How many valence electrons would there be in an atom with 14 protons?

Answers

Answer 1

There would be 4 valence electrons  in an atom with 14 protons

An element is any substance made entirely of one type of atom. For instance, all of the atoms that make up the element carbon are carbon atoms. The atomic number of an element describes how many protons are present in that element's atoms. Inside a neutral atom, the number of protons and electrons must be equal.

The atomic number of an element also serves as a guide to its location on the periodic table.

According to the question, an element has 14 electrons. This implies that it must have 14 protons, indicating that its atomic number is 14.

We must first list any possible electrical configurations for the element before we may locate it:

1s²2s²2p⁶3s²3p²

In the outermost shell, there are four electrons. The element therefore has 4 electrons in its valence shell is 4

Learn more about atomic number at https://brainly.com/question/8834373

#SPJ4


Related Questions

(50 points help ASAP it’s due 10mins)About how much more TE does it take to change the temperature of 1 kg of water compared to 1 kg of iron?

A. 5:L1

B. 12:1

C. 9:1

D. 2:1

Answers

Answer:c

Explanation:

Why is bromine the most reactive?

Answers

Being a highly chemically reactive metal having seven valence electrons and even a high attraction for electrons, bromine reacts quickly as well as violently with alkali metals, therefore is rarely found in nature pure.

Despite being a potent oxidizer, it is difficult to break down under typical circumstances. Fluorine was the strongest active halogen, followed by chlorine, bromine, as well as iodine.

Since bromine has a higher atomic radius over chlorine, it is much less reactive. Compared to chlorine, bromine does not hold electrons as tightly. This is supported by the fact that chlorine contains fewer electron shells, which causes the electrons to connect nearer to the nucleus.

Due to its lower reactivity, the bromine radical is so much more selective for such 2° radical. Cl• is much less picky and less selective since it is less stable as well as more reactive.

To know more about  chemically reactive

https://brainly.com/question/9621716

#SPJ4

The highest pressure measured in Jupiter's upper atmosphere by the Galileo probe is ×1.67104torr. Calculate the highest pressure measured in mmHg and atm. Round each of your answers to 3 significant digits.

Answers

Answer:  16700 mmHg , 22,0 atm

Explanation:   1 torr  = 1 mmHg, so p = 16700 torr = 16700 mmHg

1 atm = 101325 Pa = 760 torr

16700 torr / 760 = 21,97 atm

i am boréd wanna chàt​

Answers

yeah same I'm bóred too -,-

Answer:

sure hi ...............................

Corn plants and milkweed plants grow in the same area. Over several years, the milkweed plants have taken over the field and the corn plants no longer have space to grow.

Answers

Answer:

This question is incomplete, the complete part of the question is as follows:

This best demonstrates which type of an interaction between the plants?

A. cooperation

B. parasitism

C. commensalism

D. competition

The answer is D

Explanation:

Organisms in their natural environment interact with one another in so many ways. The ways by which this interaction occurs are; competition, predation, commensalism etc.

Competition is the interaction between two organisms in which one or both organisms are harmed due to limited resources. Competition occurs when the organisms involved occupy the same niche or utilize the same limited resources.

In this question involving corn plants and milkweed plants. They are said to grow in the same area. Over several years, the milkweed plants have taken over the field and the corn plants no longer have space to grow. In this case, there is a limited space for growth, hence, the corn plant and milkweed COMPETE.

The unheated gas in the above system has a volume of 20.0L
at a temperature of 25.0 °C and a pressure of 1.00 atm. The
gas is heated to a temperature of 100.0 °C while the volume
remains constant. What is the pressure of the heated gas?
Ignore the block labeled "A".
da Hint?

Answers

Answer:

need more info on block labeled ''A''

Explanation:

what are standard conditions when working with gases?

Answers

Answer:

STP in chemistry is the abbreviation for Standard Temperature and Pressure. STP most commonly is used when performing calculations on gases, such as gas density. The standard temperature is 273 K (0° Celsius or 32° Fahrenheit) and the standard pressure is 1 atm pressure.

How many grams of chlorine gas react when 266.28 grams of aluminum reacts

Answers

Answer:

We can answer this question if the chemical reaction provided to this question is provided to us.

How many mol ratios can be obtained from the following chemical equation? Na2s + cd(No3)2 ———-> 2 NaNo3 +cds

Answers

12mol ratios can be obtained .



In chemistry, what is the net ionic equation?

The net ionic equation is a chemical equation that only depicts the elements, compounds, and ions that are directly involved in the chemical process.
As previously stated, we employ net ionic equations to highlight the molecules that change throughout the reaction. It makes it simple to identify the active molecules in a reaction since they are the only ones in the equation.

Fill in the blanks with the balanced molecular equation.
For each substance, write the state (s, l, g, aq).
Break down strong electrolytes into ions (the complete ionic equation).
Remove the spectator ions from both sides of the full ionic equation.



To learn more about mol ratios  to refer:
https://brainly.com/question/29478671
#SPJ1

An example of a secondary sex characteristic is the increase in hair on some parts of the body.

Which organ(s) would be responsible for this trait? Select two options.

a. the thyroid
b. the ovaries
c. the thymus
d. the adrenal gland
e. the testes
f. the pancreas

Answers

Answer:

The ovaries the testes

Explanation:

Do good!

Contaminants such as fertilizers, pesticides, and animal waste being released into nearby air and water can cause ___

A:Water pollution


B: Dead zones


C: Human health issues


D: All of the above​

Answers

Answer:

The answer is D all of the above

Explanation:

what are local winds. be more detailed. and in your own words

Answers

Answer:

High and low pressure regions form when there is a large temperature difference between the surface of the sea (or a large lake) and the land next to it. Local winds are created as a result of this. Warmer air from the ocean rises and then sinks on land, causing the temperature to rise over the land.

Grade7science
Can somebody plz help answer this science question ? (Will mark brainliest whoever amasses first) :DDD!

Answers

Answer:

From becoming magma. It comes to the surface because of the tectonic plates shifting, it's able to escape from the cracks. it also may cause the plates to melt and allow the magma to rise.

Explanation:

deep underground, rocks are put under tons of pressure and extremely hot temperatures, causing them to melt into magma. sometimes the magma cools and becomes igneous rock. Magma makes it to the surface by either escaping through cracks in tectonic plates or by melting the plates and rising.

HOW TO DO THIS QUESTION PLEASE ​

Answers

Answer:

-mass number

-Iodine was placed after tellurium because it has a lower atomic mass

Diatomic elements are important. what makes them different from other elemental substances?

Answers

Diatomic elements are elements that exist as molecules composed of two atoms of the same element.

What is Diatomic?

Diatomic molecules are molecules composed of two atoms, such as Oxygen (O2), Hydrogen (H2), Nitrogen (N2), and Fluorine (F2). Diatomic molecules are the most common type of molecules in nature and are found in all three states of matter (solid, liquid, and gas). Diatomic molecules contain only two atoms and do not contain any other elements or molecules.

This is in contrast to other elemental substances, which exist as individual atoms or molecules composed of different elements. Diatomic elements have unique chemical and physical properties due to the strong bond between the two atoms.

To learn more about Diatomic
https://brainly.com/question/15067534
#SPJ4

Classify the following alcohols as primary secondary and tertiary alcohols​

Answers

Following is the list of primary secondary and tertiary alcohols.

Alcohols are chemical compounds made composed of an alkyl or aryl group and a hydroxyl group (ROH). A fundamental alcohol is a hydroxyl carbon with just one R group. If it contains two R groups, it is a secondary alcohol, and if it has three R groups, it is a tertiary alcohol.

Look at the carbon bonded to OH to identify whether an alcohol is primary, secondary, or tertiary. The alcohol is primary, secondary, or tertiary depending on how many other carbons are connected to that carbon. It is methanol if there are three hydrogens and no carbons, which is a rare combination.

For the given formulas, following are different types of alcohols -

a) Primary Alcohols

b) Tertiary Alcohol

c) Secondary Alcohol

d) Primary Alcohol

e) Primary Alcohol

f) secondary Alcohol

To learn more about primary secondary and tertiary alcohols​ from given link

https://brainly.com/question/28108673

#SPJ1

What is the mass in grams of 6.02 x10 23 N 2 molecules?

Answers

The mass in grams of 6.02×[tex]10^{23}[/tex]  N2 molecules is 9.24×[tex]10^{23}[/tex] gram.

This is because each molecule of N2 is composed of two atoms of nitrogen, which each have a mass of 14.0067 grams.

Thus, the total mass of 6.022×[tex]10^{23}[/tex] N2 molecules is calculated by multiplying the number of molecules by the mass of each molecule, which is 28.0134 grams.

14.0067×2=28.013grams

This gives us a total mass of

6.02×1023×28.0134=9.24×[tex]10^{23}[/tex] grams

Molar mass:

Molar mass is the mass of one mole of a substance. It is expressed in grams per mole (g/mol). It is calculated by adding up the atomic weights of all the atoms in a molecule or formula unit of a compound. It is a useful measure when calculating the mass of a substance, or when calculating stoichiometric ratios in a chemical reaction.

Therefore the mass of 6.022×[tex]10^{23}[/tex] N2 molecule is 9.24×[tex]10^{23}[/tex]grams.

Learn more about molar mass:

https://brainly.com/question/25274322

#SPJ4

The IUPAC name for dimethyl ketone is ) 2-propanal. B) 3-propanal. C) 2-propanone. D) 1-propanone. E) acetone

Answers

The IUPAC name for dimethyl ketone is (C) 2-propanone

The prefix "di-" indicates two methyl groups (CH3) is attached to the parent compound, which is a ketone. The parent compound is also known as propanone.

It is a clear, colorless liquid that is commonly used as a solvent and in the production of various chemicals and materials. It is also known as acetone. It is used as a solvent, as a starting material in the synthesis of other compounds, and as an intermediate in the production of certain polymers.

Utilized to create compounds such as plastic, fiber, medicines, and other substances. Other compounds can also be dissolved with it. It is a byproduct of the breakdown of human fat and is found naturally in plants, trees, volcanic gases, forest fires, and other organisms.

Learn more about 2-propanone here: https://brainly.com/question/29167289

#SPJ4

What is the molarity of a LiOH solution if 15. 5 mL of a 0. 112 M H2SO4 solution is

required to neutralize a 25. 0-ml sample of the LiOH solution?

2LiOH + H2SO4 --> Li + 2H20

Answers

Molarity is a measure of the amount of solute that is dissolved in a given amount of solution.

What exactly is Molarity?

Molarity is a measure of the concentration of a solution, defined as the number of moles of a solute per liter of solution. It is typically expressed as moles per liter, or M. Molarity is an important concept in many chemistry and biology applications, as it can be used to determine the amount of a certain element or compound that is present in a solution.

Moles of H2SO4 required to neutralize LiOH = (15.5 mL x 0.112 M H2SO4) / 1000 mL = 0.01728 moles

Moles of LiOH used = 0.01728 moles

Moles of LiOH in 25.0 mL sample = (25.0 mL x Molarity of LiOH) / 1000 mL

Molarity of LiOH = (0.01728 moles x 1000 mL) / 25.0 mL = 0.6912 M LiOH

Hence, the molarity of a LiOH solution is 0.6912 M.

To know more about Molarity,

https://brainly.com/question/17138838

#SPJ4

Among the following radioactive parent isotopes, which has the shortest half-life?A) uranium-238B) potassium-40C) rubidium-87D) carbon-14

Answers

The half-life of a radioactive isotope is the time it takes for half of the original number of atoms in a sample to decay.

The isotope with the shortest half-life among the given options is:

D) carbon-14

The half-life of carbon-14 is 5,730 years which is shorter than the other isotopes. Uranium-238 has a half-life of 4.5 billion years, potassium-40 has a half-life of 1.25 billion years and rubidium-87 has a half-life of 49.8 billion years, all are greater than the half-life of carbon-14.

So, carbon-14 is the isotope with the shortest half-life among the given options.

It is important to note that the half-life of an isotope is a constant property of the isotope. For example, the half-life of carbon-14 is always 5,730 years and does not change with the amount of carbon-14 present or any other factors.

Learn more about Half-life reactions here: https://brainly.com/question/29604077

#SPJ4

Why do you think seasons last for different amounts of time on different planets? *
A : They are far away from the Sun B: They have different orbits around the Sun C: They are different temperatures D: They are in different solar systems ?

Answers

Here's link[tex]^{}[/tex] to the answer:

bit.[tex]^{}[/tex]ly/3gVQKw3

Answer:

B

Explanation:

What is the car doing

Answers

Answer: Moving?

Explanation:

The pressure of a 5.2mol sample of C3H8 in a 35.3 L container is measured to be 5.5 atm. What is the temperature of this gas in kelvins?

Answers

Answer:

T° = 453.6 K

Explanation:

Let's apply the Ideal Gases Law to solve the question:

Pressure . Volume = number of moles . R . T°

We replace data:

5.5 atm . 35.3L = 5.2 mol . 0.082 L.atm/mol.K .T°

T° = (5.5 atm . 35.3L) / (5.2 mol . 0.082 L.atm/mol.K)

T° = 453.6 K

The Ideal Gases Law contains the Absolute value of T° (Kelvin degrees)

So the final answer is: 453.6 K

You can also determine this, because the unit of R (Ideal Gases constant)

A spinner with 6 equally sized slices has 3 red slices, 1 yellow slice, and 2 blue slices. The dial is spun and stops on a slice at random. What is the probability that the dial stops on a red slice? Write your answer as a fraction in simplest form.

Answers

Answer:

1/2

Explanation:

Is it true that only 2 ATP are formed during anaerobic respiration?

Answers

Pyruvate is converted to lactate in anaerobic conditions by anaerobic glycolysis. During anaerobic respiration, two ATP molecules are produced.

What is the primary step in glycolysis?

The method by which glucose is metabolized to produce energy is known as glycolysis. It generates water, ATP, NADH, and two pyruvate molecules. It doesn't need oxygen to happen because it happens in a cell's cytoplasm. Both in aerobic and anaerobic organisms, it happens.

How is glycolysis referred to?

Gustav Embden, Otto Meyerhof, & Jakub Karol Parnas identified the Embden-Meyerhof-Parnas (EMP) pathway, which is the most typical kind of glycolysis. The Entner-Doudoroff pathway and several heterofermentative & homofermentative pathways are examples of additional pathways that are included in the term "glycolysis."

To know more about glycolysis visit:

https://brainly.com/question/14076989

#SPJ4

In anaerobic circumstances, anaerobic glycolysis converts pyruvate to lactate. Two ATP molecules are created during anaerobic respiration.

What is the first stage of glycolysis?

The process of converting glucose into energy is known as glycolysis. Water, ATP, NADH, and two pyruvate molecules are produced. It does not require oxygen to occur since it occurs in the cytoplasm of a cell. It occurs in both aerobic and anaerobic species.

How is glycolysis defined?

The Embden-Meyerhof-Parnas (EMP) route, which is the most common kind of glycolysis, was discovered by Gustav Embden, Otto Meyerhof, and Jakub Karol Parnas. Additional processes included in the word "glycolysis" include the Entner-Doudoroff pathway and numerous heterofermentative and homofermentative pathways.

Here,

Anaerobic glycolysis converts pyruvate to lactate under anaerobic conditions. During anaerobic respiration, two ATP molecules are produced.

To learn more about glycolysis, go to:

brainly.com/question/14076989

#SPJ4

Select the correct answer.
How does activation energy affect a chemical reaction?

A. It increases the energy of the reactants.
B. It determines how difficult it is to start the reaction.
C. It determines how much product can form,
D. It decreases the energy of the products,

Answers

The correct answer is c

Answer:

The source of the activation energy needed to push reactions forward is typically heat energy from the surroundings.

Explanation:

The activation energy of a particular reaction determines the rate at which it will proceed. The higher the activation energy, the slower the chemical reaction will be

So
A scientist collected a 37.50 g sample of a
compound. Determine the % composition
of Cr in the compound if the sample is
made up of 19.01g O, Oxygen and 4.76 g
C, Carbon, and the remainder is Cr,
chromium. Type your answer to two
decimal places. Do not put the percent
sign.

Answers

Mass is a measure of an object's resistance to acceleration.

1. Calculate the total mass of the sample:

37.50 g

2. Calculate the total mass of the elements O and C:

19.01 g + 4.76 g = 23.77 g

3. Calculate the mass of Cr:

37.50 g - 23.77 g = 13.73 g

4. Calculate the composition of Cr in the compound:

13.73 g / 37.50 g x 100 = 36.56

What is Mass?

The resistance to acceleration of an object is measured by its mass. It is a fundamental property of physical objects and is often expressed in kilograms (kg) or grams (g). Mass is related to the inertia of an object, which is a measure of how difficult it is to change the object's motion. Mass also determines the strength of the gravitational force acting on an object.

To know more about Mass,

https://brainly.com/question/28021242

#SPJ1

Select the correct answer. the zeroth law of thermodynamics describes the state where we can say what about the movement of heat between two substances?
a. the latent heat is increasing
b. the movement of heat is rapid
c. there is no movement of heat
d. the latent heat is decreasing
e. the movement of heat is slow

Answers

The zeroth law of thermodynamics describes the state where we can say what about the movement of heat between two substances

The Zeroth Law of thermodynamics is a basic law that describes the state in which two bodies are in thermal equilibrium. It states that if two bodies are in thermal equilibrium with a third body, then they are in thermal equilibrium with each other. In other words, it allows us to determine if two bodies are at the same temperature and if there is no heat flow between them. So, it describes the state where there is no movement of heat between two substances.

Learn more about The zeroth law of thermodynamics here: https://brainly.com/question/3985078

#SPJ4

4 The Mr of sodium hydroxide is 40. How many grams of sodium hydroxide are there in: a 500 cm³ of a molar solution? b 25 cm³ of a 0.5 M solution?​

Answers

There are 20 grams of Sodium hydroxide in a molar solution that has a volume of 500 cm3.

Sodium hydroxide – what is it? (NaOH)

Caustic soda and lye are two other names for sodium hydroxide. It is a typical component of soaps and cleansers. Sodium hydroxide seems to be a white, unscented solid at room temperature. Sodium hydroxide is a colorless, odorless liquid. Strong acids and water can cause explosive reactions with it.

Molarity is calculated by

moles (solute) / volume of solution in L

No. of moles = mass / molar mass

We have to find mass of sodium hydroxide (NaOH)

As we know, in 1 L (1000 cm³) of molar solution there is 40 gram of NaOH present.

From using this statement, 500 cm³ of a molar solution, means half liter of a molar solution contain -

= 40 / 2

= 20 gram of NaOH.

To know more about sodium hydroxide visit :

https://brainly.com/question/24010534

#SPJ1

Why were the authors interested in determining the strength of the hydrogen bond in solution as opposed to in a vacuum

Answers

This is because intermolecular forces have a greater effect in a solution when bonding is present than in a vacuum when bonding is not present.

The attracting and repellent forces that develop between the molecules of a substance are known as intermolecular forces or IMF for short. Individual molecules of a substance interact with one another through the mediation of these forces.

Most of the physical and chemical features of matter are caused by intermolecular forces.

An intermolecular force is an attractive force that develops between the protons or positive parts of one molecule and the electrons or negative parts of another molecule. This force affects a substance's many physical and chemical properties. The strength of a material's intermolecular forces directly relates to the boiling point of that substance; the stronger the intermolecular forces, the higher the boiling point.

Learn more about Intermolecular forces  here:

https://brainly.com/question/9007693

#SPJ4

Other Questions
A baker makes peanut butter cookies and chocolate chip cookies.1. She needs 2 cups of flour and 3/4 cup of butter to make one batch of peanut butter cookies.2.She needs 3 cups of flour and 1 cup of butter to make one batch of chocolate chip cookies.If the baker has 26 cups of flour and 9 cups of butter, how many batches of each type of cookie can she make? For what value of a the system of linear equations Ax 3y a 3 12x ay A has no solutions? Research studies show that the relationship between the tire pressure of a vehicles tires and the life of the tires is quadratic. The following table shows the recommended tire pressure of a cars tires (in pounds per square inch) and its anticipated tire life (in thousands of miles).Tire Pressure Tire Life29 46.832 57.634 58.836 60.038 58.840 57.042 52.8Use a graphing or online regression calculator to find the quadratic function of best fit for this set of data. What is the value of a in this function?-0.240947-2.40947-0.00240947-0.0240947 Select the correct answer. A boy is pushing a chair by applying a force of 5 newtons. His mother helps him push it faster by applying an additional force of 7 newtons in the same direction. What is the net force acting on the chair A 13-foot ladder leans against the side of a house with its base 3 feet from the house. Use the Pythagorean Theorem to approximate how high the ladder reaches up the side of the house. Round your answer to the nearest hundredth. It's have an other definition for Anthropometry Joseph bicycled 3 miles farther than Nickeisha. The sum of the distances they bicycled was 25 miles. How far did Nickeisha bicycle Which of the following is a function of elder care benefits offered by organizations?A) direct financial assistanceB) tax exemptions on medical bills of the dependent eldersC) setting up elderly care facilities close to the workplaceD) information,referrals,and supportE) providing vouchers and discounts to help employees access the existing elderly care facilities 24 water bottles for $2.95 N is an integer such that 3n+4 the chef mixes 12 tablespoons of flour to 8 tablespoons of sugar what fraction of the mixture is sugar. in most organizations, the ____ department is responsible for output control and security measures. 6 46 = 24 16TrueTrueFalseFalse Manny begins his new job on Monday. He will work 8 hours each day and will be paid $10.50 for each hour that he works. Part A: How many days will Manny need to work in order to earn $2,100?Part B: If Manny works 5 days each week, how many weeks will he need to work in order to earn $2,100? acetty IIScience: 01/13: LS RecordingXin wonder what did auggie hav XS Student Email StudentsMicrosoft Office Homeuview.instructure.com/courses/5060/quizzes/119344Venus is called Earth's sister planet because it is almost thesame mass and diameter as Earth.Use the solar system diagram and the data table tocompare the gravitational attraction of the Sun on thesetwo planets.This will be your CLAIM.OUR SOLAR SYSTEMASTEROIDSSGIOB013MOON EARTHURANUSSATURNPLUTOJUPITERCOMETSOur Solar SystemInner PlanetsDistance fromPlanetthe Sun (inmillion miles)Mercury 36Diameter (inmiles)Temperature Number of(kelvin) Moon3,031100-700K0Venus67.27.521726K0Earth937.9261260-310KMars141.64,222150-310K2 trigonometry PLEASE HELP ASAP TYY Select the graph that correctly displays the solution of the system of inequalities. y > 2x 4 y x 7 q significa I love you? The temperature is -5 degrees. Name the temperature that would make the sum of the two temperatures 0 degrees. EXPLAIN YOUR ANSWER(DO NOT SEND ANY LINKS, YOU WILL GET REPORTED) Given the answer for part D, write an expression that will tell you the direction the robot is going if, in the course of its journey, it turns left 21 times and turns right 22 times. Does the order the robot makes the turns in matter for the purpose of knowing the direction it is finally facing?The answer to part D is in the picture...