Answers
a) 16.5 moles of H3PO4 would react with 1834.67 grams of Ca(OH)2. b) 5.06 x 1024 molecules of Ca(OH)₂ would produce 1.68 moles of H2O. c) 31.5 liters of Ca₃(PO₄)₂ are present if there are 4.2 moles of water produced.
Describe Moles?A mole is a unit of measurement used in chemistry to express the amount of a substance. It is defined as the amount of a substance that contains the same number of particles (such as atoms, molecules, or ions) as there are atoms in exactly 12 grams of carbon-12. This number is known as Avogadro's number and is approximately 6.022 x 10^23 particles per mole.
a) The balanced chemical equation for the reaction is:
2 H₃PO₄ + 3 Ca(OH)₂ → Ca₃(PO4)₂ + 6 H₂O
According to the equation, 2 moles of H₃PO₄ react with 3 moles of Ca(OH)₂ to produce 1 mole of Ca₃(PO4)₂ and 6 moles of H2O.
Therefore, the number of moles of Ca(OH)₂ required to react with 16.5 moles of H₃PO₄ can be calculated as:
(16.5 mol H₃PO₄) x (3 mol Ca(OH)₂ / 2 mol H₃PO₄) = 24.75 mol Ca(OH)₂
The molar mass of Ca(OH)₂ is 74.09 g/mol. Therefore, the mass of Ca(OH)₂ required can be calculated as:
24.75 mol x 74.09 g/mol = 1834.67 g
Therefore, 16.5 moles of H₃PO₄ would react with 1834.67 grams of Ca(OH)₂.
b) The balanced chemical equation shows that 3 moles of Ca(OH)₂ react to produce 6 moles of H₂O. This means that 1 mole of Ca(OH)₂ produces 2 moles of H₂O.
The number of moles of H₂O produced by 5.06 x 1024 molecules of Ca(OH)₂ can be calculated as:
5.06 x 1024 molecules Ca(OH)₂ x (1 mol Ca(OH)₂ / 6.022 x 1023 molecules) x (2 mol H2O / 1 mol Ca(OH)₂) = 1.68 mol H₂O
Therefore, 5.06 x 1024 molecules of Ca(OH)₂ would produce 1.68 moles of H2O.
c) From the balanced chemical equation, we know that 3 moles of Ca(OH)₂ react to produce 1 mole of Ca₃(PO4)₂ and 6 moles of H₂O. Therefore, the number of moles of Ca₃(PO4)₂ produced can be calculated as:
3 mol Ca(OH)₂ → 1 mol Ca₃(PO4)₂
If 6 moles of H₂O are produced, then the number of moles of Ca₃(PO₄)₂ can be calculated as:
6 mol H₂O x (1 mol Ca₃(PO₄)₂ / 3 mol Ca(OH)₂) = 2 mol Ca₃(PO₄)₂
Therefore, 4.2 moles of water would be produced from 4.2 / 6 x 2 = 1.4 moles of Ca(OH)₂. The volume of 1.4 moles of Ca₃(PO4)₂ can be calculated using the ideal gas law:
PV = nRT
Assuming standard temperature and pressure (STP), where T = 273 K and P = 1 atm, we can calculate the volume (V) of 1.4 moles of Ca₃(PO4)₂ as:
V = nRT/P = (1.4 mol)(0.0821 L·atm/mol·K)(273 K)/(1 atm) = 31.5 L
Therefore, 31.5 liters of Ca₃(PO4)₂ are present if there are 4.2 moles of water produced.
To know more about volume visit:
https://brainly.com/question/22967790
#SPJ1
A) To determine how many grams of calcium hydroxide would react with 16.5 moles of phosphoric acid, we need to use the stoichiometry of the balanced chemical equation.
From the equation, we can see that 2 moles of H3PO4 react with 3 moles of Ca(OH)2. Therefore, 16.5 moles of H3PO4 will react with (16.5/2) x (3/1) = 24.75 moles of Ca(OH)2. The molar mass of Ca(OH)2 is 74.09 g/mol, so 24.75 moles of Ca(OH)2 is equal to 24.75 x 74.09 = 1835.98 grams of Ca(OH)2. Therefore, 16.5 moles of phosphoric acid would react with 1835.98 grams of calcium hydroxide.
B) The chemical equation shows that 3 moles of Ca(OH)2 react with 6 moles of H2O. Therefore, 1 mole of Ca(OH)2 will produce 2 moles of H2O. Avogadro's number tells us that there are 6.022 x 10²³ molecules in one mole of a substance.
Therefore, 5.06 x 10²⁴ molecules of Ca(OH)2 is equal to 5.06 x 10²⁴/6.022 x 10²³ = 8.4 moles of Ca(OH)2. Each mole of Ca(OH)2 will produce 2 moles of H2O, so 8.4 moles of Ca(OH)2 will produce 2 x 8.4 = 16.8 moles of H2O.
C) The balanced chemical equation shows that 3 moles of Ca(OH)2 react with 1 mole of Ca3(PO4)2. Therefore, 24.75 moles of Ca(OH)2 (calculated in part a) will react with (24.75/3) = 8.25 moles of Ca3(PO4)2. According to the chemical equation, 6 moles of H2O are produced for every 3 moles of Ca(OH)2 consumed. Therefore, 24.75 moles of Ca(OH)2 will produce (24.75 x 6)/3 = 49.5 moles of H2O.
We are given that there are 4.2 moles of water present, so using the ratio from the balanced chemical equation, we can determine that there are (8.25/49.5) x 4.2 = 0.7 moles of Ca3(PO4)2. To convert this to liters, we need to use the molar volume of a gas at standard temperature and pressure, which is 22.4 L/mol. Therefore, the volume of Ca3(PO4)2 present is 0.7 x 22.4 = 15.68 L.
To know more about Avogadro's number, visit:
https://brainly.com/question/11907018
#SPJ1
Related Questions
What is another example, in real life, where we can prove that gases exist even though we can not see them? Explain why you believe this is a good example.
Answers
Well, us human being rely on [tex]o_{2}[/tex] (oxygen). We human beings breathe this in every day because we need it to survive. This is a good example because it explains how humans don't see [tex]o_{2}[/tex] but use it every day.
Instead of using an indicator, what other methods would you suggest using in the titration? And which method would provide the most accurate measurement?
Answers
A different approach is to use a pH meter to keep track of the solution's pH while the titrant is introduced. As the titrant is added, the solution's pH changes; the endpoint can be identified when this happens.
Because it gives a more accurate measurement of the endpoint, this method is more accurate than utilizing an indicator.
TitrationA conductivity meter can also be used to gauge the solution's conductivity as the titrant is applied. As the titrant is added, the solution's conductivity varies, and the endpoint can be identified when this change ends.
Although it is less popular, this approach is also more accurate than utilizing an indication.
Overall, the pH meter approach is probably going to give the most accurate reading because it can spot even the smallest pH changes and gives a more exact reading of the endpoint.
However, the particular experiment and the available resources will determine the method to use.
learn more about titration here
https://brainly.com/question/13307013
#SPJ1
calculate the mole fraction of HCl in a 9.8% (by mass) aqueous solution. the density of the solution is 1.03 g/mL
Answers
The mole fraction of HCl in the given solution is 0.051.
What is the mole fraction of the HCL?To calculate the mole fraction of HCl in the given solution, we need to first find the mass of HCl and water present in the solution.
Let's assume we have 100 g of the solution, so 9.8 g of it is HCl, and 90.2 g is water.
Next, we need to find the moles of HCl present in the solution.
To do this, we divide the mass of HCl by its molar mass.
The molar mass of HCl is 36.46 g/mol (1.01 g/mol for hydrogen + 35.45 g/mol for chlorine).
moles of HCl = 9.8 g / 36.46 g/mol = 0.269 mol
The moles of water can be calculated using its molar mass which is 18.015 g/mol.
moles of water = 90.2 g / 18.015 g/mol = 5.005 mol
The total number of moles in the solution is the sum of the moles of HCl and water.
total moles = 0.269 mol + 5.005 mol = 5.274 mol
The mole fraction of HCl can now be calculated by dividing the moles of HCl by the total number of moles.
mole fraction of HCl = 0.269 mol / 5.274 mol = 0.051
Learn more about mole fraction here: https://brainly.com/question/14783710
#SPJ1
A 50.0-mL sample of 0.200 M sodium hydroxide is titrated with 0.200 M nitric acid. Calculate the pH of the solution, after you add a total of 56.2 mL of 0.200 M HNO3
Answers
Answer:
In this case, the acid is 0.200 M HNO3 and the base is 0.200 M nitric acid. To calculate the pH of a 50.0-mL solution, add 58.3 mL of 0.200 M HNO3. The final pH of the solution will be 8.33. To calculate the pH of a 35.0 mL solution, add 36.7 mL of 0.198 M HNO
What is the IUPAC name for the compound shown?
Answers
The IUPAC name of the compound is 3-Ethyl-2,2-dimethylhexane.
IUPAC namingIUPAC naming is a systematic method of naming chemical compounds according to a set of rules established by the International Union of Pure and Applied Chemistry. It ensures that each compound has a unique and unambiguous name based on its molecular structure.
From the image:
The longest chain has 6 carbonThe compound is an alkane, thus, the principal chain is a hexaneThere are 2 methyls (CH3) on the second carbonThere is 1 ethyl (C2H5) on the third carbon.Thus, the IUPAC name of the compound is 3-Ethyl-2,2-dimethylhexane.
More on IUPAC naming can be found here: https://brainly.com/question/30086566
#SPJ1
In the reaction NH3(g) + O2(g) → NO(g) + H₂O(g) How many grams of H₂0 are generated when 1.54 moles of NH3 react?
Answers
Answer: 2.31 mole H2O
Explanation: blance the equation first
4 NH3 + 5O2 --> 4 NO + 6 H20
1.54 moles NH3 x ( 6 mole H20/ 4 moles NH3) X (18 g H20/1mole H20)
2.31 mole H20
Match these
Hypothesis
Independent Variable
Conclusion
Amount of water
if a plant receives more water it will grow more
100mL of water yielded the highest mass and height of plants
Answers
The conclusion is the result of the experiment, which supports the hypothesis by stating that 100mL of water yielded the highest mass and height of plants.
Hypothesis: If a plant receives more water, it will grow more.
Independent Variable: Amount of water.
Conclusion: 100mL of water yielded the highest mass and height of plants.
In this experiment, Hypothesis states the relationship between the independent variable and the dependent variable. The independent variable is the amount of water, and the dependent variable is the growth of the plants.
The conclusion is the result of the experiment, which supports the hypothesis by stating that 100mL of water yielded the highest mass and height of plants.
To know more about water yield, visit:
https://brainly.com/question/16359786
#SPJ1
What must the atoms of products equal in a chemical equation?
O atoms in molecules
O electrons in atoms
O protons in atoms
O atoms of reactants
20pts
Answers
Answer:
D
Explanation:
The pressure of a gas will ? when the volume is decreased and will ? when the absolute temperature is decreased.
Answers
Answer:
Explanation:
Pressure and volume are indirectly related.
Pressure and temperature are directly related.
so first ? is increase
2nd ? is decrease
Which of these is not a sign of a chemical reaction?
1. The material dissolves
2. Heat is released
3. A gas is given off
Answers
A chemical reaction is known by;
2. Heat is released
3. A gas is given off
How do you know a chemical reaction?A change in color may indicate that a chemical reaction has occurred. For example, when iron is exposed to air and moisture, it rusts and turns from silver to reddish-brown.
If a gas is produced during a reaction, it can indicate that a chemical reaction has occurred. For example, when baking soda is mixed with vinegar, carbon dioxide gas is produced, which causes bubbles to form.
Learn more about chemical reaction:https://brainly.com/question/29039149
#SPJ1
pls help
2.0 mol of Ca(OH)2 are mixed with 2.0 mol of HCl according to the following equation:
Ca(OH)2+2HCl=CaCl2+2H2O
a. Which chemical is in excess and which is limiting reactant?
b. What is the excess in grams?
c.Theoretically,how many moles of H20 will be produced?
Answers
Answer:
Explanation:
Limiting is HCl and excess is Ca(OH)2
excess is 296 grams Ca(OH)2
2 moles H2O will be formed
The Kp for the reaction A (g) ⇌ 2 B (g) is 0.0110. What is Kp for the reaction 2 B (g) ⇌ A (g)?
Answers
To goal of the hypothesis is to make an educated guess on what will happen when comparing the viscosity of the paint, honey, and dish soap from most to less viscous (all liquids). What do you think will happen and why. Please provide at least 2 paragraphs that paraphrased background information and research.
Answers
A liquid's viscosity is a measurement of its flow resistance. A liquid's resistance to flow increases with its viscosity. Due to its high density and high molecular weight, honey is regarded as an extremely viscous liquid. Honey has a high viscosity since it is mostly composed of glucose and fructose.
Conversely, paint and dish soap is less viscous because they are not as heavy or dense as honey. The mixture of pigments, solvents, and additives used to make paint gives it a variety of viscosities. Due to its low molecular weight and the presence of surfactants, dish soap often has a low-viscosity liquid.
On the basis of this data, it can be predicted that dish soap will have the lowest viscosity, followed by paint, and then honey. This is true because paint and dish soap have lower molecular weights and are lighter and less dense than honey, which is a viscous, dense liquid with a high molecular weight.
Temperature and pressure have an impact on a liquid's viscosity as well, so it is important to regulate these variables when testing this idea experimentally to assure accuracy. As different brands and formulas might differ in their composition and viscosity, it is also crucial to keep in mind that the type and quality of the paint and dish soap under test may have an impact on the findings of the viscosity test.
learn more about viscosity here
https://brainly.com/question/2568610
#SPJ1
A percent composition analysis yields 52.1% carbon, 13.2% hydrogen, and 34.7% oxygen. What is the empirical formula for the compound?
Answers
O:C:H ratio is 34.8/16/52.2/12/13/0/1 = 2.17/4.35/13/0 = 1:2/6. Hence, C2H6O is the empirical formula (option D).
What purposes does hydrogen serve?Fuel cells may produce heat and energy from hydrogen. Although transportation and utilities are expanding businesses, fertilizer manufacturing and petroleum refining still use hydrogen most frequently today.
Can hydrogen be burned as fuel?According to the 1992 Energy Policy Act, hydrogen qualifies as an alternative fuel. The ability of hydrogen to power fuel cell technology in zero-emission vehicles, the potential for home consumption, and the high efficiency and quick filling time of fuel cells all contribute to the interest in hydrogen as such an alternative transportation fuel.
To know more about Hydrogen visit:
https://brainly.com/question/28937951
#SPJ1
Draw and label a picture of an ozone (O3) molecule (Hint start with an O2 then attach the third O). What type of bond is used to attach the 3rd oxygen atom to the ozone molecule? Explain in words how this bond forms.
Answers
The ozone molecule is composed of three atoms of the oxygen.
What is the structure of the ozone molecule?The ozone molecule (O3) is a triatomic molecule, meaning that it consists of three atoms. It is composed of three oxygen atoms, which are held together by covalent bonds.
The structure of the ozone molecule can be described as a bent or V-shaped molecule, with the three oxygen atoms arranged in a triangular fashion. The central oxygen atom is bonded to two other oxygen atoms, which are located above and below it, with bond angles of approximately 117 degrees.
Learn more about Ozone:https://brainly.com/question/14330630
#SPJ1
According to one acid-base theory, a molecule acts as an acid
when the molecule
(1) accepts an H+
(2) accepts an OH-
(3) donates an H+
(4) donates an OH-
Answers
The Brnsted-Lowry acid-base hypothesis states that when a molecule gives a proton (H+ ion) to another molecule, it behaves as an acid. As a result, the right response is (3) donates an H+.
According to one acid base theory, what is an acid?The Arrhenius theory states that acid is a chemical that causes water to create hydrogen ions. Base is a chemical that causes water to form hydroxide ions.
What underlies acid-base titration's basic premise?A neutralisation reaction takes place during the acid-base titration. Here, the concentration of a particular base or acid is ascertained by neutralisation against an acid or base of known concentration. This kind of titration begins with a drop of an indicator, which changes colour to show the endpoint.
To know more about hydrogen ions visit:-
https://brainly.com/question/7641960
#SPJ1
How many significant figures are in 6.07×10^14
Answers
Answer:3
Explanation: counting from left to right there is 3 sig figs.
Effect of Solvent:
Record the results.
H2O =
alcohol =
glycerin =
In which liquid is the salt most soluble?
Using the concept of `'Like dissolves like," explain why you got the results you did.
Explain how the choice of solvent affects the dissolving process.
Effect of Pulverizing:
Record of dissolving times.
crystal =
pulverized =
Why are the dissolving rates different?
Effect of Temperature:
Record of dissolving times.
cold =
hot
Using the concepts of kinetic energy, describe why you found the results you did.
Effect of Stirring:
Record the times necessary to dissolve each sample.
Record of dissolving time.
stirred =
unstirred =
Perform the experiment again using hot tap water this time. Are there any differences in the results between the cold water experiment and the hot water experiment? Explain.
Conclusions:
Review the four factors of dissolving you have just investigated. Given the correct solvent for a solute, what could you do to hasten the solution process?
1.
2.
3.
Answers
To hasten the solution process, we can choose the correct solvent for the solute, pulverize the solute to increase its surface area, increase the temperature of the solvent.
Effect of Solvent:
H2O = most soluble
alcohol = least soluble
glycerin = intermediate solubility
The salt is most soluble in water because salt is an ionic compound and water is a polar solvent. "Like dissolves like" means that substances with similar polarity and intermolecular forces tend to dissolve each other. Water is a polar solvent, meaning it has a partial positive charge on one end and a partial negative charge on the other, while salt is an ionic compound made up of positively and negatively charged ions. The partial charges on the water molecule can interact with the ions of salt, causing the salt to dissolve.
The choice of solvent affects the dissolving process because it determines the ability of the solvent to interact with the solute. Solvents that are similar in polarity and intermolecular forces to the solute tend to dissolve the solute more easily.
Effect of Pulverizing:
crystal = longest dissolving time
pulverized = shortest dissolving time
The dissolving rates are different because pulverizing the salt increases its surface area, exposing more salt to the solvent and allowing for a greater opportunity for the solute-solvent interactions to occur.
Effect of Temperature:
cold = longest dissolving time
hot = shortest dissolving time
Increasing the temperature of the solvent increases the kinetic energy of the solvent molecules, which leads to more frequent and energetic collisions with the solute particles, resulting in faster dissolving rates.
Effect of Stirring:
stirred = shorter dissolving time
unstirred = longer dissolving time
Stirring increases the rate of the dissolving process by helping to disperse the solute particles evenly throughout the solvent, increasing the surface area of the solute that is in contact with the solvent, and promoting the mixing of the solute and solvent.
Conclusions:
To hasten the solution process, we can choose the correct solvent for the solute, pulverize the solute to increase its surface area, increase the temperature of the solvent, and stir the solution to disperse the solute particles evenly throughout the solvent.
Learn more about solubility here
https://brainly.com/question/28170449
#SPJ1
Does electronegativity increase or decrease when you go across a period on the
periodic table? Does it increase or decrease when you move down a group on the
periodic table?
Answers
Answer:
Explanation:
The element with the highest electronegativity is Flourine. Its value is 4. Thus it increases across a period.
Its trend is it increases from left to right and up the groups. So it will decrease going down the group.
What is the volume on 13.44g of O2 gas at STP?
Answers
given grams x 1 mol O2 / molar mass of element x conversion / 1.00 mol O2
550.0 mL of air is at 20.0 °C. What is the volume at 60.0 °C?
Answers
At 60.0 °C, the air has a volume of 1650.0 mL.
At constant pressure, the volume of a gas is directly proportional to its temperature.This means that when the temperature increases, the volume of the gas also increases.
At 20.0 °C, the volume of the air is 550.0 mL.
Using the formula [tex]V2 = V1 *\frac{ T2}{T1}[/tex], where the initial volume and temperature are V1 and T1, respectively, and the end volume and temperature are V2 and T2, respectively.
we can calculate the volume of the air at 60.0 °C.
[tex]V2 = 550.0 mL * (\frac{60.0 \°C}{20.0 \°C})[/tex]
V2 = 1650.0 mL
Therefore, the volume of the air at 60.0 °C is 1650.0 mL.
learn more about volume refer:brainly.com/question/24189159
#SPJ1
Convert 675000 to scientific notation
Answers
Answer:
To convert 675000 to scientific notation, we need to express it in the form a × 10^n, where a is a number between 1 and 10 (but not 10 itself), and n is an integer.
Starting with 675000, we can divide by 10 repeatedly until we get a number between 1 and 10.
675000 ÷ 10 = 67500 (one division by 10)
67500 ÷ 10 = 6750 (two divisions by 10)
6750 ÷ 10 = 675 (three divisions by 10)
Now we have a number between 1 and 10 (namely, 6.75), and we know that we divided by 10 three times, so the exponent is -3.
Therefore, we can express 675000 in scientific notation as:
6.75 × 10^5
(Note that we could also express it as 6.75 × 10^2 × 10^3, but this is not in standard scientific notation, which requires the coefficient to be between 1 and 10.)
how many hydrogen atoms are in 2 moles of h2o?
Answers
Answer:
1 mole = 6.022×10^23 atoms. 1 water molecule = 2 Hydrogen atoms + 1 oxygen atom. So, 1 mole H2O = 1.2044×10^24 hydrogen atoms. Therefore 2 mole H2O will have 2.4088×10^24 hydrogen atoms.
Explanation:
The temperature of an object increases by 38.1 °C when it absorbs 3647 J of heat. Calculate the heat capacity of the object.
Answers
The heat capacity of an object is defined as the amount of heat required to raise its temperature by 1 degree Celsius (or 1 Kelvin). It is denoted by the symbol "C" and has units of J/°C (Joules per degree Celsius) or J/K (Joules per Kelvin).
We can use the formula for heat capacity to calculate its value for the object:
[tex]C = \dfrac{Q}{\Delta T}[/tex]where:
Q is the amount of heat absorbed by the object andΔT is the change in temperature of the object.Substituting the given values, we get:
[tex]C = \dfrac{3647 \: J }{ 38.1\: ^{\circ}C}[/tex]Note that the units of temperature must match (either Celsius or Kelvin) in order for the calculation to be correct. Since the given change in temperature is in Celsius, we can use Celsius for the units of heat capacity as well.
Dividing, we get:
[tex]C = 95.8 \: J/^{\circ}C[/tex]Therefore, the heat capacity of the object is 95.8 J/°C. This means that it requires 95.8 Joules of heat to raise the temperature of the object by 1 degree Celsius (or Kelvin).
[tex]\rule{200pt}{5pt}[/tex]
Which intermolecular force is characteristic of compounds with low molar mass that are liquids at room temperature and have relatively high boiling points
Answers
Answer:
Intermolecular Hydrogen Bonding
Explanation:
Once you are able to recognize compounds that can exhibit intermolecular hydrogen bonding, the relatively high boiling points they exhibit become understandable.
Answer:
Hydrogen Bonds
Explanation:
Hydrogen bond are a type chemical bond in which a hydrogen atom that has a covalent link with one of the electronegative atoms (F, N, O) forms an electrostatic link with another electronegative atom in the same or another molecule.
Hydrogen is a colorless, odorless, flammable gas that combines chemically oxygen to form water: the light of the known elements. Symbol: H; atomic weight: 1.00797; atomic number: 1; density: 0.0899 g/l at 0°C and 760 mm pressure.
The forces that exist between molecules in a material are called intermolecular forces. Higher forces and greater difficulty in separating them result from tighter molecules.
Because of this, the forces between solids and liquids are stronger than those between gases, which leads us to the conclusion that the intermolecular force is caused by hydrogen bonds.
What is the percent of O in
Ca(С2H302)2?
(Ca = 40.08 g/mol, C = 12.01 g/mol,
H= 1.01 g/mol, O = 16.00 g/mol)
Answers
40.5%
Explanation:
Ca×1 = 40
C×4 = 48
H×6 = 6
O×4 = 64
64÷158×100% = 40.5%
. An IV solution contains 0.0175% of Drug Z, how much of this IV solution should we infuse, if the patient needs 100 mg of Drug Z?
If this solution is infusing at 50 ml/hr, how long will it take take to complete the infusion? Hint: 1mg = 0.001g or ml.
Answers
The infusion will be finished in 114.286 hours.
We need to infuse 100 mg of Drug Z. Since the IV solution contains 0.0175% of Drug Z, we can calculate the amount of IV solution needed for the infusion.
To do this, we need to use the following formula:
Amount of IV solution = [tex]\frac{(Amount of Drug Z * 100) }{ Concentration of Drug Z}[/tex]
Amount of IV solution = [tex]\frac{(100 mg * 100) }{0.0175 \% }[/tex]
Amount of IV solution = 5,714.286 ml
To calculate how long it will take to complete the infusion, we need to use the following formula:
Time to complete infusion =[tex]\frac{Amount of IV solution }{ Rate of infusion }[/tex]
Time to complete infusion =[tex]\frac{ 5,714.286 ml }{ 50 ml/hr }[/tex]
Time to complete infusion = 114.286 hr
Therefore, it will take 114.286 hours to complete the infusion.
learn more about infusion Refer:brainly.com/question/28790508
#SPJ1
Part 1: How many oxygen atoms are in one mole of the formula Al2(CO3)3?
Part 2: How many moles of carbon are in 3.5 moles of calcium carbonate?
Answers
There are therefore a total of 14 atoms: 2 Al, 3 C, & 9 O. In other words, 3.5 moles of calcium carbonate will contain 3.5 moles if carbon because each mole of calcium carbonate has one mole of carbon.
How is carbon in CaCO3 calculated?Hence, 40.078 divided by 100.086 everything multiplied by 100% represents the mass percentage for calcium in calcium carbonate. This yields a value of almost 40%. Carbon's mass percentage is calculated by taking 12.011 and dividing it by 100.086, then multiplying that result by 100% to get a number of roughly 12 percent.
How many oxygen atoms make up Al2O3?The subscripts (2 and 3) in this formula indicate how so many atoms will make up one unit of the molecule. There are two aluminium atoms and three oxygen atoms, respectively, denoted by the numbers 2 and 3.
To know more about carbonate visit:
https://brainly.com/question/22530423
#SPJ1
how much energy can metals hold?
do different types of metals hold different types of energy?
how to you measure how much energy something has?
Answers
The amount of energy that a metal can hold depends on various factors such as the composition, crystal structure, and temperature of the metal.
Different types of metals can indeed hold different amounts of energy due to their unique properties. For instance, metals like copper and aluminum have high electrical conductivity, making them suitable for use in electrical wires.
The amount of energy that something has is usually measured in joules (J) or electronvolts (eV). The energy content of a metal can be determined by measuring its specific heat capacity, which is the amount of heat energy required to raise the temperature of a given mass of the metal by one degree Celsius.
Another way to measure the energy content of a metal is by analyzing its atomic structure and the energy levels of its electrons.
More on metal's energy can be found here: https://brainly.com/question/29766850
#SPJ1
The acid should be handled with great care why?
Answers
Acids have a strong tendency to corrode. Acid splashing on our flesh can result in severe burns and skin irritation. Therefore, when managing acids, we should exercise caution.
Should one manage strong acids with caution?Although acids and bases are frequently used in a wide range of industrial applications, it's essential to keep in mind that they are hazardous waste and should be handled carefully.
How should laboratory chemicals be handled?When working with concentrated acids or acid solutions, put on chemical splash goggles, chemical-resistant mittens, and a chemical-resistant apron. In a fume cover, work with concentrated acids. In accordance with your requirements, purchase diluted acid solutions. It is safer and simpler to manage, store, and use diluted solutions.
To know more about Acids visit:-
https://brainly.com/question/14072179
#SPJ9