force is perpendicular to both v and B, and is given by the right-hand rule. If the magnetic field is perpendicular to the direction of motion, the force will always be perpendicular to the velocity, which causes the proton to undergo circular motion in a plane perpendicular to the magnetic field. This is called cyclotron motion.

Learn more about magnetic field here:

brainly.com/question/24397546

#SPJ4

Answer:

[tex]1.2\; {\rm N}[/tex], assuming that all other forces on this crab were balanced.

Explanation:

The impulse [tex]J[/tex] on an object is equal to the change in momentum [tex]\Delta p[/tex]. In other words:

[tex]J = \Delta p[/tex].

If the mass [tex]m[/tex] of the object stays the same (as in the case of this question), the change in momentum can be rewritten as:

[tex]J = \Delta p = m\, \Delta v[/tex], where [tex]\Delta v[/tex] is the change in velocity.

Impulse is also equal to the net force on the object [tex]F_{\text{net}}[/tex] times the duration [tex]\Delta t[/tex] over which the force is applied:

[tex]J = F_{\text{net}}\, \Delta t[/tex].

Equate the two expressions for [tex]J[/tex] to obtain:

[tex]F_{\text{net}}\, \Delta t = m\, \Delta v[/tex].

In this question:

Rearrange [tex]F_{\text{net}}\, \Delta t = m\, \Delta v[/tex] and solve for the net force [tex]F_{\text{net}}[/tex]:

[tex]\begin{aligned}F_{\text{net}} &= \frac{m\, \Delta v}{\Delta t} \\ &= \frac{(3\; {\rm kg})\, (2\; {\rm m\cdot s^{-1}})}{5\; {\rm s}} \\ &= 1.2\; {\rm kg \cdot m\cdot s^{-2}} \\ &= 1.2\; {\rm N}\end{aligned}[/tex].

Assuming that all other forces on this crab are balanced, the net force on the crab would be equal to the force from the tide. Hence, the tide would have pushed the crab with a force of [tex]1.2\; {\rm N}[/tex].

When the water goes from the thicker hose out through the narrow nozzle, a fire hose exerts a force on the person holding it. To hold a 7.0-cm-diameter hose delivering through a 0.75-cm-diameter nozzle, the force required is 34.8 N.

How much force is required to hold a 7.0-cm-diameter hose delivering through a 0.75-cm-diameter nozzle, As per Bernoulli's equation, the pressure P of a fluid (liquid or gas) at any point along its path is equal to the sum of its static pressure (p0),

the kinetic energy per unit volume of the fluid (0.5ρv2),

and its potential energy per unit volume (ρgh),

where ρ is the density of the fluid, v is the velocity of the fluid, g is the acceleration due to gravity, and h is the height relative to a reference point of the fluid point in question. 0.5ρv1^2 + P1 + ρgh1 = 0.5ρv2^2 + P2 + ρgh2

The Bernoulli principle can be simplified to: F1/A1 = F2/A2

Where: F1 and F2 are the forces exerted by the fluid on the hose A1 and A2 are the areas of the hose and nozzle, respectively.

Substituting the values:F1 = (F2A1)/A2 = (A2/A1)ρv2^2A1 = (7/2)2π = 38.48 cm2A2 = (0.75/2)2π = 0.44 cm2v1 = v2 (since the water is incompressible)ρ = 1000 kg/m3Thus:F2 = 0.5ρv2^2A2F1 = 0.5ρv2^2A2 (A1/A2) = (0.5 × 1000 × v2^2 × 0.44) × (38.48/0.44)F1 = 34.8 N

Therefore, the force required to hold a 7.0-cm-diameter hose delivering through a 0.75-cm-diameter nozzle is 34.8 N.

For more such questions on force

brainly.com/question/14082273

#SPJ11

In a drum-buffer-rope system, the lot size that moves from one work center to another for additional processing is a "batch" size.

The drum-buffer-rope (DBR) system is a manufacturing scheduling method that aims to maximize throughput while minimizing inventory and operating expenses. In this system, the "drum" represents the bottleneck work center that determines the production rate for the entire system, and the "buffer" is a quantity of inventory strategically placed before the bottleneck to prevent downtime.

The "rope" refers to the mechanism used to synchronize production with demand, typically through a pull-based system that only allows material to be released to the next work center when the previous work center has completed its processing. This approach ensures that production is driven by actual demand and that inventory is minimized throughout the system, resulting in improved efficiency and profitability.

To know more about buffer, here

https://brainly.com/question/30167309

#SPJ4

--The complete question is, in a drum-buffer-rope system, the lot size that moves from one work center to another for additional processing is ______.--

An air temperature measuring device used to measure the temperature in a cooler must be accurate to within +/- 1 degree Celsius.

There are many different types of temperature measuring devices available, each with its own level of accuracy and precision.

In general, however, a high-quality air temperature measuring device should be accurate to within +/- 1 degree Celsius.

This level of accuracy is sufficient for most applications, including measuring the temperature inside a cooler. However, if a higher level of accuracy is required, such as in scientific or industrial settings, more precise devices may be necessary.

For more such questions on temperature, click on:

https://brainly.com/question/27944554

#SPJ11

Answer:

Its C

Explanation:

I took the test

As the volume of air in the lungs of the diver will reduce when she descends to 10m with air in her lungs without breathing in or out, the approximate new value will be 17.56 L, calculated using Boyle's law.

Boyle's law states that the pressure exerted by a given mass of gas is inversely proportional to its volume at a constant temperature. The mathematical expression for Boyle's law is: P1V1 = P2V2where, P1 and V1 are the initial pressure and volume of the gas, respectively, and P2 and V2 are the final pressure and volume of the gas, respectively.

Let V1 be the initial volume of air in the lungs of the diver, which is 6L. Let P1 be the atmospheric pressure at the surface of the water, which is 1 atm. Let P2 be the pressure at 10 m depth, which can be calculated using the hydrostatic equation: P2 = P1 + ρghwhere, ρ is the density of water, g is the acceleration due to gravity, and h is the depth of the water.

The density of water at standard temperature and pressure is 1000 kg/m3. Therefore, ρgh = 1000 kg/m3 × 9.81 m/s2 × 10 m = 98,100 Pa. Hence, P2 = 1 atm + 98,100 Pa = 2.05 atm. Substituting the values in Boyle's law equation, we get:1 atm × 6 L = 2.05 atm × V2. Therefore, V2 = (1 atm × 6 L) / 2.05 atm = 17.56 L. Approximately, the new value for the volume of air in the lungs of the diver would be 17.56 L.

Know more about Boyle's law here:

https://brainly.com/question/1437490

#SPJ11

Therefore, the momentum of the car is -22555 kg*m/s.

As a result, when the speed of a 1500 kg weighted car increases uniformly from 36 km/h to 72 km/h, the change in momentum is 15000 kgm/s.

In this instance, the car weighs 347 kg and travels at a speed of -65 m/s (negative velocity indicates that the car is moving to the left).

As a result, the car's momentum can be calculated as:

momentum = mass x velocity

momentum = 347 kg x (-65 m/s)

momentum = -22,555 kg m/s

To know more about momentum visit:-

https://brainly.com/question/30677308

#SPJ1

With the river bed. Assuming the contact area is proportional to the square of the particle's diameter:
F = τc × A
A ≈ D²

To calculate the critical tractive force necessary to dislodge a particle with an average Diameter of 70mm in a river bed, you can follow these steps:

1. Determine the particle's size (D) and convert it to meters: D = 70mm = 0.07m.

2. Calculate the submerged weight (Ws) of the particle. You'll need to know the specific gravity (G) of the particle material and the density of water (ρw). Assuming a typical specific gravity of 2.65 for sediment particles and water density of 1000 kg/m³:
Ws = (G - 1) × ρw × V × g
where V = (4/3)π(D/2)³ is the particle volume and g = 9.81 m/s² is the gravitational acceleration.

3. Calculate the critical shear stress (τc) using the Shields equation:
τc = ρw × g × R × (D/2)
where R is the submerged specific gravity, R = G - 1.

4. Determine the critical tractive force (F) by multiplying the critical shear stress by the particle's contact area (A) with the river bed. Assuming the contact area is proportional to the square of the particle's diameter:
F = τc × A
A ≈ D²

To Learn More About Proportional

https://brainly.com/question/1725541

#SPJ11

The approximate time difference between the first P-wave and the first S-wave recorded at a seismic station located 8000 kilometers from the earthquake’s epicenter would be 11 minutes 20 seconds.

Given the distance from earthquake’s epicenter (d) = 8000km

The approximate time difference between a P-wave and an S-wave can be calculated using the following formula:

From the diagram given we can see that the speed of P-wave (v1)= 8km/s

The speed of S-wave (v2) = 4.75km/s

We know that the time is calculated as distance per speed.

Then time taken for P-wave (t1) = d/v1

Time taken for S-wave (t2) = d/v2

Time Difference (t) = t1 - t2

Then, [tex]t = d/v1 - d/v2 = d((v2 - v1)/v1*v2)[/tex]

[tex]t = 8000 * (8 - 4.75/8 * 4.75)[/tex]

t = 680.4 seconds

So, for an earthquake epicenter located 8000 km away, the time difference would be:

Time Difference = 11 minutes 20 seconds

To learn more about distance click here https://brainly.com/question/11581397

#SPJ1