How many liters would a 20 liter sample of gas at STP occupy if the


pressure was changed to 20 atmospheres and the temperature was changed to


38°C?

The number of moles of hydrogen gas comes out to be 5.700 that can be calculated using the ideal gas equation.

Using ideal gas equation,

PV = nRT ......(1)

It is given that,

T = 150.0 °C

P = 23.3 atm

V = 8.50 L

To calculate the number of moles, substitute the known values in equation (1).

PV = nRT

23.3 atm x 8.50 L  =  n x 0.0821 L atm/mol/K x 423.15 K

n = (23.3 atm x 8.50 L) / (0.0821 L atm/mol/K x 423.15 K)

  =  198.05 / 34.74 mole

  = 5.700 moles

To learn more about number of moles check the link below-

https://brainly.com/question/15356425

#SPJ4

The empirical formula of the compound is C₂H₆O₂N.

To determine the empirical formula, we need to find the mole ratios of the elements in the compound. First, we can calculate the moles of CO₂ and H₂O produced from the combustion reaction:

moles of CO₂ = 1.6 g / 44.01 g/mol = 0.0364 mol

moles of H₂O = 0.77 g / 18.015 g/mol = 0.0428 mol

Next, we can calculate the moles of C, H, and O in the original sample using the mass balance:

moles of C = moles of CO₂ = 0.0364 mol

moles of H = (moles of H₂O) x (2 H atoms per molecule) = 0.0856 mol

moles of O = (moles of CO₂) x (2 O atoms per molecule) = 0.0728 mol

Finally, we can calculate the moles of N using the separate measurement:

moles of N = 0.0403 g / 14.01 g/mol = 0.00287 mol

To get the empirical formula, we need to find the smallest whole number ratio of the elements. Dividing each of the moles by the smallest value (0.00287 mol) gives:

C = 12.64 / 0.00287 = 4.39 ≈ 4

H = 17.13 / 0.00287 = 5.96 ≈ 6

O = 25.38 / 0.00287 = 8.83 ≈ 9

N = 0.00287 / 0.00287 = 1

So the empirical formula is C₂H₆O₂N, which has a molar mass of 90.09 g/mol. However, this is only the empirical formula and not the molecular formula, which could be a multiple of the empirical formula.

Further analysis would be needed to determine the molecular formula of the compound.

To know more about empirical formula, refer here:

https://brainly.com/question/14044066#

#SPJ11

The balanced chemical equation for the reaction between sodium and sulfuric acid to form sodium sulfate and hydrogen gas is:

2Na + H2SO4 -> Na2SO4 + 2H2

From the given information, we can see that the reaction is limited by the amount of sodium available, since all of the sodium is used up in the reaction.

Therefore, we can use the amount of sodium to determine the amount of sulfuric acid that reacted and the amount of sodium sulfate that was formed.

1. Calculate the amount of sulfuric acid that reacted:

m(Sulfuric acid) = 25 g - 9 g = 16 g

n(Sulfuric acid) = m(Sulfuric acid) / M(Sulfuric acid) = 16 g / 98.08 g/mol = 0.163 mol

2. Calculate the amount of sodium sulfate formed:

Since the mole ratio of Na to Na2SO4 is 2:1, the number of moles of sodium used is:

n(Na) = m(Na) / M(Na) = 3 g / 22.99 g/mol = 0.1305 mol

The amount of sodium sulfate formed is also 0.1305 mol, since the mole ratio of Na to Na2SO4 is 2:1.

m(Na2SO4) = n(Na2SO4) x M(Na2SO4) = 0.1305 mol x 142.04 g/mol = 18.54 g

Therefore, 18.54 grams of sodium sulfate were formed in the reaction.

To know more about hydrogen  refer here

https://brainly.com/question/31018544#

#SPJ11

The mass of a sample of NH₃ containing 3.80 × 10²⁴ molecules of NH₃ is the product of the number of moles and the molar mass of NH₃.

To find the mass of a sample of NH₃ containing 3.80 × 10²⁴ molecules of NH₃.

Step 1: Determine the number of moles of NH₃
We know that there are 6.022 × 10²³ molecules in one mole of any substance (Avogadro's number). To find the number of moles of NH₃, divide the given number of molecules by Avogadro's number:
Number of moles = (3.80 × 10²⁴ molecules) / (6.022 × 10²³ molecules/mol)

Step 2: Calculate the molar mass of NH₃
NH₃ consists of one nitrogen (N) atom and three hydrogen (H) atoms. The atomic mass of nitrogen is approximately 14 g/mol, and the atomic mass of hydrogen is approximately 1 g/mol. So the molar mass of NH₃ is:
Molar mass of NH₃= (1 × 14 g/mol) + (3 × 1 g/mol) = 14 + 3 = 17 g/mol

Step 3: Find the mass of the sample
Now that we know the number of moles and the molar mass, we can find the mass of the sample by multiplying the two values:
Mass of the sample = Number of moles × Molar mass of NH₃

The mass of a sample of NH₃ containing 3.80 × 10²⁴ molecules of NH₃ is the product of the number of moles (calculated in step 1) and the molar mass of NH₃ (calculated in step 2).

To know more about molar mass :

https://brainly.com/question/20552052

#SPJ11

The ideal gas law states that the pressure of a gas is directly proportional to its temperature when held at a constant volume. This means that when the pressure is decreased, the temperature must also decrease.

To calculate the new temperature, use the equation P1/T1 = P2/T2, where P1 is the original pressure, T1 is the original temperature, P2 is the new pressure, and T2 is the new temperature.

Using the values given in the question, we get 1150/75.0 = 760/T2. Solving for T2, we get T2 = 49.6°C. Therefore, the final temperature of the gas is 49.6°C.

Know more about Ideal gas law here

https://brainly.com/question/28257995#

#SPJ11

At STP, 1.5 L of nitrogen gas will produce 3 L of NH₃ gas.

The balanced chemical equation for the reaction is N₂(g) + 3H₂(g) --> 2NH₃(g). According to the stoichiometry, 1 mole of nitrogen gas (N₂) reacts with 3 moles of hydrogen gas (H₂) to produce 2 moles of ammonia gas (NH₃). At STP, the volume of one mole of any gas is 22.4 L.

Step 1: Calculate the moles of N₂ in 1.5 L.
Moles of N₂ = (Volume of N₂ / 22.4 L/mol) = 1.5 L / 22.4 L/mol = 0.067 moles.

Step 2: Use the stoichiometry to find the moles of NH₃ formed.
Moles of NH₃ = 2 * Moles of N₂ = 2 * 0.067 moles = 0.134 moles.

Step 3: Calculate the volume of NH₃ formed at STP.
Volume of NH₃ = (Moles of NH₃ * 22.4 L/mol) = 0.134 moles * 22.4 L/mol = 3 L.

To know more about balanced chemical equation click on below link:

https://brainly.com/question/28294176#

#SPJ11

Answer:

When ammonium chloride dissolves in water, the absorption of heat occurs shows the reaction is an endothermic reaction. So, in the endothermic reaction, when the temperature increases, the value of the equilibrium constant also increases.

Explanation:

The coefficient in front of Cl₂ is 1, wen the equation is balanced

The balanced chemical equation for the reaction between Zinc and Chlorine gas is:

Zn + Cl₂ → ZnCl₂

To balance this equation, we need to make sure that the number of atoms of each element is equal on both the reactant and product side of the equation.

In this case, there is one Zinc atom and two Chlorine atoms on the reactant side, and one Zinc atom and two Chlorine atoms on the product side. So, the equation is already balanced.

Learn more about balanced equation at:

https://brainly.com/question/11904811

#SPJ1

CH₃COOC₅H₁₁ is the chemical formula for an ester. The structure of CH₃COOC₅H₁₁ is attached.

Esters are organic compounds that are formed from a reaction between a carboxylic acid and an alcohol. The ester formed from the reaction between acetic acid (CH₃COOH) and pentanol (C₅H₁₁OH) is CH₃COOC₅H₁₁.

The ester has a carbonyl group, which is a carbon atom double-bonded to an oxygen atom, that is located in the middle of the molecule. The carbonyl group is attached to an acetyl group (CH₃CO), which is a combination of a methyl group (CH₃) and a carbonyl group. The other end of the molecule is attached to a pentyl group (C₅H₁₁), which is a chain of five carbon atoms with eleven hydrogen atoms attached.

Esters are commonly used as fragrances and flavorings, and can be found in a variety of fruits and flowers. They also have many industrial applications, such as in the production of plastics, resins, and solvents.

To know more about ester here

https://brainly.com/question/31827356

#SPJ1

Correct option is d)0.36
To find the number of moles present, we can use the Ideal Gas Law formula:

PV = nRT

Where:
P = pressure (1.5 atm)
V = volume (6.2 L)
n = number of moles (which we need to find)
R = gas constant (0.0821 L atm/mol K)
T = temperature in Kelvin (38°C + 273.15 = 311.15 K)

Rearranging the formula to solve for n:

n = PV / RT

Plugging in the given values:

n = (1.5 atm * 6.2 L) / (0.0821 L atm/mol K * 311.15 K)

n ≈ 0.36 moles

Th answer is: d) 0.36

To know more about Ideal Gas Law:

https://brainly.com/question/27870704

#SPJ11

The prefixes cis- and trans- are used to describe stereoisomers, which are molecules that have the same molecular formula and connectivity but differ in their spatial arrangement. The correct answer is option c.

Specifically, they are used to describe molecules that have a carbon-carbon double bond or a ring structure.

Cis- and trans- indicate the type of stereoisomer, specifically geometric isomers. Cis- is used to describe molecules in which the two groups attached to the carbons of the double bond are on the same side, while trans- is used to describe molecules in which the two groups are on opposite sides of the double bond.

For example, in the molecule [tex]2-butene[/tex], there are two possible arrangements of the methyl ([tex]CH3[/tex]) and hydrogen (H) groups around the carbon-carbon double bond. If the two methyl groups are on the same side of the double bond, the molecule is called [tex]cis-2-butene[/tex]. If the two methyl groups are on opposite sides of the double bond, the molecule is called [tex]trans-2-butene[/tex].

The correct answer is option c.

To know more about stereoisomer refer to-

https://brainly.com/question/31147524

#SPJ11

The heating process is often used in experiments to evaporate liquid and concentrate the sample. If the heating was stopped before all of the liquid could evaporate, this would have a significant impact on the results of the experiment.

Firstly, the concentration of the sample would be lower than expected. This could affect the accuracy and precision of any measurements or analyses performed on the sample.

For example, if the sample was being analyzed for the presence of a certain compound, the lower concentration may make it more difficult to detect or quantify the compound accurately.

Additionally, the incomplete evaporation of the liquid could lead to contamination of the sample. If the liquid is not fully evaporated, there may be impurities or other compounds present in the final sample that were not accounted for in the experimental design. This could affect the validity of the results and the interpretation of the data.

In summary, the premature stopping of heating in an experiment could lead to lower sample concentration and potential contamination, both of which could have significant implications for the results and conclusions drawn from the experiment.

To know more about heating process, visit:

https://brainly.com/question/10219607#

#SPJ11

0.70 g of CuCl₂ • 2 H₂O reacts completely with 0.48 g of Al. The molar ratio of CuCl₂ • 2 H₂O to Al is 1:2. The reaction completes without any excess reactant.

The balanced chemical equation for the reaction between CuCl₂ • 2 H2O and Al is:

3CuCl₂ • 2 H₂O + 2Al → 3Cu + 2AlCl₃ + 6H₂O

From the equation, we can see that 3 moles of CuCl₂ • 2 H₂O react with 2 moles of Al. We need to find the amount of Al required to react completely with 0.70 g of CuCl₂ • 2 H₂O.

1 mole of CuCl₂ • 2 H₂O has a mass of (63.55 + 2 x 35.45 + 2 x 18.02) g = 170.48 g

0.70 g of CuCl₂ • 2 H₂O is equal to 0.70/170.48 = 0.0041 moles of CuCl₂ • 2 H₂O

From the balanced equation, we can see that 3 moles of CuCl₂ • 2 H₂O react with 2 moles of Al.

Therefore, the moles of Al required is (2/3) x 0.0041 = 0.0027 moles.

The molar mass of Al is 26.98 g/mol. Therefore, the mass of Al required is:

0.0027 moles x 26.98 g/mol = 0.073 g

Therefore, 0.073 g of Al should be used to complete the reaction without either reactant being in excess.

To know more about the molar ratio refer here :

https://brainly.com/question/17920577#

#SPJ11

Complete question :

If we began the experiment with 0.70 g of CuCl₂ • 2 H₂O, according to the stoichiometry of the reaction, how much Al should be used to complete the reaction without either reactant being in excess? Show your calculations.

This investigation will explain why Joe's 2kg barbell was much hotter than his 10kg barbell after being left in the sun for the same amount of time. Heat is transferred through a process called conduction, which is the direct transfer of thermal energy between two objects in contact. This process is directly proportional to the thermal conductivity of the material and the surface area between the two objects.

Since Joe's 2kg barbell has a smaller surface area than his 10kg barbell, it will experience more heat transfer in a given time period, making it hotter than the 10kg barbell.

Additionally, certain materials have higher thermal conductivities than others, meaning they can transfer heat more quickly. Thus, the material of both barbells could also have a significant effect on the amount of heat transferred to each.

Ultimately, this investigation will explain why Joe's 2kg barbell became hotter than his 10kg barbell in a similar time period, based on their respective surface areas and the materials of which they are made.

Know more about Thermal energy here

https://brainly.com/question/18989562#

#SPJ11

When, 1 mole of methane at 25°C in a 244.6 mL bulb would exert a pressure of 2.79 atm assuming it behaves as a real gas and obeys the van der Waals equation.

First, let's calculate the pressure exerted by 1 mole of methane at 25°C assuming it behaves as an ideal gas;

We can use Ideal Gas Law to calculate the pressure;

PV = nRT

where P is pressure, V is volume, n is number of moles, R is gas constant, and T is the temperature in Kelvin.

Converting the volume of the bulb to liters and the temperature to Kelvin;

V = 244.6 mL = 0.2446 L

T = 25°C = 298 K

For 1 mole of methane;

n = 1 mole

The gas constant for the Ideal Gas Law is;

R = 0.0821 L·atm/(mol·K)

Substituting the values into Ideal Gas Law equation;

P = (nRT) / V

P = (1 mole) x (0.0821 L·atm/(mol·K)) x (298 K) / (0.2446 L)

P = 3.24 atm

Therefore, 1 mole of methane at 25°C in a 244.6 mL bulb would exert a pressure of 3.24 atm assuming it behaves as an ideal gas.

Now, let's calculate the pressure exerted by 1 mole of methane at 25°C assuming it behaves as a real gas and obeys the van der Waals equation;

The van der Waals equation is;

(P + a(n/V)²) (V - nb) = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, T is the temperature in Kelvin, a is a constant that takes into account the attractive forces between molecules, b is a constant that takes into account the volume of the molecules, and (n/V) is the molar density.

For methane, the values of the van der Waals constants are;

a = 2.253 atm L²/mol

b = 0.0428 L/mol

Substituting the values into the van der Waals equation and solving for P;

P = (nRT / (V - nb)) - (a(n/V)² / V²)

P = (1 mole) x (0.0821 L·atm/(mol·K)) x (298 K) / (0.2446 L - (0.0428 L/mol x 1 mole)) - (2.253 atm L²/mol² / (0.2446 L)²)

P = 2.79 atm

Therefore, the pressure is  2.79 atm.

To know more about van der Waals equation here

https://brainly.com/question/5803619

#SPJ4

Answer:

This data gives a relationship between amount of solute and volume of solution: 5.67 g KCl /. 100.0 mL. To find molarity we must convert grams KCl to moles hope this helps

Explanation:

The new concentration of the solution can be calculated using the dilution formula, which states that the initial concentration multiplied by the initial volume (V1) is equal to the new concentration multiplied by the new volume (V2).

In this case, the equation would be: (3.5M)(0.20L) = (xM)(0.90L). Solving for x, we get the new concentration of the solution as 3.17M.

In other words, when a 3.5M solution of lici is diluted from 0.20L to 0.90L, the new concentration of the solution is 3.17M. This is because when the volume of a solution is increased, the concentration of the solution decreases proportionately.

Thus, when the volume of the solution is increased by a factor of four and a half, the concentration of the solution is reduced by the same factor.

Know more about Dilution formula here

https://brainly.com/question/30781795#

#SPJ11

The pinacol rearrangement more often use the sulfuric acid, H₂SO₄ , as the acid catalyst rather than the hydrochloric acid, HCl is because H₂SO₄ have the more proton than that of the HCl.

The pinacol rearrangement process will takes place through 1,2-rearrangement. This rearrangement will involves the shift of the two adjacent atoms. Pinacol is the compound which has the two hydroxyl groups, each of the attached to the vicinal carbon atom. It is the solid organic compound which is the white.

The H₂SO₄ have the more proton than that of the HCl. This will makes the pinacol rearrangement more often use the sulfuric acid H₂SO₄ , as the acid catalyst and rather than the hydrochloric acid, HCl.

To learn more about pinacol rearrangement here

https://brainly.com/question/29523437

#SPJ4

The decay process of each isotope depends on their half-lives. The half-life is the amount of time required for half of the initial sample to decay.

U-238 has a half-life of 4.5 billion years, which means it takes billions of years for half of the U-238 to decay. Th-234 has a half-life of 24 days, which is relatively short compared to U-238. Ra-226 has a half-life of 1,600 years, which is shorter than U-238 but longer than Th-234. Po-214 has a half-life of 164 microseconds, which is incredibly short compared to the other isotopes. Pb-206 is a stable isotope, which means it does not undergo radioactive decay.

Therefore, the decay of Po-214 to Pb-206 is the fastest decay process of the four isotopes mentioned above, and the decay of U-238 to Th-234 is the slowest. The decay of Th-234 to Ra-226 and Ra-226 to Po-214 are intermediate decay processes.

To know more about isotope refer here

https://brainly.com/question/12955625#

#SPJ11

The predicted phenotypic outcome of this cross will be that 75% of the offspring will have a round phenotype, while 25% will have a wrinkled phenotype.

To predict the phenotypic and genotypic outcome of a cross between two plants heterozygous for round peas, we need to first understand the genetics involved.

Round peas are dominant over wrinkled peas, which means that the genotype for round peas can be either homozygous dominant (RR) or heterozygous (Rr), while the genotype for wrinkled peas is homozygous recessive (rr).

When two plants heterozygous for round peas are crossed (Rr x Rr), there are three possible genotypic outcomes for their offspring: RR, Rr, or rr. However, because round peas are dominant, any offspring with at least one R allele (RR or Rr) will have a round phenotype.

Therefore, the predicted phenotypic outcome of this cross will be that 75% of the offspring will have a round phenotype, while 25% will have a wrinkled phenotype. The predicted genotypic outcome will be that 25% of the offspring will be homozygous dominant (RR), 50% will be heterozygous (Rr), and 25% will be homozygous recessive (rr).

To know more about phenotype, visit:

https://brainly.com/question/20730322#

#SPJ11

40.32 grams of hydrogen gas will be produced.

According to the balanced chemical equation:

1 mol of Zn reacts with 2 mol of HCl to produce 1 mol of H2

So if 20.0 mol of Zn is added to excess HCl, all the Zn will react to produce:

20.0 mol Zn × 1 mol H2 / 1 mol Zn = 20.0 mol H2

To calculate the mass of H2 produced, we need to use its molar mass, which is 2.016 g/mol:

Mass of H2 = number of moles of H2 × molar mass of H2

Mass of H2 = 20.0 mol × 2.016 g/mol

Mass of H2 = 40.32 g

Therefore, 40.32 grams of hydrogen gas will be produced.

To know more about hydrogen gas refer to-

https://brainly.com/question/11426882

#SPJ11

The partial pressure of ethane and propane in the flask are both 16.42 atm.

The given information tells us that the flask is sealed, which means that no gas can enter or leave the flask. It also tells us that the volume of the flask is 10.0L and the temperature is 400K. Finally, it tells us that there are equimolar amounts of ethane and propane in the flask.

From this information, we can assume that the total pressure inside the flask is the sum of the partial pressures of ethane and propane. This is because the ideal gas law tells us that PV = nRT, where P is pressure, V is volume, n is the number of moles of gas, R is the gas constant, and T is the temperature. Since the number of moles of each gas is the same, we can assume that their partial pressures are equal.

To find the partial pressures, we need to use the ideal gas law again. However, we need to know the total number of moles of gas in the flask. We can find this by using the fact that the amounts of ethane and propane are equimolar. Since the molar mass of ethane is 30 g/mol and the molar mass of propane is 44 g/mol, we know that the total mass of gas in the flask is 74 g. Dividing this by the sum of the molar masses (30+44=74 g/mol), we get the total number of moles, which is 1 mol.

Now we can use the ideal gas law to find the partial pressures. We'll use R = 0.08206 L·atm/(mol·K) as the gas constant. For ethane, we have:

PV = nRT
P_ethane * 10.0L = 0.5 mol * 0.08206 L·atm/(mol·K) * 400K
P_ethane = (0.5 mol * 0.08206 L·atm/(mol·K) * 400K) / 10.0L
P_ethane = 16.42 atm

For propane, we get the same result:

PV = nRT
P_propane * 10.0L = 0.5 mol * 0.08206 L·atm/(mol·K) * 400K
P_propane = (0.5 mol * 0.08206 L·atm/(mol·K) * 400K) / 10.0L
P_propane = 16.42 atm

Therefore, the partial pressure of ethane and propane in the flask are both 16.42 atm.

Know more about Partial Pressure here:

https://brainly.com/question/31214700

#SPJ11

8.32 grams of CaCl2 are required to produce 750 ml of a 0.100 M CaCl2 solution.

The number of moles of solute that can dissolve in 1 L of a solution is known as molarity or molar concentration.

Volume of solution (in litres) / Number of solutes (in moles), or

C = n / V

According to the question,

V = 750 ml and C = 0.100 M

Let's convert millilitres to litres for this.

We know 1 L = 1000 ml

Consequently, 750 ml equals (750/1000) L, or 0.75 L.

So, V = 0.75 L

We know that C = n / V

So, n = C x V

n = 0.100 x 0.75 = 0.075

The solute contains n moles in total.

CaCl2 thus has a mole count of 0.075 moles.

In 750 ml of solution, this demonstrates that there are 0.075 moles of CaCl2.

We must know the molar mass of CaCl2 in order to calculate the mass of CaCl2 in grams.

To do this, we must use the periodic table to determine the atomic masses of each atom.

CaCl2 consists of 1 Ca and 2 Cl atoms.

Atomic mass of Ca is 40.08 g and that of Cl is 35.45, so 2 x 35.45 = 70.90 g.

We obtain the mass of CaCl2 in grams by averaging these measurements.

Hence, mass of CaCl2 = 40.08 + 70.90 = 110.98 g

Thus, 110.98 g equals 1 mole of CaCl2.

Therefore, 0.075 moles of CaCl2 will weigh 8.3235 g, which is rounded to 8.32 g, or 0.075 x 110.98 g.

To know about volume

https://brainly.com/question/14710169

#SPJ4

The complete question is

How many grams of calcium chloride will be needed to make 750 mL of a 0.100 M CaCl2 solution?

By observing whether a white precipitate forms or not, you can determine whether the unknown solution is strontium nitrate or magnesium nitrate.

When the unknown solution is mixed with potassium carbonate, one of two things can happen, depending on whether the unknown solution is strontium nitrate or magnesium nitrate.

If the unknown solution is strontium nitrate, then when mixed with potassium carbonate, a white precipitate of strontium carbonate will be formed. The balanced chemical equation for this reaction is:

Sr(NO3)2 + K2CO3 -> SrCO3 + 2KNO3

If the unknown solution is magnesium nitrate, then when mixed with potassium carbonate, no visible reaction will occur. Magnesium carbonate is insoluble in water and does not precipitate out. The balanced chemical equation for this reaction is:

Mg(NO3)2 + K2CO3 -> no visible reaction

Learn more about potassium carbonate here: https://brainly.com/question/29595625

#SPJ1

Open clusters:

Globular clusters:

Clusters are collections of stars that are gravitationally connected to one another and close to one another in astronomy. Open clusters and globular clusters are the two basic categories into which they can be separated.

While globular clusters are collections of much older stars that are tightly bound together into a spherical shape, open clusters are collections of much younger stars that are relatively loosely bound together.

Find out more on open clusters here: https://brainly.com/question/15222665

#SPJ1

Lead (Pb) is able to react with different elements because it has a relatively low ionization energy, which means that it requires less energy to remove an electron from a lead atom compared to other elements.

Low ionization energy makes it more likely for lead to form compounds with other elements by giving up electrons or sharing them in covalent bonds. Additionally, lead has a relatively high atomic mass, which makes it more likely to form ionic compounds with lighter elements that have lower atomic masses.

The ability of lead to react with different elements also depends on the specific conditions under which the reaction occurs, such as temperature, pressure, and the presence of other reactants or catalysts.

Find out more on lead here: https://brainly.com/question/18110420

#SPJ1

The volume of the gas at 333.0°C is 24.5 L. To solve this problem, we can use the combined gas law, which relates the pressure, volume, and temperature of a gas.

The combined gas law is expressed as:

(P₁V₁)/T₁ = (P₂V₂)/T₂

where P₁, V₁, and T₁ are the initial pressure, volume, and temperature of the gas, and P₂, V₂, and T₂ are the final pressure, volume, and temperature of the gas.

In this case, we know that the initial volume V₁ is 12.0 L and the initial temperature T₁ is 25°C. We want to find the final volume V₂ when the temperature is 333.0°C. We also know that the pressure remains constant.

To use the combined gas law, we need to convert the temperatures to the absolute scale (Kelvin) by adding 273.15 to each temperature. So, T₁ = 298.15 K and T₂ = 606.15 K.

Plugging in the values into the equation, we get:

(P₁V₁)/T₁ = (P₂V₂)/T₂

(P₁ x 12.0)/298.15 = (P₂ x V₂)/606.15

Since the pressure is constant, we can simplify the equation to:

V₂ = (P₁ x V₁ x T₂)/(T₁ x P₂)

Substituting the values, we get:

V₂ = (1 x 12.0 x 606.15)/(298.15 x 1)

V₂ = 24.5 L

Therefore, the volume of the gas at 333.0°C is 24.5 L.

To know more about combined gas law, visit:

https://brainly.com/question/30458409

#SPJ1

The pressure of the gas is 76.8 atm.

The pressure of the gas can be calculated using the ideal gas law formula:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.

First, we need to calculate the number of moles of sulfur:

molar mass of sulfur = 32 g/mol

number of moles = mass/molar mass

= 640 g/32 g/mol

= 20 mol

Next, we need to convert the volume from milliliters to liters and the temperature from Celsius to Kelvin:

V = 540 ml = 0.54 L

T = 47°C + 273.15 = 320.15 K

Finally, we can plug in the values and solve for pressure

P = nRT/V

= 20 mol x 0.08206 L atm mol⁻¹ K⁻¹ x 320.15 K / 0.54 L

= 76.8 atm

To know more about ideal gas law, refer here:

https://brainly.com/question/28257995#

#SPJ11