How many moles are in 3.555 g of c2h2?

Answer: D- ecotourism helps pay for conservation efforts

Explanation:

says help and the others exploit and harm

Answer: C

Explanation:

I think the answers correct because, A says that the food chain will stay the same, but thats not true because, the frog ate most of the insects. And B says the population will decrease, but that doesn't make sense because a animal that eats grasshoppers would no longer be there. And C says that the population will increase and i think that correct because, one animal that does eat the grasshopper wouldn't be there so the grasshoppers will increase in population. And D says the population of snacks will increase but that was one of the foods the snacks ate so they would decrease because they lost one species to eat off of.

Hope This Helps!

Answer:

True

Explanation:

both are chemical, got it right on my test

Answer:

b. insoluble in water

Explanation:

triacylglycerols are insoluble in water

The VSEPR drawing for the compounds in the question are shown in the images attached.

We have to know that according to the valence shell electron pair repulsion theory, the structure of the molecule can be found by looking at the number of electron pairs that surround the central atom in the molecule.

Now the structure of the compounds as we can see in the images that ahve been attached are based on the Vlence Shell electron pair repulsion drawing for each of the compounds that we have mentioned in the question.

We can see that the structure of the compound must have a central atom and then the other atoms in the molecule are arranged around the central atom of the molecule.

The molecule would have a definite shape that is based on the number of electron shells in the molecule.

Learn more about molecule:https://brainly.com/question/19922822

#SPJ1

Answer:

Difference in the potential energy of the reactants and products

Explanation:

The products have a lower potential energy than the reactants, and the sign of ΔH is negative. In an endothermic reaction, energy is absorbed. The products have a higher potential energy than the reactants, and the sign of ΔH is positive.

The factor on which the energy absorbed during an endothermic reaction depends upon is difference in the potential energy of the reactants and products.

All the reactions that absorb energy from the environment, this energy is used as the activation energy required to carry out the reaction.

This reaction feels cold

In Endothermic Reaction the potential energy of the products that are being made is higher than the potential energy of the reactants.

The difference of the energy is taken from the environment or surrounding.

The difference is due to the bond strength of the reactants is more stronger than the bond strength in the products.

Strong bonds have lower potential energy than weak bonds.

Therefore the factor on which the energy absorbed during an endothermic reaction depends upon is difference in the potential energy of the reactants and products .

To know more about Endothermic Reaction

https://brainly.com/question/23184814

#SPJ2

Answer:

b

Explanation:

because it is the balanced one

Answer: The volume of oxygen at STP is needed for complete given combustion is 1121.28 L.

Explanation:

The given reaction equation is as follows.

[tex]2C_{2}H_{18}(l) + 25O_{2}(g) \rightarrow 16CO_{2}(g) + 18H_{2}O(g)[/tex]

This shows that 2 moles of gasoline requires 25 moles of . Hence, moles of oxygen required to react with 4 moles of gasoline are calculated as follows.

[tex]\frac{25 mol O_{2}}{2 mol C_{2}H_{18}} \times 4 mol C_{2}H_{18}\\= 50 mol O_{2}[/tex]

At STP, the pressure is 1 atm and temperature is 273.15 K. Therefore, using ideal gas equation the volume of oxygen is calculated.

PV = nRT

where,

P = pressure

V = volume

n = no. of moles

R = gas constant = 0.0821 L atm/mol K

T = temperature

Substitute the values into above formula as follows.

[tex]PV = nRT\\1 atm \times V = 50 mol \times 0.0821 L atm/mol K \times 273.15 K\\V = 1121.28 L[/tex]

Thus, we can conclude that volume of oxygen at STP is needed for complete given combustion is 1121.28 L.

Answer: A

Explanation: I just took the quiz.

Shade-grown coffee trees produce more coffee beans per plant.

What are shade-grown coffee beans?

Shade-grown coffee is coffee grown underneath a canopy of taller trees that provide shade from the sun. Traditionally, coffee has been grown in this manner – underneath a natural forest canopy – and when done so, there are many benefits.

Majority of coffee varieties are not able to tolerate direct sunlight. They grow better under the canopy of sun-filtering shade trees. The canopy of shady trees protects the coffee from the direct sun. Further, shade-grown coffee does not require chemical fertilizers and pesticides. In the shade, the coffee beans mature more slowly. Thus, shade-grown coffee produces more beans. With slow growth, the natural sugars and flavour of the coffee get increased or enhanced. This coffee provides biodiversity and a home for birds.

Hence, option D is correct.

Learn more about shade-grown coffee beans here:

https://brainly.com/question/12504720

#SPJ2

Answer:

0.178 M

Explanation:

First we determine the molar mass of NaOH, using the given molar masses of the elements:

Then we convert 5.000 grams of NaOH into moles, using its molar mass:

Now we convert 700.0 mL into L:

Finally we calculate the molarity of the solution:

Answer:

la respuesta es la letra: a

The hydroxide of the solution can give the pOH of the solution used to determine the pH of the solution. The solution has a pH of 7.7 and is basic. Thus, option a is correct.

The hydrogen potential of the solution is given by the concentration of the hydrogen or the hydroxide concentration dissolved in the solution.

The pH or the pOH of the solution can be used to determine the acidic and basic nature of the solution based on the range in which it lies.

If the pH of the solution lies below 7 then they are said to be acidic, whereas above 7 are alkaline in nature.

Given,

[OH⁻]  =5.6 x 10⁻⁷ M

First, pOH is calculated as,

pOH = -log [OH⁻]

pOH = - log (5.6 x 10⁻⁷ M)

pOH = 6.252

Now, pH from pOH is calculated as:

pH = 14 - pOH

pH = 14 - 6.252

pH = 7.748

Therefore, option a. the pH of the solution is 7.7 and is basic.

Learn more about pH here:

https://brainly.com/question/12920721

#SPJ5

Answer:

a

Explanation:

Answer:

X ray and infrared are two types of electromagnetic waves that are used in medical imaging

Explanation:

Two electromagnetic waves that are used in medical imaging are  

a) X ray – Xray are electromagnetic waves that are used in bone related imaging as the skin allows the X ray to pass through it while the bones block this wave and hence produce image for inspection

b) Infrared waves are used in thermal imaging to determine the which part of body is infected or injured based on the logic that injured parts emit more infrared as compared to other normal body parts.  

Answer:

X ray and infrared are two types of electromagnetic waves that are used in medical imaging

Explanation:

Two electromagnetic waves that are used in medical imaging are  

a) X ray – Xray are electromagnetic waves that are used in bone related imaging as the skin allows the X ray to pass through it while the bones block this wave and hence produce image for inspection

b) Infrared waves are used in thermal imaging to determine the which part of body is infected or injured based on the logic that injured parts emit more infrared as compared to other normal body parts.  

Answer:

Just use a text book.. So that you get the concept

The mass of this isotope that is required to give an activity of 205 C is 1.187 mg.

Isotope is defined as two or more different types of atoms with the same atomic number, but different nucleon values at different positions on the periodic table. Isotopes are forms of an element that have the same number of protons and electrons but differing numbers of neutrons.

Let's first translate the 2.70 day half life into seconds to obtain the following half life:

T(1/2) = 233300 sec

By subtracting the half life from ln(2)? = 2.971x10⁻⁶, determine the decay constant.

Now that we have the decay constant, we can solve for the quantity of isotopes required to produce an activity of 290 Ci (which is equal to 1.073x10¹³ decays per second) using the rate of decay equation. Due to the fact that we are discussing the beginning action, t = 0 for this equation.

-1.073x10³ = -A?e^(-? x 0)

Since we are losing isotopes rather than acquiring them, the left side of the equation is negative.

Fill in the blanks: A = 3.611x10¹⁸ isotopes

Find out how much mass is contained in all of these isotopes now.

(3.611x10¹⁸) x(198u) =  7.150x10²⁰ u

To get the final result, convert to mg at this point:

1.187 mg

Thus, the mass of this isotope that is required to give an activity of 205 C is 1.187 mg.

To learn more about isotope, refer to the link below:

https://brainly.com/question/11680817

#SPJ2

Answer:

3 (NH4)2SO4(aq) + 2 Al(NO3)3(aq) → 6 NH4NO3(aq) + Al2(SO4)3(aq)

Explanation:

In solubility rules, all ammonium and nitrates ions are solubles and all sulfates are soluble except the sulfates that are produced with Ca²⁺, Sr²⁺, Ba²⁺, Ag⁺ and Pb²⁺. That means the NH4NO3 and the Al2(SO4)3 produced are both soluble and no precipitate is predicted.

The reaction is:

Answer:

A. C2H4

Ethene

step by step explanation:

Snowy Owl i Think  or weasel

Answer:

Explanation:

In water, silver nitrate (AgNO3) dissolves to generate the ions Ag+ (silver) and NO3- (nitrate). When the substance is dissolved in water, the ions are separated and become solvated, or surrounded by water molecules. Water molecules' oxygen atoms join the metal ion in a coordinate covalent bond that gives the metal ion a pair of electrons. By preventing it from interacting with other ions or molecules in the solution, this aids in stabilising the metal ion. As a result of their hydrogen bonds with the water molecules around them, the nitrate ions are likewise stabilised in solution.

Answer:

this is a animal cell..I hope you received this on time

Answer:

True

Explanation:

It is TRUE that Phenylephrine is a nasal decongestant and is the active ingredient in Sudafed, which contains phenylephrine hydrochloride (PEHCl).

Phenylephrine is considered a prescription formula that is used in the production of Sudafed. Due to its direct-acting sympathomimetic amine property, it is used as a significant ingredient in the formation of Sudafed, a drug usually prescribed for nasal decongestion from regular cold, upper respiratory allergies, hay fever, etc.

Answer:

The water will not interfere with the testing of flammable liquids.

When forensic scientists investigate this fire, the water will not interfere with the testing of flammable liquids. Therefore, option B is correct.

A flammable liquid is one with a flash point at or below the nominal threshold temperatures specified by a variety of national and worldwide standards organizations. This means that it can easily ignite in air at room temperature.

our home probably contains a sizable number of flammable liquids. Rubing alcohol, nail polish remover, hand sanitizer, and wart remover are some items that quickly catch fire in addition to gasoline and lighter fluid.

Gasoline is one of the most hazardous liquids in the home and causes over 8,000 home fires each year. One explanation is the frequent inappropriate storage of items in garages. Store it at room temperature, away from heat sources like your hot water heater or furnace, in a UL-approved container.

Thus, option B is correct.

To learn more about flammable liquid, follow the link;

https://brainly.com/question/4358446

#SPJ2

The mass of 65% and 20% nitric acid that must be mixed to produce 4.5 kg of 30% nitric acid are 1.306 kg and 3.189 kg respectively.

The volume of 4.5 kg of 30% nitric acid is determined using the formula below:

The density of 30% nitric acid is 1.18 g/mL

The mass of the  30% nitric acid is 4.5 kg or 4500 g

Hence, the volume will be:

The volume of 30% nitric acid = 4500 / 1.18

The volume of 30% nitric acid = 3813.56 mL

The volume of 65% and 20% nitric acid required is then determined.

Let the volume of the 65% and 20% nitric acid be x and y respectively;

x + y = 3813.56 ---(1)

amount of acid in 3813.56 ml solution = 30% * 3813.56

amount of acid in 3813.56 ml solution = 1144.07 mL

therefore;

60% * x + 20% * y = 1144.07 mL

0.6x + 0.2y = 1144.07 ----(2)

Solving for x and y in the two equations

From (1), x = 3813.56 - y

Substitute x = 3813.56 - y in (2)

0.6(3813.56 - y) + 0.2y = 1144.07

0.4y = 1144.07

y = 2860.18 mL
x = 3813.56 - 2860.18

x = 953.38 mL

The mass of the acids required is then determined as follows:

The density of 60% nitric acid is 1.37 g/mL

Mass of 60% nitric acid required = 953.38 mL * 1.37 g/mL

Mass of 60% nitric acid required = 1306 g or 1.306 kg

The density of 20% nitric acid is 1.115 g/mL

Mass of 20% nitric acid required = 2860.18 mL * 1.115 g/mL

Mass of 20% nitric acid required = 3189 g or 3.189 kg

Learn more about mass, density, and volume at: https://brainly.com/question/26364788

#SPJ1

Answer: 6.65bullfrogs/km²

Explanation:

The population density of the bullfrogs per square kilometer will be gotten by dividing the number of bullfrogs that live in the marsh by the land area. This will be:

= 452 bullfrogs/68km²

= 6.65bullfrogs/km²

The population density of the bullfrogs per square kilometer is 6.65.

Answer:

the answer is C

Explanation:

Answer: There are 7.4 moles of helium gas present in a 1.85 liter container at the same temperature and pressure.

Explanation:

Given: [tex]V_{1}[/tex] = 2.25 L,     [tex]n_{1}[/tex] = 9.0 mol

[tex]V_{2}[/tex] = 1.85 L,            [tex]n_{2}[/tex] = ?

Formula used to calculate the moles of helium are as follows.

[tex]\frac{V_{1}}{n_{1}} = \frac{V_{2}}{n_{2}}\\[/tex]

Substitute the values into above formula as follows.

[tex]\frac{V_{1}}{n_{1}} = \frac{V_{2}}{n_{2}}\\\frac{2.25 L}{9.0 mol} = \frac{1.85 L}{n_{2}}\\n_{2} = \frac{1.85 L \times 9.0 mol}{2.25 L}\\= 7.4 mol[/tex]

Thus, we can conclude that there are 7.4 moles of helium gas present in a 1.85 liter container at the same temperature and pressure.

Answer:

Explanation:

1) The following balanced chemical equations are for based on the combustions of various fuels. Calculate the heats of combustion for each reaction a. C₂H₂OH + ...