The graph of the balancing voltage as a function of plate separation is shown below: Plotting the given data on a graph gives a straight line.
The slope of the graph of the balancing voltage as a function of plate separation is:$$\text{slope} = \frac{\Delta V}{\Delta d} = \frac{155 - 5}{0.8 - 0.2} = 150$$.
The physical quantity or quantities that the slope have is capacitance $(C)$ because, by definition,$$\text{slope} = \frac{\Delta V}{\Delta d} = \frac{Q}{C}$$where $Q$ is the charge on the plates.From the modified Millikan's Oil Drop experiment, the weight of the small charged object suspended by the electric field that is between two parallel plates is given as,$$W = mg$$where $m = 3.80 \times 10^{-15} \ kg$.The electrostatic force is given as,$$F_{es} = Eq$$where $E$ is the electric field and $q$ is the charge on the small charged object. When the object is suspended in the electric field, the electrostatic force and the weight are equal and opposite. Therefore, $$F_{es} = mg$$$$Eq = mg$$Solving for $q$ gives,$$q = \frac{mg}{E}$$where $E$ is the slope of the graph and is equal to 150.
Therefore,$$q = \frac{mg}{150} = \frac{(3.80 \times 10^{-15} \ kg)(9.81 \ m/s^2)}{150} = 2.47 \times 10^{-19} \ C$$The balancing voltage when the plates are separated by 50.0 mm can be found using the equation,$$\text{slope} = \frac{\Delta V}{\Delta d}$$Rearranging, $$\Delta V = \text{slope} \times \Delta d = 150 \times 0.050 \ m = 7.5 \ V$$Therefore, the value of the balancing voltage when the plates are separated by 50.0 mm is 7.5 V.
Learn more on voltage here:
brainly.in/question/20045053
#SPJ11
A 2om long see-saw has inertia a moment of 200kgm with respect pivot point, if someone pushes down one end with a force of 400N What is angular acceleration ? ? p
The angular acceleration of a 20m long see-saw with an inertia moment of 200kgm, when one end is pushed down with a force of 400N, is 40 [tex]rad/s^2[/tex].
To find the angular acceleration of the see-saw, we can use the formula for torque:
τ = Iα,
where τ represents the torque, I is the inertia moment, and α denotes the angular acceleration. The torque is given by the product of the force applied (F) and the distance from the pivot point (r).
In this case, the force applied is 400N, and the length of the see-saw is 20m. Thus, the torque is calculated as:
τ = F × r = 400N × 20m = 8000 Nm.
Given that the inertia moment of the see-saw is 200kgm, so τ = Iα can be rearranged to find α:
α = τ / I.
Plugging in the values,
α = 8000 Nm / 200kgm = 40 [tex]rad/s^2[/tex].
Therefore, the angular acceleration of the see-saw is 40 [tex]rad/s^2[/tex].
To know more about angular acceleration, visit
https://brainly.com/question/1980605
#SPJ11
Calculate the net force on particle q1.
Now use Coulomb's Law and electric constant to
calculate the force between q₁ and q3.
F₁ = -14.4 N
+13.0 μC
q1
0.25 m
q1q3
2
F2 = ket
ke = 8.99 × 10⁹
r = 0.55 m
+7.70 C
+q2
F₂ = +[?] N
0.30 m
-5.90 C
q3
Enter
Answer:
99.64 N
Explanation:
To calculate the net force on particle q1, we need to consider both the force F₁ and the force F₂. Given that F₁ = -14.4 N, we already have that value. Now let's calculate the force between q₁ and q₃ using Coulomb's Law.
Coulomb's Law states that the force between two charged particles is given by:
F = (k * |q₁ * q₃|) / r²
where F is the force, k is the electric constant (k = 8.99 × 10⁹ Nm²/C²), q₁ and q₃ are the magnitudes of the charges, and r is the distance between them.
Substituting the given values into the formula:
F₂ = (8.99 × 10⁹ * |(+13.0 μC) * (+7.70 C)|) / (0.30 m)²
To simplify the calculation, we need to convert the charges into coulombs:
13.0 μC = 13.0 × 10⁻⁶ C
7.70 C remains the same
Now we can calculate the force:
F₂ = (8.99 × 10⁹ * |(13.0 × 10⁻⁶ C) * (7.70 C)|) / (0.30 m)²
F₂ ≈ (8.99 × 10⁹ * (0.0001001 C²)) / 0.09 m²
F₂ ≈ 8.99 × 10⁹ * 0.0011122 C² / 0.09 m²
F₂ ≈ 99.964 N
Therefore, the force between q₁ and q₃ (F₂) is approximately 99.964 N.
A 15N force is applied to a 2.0 kg cart that is moving along a plane inclined at an angle of 30.0⁰ above the horizontal. The applied force is in the same direction as the cart's motion. If the cart travels 40.0 cm, how much work does the applied force do on the cart?
The work done by the applied force on the cart is approximately 5.196 Joules (J). The International System of Units uses the joule as its unit of energy.
To calculate the work done by the applied force on the cart, we can use the formula:
Work = Force × Distance × cos(θ)
Where:
Force = 15 N (applied force)
Distance = 40.0 cm = 0.40 m (distance traveled by the cart)
θ = 30.0 degrees (angle of the inclined plane)
Plugging in the values:
Work = 15 N × 0.40 m × cos(30.0 degrees)
Using the value of cos(30.0 degrees) = √3/2:
Work = 15 N × 0.40 m × (√3/2)
Work = 15 N × 0.40 m × 0.866
Work ≈ 5.196 N·m
To know more about unit of energy
https://brainly.com/question/14791143
#SPJ11
A beam of radiation is propagating inside a dielectric of refractive index n= 1.5 and is incident on a dielectric/free space interface. If the angle of incidence is 80° and the radiation has a wavelength of 500 nm in free space, calculate the distance outside the medium at which the electric field amplitude has dropped to 10% of its value at the surface. (2 marks) Explain the meaning of the term frustrated total internal reflection, and describe any advantages or disadvantages arising from this phenomenon. (2 marks)
The angle of incidence, refractive index, and wavelength are used to determine the critical angle and the angle of refraction at the interface. From there, the distance can be calculated using trigonometry and the decay equation.
To calculate the distance outside the dielectric at which the electric field amplitude drops to 10% of its value at the surface, we need to consider the decay of the electric field in the dielectric material. The angle of incidence (80°) and the refractive index (n = 1.5) are used to determine the critical angle and the angle of refraction at the interface between the dielectric and free space. With these angles, we can calculate the distance at which the electric field amplitude drops to 10% of its value.
Frustrated total internal reflection refers to the phenomenon where total internal reflection does not occur at the interface between two mediums, such as from a higher refractive index medium to a lower refractive index medium. This can happen when the angle of incidence exceeds the critical angle, but instead of all the light being reflected, a small portion of it is transmitted into the second medium. Frustrated total internal reflection can be advantageous in applications like optical fibers and waveguides, where it allows controlled transmission of light. However, it can also be disadvantageous when trying to achieve complete reflection, such as in certain optical devices or when designing systems that rely on total internal reflection for efficient light confinement.
Learn more about refractive index here:
https://brainly.com/question/30761100
#SPJ11
I₁ = 102 - 32° Arms I2 = 184 + 49° Arms 13 = = 172 + 155° Arms ZA = 3 + j2 Ω Zg = 4 - j4 Ω ZA Zc = 10-j3 n Ω 13 The average power absorbed by impedance Z, in the circuit above is closest to... The reactive power absorbed by impedance Zc in the circuit above is closest to... I₁ ZB Zc
Average power absorbed by impedance Z: 10404 * Re(Z)
Reactive power absorbed by impedance Zc: 29584 * Im(Zc)
To calculate the average power absorbed by impedance Z and the reactive power absorbed by impedance Zc in the given circuit, we can use the formulas for power calculations in AC circuits.
Given values:
I₁ = 102 ∠ -32° A
I₂ = 184 ∠ 49° A
I₃ = 172 ∠ 155° A
ZA = 3 + j2 Ω
Zg = 4 - j4 Ω
Zc = 10 - j3 Ω
Average Power Absorbed by Impedance Z:
The average power (P) absorbed by an impedance Z can be calculated using the formula:
P = |I|² * Re(Z)
Where |I| is the magnitude of the current and Re(Z) is the real part of the impedance.
In this case, the impedance Z is not directly given, but we can calculate it by adding the parallel combination of ZA and Zg:
Z = (ZA * Zg) / (ZA + Zg)
Calculating Z:
Z = (3 + j2) * (4 - j4) / (3 + j2 + 4 - j4)
= (12 + j12 + j8 - j8) / (7 - j2)
= (12 + j20) / (7 - j2)
Now, we can calculate the average power absorbed by impedance Z:
P = |I₁|² * Re(Z)
= |102 ∠ -32°|² * Re(Z)
= (102)² * Re(Z)
= 10404 * Re(Z)
Reactive Power Absorbed by Impedance Zc:
The reactive power (Q) absorbed by an impedance Zc can be calculated using the formula:
Q = |I|² * Im(Zc)
Where |I| is the magnitude of the current and Im(Zc) is the imaginary part of the impedance Zc.
Now, we can calculate the reactive power absorbed by impedance Zc:
Q = |I₃|² * Im(Zc)
= |172 ∠ 155°|² * Im(Zc)
= (172)² * Im(Zc)
= 29584 * Im(Zc)
Therefore, the closest values for the average power absorbed by impedance Z and the reactive power absorbed by impedance Zc are:
Average power absorbed by impedance Z: 10404 * Re(Z)
Reactive power absorbed by impedance Zc: 29584 * Im(Zc)
To learn more about Impedance, visit:
https://brainly.com/question/30475674
#SPJ11
Explain interesting processes (phenomena) related to chemical
equilibrium (including phase equilibrium) from the viewpoint of
thermodynamics. Please write the process as clear as possible
Thermodynamics is a branch of physics that deals with the relationships between different types of energy and how they affect matter. Chemical equilibrium is a phenomenon that occurs when the rates of the forward and backward reactions are equal, meaning that there is no net change in the concentrations of the reactants and products over time.
There are several interesting processes related to chemical equilibrium from the viewpoint of thermodynamics, including phase equilibrium.
One interesting process related to chemical equilibrium is Le Chatelier's principle. This principle states that if a system at equilibrium is subjected to a stress, the system will adjust in such a way as to partially offset the effect of the stress and restore the equilibrium. For example, if a system is at equilibrium between a solid and a gas, and the pressure is increased, the system will shift towards the side with fewer moles of gas to decrease the pressure.
Another interesting process related to chemical equilibrium is the common ion effect. This effect occurs when the addition of an ion that is already present in the system causes the equilibrium to shift in the opposite direction. For example, if an acid is dissolved in water and the pH is lowered, the addition of more acid will cause the equilibrium to shift towards the side with less acid, causing the pH to increase.
In conclusion, chemical equilibrium is an important phenomenon in thermodynamics, and there are several interesting processes related to it, including Le Chatelier's principle and the common ion effect. These processes help us understand how systems at equilibrium respond to changes in their environment, and they have many practical applications in fields such as chemistry and engineering.
To know more about equilibrium visit:
https://brainly.com/question/12977920
#SPJ11
calculate the DC value of the wave in the picture. Calculate the RMS of the wave if I1=1 A, 12=3 A, T=1 s and d1=800 ms. Enter the numeric only without the unit. 12₂ 1₁. 0 4 t d₂ di"
The DC value of the wave in the picture is 1.0 A. The RMS value of the waveform is 2.6, without any units.
The DC value of a wave refers to its average value over time. In the given context, the picture represents a waveform. The DC value represents the average amplitude or current level of the waveform when it is not varying with time.
From the information provided, the DC value is given as 1.0 A.
Regarding the second part of the question, the root mean square (RMS) value of a waveform represents the effective or equivalent value of the waveform's amplitude. To calculate the RMS value, we need to use the formula:
RMS = (I₁² * d₂ + I₂² * d₁) / T
where I₁ and I₂ are the currents (1 A and 3 A, respectively), d₁ and d₂ are the durations (800 ms and 200 ms, respectively), and T is the time period (1 s).
Substituting the given values into the formula:
RMS = (1 A² * 200 ms + 3 A² * 800 ms) / 1 s
Converting the durations to seconds:
RMS = (1 A² * 0.2 s + 3 A² * 0.8 s) / 1 s
Simplifying:
RMS = (0.2 A² + 2.4 A²) / 1 s
RMS = 2.6 A² / 1 s
Therefore, the RMS value of the waveform is 2.6, without any units (since we only have numerical values).
To know more about RMS value click here:
https://brainly.com/question/30330230
#SPJ11
What focal length (in meters) would you use if you intend to focus a 1.06 mm diameter laser beam to a 10.0μm diameter spot 20.0 cm behind the lens? (Type in three significant digits).
To focus a 1.06 mm diameter laser beam to a 10.0 μm diameter spot 20.0 cm behind the lens, a focal length of approximately 7.44 meters would be required.
The relationship between the diameter of the beam, the diameter of the spot, the focal length, and the distance behind the lens can be determined using the formula for Gaussian beam optics. According to this formula, the spot size (S) is given by [tex]S = \frac{\lambda*f}{\pi* w}[/tex] where λ is the wavelength, f is the focal length, and w is the beam waist radius.
In this case, the beam diameter is given as 1.06 mm, which corresponds to a beam waist radius of half that value, i.e., 0.53 mm or 5.3 x [tex]10^{-4}[/tex] meters. The spot diameter is given as 10.0 μm, which is equivalent to a beam waist radius of 5 x [tex]10^{-6}[/tex] meters. The distance behind the lens is 20.0 cm, which is 0.2 meters.
Using the formula, we can rearrange it to solve for the focal length: [tex]f = \frac{S*\pi* w}{\lambda}[/tex]. Substituting the given values, we have f = (10.0 x [tex]10^{-6}[/tex]) * π * (5.3 x [tex]10^{-4}[/tex]) / (1.06 x [tex]10^{-3}[/tex]) = 7.44 meters (rounded to three significant digits). Therefore, a focal length of approximately 7.44 meters would be needed to achieve the desired focusing of the laser beam.
Learn more about laser here:
https://brainly.com/question/27853311
#SPJ11
A pipe open at both ends has a fundamental frequency of 240 Hz when the temperature is 0 ∘
C. (a) What is the length of the pipe? m (b) What is the fundamental frequency at a temperature of 30 ∘
C ? Hz
For a pipe open at both ends, the fundamental frequency can be used to determine the length of the pipe. At a temperature of 0°C, the fundamental frequency is 240 Hz. Therefore, the fundamental frequency at 30°C is 251.36 Hz.
In a pipe open at both ends, the fundamental frequency is given by the equation f = (nv) / (2L), where f is the frequency, n is the harmonic number (in this case, n = 1 for the fundamental frequency), v is the speed of sound, and L is the length of the pipe.
At a temperature of 0°C, we can assume that the speed of sound is v_0. Using the given fundamental frequency of 240 Hz, we can rearrange the equation to solve for L:
[tex]L = (nv_0) / (2f) = (1 * v_0) / (2 * 240) = v_0 / 480[/tex]
To find the fundamental frequency at a temperature of 30°C, we need to account for the change in speed of sound with temperature. The speed of sound at a given temperature can be approximated using the equation [tex]v = v_0 * \sqrt{(T / T_0)},[/tex] where v is the speed of sound at the new temperature, T is the new temperature in Kelvin, and T_0 is the reference temperature in Kelvin.
Using this equation, we can find the speed of sound at 30°C, and then substitute it into the equation for the fundamental frequency to calculate the new frequency. Therefore, the fundamental frequency at 30°C is 251.36 Hz.
Learn more about fundamental frequency here:
https://brainly.com/question/31314205
#SPJ11
Estimate the temperature required to saturate a J=1/2 paramagnet in a 5 Tesla magnetic field.
The estimated temperature required to saturate the J=1/2 paramagnet in a 5 Tesla magnetic field is approximately 1 Kelvin.
To estimate the temperature required to saturate a J=1/2 paramagnet in a 5 Tesla magnetic field, we can use the Curie's law. Curie's law states that the magnetic susceptibility (χ) of a paramagnetic material is inversely proportional to the temperature (T) and directly proportional to the applied magnetic field (B). Mathematically, it can be expressed as:
χ = C / (T - θ)
Where χ is the magnetic susceptibility, C is the Curie constant, T is the temperature in Kelvin, and θ is the Curie temperature.
In the case of a J=1/2 paramagnet, the Curie constant C is given by:
C = (gJ × (gJ + 1) × μB^2) / (3 × kB)
Where gJ is the Landé g-factor, μB is the Bohr magneton, and kB is the Boltzmann constant.
Assuming the Landé g-factor for a J=1/2 system is 2 and using the values for μB and kB, we can calculate the Curie constant C.
C = (2 × (2 + 1) × (9.274 x 10^-24 J/T)) / (3 × 1.3806 x 10^-23 J/K) ≈ 1.362 x 10^-3 K/T
Now, let's rearrange the equation for χ to solve for temperature:
T = χ + θ
Since we want to determine the temperature required to saturate the paramagnet, we can set χ equal to its maximum value of 1. Then,
T = 1 + θ
Since the material is saturated, the susceptibility χ becomes 1. The Curie temperature θ is the temperature at which the paramagnet loses its magnetization, but since we are assuming saturation, we can neglect it.
Therefore, the estimated temperature required to saturate the J=1/2 paramagnet in a 5 Tesla magnetic field is approximately 1 Kelvin.
Learn more about magnetic field here:
https://brainly.com/question/19542022
#SPJ11
A coordinate system (in meters) is constructed on the surface of a pool table, and three objects are placed on the table as follows: a m 1
=1.8−kg object at the origin of the coordinate system, a m 2
=3.3−kg object at (0,2.0), and a m 3
=5.1−kg object at (4.0,0). Find the resultant gravitational forcee exerted by the other two objects on the object at the origin. magnitude direction Need Help?
To find the resultant gravitational force exerted by the other two objects on the object at the origin of the coordinate system, we need to calculate the individual gravitational forces between each pair of objects and then find the vector sum of these forces.
The gravitational force between two objects can be calculated using the formula F = G * (m1 * m2) / r^2, where F is the gravitational force, G is the gravitational constant, m1, and m2 are the masses of the two objects, and r is the distance between them.
In this case, we have three objects: m1 = 1.8 kg at the origin, m2 = 3.3 kg at (0,2.0), and m3 = 5.1 kg at (4.0,0). To find the resultant gravitational force on m1, we need to calculate the gravitational forces between m1 and m2, and between m1 and m3, and then find the vector sum of these forces.
Using the formula mentioned above, we can calculate the magnitude and direction of each gravitational force. To find the resultant force, we add the vector components of the forces and determine the magnitude and direction of the resultant force.
Learn more about gravitational forces here:
https://brainly.com/question/32609171
#SPJ11
For a driven series RLC circuit, the voltage amplitude V 0
and frequency f of the voltage generator are 103 V and 223 Hz, respectively. The circuit has resistance R=409Ω, inductance L=0.310H, and capacitance C=6.27μF. Determine the average power P avg
dissipated across the resistor. P avg
=
The average power dissipated across the resistor in the given driven series RLC circuit is approximately 120.49 Watts. The average power dissipated across the resistor in a driven series RLC circuit can be calculated using the formula:
[tex]P_avg = (1/2) × V_0^2[/tex] × cos(φ) / R
where [tex]V_0[/tex] is the voltage amplitude, φ is the phase angle between the voltage and current, and R is the resistance of the circuit.
To find the average power, we need to determine the phase angle φ. The phase angle can be calculated using the formula:
tan(φ) = (ωL - 1/(ωC)) / R
where ω is the angular frequency and is equal to 2πf.
Given:
[tex]V_0[/tex] = 103 V
f = 223 Hz
R = 409 Ω
L = 0.310 H
C = 6.27 μF
First, we calculate the angular frequency ω:
ω = 2πf = 2π × 223 Hz = 1401.6 rad/s
Next, we calculate the phase angle φ:
tan(φ) = (ωL - 1/(ωC)) / R
tan(φ) = (1401.6 rad/s × 0.310 H - 1/(1401.6 rad/s × 6.27 × 10^(-6) F)) / 409 Ω
tan(φ) ≈ 0.535
Taking the arctan of both sides, we find:
φ ≈ 28.44 degrees
Now, we can calculate the average power [tex]P_{avg[/tex]:
[tex]P_{avg[/tex] = (1/2) × [tex]V_0^2[/tex] × cos(φ) / R
[tex]P_{avg[/tex] = (1/2) × [tex](103 V)^2[/tex] × cos(28.44 degrees) / 409 Ω
[tex]P_{avg[/tex] ≈ 120.49 W
Therefore, the average power dissipated across the resistor in the given driven series RLC circuit is approximately 120.49 Watts.
Learn more about power here:
https://brainly.com/question/28446845
#SPJ11
A helium-filled balloon escapes a child's hand at sea level and 22.1°C. When it reaches an altitude of 3600 m, where the temperature is 4.6°C and the pressure is only 0.72 atm, how will its volume compare to that at sea level? Express your answer using two significant figures.
The volume of the helium-filled balloon at an altitude of 3600 m is approximately 1.41 times the volume at sea level.
To determine how the volume of the helium-filled balloon at an altitude of 3600 m compares to its volume at sea level, we can use the ideal gas law. The ideal gas law states:
PV = nRT
where:
P is the pressure,
V is the volume,
n is the number of moles of gas,
R is the ideal gas constant, and
T is the temperature in Kelvin.
To compare the volumes, we can write the ideal gas law equation for the balloon at sea level (subscript "1") and at an altitude of 3600 m (subscript "2"):
P₁V₁ = n₁RT₁
P₂V₂ = n₂RT₂
The number of moles and the gas constant are the same for both equations, so we can equate them:
P₁V₁/T₁ = P₂V₂/T₂
We want to compare the volumes, so we can rearrange the equation as:
V₂/V₁ = (P₁/P₂) * (T₂/T₁)
Given:
P₁ = 1 atm
T₁ = 22.1°C = 22.1 + 273.15 = 295.25 K
P₂ = 0.72 atm
T₂ = 4.6°C = 4.6 + 273.15 = 277.75 K
Substituting these values into the equation, we can solve for V₂/V₁:
V₂/V₁ = (1 atm / 0.72 atm) * (277.75 K / 295.25 K)
Calculating the right-hand side of the equation, we find:
V₂/V₁ ≈ 1.41
To know more about helium-filled balloon
https://brainly.com/question/31859232
#SPJ11
A shell is shot with an initial velocity v
0
of 13 m/s, at an angle of θ 0
=63 ∘
with the horizontal. At the top of the trajectory, the shell explodes into two fragments of equal mass (see the figure). One fragment, whose speed immediately after the explosion is zero, falls vertically. How far from the gun does the other fragment land, assuming that the terrain is level and that air drag is negligible? Number Units The figure shows an arrangement with an air track, in which a cart is connected by a cord to a hanging block. The cart has mass m 1
= 0.640 kg, and its center is initially at xy coordinates (−0.480 m,0 m); the block has mass m 2
=0.220 kg, and its center is initially at xy coordinates (0,−0.250 m). The mass of the cord and pulley are negligible. The cart is released from rest, and both cart and block move until the cart hits the pulley. The friction between the cart and the air track and between the pulley and its axle is negligible. (a) In unitvector notation, what is the acceleration of the center of mass of the cart-block system? (b) What is the velocity of the com as a function of time t, in unit-vector notation? (a) ( i- j) (b) ( i j)t The figure gives an overhead view of the path taken by a 0.162 kg cue ball as it bounces from a rail of a pool table. The ball's initial speed is 1.96 m/s, and the angle θ 1
is 59.3 ∘
. The bounce reverses the y component of the ball's velocity but does not alter the x component. What are (a) angle θ 2
and (b) the magnitude of the change in the ball's linear momentum? (The fact that the ball rolls is irrelevant to the problem.) (a) Number Units (b) Number Units A 5.0 kg toy car can move along an x axis. The figure gives F x
of the force acting on the car, which begins at rest at time t=0. The scale on the F x
axis is set by F xs
=6.0 N. In unit-vector notation, what is P
at (a)t=8.0 s and (b)t=5.0 s,(c) what is v
at t=3.0 s ?
The other fragment lands at a distance of 11.04 m from the gun.
It is required to calculate how far from the gun the other fragment land assuming that the terrain is level and that air drag is negligible.
Let's solve the given problem. Using the concept of projectile motion, the time of flight can be calculated which is given by
t = 2v₀sinθ/g, Wherev₀ = 13 m/s, θ = 63° and g = 9.8 m/s²
Substituting the given values, we get
t = 2(13)sin63°/9.8t = 1.837 s
After the explosion, let the horizontal range of one of the fragments be x. Now, this range can be calculated by using horizontal projectile motion, which is given by
x = v₀cosθt, Wherev₀ = 13 m/s, θ = 63° and t = 1.837 s
Substituting the given values, we get
x = 13cos63° × 1.837x = 11.04 m
Thus, the other fragment lands at a distance of 11.04 m from the gun.
To learn about projectile motion here:
https://brainly.com/question/10680035
#SPJ11
A moving particle encounters an external electric field that decreases its kinetic energy from 9320 eV to 6600 eV as the particle moves from position A to position B. The electric potential at A is -65.0 V, and that at B is +15.0 V. Determine the charge of the particle. Include the algebraic sign (+ or -) with your answer.
A moving particle encounters an external electric field that decreases its kinetic energy from 9320 eV to 6600 eV as the particle moves from position A to position B. The electric potential at A is -65.0 V, and that at B is +15.0 V.
We need to determine the charge of the particle.
The work done on the charged particle as it moves from point A to point B is
W = q (Vb - Va)
As the charged particle moves from point A to point B, the potential difference is,
Vb - Va = (+15 V) - (-65 V) = 80 V
Work done on the charged particle, W is,
W = q (Vb - Va) = (1.6 × 10^-19 C) × (80 V) = 1.28 × 10^-17 J
Kinetic energy of the charged particle at position A is,
KEA = 9320 eV = 1.495 × 10^-15 J
And the kinetic energy of the charged particle at position B is,
KEB = 6600 eV = 1.061 × 10^-15 J
The loss of kinetic energy of the charged particle from position A to position B is
W = KEA - KEB1.28 × 10^-17 J = (1.495 × 10^-15 J) - (1.061 × 10^-15 J)1.28 × 10^-17 J = 0.434 × 10^-15 J
Therefore, charge of the particle is,
q = W / (Vb - Va) = 1.28 × 10^-17 C / 80 V = 1.6 × 10^-19 C
As work done on the charged particle is negative, the algebraic sign of charge is also negative. Therefore, the charge of the particle is -1.6 × 10^-19 C.
Learn more about electric field here: https://brainly.com/question/19878202
#SPJ11
An idealized (R=0) LC circuit has an inductor of inductance 25.0H and a capacitor of capacitance 220μF connected in series. What is the LC circuit's period of oscillations? A. 466 s B. 0.047 s C. 4.66 s D. 0.466 s
The LC circuit's period of oscillations is option D is correct.
An idealized LC circuit has an inductor of inductance 25.0H and a capacitor of capacitance 220μF connected in series. To find the LC circuit's period of oscillations, we will use the formula below:T = 2π√(LC)Where;L = InductanceC = Capacitance.The inductance L = 25 HCapacitance C = 220μF = 220 x 10⁻⁶ F.
Now we can substitute the value of L and C in the above formula:T = 2π√(LC)T = 2π√(25 x 220 x 10⁻⁶)T = 2π√(5.5 x 10⁻³)T = 2π x 0.074T = 0.466s.
Therefore, the period of oscillations in an idealized LC circuit with an inductor of inductance 25.0H and a capacitor of capacitance 220μF connected in series is 0.466s. Hence, option D is correct.
Learn more about oscillations here,
https://brainly.com/question/12622728
#SPJ11
Plasma Oscillation*& Consider a slab of metal of thickness d in the â di- rection (and arbitrary area perpendicular to this). If the electron density in the metal is displaced in the +î direction, charge builds up on the bound- ary of the slab, and an electric field results in the slab (like in a plate capacitor). The electrons in the metal respond to the electric field and are back to their original position. This restoring force (like a Hooke's law spring) results in oscillations of electron density, known as a plasma oscillation. (a)* Assume the metal is very clean. Use the finite frequency Drude conductivity in zero magnetic field (see Exercise 3.1.e with B set to zero) and calculate the plasma frequency of the metal. b (b)** Consider the case where the scattering time T is not infinite. What happens to the plasma fre- quency? How do you interpret this? (c)** Set the scattering time to oo again, but let the magnetic field be nonzero. What happens to the plasma frequency now?
(a) Therefore,ωp = (ne2/mτ)1/2. (b)The relaxation time τ is proportional to the scattering time T, so a finite T means a finite τ. This leads to a decrease in the plasma frequency.(c) The details of this effect depend on the specific geometry of the system and the strength of the magnetic field.
(a) The plasma frequency can be calculated using the finite frequency Drude conductivity in zero magnetic field.
Here is how it can be done: Assuming that the metal is very clean, the conductivity is given byσ = n e2τ/m(1 − j2ωτ) where n is the density of electrons in the metal, e is the electron charge, m is the electron mass, τ is the relaxation time, j is the imaginary unit, and ω is the frequency of the oscillation.
In order to find the plasma frequency, we need to find the frequency at which the real part of the conductivity becomes zero.
This givesj2ω2τ2 + 1 = j2ω2pτwhereωp = (ne2/m)1/2is the plasma frequency.
Therefore,ωp = (ne2/mτ)1/2.
(b) If the scattering time T is not infinite, then the plasma frequency will be lower.
This is because the relaxation time τ is proportional to the scattering time T, so a finite T means a finite τ. This leads to a decrease in the plasma frequency.
Physically, this means that the electrons do not respond as quickly to the electric field because they are being scattered, which leads to a slower oscillation.
(c) If the magnetic field is nonzero, then the plasma frequency will depend on the direction of the field.
In general, the plasma frequency will be different for different directions of the magnetic field.
This is because the magnetic field affects the motion of the electrons, which in turn affects the plasma frequency.
The details of this effect depend on the specific geometry of the system and the strength of the magnetic field.
Learn more about magnetic field here:
https://brainly.com/question/19542022
#SPJ11
A 82.76 microC charge is fixed at the origin. How much work would be required to place a 14.48 microC charge 5.97 cm from this charge ?
A 82.76 microC charge is fixed at the origin. the work required to place the 14.48 microC charge 5.97 cm from the fixed charge is approximately [tex]2.14 * 10^{-6}[/tex] Joules.
To calculate the work required to place a charge at a certain distance from another fixed charge, we can use the formula for electric potential energy.
The formula for electric potential energy (U) between two point charges is given by:
U = (k * q1 * q2) / r
Where U is the potential energy, k is the electrostatic constant (9 x 10^9 Nm²/C²), q1 and q2 are the magnitudes of the charges, and r is the distance between the charges.
In this case, the charge fixed at the origin is 82.76 microC and the charge being placed is 14.48 microC. The distance between them is 5.97 cm.
Converting microC to C and cm to meters:
q1 = 82.76 x 10^(-6) C
q2 = 14.48 x 10^(-6) C
r = 5.97 x 10^(-2) m
Plugging in the values into the formula:
U = ([tex]9 * 10^9[/tex] Nm²/C²) * ([tex]82.76 * 10^(-6)[/tex] C) * ([tex]14.48 * 10^{-6} C)[/tex] / ([tex]5.97 * 10^{2}[/tex]m)
Simplifying the equation:
U ≈ [tex]2.14 * 10^{-6}[/tex] J
Therefore, the work required to place the 14.48 microC charge 5.97 cm from the fixed charge is approximately [tex]2.14 * 10^{-6}[/tex] Joules.
Learn more aboutfor electric potential energy here:
https://brainly.com/question/28444459
#SPJ11
A 20 g ball of clay traveling east at 20 m/s collides with a 30 g ball of clay traveling 30" south of west at 1.0 m/s Problem 9.30 Part A The moon's mass is 7.4 x 10 kg and it orbits 3.8 x 10 m from the earth What is the angular momentum of the moon wound the earth? Express your answer using two significant figures
The angular momentum of the moon around the Earth is approximately 2.812 x [tex]10^{31[/tex]kg·m²/s
To calculate the angular momentum of the moon around the Earth, we can use the formula:
L = mvr
Where:
L is the angular momentum
m is the mass of the moon
v is the velocity of the moon
r is the distance between the moon and the Earth
Given:
Mass of the moon (m) = 7.4 x [tex]10^{22[/tex]kg
Distance between the moon and the Earth (r) = 3.8 x [tex]10^8[/tex] m
We need to determine the velocity (v) of the moon. The velocity of an object in circular motion can be calculated using the formula:
v = ωr
Where:
v is the velocity
ω is the angular velocity
r is the distance from the center of rotation
The angular velocity (ω) can be calculated using the formula:
ω = 2πf
Where:
ω is the angular velocity
π is the mathematical constant pi (approximately 3.14159)
f is the frequency of rotation
The frequency of rotation can be calculated using the formula:
f = 1 / T
Where:
f is the frequency
T is the period of rotation
The period of rotation (T) can be calculated using the formula:
T = 2π / v
Now, let's calculate the angular momentum (L):
v = ωr
= (2πf)r
= (2π * (1/T))r
= (2π * (1 / (2π / v)))r
= v * r
L = mvr
= (7.4 x [tex]10^{22[/tex] kg)(v)(3.8 x[tex]10^{8[/tex] m)
Now, let's calculate the angular momentum using the given values:
L = (7.4 x [tex]10^{22[/tex] kg)(3.8 x[tex]10^{8[/tex] m)
= 2.812 x [tex]10^{31[/tex] kg·m²/s
Therefore, the angular momentum of the moon around the Earth is approximately 2.812 x [tex]10^{31[/tex]kg·m²/s (to two significant figures).und the Earth can be determined using two significant figures.
Learn more about angular momentum here:
https://brainly.com/question/29897173
#SPJ11
A 2.5 mm diamotor copper wire carries a 39 A current uniform across its cross section) Part A Determine the magnetic field at the surface of the wire.
Express your answer using two significant figures. B = _______ T Part B Determine the magnetic field inside the wire, 0.50 mm below the surface Express your answer using two significant figures.
At the surface of the copper wire, the magnetic field strength is approximately 0.0031 Tesla. The magnetic field strength inside the copper wire, at a depth of 0.50 mm below its surface, is approximately 0.0041 Tesla.
Diameter of copper wire = 2.5 mm
Radius of copper wire, r = 1.25 mm
Current flowing through the wire, I = 39 A
Cross-sectional area of the wire, A = πr² = 4.9087 × 10⁻⁶ m²
Part A: The magnetic field at the surface of the wire is given by the formula,
B = μ₀I / 2r, where μ₀ is the magnetic permeability of free space.
μ₀ = 4π × 10⁻⁷ Tm/A
B = (4π × 10⁻⁷ Tm/A)(39 A) / (2 × 1.25 × 10⁻³ m)
B = 3.1 × 10⁻³ T
B = 0.0031 T
Therefore, at the surface of the copper wire, the magnetic field strength is approximately 0.0031 Tesla.
Part B: The magnetic field inside the wire is given by the formula,
B = μ₀I / 2r, where r is the distance from the center of the wire.
Let's substitute the given values in the formula and r = 1.25 × 10⁻³ m - 0.50 × 10⁻³ m = 0.75 × 10⁻³ m.
B = (4π × 10⁻⁷ Tm/A)(39 A) / (2 × 0.75 × 10⁻³ m)
B = 4.1 × 10⁻³ T
B = 0.0041 T
Therefore, the magnetic field strength inside the copper wire, at a depth of 0.50 mm below its surface, is approximately 0.0041 Tesla.
Learn more about magnetic field at: https://brainly.com/question/7645789
#SPJ11
For an LRC circuit, resonance occurs when the impedence of the circuit is purely do to the resistance of the resistor only. True False
In an LRC circuit, resonance occurs when the impedance of the circuit is purely due to the combination of the inductance (L) and capacitance (C), not just the resistance (R) of the resistor. Hence, the given statement is false.
Resonance in an LRC (inductor-resistor-capacitor) circuit occurs when the frequency of the input signal matches the natural frequency of the circuit, resulting in maximum current and minimum impedance. At resonance, the reactive components (inductive and capacitive) cancel each other out, leaving only the resistance in the circuit. However, this does not mean that the impedance is purely due to the resistance of the resistor only.
The impedance of an LRC circuit is given by [tex]Z = \sqrt{(\text{R}^2) + (\text{X}_{L}- X_{C})^2[/tex] where Z represents impedance, R represents resistance, [tex]\text{X}_{\text{L}[/tex] represents inductive reactance, and [tex]\text{X}_{\text{C}[/tex] represents capacitive reactance. At resonance, [tex]\text{X}_{\text{L }} =\ \text{X}_{\text{C}}[/tex], which results in the minimum impedance, but the impedance is still determined by both the resistance and the reactances.
Therefore, in an LRC circuit, resonance occurs when the impedance is minimum and the reactive components cancel each other, but the impedance is not purely due to the resistance of the resistor alone.
Learn more about impedance here:
https://brainly.com/question/30475674
#SPJ11
Design a unity-gain bandpass filter, using a cascade connection, to give a center frequency of 300 Hz and a bandwidth of 1.5 kHz. Use 5 µF capacitors. Specify fel, fe2, RL, and RH. 15.31 Design a parallel bandreject filter with a centre fre- quency of 2000 rad/s, a bandwidth of 5000 rad/s, and a passband gain of 5. Use 0.2 μF capacitors, and specify all resistor values.
A unity-gain bandpass filter can be achieved by cascading a high-pass filter and a low-pass filter. The high-pass filter allows frequencies above the center frequency to pass through, while the low-pass filter allows frequencies below the center frequency to pass through. By cascading them, we can create a bandpass filter.
For this design, we'll use 5 µF capacitors. Let's calculate the resistor values and specify the center frequency (f_c) and bandwidth (B).
From question:
Center frequency (f_c) = 300 Hz
Bandwidth (B) = 1.5 kHz = 1500 Hz
Capacitor value (C) = 5 µF
To calculate the resistor values, we can use the following formulas:
f_c = 1 / (2πRC1)
B = 1 / (2π(RH + RL)C2)
Solving these equations simultaneously, we can find the resistor values. Let's assume RH = RL for simplicity.
1 / (2πRC1) = 300 Hz
1 / (2π(2RH)C2) = 1500 Hz
Simplifying, we get:
RH = RL = 1 / (4πf_cC1)
RH + RL = 2RH = 1 / (2πB C2)
Substituting the given values, we have:
RH = RL = 1 / (4π(300)(5 × 10⁻⁶))
RH + RL = 2RH = 1 / (2π(1500)(5 × 10⁻⁶))
Calculating the values:
RH = RL = 1.33 kΩ (approximately)
2RH = 2.67 kΩ (approximately)
So, the resistor values for the unity-gain bandpass filter are approximately 1.33 kΩ and 2.67 kΩ.
Now let's move on to designing the parallel band-reject filter.
For a parallel band-reject filter, we can use a circuit configuration known as a twin-T network. In this configuration, the resistors and capacitors are arranged in a specific pattern to achieve the desired characteristics.
From question:
Center frequency (f_c) = 2000 rad/s
Bandwidth (B) = 5000 rad/s
Capacitor value (C) = 0.2 μF
To calculate the resistor values, we can use the following formulas for the twin-T network:
f_c = 1 / (2π(R1C1)⁽⁰°⁵⁾(R2C2)⁽⁰°⁵⁾)
B = 1 / (2π(R1C1R2C2)⁽⁰°⁵⁾)
Substituting the given values, we have:
2000 = 1 / (2π(R1(0.2 × 10⁻⁶))^(1/2)(R2(0.2 × 10⁻⁶)⁰°⁵⁾))
5000 = 1 / (2π(R1(0.2 × 10⁻⁶)R2(0.2 × 10⁻⁶))⁰°⁵⁾))
Simplifying, we get:
(R1R2)⁰°⁵⁾ = 1 / (2π(2000)(0.2 × 10⁻⁶))
(R1R2)⁰°⁵⁾ = 1 / (2π(5000)(0.2 × 10⁻⁶))
Taking the square of both sides:
R1R2 = 1 / ((2π(2000)(0.2 × 10⁻⁶))⁰°⁵⁾))
R1R2 = 1 / ((2π(5000)(0.2 × 10^-6))²)
Calculating the values:
R1R2 = 1.585 kΩ² (approximately)
R1R2 = 0.126 kΩ² (approximately)
To find the individual resistor values, we can choose arbitrary resistor values that satisfy the product of R1 and R2.
Let's assume R1 = R2 = 1 kΩ.
Therefore, the resistor values for the parallel band-reject filter are approximately 1 kΩ and 1 kΩ.
To summarize:
Unity-gain bandpass filter:
RH = RL = 1.33 kΩ (approximately)
RL = 2.67 kΩ (approximately)
Parallel band-reject filter:
R1 = R2 = 1 kΩ (approximately)
Please note that these values are approximate and can be rounded to standard resistor values available in the market.
To know more about bandpass filters visit:
https://brainly.com/question/31392874
#SPJ11
if the barometer shown is with pressure 101000 Pa, what would be the height of the mercury column if the density of mercury at the temperature is 13600 kg/m³? (g=9.806 m/s²)
The barometer is a device that is used to measure the atmospheric pressure. It works by balancing the weight of mercury in a tube against the atmospheric pressure, where the height of the mercury column indicates the atmospheric pressure.
1. The pressure (P) in the barometer = 101000 Pa. The density (ρ) of mercury at the given temperature = 13600 kg/m³The acceleration due to gravity (g) = 9.806 m/s².
2. Formula: Pressure (P) = density (ρ) × gravity (g) × height of the mercury column (h)The above equation can be rearranged to solve for the height of the mercury column: h = P/(ρg).
3. Substituting the given values in the formula: h = 101000/(13600 × 9.806) m/h = 0.735 m. Therefore, the height of the mercury column would be 0.735 m.
Learn more about barometer:
https://brainly.com/question/3083348
#SPJ11
An object is placed 23.3 cm to the left of a diverging lens (f = -8.39 cm). A concave mirror (f = 10.2 cm) is placed 23.9 cm to the right of the lens. find the final image distance, measured relative to the mirror.
An object is placed 23.3 cm to the left of a diverging lens (f = -8.39 cm). the final image distance, measured relative to the mirror, is approximately 13.158 cm.
To find the final image distance relative to the mirror, we need to consider the combined effect of the diverging lens and the concave mirror.
Given:
Object distance from the lens, p1 = -23.3 cm (negative sign indicates it is to the left of the lens)
Focal length of the diverging lens, f1 = -8.39 cm (negative sign indicates a diverging lens)
Distance between the lens and the mirror, d = 23.9 cm
Focal length of the concave mirror, f2 = 10.2 cm
We can use the mirror and lens equation to calculate the intermediate image distance relative to the lens, q1:
1/f2 = 1/q1 - 1/d
Substituting the values:
1/10.2 = 1/q1 - 1/23.9
Simplifying the equation:
1/q1 = 1/10.2 + 1/23.9
Now, we need to find the final image distance relative to the mirror, q2. Since the image formed by the lens acts as the object for the mirror, the object distance for the mirror is q1.
Using the mirror equation:
1/f1 = 1/q2 - 1/q1
Substituting the values:
1/-8.39 = 1/q2 - 1/q1
Substituting the value of q1:
1/-8.39 = 1/q2 - 1/(1/10.2 + 1/23.9)
Simplifying the equation:
1/q2 = 1/-8.39 + 1/(1/10.2 + 1/23.9)
Calculating the reciprocal of the right-hand side:
1/q2 = 1/-8.39 + 1/(1/10.2 + 1/23.9)
Simplifying the equation:
1/q2 ≈ 0.119 - 0.043
1/q2 ≈ 0.076
Taking the reciprocal of both sides:
q2 ≈ 13.158 cm
Therefore, the final image distance, measured relative to the mirror, is approximately 13.158 cm.
Learn more about diverging lens here:
https://brainly.com/question/28348284
#SPJ11
Two stars are radiating thermal energy at an identical rate, and both have an emissivity of 1. The radius of the first star is twice as large as the second star. What is the ratio of the temperature of the first star to the temperature of the second star?
The ratio of the temperature of the first star to the temperature of the second star is 4:1
In order to calculate the ratio of the temperature of the first star to the temperature of the second star, we need to use the Stefan-Boltzmann law.
What is the Stefan-Boltzmann law?
The Stefan-Boltzmann law states that the rate of radiation emitted by a black body is proportional to the fourth power of the body's absolute temperature.
What is the formula of Stefan-Boltzmann law?
The formula for Stefan-Boltzmann law is given as:
q = εσT^4
Where,
q = the energy radiated per unit area per unit time.
ε = Emissivity (In this case, it's 1).
σ = Stefan-Boltzmann constant = 5.67 × 10-8 W/m2.K4.
T = Temperature in Kelvin.
Now, let's proceed to solve the problem.
Given,
Emissivity of both stars (ε) = 1
Radius of the first star (r1) = 2r2 (i.e twice as large as the second star)
According to Stefan-Boltzmann law,
q1/q2 = (T1^4/T2^4)
We know that
q1 = q2 , because both the stars radiate thermal energy at the identical rate.
q1/q2 = 1
q1 = εσT1^4A1
q2 = εσT2^4A2
As the area of both stars is not given, we can assume it as same for both the stars.
q1 = q2εσT1^4
A = εσT2^4A
q1/q2
= T1^4/T2^4
= (r1/r2)^2q1/q2
= (r1/r2)^2
= (2r2/r2)^2
= 2^2
= 4
Therefore,
The ratio of the temperature of the first star to the temperature of the second star is 4:1
Answer: 4:1
Learn more about Stefan-Boltzmann law here
https://brainly.com/question/30763196
#SPJ11
What Determine The Maximum Theoretical Efficiency Of A Wind Turbine. Briefly Explain The Reason For This Limit And State The Value Of Maximum Efficiency. Describe Onshore And Offshore Wind Farm Technology. Clearly State Advantages And Disadvantages Of Each Technology. Describe - A: Active Pitch-Control B:
What determine the maximum theoretical efficiency of a wind turbine. Briefly explain the reason for this limit and state the value of maximum efficiency.
Describe onshore and offshore Wind farm technology. Clearly state advantages and disadvantages of each technology.
Describe -
A: Active pitch-control
B: Passive stall-control
C: Active stall-control
The maximum theoretical efficiency of a wind turbine is determined by the Betz limit. The limit is 59.3% (i.e. the maximum theoretical efficiency of a wind turbine can only reach 59.3% of the energy that would be extracted if all the air passing through the turbine blades was captured and converted into energy).
The Betz limit is due to the conservation of mass and momentum of the air as it passes through the blades of the turbine. Any excess energy extracted would cause the air to slow down too much and back up, causing turbulence and reducing the effectiveness of the blades. Therefore, to maximize efficiency, turbines are designed to operate as close as possible to the Betz limit. Onshore wind farm technology involves installing turbines on land, often in areas with strong and consistent wind patterns.
Advantages of onshore wind farms include lower installation and maintenance costs, easier access to the grid, and less impact on marine life. Disadvantages include visual and noise pollution, and potential conflict with land use (e.g. agriculture). Offshore wind farm technology involves installing turbines in bodies of water, often further from shore in deeper waters. Advantages of offshore wind farms include stronger and more consistent wind patterns, less visual and noise pollution, and more potential for expansion.
Disadvantages include higher installation and maintenance costs, limited access to the grid, and potential impact on marine life.
A. Active pitch control involves adjusting the angle of the turbine blades to optimize the amount of energy extracted from the wind. This can improve the efficiency of the turbine, especially in variable wind conditions.
B. Passive stall-control involves allowing the blade to stall (i.e. lose lift) at high wind speeds, reducing the amount of energy extracted from the wind to prevent damage to the turbine. This can limit the efficiency of the turbine, especially in low wind conditions.
C. Active stall-control involves adjusting the pitch angle of the blade to stall the blade at high wind speeds, similar to passive stall control, but with more control over the stall point. This can improve the efficiency of the turbine, especially in variable wind conditions.
know more about Active pitch control
https://brainly.com/question/30547641
#SPJ11
Orientation of two limbs of a fold is determined as:
30/70SE and 350/45NW
4. Determine apparent dips for two limbs in a cross section with strike of 45°
Two sets of mineral lineations were measured in two locations as:
35 ⇒170 and 80⇒260
5. Determine orientation of the plane containing these lineations
6. Determine angle between two sets of lineations
Orientation of two limbs of a foldThe orientation of two limbs of a fold is determined as 30/70SE and 350/45NW.
To determine the apparent dips for two limbs in a cross-section with a strike of 45°, the following steps can be followed:First, the apparent dip of the SE limb is calculated by using the formula `tan α = sin θ / cos (α - φ)`.Here, θ = 70°, α = 45°, and φ = 30°So, `tan α = sin θ / cos (α - φ) = sin 70° / cos (45° - 30°) = 2.7475`.The apparent dip is tan⁻¹ (2.7475) = 70.5°.Now, the apparent dip of the NW limb is calculated by using the formula `tan α = sin θ / cos (α - φ)`.Here, θ = 45°, α = 45°, and φ = 10°So, `tan α = sin θ / cos (α - φ) = sin 45° / cos (45° - 10°) = 1.366`.The apparent dip is tan⁻¹ (1.366) = 54.9°.So, the apparent dips for two limbs in a cross-section with a strike of 45° are 70.5° and 54.9°.To determine the orientation of the plane containing these
lineations
, the strike and dip of the plane should be determined from the two lineations. The strike is obtained by averaging the strikes of the two lineations, i.e., (170° + 260°) / 2 = 215°.The dip is obtained by taking the average of the angles between the two lineations and the
plane
perpendicular to the strike line. Here, the two angles are 35° and 10°. So, the dip is (35° + 10°) / 2 = 22.5°.Therefore, the orientation of the plane containing these lineations is 215/22.5.To determine the
angle
between two sets of lineations, the formula `cos θ = (cos α₁ cos α₂) + (sin α₁ sin α₂ cos (φ₁ - φ₂))` can be used.Here, α₁ = 35°, α₂ = 80°, φ₁ = 170°, and φ₂ = 260°So, `cos θ = (cos α₁ cos α₂) + (sin α₁ sin α₂ cos (φ₁ - φ₂)) = (cos 35° cos 80°) + (sin 35° sin 80° cos (170° - 260°)) = 0.098`.Therefore, the angle between two sets of lineations is θ = cos⁻¹ (0.098) = 83.7° (approx).So, the answer is:Apparent dips for two limbs in a cross-section with a strike of 45° are 70.5° and 54.9°.The
orientation
of the plane containing these lineations is 215/22.5.The angle between two sets of lineations is 83.7° (approx).
Learn more about
lineations
https://brainly.com/question/18556538
#SPJ11
1. The apparent dip for the first limb is 25°SE, and for the second limb is 0°NW.
2. The orientation of the plane containing the lineations is 57.5°⇒215°.
3. The angle between the two sets of lineations is 45°.
1. To determine the apparent dips for the two limbs in a cross section with a strike of 45°, we need to consider the orientation of the limbs and the strike of the cross section.
The given orientations are 30/70SE and 350/45NW. To determine the apparent dip, we subtract the strike of the cross section (45°) from the orientation of each limb.
For the first limb with an orientation of 30/70SE, the apparent dip is calculated as follows:
Apparent Dip = Orientation - Strike
Apparent Dip = 70 - 45
Apparent Dip = 25°SE
For the second limb with an orientation of 350/45NW, the apparent dip is calculated as follows:
Apparent Dip = Orientation - Strike
Apparent Dip = 45 - 45
Apparent Dip = 0°NW
2. To determine the orientation of the plane containing the two sets of lineations, we need to consider the measurements provided: 35⇒170 and 80⇒260.
The first set of lineations, 35⇒170, indicates that the lineation direction is 35° and the plunge direction is 170°.
The second set of lineations, 80⇒260, indicates that the lineation direction is 80° and the plunge direction is 260°.
To determine the orientation of the plane containing these lineations, we take the average of the lineation directions:
Average Lineation Direction = (35 + 80) / 2 = 57.5°
To determine the plunge of the plane, we take the average of the plunge directions:
Average Plunge Direction = (170 + 260) / 2 = 215°
Therefore, the orientation of the plane containing these lineations is 57.5°⇒215°.
3. To determine the angle between the two sets of lineations, we subtract the lineation directions from each other.
Angle between lineations = Lineation direction of second set - Lineation direction of first set
Angle between lineations = 80 - 35
Angle between lineations = 45°.
Therefore, the angle between the two sets of lineations is 45°.
Learn more about apparent dip
https://brainly.com/question/34068978
#SPJ11
A toy car that is 0.12 m long is used to model the actions of an actual car that is 6 m long.
A toy car that is 0.12 m long is used to model the actions of an actual car that is 6 m long. So, The acceleration of the actual car is 1515.15 m/s².
The solution to this question can be achieved through the use of the equation: F = ma Where F is force, m is mass, and a is acceleration.
Step 1: Calculating the mass of the toy car using the ratio of lengths m1/m2 = l1/l2, where m1 and m2 are the masses of the toy car and actual car, and l1 and l2 are their respective lengths.
Rearranging, we have:m1 = (l1/l2)m2 = (0.12 m)/(6 m) m2 = 0.02 m2
Step 2: Using the equation, F = ma, we can determine the mass of the toy car: F = ma2 N = (0.02 m2) a a = 2 N / 0.02 m2 = 100 m/s²
Step 3: Using the same force of 5 N, the acceleration of the actual car can be calculated:F = ma5 N = ma m = m2/l2 m = 0.02 m2 / 6 m = 0.0033 kg a = F/m a = 5 N / 0.0033 kg = 1515.15 m/s²
Therefore, the acceleration of the actual car is 1515.15 m/s².
For more questions on acceleration
https://brainly.com/question/460763
#SPJ8
The probable question may be:
A toy car that is 0.12 m long is used to model the actions of an actual car that is 6 m long. The toy car is pushed with a force of 5 N, causing it to accelerate at a rate of 2 m/s². Assuming the same force is applied to the actual car, calculate the acceleration of the actual car.
What is the intensity level of a sound whose intensity is 2.06E-6 W/m²?
The intensity level of a sound whose intensity is 2.06 × 10^-6 W/m² is 33.139 dB.
The formula for the intensity level of a sound wave in decibels (dB) is given by,
I = 10 log(I/I₀)
Where
I is the sound wave's intensity
I₀ is the reference intensity, which is the lowest intensity that can be heard by a healthy human ear and is equal to 1.0 × 10^-12 W/m².
The given parameters are:
I = 2.06 × 10^-6 W/m²
I₀ = 1.0 × 10^-12 W/m²
Substituting the values in the above equation, we get,
I = 10 log(I/I₀)
⇒ I = 10 log(2.06 × 10^-6/1.0 × 10^-12)
⇒ I = 10 log(2060)
⇒ I = 10 × 3.3139 = 33.139 dB
The intensity level of a sound whose intensity is 2.06 × 10^-6 W/m² is 33.139 dB.
Learn more about intensity of sound:
https://brainly.com/question/14349601
#SPJ11
The half-life of 131
I is 8.04 days. (a) Convert the half-life to units of seconds. 5 (b) What is the decay constant (in s −1
) for this isotope? s −1
(c) Suppose a sample of 131
I has an activity of 0.460 uCi. What is this activity expressed in the 51 unit of becquerels (Bq)? Bq (d) How many 131
I nuclei are needed in the sample in part (c) to have the activity of 0.460μci ? 131
1 nuclei (e) Now suppose that a new sample of 131
thas an activity of 6.70mCl at a given time. How many half-lives will the sample go through in next 40.2 days? (Enter your answer for the number of half-lives to at least one decimal place., half-lives What is the activity of this sample (in mCl) at the end of 40.2 days?
(a) Half-life is the time taken for half the number of nuclei in a sample of an isotope to decay. The half-life of 131I is 8.04 days. To convert half-life into units of seconds:Half-life = 8.04 days = 8.04 × 24 × 60 × 60 seconds = 693,504 seconds ≈ 150 × 60 × 60 seconds.
(b) The decay constant (λ) of 131I is calculated as follows:λ = 0.693 ÷ t1/2λ = 0.693 ÷ 693504λ = 1 × 10−6 s−1(c) Activity is the rate of decay of a sample. The activity of the sample of 131I is 0.460 μCi. 1 μCi = 37,000 Bq, then 0.460 μCi = 0.460 × 37,000 Bq = 17,020 Bq(d) To calculate the number of 131I nuclei needed in the sample in part (c) to have the activity of 0.460 μCi, use the following equation:Activity = decay constant × number of nucleiN0 = Activity ÷ (decay constant)N0 = 17020 ÷ (1 × 10−6)N0 = 17.02 × 106(e) To calculate the number of half-lives the sample of 131I will go through in the next 40.2 days, use the following equation:t1/2 = (ln2) ÷ λλ = (ln2) ÷ t1/2λ = 0.693 ÷ 8.04λ = 8.61 × 10−2 day−1After 40.2 days, the number of half-lives is:τ = (40.2 days) ÷ (8.04 days/half-life)τ = 5 half-lives.The activity of this sample (in mCi) at the end of 40.2 days can be calculated using the following equation:N = N0 × (1/2)τN = 17.02 × 106 × (1/2)5N = 1.064 × 106The activity of 131I is expressed as:Activity = decay constant × number of nuclei × 37The decay constant (λ) of 131I is calculated as follows:λ = 0.693 ÷ t1/2λ = 0.693 ÷ 693504λ = 1 × 10−6 s−1Activity = 1 × 10−6 × 1.064 × 106 × 37 = 39.2 mCi at the end of 40.2 days.
Learn more on decay here:
brainly.in/question/3672113
#SPJ11