Answer:
The mass of lithium hypochlorite are 34.7 grams.
Explanation:
Moles of = 0.594 g. Molar mass of = 58.4 g/mol.
Ca + 2H2O → Ca(OH)2 + H2.
How many moles of H2O are needed to exactly react with 2. 0 moles of Ca?
To create one mole of H₂, 2.0 moles of Ca must be reacted with 4.0 moles of water.
From the balanced chemical equation:
Ca + 2H₂O → Ca(OH)₂ + H₂
we can see that 1 mole of Ca reacts with 2 moles of H₂O to produce 1 mole of H₂. Therefore, we need to calculate how many moles of H₂O are required to react with 2.0 moles of Ca.
If 1 mole of Ca reacts with 2 moles of H₂O, then 2.0 moles of Ca will react with:
2.0 moles Ca x (2 moles H₂O/1 mole Ca) = 4.0 moles H₂O
Therefore, 4.0 moles of H₂O are needed to react with 2.0 moles of Ca to produce 1 mole of H₂.
To learn more about moles refer to:
brainly.com/question/26416088
#SPJ4
What is the balanced equation for ammonia gas decomposes to form hydrogen gas and nitrogen gas?
what is not a characteristic of the halogen family?
The halogen family is a group of non-metallic elements located in group 17 or 7A of the periodic table. Some of the characteristics of the halogen family include:
They have a high electronegativity, meaning they tend to attract electrons towards themselves in chemical bonding.
They have a high electron affinity, meaning they tend to gain electrons in chemical reactions.
They are highly reactive and tend to form compounds with other elements, especially metals.
They exist in all three states of matter at room temperature, depending on the element. For example, fluorine and chlorine are gases, bromine is a liquid, and iodine is a solid.
They are diatomic molecules in their elemental form, meaning they exist as two atoms of the same element bonded together. For example, chlorine gas (Cl2) and fluorine gas (F2).
One characteristic that is not true of the halogen family is that they are good conductors of heat and electricity. In fact, they are poor conductors of heat and electricity, which is a common characteristic of non-metallic elements. Halogens are also not typically used as structural materials, as they tend to be brittle and have low melting and boiling points compared to metals.
To know more about halogen family, visit: brainly.com/question/13040817
#SPJ4
I need to know how to graph this
Answer:
bar graph
Explanation:
because of the fact that the data is shown in such a way that a line graph would not work, you need to graph the data for each individual time
At standard temperature and pressure, a given sample of water vapor occupies a volume of 2.80 L. How many hydrogen atoms are present in the container?
Explanation:
To determine the number of hydrogen atoms in the container, we need to know the number of water molecules present in the container.
At standard temperature and pressure (STP), which is defined as a temperature of 273.15 K and a pressure of 1 atmosphere (atm), one mole of any gas occupies a volume of 22.4 liters. Therefore, the number of moles of water vapor present in the container can be calculated as:
n = V/22.4
where V is the volume of the container in liters. Substituting the given value, we get:
n = 2.80/22.4 = 0.125
So, there are 0.125 moles of water vapor in the container.
Now, to determine the number of hydrogen atoms present in the container, we need to know the number of water molecules in the container, since each water molecule contains two hydrogen atoms. The number of water molecules can be calculated as:
N = n * N_A
where N_A is Avogadro's number, which is equal to 6.022 x 10^23 molecules per mole. Substituting the values, we get:
N = 0.125 * 6.022 x 10^23 = 7.528 x 10^22
So, there are 7.528 x 10^22 water molecules in the container, and since each water molecule contains 2 hydrogen atoms, the total number of hydrogen atoms in the container is:
2 * N = 2 * 7.528 x 10^22 = 1.506 x 10^23
Therefore, there are 1.506 x 10^23 hydrogen atoms present in the container.
what idea states that the volume of one mole of h2 gas at stp is assumed to be the volume of one mole of any gas at stp
Avogadro's Law is the notion that one mole of any gas has the same volume at STP (Standard Temperature and Pressure). identical volumes of gases at the same pressure and temperature have an identical number of molecules, according to Avogadro's Law.
This means that at STP, a mole of any gas will take up the same amount of space—22.4 liters—as another mole.
Avogadro's Law may therefore be used to determine the volume of hydrogen gas at STP, which is 22.4 liters for each mole. This is due to Avogadro's Law, which states that one mole of any gas at STP has the same number of particles (6.022 x 1023) and takes up the same amount of space (22.4 liters).
Avogadro's Law
A fundamental gas law called Avogadro's Law describes the correlation between a gas's volume and the number of particles it contains. identical volumes of gases at the same pressure and temperature have an identical number of molecules, according to this statement.
This indicates that one mole of any gas will have the same volume as 22.4 liters at standard temperature and pressure (STP), which is defined as 0°C (273.15 K) and 1 atmosphere (atm) of pressure. A mole, or 6.022 x 1023 particles, or Avogadro's number, is a unit of measurement that denotes a certain number of particles.
learn more about mole here
https://brainly.com/question/15356425
#SPJ1
Superheated steam at T 1 ( ° C ) T1(°C) and 20. 0 bar is blended with saturated steam at T 2 ( ° C ) T2(°C) and 10. 0 bar in a ratio (1. 96 kg of steam at 20 bar)/(1. 0 kg of steam at 10 bar). The product stream is at 250°C and 10. 0 bar. The process operates at steady state. Calculate T 1 T1 and T 2 T2, assuming that the blender operates adiabatically. If in fact heat is being lost from the blender to the surroundings, is your estimate of T 1 T1 too high or too low? Briefly explain
To solve this problem, we can use the conservation of mass and energy principles. The mass balance equation can be written as:
1.96 kg steam at 20 bar = x kg steam at T₁ and 20 bar + (1-x) kg steam at T₂ and 10 bar
Solving for x gives:
x = 0.9014
Therefore, 0.9014 kg of the total steam mass comes from the superheated steam stream, while the remaining 0.0986 kg comes from the saturated steam stream.
The energy balance equation can be written as:
(1.96 kg)(h₁) = (0.9014 kg)(h₁) + (0.0986 kg)(hf₂) + (product stream)
Solving for h₁, we get:
h₁ = 3449 kJ/kg
Similarly, solving for T₂ using the saturation table for steam at 10 bar gives:
T₂ = 179.9°C
To find T₁, we can use the steam tables to look up the enthalpy of superheated steam at 20 bar and use the energy balance equation to solve for T₁:
(1.96 kg)(3188 kJ/kg) = (0.9014 kg)(3449 kJ/kg) + (0.0986 kg)(hf(T₂)) + (product stream)
Solving for T₁ gives:
T₁ = 511.6°C
If heat is being lost from the blender to the surroundings, our estimate of T₁ would be too high. This is because if the system is losing heat, the energy balance equation would be incorrect since it assumes that all the energy input is used to heat up the steam. Thus, T₁ would be overestimated, and the actual value would be lower.
To learn more about energy balance equation refer to:
brainly.com/question/30313275
#SPJ4
When the temperature of a rigid hollow sphere containing 685 L of helium gas is held to 62C, the pressure of the gas is 1.89 * 10 ^ 3 * kPa . How many grams of helium does the sphere contain? (Round to 3 significant digits)
P stands for pressure and is 1.89 103 kPa. This is equivalent to 1.89 x 10310.325 x 18.65 atm.
when the 5.6 litres of compressed helium gas at STP?Thus, the value of $gamma $ is 1.664 for molecular formula gas such the precious gases He, Ne, or Ar and = 1.4 for diatomic gases, etc. The number of moles is n, while R is really the gas standard. As a result, 0.7L of 5.6L of argon gas at the STP is obtained by adiabatic compression.
What is included in a single helium atom?An molecule of something like the chlorine atom helium as known as a helium atom. Hydrogen is made up of two electrons connected either by electromagnetism toward a structure comprising two protons and either one or 2 particles, based on the isotope, bound together through a strong force.
To know more about equivalent visit:
https://brainly.com/question/29999744
#SPJ1
Determine if the following statements are true and false. Type true or false in the space provided.
Part A
To rinse the entire inner surface of the buret, one should add water from a wash bottle while rotating the buret.
Part B
Rinsing the buret with water is always enough to clean the buret.
Part C
To clean the inner surface of the buret, one should wash it with soapy water three times .
Part D
After rinsing with water and soapy water solution, one can add the titrating solution and begin the titration.
Part E
Always rinse a buret with the titration solution three times before beginning a titration.
The following statements are true or false:
A- To rinse the entire inner surface of the buret, one should add water from a wash bottle while rotating the buret. - True
B- Rinsing the buret with water is always enough to clean the buret. - False
C- To clean the inner surface of the buret, one should wash it with soapy water three times. - False
D- After rinsing with water and soapy water solution, one can add the titrating solution and begin the titration. - True
E- Always rinse a buret with the titration solution three times before beginning a titration. - False
To rinse the entire inner surface of the buret, one should add water from a wash bottle while rotating the buret. After using the buret, it is essential to clean it by rinsing it thoroughly. To do this, add water to the buret with a wash bottle while rotating it. This ensures that the whole inner surface of the buret is rinsed, which eliminates any residual substances.
Rinsing the buret with water is not always enough to clean the buret. While rinsing the buret with water is a crucial step in cleaning it, it is not always sufficient. Burets must be washed with soapy water to ensure that they are clean.
To clean the inner surface of the buret, one should not wash it with soapy water three times. Rather, the buret should be washed with soapy water once. The buret should be washed with a mild soap solution and then rinsed with water.
After rinsing with water and a soapy water solution, one can add the titrating solution and begin the titration. After cleaning the buret, the next step is to fill it with the titrating solution and begin the titration process.
One should not always rinse a buret with the titration solution three times before beginning a titration. After cleaning the buret, it should be rinsed thoroughly with water and not the titration solution. The titration solution should be added only when the buret is clean and ready for use.
To know more about titration refer here:
https://brainly.com/question/29312456#
#SPJ11
A compound with the molar mass 32 g/mol has an empirical formula of NH2.what is the molecular formula of the compound
The molecular formula of the compound is [tex]NH_4[/tex] ammonium.
The empirical formula is the simplest ratio of atoms of each element in a compound, expressed as a whole number. To determine the molecular formula, we need to multiply the number of atoms in the empirical formula by the molar mass of the compound.In this case, the empirical formula is [tex]NH_2[/tex], meaning that there is one nitrogen and two hydrogen atoms. The chemical has a 32 g/mol molar mass.Therefore, if we multiply the number of atoms in the empirical formula by 32 g/mol, we will get the molecular formula, which is [tex]NH_4[/tex], meaning that there are four nitrogen and eight hydrogen atoms.
Learn more about molar mass Refer:brainly.com/question/30216315
#SPJ1
Move your mouse cursor over the hydrochloric acid (HCl) and sodium hydroxide(NaOH) on the Materials shelf. You will see that the concentration of the sodium hydroxide is known to be 0.1 M while the concentration of hydrochloric acid is unknown.
Take a burette from the Containers shelf and place it on the workbench.
Add 50 mL of sodium hydroxide (NaOH) titrant. (50 mL is the capacity of a burette). Notice that it doesn't fill completely to the top mark. This is because there is space in the burette below the bottom mark. In addition, this is NOT the volume in the burette but rather this is your INITIAL READING. In the wet lab, you would need to let some of the solution flow through the stopcock in order to assure that the NaOH solution completely filled the volume of the burette down to the tip. You don't have to do that here.
Note the buret reading as your initial NaOH volume (mL). You can double click on the buret and select show close up to view the volume more closely.
Take a clean Erlenmeyer flask from the Containers shelf and place it on the workbench.
Add 10 mL of hydrochloric acid(HCl), unknown concentration, to the Erlenmeyer flask. Record the volume of HCL (mL).
Add 10 mL of water to the Erlenmeyer flask. This increases the total volume in the flask, making it easier to see the color change, but note that the value to use for the volume of hydrochloric acid HCl when calculating its concentration is still 10 mL.
Add 2 drops of phenolphthalein solution to the Erlenmeyer flask.
Move the Erlenmeyer flask anywhere on the base of the burette. The Erlenmeyer flask is connected to the burette so that liquid will drip from the burette into the Erlenmeyer Flask.
Flow of the titrant from the burette is controlled by the black knob at the bottom of the burette glass tube. You can deliver one drop of titrant with each short click of the black knob, and you can deliver a stream of titrant from the burette by clicking-and-holding the black knob - the longer you hold the knob, the more titrant will be delivered all at once. Here is what the setup on your workbench should look like:
TitrationTutorialPic
You are now ready to start the first coarse titration. Try to find the length of time required to click and hold the burette knob so that you deliver approximately 2 mL of sodium hydroxide from the burette to the Erlenmeyer flask. After each click of the knob, move the mouse cursor over the burette – this will enable you to see its current volume. To determine the amount of titrant delivered from the beginning until now, subtract the amount of liquid currently in the burette from the starting volume.
Continue to add the sodium hydroxide titrant in 2 mL increments. Each time, note the burette volume level. Note when the end point is passed (when the color of your solution changes). You now know between which two readings the endpoint occurred. For example, if you recorded 32 mL before the end point, but 34 mL was past the endpoint, record the 32 mL as your FINAL NaOH (mL). Calculate the volume of titrant that was added when 32 mL were delivered (subtract your INITIAL NaOH (mL) reading). You know that the FINE TITRATION can begin after approximately that amount of titrant.
Remove the Erlenmeyer flask from the burette and place them both in the Recycle Bin.
Take a clean Erlenmeyer flask from the Containers shelf and place it on the workbench.
Add 10 mL of hydrochloric acid, 10 mL of Water and 2 drops of phenolphthalein to the Erlenmeyer flask.
Place the Erlenmeyer flask at the base of a new burette.
Add 50 mL of sodium hydroxide titrant to the burette.
Add the initial large quantity of titrant, determined performing the coarse titration, (which in the example in #10, was 16 mL) so that you can begin with the fine titration. The solution in the Erlenmeyer flask should still be colorless.
Add sodium hydroxide from the burette drop-wise. This means adding a single drop at time which is done with single, short clicks on the black knob. You may decide to click and hold for short times, but in doing so you may miss the exact endpoint of the titration.
When the solution in the Erlenmeyer flask changes color, stop adding titrant. Record FINAL NaOH (mL) reading. Calculate the NaOH Delivered (mL) by subtracting the initial reading from the final reading.
In theory, we would repeat at least two more FINE TITRATIONS with fresh samples of HCl and full burets. However, since this is just a tutorial, exit the lab once you have a copy of your data and go to the assignments to calculate the concentration of the hydrochloric acid (HCl).
when read the procedures for this experiment, you find that you will need two burets. what is the purpose of the second buret?
The second buret is a necessary component of this titration experiment as it allows you to accurately measure the amount of HCl needed to reach the endpoint. It is also necessary to accurately calculate the amount of NaOH delivered in the reaction.
The purpose of the second buret in this experiment is to measure the amount of hydrochloric acid (HCl) needed to reach the endpoint of the titration. This is necessary because the concentration of the hydrochloric acid is unknown. By using a second buret to measure the HCl, it allows you to accurately titrate the NaOH solution until the solution in the Erlenmeyer flask changes color, indicating the endpoint of the titration. This measurement also allows you to calculate the amount of NaOH delivered in the reaction. In order to use a second buret for the experiment, it should be filled with the HCl solution and placed above the Erlenmeyer flask. To start, you should open the valve at the top of the buret, allowing the HCl to begin to flow into the Erlenmeyer flask. Then, you should slowly add the HCl until the solution in the flask changes color, which indicates the endpoint of the titration. After that, you should record the FINAL HCl reading from the buret and calculate the HCl delivered (mL) by subtracting the initial reading from the final reading.
To learn more about Titration ;
https://brainly.com/question/186765
#SPJ11
what products are formed when x, which contains both a lactone and an acetal, is treated with the reagent h3o . differentiate products by greater or lesser molecular mass.
When X, which contains both lactone and acetal, is treated with the reagent H3O+, it forms two products.
These products differ in molecular mass. The products are as follows:
Product 1: The first product is a cyclic hemiacetal. The acetal and lactone are both converted to hemiacetals, which are stable under acidic conditions. The formation of hemiacetal can be depicted using the following reaction: X + H3O+→ Hemiacetal This product is of lower molecular mass than X.
Product 2: The second product is an open-chain hemiacetal. The acetal and lactone are both converted to hemiacetals, which are stable under acidic conditions. The open-chain form of hemiacetal is more stable than the cyclic form, and it is therefore preferred. The formation of hemiacetal can be depicted using the following reaction: X + H3O+→ HemiacetalThis product is of higher molecular mass than X.
#SPJ11
For more information on lactone : https://brainly.com/question/29438490
Compound x is a ketone that was treated with two equivalents of a thioacetal (in the presence of an acid) to form a thioacetal. the thioacetal was then treated with raney nickel to form diphenylmethane. identify the structure of compound x.
Compound x can be identified as a ketone containing a carbonyl group,
Let's start by breaking down the reaction:
Compound x (ketone) + 2 thioacetal + acid → thioacetal (product)
Thioacetal (product) + Raney nickel → diphenylmethane
In the first step of the reaction, the ketone (compound x) reacts with two equivalents of thioacetal in the presence of an acid to form the thioacetal product.
The thioacetal product is then treated with Raney nickel in the second step to form diphenylmethane.
Based on the reaction, we can infer that the carbonyl group of a ketone is replaced by a thioacetal group (-S-CH2-) when it reacts with two equivalents of thioacetal in the presence of an acid. The resulting product then undergoes hydrogenation with Raney nickel to form diphenylmethane.
Therefore, Compound x can be identified as a ketone containing a carbonyl group, but without any other functional groups that may interfere with this reaction. Without additional information or data, it is impossible to identify the specific structure of Compound x.
To know more about ketone go through:-
https://brainly.com/question/24151172
#SPJ4
calculate the final pressure, in atm, after 9.06 g of krypton reacts with 10.0 g of fluorine at 300 k in a 10.0-l container.
The final pressure, in atm, after 9.06 g of krypton reacts with 10.0 g of fluorine at 300 k in a 10.0-l container is 0.935 atm.
Given the mass of krypton gas = 9.06g
the mass of fluorine gas = 10g
The temperature of gas = 300K
The volume of container = 10L
Let the final pressure = P
The balanced chemical equation for the reaction of krypton with fluorine is: [tex]Kr + 2F2 -- > KrF2 + F2[/tex]
We know the Molar mass of krypton = 83.798 g/mol
We know the Molar mass of fluorine = 18.998 g/mol
Moles of krypton = 9.06 g / 83.798 g/mol = 0.108 mol
Moles of fluorine = 10.0 g / 18.998 g/mol = 0.526 mol
Then, use the ideal gas law to calculate the initial pressure:
PV = nRT
[tex]P = (0.108 mol + 0.526 mol) * 0.082 * 300 K / 10.0 L[/tex]
P = 0.935 atm
Since the reactants are completely consumed, the total number of moles of gas in the container after the reaction will remain the same as before the reaction. Therefore, the pressure of the container after the reaction will also be the same as before the reaction.
To learn more about molar mass click here https://brainly.com/question/22997914
#SPJ1
According to the kinetic molecular theory, which statement best describes the motion of gas particles?
Gas particles move together in the same direction.
Gas particles are stationary.
Gas particles are only in motion when a gas is heated.
Gas particles are in continuous, random motion.
Gas particles are constantly moving quickly and randomly. Elastic collisions occur when gas particles collide with one another and with the container walls.
Which of the following statements most accurately sums up gas particle collisions according to the kinetic molecular theory?According to the kinetic molecular theory, gas particle collisions are completely elastic. When two objects collide in an elastic collision, their combined kinetic energy is preserved during the collision.
How would you explain gas particle motions using the kinetic molecular theory?According to the kinetic molecular theory, collisions between gas particles occur in perfect elastic motion and are always in motion. Boyle's and Charles's laws can both be explained by the kinetic molecular theory.
To know more about Elastic collisions visit:-
brainly.com/question/2288184
#SPJ1
14) How much solute should be dissolved in 50 mL of water at 50 degrees
to make a saturated solution?
Answer:
250 grams
Explanation:
so if you look at the temperature of 50 and go up from there and stop at the red line you should get 250 grams, not positive but 99% of me says yes.
Write a chemical equation for rusting of iron.
Best answer will be marked as brainliest :)
Answer:
I suppose it's 4Fe + 3O2 + 6H2O → 4Fe(OH)3
Explanation:
Iron needs both water and oxygen to oxidise and rust
What must be true about the work associated with a system in which the internal energy change is -200 kJ as 180kJ of heat is lost to the surroundings?
Answer:
Change in internal energy if 20J of heat is supplied to a system and gas in system has done 50J work during a thermodynamic process , will be. +30J.
A sample of uranium with Ar = 237.9, contains the three isotopes 234U, 235U and 238U.
Calculate the percentage abundance for the remaining two isotopes, given that the
percentage abundance of 234U is 0.006%. Give your answers to 3 decimal places.
The percentage abundance of 235U is 0.720%, and the percentage abundance of 238U is 99.274%, given that the percentage abundance of 234U is 0.006%. These values can be calculated by subtracting the percentage abundance of 234U from 100.
What is the significance of uranium in nuclear energy?Uranium is important in nuclear energy because it is a naturally occurring radioactive element that can undergo nuclear fission, which releases a significant amount of energy. Nuclear power facilities can use this energy to produce electricity.
What are the risks associated with uranium mining?Uranium mining can pose a variety of environmental and health risks. The mining process can generate large amounts of waste rock and tailings that can contaminate soil and water with radioactive materials. Exposure to these materials can increase the risk of cancer and other health problems.
Additionally, the transport and storage of uranium can pose a risk of accidental release, which can have significant environmental and health impacts.
To know more about uranium,visit:
https://brainly.com/question/31187694
#SPJ1
Select one option for each blank.
the brightness of a star depends on its ____(distance from earth, color, or composition), and stars that are closer look ____(brighter, dimmer, or white)
a solute with a mass of 76.4 g needs to be dissolved in water to make a solution with a 4.24% mass fraction. how much water is needed?
1804.7 g of water is needed achieve 4.24% mass fraction.
To make a solution with a mass fraction of 4.24 %, we need to dissolve 76.4 g of the solute in an appropriate amount of water.
To calculate the amount of water needed, use the following equation:
Mass fraction (%) = (Mass of solute / Mass of solution) x 100
Therefore, Mass of solution = (Mass of solute x 100) / Mass fraction (%)
Plugging in the given values,
we get: Mass of solution = (76.4 g x 100) / 4.24 = 1801.88 g
This means that 1804.7 g of water is needed to make a solution with a 4.24% mass fraction, using 76.4 g of the solute.
Learn more about mass fraction of CH₃COOH : https://brainly.com/question/30993253
#SPJ11
What is the general trend in densities for periods 2 and 3 in the periodic table?
The general trend in densities for periods 2 and 3 in the periodic table is an increase in density from left to right across the period.
This is due to the increase in atomic number and nuclear charge as one moves across the period. As the atomic number and nuclear charge increase, the attractive forces between the positively charged nucleus and the negatively charged electrons increase, causing the electrons to be more closely held and the atoms to be smaller in size. This results in an increase in the density of the elements in the period. The trend is not always followed consistently, and there are some exceptions, particularly in transition elements. For example, chromium and copper, which are transition metals, have densities that are lower than their neighboring elements due to their electronic configurations. In general, however, the trend is useful for predicting the properties of elements based on their positions in the periodic table. It is also helpful in identifying unknown elements based on their densities, particularly if they are in the same period as other known elements with similar densities.
To learn more about Densities :
https://brainly.com/question/13332658
#SPJ11
Read the passage and answer the next two questions.
Two students want to model thermal equilibrium. For this experiment, they will be
observing what happens when they mix two samples of water at different
temperatures. The students use the following procedure for the experiment.
Experiment 1 exhibiting thermal equilibrium
Step 1: Fill beaker A with 100 mL water and heat it using a Bunsen burner until
the thermometer measures 50°C. Record data.
Step 2: Fill beaker B with 100 mL of water at 20°C. Record data.
Step 3: Transfer the water from beaker A into beaker B.
Step 4: Record the temperature of the combined water sample.
10.The final temperature of the combined water from beakers A and B is 35°C.
Describe what happened in terms of kinetic energy of the particles when samples
A and B were combined.
11. The experiment modeled how two substances with varying temperatures will eventually reach thermal equilibrium on a macroscopic scale. Which statement best supports thermal equilibrium on a microscopic scale?
A. Beaker A has molecules of higher kinetic energy. These molecules collide with molecules from beaker B and transfer some of their energy. Energy is transferred until the average potential energy of the molecules from both samples are the same.
B. The molecules in beaker A are warmer than in beaker B, but both beakers have the same kinetic energy. Mixing the samples reduces the number of collisions in the samples.
C. Beaker A has molecules of lower kinetic energy. These molecules collide with molecules from beaker B and absorb energy until the average kinetic energy of the molecules from both samples are the same.
When the samples A and B are combined, the Kinetic energy of the particles will increase and in the second experiment option (C) best describes the thermal equilibirum on a microscopic level.
What is kinetic energy?Kinetic energy, which may be seen in the movement of an item or subatomic particle, is the energy of motion. Kinetic energy is present in every particle and moving object. Kinetic energy is a type of power that a moving object or particle possesses. An item accumulates kinetic energy when work, which involves the transfer of energy, is done on it by exerting a net force. A moving object or particle has kinetic energy, which depends on both its mass and its rate of motion. The type of motion can be vibration, rotation on an axis, translation (or travel along a path from one place to another), or any combination of these.
A body's translational kinetic energy, or 1/2mv², is determined by multiplying its mass, m, by the square of its velocity, v.
Know more about energy here:
https://brainly.com/question/1932868
#SPJ1
Answer:
When samples A and B were combined, the kinetic energy of the particles transferred from the particles with higher kinetic energy (from beaker A) to the particles with lower kinetic energy (from beaker B). This transfer of kinetic energy resulted in the particles in the combined water sample having a new, average temperature of 35°C.
Explanation :
The statement that best supports thermal equilibrium on a microscopic scale is: A. Beaker A has molecules of higher kinetic energy. These molecules collide with molecules from beaker B and transfer some of their energy. Energy is transferred until the average potential energy of the molecules from both samples are the same. This statement explains how the transfer of kinetic energy occurs between the molecules in beakers A and B, resulting in the eventual thermal equilibrium of the combined water sample.
for more such questions on kinetic energy
https://brainly.com/question/15438905
#SPJ11
what part of the experiment design in part i explains why the pattern changed to a constant relationship between the variables at higher values for mass of cuso4?
In the experiment design in part I, the part that explains why the pattern changed to a constant relationship between the variables at higher values for mass of CuSO4 is the controlled variable.
The controlled variable is the variable that stays the same throughout the experiment. It is also known as a constant variable, and it is not allowed to change. This is done so that the effects of the independent variable on the dependent variable can be observed.
The other variables in the experiment are independent variables and dependent variables. The independent variable is the variable that is changed in the experiment. The dependent variable is the variable that is being measured. In the experiment, the independent variable is the mass of CuSO4. The dependent variable is the absorbance value. The controlled variable is the concentration of CuSO4, the volume of the CuSO4 solution, the type of the solution, the type of the cuvette, and the wavelength used.
By keeping the concentration, volume, solution type, cuvette type, and wavelength used constant, the effects of these variables on the absorbance value can be eliminated. Therefore, any changes in the absorbance value are only caused by the changes in the independent variable, which is the mass of CuSO4.
Learn more about variables: https://brainly.com/question/25223322
#SPJ11
Explain 3 different ways that fossils can form? 30 points
Answer:
Fossils form in five ways: preservation of original remains, permineralization, molds and casts, replacement, and compression.
Explanation:
Rock formations with exceptional fossils are called very important for scientists to study. They allow us to see information about organisms that we may not otherwise ever know.
Fossils are formed in many different ways, but most are formed when a living organism (such as a plant or animal) dies and is quickly buried by sediment (such as mud, sand or volcanic ash). Soft tissues often decompose, leaving only the hard bones or shells behind (but in special circumstances the soft tissues of organisms can be preserved). After the organism has been buried, more sediment, volcanic ash or lava can build up over the top of the buried organism and eventually all the layers harden into rock
e) Give two uses of hydrogen gas.
Hydrogen can be used in fuel cells to generate electricity, or power and heat. Today, hydrogen is most commonly used in petroleum refining and fertilizer production, while transportation and utilities are emerging markets.
Please help!
Magnesium is the limiting reactant in this experiment. Calculate the theoretical yield of MgO for each trial.
Trial 1:
Trial 2:
Data
Mass of empty crucible with lid
Trial 1: 26. 688
Trial 2: 26. 681
Mass of Mg metal, crucible, and lid
Trial 1: 26. 994
Trial:2 26. 985
Mass of MgO, crucible, and lid
Trial 1: 27. 188
Trial 2: 27. 180
The theoretical yield of MgO for Trial 1 is 0.51 g and 0.5 g for trial 2
How to calculate the theoretical yield of MgO for both trials?The first step in these kinds of situations is to write out and balance your chemical reaction.
O2 + Mg + MgO
For Trival 1 and 2, we first need to calculate the moles of magnesium. We take the difference between the mass of the crucible with Mg and the mass of the empty crucible,
which is Trial 1: 26.994g - 26.688g = 0.306
Trial 2: 26.985g - 26.681g = 0.304
We then convert these to moles by dividing by the molecular weight of Mg (24.305 g/mol), which
Trial 1 0.306/24.305 = 0.0126
Trial 2 0.304/24.305 = 0.0125
The theoretical yield would be;
Trial 1; 0.0126 (24.305 + 16) = 0.507
Trial 2; 0.0125 (24.305 + 16) = 0.504
To calculate the percent yield,
Percent Yield = (Actual Yield / Theoretical Yield) x 100%
The answer provided above is based on the full question below;
Data Trial 1 Trial 2
Mass of empty crucible with lid 26.688g 26.681g
Mass of Mg metal, crucible, and lid 26.994g 26.985g
Mass of MgO, crucible, and lid 27.188g 27.180g
1a. Magnesium is the limiting reactant in this experiment. Calculate the theoretical yield of MgO for each trial
Find more exercises on theoretical yield;
https://brainly.com/question/12704041
#SPJ1
gaseous butane ch3ch22ch3 reacts with gaseous oxygen gas o2 to produce gaseous carbon dioxide co2 and gaseous water h2o. what is the theoretical yield of water formed from the reaction of 2.91g of butane and 13.5g of oxygen gas? be sure your answer has the correct number of significant digits in it.
The balanced chemical equation for the reaction between butane and oxygen to form carbon dioxide and water is shown below.2 C4H10(g) + 13 O2(g) → 8 CO2(g) + 10 H2O(g)We need to calculate the theoretical yield of water formed from the reaction of 2.91 g of butane and 13.5 g of oxygen gas.
To do this, we need to determine which of the two reactants is limiting and then use stoichiometry to calculate the amount of water produced. Butane reacts with oxygen in a ratio of 2:13. Therefore, to calculate the amount of oxygen needed to react with 2.91 g of butane, we use the following calculation: moles of butane = mass / molar mass = 2.91 g / 58.12 g/mol = 0.05 mol The moles of oxygen required = 0.05 mol × (13 mol of O2 / 2 mol of butane) = 0.325 mol So, the limiting reactant is oxygen because there is less of it than required. Using the stoichiometric ratio of the balanced chemical equation, we know that 10 mol of water is produced for every 13 mol of oxygen consumed.
Therefore, the number of moles of water produced can be calculated as follows: number of moles of water = 0.325 mol × (10 mol of H2O / 13 mol of O2) = 0.25 mol The mass of water produced can be calculated using its molar mass: mass of water = number of moles × molar mass = 0.25 mol × 18.02 g/mol = 4.505 g The theoretical yield of water formed from the reaction of 2.91 g of butane and 13.5 g of oxygen gas is 4.505 g of water.
Learn more about theoretical yield of water formed in reaction at: brainly.com/question/18566253
SPJ11
8.
7.
Calcium phosphate is found widely in nature, e.g. in bones and in the leaves of plants.
The formula for the phosphate ion is PO. Write the formula for calcium phosphate.
Boron fluoride reacts with ammonia, NH3, to make the compound shown in the
following equation.
BF3 + NH3
(i) Name the type of bond formed between N and B.
F
F
F-
F
F
F-B-N-H
(ii) Suggest a value for the F-B-F bond angle in this molecule.
Bond angle.
(iii) Explain your answer to part (ii).
F-B-N-H
H
H
H
H
[1]
[1]
[1]
[1]
******
Answer:
The formula for calcium phosphate is Ca3(PO4)2.
(i) The type of bond formed between N and B is a coordinate covalent bond or a dative bond. This is because the lone pair of electrons on the nitrogen atom is donated to the boron atom to form a bond.
(ii) The F-B-F bond angle in this molecule is expected to be approximately 120 degrees.
(iii) This is because the molecule has a trigonal planar geometry, with the boron atom at the center and three fluorine atoms at the corners of an equilateral triangle. The lone pair of electrons on the nitrogen atom is also located in the same plane as the three fluorine atoms, and it occupies one of the corners of the trigonal planar arrangement. Therefore, the F-B-F bond angle is expected to be approximately 120 degrees, which is the ideal bond angle for a trigonal planar geometry.
what is the sulfate ion concentration of the resulting solution when 75.0 ml of 1.50 m cuso4 and 50.0 ml of 1.00 m co2(so4)3 are mixed together?
To determine the sulfate ion concentration of the resulting solution, we first need to calculate the moles of sulfate ions in each solution, and then add them together.
For the CuSO4 solution:
moles of CuSO4 = concentration x volume in liters
moles of CuSO4 = 1.50 mol/L x 0.075 L
moles of CuSO4 = 0.1125 mol
Since there is 1 mole of sulfate ion for every mole of CuSO4, the moles of sulfate ion in the CuSO4 solution is also 0.1125 mol.
For the Co2(SO4)3 solution:
moles of Co2(SO4)3 = concentration x volume in liters
moles of Co2(SO4)3 = 1.00 mol/L x 0.050 L
moles of Co2(SO4)3 = 0.050 mol
Since there are 3 moles of sulfate ion for every mole of Co2(SO4)3, the moles of sulfate ion in the Co2(SO4)3 solution is 0.050 mol x 3 = 0.150 mol.
Now, we can add the moles of sulfate ions from each solution together to get the total moles of sulfate ions in the resulting solution:
total moles of sulfate ion = moles of CuSO4 + moles of Co2(SO4)3
total moles of sulfate ion = 0.1125 mol + 0.150 mol
total moles of sulfate ion = 0.2625 mol
To find the sulfate ion concentration of the resulting solution, we need to divide the total moles of sulfate ion by the total volume of the resulting solution, which is the sum of the volumes of the two solutions:
total volume = 75.0 mL + 50.0 mL
total volume = 125.0 mL or 0.125 L
sulfate ion concentration = total moles of sulfate ion / total volume
sulfate ion concentration = 0.2625 mol / 0.125 L
sulfate ion concentration = 2.10 mol/L
Therefore, the sulfate ion concentration of the resulting solution is 2.10 mol/L.
For more questions like sulfate concentration, visit the link below:
https://brainly.com/question/31214882
#SPJ11