9.6 moles of ammonia are produced when 4.8 moles of nitrogen react with hydrogen.
To answer this question, we will use the balanced chemical equation provided: N2 + 3H2 — 2NH3. From this equation, we can see that for every 1 mole of nitrogen that reacts, 2 moles of ammonia are produced.
So, to determine how many moles of ammonia are produced when 4.8 moles of nitrogen react with hydrogen, we will first need to calculate how many moles of nitrogen are present in the reaction.
Since the coefficient for nitrogen is 1 in the balanced equation, we know that the number of moles of nitrogen is equal to 4.8.
Now we can use the mole ratio from the balanced equation to determine the number of moles of ammonia produced.
For every 1 mole of nitrogen, 2 moles of ammonia are produced, so we can set up a ratio:
1 mole of nitrogen : 2 moles of ammonia
Using the number of moles of nitrogen we calculated earlier (4.8 moles), we can multiply it by the ratio to find the number of moles of ammonia produced:
4.8 moles of nitrogen x 2 moles of ammonia / 1 mole of nitrogen = 9.6 moles of ammonia
Therefore, 9.6 moles of ammonia are produced when 4.8 moles of nitrogen react with hydrogen.
To know more about ammonia, visit:
https://brainly.com/question/31525313#
#SPJ11
A 983. 6 g sample of antimony undergoes a temperature change of +31. 51 °C. The specific heat capacity of antimony is 0. 049 cal/(g·°C). How many calories of heat were transferred by the sample?
The calories of heat transferred by the sample were 1526.06.
The amount of heat transferred by the sample can be calculated using the equation
Q = m x c x ΔT
where:
Q = heat transferred (in calories)
m = mass of the sample (in grams)
c = specific heat capacity of antimony (in cal/(g·°C))
ΔT = temperature change of the sample (in °C)
Substituting the values:
Q = 983.6 g x 0.049 cal/(g·°C) x 31.51 °C
Q = 1526.06 calories
So, the heat transferred by the 983.6 g sample of antimony with a temperature change of +31.51 °C is approximately 1526.06 calories. Specific heat capacity is a property of a material that describes the amount of heat required to raise the temperature of one gram of the material by one degree Celsius. This property can be used to calculate the amount of heat transferred during temperature changes.
To learn more about specific heat capacity visit:
https://brainly.com/question/27991746
#SPJ11
What can be concluded if the reaction quotient (Q) for the reaction is 21.3 and the Keg for the reaction is 50.0? [
Ha(g) + L(g) -› 2HI
a.
The reaction is at equilibrium.
b. The reaction is not at equilibrium and it will proceed toward the products.
c. The reaction is not at equilibrium and it will proceed toward the reactants. d.
None of the above can be concluded.
Since Q is less than K, the reaction will proceed towards products to reach equilibrium. So, the correct option is the reaction is not at equilibrium and it will proceed toward the products.
When the rates of forward and reverse reactions are equal, equilibrium is the condition where there is no overall change in the concentrations of reactants and products. When a system is in equilibrium, the concentrations of all reactants and products are constant over time, and the system appears to be in a state of rest. An equilibrium constant [tex](K_e_q)[/tex], which represents the ratio of the concentrations of products to reactants at equilibrium for a reaction, can be used to characterize the state of equilibrium.
Therefore, the correct option is B.
Learn more about equilibrium, here:
https://brainly.com/question/30694482
#SPJ1
Solution A Solution B
Particle Size of Salt large clumps tiny grains
Temperature of Solvent cold water hot water
Level of Agitation slow stirring fast stirring
What conclusion can be drawn from these solutions?
A.
Solution A will take less time to dissolve, because gently stirring will allow it to combine more evenly.
B.
Solution B will take longer to dissolve and might have some undissolved salt remaining at the bottom of the solution due to the high temperature.
C.
Solution B will take less time to dissolve, because hot water will cause some of the salt to evaporate.
D.
Solution A will take longer to dissolve and might have some undissolved salt remaining at the bottom of the solution due to the low temperature
D. Solution A will take longer to dissolve and might have some undissolved salt remaining at the bottom of the solution due to the low temperature.
In Solution A, the salt is in large clumps, the solvent is cold water, and the agitation is slow stirring. These factors contribute to a slower dissolution process. Large clumps have less surface area exposed to the solvent, cold water has less energy to break the ionic bonds between salt ions, and slow stirring provides less agitation to promote dissolution.
Consequently, it will take longer for the salt to dissolve in Solution A, and there might be undissolved salt remaining at the bottom.
to know more about temperature refer here
https://brainly.com/question/11464844#
#SPJ11
Balance equation for 15 g of solid Mg reacts with 15 g of HCl and produce MgCl2 and H2
When 15 g of Mg reacts with 15 g of HCl, 19.6 g of MgCl₂ and 0.208 g mass of H₂ are produced.
The molar mass of Mg is 24.31 g/mol, and the molar mass of HCl is 36.46 g/mol. To determine the number of moles of each substance, we divide the given mass by its molar mass:
moles of Mg = 15 g ÷ 24.31 g/mol = 0.618 mol
moles of HCl = 15 g ÷ 36.46 g/mol = 0.411 mol
Determine the limiting reactant in the reaction by comparing the number of moles of each reactant:
Mg: 0.618 mol
HCl: 0.411 mol × (1 mol Mg ÷ 2 mol HCl) = 0.206 mol
Since HCl is the limiting reactant, it will be completely consumed in the reaction. The amount of MgCl₂ produced can be calculated as:
moles of MgCl₂ = moles of HCl = 0.206 mol
mass of MgCl₂ = moles of MgCl₂ × molar mass of MgCl₂
mass of MgCl₂ = 0.206 mol × 95.21 g/mol = 19.6 g
Similarly, the amount of H₂ produced can be calculated as:
moles of H₂ = moles of HCl × (1 mol H₂ ÷ 2 mol HCl)
moles of H₂ = 0.206 mol × (1 mol H₂ ÷ 2 mol HCl) = 0.103 mol
mass of H₂ = moles of H₂ × molar mass of H₂
mass of H₂ = 0.103 mol × 2.02 g/mol = 0.208 g
To learn more about mass follow the link:
https://brainly.com/question/4577984
#SPJ4
A tractor collides with a car while driving down the road. The car travels at a speed of 25m/s and weighs 1,300 kg. What is the momentum of the car? If the tractor weighs 1,500 kg and traveled at 5 m/s what was the total momentum of the collision?
The momentum of the car is 32,500 kg m/s, and the total momentum of the collision is 40,000 kg m/s.
The momentum of an object is calculated by multiplying its mass by its velocity. In the case of the car, its mass is 1,300 kg, and it travels at a speed of 25 m/s. To find the car's momentum, we can use the formula:
momentum = mass × velocity
Car's momentum = 1,300 kg × 25 m/s = 32,500 kg m/s
Now, let's find the momentum of the tractor. The tractor weighs 1,500 kg and travels at 5 m/s. Using the same formula:
Tractor's momentum = 1,500 kg × 5 m/s = 7,500 kg m/s
To find the total momentum of the collision, we simply add the momentum of the car and the tractor:
Total momentum = Car's momentum + Tractor's momentum
Total momentum = 32,500 kg m/s + 7,500 kg m/s = 40,000 kg m/s
In conclusion, the momentum of the car is 32,500 kg m/s, and the total momentum of the collision is 40,000 kg m/s.
To know more about momentum, visit:
https://brainly.com/question/30677308#
#SPJ11
A liquid hydrocarbon has an empirical formula CCl2 and a boiling point of 121°C, when vaporized the gaseous compound has a density of 4. 93g/L at 785 torr and 150°C. What is the molar mass the compound and what is the molecular weight?
The molecular weight of the hydrocarbon is 165.83 g/mol and its molecular formula is[tex]C2Cl4[/tex].
Since the empirical formula of the hydrocarbon is [tex]CCl2[/tex], we can assume that it contains one carbon atom and two chlorine atoms.
Let's first calculate the molar mass of the empirical formula:
The atomic weight of carbon is 12.01 g/mol
The atomic weight of chlorine is 35.45 g/mol
The empirical formula mass is therefore 12.01 g/mol + 2(35.45 g/mol) = 83.91 g/mol
To find the molecular formula, we need to know the molecular weight of the compound. We can use the ideal gas law to calculate the number of moles of the gas:
PV = nRT
where P is the pressure in atmospheres, V is the volume in liters, n is the number of moles, R is the ideal gas constant (0.0821 L·atm/mol·K), and T is the temperature in Kelvin.
First, we need to convert the pressure from torr to atm:
785 torr = 1.036 atm
We also need to convert the temperature from Celsius to Kelvin:
150°C + 273.15 = 423.15 K
Now we can solve for the number of moles:
n = PV/RT
n = (1.036 atm)(4.93 g/L)/(0.0821 L·atm/mol·K)(423.15 K)
n = 0.208 mol
The molar mass of the compound is the mass divided by the number of moles:
mass = n × molar mass
molar mass = mass / n
molar mass = (0.208 mol) × (4.93 g/L) / (1 L/mol)
molar mass = 1.025 g/mol
Finally, we can find the molecular formula by comparing the molar mass of the empirical formula to the molar mass of the compound:
molecular weight / empirical formula weight = n
where n is an integer. We can calculate n as follows:
n = molecular weight / empirical formula weight
n = 1.025 g/mol / 83.91 g/mol
n = 0.0122
n is close to 1/2, so we can double the empirical formula to get the molecular formula:
[tex]C2Cl4[/tex]
Therefore, the molecular weight of the hydrocarbon is 165.83 g/mol (2 × 83.91 g/mol) and its molecular formula is [tex]C2Cl4[/tex].
To know more about hydrocarbon refer to-
https://brainly.com/question/31643106
#SPJ11
When you measure current, you are measuring the number of:
a. Neutrons that pass a point in one second.
b. Protons that pass a point in one second.
c. Electrons that pass a point in one second.
d. Atoms that pass a point in one second.
When you measure current, you are measuring the number of: c. Electrons that pass a point in one second.
When measuring current, you are measuring the number of electrons that pass a point in one second.
Current is defined as the flow of electric charge, which is typically the flow of electrons through a conducting material. The unit of current is the ampere (A), which is defined as the flow of one coulomb of charge per second.
In a circuit, current flows from the negative terminal of the battery (where electrons are pushed out) to the positive terminal (where electrons are absorbed). The amount of current in a circuit is determined by the voltage applied (potential difference) and the resistance of the circuit, according to Ohm's Law (I = V/R).
Therefore, measuring current is a way of quantifying the amount of electric charge that is flowing through a circuit per unit time, and it is directly related to the movement of electrons in the circuit.
To know more about Ohms law:
https://brainly.com/question/14296509
#SPJ11
Determine the celsius temperature of 1.50 moles of ammonia contained in a 10.0-l vessel under a
pressure of 2.0 atm.
a
-1100
162
-50 c
с
0.0 c
The celsius temperature of 1.50 moles of ammonia contained in a 10.0-l vessel under a pressure of 2.0 atm can be determined using the ideal gas law.
The ideal gas law states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin. To calculate the temperature in Celsius, the Kelvin temperature is first determined by rearranging the equation and solving for T.
Then, the Kelvin temperature is converted to Celsius by subtracting 273.15 from the Kelvin temperature. In this case, the calculation would be T = (2.0 * 10.0) / (1.50 * 0.0821) = 1100.16 K. Subtracting 273.15 from 1100.16 K yields 827.01 °C, which is equal to 827.01 - 273.15 = -50.0 °C.
In conclusion, the celsius temperature of 1.50 moles of ammonia contained in a 10.0-l vessel under a pressure of 2.0 atm is -50.0 °C.
Know more about Ideal gas law here
https://brainly.com/question/28257995#
#SPJ11
If sodium increases in the ecf, water will move from:.
If sodium increases in the extracellular fluid (ECF), water will move from the intracellular fluid (ICF) to the ECF through osmosis.
This is because sodium is an osmotically active particle, meaning that it affects the concentration of particles in a solution.
When the concentration of sodium in the ECF increases, it creates a hypertonic environment compared to the ICF, which is relatively hypotonic.
As a result, water will move from the hypotonic ICF to the hypertonic ECF in order to balance the concentration of particles between the two compartments.
This movement of water can lead to changes in cell volume and function, which is why maintaining proper electrolyte balance is important for normal cellular function.
To know more about extracellular fluid refer to-
https://brainly.com/question/29307524
#SPJ11
How many molecules of acetyl-CoA result from complete catabolism of the following compounds?
In the complete catabolism of glucose, two molecules of acetyl-CoA are produced. In the complete catabolism of fatty acids, the number of acetyl-CoA molecules produced varies depending on the length of the fatty acid chain.
For example, a 16-carbon fatty acid would produce eight molecules of acetyl-CoA. In the complete catabolism of amino acids, the number of acetyl-CoA molecules produced varies depending on the specific amino acid being catabolized.
Overall, the production of acetyl-CoA is an important step in the cellular respiration process, as it enters the Krebs cycle and eventually leads to the production of ATP.
Understanding the different ways in which acetyl-CoA is produced can provide insight into the metabolism of different types of nutrients and the importance of maintaining a balanced diet.
To know more about fatty acid click on below link:
https://brainly.com/question/30712004#
#SPJ11
When oxygen accepts electrons, water is produced as a byproduct.
When oxygen accepts electrons, water is not always produced as a byproduct. It depends on the specific chemical reaction that is occurring.
In some reactions, such as the process of respiration in living organisms, oxygen accepts electrons and combines with hydrogen ions (protons) to form water as a byproduct. This reaction can be written as:
[tex]O2 + 4e- + 4H+ → 2H2O[/tex]
In this reaction, oxygen accepts four electrons and four hydrogen ions to form two molecules of water.
However, in other reactions, oxygen can accept electrons and form other byproducts. For example, in combustion reactions, oxygen reacts with hydrocarbons to form carbon dioxide and water. The specific reaction that occurs depends on the reactants and conditions involved.
To know more about chemical reaction refer to-
https://brainly.com/question/29039149
#SPJ11
Determine whether the stopcock should be completely open, partially open, or completely closed for each activity involved with titration. At the beginning of a titration Choose. Close to the calculated endpoint of a titration Choose. Filling the buret with titrant Choose. Conditioning the buret with titrant Choose
For each activity, you should set the stopcock as follows: completely closed at the beginning of titration, partially open near the endpoint, completely open when filling the buret, and partially open during buret conditioning.
To determine the stopcock position for each activity, we'll go through them one by one:
1. At the beginning of a titration: The stopcock should be completely closed. This ensures that no titrant is released from the buret until you are ready to begin the titration process.
2. Close to the calculated endpoint of a titration: The stopcock should be partially open. As you approach the endpoint, you'll want to slow down the titrant flow to ensure a more accurate and precise reading of the endpoint.
3. Filling the buret with titrant: The stopcock should be completely open. This allows for quick and efficient filling of the buret with the titrant.
4. Conditioning the buret with titrant: The stopcock should be completely open initially to fill the buret, then partially open to release some titrant and wet the inner walls of the buret. This ensures that the buret is properly coated with the titrant for accurate measurements during titration.
In summary, for each activity, you should set the stopcock as follows: completely closed at the beginning of titration, partially open near the endpoint, completely open when filling the buret, and partially open during buret conditioning.
To know more about titration process :
https://brainly.com/question/10025728
#SPJ11
2. What factors determine the rate at which a substance dissolves?
Answer:
Temperature
Agitation
Particle size
Explanation:
If 4 moles of a gas are at a pressure of 105. 6 kpa and a volume of 12 liters, what is the temperature of the gas?
I just need the answer not a link please!
If 4 moles of a gas are at a pressure of 105. 6 kpa and a volume of 12 liters, the temperature of the gas is 399.36 K.
To solve this problem, we can use the ideal gas law: PV = nRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in kelvin. Rearranging the equation, we get T = PV/nR.
Substituting the given values, we have:
T = (105.6 kPa)(12 L) / (4 mol)(8.31 J/(mol*K))
Simplifying, we get:
T = 399.36 K
Therefore, the temperature of the gas is 399.36 K, or 126.21°C.
To know more about the moles refer here :
https://brainly.com/question/31597231#
#SPJ11
Calculate the root mean square velocity for the N2 gas at 11. 8 degree celcous (R=8. 3145 JK-1 mol-1)
The root mean square velocity for N2 gas at 11.8 degrees Celsius is approximately 84.15 m/s.
Here's a step-by-step explanation:
1. Convert the given temperature from Celsius to Kelvin: 11.8 degrees Celsius + 273.15 = 284.95 K.
2. Recall the root mean square velocity (v_rms) formula for a gas:
v_rms = √(3RT/M), where R is the gas constant, T is the temperature in Kelvin, and M is the molar mass of the gas in kg/mol.
3. Identify the molar mass (M) of N2 gas. Nitrogen has an atomic mass of 14.0067, and since it's a diatomic molecule (N2), we have to multiply that by 2: 14.0067 * 2 = 28.0134 g/mol. Convert this to kg/mol: 28.0134 / 1000 = 0.0280134 kg/mol.
4. Substitute the given values into the formula:
v_rms = √(3 * 8.3145 J K^-1 mol^-1 * 284.95 K / 0.0280134 kg/mol).
5. Solve for v_rms:
v_rms = √(3 * 8.3145 * 284.95 / 0.0280134) ≈ √(7082.04098) ≈ 84.15 m/s.
So, the root mean square velocity for N2 gas at 11.8 degrees Celsius is approximately 84.15 m/s.
To know more about velocity, visit:
https://brainly.com/question/17127206#
#SPJ11
A) Why weight of water is converted to true volume. What are the three corrections that are considered?
The weight of water is converted to true volume because the volume of water can be affected by temperature, pressure, and dissolved impurities. The three corrections that are considered are thermal expansion correction, atmospheric pressure correction, and dissolved impurities correction.
The thermal expansion correction takes into account the fact that water expands or contracts with temperature changes. As the temperature of water increases, its volume increases, and vice versa. The correction factor is calculated based on the temperature of the water and the coefficient of thermal expansion of water.
The barometric or atmospheric pressure correction is applied because the pressure of the surrounding air can affect the volume of water. The correction factor is calculated based on the atmospheric pressure and the vapor pressure of water at the given temperature.
The dissolved impurities correction is applied because dissolved substances, such as salts or gases, can also affect the volume of water. The correction factor is calculated based on the concentration of dissolved substances in the water.
To know more about thermal expansion, refer here:
https://brainly.com/question/14092908#
#SPJ11
What is the mass in grams are in 3. 45 x 10E24 atoms of carbon
The mass in grams of 3.45 x 10E24 atoms of carbon is 68.93 g.
To find the mass in grams of 3.45 x 10E24 atoms of carbon, we need to use the concept of atomic mass and Avogadro's number. The atomic mass of carbon is 12.01 g/mol, which means that one mole of carbon contains 6.022 x 10E23 atoms. This is known as Avogadro's number.
So, to find the mass of 3.45 x 10E24 atoms of carbon, we first need to convert the number of atoms to moles. We do this by dividing the given number of atoms by Avogadro's number:
3.45 x 10E24 atoms / 6.022 x 10E23 atoms/mol = 5.74 moles
Next, we can use the molar mass of carbon to find the mass of 5.74 moles of carbon:
5.74 moles x 12.01 g/mol = 68.93 g
Therefore, the mass in grams of 3.45 x 10E24 atoms of carbon is 68.93 g.
To know more about mass in grams refer here: https://brainly.com/question/4220551#
#SPJ11
the rate of the reaction between no2 and co is independent of [co]. does this mean that co is a catalyst for the reaction? choose the answer that best explains the reason for your choice.
The fact that the rate of the reaction between NO₂ and CO is independent of [CO] does not necessarily mean that CO is a catalyst for the reaction.
A catalyst is a substance that increases the rate of a reaction without being consumed in the reaction itself. In this case, if CO were a catalyst, it would be expected that the rate of the reaction would increase with increasing CO concentration. However, the fact that the rate of the reaction is independent of [CO] suggests that CO is not acting as a catalyst.
Instead, this result suggests that the reaction is not dependent on the concentration of CO, and that the reaction is likely to be a second-order reaction with respect to NO₂. This means that the rate of the reaction is determined by the concentrations of both NO₂ and CO, but the rate is not affected by the concentration of CO itself. Therefore, CO is not acting as a catalyst in this reaction.
To know more about the Reaction, here
https://brainly.com/question/13196831
#SPJ4
An iron reacts with oxygen to produce iron (ii) oxide. if you have 23.1 g of iron and 53.22 g of oxygen, what is the maximum amount of product formed in grams?
The maximum amount of iron (II) oxide that can be formed is 176.9 g if 23.1 g of iron reacts with 53.22 g of oxygen to produce iron (ii) oxide.
The balanced chemical equation for the reaction between iron and oxygen to produce iron (II) oxide is:
4Fe + 3O₂ → 2Fe₂O₃
From the equation, we can see that 4 moles of iron react with 3 moles of oxygen to produce 2 moles of iron (II) oxide.
Calculate the number of moles of each reactant using their respective molar masses:
Number of moles of iron = 23.1 g ÷ 55.845 g/mol
= 0.414 moles
Number of moles of oxygen = 53.22 g ÷ 32 g/mol
= 1.663 moles
Since the stoichiometric ratio of iron to oxygen is 4:3, we can see that oxygen is the limiting reactant because there are only 3 moles of oxygen available for every 4 moles of iron required.
Number of moles of Fe₂O₃ = 2 ÷ 3 × 1.663
= 1.108 moles
Mass of Fe₂O₃ = 1.108 moles × 159.69 g/mol
= 176.9 g
To learn more about oxide follow the link:
brainly.com/question/15319480
#SPJ4
Problems with understanding what happens when things burn
Problems with understanding what happens when things burn can be attributed to various factors, such as lack of knowledge about the combustion process, the role of oxygen, and the production of heat and light energy.
When things burn, a chemical reaction called combustion takes place. During this process, a fuel reacts with oxygen, resulting in the release of energy in the form of heat and light. The products of combustion are usually water, carbon dioxide, and sometimes other gases or particles, depending on the fuel and the burning conditions.
One issue in understanding this process is grasping the importance of oxygen. Oxygen is required for combustion to occur, and the presence of more or less oxygen affects the burning process. For example, in a well-ventilated area, the combustion is more efficient, whereas limited oxygen can result in incomplete combustion and the production of harmful byproducts like carbon monoxide.
Another problem in understanding combustion is the role of heat. Heat is both a product of and a catalyst for combustion. As a fuel gets heated, it may reach its ignition temperature, at which point it spontaneously ignites. Heat also contributes to the spread of fire, as it can cause nearby objects to reach their ignition temperature.
The production of light during combustion is another aspect that can cause confusion. The light emitted during burning is a result of excited atoms and molecules in the flame that release energy in the form of light when they return to their original state. This is what makes flames visible and gives them their characteristic colors.
In summary, problems with understanding what happens when things burn stem from a lack of knowledge about the combustion process, the role of oxygen, and the production of heat and light energy. Gaining a deeper understanding of these factors can help individuals better comprehend the complex nature of combustion and fire safety.
To know more about things burn refer here
brainly.com/question/29886555#
#SPJ11
What is the mass in grams of 0.30 mol of nahco3?
The mass in grams of 0.30 mol of NaHCO3 can be calculated using the molar mass of NaHCO3, which is 84.01 g/mol.
To do this, we simply multiply the number of moles by the molar mass. Therefore:
Mass in grams = Number of moles x Molar mass
Mass in grams = 0.30 mol x 84.01 g/mol
Mass in grams = 25.203 g
Therefore, the mass in grams of 0.30 mol of NaHCO3 is 25.203 g.
We first need to understand the concept of molar mass. Molar mass is defined as the mass of one mole of a substance and is expressed in grams per mole (g/mol). It is calculated by adding up the atomic masses of all the atoms present in a molecule.
In the case of NaHCO3, the molar mass is calculated by adding the atomic masses of sodium (Na), hydrogen (H), carbon (C), and oxygen (O), which gives us a total of 84.01 g/mol.
When we are given the number of moles of a substance, we can easily convert it to its mass in grams using the formula Mass in grams = Number of moles x Molar mass. This formula helps us to convert the amount of a substance in moles to its corresponding mass in grams.
In conclusion, the mass in grams of 0.30 mol of NaHCO3 is 25.203 g. This calculation was done by multiplying the number of moles of NaHCO3 by its molar mass. Molar mass is a key concept in chemistry, and it allows us to convert between the number of moles of a substance and its mass in grams.
To know more about molar mass, visit:
https://brainly.com/question/22997914#
#SPJ11
At what volume will 22.4l of oz (p) at 303k and 1.2atm have the same number of molecules as neon gas at 303k and 12 atm?
When the volume of neon gas is 2.07 L, 22.4 L of ounce (p) at 303 K and 1.2 atm will have the same number of molecules as neon gas at 303 K and 12 atm.
To solve this problem, we can use the ideal gas law equation:
PV = [tex]nRT[/tex], where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.
First, we need to find the number of moles of neon gas at 303K and 12 atm. We can use the equation PV = [tex]nRT[/tex] and rearrange it to solve for n: n = PV/RT. Plugging in the values, we get:
[tex]n = (12 atm)(22.4 L)/(0.0821 L*atm/mol*K)(303 K)[/tex]
n = 12.04 mol
So, neon gas at 303K and 12 atm has 12.04 moles.
Now, we need to find the volume of oz (p) at 303K and 1.2 atm that has the same number of molecules. We can use the equation n = N/NA, where N is the number of molecules and NA is Avogadro's number (6.022 x 10^23). Rearranging the equation to solve for V, we get:
V = [tex]nRT[/tex]/P
[tex]V = (12.04 mol)(0.0821 L*atm/mol*K)(303 K)/(1.2 atm)[/tex]
V = 249.5 L
Therefore, at 303K and 1.2 atm, 22.4 L of oz (p) has the same number of molecules as neon gas at 303K and 12 atm when the volume is 249.5 L.
To solve this problem, we'll use the Ideal Gas Law equation, PV=[tex]nRT[/tex], where P is pressure, V is volume, n is the number of moles, R is the gas constant, and T is temperature.
First, let's find the number of moles of the given gas, oz (p):
P1 = 1.2 atm
V1 = 22.4 L
T1 = 303 K
R = 0.0821 L atm/mol K (Ideal Gas Constant)
1.2 atm * 22.4 L = n * 0.0821 L atm/mol K * 303 K
n = (1.2 * 22.4) / (0.0821 * 303) = 1 mol
Now, let's find the volume (V2) of neon gas at the given conditions:
P2 = 12 atm
T2 = 303 K
n2 = 1 mol (since we want the same number of molecules)
12 atm * V2 = 1 mol * 0.0821 L atm/mol K * 303 K
V2 = (1 * 0.0821 * 303) / 12 = 2.07 L
Thus, 22.4 L of oz (p) at 303 K and 1.2 atm will have the same number of molecules as neon gas at 303 K and 12 atm when the volume of neon gas is 2.07 L.
For more question on volume
https://brainly.com/question/29796637
#SPJ11
A 3.950 l sample of gas is cooled from 91.50°c to a temperature at which its volume is 2.550 l. what is this new temperature? assume no change in pressure of the gas.
When a 3.950 L sample of gas is cooled from 91.50°C to a volume of 2.550 L with no change in pressure, the new temperature is approximately -36.61°C.
To find the new temperature when a 3.950 L sample of gas is cooled from 91.50°C to a volume of 2.550 L, we can use the Charles' Law formula. Charles' Law states that the volume of a gas is directly proportional to its temperature, assuming that pressure remains constant.
Mathematically, this can be represented as:
V1/T1 = V2/T2
Here, V1 is the initial volume (3.950 L), T1 is the initial temperature (91.50°C), V2 is the final volume (2.550 L), and T2 is the final temperature, which we need to find.
First, convert the initial temperature from Celsius to Kelvin by adding 273.15:
T1 = 91.50°C + 273.15 = 364.65 K
Now, plug the values into the Charles' Law formula:
(3.950 L) / (364.65 K) = (2.550 L) / T2
To find T2, we can cross-multiply and divide:
T2 = (2.550 L) * (364.65 K) / (3.950 L)
T2 ≈ 236.54 K
Finally, convert the temperature back to Celsius by subtracting 273.15:
New temperature = 236.54 K - 273.15 ≈ -36.61°C
In conclusion, when a 3.950 L sample of gas is cooled from 91.50°C to a volume of 2.550 L with no change in pressure, the new temperature is approximately -36.61°C.
To know more about pressure, visit:
https://brainly.com/question/18431008#
#SPJ11
By law, a gallon of ice cream, sold in stores in the US, must have a
weight of at least 4. 5 pounds. Cheap ice cream has a weight of 4. 5
pounds. More expensive ice creams have a mass of 9. 0 pounds. If a
kilogram is about 2. 2 pounds and a gallon is about 3785 milliliters,
what are the densities of the cheap and expensive ice creams?
The volume of the expensive ice cream is: 0.
Densities of the cheap and expensive ice creams, we need to first convert the weights of the ice creams from pounds to kilograms.
1 pound = 0.453592 kilograms
Therefore, the weight of the cheap ice cream in kilograms is:
5 pounds * 0.453592 kilograms/pound = 2. 027 kilograms
The weight of the expensive ice cream in kilograms is:
0 pounds * 0.453592 kilograms/pound = 3. 903 kilogram
The volume of a gallon of ice cream is approximately 3785 milliliters. Therefore, the volume of the cheap ice cream is:
027 kilograms / 3785 milliliters = 0.000557 cubic meters
The volume of the expensive ice cream is:
903 kilograms / 3785 milliliters = 0.00091 cubic meters
The densities of the cheap and expensive ice creams, we can use the following formula:
density = mass / volume
The densities of the cheap and expensive ice creams can then be calculated using the following formula:
density = mass / volume
The mass of the cheap ice cream is:
027 kilograms
The volume of the cheap ice cream is:
0.000557 cubic meters
Therefore, the density of the cheap ice cream is:
027 kilograms / 0.000557 cubic meters = 35. 14 kilograms/cubic meter
The mass of the expensive ice cream is:
903 kilograms
The volume of the expensive ice cream is: 0.
Learn more about volume Visit: brainly.com/question/27710307
#SPJ4
How many moles of products would you make if you added 10. 0 g of Calcium
Chloride to 10. 0 g of Sodium Hydroxide?
Add 10.0 g of calcium chloride to 10.0 g of sodium hydroxide, we will produce 0.0901 moles of calcium hydroxide.
What is Moles?
Moles (mol) is a unit of measurement in chemistry that represents the amount of a substance. One mole of a substance contains the same number of entities, such as atoms, molecules, or ions, as there are atoms in exactly 12 grams of carbon-12.
to calculate the number of moles of calcium chloride present in 10.0 g of the compound. The molar mass of calcium chloride is 111 g/mol, so:
10.0 g Ca[tex]Cl_2[/tex] × (1 mol / 111 g) = 0.0901 mol Ca[tex]Cl_2[/tex]
Similarly, we need to calculate the number of moles of sodium hydroxide present in 10.0 g of the compound. The molar mass of sodium hydroxide is 40 g/mol, so:
10.0 g NaOH × (1 mol / 40 g) = 0.25 mol NaOH
According to the balanced equation, 1 mole of Ca[tex]Cl_2[/tex]reacts with 2 moles of NaOH, so if we have 0.0901 moles of Ca[tex]Cl_2[/tex] and 0.25 moles of NaOH, then the limiting reagent is Ca[tex]Cl_2[/tex]. Therefore, all of the Ca[tex]Cl_2[/tex]will react and the number of moles of products formed will be determined by the amount of Ca[tex]Cl_2[/tex]:
0.0901 mol Ca[tex]Cl_2[/tex] × (1 mol Ca(OH)2 / 1 mol Ca[tex]Cl_2[/tex]) = 0.0901 mol Ca(OH)2
Therefore, if we add 10.0 g of calcium chloride to 10.0 g of sodium hydroxide, we will produce 0.0901 moles of calcium hydroxide.
To know more about Moles, visit;
https://brainly.com/question/29367909
#SPJ4
This reaction will produce 0.125 moles of Ca(OH)2
How many moles are produced?
To determine the number of moles of products formed when 10.0 g of calcium chloride (CaCl2) is added to 10.0 g of sodium hydroxide (NaOH), we need to first determine which chemical reaction takes place and the limiting reagent.
The chemical equation for the reaction between calcium chloride and sodium hydroxide is:
CaCl2 + 2 NaOH → Ca(OH)2 + 2 NaCl
From the balanced equation, we can see that 1 mole of calcium chloride reacts with 2 moles of sodium hydroxide to produce 1 mole of calcium hydroxide and 2 moles of sodium chloride.
The molar masses of calcium chloride and sodium hydroxide are:
Calcium chloride (CaCl2): 40.08 g/mol + 2 x 35.45 g/mol = 110.98 g/molSodium hydroxide (NaOH): 22.99 g/mol + 15.99 g/mol + 1.01 g/mol = 40.00 g/molUsing the molar masses, we can convert the masses of calcium chloride and sodium hydroxide to moles:
Moles of CaCl2 = 10.0 g / 110.98 g/mol = 0.090 molesMoles of NaOH = 10.0 g / 40.00 g/mol = 0.250 molesWe can see that there is an excess of sodium hydroxide, so it is the limiting reagent. Using the stoichiometry of the balanced equation, we can determine the number of moles of products formed:
2 moles of NaOH react with 1 mole of CaCl2 to produce 1 mole of Ca(OH)2
Therefore, 0.250 moles of NaOH will react with 0.125 moles of CaCl2 to produce 0.125 moles of Ca(OH)2
Learn more about moles at:
https://brainly.com/question/29367909
#SPJ1
Substances can be the same if one has more of the same type of repeating group of atoms
Yes, substances can be the same if one has more of the same type of repeating group of atoms.
For example, polymers are made up of repeating units of the same monomer, and the number of monomers can vary, resulting in different sizes of polymers but still the same substance. Another example is isotopes, which are elements with the same number of protons but varying numbers of neutrons.
They have the same chemical properties and can form the same compounds despite having different atomic masses. Thus, substances can be identical in terms of their chemical properties even if they have different physical properties due to variations in the number of repeating groups of atoms or isotopes.
To know more about isotopes click on below link:
https://brainly.com/question/21536220#
#SPJ11
I don’t know how to do this, can someone please tell me how with the steps.
The mass (in grams) of sodium carbonate, Na₂CO₃ needed to react completely with 25 mL of vinegar is 1.17 grams
How do i determine the mass of sodium carbonate, Na₂CO₃ needed?First, we shall obtain the mole in 25 mL of vinegar, HC₂H₃O₂
Volume = 25 mL = 25 / 1000 = 0.025 LMolarity = 0.875 MMole of HC₂H₃O₂ =?Mole = molarity × volume
Mole of HC₂H₃O₂ = 0.875 × 0.025
Mole of HC₂H₃O₂ = 0.022 mole
Next, we shall determine the mole of sodium carbonate, Na₂CO₃ that react. Details below:
Na₂CO₃ + 2HC₂H₃O₂ -> 2NaC₂H₃O₂ + CO₂ + H₂O
From the balanced equation above,
2 moles of HC₂H₃O₂ reacted with 1 mole of Na₂CO₃
Therefore,
0.022 mole of HC₂H₃O₂ will react with = 0.022 / 2 = 0.011 mole of Na₂CO₃
Finally, we shall determine the mass of Na₂CO₃ needed. Details below:
Mole of Na₂CO₃ = 0.011 molesMolar mass of Na₂CO₃ = 106 g/molMass of Na₂CO₃ = ?Mass = Mole × molar mass
Mass of Na₂CO₃ = 0.011 × 106
Mass of Na₂CO₃ = 1.17 grams
Learn more about mass:
https://brainly.com/question/21940152
#SPJ1
3 Zn + 2 H3PO4 → 3 H2 + Zn3(PO4)2
How many grams of Zn are needed in order to produce 0. 15 g of H2?
4.85 grams of Zn are needed to produce 0.15 grams of H2.
The balanced chemical equation for the reaction between zinc and phosphoric acid is:
[tex]3 Zn + 2 H_3PO_4[/tex] → [tex]3 H_2 + Zn_3(PO4)2[/tex]
Step 1: Calculate the number of moles of [tex]H_2[/tex] produced
We can use the molar mass of hydrogen gas ([tex]H_2[/tex]) to calculate the number of moles produced:
n([tex]H_2[/tex]) = mass of [tex]H_2[/tex] / molar mass of [tex]H_2[/tex]
n([tex]H_2[/tex]) = 0.15 g / 2.016 g/mol = 0.0743 mol
Step 2: Calculate mass [tex]Z_2[/tex] needed
We can use the molar mass of zinc to convert moles of Zn to grams of Zn:
mass of Zn = n(Zn) x molar mass of Zn
mass of Zn = 0.0743 mol x 65.38 g/mol
mass of Zn = 4.85 g
To know more about molar mass , here
brainly.com/question/22997914
#SPJ4
what conclusions can you draw about the relationship between the structure of the fabric molecule and the intensity with which the azo dyes color the fabric?
Please help
3) a student claims that the reaction of hydrogen and oxygen to form
water is evidence supporting the claim that mass is conserved in a
chemical reaction. the chemical equation the student uses for the reaction
is h2 + o2 --> h2o. does this evidence support the claim? why or why not?*
a.) yes, it supports the claim because all the elements in the reactants appear in the
product.
b.) no, it does not support the claim because it is not a closed system.
c.) yes, it supports the claim because the reaction equation is balanced.
d.) no, it does not support the claim because the reaction equation is not balanced.
Yes, this evidence supports the claim that mass is conserved in a chemical reaction because the reaction equation is balanced.
This means that the same number of atoms of each element is present in the reactants as in the products. This is the fundamental principle of conservation of mass, which states that mass is neither created nor destroyed during a chemical reaction.
The conservation of mass can also be verified by calculating the total mass of the reactants and comparing it to the total mass of the products.
If the same amount of mass is present in both reactants and products, then the reaction equation is balanced and the conservation of mass is supported.
Know more about Chemical reaction here
https://brainly.com/question/29039149#
#SPJ11