v = 20/5
= 4m/s
Velocity equals distance over time.
if 20.0 ml of a 0.0800 m hno3, 35.0 ml of a 0.0500 m kscn, and 80.0 ml of a 0.0700 m fe(no3)3 are combined, what is the initial concentration of fe3 in the mixture? do not use scientific notation in your answer.
Answer: The initial concentration of Fe3 in the mixture is 8.95 mL.
The initial concentration of Fe3 in the mixture can be calculated using the equation: c1V1 + c2V2 + c3V3 = c, where c is the total molarity, V1, V2, and V3 are the volumes of the respective solutions, and c1, c2, and c3 are the initial molarities.
In this case, we have 20.0 ml of a 0.0800 M HNO3, 35.0 ml of a 0.0500 M KSCN, and 80.0 ml of a 0.0700 M Fe(NO3)3.
We can then calculate the initial concentration of Fe3 in the mixture as follows:
c = (0.0800 M * 20.0 mL) + (0.0500 M * 35.0 mL) + (0.0700 M * 80.0 mL)
c = (1.6 mL) + (1.75 mL) + (5.6 mL)
c = 8.95 mL
Therefore, the initial concentration of Fe3 in the mixture is 8.95 mL.
Learn more about initial concentration here:
https://brainly.com/question/14498400#
#SPJ11
The sun has a mass that is 333000 greater than earths. Even though the mass of the sun is so great, the moon stays in orbit around the Earth, which of the following best explains why the moon stays in orbit around the Earth.
The moon stays in orbit around the Earth because of the gravitational force between them.
What is the impact of gravitational force on moon?Despite the Sun having a much larger mass than the Earth and the Moon, the gravitational force between the Earth and the Moon is stronger due to their proximity. The gravitational force of the Earth on the Moon is what keeps it in orbit around the Earth.
This is because gravity is proportional to the product of the masses of the two objects and inversely proportional to the square of the distance between them. Although the Sun has a much larger mass than the Earth, it is also much farther away from the Moon, so the gravitational force it exerts on the Moon is much weaker than the gravitational force of the Earth on the Moon.
Therefore, it is the combination of the Moon's velocity and the gravitational force of the Earth that keeps it in orbit around the Earth, despite the much greater mass of the Sun.
Learn more about gravitational force here: https://brainly.com/question/27943482
#SPJ1
water molecules are attracted to each other and to ions due to . group of answer choices the viscosity of water. electron transfer. electron sharing. surface tension. the polarity of water molecules.
Water molecules are attracted to each other and to ions due to the polarity of water molecules.
The separation of electric charge leading to a molecule having two poles, one positive and the other negative, is referred to as polarity. A polar molecule has a permanent dipole, whereas a nonpolar molecule does not. Water is an example of a polar molecule. The polarity of water is the reason why it is a good solvent and why it is attracted to other polar molecules and ions.
In water, the polar water molecules are pulled toward each other, forming hydrogen bonds. These hydrogen bonds give water its unique properties, such as high surface tension, capillary action, and high boiling and melting points. Ions are also attracted to water due to the polar nature of water molecules. Water molecules surround ions in a process known as hydration or solvation, which stabilizes the ions in solution.
As a result of the polarity of water, it is able to dissolve a wide range of ionic and polar substances, making it one of the most significant substances on the planet.
For more such questions on polarity, click on:
https://brainly.com/question/17118815
#SPJ11
0.40 g of sodium hydroxide ( naoh ) pellets are dissolved in water to make 2.0 l of solution. what is the ph of this solution?
The pH of the sodium hydroxide (NaOH) solution is 11.7.
Sodium hydroxide is a strong base and has a very high pH.
To calculate the pH of the solution, you must first calculate the molarity of the solution. To do this, divide the mass of sodium hydroxide by its molar mass, then divide that number by the volume of the solution.
Molarity = (0.40 g NaOH) / (40 g/mol) / (2.0 L) = 0.005 M = 5 x 10⁻³M.
The pH of a strong base is equal to its pOH plus 14. Since pOH is equal to -log[OH-], we can use the molarity of the solution to calculate the pH.
pOH = -log(5 x 10⁻³ M) = 2.30= 11.7
Therefore, the pH of the solution is equal to 14 - 2.30 = 11.7.
Therefore, 0.40 g of sodium hydroxide (NaOH) pellets dissolved in water will create a solution with a pH of 11.7.
To know more about pH, refer here:
https://brainly.com/question/491373#
#SPJ11
a sample of 500 oxygen atoms contains a mixture of 20o (20.0040754 amu) and 23o (23.01570 amu). the weighted average of oxygen atoms 22.76272353 amu. how many 20o atoms are present in this sample?
The number of 20o atoms present in the given sample of 500 oxygen atoms is 301.
The weighted average is a measure of central tendency that takes into account the varying weights (or importance) of the different values in a data set. A weighted average is calculated by multiplying each value by its weight and dividing it by the sum of the weights. It is also referred to as a weighted mean or weighted arithmetic mean. The formula for the weighted average is,
weighted average = (w1x1 + w2x2 + w3x3 + … wn xn) / (w1 + w2 + w3 + … wn)
Where,x1, x2, x3, … xn are the values of the individual observations w1, w2, w3, … wn are the respective weights of the individual observations to solve the given problem. A sample of 500 oxygen atoms contains a mixture of 20o (20.0040754 amu) and 23o (23.01570 amu). The weighted average of oxygen atoms is 22.76272353 amu. We have to find how many 20o atoms are present in this sample.
Here,20o atoms have a mass of 20.0040754 amu23o atoms have a mass of 23.01570 amu
The average mass of 500 oxygen atoms is 22.76272353 amu. Therefore,
500 oxygen atoms weigh= 500 x 22.76272353 = 11381.36176 amu.
average atomic mass of oxygen = 20o atoms (20.0040754 amu) and 23o atoms (23.01570 amu)
Atomic mass of oxygen = [(number of 20o atoms x mass of 20o atoms) + (number of 23o atoms x mass of 23o atoms)] / Total number of oxygen atoms
Let's consider a number of 20o atoms to be ‘x’.Therefore, the number of 23o atoms = (500 - x). Substituting the given values in the above formula, we get,
22.76272353 = [(x x 20.0040754) + ((500 - x) x 23.01570)] / 50022.76272353 = (20.0040754x + 11507.825 - 23.01570x) / 50022.76272353 x 500 = 11507.825 - 3.0116246xx = 301.05 ≈ 301Number of 20o atoms = 301.
Hence, 301 number of 20o atoms are present in this sample.
You can learn more about oxygen atoms at: brainly.com/question/29695801
#SPJ11
which of the following are compounds? question 37 options: a) h2o and o2 b) h2o, o2, and ch4 c) h2o and ch4, but not o2 d) o2 and ch4
Compounds are substances that are made up of two or more elements chemically bonded together.Option A: H2O and O2 are both compounds. H2O is water and O2 is oxygen, both of which are made up of two elements.
Option B: H2O, O2, and CH4 are all compounds. H2O is water, O2 is oxygen, and CH4 is methane, all of which are made up of two or more elements.
Option C: H2O and CH4 are both compounds, but O2 is not. H2O is water and CH4 is methane, both of which are made up of two or more elements. O2 is oxygen, which is not a compound since it is made up of a single element.
Option D: O2 and CH4 are both compounds. O2 is oxygen and CH4 is methane, both of which are made up of two or more elements.
To know more about compounds click on below link :
https://brainly.com/question/14117795
#SPJ11
hich of the following statements correctly describes a racemic mixture? multiple choice question. a mixture containing equal amounts of two diastereomers
Ion channels are classified as membrane transport proteins. Channels discriminate by size and charge. In addition to Na+, which one of the following ions would you expect to be able to freely diffuse through a Na+ channel?
a) Mg2+
b) H+
c) K+
d) Cl-
Ion channels are classified as membrane transport proteins. Channels discriminate by size and charge.
What are transport membrane proteins?
Transport membrane proteins are proteins that aid in the movement of molecules across the membrane. These transport membrane proteins come in various forms and serve various functions, including regulating molecules' passage. As a result, they play a vital role in cell homeostasis.
What are ion channels?
Ion channels are pore-forming proteins found in the membranes of all cells, which facilitate the diffusion of ions down their electrochemical gradient across the plasma membrane.
What is diffusion?
Diffusion is the random movement of particles from an area of higher concentration to an area of lower concentration. It is the primary mechanism of particle transport in cells.
How does ion diffusion work?
Ion diffusion is a type of passive transport that occurs spontaneously down an electrochemical gradient, from an area of high concentration to an area of low concentration, through a semipermeable membrane. It is facilitated by ion channels, which are membrane transport proteins that allow ions to move across the plasma membrane down their electrochemical gradient.
The charge and size of the ion channels determine the molecules that can pass through the membrane via these channels. Small ions like Na+ and K+ can pass through the ion channels easily, while larger ions cannot.
Na+ channels also permit the passage of K+ ions but not Mg2+ or Cl-.
Therefore, in addition to Na+, K+ is expected to freely diffuse through Na+ channels.
Answer: c) K+.
To know more about the ion channel https://brainly.com/question/29415412
#SPJ11
where does the material in cement come from? choose one: a. it is deposited with sediment grains. b. it forms as sediment grains recrystallize. c. it forms as sediment grains chemically weather. d. it forms as ions precipitate out of the water in the pore spaces between grains.
The materials comes as It is deposited with sediment grains. (a)
The material used to make cement is composed of minerals found in sedimentary rocks. These sedimentary rocks are formed when sediment grains are deposited in layers and then hardened over time.
These sedimentary rocks can include sand, clay, and minerals such as calcite and gypsum. The sediment grains are the source of the material used to make cement.
The mixture is heated until it forms a paste-like material called clinker. The clinker is then ground into a fine powder, which is the cement we use for construction and other purposes.
So, cement is made from a mixture of these sediment grains, combined with water and other substances such as limestone, iron ore, and aluminum oxide. (a)
To know more about sedimentary rocks click on below link:
https://brainly.com/question/10709497#
#SPJ11
How many moles are in 3.5 moles of FeF3
We just use molar mass for FeF3 (129.9 g/mol) to calculate the number moles in 3.5grammes of FeF3. Hence, just 3.5 x 129.9 = 4546.5 moles of FeF3 need to be multiplied.
Describe the Mass.An object's mass is determined by how much matter it has. Something that has more substance will weigh heavier overall. For instance, because an elephant contains more stuff than a mouse does, it has a heavier mass.
55.8+3⋅19=116 g/mole24 g116 g/mol=0.207 moles of FeF3
0.207 moles×6.022×23molecules/mole=1.2×1023molecules
How is mass measured?A thing's mass is how much matter it contains. Using a balance, scientists frequently determine mass. A beam balance or perhaps an electronic balance can be used to measure the mass of solids directly. Measure a liquid's volume, then use the density table to determine the liquid's mass.
To know more about mass visit:
https://brainly.com/question/15959704
#SPJ1
Given the reaction, how many moles of Z will be produced from 3.60 mol A, assuming excess B?
2A+3B⟶4Y+5Z
Moles of Z =
Thus, assuming there is reaction extra B, 3.60 mol of A will result in 9.00 moles of Z.
3.0 moles of zinc are converted into how many moles of hydrogen?According to the chemical equation, hydrogen gas is created when 1.0 mole of zinc combines with 1.0 mole of HCl. As a result, 3.0 moles of Zn react with 3.0 moles of hydrogen gas to form 3.0 moles of hydrogen gas.
The balanced chemical equation states that 2 moles of A and 3 moles of B combine to create 5 moles of Z.
The mole ratio of A to Z is therefore 2:5.
As a result, 3.60 moles of A will result in the following if 2 moles of A result in 5 moles of Z:
5 moles Z/2 moles A * 3.60 moles A = 9.00 moles of Z
To know more about reaction visit:-
https://brainly.com/question/28984750
#SPJ1
What is the mass of 0.928 moles of Ti(SO3)2
1) You know the number of moles, you can easily work out the molar mass of Ti(SO3)2 (titanium sulfite), but you don't know the actual mass
2) By adding the mass of the atoms that make up titanium sulfite, you should get something like 207.9934 g/mol
3) To find the actual mass, you times the molar mass and the moles together
Final Answer = 193g
calculate the molarity of the two solutions. the first solution contains 0.500 mol of naoh in 2.30 l of solution.
The molarity of the first solution containing 0.500 mol of NaOH in 2.30 l of the solution is 0.217 M.
The molarity of a solution is defined as the number of moles of solute per liter of solution. In order to calculate the molarity of the given solution, we need to divide the number of moles of solute by the volume of the solution given in liters. Using the formula for molarity, we have;
Molarity = Number of moles of solute / Volume of solution in liters
Given, Number of moles of solute = 0.500 mol
Volume of solution = 2.30 L
Substitute the values of the given information into the molarity formula; Molarity = 0.500 mol / 2.30 L = 0.217 M
You can learn more about molarity at: brainly.com/question/16727614
#SPJ11
which of these is not a subfamily of the hydrocarbon family? group of answer choices alkenes alkynes alkanes functionalized hydrocarbons aromatic hydrocarbons
Functionalized hydrocarbons is not a subfamily of the hydrocarbon family. Therefore, the correct option is option C.
A hydrocarbon is an organic molecule in organic chemistry that is made completely of hydrogen and carbon. Examples of group 14 hydrides include hydrocarbons. The majority of hydrocarbons are colourless and hydrophobic; they occasionally have a mild odour that is comparable to that of petrol or lighter fluid. They can be gases (like methane and propane), liquids (like hexane and benzene), low melting solids (like paraffin wax and naphthalene), or polymers (like polyethylene and polystyrene). They also occur in a wide variety of chemical configurations and phases. Functionalized hydrocarbons is not a subfamily of the hydrocarbon family.
Therefore, the correct option is option C.
To know more about hydrocarbon, here:
https://brainly.com/question/32019496
#SPJ12
calculate the volume in ml of 100% ethanol required to make 900 ml of 60% (v/v) solution ethanol in water.
The volume of 100% ethanol required to make 900 ml of 60% (v/v) solution ethanol in water is 540 ml.
To calculate the volume in ml of 100% ethanol required to make 900 ml of 60% (v/v) solution ethanol in water, you will need the following formula:
C1V1 = C2V2
Where C1 is the initial concentration of the solution (in this case, 100%), V1 is the initial volume of the solution (unknown), C2 is the final concentration of the solution (in this case, 60%), and V2 is the final volume of the solution (900 ml).
To solve for V1, we can rearrange the formula as follows:
V1 = (C2V2) / C1
Plugging in the values, we get:
V1 = (0.60 * 900) / 1.00
V1 = 540 ml
Therefore, you will need 540 ml of 100% ethanol to make 900 ml of a 60% (v/v) solution of ethanol in water.
To know more about ethanol, refer here:
https://brainly.com/question/30263729#
#SPJ11
How many moles is 54.0g of oxygen gas(O2)?
Answer:
Approximately 3.375 moles.
Explanation:
1 mole of oxygen is about 15.9 grams. And if you divide 54 by 15.9, you get 3.375.
do the particles at the surface of a liquid behave differently from those in the bulk of the liquid? explain.
Answer: Yes, the particles at the surface of a liquid behave differently from those in the bulk of the liquid. It is because of the different intermolecular forces that act on the surface particles in comparison to the bulk particles.
Surface tension is the force that holds the surface molecules of a liquid together. When a force is applied to the surface, the particles pull together and create a thin, strong layer. The surface molecules experience intermolecular forces from the molecules above and below them, but the ones below the surface experience more force from the molecules around them.
Because the surface molecules are more strongly attracted to each other than the molecules underneath, they behave differently. They are attracted to each other and form a strong bond that resists any force that might try to pull them apart. In contrast, the molecules in the bulk of the liquid experience less force from their neighbors and are more free to move around. This difference in behavior can be observed in several ways.
For example, the surface of a liquid tends to be flatter than the bulk of the liquid. This is because the surface molecules are more tightly bound and resist any tendency to form curves or bulges.
In addition, the surface molecules can evaporate more easily than the bulk molecules, leading to phenomena such as capillary action and evaporative cooling.
Learn more about intermolecular forces here:
https://brainly.com/question/9007693#
#SPJ11
if a glass marble weighs 3150 mg, what is the mass in centigrams? group of answer choices 31,050 cg 31.5 cg 3.15 cg none of these 315 cg
The mass of a glass marble, which is 3150 mg, is 0.315 centigrams. Therefore, the correct option is 3.15 cg.
A type of rock that is created from metamorphic rock composed mainly of carbonate minerals, particularly calcite or dolomite, is known as marble.
Marble is often used as a building material, and it has been used in sculptures for thousands of years. Marble has also been used for flooring, wall coverings, and countertops, among other things.
Marble is resistant to moisture, which makes it ideal for use in bathrooms and kitchens. It's also a great heat-resistant material, which is why it's used in fireplace surrounds and other applications where heat is present.
The marble surface is created by polishing or honing a marble slab. Honing roughs the surface of the stone, while polishing shines it to a high gloss.
Because of its visual appeal, durability, and ease of maintenance, marble is often used in high-end homes and commercial buildings.
It has a smooth texture that feels cool to the touch, making it ideal for hot climates because it keeps surfaces cool.
The substance is well-known for its attractive appearance, and it is frequently used in bathrooms and spas for its aesthetic
A metric unit of mass equal to one-hundredth of a gram (or 10−5 kilogram) is known as a centigram (cg). When determining the weight of objects or ingredients, the centigram is frequently used.
This unit is equal to 0.01 grams in the metric system. The abbreviation "cg" stands for centigrams. To convert a weight from milligrams to centigrams, simply move the decimal point two places to the left.
The formula for converting milligrams to centigrams is as follows: 1 milligram = 0.01 centigrams. As a result, the mass of a glass marble that weighs 3150 mg is equal to 0.315 centigrams.
to know more about marble refer here:
https://brainly.com/question/29287929#
#SPJ11
2. select the system with the greatest amount of entropy. a. pure water b. 0.500 m nacl c. 0.500 m mgcl2 d. 0.500 m alcl3
Answer: the answer is 15.009
Explanation:
calculate the volume (in ml) of 2.230 m sucrose containing 0.7718 moles sucrose. include units in your answer.
The volume of 2.230 m sucrose containing 0.7718 moles sucrose is 2.922 ml.
The volume of 2.230 m sucrose containing 0.7718 moles sucrose can be calculated using the following equation:
Volume (ml) = (Molarity (m) x Volume (L)) / Moles (mol)
Therefore, Volume (ml) = (2.230 m x 1L) / 0.7718 mol
Volume (ml) = 2.922 ml
The volume of 2.230 m sucrose containing 0.7718 moles sucrose, the molarity of sucrose needs to be known. Molarity is the amount of a solute that is present in one liter of a solution.
Molarity is typically expressed in terms of moles per liter (m). To calculate the volume, the equation (Molarity x Volume) / Moles is used. In this equation, Molarity is 2.230 m, Volume is 1L, and Moles is 0.7718 mol.
When these values are plugged into the equation, the resulting volume is 2.922 ml.
The volume of 2.230 m sucrose containing 0.7718 moles sucrose is 2.922 ml.
to know more about sucrose refer here:
https://brainly.com/question/29186350#
#SPJ11
Zn(s)+CuSO4(aq)→Cu(s)+ZnSO4(aq)When a zinc plate is placed in an aqueous solution of copper sulfate, elemental copper forms, as represented by the equation above. Which of the following represents the reduction half-reaction of the reaction?O Cu2+(aq)+2e−→Cu(s)O Ag+(aq)+Cl−(aq)→AgCl(s)O Fe2+(aq)→Fe3+(aq)+e−O HF(aq)+OH−(aq)→H2O(l)+F−(aq)
The correct reduction half-reaction for the given chemical equation (Zn(s) + CuSO₄(aq) → Cu(s) + ZnSO₄(aq)) is:
Cu²⁺(aq) + 2e⁻ → Cu(s)
1. First, let's identify the species that are changing their oxidation states in the reaction. It's zinc (Zn) and copper (Cu).
2. Zn is undergoing oxidation, as it is losing electrons and forming Zn²⁺ in ZnSO₄. Cu²⁺ from CuSO₄ is gaining electrons and forming elemental copper (Cu).
3. Now, we'll focus on the copper half-reaction to find the reduction half-reaction. Reduction is the process of gaining electrons, so we need to identify the half-reaction where Cu²⁺ gains electrons.
4. The given reduction half-reaction is Cu²⁺(aq) + 2e⁻ → Cu(s), which represents the process where Cu²⁺ ions from the copper sulfate solution gain two electrons to form solid copper.
5. To confirm this, we can check the other options provided:
a. Ag⁺(aq) + Cl⁻(aq) → AgCl(s) - This is a precipitation reaction
b. Fe²⁺(aq) → Fe³⁺(aq) + e⁻ - This is an oxidation half-reaction involving iron
c. HF(aq) + OH⁻(aq) → H₂O(l) + F⁻(aq) - This is an acid-base neutralization reaction
So, the correct reduction half-reaction for the given chemical equation is Cu²⁺(aq) + 2e⁻ → Cu(s).
to know more about half-reaction refer here:
https://brainly.com/question/13109589#
#SPJ11
i. if you conducted this coupling step under acidic conditions, how would you expect the reaction rate to be affected?
If you conducted this coupling step under acidic conditions, you expect the reaction rate to be affected because at low pH values, the carboxylic acid is transformed into a more electrophilic species, which is easily attacked by the nucleophile, and the yield of the amide bond would be high.
In organic synthesis, coupling reactions are common, and they include the combination of a nucleophile with an electrophile to form a covalent bond. The coupling reaction between a carboxylic acid and an amine is a straightforward way to synthesize an amide in the presence of an activating agent (a molecule that can increase the electrophilicity of the carboxylic acid).
It is worth noting that there are various methods for synthesizing amides, including chemical and enzymatic methods. Coupling reactions are the most frequent chemical methods used for the synthesis of amides.
Learn more about nucleophile at:
https://brainly.com/question/6357352
#SPJ11
elect any and all of these compounds that can undergo an addition and elimination reaction mechanism. OH OCH, A B C D E
Compounds that can undergo an addition and elimination reaction mechanism are OH and OCH3 since they are the ones that have a nucleophilic site or a leaving group.
The compounds that can undergo an addition and elimination reaction mechanism are listed below: OH - It is a hydroxyl group and is a nucleophile, which means it has an electron pair available for donation. OCH3 - Methoxy group, also known as OCH3, is a leaving group.
Addition reactions occur when two or more reactants combine to form a single product. They typically involve unsaturated compounds like alkenes or alkynes, which have double or triple carbon-carbon bonds. Elimination reactions, on the other hand, involve the removal of elements from a reactant to create a more unsaturated product, typically forming a double bond.
OH: This group represents an alcohol functional group. Alcohols can undergo elimination reactions, such as dehydration, to form alkenes.
OCH: This seems to be an incomplete functional group, as it is missing a carbon or hydrogen. If it's meant to represent an ether functional group (OCH3 or OCH2R, where R is an alkyl group), ethers generally do not undergo addition or elimination reactions.
In conclusion, without further information about compounds A, B, C, D, and E, we can only determine that a compound containing an OH functional group (an alcohol) can undergo elimination reactions, while the given OCH functional group does not undergo addition or elimination reactions.
To know more about nucleophilic site, refer here:
https://brainly.com/question/24297177#
#SPJ11
What is the nature of the bond indicated?
A. Nonpolar Covalent
B. Polar Covalent
C. Ionic
D. Metallic
The nature of the bond indicated in the diagram above would be the nonpolar covalent bond. That is option A.
What is a Nonpolar Covalent bond?A Nonpolar Covalent bond is defined as the type of chemical bond that is formed when electrons are shared equally between two atoms.
While polar covalent bond is defined as the type of chemical bond that is formed when electrons are shared unequally between two atoms.
For example, molecular oxygen (O2) is nonpolar because the electrons will be equally distributed between the two oxygen atoms.
Therefore the type of bond that is indicated in the diagram above is a nonpolar covalent bond.
Learn more about covalent bond here:
https://brainly.com/question/29630777
#SPJ1
In a mixture of oxygen and nitrogen gas, 90% of the total gas pressure is exerted by the nitrogen. If the total pressure is 5.0 atm, what pressure does the oxygen exert? (Number only, 1 decimal place)
The pressure exerted by oxygen gas, O₂, given that 90% of the total gas pressure is exerted by the nitrogen, is 0.5 atm
How do i determine the pressure exerted by oxygen gas?The following data were obtained from the question:
Percentage of nitrogen gas, N₂ = 90%Percentage of oxygen gas, O₂ = 100 - 90 = 10%Total pressure = 5.0 atmPressure exerted by oxygen gas, O₂ =?The pressure exerted by oxygen gas can be obtained as illustrated below:
Pressure exerted by oxygen gas = (percentage of oxygen gas / total percent) × total pressure
Pressure exerted by oxygen gas = (10 / 100) × 5
Pressure exerted by oxygen gas = 0.5 atm
Thus, we can conclude that the pressure exerted by oxygen gas is 0.5 atm
Learn more about partial pressure:
https://brainly.com/question/15577259
#SPJ1
For each bond, select the arrow that indicates the direction of bond polarity. [chemistry formula]
For each bond, there are two arrows that indicate the direction of bond polarity. The arrow represents the more electronegative atom, and it points to the partially negative end of the bond. The arrow points to the more electronegative element, and the partially positive end of the bond.
For example, in the hydrogen chloride (HCl) molecule, the more electronegative atom is chlorine, with an electronegativity of 3.16. Hydrogen, on the other hand, has an electronegativity of 2.2. As a result, the bond is polarized, and the electron density is shifted towards the chlorine atom. Therefore, the polarity direction of the H-Cl bond will be: H → Cl.
Bond polarity is essential to chemistry because it influences the way atoms interact with one another, the formation of chemical compounds, and the resulting properties. To determine the direction of bond polarity in a chemical formula, follow these steps:
Identify the two atoms involved in the bond. Determine the electronegativity values of both atoms. You can find these values in an electronegativity table or chart. Compare the electronegativity values. The atom with the higher electronegativity will have a stronger pull on the shared electrons, making it the more electronegative end of the bond.
Draw an arrow from the less electronegative atom (partial positive charge) to the more electronegative atom (partial negative charge). This arrow indicates the direction of bond polarity. This implies that the arrow that represents the bond polarity direction is from the less electronegative atom to the more electronegative atom.
Remember, the arrow always points towards the more electronegative atom in the bond.
Complete question: For Each Bond, Select The Arrow That Indicates The Direction Of Bond Polarity. F-CH3 H3C-NH2 Br—MgCH3
To know more about bond polarity, refer here:
https://brainly.com/question/15099999#
#SPJ11
the partial pressure of f2 in a mixture of gases where the total pressure is 1.00 atm is 300. torr. what is the mole fraction?
The partial pressure of F2 in a mixture of gases where the total pressure is 1.00 atm is 300 torr. The mole fraction is 0.149.
We need to calculate the mole fraction. The mole fraction is defined as the ratio of the number of moles of a component in a mixture to the total number of moles of all components in the mixture.The partial pressure of F2 is given to be 300 torr.
The total pressure is given to be 1.00 atm.
Partial pressure is the pressure exerted by one of the components of the mixture. It is defined as the product of the mole fraction and the total pressure.
The formula for mole fraction is:
nF2 / ntotal = partial pressure of F2 / total pressure
The mole fraction of F2 is given by:
nF2 / ntotal = (300 torr) / (1.00 atm) = 0.316
This is the mole fraction of F2. We need to find the mole fraction of the mixture.
The mole fraction of the mixture is given by:
nF2 + nO2 / ntotal
= partial pressure of F2 + partial pressure of O2 / total pressurenO2 / ntotal
= (1.00 atm - 300 torr) / (1.00 atm)
= 0.70nF2 / ntotal + 0.70 = 1.00nF2 / ntotal
= 0.30
The mole fraction of F2 is:nF2 / ntotal = 0.30
The mole fraction of the mixture is:
nF2 + nO2 / ntotal = nF2 / ntotal + nO2 / ntotal = 0.30 + 0.70 = 1.00
Therefore, the mole fraction of the mixture is 1.00. The mole fraction of F2 is 0.30. The mole fraction of O2 is 0.70.
What l formation does the first digit of VSEPR number provide?
The VSEPR (Valence Shell Electron Pair Repulsion) theory is used to predict the shapes of molecules based on the arrangement of electron pairs around the central atom.
The VSEPR theory assigns a numerical value, called the "VSEPR number", to each central atom in a molecule.
The first digit of the VSEPR number corresponds to the number of electron pairs around the central atom that are involved in bonding. Specifically:
A VSEPR number of 2 indicates that the central atom has 2 electron pairs involved in bonding (e.g. linear geometry).A VSEPR number of 3 indicates that the central atom has 3 electron pairs involved in bonding (e.g. trigonal planar or pyramidal geometry).A VSEPR number of 4 indicates that the central atom has 4 electron pairs involved in bonding (e.g. tetrahedral or square planar geometry).A VSEPR number of 5 indicates that the central atom has 5 electron pairs involved in bonding (e.g. trigonal bipyramidal geometry).A VSEPR number of 6 indicates that the central atom has 6 electron pairs involved in bonding (e.g. octahedral or square pyramidal geometry).The first digit of the VSEPR number is used to determine the general electron pair geometry around the central atom, which is a crucial factor in determining the molecular geometry of the molecule.
Learn more about VSEPR,
https://brainly.com/question/29756299
#SPJ4
A mixture of oxygen carbon dioxide and nitrogen has a total pressure of 0. 97-atm what is the partial pressure of 02 if the pco2 is 0. 70-atm and the pn2 is 0. 12-atm
The partial pressure of O2 is 0.15 atm if the pco2 is 0. 70-atm and the pn2 is 0
we have a mixture of three gases: oxygen (O2), carbon dioxide (CO2), and nitrogen (N2).
We are given the total pressure of the mixture, which is 0.97 atm, as well as the partial pressures of CO2 and N2, which are 0.70 atm and 0.12 atm, respectively.
To find the partial pressure of O2, we need to subtract the partial pressures of CO2 and N2 from the total pressure.
Partial pressure of O2 = Total pressure - Partial pressure of CO2 - Partial pressure of N2
Partial pressure of O2 = 0.97 atm - 0.70 atm - 0.12 atm
Partial pressure of O2 = 0.15 atm
Therefore, the partial pressure of O2 is 0.15 atm.
To know more about pressure click here:
brainly.com/question/12971272
#SPJ4
during chemical weathering, sodium is released as dissolved ions and transported to the ocean, where:
Answer: During chemical weathering, sodium is released as dissolved ions and transported to the ocean, where it increases the salinity of the seawater.
Salinity is a measure of the amount of salt in seawater. The greater the salinity, the more salt there is in the water. The salinity of seawater is expressed in parts per thousand (ppt). There are about 35 ppt of salt in seawater.
Chemical weathering is the breakdown of rocks by chemical reactions, resulting in the formation of new minerals. Water is the most common medium for chemical weathering because it can dissolve many minerals. Carbon dioxide, oxygen, and organic acids are also involved in chemical weathering.
Sodium is a common element in minerals that are subject to chemical weathering. When rocks weather, sodium ions are released into the water. Rivers and streams transport these dissolved ions to the ocean, where they accumulate over time.
This is why seawater has a high concentration of sodium ions. Sodium is also introduced into seawater through underwater volcanoes and hydrothermal vents.
Sodium is important for many organisms that live in the ocean. It is an essential nutrient for marine animals, and it plays a role in regulating the body fluids of fish and other aquatic animals. Sodium is also important for maintaining the pH of seawater.
The concentration of sodium in seawater can also have an impact on ocean currents and the movement of water around the world.
Learn more about sodium here:
https://brainly.com/question/29327783#
#SPJ11