Answer:
B. - Direct Memory Access (DMA)
Explanation:
...
Direct Memory Access (DMA) is the technique to free up the CPU by allowing device controllers to independently transfer data between the device and main memory. Thus, option B is correct.
What is Direct Memory Access?Direct memory access is a computer system feature that allows some hardware subsystems to access main system memory without relying on the central processor unit.
Direct memory access (DMA) is the method of transmitting data without using the CPU. It is frequently used to transport data to and from input/output devices. To manage the transfer, a second DMA controller is necessary.
DMA is a mechanism that allows an input/output (I/O) device to transmit or receive data directly to or from main memory, bypassing the CPU to speed up memory operations. A chip known as a DMA controller manages the process (DMAC).
Therefore, option B is correct.
Learn more about the Direct Memory Access, refer to:
https://brainly.com/question/7218477
#SPJ5
Write short note on:
i) keyboard
ii) Web camera
What software programming language was first
used to power the Internet (.com, .net)?
Answer:
the answer should be .com, because the very first domain was Symbolics.com
Explanation:
hope this helps, have a great day.
4. What is an Abacus?
Explanation:
an abacus is a simple device for calculating, consisting of a frame with rows of wires or grooves along which beads are slid.
Draw a system flowchart illustrating the steps performed by an operating system as it executes the instruction to back up a disk on a single-user computer system.
The flowchart's pseudo code is as follows:
The command BACKUP user issues through the user interface.UI executes the awakening File Manager instruction.File Manager resolves the address of a backup file that wakes up Device Manager.Device Manager opens the drive access path to back files in the Memory Manager I/O buffer that reads the file (or part of the data).In the I/O buffer, Memory Manager assigns memory to the processor manager.Processor Manager loads the I/O buffer memory file, and File Manager awakens.File Manager determines the document address be copied into the Processor Managers new disc.The Device Managers, Processor Manager copies memory to the I/O buffer.This device manager enables you to open a drive access path where a new disc awakens file manager will be duplicated by the I/O buffer.File Manager decides whether the file is copied completely If yes if you are jumping to point 11, you decide the next area of the file that will be backed up and Device Manager is returning to point 4.File Manager decides if this is the last backup item, if not, it wakes up Manager of Processor Activates Processor Manager for sending interface File N is backed up for a client can jump back to point 3 if affirmative. The Processor Manager activates the user interface to send the user message 'All files have been backed up'.Learn more:
brainly.com/question/17373574
brainly.com/question/13152070
45. _____ is used to create an object. a. Class b. constructor c. User-defined functions d. In-built functions
Answer: B
Explanation: A constructor is a special method of a class or structure in object-oriented programming that initializes a newly created object of that type. ... Instead of performing a task by executing code, the constructor initializes the object, and it cannot be static, final, abstract, and synchronized.
In computer programming, a resource which is used to create an object is called: B. constructor.
What is a constructor?A constructor can be defined as a special method that is designed and developed to enable programmers create and initialize objects in Java programming.
This ultimately implies that, a constructor is a resource which can used to create an object in computer programming.
Read more on constructor here: https://brainly.com/question/26914047
Who made computer ? Which year?
Answer:
The first computer that resembled the modern machines we see today was invented by Charles Babbage between 1833 and 1871.
Answer:
Charles Babbage in 1991
When it comes to memory, why is it important to have enough storage space on a hard drive when using many RAM intensive programs?
Answer:
Memory and storage are important concepts to master in Information Technology. ... This type of memory is volatile which means that the actual data disappears when the computer loses power. Because memory needs to be much faster than storage, it is rather more expensive than storage per GB.
Explanation:
in media literacy,
how does media influence public? and the press
⚫ analyze or compare the influences of social media
⚫ analyze the ethics or journalist, news outlets, etc
what is mean by computers
Saving means
A) Copying data from memory to disk
B) Copying data from disk to
memory
C) Preserving a program
D) Storing data in a program
Answer:
To copy data from a temporary area
Comparison
Cloud computing and parallel processors
Anwser is 2/3
Explanation:
Run the program and observe the output to be: 55 4 250 19. Modify the numsInsert function to insert each item in sorted order. The new program should output: 4 19 55 250.
#include
#include
using namespace std;
void numsInsert(vector& numsList, int newNum) {
unsigned int i;
for (i = 0; i < numsList.size(); ++i) {
if (newNum < numsList.at(i)) {
// FIXME: insert newNum at element i
break; // Exits the for loop
}
}
// FIXME: change so executes if higher number NOT found
// Change "true" to "i == ??" (determine what ?? should be)
if (true) { // No higher number was found, so append to end
numsList.push_back(newNum);
}
}
void numsPrint(const vector& numsList) {
unsigned int i;
for (i = 0; i < numsList.size(); ++i) {
cout << " " << numsList.at(i) << endl;
}
}
int main() {
vector numsList;
numsInsert(numsList, 55);
numsInsert(numsList, 4);
numsInsert(numsList, 250);
numsInsert(numsList, 19);
numsPrint (numsList);
return 0;
}
Answer:
#include <iostream>
#include <vector>
using namespace std;
void numsInsert(vector<int>& numsList, int newNum) {
unsigned int i;
for (i = 0; i < numsList.size(); ++i) {
if (newNum < numsList.at(i)) {
// FIXME: insert newNum at element i
numsList.insert(numsList.begin() + i, newNum);
break; // Exits the for loop
}
}
// FIXME: change so executes if higher number NOT found
// Change "true" to "i == ??" (determine what ?? should be)
if (i == numsList.size()) { // No higher number was found, so append to end
numsList.push_back(newNum);
}
}
void numsPrint(const vector<int>& numsList) {
unsigned int i;
for (i = 0; i < numsList.size(); ++i) {
cout << " " << numsList.at(i) << endl;
}
}
int main() {
vector<int> numsList;
numsInsert(numsList, 55);
numsInsert(numsList, 4);
numsInsert(numsList, 250);
numsInsert(numsList, 19);
numsPrint(numsList);
return 0;
}
Explanation:
List the resulting array after each call of the merge method. Indicate the number of character-to-character comparisons made for each call to merge (line 22 of the merge method at the end of the assignment). Sort the following array of characters into alphabetical order: C Q S A X B T.
01 public static void mergesort (char[] a, int i, int r){
02
03 if (1 >= r) {
04 return;
05 }
06 int middle = (1+r)/2;
07 mergesort(a, l, middle);
08 mergesort(a, middle+1, r);
09 merge(a, l, middle, r);
10 }
11
12 public static void merge (char[] a, int i, int m, int r){
13
14 //copy lower half of the array into b
15 char [] b = new char[m-1+1];
16 for (int i = 0; i <= m-1; i++ ) {
17 b[i] = a (1+i);
18 }
19
20 int i = 0, j m+1, k = 1;
21 while (i <= m-1 && j <= r ) {
22 if (a[j] < b[i]) {
23 a[j];
24 k += 1;
25 j += 1;
26 } else {
27 a[k] b[i];
28 k += 1;
29 i += 1;
30 }
31 }
32 while (i <= m-1) {
33 a[k] b[i];
34 k += 1;
35 i += 1;
36 }
37 while ( j <= r ) {
38 a[k] a[j];
39 k += 1;
40 j += 1;
41 }
42 }
Answer:
40j
Explanation:
the no. divided by one is that no.
what is web browser give answerwh
at is web browser
Answer:
A software application used to access information on the World Wide Web is called a Web Browser.
Explanation:
When a user requests some information, the web browser fetches the data from a web server and then displays the webpage on the user's screen.
Juan is a network administrator and must set up a VPN for his company's network. To allow safe communication, he should
select Control Panel, then Network Protocols, then Internet
select the radio button, then change the adapter settings protocol
select the Security tab, then PPTP, and then Allow Protocols
select Set Up a Public Connection, then Disable Protocols
Answer:
select Control Panel, then Network Protocols, then Internet
Explanation:
Seeing as Juan is a network admin, he has access to the programs of the computer. Being tasked with setting up a VPN, he must go to the control panel, then network protocols (to see the network rules, per say), then the internet tab to finally set up the VPN.
To allow safe communication, Juan must select control panel then, network protocols, and then internet. Therefore, option A is correct.
What is VPN ?You can interact secretly and securely within your corporation using a virtual private network (VPN), which is an extension of a company's intranet over the preexisting structure of either a public or private network.
The i5/OS operating system is utilised by both businesses, and a VPN connection can give them the protection they require to communicate between their respective networks. Compared to using conventional non-switched lines, creating a VPN is more cost-effective.
To allow a safe communication, the network operator should allow the internet protocol to interpret and which can be activated from the control panel. Hence, option A is correct.
Find more on VPN:
https://brainly.com/question/29432190
#SPJ3
2. Which of these Is NOT part of the definition of Electricity?
A. Ability to do work
B. Closed Circuit
C. Power Supply
D. Movement of electrons
Answer:
B. closed circuit
Explanation:
please follow me
hope it helps you
what is computer virus
Answer:
A type of malicious code or program written to alter the way a computer operates and is designed to spread from one computer to another.
Once a virus has successfully attached to a program, file, or document, the virus will lie dormant until circumstances cause the computer or device to execute its code. In order for a virus to infect your computer, you have to run the infected program, which in turn causes the virus code to be executed.
Answer:
Computer virus :
In more technical terms, a computer virus is a type of malicious code or program written to alter the way a computer operates and is designed to spread from one computer to another. A virus operates by inserting or attaching itself to a legitimate program or document that supports macros in order to execute its code.
Which of these areas of technology best classifies television?
a. Information and Communication
b. Bio-related and Agricultural
c. Medical
d. Environmental
e. Production, which includes manufacturing and construction
f. Transportation
g. Energy and Power
h. Nanotechnology
Answer:
a. Information and Communication
h. nanotechnology
Explanation:
[tex].[/tex]
Please answer this, don't skip please. I would really appreciate if you had knowledge over this question and helped out :)
1) The tag is the second of two main parts of a web page. The information between the opening and closing tag is seen by web page visitors in the browser window. True or False
2) The area is the first of two main parts of a web page. The header is where the operation code resides. True or False
3) The next tag is the tag - the head is the first of two main parts of a web page. The head is where the operation code resides. True or False
Answer:
1) they are only visible to the to the person/people who are running the website. therefore the answer to that statement is false.
2) they operation code of a website resides at the end of a address, therefore that statement is also false
Explanation:
"Desktop" is a computer term that refers to:
a) The initial screen showing icons for folders, files, and applications
b) The part of your work area where the computer monitor sits
c) Something that can and should be ignored by most users
d) The st of all the contents on a particular computer
e) None of the above
1 BACK
Answer:
a) The initial screen showing icons for folders, files, and applications
"Desktop" is a computer term that refers to: a) The initial screen showing icons for folders, files, and applications.
What is a computer?
A computer can be defined as a programmable-electronic device that is designed and developed to receive data in raw form as an input and then processes these data into an output (useful information) that could be used by an end user.
What is a computer desktop?
A computer desktop refers to the initial screen or homepage that automatically comes up after a computer successfully completes a boot-up process. Thus, a computer desktop is considered to e the homepage of a computer.
Furthermore, a computer desktop can be used to display or show the icons for the following items:
FilesRecycle binFoldersSoftware applicationRead more on computer here: https://brainly.com/question/959479
Most shop accidents are caused by?
Answer:Most shop accidents are caused by÷
liftingpoor light trips and fallsstressdangerous materialsact of shop violencedehydrationextreme tirednessWhen it comes to different ways of storing data on the device in a cross-platform manner, what is convenient about both native iOS and Android platforms?
a. they both provide secure file i/o
b. they both provide key-value, file i/o and sqlite data storage
c. the both provide the exact same system calls, since both platforms rely on ARM processors
d. they both provide the exact same APIs, regardless of language used
Suppose you are asked to design a rotating disk where the number of bits per track is constant. You know that the number of bits per track is determined by the circumference of the innermost track, which you can assume is also the circumference of the hole. This, if you make the hole in the center of the disk larger, the number of bits per track increases, but the total number of tracks decreases. If you let r denote the radius of the platter, and x · r the radius of the hole, what value of x maximizes the capacity of the disk?
Answer:
suppose i was i would tell them i dont know and walk away
Explanation:
in thoery this is correct
you said suppose so i answerd
there is no use in reporting or getting this taken down
nether is it right
im not stealing points
Because in thoery its an answer
THIS IS MY PROTEST
_ is an environment where processors are embedded in objects that communicate with one another via the Internet or wireless networks.
The right answer will be "The Internet of Things (IoT)".
Connecting computers systems, electromechanical machinery as well as digital ones with distinctive identifications as well as the possibility of transference of information through the internet without interactivity as well as people.Such an IoT system would be a collection of web-enabling connected devices which employ embedded subsystems, particularly CPUs, captors, and networking gear, to gather as well as transmit information from their surroundings and execute upon that.
Learn more about IoT here:
https://brainly.com/question/19995128
_____________ is driving a complete reanalysis of what information is collected and how it is presented, navigated, and used internally.
why do many webpages use graphical design and images
Answer:
Many web pages use graphical designs and images because people are drawn more to images and graphics than just plain text.
What are the things you needed to create a bootable USB Windows Installera
Answer:
RUFUS
Explanation:
Try installing rufus software and burn the ISO file on your USB by choosing appropriate partition scheme MBR or GBT. Usually MBR works for all computers but GPT is for new systems with latest technology.
Suppose that a particular algorithm has time complexity T(n) = 3 \times 2^nT(n)=3×2 n and that executing an implementation of it on a particular machine takes tt seconds for nn inputs. Now suppose that we are presented with a machine that is 64 times as fast. How many inputs could we process on the new machine in tt seconds?
.
Where should you select to create a bibliography citation source?
A. At the end of the text you want to cite
B. At the top of the page
C. At the beginning of the text you want to cite
D. At the bottom of the page
Software engineer is responsible for defining the level of maturity the software program must perfom at in order to declare software test
a. True
b. False
Answer:
true
Explanation:
Hope, it helps to you
True or False, In adversarial searching, agents using the MiniMax algorithm always select the state that has the highest guaranteed net value.
Answer:
True
Explanation:
The MiniMax algorithm computes the MiniMax decision from the current state. The MiniMax algorithm always is especially known for its usefulness in calculating the best move in two-player games where all the information is available