If 3.57 g of barium sulfate is formed, how many grams of sodium sulfate reacted

It is unclear which specific element you are referring to in your question. However, if we are talking about the periodic table of elements, the first person to attend to arrange the elements was Dmitri Mendeleev in the year 1869.

Mendeleev was a Russian chemist who noticed patterns in the properties of elements and arranged them in order of increasing atomic weight. He left gaps in his periodic table for elements that had not yet been discovered, and even predicted the properties of these yet-to-be-discovered elements based on their position in the table.

Mendeleev's work revolutionized the field of chemistry and led to a better understanding of the nature of elements and their relationships to one another. Today, the periodic table is an essential tool for scientists and students alike in understanding the properties and behavior of chemical elements.

To know more about periodic table of elements into battle refer here

brainly.com/question/17105472#

#SPJ11

Viewing the moon on the 7th day of the lunar cycle, 35% of the the lunar surface would be illuminated.

The moon is in its first quarter phase on the seventh day of the lunar cycle, which makes it seem as a half-circle in the sky. This occurs because the sun's surface is lighted exactly 50% of the time at this time.

The moon's other half was still completely opaque. Different regions of the moon will be illuminated on any given day depending on the moon's phase, which changes over the course of the lunar cycle.

On the seventh day of the cycle, when the moon will be in its first quarter phase, just half of the lunar surface will be fully illuminated by the sun.

Learn more about lunar cycle:

https://brainly.com/question/31453214

#SPJ4

The amount of HCl(aq) required to ensure that it is not the limiting reactant when reacting with 5.0g of MgO(s) depends on the mole ratio of the reaction.

The mole ratio of the reaction is 1 mole of HCl for every 1 mole of MgO, therefore, 0.5 moles of HCl is required for the reaction.

To determine the volume of HCl(aq) required for the reaction, the molarity of the solution must be known. Assuming that the molarity of the solution is 2 mol/L, the required volume of HCl(aq) would be 0.5 moles/2 mol/L = 0.25 L or 250mL of HCl(aq).

To ensure that HCl(aq) is not the limiting reactant, at least 250 mL of HCl(aq) should be used in the reaction.

Know more about  Mole ratio here

https://brainly.com/question/15288923#

#SPJ11

A greater speed of particles in a container will lead to an increase in temperature, pressure, potential phase changes, and possibly container expansion if the container is not rigid.

If there is a greater speed of particles in a container, the following changes will occur:

1. Increase in temperature: Faster-moving particles will have greater kinetic energy, which will result in an increase in the temperature of the system.

2. Increase in pressure: As the particles move faster, they will collide more frequently with the walls of the container, exerting a greater force. This leads to an increase in pressure.

3. Potential phase change: If the increase in temperature is significant enough, a phase change may occur, such as a solid melting into a liquid or a liquid evaporating into a gas.

4. Expansion of the container (if not rigid): If the container is not rigid, the increased pressure may cause it to expand or deform.

To summarize, a greater speed of particles in a container will lead to an increase in temperature, pressure, potential phase changes, and possibly container expansion if the container is not rigid.

To know more about speed of particles refer here: https://brainly.com/question/31184765#

#SPJ11

Approximately 91.2 calories of heat are needed to raise the temperature of 125.0g of lead from 17.5°C to 41.0°C.

To calculate the heat in calories needed to raise the temperature of 125.0g of lead from 17.5°C to 41.0°C, we'll use the specific heat formula and convert Joules to calories. The formula is:

q = m * C * ΔT

where q represents the heat absorbed, m is the mass of the substance (in grams), C is the specific heat capacity (in J/g°C), and ΔT is the change in temperature (in °C).

Step 1: Calculate the change in temperature (ΔT).
ΔT = Final temperature - Initial temperature
ΔT = 41.0°C - 17.5°C
ΔT = 23.5°C

Step 2: Use the specific heat formula.
q = m * C * ΔT
q = 125.0g * 0.130J/g°C * 23.5°C
q = 381.625J

Step 3: Convert Joules to calories.
1 calorie = 4.184 Joules
q = 381.625J / 4.184J/cal
q ≈ 91.2 calories

So, approximately 91.2 calories of heat are needed to raise the temperature of 125.0g of lead from 17.5°C to 41.0°C.

To know more about temperature, visit:

https://brainly.com/question/29133754#

#SPJ11

The new volume of the tire is 15.6 L if the temperature is increased from 22° C to 34°C if the previous volume was 15 L.

The relation between pressure and volume in a system is explained by Charles's Law. It states that the temperature is inversely proportional to the volume in the system. It is expressed as:

[tex]T_2V_1=T_1V_2[/tex]

where T is the temperature

V is the volume

with no change in pressure and a number of moles of gases.

Given in the question,

[tex]V_1[/tex] = 15 L

[tex]T_1[/tex] = 22°C = 295 K

[tex]T_2[/tex] = 34°C = 307 K

307 * 15 = 295 * [tex]V_2[/tex]

[tex]V_2[/tex] = 15.6 L

Learn more about Charle's Law:

https://brainly.com/question/16927784

#SPJ4

Protein is the main nutrient that helps in the repair of tissue. Protein provides the amino acids that the body needs to build and repair cells and tissues. Other nutrients that aid in tissue repair include carbohydrates, fats, vitamins, and minerals.

The approximate date of the next full moon after January 2 would be around January 9 or 10.

The approximate date of the next full moon after January 2, which is a third quarter moon, can be determined by understanding the lunar cycle. The lunar cycle, also known as the moon's phases, takes approximately 29.5 days to complete.

The cycle starts with the new moon, then progresses through the waxing crescent, first quarter, waxing gibbous, full moon, waning gibbous, third quarter, and finally the waning crescent before returning to the new moon.

Since January 2 is a third quarter moon, we can estimate the remaining days in the lunar cycle until the next full moon. The third quarter moon marks the transition from the waning gibbous to the waning crescent phase, which is about 3/4 of the way through the lunar cycle.

From the third quarter moon, there are still the waning crescent, new moon, waxing crescent, first quarter, and waxing gibbous phases to go through before reaching the full moon. These phases take approximately 1/4 of the lunar cycle, which is about 7 to 8 days.

Taking this into consideration, the approximate date of the next full moon after January 2 would be around January 9 or 10.

To know more about full moon, visit:

https://brainly.com/question/31392459#

#SPJ11

The correct answer is C. 7.0. The isolectric point for this molecule is 7.0.

First, list the pka states that the tripeptide glycylarginylglutamate which can be found

pKa_1 = 2.1

pKa_2 = 4.1

pKa_3 = 9.8

pKa_4 = 12.5

The tripeptide, Ala-Arg_Asp. The three peptide bonds that are derived from the three amino acids are called tripeptides. A few examples of tripeptides are glutathione, Eisenin, GHK-Cu, etc. tripeptides are most commonly used for improving the look of ageing signs in the skin. Now it is necessary to find the isoelectric point (pI)

pl = SUM(pKa_1 + ... + pka_n)/n

pl = (2.1 + 4.1 + 9.8 + 12.5)/4

pl = 7.1 which is approximately 7.0.

The isolectric point for this molecule is 7.0.

To learn more about tripeptide check the link below-

https://brainly.com/question/28295128

#SPJ4

Complete question-

The tripeptide glycylarginylglutamate contains four ionizable groups with pKas of 2.1, 4.1 9.8, and 12.5. Calculate the pI for this molecule.

A. 3.1

B. 6.4

C. 7.0

D. 8.3

E. 7.3

The limiting reactant in the chemical reaction is O₂ because because the O₂ contains the higher starting mass. The correct option is D.

The chemical equation is as :

2H₂ + O₂  --->  2H₂O

The mass of the H₂  = 0.4 g

The molar mass of the H₂  = 2 g/mol

The moles of the H₂  = mass / molar mass

The moles of the H₂  = 0.4 / 2

The moles of the H₂  = 0.2 mol

The mass of the O₂  = 1.8 g

The molar mass of the O₂  = 32 g/mol

The moles of the O₂  = mass / molar mass

The moles of the O₂  = 1.8 / 32

The moles of the O₂  = 0.056 mol

2 moles of H₂  react with 1 mol of O₂

0.056 mol of O₂ react with = 2 × 0.056 = 0.112 mol of H₂

The O₂ is the limiting reactant. The correct option is D.

To learn more about limiting reactant here

https://brainly.com/question/31897248

#SPJ1

Assuming ideal gas behavior, the pressure in the winter at -30.0 °C would be approximately 166.3 kPa.

The pressure of a gas is directly proportional to its temperature, according to the ideal gas law.

Therefore, if the temperature of the gas inside a car tire changes, the pressure will change as well, assuming the volume remains constant.

To solve this problem, we can use the combined gas law, which relates the pressure, temperature, and volume of a gas. The formula is:

[tex]P1/T1 = P2/T2[/tex]

where P1 and T1 are the initial pressure and temperature, respectively, and P2 and T2 are the final pressure and temperature.

Using this formula, we can solve for the final pressure as follows:

[tex]P2 = (P1*T2)/T1[/tex]

Plugging in the values given in the problem, we get:

[tex]P2 = (310 kPa * (-30.0 + 273.15) K) / (25.0 + 273.15) K[/tex]

P2 = 166.3 kPa

Therefore, the pressure inside the car tire in winter at -30.0 °C is 166.3 kPa. This represents a decrease in pressure compared to the summer pressure of 310 kPa.

It is important to note that the ideal gas law assumes that the volume remains constant, which may not be the case in real-world situations where the volume of a tire can change due to various factors such as wear and tear.

For more such questions on pressure, click on:

https://brainly.com/question/24719118

#SPJ11

The chemical equation for KOH dissociating in water to form ions is:

[tex]\rm KOH (aq) \rightarrow K^+(aq) + OH^-(aq)[/tex], which shows that KOH is a base.

A chemical equation is an illustration of a chemical reaction's reactants and products.

Equation for the dissociation of KOH:

[tex]\rm KOH (aq) \rightarrow K^+(aq) + OH^-(aq)[/tex]

In the above mentioned reaction, potassium ions ([tex]\rm K^+[/tex]) and hydroxide ions ([tex]\rm OH^-[/tex]) are generated by the dissociation of KOH.

Therefore, KOH is a base because it produces hydroxide ions ([tex]\rm OH^-[/tex]) when it dissociates in water.

Learn more about Chemical Equation here:

https://brainly.com/question/28294176

#SPJ4

The balanced molecular reaction for the reaction between HNO₂ and Ca(OH)₂ is:

2HNO₂(aq) + Ca(OH)₂(aq) -> 2H₂O(l) + Ca(NO₂)₂(aq)

The balanced molecular reaction for the combination of a weak acid with a strong base involves the neutralization reaction between the acid and the base. In this case, the weak acid is nitrous acid (HNO₂) and the strong base is calcium hydroxide (Ca(OH)₂).

When the two compounds are mixed together, the hydroxide ions (OH⁻) from the base react with the hydrogen ions (H+) from the acid to form water. However, since nitrous acid is a weak acid, it only partially dissociates in water to form hydrogen ions and nitrite ions (NO₂⁻). Therefore, the reaction requires the use of two molecules of HNO₂ to react with one molecule of Ca(OH)₂.

Thus balanced equation for the reaction is:

2HNO₂(aq) + Ca(OH)₂(aq) -> 2H₂O(l) + Ca(NO₂)₂(aq)

This means that two molecules of HNO₂ react with one molecule of Ca(OH)₂ to produce two molecules of water and one molecule of calcium nitrite (Ca(NO₂)₂). The balanced equation shows that the number of atoms of each element is the same on both sides of the equation, which means that the reaction is balanced and follows the law of conservation of mass.

To learn more about strong base visit:

https://brainly.com/question/7245674

#SPJ11

The molarity is 0.37 M

The molality is 1.71 m

Molarity is a unit of concentration used to measure the amount of a solute in a solution. It is defined as the number of moles of solute dissolved per liter of solution (mol/L). In other words, molarity tells us how many moles of solute are present in each liter of solution.

The formula for calculating molarity is:

Molarity (M) = moles of solute ÷ volume of solution in liters

Molarity = 100g/180 g/mol * 1/1.5 L

= 0.37 M,

Molality = 200g/58.5g/mol * 1/2 Kg

1.71 m

Learn more about molarity:https://brainly.com/question/8732513

#SPJ1

In general, there are three types of bonds: sigma bonds (single bonds), one sigma bond and one pi bond (double bonds), and one sigma bond and two pi bonds (triple bonds).

Sigma bonds are the simplest type of covalent bond, formed by the direct overlap of atomic orbitals between two component atoms. These bonds result in a strong, stable connection and are typically found in single bonds.

In double bonds, there is one sigma bond and one pi bond between the component atoms. The sigma bond is formed as mentioned earlier, while the pi bond results from the sideways overlap of p orbitals, creating a bond above and below the sigma bond plane.

This combination of bonds leads to a shorter and stronger connection between the atoms compared to a single bond.

Lastly, in triple bonds, there is one sigma bond and two pi bonds between the component atoms.

The sigma bond is formed in the same manner as single and double bonds, while the two pi bonds occur when two sets of p orbitals overlap perpendicularly to each other, with one set above and below, and the other set in front and behind the sigma bond plane.

This configuration leads to an even shorter and stronger bond compared to double bonds.

To identify the bond types between component atoms, you will need to examine the molecular structure and electron sharing between the atoms involved. Count the number of shared electron pairs to determine if it's a single (sigma), double (sigma and pi), or triple bond (sigma and two pi bonds).

To know more about bonds, visit:

https://brainly.com/question/17405470#

#SPJ11

The final volume of the gas can be determined using the ideal gas law, which states that pressure multiplied by volume is equal to the number of moles of a gas multiplied by the gas constant and the temperature (PV=nRT).

Since the pressure is constant, the final volume can be determined by simply calculating the ratio of the final temperature (300 K) over the initial temperature (200 K). Thus, the final volume of the gas would be 5L x (300/200) = 7.5L.

This is based on the assumption that the ideal gas law holds true, meaning that the gas particles are well separated, the forces between them are negligible, and the volume occupied by the gas particles is negligible.

This equation works well for most gases at relatively low pressures and temperatures, but it fails to accurately describe some gases in extreme conditions.

Know more about Ideal gas law here

https://brainly.com/question/28257995#

#SPJ11

Based on the scenario described, it is likely that the student spilled a solution containing a flammable compound such as ethanol or methanol. These compounds are commonly used in chemistry labs and can easily catch fire if not handled properly. The bright red color of the flames is likely due to the presence of a metal salt in the solution, which can produce colored flames when heated. It is important to always follow safety rules in a lab setting to prevent accidents like this from happening.

How does burn ethanol?

Ethanol can be burned in the presence of oxygen to produce carbon dioxide (CO2) and water (H2O) in a process known as combustion. The chemical formula for ethanol combustion is:

C2H5OH + 3O2 → 2CO2 + 3H2O

In this reaction, the ethanol (C2H5OH) reacts with oxygen (O2) to produce carbon dioxide (CO2) and water (H2O). The reaction releases heat, which can be used as a source of energy.

To burn ethanol, it is typically mixed with air or oxygen and then ignited. The combustion process can be controlled by adjusting the amount of ethanol and oxygen that is mixed together, as well as the temperature and pressure of the reaction.

In some cases, ethanol is burned in internal combustion engines, such as those used in cars and other vehicles. In these engines, the combustion of ethanol is used to power the engine and generate mechanical energy.

It's important to note that the combustion of ethanol releases carbon dioxide, a greenhouse gas that contributes to climate change. As such, efforts are being made to reduce the amount of greenhouse gas emissions from burning ethanol and other fuels, through the use of renewable energy sources and more efficient combustion processes.

To know more about Ethanol:

https://brainly.com/question/25002448

#SPJ11

Answer:

Explanation:

From the balanced chemical equation, we can see that one mole of CaCO3 reacts with one mole of CaSO4. Therefore, we can use the molar mass of CaCO3 and the given amount of CaSO4 to calculate the amount of CaCO3 needed, and then convert it to mass.

Number of moles of CaSO4 = Mass / Molar mass

Number of moles of CaSO4 = 136 / 136

Number of moles of CaSO4 = 1

Since the reaction is 1:1, the number of moles of CaCO3 required is also 1. Therefore, we can use the molar mass of CaCO3 to calculate the mass required:

Mass of CaCO3 = Number of moles x Molar mass

Mass of CaCO3 = 1 x 100

Mass of CaCO3 = 100 g

Therefore, the answer is (1) 100 g.

PLS MARK ME BRAINLIEST

Number of moles required to completely react with 107mL of 6.00 M H₂SO₄ is 0.428.

To determine the number of moles of aluminum (Al) needed to completely react with 107 mL of 6.00 M H₂SO₄, we first need to find the moles of H₂SO₄ in the given volume. Use the molarity formula:

moles = molarity × volume (in liters)

moles of H₂SO₄ = 6.00 M × (107 mL × 1 L / 1000 mL) = 0.642 moles H₂SO₄

Now, use the stoichiometry from the balanced chemical equation:

2 moles Al react with 3 moles H₂SO₄

To find moles of Al needed, set up a proportion:

(2 moles Al / 3 moles H₂SO₄) = (x moles Al / 0.642 moles H₂SO₄)

Solve for x:

x moles Al = (2 moles Al / 3 moles H₂SO₄) × 0.642 moles H₂SO₄ = 0.428 moles Al

So, 0.428 moles of aluminum are required to completely react with 107 mL of 6.00 M H₂SO₄.

Know more about Molarity here:

https://brainly.com/question/8732513

#SPJ11

The reaction that takes place when 2 teaspoons of supernatant liquid is added to the purple camote peel extract soaked with rubbing alcohol overnight is the formation of a purple pigment.

The purple pigment is created when the alcohol and steel wool vinegar react with the camote peel extract to break down the cell walls and release the pigment. This reaction is further enhanced by the addition of the supernatant liquid, which helps to dissolve the pigment and make it more easily visible.

The reaction that takes place when 2 teaspoons of supernatant liquid is added to the flower alcoholic extract of bougainvillea petal soaked with rubbing alcohol overnight is the formation of a pinkish-red pigment.

The pinkish-red pigment is created when the alcohol and steel wool vinegar react with the petal extract to break down the cell walls and release the pigment. This reaction is further enhanced by the addition of the supernatant liquid, which helps to dissolve the pigment and make it more easily visible.

Know more about Supernatant liquid  here

https://brainly.com/question/31171418#

#SPJ11

The mass of water present in the calorimeter was 110.6 g.

The heat released by the reaction of magnesium oxide with hydrochloric acid was absorbed by the water in the calorimeter, resulting in a change in the temperature of the water. Using the equation

Q = mcΔT

where Q is the heat released, m is the mass of water, c is the specific heat capacity of water, and ΔT is the change in temperature, we can calculate the mass of water present:

Q = mcΔT

4860J = m x 4.18 J/g°C x (46.0°C - 25.0°C)

m = 4860J ÷ (4.18 J/g°C x 21.0°C)

m = 110.6 g

To learn more about mass follow the link:

brainly.com/question/15959704

#SPJ4

The property that allows filter paper to carry out its function is known as porosity.

Porosity refers to the measure of empty space within a material, and in the case of filter paper, it allows liquids to pass through while trapping solid particles or impurities. This property is essential for filter paper to effectively perform its function in separating solids from liquids.

Filter paper is typically made from cellulose fibers that are tightly woven together to create a dense and permeable material. The porosity of the filter paper depends on the size and shape of the pores within the material.

The smaller the pore size, the finer the filtration that can be achieved, while larger pore sizes allow for faster flow rates but may not effectively trap smaller particles.

In summary, the porosity property of filter paper is what enables it to separate solid particles from liquids by allowing the liquid to pass through while trapping the particles.

To know more about porosity, visit:

https://brainly.com/question/29311544#

#SPJ11

Explanation:

To calculate the heat absorbed by the iron, we can use the formula:

Q = m * c * ΔT

where Q is the heat absorbed, m is the mass of the iron, c is the specific heat of iron, and ΔT is the change in temperature.

Given:

Mass of iron (m) = 14.1 g

Specific heat of iron (c) = 0.450 J/gºC

Change in temperature (ΔT) = 32.9ºC - 20ºC = 12.9ºC

Substituting these values into the formula, we get:

Q = 14.1 g * 0.450 J/gºC * 12.9ºC

Q = 81.47 J

Therefore, the iron absorbed 81.47 J of heat.

Dialcohol and diacid are bifunctional molecules that can be used in the synthesis of polyesters. In a polyester, the dialcohol and diacid react to form an ester bond, resulting in a long chain polymer.

Diesters can also be used in the synthesis of polyesters, as they can be hydrolyzed to form two carboxylic acid groups and two alcohol groups, which can then react to form an ester bond. Therefore, diesters are also a material used in the synthesis of polyesters.

Diamines and diacids can react to form nylon, so they are bifunctional molecules used in the synthesis of nylons. The reaction between a diamine and diacid forms an amide bond, which leads to a long-chain polymer.

Dinitro and diether are bifunctional molecules that are neither used in the synthesis of polyesters nor nylons. Dinitro compounds typically have nitro groups attached to each of the functional groups, making them more reactive and often used as explosives.

Diethers, on the other hand, can be used in organic synthesis as protecting groups for alcohols or carbonyl groups, but they do not have a direct role in the synthesis of polyesters or nylons.

To know more about Dialcohol refer to-

https://brainly.com/question/31540667

#SPJ11

We need 39.9 grams of sodium sulfate to prepare 750 mL of a 0.375 M solution.

Volume of the solution = 750 mL = 0.750 L
We know that, moles of solute = molarity × volume of solution (in L)

moles of sodium sulfate = 0.375 M × 0.750 L = 0.281 mol
Molar mass of sodium sulfate ([tex]Na_{2}SO_{4}[/tex])= (2 × 22.99 g/mol) + (4 × 16.00 g/mol) + (32.07 g/mol) = 142.04 g/mol
Therefore, grams of [tex]Na_{2}SO_{4}[/tex] = moles of [tex]Na_{2}SO_{4}[/tex] × molar mass of [tex]Na_{2}SO_{4}[/tex] = 0.281 mol × 142.04 g/mol = 39.9 g

We need 39.9 grams of sodium sulfate to prepare 750 mL of a 0.375 M solution.

To know more about molarity visit:

https://brainly.com/question/8732513

#SPJ11

We can start by balancing the chemical equation:

3 Ca + Au2(SO4)3 → 3 CaSO4 + 2 Au

The equation shows that 2 moles of gold atoms are produced for every 1 mole of Au2(SO4)3 that reacts. We can use Avogadro's number to convert the number of atoms of gold to moles:

4.6 x 10^22 atoms of gold / 6.022 x 10^23 atoms/mol = 0.0764 moles of gold

Therefore, we know that 0.0764 moles of Au2(SO4)3 reacted in the equation. To find the mass of Au2(SO4)3, we can use its molar mass:

Au2(SO4)3 molar mass = (2 x 196.97 g/mol) + (3 x 96.06 g/mol) + (12 x 16.00 g/mol) = 842.09 g/mol

Finally, we can use the following conversion factor to calculate the mass of Au2(SO4)3:

0.0764 moles of Au2(SO4)3 x 842.09 g/mol = 64.3 g of Au2(SO4)3

Therefore, approximately 64.3 grams of Au2(SO4)3 were reacted to produce 4.6 x 10^22 atoms of gold.

To know more about chemical refer here

https://brainly.com/question/29237397#

#SPJ11

Tagatose and Leloir pathways are two different metabolic pathways involved in the breakdown and utilization of dietary sugars, such as galactose.

The Tagatose pathway is a bacterial pathway that allows for the utilization of galactose, a monosaccharide similar to glucose, as an energy source.

In this pathway, galactose is converted into tagatose, another monosaccharide, by the enzyme galactose isomerase.

The tagatose is then broken down into dihydroxyacetone phosphate (DHAP) and glyceraldehyde-3-phosphate (G3P) through a series of reactions, which can enter the glycolysis pathway for further energy production.

The Leloir pathway, on the other hand, is a pathway found in animals and some microorganisms that also converts galactose into glucose-6-phosphate (G6P), a molecule that can enter the glycolysis pathway.

In the Leloir pathway, galactose is converted into galactose-1-phosphate by the enzyme galactokinase, and then into UDP-galactose by the enzyme galactose-1-phosphate uridylyltransferase. UDP-galactose is then converted into UDP-glucose by the enzyme UDP-galactose 4-epimerase.

Finally, UDP-glucose is converted into G6P by the enzyme phosphoglucomutase.

In summary, while both pathways involve the conversion of galactose into glucose derivatives, the Tagatose pathway involves the conversion of galactose into tagatose and then into DHAP and G3P, while the Leloir pathway involves the conversion of galactose into G6P through a series of intermediate steps.

To know more about breakdown refer here

https://brainly.com/question/13092374#

the molar solubility of lead phosphate in a 0.202 M sodium phosphate solution is approximately 1.27 × 10^-7 M.

To calculate the molar solubility of lead phosphate in a sodium phosphate solution, we need to use the solubility product constant (Ksp) of lead phosphate and the common ion effect of sodium phosphate.

The balanced equation for the dissolution of lead phosphate (Pb3(PO4)2) is:

Pb3(PO4)2(s) ⇌ 3Pb2+(aq) + 2PO42-(aq)

The Ksp expression for lead phosphate is:

Ksp = [Pb2+]^3[PO42-]^2

The balanced equation for the dissociation of sodium phosphate (Na3PO4) is:

Na3PO4(s) ⇌ 3Na+(aq) + PO42-(aq)

In a 0.202 M sodium phosphate solution, the concentration of the PO42- ion is [PO42-] = 3 × 0.202 M = 0.606 M, due to the dissociation of sodium phosphate.

To calculate the molar solubility of lead phosphate, we can assume that x mol/L of Pb3(PO4)2 dissolves and forms 3x mol/L of Pb2+ and 2x mol/L of PO42-. Using the Ksp expression and the common ion effect, we can write:

Ksp = [Pb2+]^3[PO42-]^2
Ksp = (3x)^3(2x)^2 = 108x^5

Since the concentration of PO42- is 0.606 M, the concentration of Pb2+ is also 3x = 3(0.202 M - x). Substituting this into the Ksp expression gives:

Ksp = (3x)^3(2x)^2 = 108x^5
4.8 × 10^-27 = (3(0.202 - x))^3(2x)^2

Solving for x, we get:

x = 1.27 × 10^-7 M

Therefore, the molar solubility of lead phosphate in a 0.202 M sodium phosphate solution is approximately 1.27 × 10^-7 M.
Visit to know more about molar solubility:-

https://brainly.com/question/28202068

#SPJ11

The candy provides 4.04 nutritional calories per gram.

The researcher used a bomb calorimeter to determine the nutritional value of the candy. The nutritional value refers to the amount of energy that a food provides to the body when it is consumed. This energy is typically measured in calories, which are a unit of energy.

To determine the nutritional value of the candy, the researcher placed a 3.60 g sample of the candy in the bomb calorimeter and combusted it in excess oxygen. The observed temperature increase was 2.07 ∘C, and the heat capacity of the calorimeter was 29.40 kj⋅k−1.

Using these values, the researcher can calculate the number of nutritional calories per gram of the candy.

To do this, the researcher needs to use the following equation:

q = C × ΔT

where q is the heat released by the combustion of the candy, C is the heat capacity of the calorimeter, and ΔT is the observed temperature increase. By rearranging this equation, the researcher can solve for the heat released by the combustion:

q = C × ΔT
q = (29.40 kj⋅k−1) × (2.07 ∘C)
q = 60.93 kJ

To convert this value to nutritional calories per gram of the candy, the researcher needs to divide by the mass of the candy:

60.93 kJ / 3.60 g = 16.92 kJ/g

Finally, the researcher can convert this value to nutritional calories by dividing by 4.184 (the conversion factor between kJ and nutritional calories):

16.92 kJ/g / 4.184 = 4.04 nutritional calories per gram of the candy.

Therefore, the candy provides 4.04 nutritional calories per gram.

To know more about nutritional calories, visit:

https://brainly.com/question/2713545#

#SPJ11

Globular clusters are usually found in the halo of a galaxy. The answer is d.

Globular clusters are dense, spherical collections of stars that orbit a galactic center. They are typically composed of tens of thousands to hundreds of thousands of stars and are some of the oldest known objects in the universe.

Globular clusters are usually found in the halo of a galaxy, which is the outermost region of a galaxy that surrounds the disk.

This is because they are thought to have formed early in the history of the galaxy, when the halo was still being formed.

In contrast, stars in the disk of a galaxy are typically younger and more spread out, with less dense collections of stars. The nucleus of a galaxy is the central region, which usually contains a supermassive black hole and dense concentrations of stars.

Therefore, the correct answer is d. halo.

To know more about Globular clusters, refer here:

https://brainly.com/question/29944733#

#SPJ11