The Unix/Linux commands are used to perform various tasks. The "ls" command displays the detailed information of directories. The "rm" command deletes a write-protected file. The "mv" command moves a file from one directory to another. The "mkdir" command creates new sub-directories.
i. To display detailed information of the directories /var/named, the command is:
ls -al /var/named
This will show a list of files and directories in /var/named with detailed information, including permissions, owner, size, and modification date.
ii. To delete a file myfile.txt that is write protected, the command is:
sudo rm -f myfile.txt
The "sudo" command is used to run the command with superuser privileges, which allows the deletion of a write-protected file. The "-f" option is used to force the deletion of the file without prompting for confirmation.
iii. To move the file named.conf from the directory das to the folder das1, the command is:
mv das/named.conf das1/
The "mv" command is used to move the file from one directory to another. In this case, the named.conf file is moved from the directory das to the folder das1.
iv. To create three new sub-directories (memos, letters, and e-mails) in the parent directory Project, assuming the project directory does not exist, the command is:
mkdir -p ~/Project/memos ~/Project/letters ~/Project/e-mails
The "mkdir" command is used to create new directories. The "-p" option is used to create the parent directory if it does not exist. The "~" symbol is used to refer to the user's home directory.
v. To change to the home directory when in /var/named/chroot/var, the command is:
cd ~
The "cd" command is used to change the current directory. The "~" symbol is used to refer to the user's home directory.
To know more about Unix/Linux commands, visit:
brainly.com/question/32878374
#SPJ11
Let S be a subset of the set of integers defined recursively as follows: Base case: 5 ES Recursive case: If a ES, then 3a E S. we are using Structural Induct Induction to show for all a ES that a = 5k for some k E N. Don't include zero in the natural number set Evaluate if the following steps are correct or not. Type in "Correct" OR "incorrect" (Don't include quotation mark) 1) Baso case: 5 belongs to the set S and 5 is a multiple of 5 because 5 X* *5 (whero k** and 1 is a natural number). (CorrectIncorrect?): 1) Inductive step: assume if ta' belongs to 'S then ask where k is a natural number (CorrectIncorrect?): Proof: 5 is a positive multiple of 5 because 5k * 5 where k=1 and 1 is a natural number (CorrectIncorrect?)
Baso case: 5 belongs to the set S and 5 is a multiple of 5 because 5 X* 5 (whero k* and 1 is a natural number).
Correct
Inductive step: assume if ta' belongs to 'S then ask where k is a natural number
Incorrect. The statement is unclear and contains typographical errors. It should be: "Assume if a belongs to S, then a = 5k for some k in N."
Proof: 5 is a positive multiple of 5 because 5k * 5 where k=1 and 1 is a natural number
Incorrect. The proof is incorrect. It should be: "Assuming a = 5k, we can show that 3a = 5(3k), where 3k is still a natural number. Therefore, if a belongs to S, then 3a also belongs to S, satisfying the recursive case."
Overall, the steps provided are partially correct, but there are errors in the formulation of the inductive step and the proof.
Learn more about set here:
https://brainly.com/question/30705181
#SPJ11
You should not pass Function's local variable as return value by reference
/* Test passing the result (Test PassResultLocal.cpp)
#include
using namespace std;
int squarePtr(int);
int & squareRef (int);
int main() {
int number = 8;
cout << number << endl; // 8
cout << *squarePtr (number) << endl; // ??
cout << squareRef(number) << endl;
int squarePtr(int number) ( int localResult = number⚫ number;
return &localResult;
// warning: address of local variable 'localResult' returned
int & squareRef (int number) (
int localResult number number;
return localResult;
// warning: reference of local variable localResult' returned
The code provided includes two functions, `squarePtr` and `squareRef`, that attempt to return the local variable `localResult` by reference.
However, this is incorrect and can lead to undefined behavior. Returning local variables by reference is not recommended because they are destroyed once the function ends, and accessing them outside the function scope can result in accessing invalid memory. The code should be modified to return the values directly instead of attempting to return them by reference.
In the code, the `squarePtr` function attempts to return the local variable `localResult` by reference using the `&` operator. However, `localResult` is a local variable that will be destroyed once the function ends. Therefore, returning it by reference can lead to accessing invalid memory.
Similarly, the `squareRef` function tries to return `localResult` by reference. However, `localResult` is again a local variable that will go out of scope, resulting in undefined behavior when accessing it outside the function.
To fix the code, the functions should be modified to return the result directly rather than attempting to return it by reference. This ensures that the correct value is returned without any potential issues related to referencing local variables.
Learn more about passing variables by reference in C++ here: brainly.com/question/31803989
#SPJ11
Convert (-5) to its binary notation using 2’s complement
format
Show your full work
To convert -5 to its binary notation using 2's complement format, follow these steps:
Convert the absolute value of the decimal number (5) to binary notation:
5 in binary = 00000101
Invert all the bits in the binary representation:
Inverting 00000101 gives 11111010.
Add 1 to the inverted binary representation:
Adding 1 to 11111010 gives 11111011.
Therefore, -5 in binary using 2's complement format is 11111011.
To verify the result, you can convert the binary representation back to decimal:
If the most significant bit is 1 (which it is in this case), it indicates a negative number.
Invert all the bits in the binary representation (11111011).
Add 1 to the inverted binary representation (00000101).
The resulting decimal value is -5.
Hence, the binary representation 11111011 represents the decimal value -5.
Learn more about binary notation here:
https://brainly.com/question/10374428
#SPJ11
Iterative methods for the solution of linear systems: Trieu-ne una: a. Outperform direct methods for very large and sparse matrices. b. I do not know the answer. c. Are never used, because direct methods are always preferable. d. Typically exhibit very poor convergence and are rarely used.
Iterative methods for the solution of linear systems Outperform direct methods for very large and sparse matrices.
Iterative methods for solving linear systems refer to algorithms that iteratively improve an initial guess towards the exact solution. The options presented are not entirely accurate, except for option a, which states that iterative methods outperform direct methods for very large and sparse matrices. This statement is generally true.
Iterative methods have certain advantages over direct methods when dealing with large and sparse matrices. Sparse matrices contain a significant number of zero entries, and direct methods, such as Gaussian elimination, may become computationally expensive and memory-intensive. In contrast, iterative methods exploit the sparsity of the matrix and only consider non-zero entries, making them more efficient in terms of memory usage and computational time.
Moreover, iterative methods can be parallelized, which is beneficial for large-scale computations and distributed systems. Additionally, they offer the flexibility of trading accuracy for computational efficiency by controlling the number of iterations. However, it is important to note that the convergence behavior of iterative methods can be influenced by the properties of the matrix, including its conditioning and spectral properties. In some cases, certain iterative methods may exhibit slow convergence or fail to converge altogether. Hence, selecting an appropriate iterative method requires considering the specific problem and characteristics of the matrix.
LEARN MORE ABOUT linear systems here: brainly.com/question/29175254
#SPJ11
In an array-based implementation of a Heap
Part B: the left child of the right child of the node at index i, if it exists, can be found at what array location? Why?
The left child of the right child of the node at index i in an array-based implementation of a Heap can be found at index 2i + 3. This calculation is based on the properties of a binary heap and the array representation of the heap.
In a binary heap, each node has at most two children: a left child and a right child. The heap is stored in an array, where the index 0 represents the root node. The left child of a node at index i can be found at index 2i + 1, and the right child can be found at index 2i + 2.
To find the left child of the right child of the node at index i, we first need to find the right child's index. Using the formula above, the right child of the node at index i can be found at index 2i + 2. Then, we can apply the same formula to find the left child of this right child. Plugging in 2i + 2 for i, we get 2(2i + 2) + 1, which simplifies to 4i + 5. However, since we are asked for the array location, we need to subtract 1 from the result to account for the fact that array indices are zero-based. Therefore, the left child of the right child of the node at index i can be found at index 4i + 4.
To learn more about array click here, brainly.com/question/13261246
#SPJ11
In reinforcement learning, the reward:
a. Is positive feedback given to an agent for each action it takes in a given state.
b. Is positive or negative feedback given to an agent for each action it takes in a given state.
c. Is negative feedback given to an agent for each action it takes in a given state. d. All of the above. What is one way that reinforcement learning is different from the other types of machine learning?
a. Reinforcement learning requires labeled training data
b. In reinforcement learning an agent learns from experience and experimentation
c. In reinforcement learning you create a model to train your data
d. Reinforcement learning uses known data to makes predictions about new data. What is one real-world example of reinforcement learning?
a. Coordinating traffic signals to minimize traffic congestion. b. Identifying images of traffic lights from unseen images of traffic lights. c. Training dogs by giving them biscuits unconditionally. d. Detecting email spam about dog products.
In reinforcement learning, the reward is positive or negative feedback given to an agent for each action it takes in a given state. It can be positive, negative, or both depending on the desired outcome. Reinforcement learning is different from other types of machine learning because it involves the agent learning from experience and experimentation rather than relying solely on labeled training data. One real-world example of reinforcement learning is coordinating traffic signals to minimize traffic congestion.
a. The reward in reinforcement learning can be positive, negative, or both. It serves as feedback to the agent for each action it takes in a given state. The reward signal guides the agent towards maximizing positive outcomes or minimizing negative outcomes based on the task's objectives.
b. Reinforcement learning differs from other types of machine learning in that it emphasizes learning from experience and experimentation. Rather than relying solely on labeled training data, the agent interacts with an environment, takes actions, and learns through trial and error. Reinforcement learning algorithms enable the agent to learn optimal strategies by exploring the environment and receiving feedback through rewards.
c. Coordinating traffic signals to minimize traffic congestion is a real-world example of reinforcement learning. In this scenario, the system (agent) learns from experience and adjusts the timing of traffic signals based on real-time traffic conditions. The objective is to optimize traffic flow and reduce congestion by rewarding actions that lead to smoother traffic movements and penalizing actions that contribute to congestion. The system continuously adapts its behavior based on the observed rewards and the state of the traffic system.
To learn more about Data - brainly.com/question/32252970
#SPJ11
What are the main differences between memoization versus
tabulation?
Memoization and tabulation are two common techniques used in dynamic programming to optimize recursive algorithms.
Memoization involves caching the results of function calls to avoid redundant computations. It stores the computed values in a lookup table and retrieves them when needed, reducing the overall time complexity.
Tabulation, on the other hand, involves creating a table and systematically filling it with the results of subproblems in a bottom-up manner. It avoids recursion altogether and iteratively computes and stores the values, ensuring that each subproblem is solved only once.
While memoization is top-down and uses recursion, tabulation is bottom-up and uses iteration to solve subproblems.
To learn more about Memoization click on:brainly.com/question/31669532
#SPJ11
What are below tools mention comparison between them? And
describe the features, strengh and weaknesses.
1. jGenProg2
2. jKali
3. jMutRepair
The three tools, jGenProg2, jKali, and jMutRepair, are software development tools used in the field of software engineering. Each tool serves a specific purpose and has its own features, strengths, and weaknesses. jGenProg2 is a genetic programming tool for automatic software repair, jKali is a mutation testing tool, and jMutRepair is a tool for automatic program repair.
1. jGenProg2: jGenProg2 is a genetic programming tool specifically designed for automatic software repair. It uses genetic algorithms to automatically generate patches for faulty software. Its strength lies in its ability to automatically repair software by generating and evolving patches based on a fitness function. However, it has limitations such as the potential generation of incorrect or suboptimal patches and the requirement of a large number of program executions for repair.
2. jKali: jKali is a mutation testing tool used for assessing the quality of software testing. It introduces small modifications, called mutations, into the code to check the effectiveness of the test suite in detecting these changes. Its strength lies in its ability to identify weaknesses in the test suite and highlight areas that require improvement. However, it can be computationally expensive due to the large number of generated mutants and may require expertise to interpret the results effectively.
3. jMutRepair: jMutRepair is an automatic program repair tool that focuses on fixing software defects by applying mutation operators. It uses mutation analysis to generate patches for faulty code. Its strength lies in its ability to automatically repair defects by generating patches based on mutation operators. However, it may produce patches that are not semantically correct or introduce new bugs into the code.
Overall, these tools provide valuable assistance in software development, but they also have their limitations and require careful consideration of their outputs. Researchers and practitioners should assess their specific needs and evaluate the strengths and weaknesses of each tool to determine which one aligns best with their goals and requirements.
To learn more about Algorithms - brainly.com/question/31516924
#SPJ11
CHAT Application
Note: You must use Java FX GUIs!!!!
DO NOT use SWING GUIs.
Build a CHAT program, similar to a text-messaging app, to send text messages back and forth.
That is you will build 2 programs, a client(ChatClient.java) and a server(ChatServer.java). If you enter a String on the Server and Send it to the Client, the Client will display the Message it received.
You will need to build a Java FX Gui for this project….you will also need to use Sockets to send the text across the network…..and I would also use Threads…..the new Thread you make will wait for data to come in and display it in the GUI TextArea.
The GUI: Both the server program and the Client Program will have the exact same GUI. The both will have a TextArea at the top(To display incoming messages), a TextField at the bottom(for sending messages) and also a Send Button(event to send the data from the Textfield down the network).
When the user types in some text in the TextField and hits the Send button, the text will be delivered to the TextArea of the other program. And vice-versa.
Good Luck, and have fun!
Note: You must use Java FX GUIs!!!!
DO NOT use SWING GUIs.
To build a chat program using JavaFX GUIs, two programs are required: a client (ChatClient.java) and a server (ChatServer.java).
To implement the chat program, JavaFX GUIs are used for both the client and server programs. The GUI consists of a TextArea at the top to display incoming messages, a TextField at the bottom for entering messages, and a Send Button to send the text.
The client and server programs establish a network connection using sockets. When the user types a message in the TextField and clicks the Send Button, the message is sent across the network to the other program. This is achieved by writing the message to the output stream of the socket.
To handle incoming messages, a separate thread is created on both the client and server side. This thread continuously listens for incoming data from the socket's input stream. When data is received, it is displayed in the TextArea of the GUI using the JavaFX Application Thread to ensure proper GUI updates.
Using JavaFX GUIs, sockets, and threads, this chat program enables real-time communication between the client and server, allowing them to exchange text messages back and forth. The GUI provides a user-friendly interface for sending and receiving messages in a chat-like manner.
Learn more about JavaFX GUIs, sockets, and threads: brainly.com/question/33349272
#SPJ11
1. Write a program that returns the number of days between date_1 and date_2. Take into account leap years and correct number of days in each month (e.g., 28 or 29 days in Feb). The accepted input must be in a string format (MM-DD-YYYY). The correct output would also be in a string format (# days). (e.g., input: 06-20-2022 and 06-24-2022 output: 4 days) 2. Assume a user that is active p% of the time with a transfer speed of k Mbps. Write a Python program that computes the network usage of the users between date_1 and date 2 (use your program for Question 1 here). The network usage should be reported in Bytes with the appropriate multiple of binary metric (Kilo, Mega, Giga, ...).. (e.g., input 14-05-2022, 15-05-2022, p = 0.5, k=8 output: 42.1875 GB)
This Python program calculates the number of days between two dates and computes network usage based on user activity and transfer speed.
The program uses the 'datetime' module to parse the input dates and calculate the number of days between them. For Question 2, it utilizes the 'calculate_days' function from Question 1 to obtain the number of days. It then calculates the number of active seconds by multiplying the days with the seconds per day and the user activity percentage.
The total number of bits transferred is computed by multiplying the active seconds with the transfer speed in Mbps. The 'convert_bytes' function converts the total bits into the appropriate binary metric (e.g., KB, MB, GB) and returns the formatted result.
The example usage demonstrates how to input the dates, user activity percentage ('p'), and transfer speed ('k'), and displays the number of days and network usage in the desired format.
import datetime
# Question 1: Calculate the number of days between two dates
def calculate_days(date_1, date_2):
date_format = "%m-%d-%Y"
d1 = datetime.datetime.strptime(date_1, date_format)
d2 = datetime.datetime.strptime(date_2, date_format)
delta = d2 - d1
return str(delta.days) + " days"
# Question 2: Calculate network usage based on user activity and transfer speed
def calculate_network_usage(date_1, date_2, p, k):
days = int(calculate_days(date_1, date_2).split()[0])
seconds_per_day = 24 * 60 * 60
active_seconds = days * seconds_per_day * p
total_bits = active_seconds * k * 1000000
return convert_bytes(total_bits)
def convert_bytes(size):
power = 2**10
n = 0
labels = {0: 'Bytes', 1: 'KB', 2: 'MB', 3: 'GB', 4: 'TB'}
while size > power:
size /= power
n += 1
return "{:.4f} {}".format(size, labels[n])
# Example usage
date_1 = "06-20-2022"
date_2 = "06-24-2022"
p = 0.5
k = 8
print("Number of days:", calculate_days(date_1, date_2))
print("Network usage:", calculate_network_usage(date_1, date_2, p, k))
Learn more about Program click here :brainly.com/question/23275071
#SPJ11
1. (10 pts, standard.) Design an algorithm that finds a longest common subsequence between two given strings such that the subsequence starts with symbol ‘a' and ends with symbol ‘b’ and in between, there are exactly two 'c'. When the desired subsequence does not exist, your algorithm returns None. I will grade on the efficiency of your algorithm.
The algorithm returns the longest common subsequence meeting the conditions or None if no such subsequence exists. The time complexity of the algorithm is O(mn) because it fills in the entire table, where m and n are the lengths of the input strings.
1. The algorithm for finding the longest common subsequence meeting the given conditions involves dynamic programming. It utilizes a table to store the lengths of the common subsequences between prefixes of the two input strings. By iterating through the strings and updating the table, the algorithm determines the length of the longest common subsequence satisfying the conditions. If such a subsequence exists, it then reconstructs the subsequence by backtracking through the table. The algorithm has a time complexity of O(mn), where m and n are the lengths of the input strings.
2. The algorithm uses a dynamic programming approach to solve the problem. It begins by initializing a table with dimensions (m+1) x (n+1), where m and n are the lengths of the input strings. Each entry in the table represents the length of the longest common subsequence between the prefixes of the two strings up to that point.
3. The algorithm then iterates through the strings, comparing the characters at each position. If the characters are equal, it increments the value in the corresponding table entry by 1 compared to the diagonal entry in the table. Otherwise, it takes the maximum value from the entry above or to the left in the table.
4. After populating the entire table, the algorithm determines the length of the longest common subsequence satisfying the conditions by checking the value in the bottom-right corner of the table. If this value is less than 4 (2 'c's and 1 'a' or 'b' each), it means that no valid subsequence exists, and the algorithm returns None.
5. If a valid subsequence exists, the algorithm reconstructs it by backtracking through the table. Starting from the bottom-right corner, it moves to the left or up in the table, depending on which direction gives the maximum value. When it encounters a character equal to 'a', it appends it to the result. The algorithm continues until it reaches the top-left corner or finds the desired subsequence length.
Learn more about dynamic programming here: brainly.com/question/30885026
#SPJ11
Apply counting sort on the array A=<6, 0, 2, 1, 3, 2, 6,
4>. You need to show intermediate steps to get points.
In applying counting sort on the array A = <6, 0, 2, 1, 3, 2, 6, 4>: Create a counting array: <1, 1, 2, 1, 1, 0, 2> and sort the array using the counting array: <0, 0, 1, 2, 2, 3, 4, 6>.
To apply counting sort on the given array A = <6, 0, 2, 1, 3, 2, 6, 4>, we need to proceed as follows:
Find the range of values in the array. In this case, the minimum value is 0, and the maximum value is 6.
Create a counting array with a size equal to the range of values plus one. In this case, we need a counting array of size 7.
Counting Array: <0, 0, 0, 0, 0, 0, 0>
Traverse the input array and count the occurrences of each value by incrementing the corresponding index in the counting array.
Counting Array (after counting): <1, 1, 2, 1, 1, 0, 2>
Modify the counting array to store the cumulative counts. Each element in the modified counting array will represent the number of elements that are less than or equal to the corresponding index value.
Counting Array (after modification): <1, 2, 4, 5, 6, 6, 8>
Create a temporary output array of the same size as the input array.
Output Array: <0, 0, 0, 0, 0, 0, 0, 0>
Traverse the input array again, and for each element, place it in the correct position in the output array based on the corresponding value in the modified counting array. Decrease the count in the modified counting array by 1 after placing each element.
Output Array (after sorting): <0, 0, 1, 2, 2, 3, 4, 6>
The output array is now the sorted version of the input array.
Therefore, the intermediate steps of applying counting sort on the array A = <6, 0, 2, 1, 3, 2, 6, 4> are as described above.
Learn more about array:
https://brainly.com/question/28565733
#SPJ11
Explore the classes of computers according to their
capabilities
Computers can be classified into various classes based on their capabilities.
Here are some common classes of computers:
Supercomputers: These are highly powerful computers designed to perform complex calculations and simulations. They are used for tasks such as weather forecasting, scientific research, and cryptography. Supercomputers have a large number of processors and can perform trillions of calculations per second.
Mainframe Computers: Mainframes are large-scale computers that are capable of processing large volumes of data and handling multiple concurrent users. They are known for their reliability, security, and scalability. Mainframes are commonly used in organizations for critical applications like banking, airline reservations, and government systems.
Minicomputers: Minicomputers are smaller in size and less powerful than mainframes. They have moderate processing capabilities and are often used in small to medium-sized businesses for tasks like database management, network serving, and scientific calculations.
Personal Computers (PCs): PCs are the most common type of computer used by individuals. They are designed for personal use and provide a wide range of capabilities, including internet browsing, word processing, gaming, and multimedia tasks. PCs can be desktop computers or laptops, and they are suitable for general-purpose computing.
Workstations: Workstations are high-performance computers designed for specialized tasks such as computer-aided design (CAD), graphic design, video editing, and scientific simulations. They have powerful processors, large amounts of memory, and advanced graphics capabilities.
Mobile Devices: This class includes smartphones, tablets, and other portable devices. Mobile devices are compact and lightweight, designed for mobility and convenience. They have limited processing power compared to PCs but offer a wide range of features such as internet access, multimedia playback, and mobile applications.
Embedded Systems: Embedded systems are specialized computers embedded within other devices or systems. They are designed to perform specific functions and are found in various applications, including automotive systems, industrial control systems, medical devices, and consumer electronics. Embedded systems are often optimized for efficiency, low power consumption, and real-time operation.
It's important to note that these classes are not mutually exclusive, and there can be overlap between them. Additionally, advancements in technology continually blur the lines between classes as computing capabilities evolve.
Learn more about Computers here:
https://brainly.com/question/32297640
#SPJ11
Can you Declare a pointer variable? - Assign a value to a pointer variable? Use the new operator to create a new variable in the freestore? ? - Write a definition for a type called NumberPtr to be a type for pointers to dynamic variables of type int? Use the NumberPtr type to declare a pointer variable called myPoint?
To declare and assign a value to a pointer variable, you can use the following code:
int* myPointer; // Declaration of a pointer variable
int* myPointer = new int; // Assigning a value to the pointer variable using the new operator
In C++, a pointer variable is declared by specifying the type followed by an asterisk (*). To assign a value to a pointer variable, you can use the assignment operator (=) and the new operator to dynamically allocate memory for the pointed-to variable.
In the provided code, int* myPointer; declares a pointer variable named myPointer of type int*. The asterisk (*) indicates that myPointer is a pointer variable that can store the memory address of an int variable.
int* myPointer = new int; assigns a value to myPointer by using the new operator to dynamically allocate memory for an int variable in the freestore (heap). The new int expression allocates memory for an int variable and returns a pointer to the allocated memory. The assigned value to myPointer is the memory address of the dynamically allocated int variable.
To summarize, the code declares a pointer variable named myPointer of type int* and assigns it the memory address of a dynamically allocated int variable using the new operator. This allows myPointer to point to and access the dynamically allocated int variable in the freestore.
To learn more about freestore
brainly.com/question/29774065
#SPJ11
(5 x 2 = 10 marks) What is the difference between primary and secondary clustering in hash collision? a. Explain how each of them can affect the performance of Hash table data structure b. Give one example for each type.
a. Primary clustering and secondary clustering are two different phenomena that occur in hash collision resolution strategies in hash tables.
Primary clustering occurs when multiple keys with the same hash value are continuously placed in nearby slots in the hash table. This results in long chains of collisions, where accessing elements in these chains can become inefficient. Primary clustering can negatively impact the performance of the hash table by increasing the average search time and degrading overall efficiency.
Secondary clustering, on the other hand, happens when keys with different hash values are mapped to the same slot due to a collision. This can lead to clusters of collisions spread throughout the hash table. While secondary clustering may not create long chains like primary clustering, it can still impact the search time by increasing the number of comparisons needed to locate the desired element.
Know more about Primary clustering here:
https://brainly.com/question/28579836
#SPJ11
Python programming. Topic: Regular expression
How to use regular expression to only print out the names hidden in the following 'keys:\\..." lines from a txt file?
For example, the txt file will be named names.txt.
The lines will be:
keys:\\xyz.yes.ss/~kenneth/
keys:\\xyz.yes.ss/~victor/
keys:\\xyz.yes.ss/~john/
nono:\\fgh.noo.xx/~maria/
The output of the program should be:
Names are:
kenneth
victor
john
To extract the names hidden in the given 'keys:...' lines using regular expressions in Python, you can use the 're' module.
Here's an example code snippet that achieves the desired output:
import 're'-
file_name = "names.txt" # Replace with the actual file name
# Read the file
with open(file_name, "r") as file:
lines = file.readlines()
# Pattern to match the names
pattern = r"keys:\\xyz\.yes\.ss/~(\w+)/"
# Extract the names using regular expressions
names = []
for line in lines:
match = re.search(pattern, line)
if match:
names.append(match.group(1))
# Print the extracted names
print("Names are:")
for name in names:
print(name)
The code starts by importing the re module, which provides support for regular expressions in Python. The file_name variable is set to the name of the text file containing the lines. The file is opened using a with statement to ensure it is properly closed after reading. The lines of the file are read using readlines() and stored in the lines list.
The pattern variable is set to the regular expression pattern keys:\\xyz\.yes\.ss/~(\w+)/, which matches the desired names. The \ characters before the periods (.) are used to escape them since the period is a special character in regular expressions.
A loop iterates over each line in the lines list. re.search() is used to search for a match between the pattern and the line. If a match is found, match.group(1) retrieves the captured group within the parentheses, which represents the name. The extracted names are appended to the names list. Finally, the extracted names are printed, preceded by the "Names are:" statement, using a loop.
When you run the code, it will read the file, apply the regular expression pattern to each line, and print out the extracted names. In the example provided, the output will be:
Names are:
kenneth
victor
john
LEARN MORE ABOUT Python here: brainly.com/question/30391554
#SPJ11
t: How many Location objects will there be in memory after the following code is executed? Location point1 = new Location (0.0, 1.0); Location point2 = point1; Location point3 = point2.clone (); Location point4 = null; Location point5 = null; if(pointl point3) { point4 = point3.clone(); point5 new Location (10.0, 4.0); } if(point2 pointl) { } Select one:
a. 2 b. 3 c. 4
d. 5
The answer is c. 4. Based on the provided code, there will be a total of 4 Location objects in memory after the code is executed.
code, = new Location(0.0, 1.0); // Creates a new Location object and assigns it to point1.
Location point2 = point1; // Assigns point1 to point2, so both variables reference the same Location object.
Location point3 = point2.clone(); // Creates a new Location object using the clone() method and assigns it to point3.
Location point4 = null; // Declares point4 variable but doesn't reference any object yet.
Location point5 = null; // Declares point5 variable but doesn't reference any object yet.
if (point1 == point3) { // Checks if point1 and point3 reference the same object (which is not true in this case).
point4 = point3.clone(); // Creates a new Location object using the clone() method and assigns it to point4.
Location point5 = new Location(10.0, 4.0); // Creates a new Location object and assigns it to point5.
So, in total, there are 4 Location objects created: point1, point2 (same as point1), point3, and point4. point5 is declared but not assigned any Location object.
Therefore, the answer is c. 4.
Learn more about code here:
https://brainly.com/question/31228987
#SPJ11
By using 3 prime numbers, we can also define RSA cryptostem where N=pqr. Again we must have gcd(e,ϕ(N))=1 and d is the multiplicative inverse of e in modulo ϕ(N). (b) Why this 3-prime RSA is not preferred?
The 3-prime RSA is not preferred due to weaker security, increased complexity, longer key lengths, and lack of standardization compared to the 2-prime RSA.
The 3-prime RSA, where the modulus N is defined as N = pqr using three prime numbers (p, q, and r), is not preferred for several reasons:
Security: The security of RSA is based on the difficulty of factoring large composite numbers into their prime factors. In the case of 3-prime RSA, the factorization becomes easier since the modulus N has only three prime factors. This makes it more vulnerable to attacks such as the General Number Field Sieve (GNFS) algorithm, which is a powerful method for factoring large numbers.
Complexity: The use of three prime numbers increases the complexity of the RSA algorithm. The computations involved in key generation, encryption, and decryption become more intricate, leading to higher computational costs and slower operations compared to the standard 2-prime RSA.
Key Length: To achieve a similar level of security compared to 2-prime RSA, the key length for 3-prime RSA needs to be longer. This is because the prime factors of the modulus N are smaller in the 3-prime case, making it easier to factorize the modulus. Longer keys require more computational resources and may have practical limitations in terms of memory usage and performance.
Standardization: The RSA encryption algorithm is widely used and standardized, with well-defined protocols and implementations based on the 2-prime RSA. The use of 3-prime RSA introduces complexities and deviations from the established standards, making it less compatible and interoperable with existing RSA implementations.
Considering these factors, the 3-prime RSA is not preferred in practice due to its weaker security, increased complexity, longer key lengths, and lack of standardization. The 2-prime RSA remains the more widely adopted and recommended choice for RSA-based cryptographic systems.
Learn more about modulus here:
brainly.com/question/30756002
#SPJ11
Take a 256 × 256 grayscaled image. Hide a (text) message of length 15 to 25 in the image such that the first bit of the hidden message is positioned at the pixel
It's important to note that this basic LSB method may not be robust against certain image processing operations or compression algorithms. For more advanced and secure steganography techniques, more complex algorithms and encryption methods can be employed.
To hide a text message within a grayscale image, a technique called steganography can be employed. In this case, we'll use a simple LSB (Least Significant Bit) method to embed the message within the image.
Here's a high-level overview of the process:
Convert the 15 to 25 character text message into binary representation. Each character will be represented by 8 bits (1 byte) of binary data.
Open the 256 × 256 grayscale image.
Iterate through the binary representation of the text message and modify the least significant bit of each pixel value in the image to match the corresponding bit of the message. This can be done by checking each bit of the message and modifying the least significant bit of the pixel value accordingly.
Once all bits of the message have been embedded into the image, save the modified image.
know more about LSB method here:
https://brainly.com/question/31984614
#SPJ11
MATLAB MATLAB MATLAB LOOP QUESTION
Consider the sequence
1,32,1712,…
Defined by
x1=1, xi=12xi-1+2xi-1for i=2,3,4,...,N
The sequence converges on 2 as N increase.
Write a function named SeqToSqrt2 that accepts a signal input variable N that will be an integer. Add commands to the function to do the following and assign the results to the indicated output variables names.
Generate a row vector containing the first N terms of the sequence and assign to the variables terms
Generate a scalar variable that is the relative error, e, between the last term in the sequences and 2 given by the formula below (the vertical bars indicate an absolute value). Assign this error result to the variable relError.
e=2-xy2
Your solution to this problem should use a for loop.
Here is a function named SeqToSqrt2 that accepts a signal input variable N that will be an integer. The function generates a row vector containing the first N terms of the sequence and assigns it to the variable terms.
It also generates a scalar variable that is the relative error between the last term in the sequence and 2 given by the formula below (the vertical bars indicate an absolute value). The error result is assigned to the variable relError.
function [terms, relError] = SeqToSqrt2(N)
x(1) = 1;
for i = 2:N
x(i) = 1/2*x(i-1) + 2*x(i-1);
end
terms = x;
relError = abs(2 - x(end))/2;
end
The function uses a for loop to generate the sequence. The first term of the sequence is initialized to 1 and each subsequent term is calculated using the formula xi=12xi-1+2xi-1for i=2,3,4,…,N. The function returns a row vector containing the first N terms of the sequence and a scalar variable that is the relative error between the last term in the sequence and 2.
LEARN MORE ABOUT integer here: brainly.com/question/1768255
#SPJ11
Given sorted values for price: 89 15 16 21 21 24 26 27 30 30 34 a. Partition them into 3 bins by each of the following method (i) Equal frequency partitioning b. Apply the following binning methods for data smoothing (i) Smoothing by bin means (ii) Smoothing by bin boundaries.
Partitioning them into 3 bins by equal frequency partitioning.Method of Equal Frequency Partitioning:We can use the method of equal frequency partitioning to split the given sorted values for the price into three bins.
For instance:Divide the data set into three equal portions of five values each: {89 15 16 21 21 | 24 26 27 30 30 | 34}.These are the three bins that are split using the method of equal frequency partitioning.b. Apply the following binning methods for data smoothing.The following binning methods can be used for data smoothing:i. Smoothing by bin meansIn smoothing by bin means, the original values in each bin are replaced by the average value of all the data points in the bin.
After this procedure, the bins are then named based on their corresponding mean values.The three bins will be assigned new values as shown:Bin 1: {89 15 16 21 21} mean = 32.4Bin 2: {24 26 27 30 30} mean = 27.4Bin 3: {34} mean = 34.0ii. Smoothing by bin boundariesSmoothing by bin boundaries is a method of data smoothing that entails replacing all of the data values within a bin with the minimum or maximum value of the bin boundaries, respectively. The bins are given new values as follows:Bin 1: {89 15 16 21 21} replaced with {89 15 15 15 15}Bin 2: {24 26 27 30 30} replaced with {24 24 24 30 30}Bin 3: {34} replaced with {34 34 34 34 34}These are the answers that satisfy the requirements of the given question.
To know more about data visit:
https://brainly.com/question/31435267
#SPJ11
Create a program on JavaScript that presents the following outputs in the same format. Assume that all test inputs will be valid and there is always at least two sets of course keywords inputter. Do not create any additional classes. User input in RED Enter course #1: MISO1234 Enter course #2: MISO5678 Enter course #3: Enter keywords for "MISO1234": java, programming, development, software Enter keywords for "MISP5678": organisation, enterprise, business Enter filename #1: comp_1.txt Enter contents of "unlocked_comp.txt": This course aims to develop students' programming and problem solving abilities in preparation for work in enterprises which use Java. The course also aims to develop students' ability to work in organisational teams to solve problems through the application of programming concepts to design. Enter filename #2: comp_2.txt Enter contents of "next_time_lock_your_comp.txt": This course aims to further develop students' business and organisational knowledge to prepare them for the enterprise. If you are studying software engineering or computer science, this course will give you a better comprehension of the business context in which your software and technology will be deployed. Enter filename #3: comp_3.txt Enter contents of "why_is_this_comp_unlocked.txt": Tutorials will be run as weekly programming labs. A programming lab provides a practical, hands-on environment where students will learn by doing. The role of the programming lab is to help students build understanding and problem-solving skills through the application of the Java programming language in the development of software.
This JavaScript program prompts the user to enter course information, keywords for each course, and filename with contents for each course.
Here's an example of a JavaScript program that takes user inputs and presents the desired outputs:
```javascript
// Initialize arrays to store course and keyword information
let courses = [];
let keywords = [];
// Prompt the user to enter course information
for (let i = 0; i < 3; i++) {
courses.push(prompt(`Enter course #${i+1}:`));
}
// Prompt the user to enter keywords for each course
for (let i = 0; i < 3; i++) {
keywords.push(prompt(`Enter keywords for "${courses[i]}":`).split(', '));
}
// Prompt the user to enter filename and contents for each course
let outputs = [];
for (let i = 0; i < 3; i++) {
let filename = prompt(`Enter filename #${i+1}:`);
let contents = prompt(`Enter contents of "${filename}":`);
outputs.push(`Filename: ${filename}\nCourse: ${courses[i]}\nKeywords: ${keywords[i].join(', ')}\nContents: ${contents}\n`);
}
// Display the outputs
for (let i = 0; i < 3; i++) {
console.log(`Output #${i+1}:\n${outputs[i]}`);
}
```
It uses arrays to store the inputs and then generates the desired output format for each course. Finally, it displays the outputs to the console. The program makes use of loops and string concatenation to handle multiple inputs and generate the required output structure.
To learn more about JavaScript click here
brainly.com/question/16698901
#SPJ11
Suppose a university have a CIDR Subnet: 200.100.12.64/26. This university include four departments. Please separate the original CIDR Subnet to 4 small Subnets for four departments. Please give the answer of the following questions for 4 Subnets (Don't need the detailed computation and analysis of every steps): (1) What is the Subnet length (how many bits) for every Subnet? (2) How many IP address in every Subnet? (3) Write every Subnet like this: x.X.X.X/X? (4) Write the IP address scope for every Subnet?
To separate the original CIDR subnet 200.100.12.64/26 into four smaller subnets for four departments, we can follow these steps:
Determine the subnet length (number of bits) for each subnet:
Since the original subnet has a /26 prefix, it has a subnet mask of 255.255.255.192. To divide it into four equal subnets, we need to borrow 2 bits from the host portion to create 4 subnets.
Calculate the number of IP addresses in each subnet:
With 2 bits borrowed, each subnet will have 2^2 = 4 IP addresses. However, since the first IP address in each subnet is reserved for the network address and the last IP address is reserved for the broadcast address, only 2 usable IP addresses will be available in each subnet.
Write each subnet in the x.X.X.X/X format:
Based on the borrowing of 2 bits, the subnet lengths for each subnet will be /28.
The subnets for the four departments will be as follows:
Subnet 1: 200.100.12.64/28 (IP address scope: 200.100.12.65 - 200.100.12.78)
Subnet 2: 200.100.12.80/28 (IP address scope: 200.100.12.81 - 200.100.12.94)
Subnet 3: 200.100.12.96/28 (IP address scope: 200.100.12.97 - 200.100.12.110)
Subnet 4: 200.100.12.112/28 (IP address scope: 200.100.12.113 - 200.100.12.126)
Note: The first IP address in each subnet is reserved for the network address, and the last IP address is reserved for the broadcast address. Therefore, the usable IP address range in each subnet will be from the second IP address to the second-to-last IP address.
Learn more about subnet here:
https://brainly.com/question/32152208
#SPJ11
When using a file blocking profile you see a file type called Multi-Level-Encoding. You are running PanOS 9.1. Is your firewall is capable of decoding up to 4 levels? True = Yes False = No True False
Previous question
False. PanOS 9.1 does not support Multi-Level-Encoding with up to 4 levels of decoding. Multi-Level-Encoding is a technique used to encode files multiple times to obfuscate their content and bypass security measures.
It involves applying encoding algorithms successively on a file, creating multiple layers of encoding that need to be decoded one by one.
PanOS is the operating system used by Palo Alto Networks firewalls, and different versions of PanOS have varying capabilities. In this case, PanOS 9.1 does not have the capability to decode files with up to 4 levels of Multi-Level-Encoding. The firewall may still be able to detect the presence of files with Multi-Level-Encoding, but it will not be able to fully decode them if they have more than the supported number of levels.
It's important to keep the firewall and its operating system up to date to ensure you have the latest security features and capabilities. You may want to check for newer versions of PanOS that may have added support for decoding files with higher levels of Multi-Level-Encoding.
Learn more about Multi-Level-Encoding here:
https://brainly.com/question/31981034
#SPJ11
Write a C++ code to input the value of variable Age and if Age is larger than or equal 70 then print "You are old otherwise print You still young"
Previous question
Sure, here's an example C++ code that prompts the user to input their age and then checks if they are over 70 years old:
cpp
#include <iostream>
using namespace std;
int main() {
int age;
cout << "Please enter your age: ";
cin >> age;
if (age >= 70) {
cout << "You are old" << endl;
} else {
cout << "You are still young" << endl;
}
return 0;
}
This code initializes a variable age to store the user's age, prompts the user to input their age using cin, and then uses an if statement to check if the age is greater than or equal to 70. If it is, the program prints "You are old" to the console. Otherwise, it prints "You are still young".
Learn more about code here:
https://brainly.com/question/18133242
#SPJ11
Class Phone_Book_Tree:
It includes one private instance variable: Person Root.
It contains the following public methods:
o A method insert that takes String name and integer telephone, creates and inserts a new Person node into the binary tree, based on the telephone number.
o A method print_PreOrder that traverses and prints the contents of the tree in a pre-order. The method prints the tree in a hierarchical order showing the node level number and its data, as shown in the sample output.
o A method identical that receives a Phone_Book_Tree object, returns true if two trees are identical and false otherwise.
o A method Count that returns the count of telephone numbers that start with one. [For example, a telephone number 11801801]
o A method Search that receives a String name and returns the corresponding telephone number. If the name was not found in the tree, the method returns -1.
[Hint: Use recursive methods]
The "Phone_Book_Tree" class manages a phone book using a binary tree, providing methods for insertion, printing, similarity check, counting specific numbers, and searching. Recursive techniques are utilized for tree operations.
Here's an implementation of the "Phone_Book_Tree" class with the specified methods:
```java
class Phone_Book_Tree {
private class Person {
String name;
int telephone;
Person left;
Person right;
Person(String name, int telephone) {
this.name = name;
this.telephone = telephone;
left = null;
right = null;
}
}
private Person root;
public void insert(String name, int telephone) {
root = insertNode(root, name, telephone);
}
private Person insertNode(Person current, String name, int telephone) {
if (current == null) {
return new Person(name, telephone);
}
if (telephone < current.telephone) {
current.left = insertNode(current.left, name, telephone);
} else if (telephone > current.telephone) {
current.right = insertNode(current.right, name, telephone);
}
return current;
}
public void print_PreOrder() {
printPreOrder(root, 0);
}
private void printPreOrder(Person current, int level) {
if (current == null) {
return;
}
System.out.println("Level " + level + ": " + current.name + " - " + current.telephone);
printPreOrder(current.left, level + 1);
printPreOrder(current.right, level + 1);
}
public boolean identical(Phone_Book_Tree other) {
return checkIdentical(root, other.root);
}
private boolean checkIdentical(Person node1, Person node2) {
if (node1 == null && node2 == null) {
return true;
}
if (node1 == null || node2 == null) {
return false;
}
return (node1.telephone == node2.telephone) &&
checkIdentical(node1.left, node2.left) &&
checkIdentical(node1.right, node2.right);
}
public int Count() {
return countStartingWithOne(root);
}
private int countStartingWithOne(Person current) {
if (current == null) {
return 0;
}
int count = countStartingWithOne(current.left) + countStartingWithOne(current.right);
if (startsWithOne(current.telephone)) {
count++;
}
return count;
}
private boolean startsWithOne(int telephone) {
String numberStr = String.valueOf(telephone);
return numberStr.startsWith("1");
}
public int Search(String name) {
return searchTelephone(root, name);
}
private int searchTelephone(Person current, String name) {
if (current == null) {
return -1;
}
if (current.name.equals(name)) {
return current.telephone;
}
int telephone = searchTelephone(current.left, name);
if (telephone != -1) {
return telephone;
}
return searchTelephone(current.right, name);
}
}
```
The "Phone_Book_Tree" class represents a binary tree data structure for managing a phone book. It has a private inner class "Person" to represent each person's entry with name and telephone number. The class provides the following public methods:
1. `insert(String name, int telephone)`: Inserts a new person node into the binary tree based on the telephone number.
2. `print_PreOrder()`: Traverses and prints the contents of the tree in pre-order, displaying the node level number and its data.
3.
`identical(Phone_Book_Tree other)`: Checks if two trees are identical by comparing their structure and values.
4. `Count()`: Returns the count of telephone numbers that start with one.
5. `Search(String name)`: Searches for a person's telephone number by their name and returns it. Returns -1 if the name is not found in the tree.
These methods are implemented using recursive techniques to traverse and manipulate the binary tree.
Note: The code provided is in Java programming language.
Learn more about Java here: brainly.com/question/33208576
#SPJ11
Write a program that checks matching words - First asks the user to enter 2 String variables word1 and word2 - Save these in two String variables. - Use string methods to answer below questions: o Are these words entered same (ignore case)? o Are these words entered same (case sensitive)? - Test for different inputs - Write a For loop to print each character of word1 on a separate line
The given program checks for matching words entered by the user and performs various comparisons and character printing. The program follows these steps:
Prompt the user to enter two string variables, word1 and word2, and save them as separate string variables.
Use string methods to answer the following questions:
a. Check if the words entered are the same, ignoring the case sensitivity.
b. Check if the words entered are the same, considering the case sensitivity.
Test the program with different inputs to verify its functionality.
Implement a For loop to iterate through each character of word1 and print each character on a separate line.
The program allows the user to compare two words and determine if they are the same, either ignoring or considering the case sensitivity. Additionally, it provides a visual representation of word1 by printing each character on separate lines using a For loop.
Learn more about variables here : brainly.com/question/31751660
#SPJ11
Create a function in python called Q9 that uses a loop to determine how many times, starting with the number 3, a number can be squared until it reaches at least a twenty digit number . ie. It takes three times, starting with the number 3, that a number can be squared until it reaches a four digit number: 3^2 = 9, 9^2 = 81, 81^2=6561)
Here's a Python function called Q9 that uses a loop to determine how many times a number can be squared until it reaches at least a twenty-digit number:
python
Copy code
def Q9():
number = 3
count = 0
while number < 10**19: # Check if number is less than a twenty-digit number
number = number ** 2
count += 1
return count
Explanation:
The function Q9 initializes the variable number with the value 3 and count with 0.
It enters a while loop that continues until number is less than 10^19 (a twenty-digit number).
Inside the loop, number is squared using the ** operator and stored back in the number variable.
The count variable is incremented by 1 in each iteration to keep track of the number of times the number is squared.
Once the condition number < 10**19 is no longer true, the loop exits.
Finally, the function returns the value of count, which represents the number of times the number was squared until it reached a twenty-digit number.
You can call the Q9 function to test it:
result = Q9()
print("Number of times squared:", result)
This will output the number of times the number was squared until it reached at least a twenty-digit number.
Learn more about Python here:
https://brainly.com/question/31055701
#SPJ11
Define the following data types in the requested PL. (a) Cartesian product of integers and doubles in Haskell. (b) Cartesian product of integers and doubles in Java. (c) Union of integers and doubles in Haskell.
Use pattern matching to extract the value from the Either type and perform different computations based on whether it contains an Integer or a Double.
(a) Cartesian product of integers and doubles in Haskell:
In Haskell, we can define a cartesian product of integers and doubles as a tuple using the data keyword. Here's an example code snippet that defines a type IntDouble for the cartesian product of Integers and Doubles:
haskell
data IntDouble = IntDouble Integer Double
This code creates a new type IntDouble which is a tuple containing an Integer and a Double. We can create a value of this type by calling the constructor IntDouble with an Integer and a Double argument, like so:
haskell
-- Create a value of type IntDouble
myValue :: IntDouble
myValue = IntDouble 3 2.5
(b) Cartesian product of integers and doubles in Java:
In Java, we can define a cartesian product of integers and doubles as a class containing fields for an integer and a double. Here's an example code snippet that defines a class IntDouble for the cartesian product of Integers and Doubles:
java
public class IntDouble {
private int integerValue;
private double doubleValue;
public IntDouble(int integerValue, double doubleValue) {
this.integerValue = integerValue;
this.doubleValue = doubleValue;
}
}
This code creates a new class IntDouble which has two fields, an integer and a double. The constructor takes an integer and a double argument and initializes the fields.
We can create a value of this type by calling the constructor with an integer and a double argument, like so:
java
// Create a value of type IntDouble
IntDouble myValue = new IntDouble(3, 2.5);
(c) Union of integers and doubles in Haskell:
In Haskell, we can define a union of integers and doubles using the Either type. Here's an example code snippet that defines a type IntOrDouble for the union of Integers and Doubles:
haskell
type IntOrDouble = Either Integer Double
This code creates a new type IntOrDouble which can contain either an Integer or a Double, but not both at the same time. We can create a value of this type by using either the Left constructor with an Integer argument or the Right constructor with a Double argument, like so:
haskell
-- Create a value of type IntOrDouble containing an Integer
myValue1 :: IntOrDouble
myValue1 = Left 3
-- Create a value of type IntOrDouble containing a Double
myValue2 :: IntOrDouble
myValue2 = Right 2.5
We can then use pattern matching to extract the value from the Either type and perform different computations based on whether it contains an Integer or a Double.
Learn more about integers here:
https://brainly.com/question/32250501
#SPJ11
You can choose the number of slides to print on a notes page. Select one: OTrue OFalse
False. In PowerPoint, you cannot directly choose the number of slides to print on a notes page. By default, each slide is printed on a separate page with its corresponding speaker notes.
The notes page includes a thumbnail of the slide along with the notes you've added for that slide. However, PowerPoint provides options for customizing the layout and format of the notes page, including the ability to adjust the size and placement of the slide thumbnail and notes section.
To print multiple slides on a single page, you can use the "Handouts" option instead of the notes page. With handouts, you can choose to print multiple slides per page, allowing you to save paper and create handout materials with smaller slide sizes. PowerPoint offers several predefined layouts for handouts, such as 2, 3, 4, 6, or 9 slides per page. Additionally, you can customize the layout by adjusting the size and arrangement of the slides on the handout.
In conclusion, while you cannot choose the number of slides to print on a notes page, you have the flexibility to print multiple slides per page using the handouts option. This feature provides a convenient way to create compact handout materials for presentations, training sessions, or meetings, optimizing the use of paper and providing an easy-to-follow reference for your audience.
To learn more about predefined layouts click here:
brainly.com/question/15710950
#SPJ11