The false statement is that in order to make a metamorphic rock, burial and/or heating are needed. This is false because metamorphic rock can also form from other metamorphic rocks, and does not necessarily require burial and/or heating.
Metamorphic rocks are formed when existing rocks are exposed to extreme temperature and pressure, which can occur either deep within the earth or near the surface. When existing metamorphic rocks experience these extreme conditions, they can change into different metamorphic rocks, without requiring burial or heating.
This shows that the pathway of the rock cycle is not always from one rock type to another, but can also be from one rock type to the same rock type. For example, a granite that was eroded, transported, and then deposited would eventually become a sedimentary rock.
This sedimentary rock could then undergo metamorphism and be changed into a metamorphic rock, without requiring burial and/or heating. This is an example of how the rock cycle indicates that sedimentary rocks can form from other sedimentary rocks.
Know more about metamorphism here
https://brainly.com/question/1366827#
#SPJ11
which of the following hazards are typically associated with a shield volcano? (check all that apply) group of answer choices pyroclastic flows lahars lava flows tephra deposits volcanic gases
Shield volcanoes are typically associated with lava flows and volcanic gases.Lava flows are a common hazard associated with shield volcanoes as they have a low viscosity.
Shield volcanoes are known for their relatively gentle, broad slopes that gradually rise from the surrounding landscape.They are typically formed by the eruption of low-viscosity, basaltic lava, which tends to flow easily and quickly, allowing the volcano to spread out over a large area.Due to their shape and composition, shield volcanoes are generally considered to be less explosive than other types of volcanoes.Lava flows are a common hazard associated with shield volcanoes, as they can travel for long distances and potentially impact populated areas.Volcanic gases, including sulfur dioxide, carbon dioxide, and hydrogen sulfide, can also be emitted during eruptions and pose a health risk to humans and animals.Although shield volcanoes are generally less explosive, they can still produce explosive eruptions and eject tephra, which is a mixture of ash, rocks, and other debris.
learn more about Shield volcanoes here:
https://brainly.com/question/2715813
#SPJ1
When a glacier begins to melt due to warmer temperatures, the resulting water flows to the valley below carrying with it sediments, sand, and gravel, scraping it away and depositing it, and that sediment deposited by the glacier is called __________.
Answer:
The sediment deposited by the glacier is called glacial till.
When a glacier begins to melt due to warmer temperatures, the resulting water flows to the valley below carrying with it sediments, sand, and gravel, scraping it away and depositing it, and that sediment deposited by the glacier is called Till.
The sediment deposited by the glacier is known as till. This material is the debris of the glacier that has been transported by the ice and then deposited as it melts. The till deposits are characterized by the variable size of the particles and a lack of sorting by size. Additionally, the material is frequently unstratified and frequently has a random orientation of particles. Till can be found throughout many regions, including areas previously occupied by glaciers and ice sheets.
Learn more about glacier here: https://brainly.com/question/6666513
#SPJ11
whichtype of dune forms at right angles to the wind when there is abundant sand, a lack of vegetation and a constant wind direction
Sand dunes form when a wind-driven supply of sand accumulates in areas that have sparse vegetation and uniform wind direction. Dunes form in two main shapes: crescent-shaped (barchan) and transverse. Transverse dunes form at right angles to the prevailing wind, and are typically found in areas with abundant sand, sparse vegetation, and consistent wind direction.
These dunes form in three distinct steps. The first is called “saltation,” which is the process of sand particles being thrown up and carried away by the wind. As the sand accumulates, the wind is deflected and sand grains roll downwind, creating a mound. This mound becomes the second step of transverse dune formation, called “avalanching.” Finally, the sand particles become stationary, allowing the dune to take its shape.
The size of a transverse dune depends on the amount of sand present and the strength of the wind. The more sand, the larger the dune will become. In addition, when the wind is strongest, the sand can be carried farther upwind, resulting in larger dunes. As a result, transverse dunes can vary in size and shape.
Transverse dunes are an important part of the environment, providing habitats for animals and acting as barriers to protect coasts from storm surges. They are also important for trapping sediment and organic matter, helping to build soils and stabilize coasts. As such, it is important to maintain the health of transverse dunes by preserving them from human-induced erosion.
Know more about Sand dunes here:
https://brainly.com/question/2456718
#SPJ11
which of the following is characteristic of most terrestrial biomes? which of the following is characteristic of most terrestrial biomes? clear boundaries between adjacent biomes vegetation demonstrating vertical layering a distribution predicted almost entirely by rock and soil patterns cold winter months
The majority of terrestrial biomes are characterised by distinct borders between neighbouring biomes. Although they are also typical in many terrestrial biomes.
vertical layering in plants and a distribution that is nearly totally predicted by rock and soil patterns are not ubiquitous. Only select biomes, such the temperate deciduous forest and taiga (boreal forest), are known for their chilly winters.The majority of terrestrial biomes are distinguished by clearly defined borders between them. While certain biomes may display vertical layering in plants and have a distribution that is partly affected by rock and soil patterns, they are not uniform properties across all biomes. However, only some biomes, such the temperate deciduous forest and taiga, typically have frigid winters. Not all biomes experience this (boreal forest).
learn more about terrestrial biomes here:
https://brainly.com/question/29766844
#SPJ4
Suggest materials that can be used to repair damaged weather instruments in a weather station and explain your choices
Some materials that can be used to repair damaged weather instruments in a weather station include:
Epoxy Silicone sealant Lubricant How can we fix instruments at weather stations ?Epoxy is a strong adhesive that can be used to repair cracks or breaks in plastic or metal components of weather instruments. It can also be used to seal leaks in certain instruments.
Silicone sealant is a flexible sealant that can be used to seal joints and gaps in weather instruments. It is particularly useful for instruments that are exposed to moisture or humidity.
For instruments that have moving parts or require periodic maintenance, lubricants such as silicone spray or WD-40 can be used to keep them functioning properly.
Find out more on weather stations at https://brainly.com/question/27767578
#SPJ1
if we allow for moisture loss due to a moist greenhouse effect, the inner boundary of the sun's habitable zone would be
If we allow for moisture loss due to a moist greenhouse effect, the inner boundary of the sun's habitable zone would be further out than it is at present.
What is the habitable zone?A habitable zone refers to a range of distances from a star within which it is possible for a planet with sufficient atmospheric pressure to maintain liquid water on its surface. The concept of a habitable zone applies not only to planets in our solar system, but also to planets orbiting other stars, especially those that might be capable of supporting life.
The moist greenhouse effect is a theoretical term used to describe the effect that water vapor would have on the temperature of a planet's surface in the presence of an abundant amount of water.
If there is too much water vapor in the atmosphere of a planet, it may cause a "moist greenhouse effect," where the planet is too hot for liquid water to exist on its surface, even though it is within the habitable zone.
According to the scientists, the inner boundary of the sun's habitable zone would be further out than it is at present if we allow for moisture loss due to a moist greenhouse effect, because the greenhouse effect caused by the water vapor would cause the planet's surface to be much warmer than it would be without the presence of the water vapor.
To know more about habitable zone refer here :
https://brainly.com/question/29908245#
#SPJ11
The Phoenician script differs from other ancient scripts like Linear-A, Cuneiform and Hieroglyphs in thatA. it is alphabetic, meaning that each character represents a letter rather than a syllable or word.B. it is pictorial, meaning that each character represents a concept.C. it is cursive, meaning that the letters are joined together.D. it is syllabic, meaning that each character denotes a syllable O Sicily
The Phoenician script differs from other ancient scripts like Linear-A, Cuneiform and Hieroglyphs in that it is alphabetic, meaning that each character represents a letter rather than a syllable or word. Therefore, the correct answer is option A.
The Phoenician script was developed in the ancient city-state of Phoenicia, which is now Lebanon. It was one of the earliest writing systems and was used to write the Phoenician language. The script was also adapted by other languages, such as Hebrew and Aramaic.
Unlike pictorial scripts like hieroglyphs, which used pictures to represent concepts, the Phoenician script used letters to represent sounds. This made it a more efficient system for recording language. The Phoenician script was also different from cursive scripts like Linear-A, which were written in a flowing, connected style. Therefore, the correct answer is option A.
For more about Cuneiform and Hieroglyphs:
https://brainly.com/question/23050058
#SPJ11
Assuming the sand dune (illustrated below) was deposited by wind currents 200 million years ago, which way was the wind blowing?Image: similar to the pair&share photo of the Jurassic Navajo Sandstone in Utah from the "Play in the Mud (and Sand)" lectureA) wind was blowing from the left to rightB) wind was blowing from right to leftC) wind was blowing both waysD) can't determine from the information given
The sand dune (illustrated below) was deposited by wind currents 200 million years ago, which way was the wind blowing wind was blowing from right to left. The correct answer is B) the wind was blowing from right to left.
To determine the wind direction, we need to analyze the sand dune's structure. Sand dunes have two distinct sides: the windward side and the leeward side. The windward side is the side facing the wind, and it has a gentle slope. The leeward side is the side sheltered from the wind, and it has a steeper slope.
In this case, we can see that the left side of the dune has a steeper slope, while the right side has a more gentle slope. This indicates that the wind was blowing from the right, carrying sand grains up the gentle slope on the right side of the dune. Once the wind reached the top of the dune, it lost its carrying capacity, causing the sand grains to fall and accumulate on the steeper left side of the dune, forming the leeward side.
So, considering the structure of the sand dune and the slopes, we can conclude that the wind was blowing from right to left 200 million years ago when the sand dune was deposited. The correct answer is B) the wind was blowing from right to left.
For more about deposited:
https://brainly.com/question/22697743
#SPJ11
Societies thrive in areas with many natural ______________.
Answer: Societies thrive in areas with many natural resources.
Explanation:
Natural Resources: Natural resources are materials or substances that occur naturally in the environment and can be used for economic gain. These resources can be divided into two categories: renewable and non-renewable resources.
Renewable resources include things like solar energy, wind power, hydroelectricity, and biomass, which can be replenished over time.
Non-renewable resources, such as fossil fuels (coal, oil, natural gas) and minerals (gold, silver, copper), are finite and can be depleted over time.
Areas with abundant natural resources such as fertile land, forests, minerals, and oil reserves have often attracted investment, trade, and migration, leading to economic growth and prosperity.
Read more about Natural resources:
https://brainly.com/question/1082081
why might this be? (hint: what processes in both living and dead trees produce co2 ?) tropical rain forests also produce co2 due to living trees' respiration and decomposition of dead trees. due to this fact, relative consumption of co2 is not as great as has been expected.
Tropical rain forests produce CO2 due to both the respiration of living trees and the decomposition of dead trees. This leads to a lower relative consumption of CO2 than is expected.
Both living and dead trees contribute to the production of carbon dioxide (CO2) through respiration and decomposition processes. Living trees release CO2 through cellular respiration, which is the process by which they use oxygen to convert sugars into energy. Dead trees also release CO2 as they decompose, either through the action of microorganisms or through physical processes like wind and erosion.
While it's true that tropical rainforests produce CO2 through respiration and decomposition, they also play an important role in removing CO2 from the atmosphere through photosynthesis. Trees absorb CO2 from the air and use it to build their cells and grow, releasing oxygen as a byproduct. This process helps to offset the CO2 produced by other sources, such as human activities.
However, the extent to which tropical rainforests are able to absorb and sequester CO2 depends on a variety of factors, including the density and diversity of the forest, the health of the trees, and the availability of nutrients and water. Additionally, deforestation and other human activities that destroy or disrupt rainforest ecosystems can greatly reduce their ability to act as carbon sinks.
For more such questions on decomposition, click on:
https://brainly.com/question/13353160
#SPJ11
The _____ ______ of the divide is the Rocky Mountains, and it is called the Continental Divide.
The highest point of the divide is the Rocky Mountains, and it is called the Continental Divide.
The Continental Divide is a long natural boundary that separates the rivers that flow westward from those that flow eastward in North America. The Rocky Mountains of the United States and Canada are its most notable feature. The Continental Divide, also known as the Great Divide, follows a winding route through the Rocky Mountains and across western North America. It extends from Alaska to Mexico, running through the United States and Canada.
The Great Divide runs along the top of the Rocky Mountains. It serves as a geographic boundary separating the continent's western and eastern parts. On the west of the Great Divide, all water drains into the Pacific Ocean. On the east side of the Great Divide, all water runs into the Atlantic Ocean. The height of the divide ranges from just a few inches to more than 14,000 feet above sea level.
Learn more about Rocky Mountains at https://brainly.com/question/30044306
#SPJ11
Light travels extremely fast through the universe. However, the speed of light is limited to about
300,000 km/s. Because of that, it takes sunlight 8.3 minutes to reach the Earth.
How long does it take light from the Sun’s surface to reach Mars (223 million km distance to the
Sun), Jupiter (777 million km) and Pluto (5,906 million km), respectively?
It takes about 12.5 minutes for light from the Sun's surface to reach Mars, approximately 43 minutes to reach Jupiter, and about 5.5 hours to reach Pluto, due to the varying distances between these planets.
About 300,000 km/s, or around 186,000 miles per second, is the speed of light. In less than 3 seconds, light can cover a distance of one million kilometres.Mars and the Sun are separated by 223 million kilometres. From the surface of the Sun to Mars, light travels at the speed of light in around 12.5 minutes.Since Jupiter is further from the Sun, light takes longer to reach it. As there are 777 million kilometres between the Sun and Jupiter, it takes light 43 minutes to reach Jupiter from the Sun's surface.Pluto is located in our solar system's outermost planets, 5,906 million kilometres from the Sun. Hence, itAs a result, light takes around 5.5 hours to travel from Pluto to the surface of the Sun.The universe's maximum speed limit is the speed of light. It is a fundamental law of nature and an important part of how we comprehend the cosmos.Optics is the study of how light moves through space and interacts with things.
learn more about Mars here:
https://brainly.com/question/644043
#SPJ1
which are the most common renewable energy resources used in the nordic nations? select all that apply. geothermal solar biomass hydroelectric
The most common renewable energy resources used in the Nordic nations are geothermal, solar, biomass, and hydroelectric.
Geothermal energy is the heat generated and stored beneath the Earth’s surface. It can be tapped and used for a range of applications including generating electricity. This resource is widely used in Nordic countries such as Iceland, Finland, and Norway.
Solar energy is a renewable resource that can be used to generate electricity through photovoltaic (PV) cells. Solar power is widely used in all Nordic countries as it can provide clean energy and reduce greenhouse gas emissions.
Biomass is a renewable energy resource that uses organic materials such as wood, animal waste, and plant material to generate electricity. In the Nordic countries, biomass is mainly used in the form of wood pellets and wood chips.
Hydroelectric power is generated when the energy of flowing water is converted into electricity. This renewable energy resource is commonly used in countries such as Sweden and Finland.
Overall, the Nordic nations have some of the highest rates of renewable energy usage in the world, with geothermal, solar, biomass, and hydroelectric being the most commonly used resources.
Know more about renewable energy here:
https://brainly.com/question/17373437
#SPJ11
the dominant surface winds from the subtropics to high latitudes are the question 63 options: trade winds. westerlies. geostrophic winds. polar easterlies.
The dominant surface winds from the subtropics to high latitudes are the westerlies.
What are westerlies?The winds that blow from west to east in the middle latitudes are known as westerlies. These are observed mainly between 30 and 60 degrees north and south of the equator. As the earth spins on its axis, the Coriolis effect causes the westerlies to appear as westerly winds.
How do westerlies occur?At around 30 degrees north and south of the equator, rising hot air creates an area of low pressure. Air flows away from these low-pressure areas toward areas of high pressure at around 60 degrees north and south of the equator.
Why are westerlies considered significant?The westerlies have a significant impact on the Earth's climate, and they are an essential element of the global circulation system. They play a crucial role in the movement of weather systems across the globe, including storms, hurricanes, and mid-latitude cyclones.
To know more about westerlies refer here
https://brainly.com/question/12533653#
#SPJ11
determine the 6 most common minerals in a granite and place them in descending temperature of crytsallization
The six most common minerals in a granite are quartz, feldspar, mica, amphiboles, pyroxenes and olivine,
listed in descending order of temperature of crystallization.
Quartz: crystallizes at 573°C
Feldspar: crystallizes at 790°C
Mica: crystallizes at 860°C
Amphiboles: crystallizes at 950°C
Pyroxenes: crystallizes at 1,070°C
Olivine: crystallizes at 1,430°C
Quartz is the most abundant mineral in granite and gives it its hardness and durability. It also gives granite its characteristic translucent appearance.
Feldspar is the second most abundant mineral in granite and can be further classified as either orthoclase or plagioclase. Orthoclase feldspar is typically pink or cream-colored, while plagioclase feldspar is typically white or gray. Feldspar is responsible for the distinctive flecks of color in granite.
To know more about minerals in a granite, refer here:
https://brainly.com/question/14797104
#SPJ11
how do present-day rivers compare to what those same rivers would have been like at the end of the glacial ages? multiple choice question.
Rivers today differ significantly from what they would have been like during the glacial ages. The rivers would have been wider, deeper, and more sinuous, with fewer meanders and a greater variety of aquatic species. Additionally, they would have had increased erosion and more sediment in the water. Correct answer is all of the above, option D
Additionally, there would have been more debris and sediment in the water, such as sand, gravel, and boulders, as well as a greater variety of aquatic species. The rivers of today are very different from what they would have been during the last glacial period. Most rivers would have been bigger and deeper at that period because of increased erosion brought on by more glacier runoff. Since that glacial melt water is more strong and swift than current rivers, they would also be more sinuous and have fewer meanders.
Know more about aquatic species here:
https://brainly.com/question/14127501
#SPJ11
Correct question would be " how do present-day rivers compare to what those same rivers would have been like at the end of the glacial ages? options could include a) wider, deeper, and more sinuous; b) fewer meanders and a greater variety of aquatic species; c) increased erosion and more sediment in the water; or d) all of the above"
for a surface low pressure system to intensify, where must the upper-level trough be located relative to the surface low? group of answer choices north of the surface low south of the surface low west of the surface low east of the surface low directly above the surface low
For a surface low pressure system to intensify, the upper-level trough must be located to the west of the surface low. Therefore the correct option is option C.
A low-pressure system is a location on Earth's surface where the air pressure is lower than that of surrounding locations. As air moves away from a low-pressure area, it rises and cools, generating clouds and potentially precipitation.
The cyclonic flow of the air around a low-pressure area, where the air is flowing counterclockwise in the Northern Hemisphere, is another feature of a low-pressure area.
The airflow toward the low-pressure area at the surface is pulled inward and upward, resulting in air rising and the production of clouds, rain, and other weather events. Therefore the correct option is option C.
For such more question on surface:
https://brainly.com/question/1406428
#SPJ11
The following question may be like this:
For a surface low pressure system to intensify, where must the upper-level trough be located relative to the surface low? group of answer choices
north of the surface low
south of the surface low
west of the surface low
east of the surface low
directly above the surface low
__________ extend into the water to reduce the energy from waves thereby reducing their power. They cause a break in the longshore current.
Breakwaters extend into the water to reduce the energy from waves thereby reducing their power. They cause a break in the longshore current.
A breakwater may be a natural or man-made structure that is intended to act as a barrier against the action of waves. Breakwaters have various forms and designs, but they are typically made of rock, concrete, or other durable materials that can withstand the forces of waves. Breakwaters can help to control the direction of longshore currents by creating a barrier that redirects the flow of water. They cause a break in the longshore current, which can help to reduce erosion along the shoreline. They can also be used to protect harbors and other marine structures from the damaging effects of waves and currents.
Learn more about breakwater here: https://brainly.com/question/30458967
#SPJ11
what element is missing from this diagram of the rock cycle? compacting and cementing sediment sedimentary rock weathering and erosion
The element that is missing from the diagram of the rock cycle is metamorphism.
What is the rock cycle?
The rock cycle is a natural process by which rocks are transformed into other forms. In simpler terms, the rock cycle is the transformation of one type of rock into another type of rock via numerous geological processes.
The rock cycle is composed of three main phases: Igneous rocks that form from molten rocks, Sedimentary rocks that form from weathered and eroded debris and Metamorphic rocks that form from heat and pressure.
What is metamorphism?
Metamorphism is a geological process that involves the transformation of pre-existing rocks into a different kind of rock.
Metamorphism can be caused by an increase in temperature, pressure, or both. In metamorphism, heat and pressure together cause changes in the mineral structure of the rocks, leading to the formation of metamorphic rocks.
In summary, the correct answer is Metamorphism is missing from the diagram of the rock cycle.
To know more about Metamorphism, refer here:
https://brainly.com/question/1366827
#SPJ11
california has 2 major underground basins one in owens valley what is the geological name for them? v what is the geologic name for them?
Answer:
the basin and range
Explanation:
California has two major underground basins: the Owens Valley Basin and the Salinas Valley Basin. The Owens Valley Basin is a tectonic depression in the Great Basin province of California, named for its location in the Owens Valley region. The Salinas Valley Basin is an underground sedimentary basin located in California's Central Coast region. It is composed of sandstone and shale deposits.
The Great Basin Province is a major physiographic province that covers much of the interior western United States and southwestern Canada. It is composed of four tectonic plates—the Sierra Nevada–Great Valley block, the Pacific block, and consists of numerous valleys and basins, including the Owens Valley and Salinas Valley basins.
The rocks found in the Great Basin Province are sedimentary and range from several million years to over 200 million years old. So two major basins are the Owens Valley Basin and the Salinas Valley Basin.
Know more about California here:
https://brainly.com/question/30050163
#SPJ11
you are hiking in your favorite forest when you encounter a surface that appears to have very fine directional scratches in it. what are these features?
Answer:
The fine directional scratches that appear on a surface could be glacial striations. Glacial striations are scratches or gouges made in bedrock by rock fragments that are embedded in the base of a glacier. As the glacier moves over the bedrock, these rocks act like chisels, carving and scraping the rock beneath them. The scratches or grooves left behind can reveal the direction in which the glacier was moving.
describe the hydrologic cycle, rock cycle, and how the biosphere exchange matter with the other spheres.
The hydrologic cycle is the continuous movement of water from the atmosphere to the land and back to the atmosphere again. Water evaporates from the surface of the Earth and rises into the atmosphere, then condenses and forms clouds, and finally, falls as rain and snow.
The rain and snow then drains back to the surface, either infiltrating into the soil or flowing into rivers, streams, and lakes. The water then evaporates again and the cycle continues. The rock cycle is the continuous process by which sedimentary, igneous, and metamorphic rocks are formed.
Sedimentary rocks are formed when particles of sediment are compressed and cemented together over time. Igneous rocks form when molten material, or magma, cools and crystallizes. Metamorphic rocks form when existing rocks are exposed to extreme temperatures and pressures and transform into new types of rocks.
The biosphere exchange matter with the other spheres through a variety of processes. For example, organisms in the biosphere take in energy from the sun, matter from the lithosphere, and water and carbon dioxide from the atmosphere.
Plants in the biosphere also take in carbon dioxide from the atmosphere and release oxygen as a by-product. All of these exchanges are essential to the survival of organisms and the functioning of the biosphere.
TO KNOW ABOUT rock cycle:
https://brainly.com/question/29767269
#SPJ11
in addition to the mineral above, this rock also contains quartz, plagioclase, muscovite, and kyanite. based on your observations and the mineral assemblage, what kind of rock is this? choose one: a. phyllite b. gneiss c. quartzite d. slate e. schist
Phyllite is a kind of rock that also contains quartz, plagioclase, muscovite, and kyanite. Thus, option a is correct.
Phyllite is generally located black to gray, or light greenish-gray in color inside the earth. It has a wrinkled or wavy formation as its foliation. Phyllite is a stable and very soft rock that is formed naturally by the wind. It is mainly used by cemetery markers in buildings.
Phyllites are most typically found in the Dalradian metasediments of northwest Arran areas. Quartz and feldspar are discovered in large amounts in phyllite. Phyllite has a reasonable preference to break into sheets. Tredorn Phyllite and Woolgarden phyllites are found in North Cornwall along the banks of the rivers.
To learn more about Phyllite
https://brainly.com/question/984436
#SPJ4
pure loam is considered to be the best kind of soil for a farm or garden and is often defined as a soil with roughly equal proportions of sand, silt, and clay. is that what the diagram shows?
Yes, pure loam is considered to be the best kind of soil for a farm or garden and is often defined as a soil with roughly equal proportions of sand, silt, and clay.
Loam soil is soil that is made up of an even mix of sand, silt, and clay. Loam is a form of soil that is often regarded as the perfect garden soil. It has a granular structure, which makes it easy to work with, and it is very fertile because it contains equal amounts of sand, silt, and clay.
Loam soil contains a lot of organic matter and is well-aerated, so it is ideal for cultivating a variety of crops. The diagram given below shows that pure loam is considered to be the best kind of soil for a farm or garden and is often defined as a soil with roughly equal proportions of sand, silt, and clay.
As a result, it can be concluded that the diagram shows that pure loam is regarded as the ideal soil type for a farm or garden.
For such more question on soil:
https://brainly.com/question/946875
#SPJ11
pulque production is increasing in the teotihuacan valley. true or false?
The statement pulque production is increasing in the teotihuacan valley is true as there is an increase in production.
In Mexico, especially in the central region, which includes the Teotihuacan Valley, the production of pulque is a traditional activity. For thousands of years, the maguey (agave) plant's sap has been used to make pulque, a fermented alcoholic beverage.
Due to competition from other alcoholic beverages and the urbanization of rural areas, pulque production has decreased in recent years, but there are still many small-scale producers in the area who continue to make pulque using traditional techniques.
To know more about teotihuacan valley here
https://brainly.com/question/28501226
#SPJ4
When rivers reach flood stage and overflow their banks, a large amount of __________ gets mixed in suspension and deposited.
When rivers reach flood stage and overflow their banks, a large amount of sediment gets mixed in suspension and deposited.
What happens when rivers reach flood stage?Rivers can cause great damage if they reach flood stage. The following are some of the most prevalent problems: Increased water velocity, which causes the erosion of stream banks and bases in some areas, exacerbating flood damage; Sediment and debris deposition along watercourses, which may create a hazardous and unstable river condition in the future. Some of the sediment deposits will eventually wash away as the water flow decreases.
However, the bulk of the sediment will stay where it has settled. Riverbanks, islands, and bars, as well as the river's bed, are all areas where sediment may collect.
Learn more about Rivers here: https://brainly.com/question/17667168
#SPJ11
this is a map view of a fault. you are looking down on the fault from above. a) what type of fault is it b) what type of forces are involved c) how would you describe the relative lateral motion?
A.) The type of force that causes it is the compressive force that leads to the relative lateral motion towards each other.
B.) A reverse fault is a type of fault where one block of rocks moves vertically above the other in response to compression.
C.) The rocks move vertically along the fault plane, with the block on one side moving up and the block on the other side moving down.
Reverse faults are characterized by a steep angle of the fault plane and are commonly found in regions of continental crust subjected to compression, such as regions of plate convergence.
The given image shows a reverse fault because the block on the right has been pushed up by the block on the left.
Types of forces involved in a reverse fault: When the compression force pushes two blocks of rock towards each other, it creates a reverse fault.
For such more question on lateral:
https://brainly.com/question/30483578
#SPJ11
units a through k are sedimentary layers. l and m are intrusive igneous bodies. the surface of erosion below layer h represents a(n) period of time of about 100 years. true false
units a through k are sediment layers. l and m are intrusive igneous bodies. the surface of erosion below layer h represents a(n) period of time of about 100 years. is True
Long-term accumulations of sediment and debris that land on the earth's surface or in bodies of water typically result in the formation of sedimentary strata. Each layer can represent a distinct geological epoch or timeframe, based on the type of rock and the fossils found in it.The amount of time that a layer was exposed to erosion, weathering, or other geological processes is represented by the surface of erosion beneath it. The length of that period, however, will vary depending on a number of variables, including the type of rock, the environment, the area, and the level of erosion.
learn more about sediment here:
https://brainly.com/question/30080576
#SPJ1
Define the term stressor??
something that causes a state of strain or tension.
Explanation:
"stressors can place a tremendous burden on relationships"
Answer: refers to a stress which stretches rocks in two opposite directions. the rocks become longer in a lateral direction and thinner in a vertical direction.
an important result of tensile stress is jointing in rocks.
the primary reason why north america has a high number of, and certainly much more than its global share, severe thunderstorms, is the:
The primary reason why North America has a high number of severe thunderstorms is the collision of air masses.
North America is located in an area where cold air from Canada meets warm, moist air from the Gulf of Mexico. This creates a boundary called a "front" where the two air masses collide, causing the warm air to rise rapidly and form thunderstorms. This collision of air masses occurs frequently in North America, leading to a high number of severe thunderstorms. Additionally, the geography of North America, with its varied topography and large bodies of water, creates ideal conditions for the formation of thunderstorms.
To know more about collision click here:
brainly.com/question/13138178
#SPJ4