How many moles are in 3 x 10^23 atoms of gold

Answers

Answer 1

Answer:

0.50 moles

Explanation:

To find the number of moles in a substance given it's number of entities we use the formula

[tex]n = \frac{N}{L} \\[/tex]

where n is the number of moles

N is the number of entities

L is the Avogadro's constant which is

6.02 × 10²³ entities

We have

[tex]n = \frac{3 \times {10}^{23} }{6.02 \times {10}^{23} } = \frac{3}{6.02} \\ = 0.49833...[/tex]

We have the final answer as

0.50 moles

Hope this helps you


Related Questions

PLEASE HELP ASAP!!!!

Answers

A law summarizes a set of observations about an experiment.

What exactly does the word law mean?

Chemical law: Most of the properties and the atomic structure of the elements vary periodically when the elements are arranged in the order of their atomic numbers.

A sound explanation for observations is referred to as a theory. A summary of the relationship between variables constitutes a scientific law. A controlled method of testing a hypothesis is through an experiment.

The fundamental chemistry laws in chemistry are considered to be the following three: the mass conservation principle. the principle of proportional equality. A multiple proportions law.

To know more about chemical law visit:

https://brainly.com/question/29640690

#SPJ1

Which type of plate boundary is represented at point A?

Answers

Answer:

You haven't put an image so that I can determine your answer

Explanation:

Answer:

Point A represents a location on a tectonic plate boundary. Plates X and Y represent major tectonic plates. The island of Crete; the Anatolian Plate, which is a minor tectonic plate; and the Hellenic Trench have been labeled. Arrows indicate the relative directions of plate motion.

Explanation:

Which of the following individuals would be most likely to display conforming behavior?Immersive Reader
(1 Point)

A.a carpenter who has been widely praised for his work

B.the school chess champion

C.a teenage girl who thinks she is unattractive

D.a successful business executive

Answers

C or a is the answer

is there a pattern to the location of planets based on their density ?

Answers

Yes!

Explanation:

If density is greater, the object sinks. Saturn is mainly composed of the lightest two gases known, hydrogen and helium. It is the only planet in our solar system whose density is less than water.

What is the measurement of expired CO2 that typically provides a numeric display of the partial pressure of CO2 in torr or mmHg

Answers

The measurement of expired CO₂ that typically provides a numeric display of the partial pressure of CO₂ in torr or mmHg is the capnometry.

The capnometry measurement of the  CO₂ , carbon dioxide is the measurement in the expired air and it provides the clinician with the noninvasive measurement of systemic metabolism and the ventilation. it is used to determine the correlation in between the tidal CO₂  and the partial CO₂  in the non intubated breathless patents.

Thus, the measurement if the expired CO₂  that shows the partial pressure of the CO₂  is the capnometry.

To learn more about pressure here

https://brainly.com/question/9226237

#SPJ4

Which solution is the least concentrated? 4 moles of solute dissolved in 6 liters of solution? 4 moles of solute dissolved in 6 liters of solution? 1 mole of solute dissolved in 1 liter of solution? 1 mole of solute dissolved in 1 liter of solution? 8 moles of solute dissolved in 4 liters of solution? 8 moles of solute dissolved in 4 liters of solution? 3 moles of solute dissolved in 2 liters of solution?

Answers

Answer:

The solution that is least concentrated is the one containing 4 moles of solute dissolved in 6 liters of solution .

Explanation:

Concentration is defined as the amount of a substance in a given apquantitybof solvent or solution. The unit of concentration is usually given as mol/litre

Mathematically, concentration = Number of moles of solute/ volume of solution in litres.

To determine the solution that is least concentrated from the given solutions, their concentrations in mol/L is calculated.

Concentration of solution containing 4 moles of solute dissolved in 6 liters of solution = 4 mol/6 litres = 0.67 mol/L

Concentration of solution containing 1 mole of solute dissolved in 1 litre of solution = 1 mol/ 1 litre = 1 mol/L

Concentration of solution containing 1 mole of solute dissolved in 1 liter of solution = 1 mol/ 1 litre = 1 mol/L

Concentration of solution containing 8 moles of solute dissolved in 4 liters of solution = 8 moles / 4 litres = 2 mol/L

Concentration of solution containing 8 moles of solute dissolved in 4 liters of solution = 8 moles/ 4 litres = 2 mol/L

Concentration of solution containing 3 moles of solute dissolved in 2 liters of solution = 3 moles / 2 litres = 1.5 mol/L

Therefore, the solution that is least concentrated is the one containing 4 moles of solute dissolved in 6 liters of solution .

What information does the percent composition of an atom in
a molecule give?
The relative number of atoms one element
contributes to a molecule
B. The total number of atoms of that element in a molecule
• C. The total mass that element contributes to a molecule a
O
D. The relative amount of mass an atom contributes to
a molecule

Answers

Answer:

I think Option no D is the suitable answer

A reaction produces 4.93 L of oxygen, but was supposed to produce 1 mol of oxygen. What is the percent yield

Answers

When only 1 mol of oxygen was intended to be produced, a process instead yields 4.93 L of oxygen. The percent yield of the reaction is 493%.

Percent yield is a measure of how much of the desired product is produced in a chemical reaction. It is calculated by comparing the actual yield of a product to the theoretical yield, which is the amount of product that would be produced if the reaction were 100% efficient.

To calculate the percent yield, you can use the formula:

= percent yield

= (actual yield / theoretical yield) x 100%

The theoretical yield of a reaction is calculated by multiplying the number of moles of reactant used by the stoichiometry of the reaction. In this case, the reaction is supposed to produce 1 mol of oxygen, which is the theoretical yield. To calculate the actual yield, we can use the Ideal gas law PV = nRT, where P is the pressure, V is the volume, n is the number of mol. Since we know that V = 4.93 L, we can use this information to find n:

= n

= (PV) / RT

The actual yield is 4.93 L of O2 or 4.93 L of any gas at STP (Standard Temperature and Pressure) is equivalent to 4.93 moles of O2.

Then we can use this information to calculate the percent yield:

= percent yield

= (actual yield / theoretical yield) x 100%

= (4.93 moles O2 / 1 mole O2) x 100%

= 493%

So, the percent yield of the reaction is 493%.

It's important to note that a percent yield of greater than 100% is usually an indication of an error in the measurement or calculation of the actual yield, or it could be an indication that the theoretical yield is incorrect.

To know more about oxygen please refer: https://brainly.com/question/1506082

#SPJ4

How many hydrogen atoms are in 1 mg of aspartame?

Answers

Change mg—-> moles then moles—-> no.molecules by these rules 1)MOLES=MASS/MOLAR MASS 2)NO.MOLECULES=MOLESXAVOGADROS NUMBER

If Si bonds with O, what type of bond is it? *

Answers

Answer:

covalent bond

the answer is short I don6 know why brainly is telling me it needs to be 20 characters long

Molecular or Covalent.

help help help help help help help help help

Answers

Answer:

what do u need help with sir

The solubility of glucose (a type of sugar) is 133 g/1000mL. Would you expect a mixture made of 60 g of glucose in 500 mL of water to be saturated? Why or why not?

Answers

Answer:

yes

Explanation:

60/500 is less than 133/1000 meaning that the glucose will be able to disolve without a salute

Almost all of the oxygen (O2) one consumes in breathing is converted to:
a. acetyl-CoA.
b. carbon dioxide (CO2).
c. carbon monoxide and then to carbon dioxide.
d. none of the above.
e. water.

Answers

Almost all of the oxygen (O2) one consumes in breathing is converted to: b. carbon dioxide (CO2).

When we breathe in oxygen, it is used in cellular respiration, which is the process by which our body converts glucose and oxygen into energy in the form of ATP. In the process, the oxygen is combined with the hydrogen atoms from glucose to form water, and the carbon atoms from glucose are converted to carbon dioxide (CO2) as a waste product. Therefore, almost all of the oxygen that one consumes in breathing is converted to carbon dioxide (CO2).Breathing is the process by which an organism takes in oxygen and expels carbon dioxide. In humans and other mammals, this process is accomplished through the respiratory system, which includes the nose, trachea, bronchi, and lungs. When we inhale, air is drawn into the lungs through the nose or mouth, passing through the trachea and bronchi before reaching the alveoli, which are small air sacs in the lungs where gas exchange occurs.

To learn more about oxygen (O2) here:

https://brainly.com/question/9714175

#SPJ4

What type of circuit does this figure represent?

parallel circuit


series circuit


short circuit


open circuit

Two lengths of wire connect opposite sides of a battery to contacts on opposite sides of lightbulb one, then lightbulb two, and then lightbulb three.

HELP NOWWWWWWW I WILL MARK BRANILEST!!

Answers

Answer:you answer would be B

Explanation:and I'm bc I took the rest lol

Parellel Curcuit Explanation: I took the Test On k12

what is the formula for dinitrogen pentoxide?
A)NO5
B)N5O2
C)N2O5
D)N2O7

Answers

Answer:

C) N2O5

Explanation:

world production of ammonia is now about 30 times greater than it was in 1950 suggest why the demand for ammonia is increased

Answers

AMMONIA

There are a few reasons why the demand for ammonia has increased over time:

Population growth: The world's population has grown significantly over the past 70 years, and as the population has grown, so has the demand for food. Ammonia is a key ingredient in the production of fertilizers, which are used to help grow crops and increase food production. As the population has increased, so has the demand for fertilizers, which has contributed to the increase in the production of ammonia.

Industrialization: As more countries have industrialized and developed, there has been an increased demand for ammonia to use as a feedstock in the production of chemicals, plastics, and other industrial products.

Energy production: Ammonia can be used as a source of renewable energy, and there has been an increased demand for clean energy sources in recent years. This has led to an increase in the production of ammonia for use in energy production.

Environmental concerns: Ammonia can be used to reduce greenhouse gas emissions, and there has been an increased focus on finding ways to reduce environmental impact. This has led to an increase in the production of ammonia for use in environmental applications.

Hope This Helps You!

Please help! Worth 20 points and I’ll give brainliest.

Answers

-138.7 kJ/mol is the answer, ive done this question before

Determine the freezing point and boiling point of a solution that has 68.4 g of sucrose
(C12H22011) dissolved in 100.g of water?

Answers

Answer:

Freezing T° of solution = - 3.72°C

Boiling T° of solution =  101.02°C

Explanation:

To solve this we apply colligative properties. Firstly, freezing point depression:

ΔT = Kf . m . i

ΔT = Freezing T° of pure solvent - Freezing T° of solution

Kf = Cryoscopic constant, for water is 1.86 °C/m

m = molality (moles of solute in 1kg of solvent)

i = Ions dissolved in solution

Our solute is sucrose, an organic compound so no ions are defined. i = 1.

Let's determine the moles: 68.4 g . 1mol/ 342g = 0.2 moles

molality = 0.2 mol / 0.1kg of water = 2 m

We replace data: ΔT = 1.86°C/m . 2m . 1

Freezing T° of solution = - 3.72°C

Now, we apply elevation of boiling point: ΔT = Kb . m . i

ΔT = Boiling T° of solution - Boiling T° of  pure solvent

Kf = Ebulloscopic constant, for water is 0.512 °C/m

We replace:

Boiling T° of solution - Boiling T° of pure solvent = 0.512 °C/m . 2 . 1

Boiling T° of solution = 0.512 °C/m . 2 . 1 + 100°C → 101.02°C

What is the percent by volume of isopropyl alcohol in a solution made by mixing 120 mL of the alcohol with enough water to make 350 mL of solution?

Answers

Answer: The percent by volume of isopropyl alcohol in a solution made by mixing 120 mL of the alcohol with enough water to make 350 mL of solution is 25.5%.

Explanation:

Given: Volume of solute = 120 mL

Volume of solvent = 350 mL

Now, total volume of the solution is as follows.

[tex]V_{total} = V_{solute} + V_{solvent}\\= 120 mL + 350 mL\\= 470 mL[/tex]

Let us assume that 100 mL of solution is taken and the amount of isopropyl alcohol present in it is as follows.

[tex]\frac{V_{solute}}{V_{total}} \times 100 mL\\\frac{120 mL}{470} \times 100 mL\\= 25.53 mL[/tex]

Hence, there is 25.53 mL isopropyl alcohol is present in 100 mL of solution. Therefore, %v/v is calculated as follows.

[tex]Percent (v/v) = \frac{25.53 mL}{100 mL}\\= 25.5%[/tex]

Thus, we can conclude that the percent by volume of isopropyl alcohol in a solution made by mixing 120 mL of the alcohol with enough water to make 350 mL of solution is 25.5%.

How many protons does one oxygen atom contain

Answers

Answer:

8

Explanation:

Its official chemical symbol is O, and its atomic number is 8, which means that an oxygen atom has eight protons in its nucleus

The answer is 8 to you question

Which of the following alkenes cannot be converted into an alkyne by reacting it with bromine followed by an excess of sodium amide and then with water? X X II III DIVE, III and IV II &IX

Answers

Among the following alkenes (D) IV cannot be converted into an alkyne by reacting it with bromine followed by an excess of sodium amide and then with water.

An alkene must first be brominated by an addition reaction that produces a vicinal dibromide in order to transform it into an alkyne. All alkenes that have at least one double bond double substituted render them unsuitable for this method due to the requirement of this vicinal dibromide. This is so that the alkane can undergo a double elimination and produce an alkene, which needs at least one C-H and C-X bond. This hinders the conversion of molecule IV into an alkyne.

The dibromo alkane would change into the provided alkene by losing one unit of HBr if it were to react with bromine. However, the second beta-elimination cannot take place since there isn't hydrogen that is physically linked to the alkene carbon. So (D) IV is the right option.

You can also learn about dibromide from the following question:

https://brainly.com/question/11530316

#SPJ4

A student dissolved 0.178 grams of a solid monoprotic acid in water and then titrated it. They then performed the same calculation as you just did in question 2 to find the moles and they found that 0.00685 moles were neutralized. What is the molar mass of the unknown acid that was dissolved? (Hint: What are the units for molar mass?)

Answers

Mole measure the number of elementary entities of a given substance that are present in a given sample. Therefore, 25.98g/mol is the molar mass of the unknown acid that was dissolved.

What is mole?

The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity or amount of substance. We know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number.

Mathematically,

mole =given mass ÷ molar mass

Molar mass of  unknown acid= ?

mass of  unknown acid= 0.178 grams

moles of  unknown acid= 0.00685 moles

Substituting the values in above formula we get

0.00685  = 0.178  ÷ molar mass

molar mass=25.98g/mol

Therefore, 25.98g/mol is the molar mass of the unknown acid that was dissolved.

To know more about mole, here:

https://brainly.com/question/15209553

#SPJ1

Balance the following double displacement reaction and determine the coefficients of all of the reactants and products.

___ BaCl2 +___ Na2CO3 --> ___ BaCO3 + ___ NaCl

Answers

This double displacement reaction and the coefficients of all the reactants and products in this balanced chemical reaction is Bacl₂ + Na₂CO₃ = BaCO₃ + 2Nacl.

What is a double displacement reaction?

A double displacement reaction is a particular type of reaction in which two reactants swap ions to produce two new molecules. Water-soluble ionic compounds interact with one another in a number of double displacement processes.

What is the meaning of coefficients?

Coefficients are the numbers or expressions put in front of a chemical symbol or formula to balance chemical equations. It provides information on the number of atoms or molecules of the drug or chemical that are a part of the reaction.

What is a chemical reaction?

When two or more compounds come into touch with one another and create a new substance, the process is known as a chemical reaction (s). Reactants or reagents are the name(s) for the substance(s) or substances that are initially incorporated into the chemical process. Chemical reactions typically involve a chemical change and produce one or more products, which typically differ from the reactants in some ways.

To know more about double displacement reaction, check out:

https://brainly.com/question/23918356

#SPJ1

Why do we use an excess of aldehyde in the aldol-dehydration reaction? O to form an enolate anion O to insure that the double aldol-dehydration takes place O to react with the free radicals
O to prevent air-oxidation

Answers

Option B, Using an excess of aldehyde in the aldol-dehydration reaction is done primarily to ensure complete conversion of the reactants to the desired product.

An excess of aldehyde is used to ensure that there is a sufficient concentration of the aldehyde present in order to form the enolate anion, which is the reactive intermediate in the aldol-dehydration reaction. To achieve high yield: Using an excess of aldehyde allows for the formation of multiple enolate anions, which increases the chances of a double aldol-dehydration reaction taking place, resulting in the formation of the desired product. Using an excess of aldehyde helps aldol-dehydration to prevent this by reducing the exposure of the aldehyde to air.

Learn more about aldol-dehydration here:

https://brainly.com/question/23798009

#SPJ4

A 13.1-g sample of ice at −17.9°C is mixed with 103.5 g of water at 73.0°C. Calculate the final temperature of the mixture assuming no heat loss to the surroundings. The heat capacities of H2O(s) and H2O(l) are 2.03 and 4.18 J/g·°C, respectively, and the enthalpy of fusion for ice is 6.02 kJ/mol.

Answers

The final temperature of the mixture when no heat loss to the surroundings is equal to 69.57 °C

What is the specific heat capacity?

The specific heat capacity can be defined as the amount of heat required to increase the temperature in 1 unit of substance by 1° Celcius.

The specific heat capacity can be expressed in the form of the mentioned formula below:

Q = mSΔT

The specific heat capacity of the water, S = 4.184 J/g°C

The heat lost by water = heat gained by the ice

Heat lost by water = heat gained by the ice + heat increased by the water

m₁S₁ (T₂ - T₁) = m₂L + m₂S₂ (T₂ - T₁)

103.5 × 4.18 × (73- T) = 13.1  × (2.03) + 5 × 4.18 × (T-0)

31582 - 432.63 T = 26.59 + 20.9 T

453.53 T = 31555

T = 69.57 °C

Learn more about specific heat capacity, here:

brainly.com/question/28302909

#SPJ1

Give a Question/Problem for Hot and Cold Compress Pillow.

Help mee plsss

THANK you!!!

Answers

Answer:

One problem that people may encounter when using a hot and cold compress pillow is that the pillow may not stay hot or cold for a long enough period of time. This can be frustrating for people who are using the pillow to alleviate muscle pain or reduce inflammation, as they may need to continually reheat or refreeze the pillow in order to maintain its therapeutic benefits. To solve this problem, people may need to find a pillow that is better at retaining heat or cold, or they may need to use additional heating or cooling elements (such as hot water bottles or ice packs) in conjunction with the pillow.

Explanation:

1.___The enthalpy of the reactants of the reaction is about:
2.___The enthalpy of the products of the reaction is about:
3.___The activation energy of the reaction is about:
4.___The heat of reaction (ΔH) of the reaction is about:
5.___The forward reaction is:
6.___Addition of a catalyst would lower the:
7.___The enthalpy of the reactants is _______than the enthalpy of the products

a. greater
b. kinetic energy
c. 200 kJ
d. 120 kJ
e. exothermic
f. endothermic.
g. 80 kJ
h. 160 kJ
I. enthalpy
j. activation energy
k. less

Answers

Answer:

1.c 2.j 3.h 4.a 5.d 6. b 7.k 8.e

Explanation:

True or False: The bowling ball pendulum didn’t hit Bill Nye in the face because the amount of kinetic energy can never be more than the amount of potential energy, some of the energy is transferred to heat.

Answers

The bowling ball pendulum didn’t hit Bill Nye in the face because the amount of kinetic energy can never be more than the amount of potential energy, some of the energy is transferred to heat. This statement is true.

Why didn't the bowling ball pendulum hit Bill Nye in the face?

The bowling ball pendulum did not hit Bill Nye in the face because potential energy will always be greater than kinetic energy. When a force (a push or a pull) acts on something over a long distance, this occurs.

For instance, if the object is positioned at a higher height, its kinetic energy will be higher. Potential energy is not transferable and varies with object mass, height, and distance.

Thus, The bowling ball pendulum didn’t hit Bill Nye in the face because the amount of kinetic energy can never be more than the amount of potential energy, some of the energy is transferred to heat.

To learn more about the bowling ball pendulum, follow the link;

https://brainly.com/question/21052088

#SPJ1

7. Convert 25.0 grams of KMnO4 to moles.

K-39.098
Mn- 54.938
0-15.999

Answer in THREE Sig Figs with Units

Answers

Hi your answer is

25.0 grams x 1 mole/158.04 = 0.158 moles KMnO4

The picture below shows an open field with wildflowers.


Which of the following is NOT a way that this environment supports populations of bees?

Answers

Answer:

no picture you need add it

Other Questions
What do you think you can all do right now that will lead to your voicesactually being heard as members of your own community and why? A horse pulls a wagon with a force of 1450 Newtons. How many meters sis the wagon travel if the horse exerted 798 watts of power over 3.5 minutes? (convert min. to seconds). What are the intercepts of y 2x + 6? PLEASE HELP DUE IN 1 HOUR, AND PLEASE DON'T PUT THOSE LINKS OR ELSE I WILL REPORT YOU. which number is the greatest -5/3 -5/2 -7/3 Find the value of X. Round your answer to the nearest tenth. During class, you jump up and run over to get a ruler because you love making graphs. This is an example of acceleration.True or False? A company would consider all of the following in computing the IRR of an investment, exceptA) predicted cash inflows over the life of the project.B) the cost of the project.C) depreciation expense on the assets of the project.D) present value factors. Hi I really need help on this question please In general, soundtravels faster through Use the terms below to describe the information given in the punnet square.A. GenotypeB. PhenotypeD. OffspringC. Allele Which of the following is not a fiduciary duty an agent owes to his or her principal?A. LoyaltyB. ConfidentialityC. AccountabilityD. Blind obedience help me with this math problemno h and j According to Bentham, societys interest is the sum of the interests of all the members of the society. True False the most common court in illinois where most cases start in the how would you read absolute value -5 What does it take to improve your consistency in your work ? How to write an email to be ent to you favorite book author expreing you view on the newly book publihed by him in not more than 120 word Whats the maximum number of conditions that can be set for a bank rule? a.Cattle trails ran east-west, and most railroads followed their routes because the railroads needed to bypass major towns.b.Cattle trails ran north-south, and most railroads followed their routes to bring much-needed supplies to Americas expanding southwest.c.Cattle trails ran north-south, but most railroads ran east-west to enable people and supplies to move quickly across the plains and mountains.d.Cattle trails ran north-south, but most railroads ran east-west because this is how the major rivers in Americas West flowed.Please select the best answer from the choices providedABCD