if n > 30 , then the sampling distribution of the mean will have a shape of symmetric , the mean will be equal to [ select ] and the standard error will be equal to

Answer:

11°

Step-by-step explanation:

The sum of the angles in a triangle is always 180°. Therefore, we can find the measure of ∠z by subtracting the measures of ∠x and ∠y from 180°:

∠z = 180° - ∠x - ∠y

∠z = 180° - 110° - 59°

∠z = 11°

Therefore, the measure of ∠z is 11°

The equation has a solution of -1

Algebraic expressions are defined as those expressions that are made up of variables, constants, factors, coefficients and terms.

They are also composed of mathematical operations, such as;

Also, note that linear equation are equations having the greatest degree of  x as 1.

An equation having a solution would have the x value.

From the equation given, we have that;

2x+2=x+1

collect the like terms

2x - x =1 - 2

subtract the values

x = - 1

Learn about linear equations at: https://brainly.com/question/2030026

#SPJ1

In conclusion, we can say that the IQR is a better measure of variation for these data because it is less affected by outliers and gives a more accurate picture of the spread of the data.

The given box plot illustrates the population of several states (in millions).

The range and the interquartile range (IQR) are both the measures of variation that explain the variation within a set of data, but there are some variations between these two measures.

Let's discuss the differences between these two measures.
Range:
The range is defined as the difference between the highest and lowest values of a data set.

The range is useful for describing the overall spread of the data, which is particularly useful when dealing with very small datasets.

This measure is sensitive to the extreme values, such as outliers.

Because of this, the range of the population of several states can be used to identify the minimum and maximum value for the population of several states.
IQR:
The interquartile range (IQR) is the difference between the 75th and 25th percentiles, also known as the first and third quartiles, in a data set.

The IQR is a better measure of variation than the range because it is less sensitive to extreme values or outliers.

As a result, the IQR is a more robust measure of the spread of the data.

Therefore, it is better to use the IQR for the population of several states since it gives a more accurate picture of the spread of the data.

For similar question on IQR.

https://brainly.com/question/17083142

#SPJ11

a) The power series representation of f(x) = 1/5 + x f(x) centered at x = 0 is f(x) = sigma^infinity_n = 0 ((x/5)^n)

b) The interval of convergence is (-5, 5)

To find the power series representation of f(x), we can use the formula for the geometric series

1 / (1 - r) = sigma^infinity_n = 0 (r^n)

where r is a constant.

In this case, we have

f(x) = 1/5 + x f(x)

We can solve for f(x) to get

f(x) = 1/5 / (1 - x)

Using the formula for the geometric series with r = x/5, we have

f(x) = sigma^infinity_n = 0 ((x/5)^n)

Multiplying both sides by 5, we get

5f(x) = sigma^infinity_n = 0 (x^n

So the power series representation of f(x) centered at x = 0 is

f(x) = sigma^infinity_n = 0 ((x/5)^n)

To determine the interval of convergence, we can use the ratio test

| (x/5)^(n+1) | / | (x/5)^n | = |x/5|

The series converges if the limit of |x/5| as n approaches infinity is less than 1. This is true when |x| < 5, so the interval of convergence is (-5, 5).

Learn more about power series here

brainly.com/question/17193241

#SPJ4

Answer:

a=100

Step-by-step explanation:

Considering they left at precise noon, at 12:45 they will be 9 miles apart after they leave the intersection.

Let's call the time it takes for them to be 9 miles apart "t". During this time, the truck will have traveled a distance of 30t, and the car will have traveled a distance of 42t. Since they are traveling in the same direction, we can subtract the distances to find the distance between them:

42t - 30t = 12t

So they are separating at a rate of 12 miles per hour.

To find when they will be 9 miles apart, we can set up the equation:

12t = 9

Solving for t:

t = 9/12

t = 0.75 hours,

To convert 0.75 hours into minutes, we have to multiply it by 60.

= 0.75 × 60

= 45 minutes

So they will be 9 miles apart 45 minutes after they leave the intersection, or at 12:45pm.

To learn more about equation click here

brainly.com/question/29657983

#SPJ4

The solution to the simultaneous equations log₂x − log₂y = 2 and log₂(x − 2y) = 3 is x = 8 and y = 4.

Given the following equations

log₂x − log₂y = 2

log₂(x − 2y) = 3

We can simplify the first equation by using the rule of logarithms that states:

log a - log b = log(a/b)

Using this rule, we have:

log₂(x/y) = 2

Rewriting this in exponential form, we get:

x/y = 2²

xy = 4

Multiplying both sides by y, we get:

x = 4y

Substituting this into the second equation, we get:

log₂(4y − 2y) = 3

log₂(2y) = 3

Rewriting this in exponential form, we get:

2y = 8

Dividing both sides by 2, we get:

y = 4

Substituting this value into the equation 2y = x, we get:

x = 2 * 4

x = 8

Hence, the solution to the simultaneous equations is x = 8 and y = 4.

Read more about simultaneous equations at

https://brainly.com/question/148035

#SPJ1

Complete question

Solve the simultaneous equations :

log2x − log2y = 2

log2(x − 2y) = 3

Answer:

no

Step-by-step explanation:

using Pythagorean theorem:

[tex]26^{2} +42^{2}=50^{2}[/tex]

676+1764=2500

2440=2500

2440<2500

Answer:no

we're estimating, we can round down to the nearest whole number to get an answer of 50. This means Cody can make approximately 50 bags of 4 44 cherries with the cherries she has left.

To estimate the number of bags of 4 44 cherries that Cody can make, we first need to calculate how many cherries she has left after eating 19 1919 cherries on Tuesday.

The number of cherries left will be:

41 4141 - 19 1919 = 22 2222 cherries.

Now, to estimate the number of bags of 4 44 cherries Cody can make, we divide the remaining cherries by 4 44 cherries per bag:

22 2222 ÷ 4 44 ≈ 50.225

Since we're estimating, we can round down to the nearest whole number to get an answer of 50. This means Cody can make approximately 50 bags of 4 44 cherries with the cherries she has left.

learn more about number here

https://brainly.com/question/10547079

#SPJ4

When you flip two coins 28 times, the best prediction possible for the number of times both coins will land on heads is 7 times.

This can be explained with the following calculations:

When flipping a coin, the chance of getting heads or tails is 1/2 or 0.5.

If you flip two coins, the probability of getting two heads is calculated by multiplying the probability of getting heads on the first coin by the probability of getting heads on the second coin, which is (1/2) x (1/2) = 1/4 or 0.25 or 25%.

To calculate the expected number of times both coins will land on heads in 28 flips, we use the following formula:

Expected value = Probability x Total number of flips

Expected value = 0.25 x 28

Expected value = 7

Therefore, the best prediction possible for the number of times both coins will land on heads is 7 times.

It's important to note that this is only a prediction, and the actual number of times both coins land on heads could be more or less than 7.

This is because probabilities are based on chance, and chance outcomes can be unpredictable.

For similar question on probability.

https://brainly.com/question/29061226

#SPJ11

Hence, x has a value of 49 as to find x, we add 9 to both sides and divide the result by 3.

The distance between two intersecting lines or planes is measured in terms of angles. The amount of rotation required to align one of the lines or planes with the other is usually expressed in terms of degrees. The range of an angle is 0 degrees (i.e., no rotation) to 360 degrees (corresponding to a complete rotation).

given

As angles 5 and 7 are a pair of linear angles, their sum must be 180 degrees. Angle 7 therefore has a measure of 180 - 42 = 138 degrees.

We can use the fact that angles 6 and 7 are vertical angles and have the same measure to find the value of x. As a result, we can set the following phrase to indicate that the measure of angle 6 is equal to angle 7:

3x - 9 = 138

In order to find x, we add 9 to both sides and divide the result by 3:

3x = 147

x = 49

Hence, x has a value of 49 as to find x, we add 9 to both sides and divide the result by 3.

To know more about angles visit:

https://brainly.com/question/14569348

#SPJ1

When someone describes a distribution as having a floor effect, it means that the distribution is characterized by a significant clustering of values at the minimum value, creating a skewed distribution with a long tail on the higher end.

This phenomenon is often observed in situations where there is a lower limit or minimum value that restricts the possible range of values that can be observed. The floor effect can be seen in various domains such as clinical trials, educational testing, psychological assessments, and market research, to name a few.

For instance, in a clinical trial, the use of an intervention that is highly effective in reducing symptoms may lead to a large number of participants reaching the minimum score, making it difficult to differentiate between groups in terms of treatment response.

Similarly, in educational testing, a poorly designed test or a test that is too easy for the group being tested may result in a floor effect, where students cluster around the lowest score and scores do not differentiate between students with different levels of knowledge.

A floor effect can be problematic because it can limit the ability to detect differences or changes in scores or performance, which can have implications for interpreting and comparing results across different groups or time points.

For more details about distribution click here:

https://brainly.com/question/29062095#

#SPJ11

Answer: 14x + 10

Step-by-step explanation: The perimeter of the room without the door can be found by adding up the lengths of all four sides:

Perimeter = 2(4x-1) + 2(3x+6)

Simplifying and combining like terms, we get:

Perimeter = 14x + 10

Therefore, the perimeter of the room without the door in simplest form is 14x + 10.

Answer:

Eighty biscuits.

Step-by-step explanation:

We need to find the limiting factor. We can do that by comparing ratio of mass of ingredient given to mass of ingredient needed for 20 biscuits

[tex]Butter:\\800:150\\=16:3\\=5.33\\Sugar:\\700:75=28:3\\=9.33\\Flour:\\1000:180\\=50:9\\=5.56\\Chocolate Chips:200:50\\=4:1\\=4\\[/tex]

We can clearly see that the choco. chips are the limiting factor since it has the lowest ratio, basically meaning we will run out of choco chips before anything else.

[tex]Biscuits=4*20=80[/tex]

Since we only have 4 times the choco chips needed to make 20 biscuits, we can only make 80 biscuits. Now you can see, we have other ingredients left, but choco chips have ran out which is why it was the limiting factor.

[tex]Flour:\\1000-4(180) = 280g[/tex]

After making 4 servings we still have 280g of flour left.

The point would be in quadrant III since both numbers are negative.

Answer: Quadrant III

Step-by-step explanation:

1. Quadrant I has a positive x and y value

2. Quadrant II has a negative x and positive y value

3. Quadrant III has a negative x and negative y value

4. Quadrant IIII has a positive x and negative y value.

Therefore, the answer is Quadrant III.

Answer:

Step-by-step explanation:

9 eggs broke

Answer: 100 cm

Step-by-step explanation:

1. Since the problem tells us that they are similar, we can infer that this larger rectangle is the same rectangle, only bigger.

2. With this information, we can do the equation 49/12.25 because then we will get the amount the rectangle grows by.

3. 49/12.25=4

4. Now, we can multiply the length(25) by 4.

5. 25 x 4=100

6. The length of the larger rectangle is 100.

I hope this helps!

Answer:

under quadratic equation of fatorisation

Answer:

Interpolation and extrapolation are two methods used to estimate data points within or beyond a given set of values.Interpolation is the process of estimating a data point within the given range of values, based on the relationship between the known data points. For example, suppose we have the following data points: (1, 3), (2, 5), and (4, 9). If we want to estimate the value of y for x = 3, we can use interpolation to calculate it based on the trend of the data points within the given range. In this case, we can see that the slope of the line between (2, 5) and (4, 9) is the same as the slope of the line between (1, 3) and (2, 5). Therefore, we can estimate the value of y for x = 3 to be 7, using the trend of the known data points.Extrapolation, on the other hand, is the process of estimating a data point beyond the given range of values, based on the trend of the known data points. For example, suppose we have the same data points as before: (1, 3), (2, 5), and (4, 9). If we want to estimate the value of y for x = 5, we can use extrapolation to calculate it based on the trend of the known data points. In this case, we can see that the slope of the line between (2, 5) and (4, 9) is the same as the slope of the line between (1, 3) and (2, 5). Therefore, we can estimate the value of y for x = 5 to be 11, assuming that the trend of the known data points continues beyond the given range.Here is a graph that shows both interpolation and extrapolation:

{graph attached below}

In the graph, the blue dots represent the known data points. The red line represents the trend of the known data points, which can be used for interpolation and extrapolation. The green dot represents an interpolated data point, while the purple dot represents an extrapolated data point.In summary, interpolation and extrapolation are similar in that they both involve estimating data points based on the trend of the known data points. However, they differ in that interpolation estimates data points within the given range of values, while extrapolation estimates data points beyond the given range of values.

hope this helps!

Assuming a constant growth factor, the population of Gotham City grew by approximately 4.287% each year.

This can be calculated using the formula for exponential growth, which is:
y = a * (1 + r)^t
Where: y = final value of the population
a = initial value of the population
r = annual growth rate expressed as a decimal
t = number of years

For this problem, let's assume that the initial population of Gotham City was 100,000 and that the population grew for 10 years.

Using these values, we can calculate the annual growth rate as follows:

100,000 * (1 + r)^10 = final population
r = (final population / 100,000)^(1/10) - 1

Plugging in a final population of 148,644 (which is a 48.644% increase from the initial population),

r = (148,644 / 100,000)^(1/10) - 1r = 0.04287 (rounded to 5 decimal places)

Therefore, the annual growth rate (or percentage increase) is approximately 4.287% (rounded to 3 decimal places).

To know more about growth rate refer here:

https://brainly.com/question/13870574

#SPJ11

The events that are independent are,

1) Henry rolling a multiple of 2 and landing on a red portion of the spinner.

2) Two pairs of socks being randomly chosen from a drawer, Hayden choosing a black pair of socks, putting them on, and then choosing another black pair.

3) Olivia choosing an ace and the dart hitting the bull's-eye

1) Henry rolling a multiple of 2 and landing on a red portion of the spinner.

2) Two pairs of socks being randomly chosen from a drawer, Hayden choosing a black pair of socks, putting them on, and then choosing another black pair.

3) Olivia choosing an ace and the dart hitting the bull's-eye.

The other events are dependent because the outcome of the first event affects the outcome of the second event. Specifically

1) Sarah picking a number less than 5 and then picking an odd number. The second event depends on the outcome of the first event.

2) A number cube being rolled and a spinner being spun. The two events are independent of each other, but the outcomes of each event are not independent.

3) Two cards being randomly chosen from a standard deck, and Eliza choosing a jack, replacing it, and then choosing a black card. The outcome of the second event depends on the outcome of the first event, and the outcome of the first event affects the composition of the deck for the second event.

Learn more about independent event here

brainly.com/question/30905572

#SPJ4

The given question is incomplete, the complete question is:

Which events are independent? Check all that apply. Each number 1 through 10 is written on a slip of paper, placed in a hat, and randomly picked. Sarah picks a number less than 5, keeps it, and then picks an odd number. A number cube is rolled and a spinner is spun. Henry rolls a multiple of 2 and lands on a red portion of the spinner. Two cards are randomly chosen from a standard deck. Eliza chooses a jack, replaces it, and then chooses a black card. Two pairs of socks are randomly chosen from a drawer. Hayden chooses a black pair of socks, puts them on, and then chooses another black pair. A card is randomly chosen from a standard deck and a dart is randomly thrown. Olivia chooses an ace and the dart hits the bull’s-eye.

The total number of different dinner special combinations offered by Lewis' Restaurant is 28 different dinner special combinations.

Lewis' Restaurant offers a dinner special that consists of a main dish, a vegetable, a salad, and a roll.

There are 4 main dishes, 7 vegetables, 1 salad, and 1 type of roll to choose from.

To determine the total number of different dinner special combinations that Lewis' offers, you have to multiply the number of options available for each course.

To find the total number of different dinner special combinations offered by Lewis' Restaurant, you have to use the multiplication rule.

The multiplication rule states that if an event can occur in 'a' different ways and another independent event can occur in 'b' different ways,

then the two events can occur in 'a x b' different ways.

Therefore, the total number of different dinner special combinations offered by Lewis' Restaurant can be calculated as follows:

4 main dishes × 7 vegetables × 1 salad × 1 type of roll= 28 different dinner special combinations

Note that we multiply the number of options for each course because the courses are independent.

This means that the choice of the main dish does not affect the choice of the vegetable, salad, or roll, and vice versa. Therefore, we can multiply the number of options for each course to determine the total number of different dinner special combinations that Lewis' Restaurant offers.

For similar question on combinations.

https://brainly.com/question/29089154

#SPJ11

The two planes will meet 6 hours after they start, i.e. at 3 pm.

Two planes leave at 9 am from airports that are 2700 miles apart and fly towards each other at a speed of 200 mph and 250 mph. At what time will they pass each other?

Let's assume the planes A and B leave the two airports that are 2700 miles apart at the same time. The speed of the first plane is 200 mph and the speed of the second plane is 250 mph. To find out the time at which they pass each other, we need to calculate the distance between them and divide it by the sum of their speeds.

Distance traveled by the first plane in time t1 is equal to 200t1.Distance traveled by the second plane in time t2 is equal to 250t2.The distance covered by the first plane and the second plane together will be 2700 miles.Time taken by both the planes to meet can be calculated as below:

t1 + t2 = 2700/(200+250) = 6 hoursAs both the planes start at 9 am, they will meet each other after 6 hours of their journey. Therefore, they will pass each other at 3 pm. This is the required answer. Explanation: So, the two planes will meet 6 hours after they start, i.e. at 3 pm.

To know more about  distance refer here :

https://brainly.com/question/6548083

#SPJ11

There are 84 different combinations of 3 books that can be selected from a stack of 9 books. Each combination can be arranged in 6 different ways, resulting in a total of 504 ways.

The number of ways to select 3 books from a stack of 9 books and arrange them in the empty space on the bookshelf can be calculated using the combination formula and the permutation formula.

First, we need to calculate the number of combinations of 3 books that can be selected from the stack of 9 books:

C(9,3) = 9! / (3! * (9-3)!) = 84

This means there are 84 different combinations of 3 books that can be selected from the stack.

Next, we need to calculate the number of ways that each combination of 3 books can be arranged in the empty space on the bookshelf. Since we have 3 spaces on the bookshelf, we can use the permutation formula to calculate the number of ways that 3 books can be arranged in 3 spaces:

P(3,3) = 3! = 6

This means that there are 6 different ways that each combination of 3 books can be arranged on the bookshelf.

To calculate the total number of ways to select 3 books from the stack and arrange them on the bookshelf, we can multiply the number of combinations by the number of permutations:

Total number of ways = C(9,3) * P(3,3) = 84 * 6 = 504

Therefore, there are 504 different ways to select 3 books from the stack and arrange them on the bookshelf.

To know more about different ways:

https://brainly.com/question/28643347

#SPJ4

The number of Dutch men taller than 190 cm is approximately 100.

The proportion of men taller than 190 cm is estimated using the normal distribution.

We'll be using a normal distribution, which requires the mean and standard deviation of the height data.

The percentage of Dutch men who are over 190 cm tall can be estimated using a normal distribution model.

We must first determine the mean and standard deviation of the heights.

For the population mean and standard deviation, we use the following values.

μ = 181 cm (the mean of Dutch men's heights)

σ = 7 cm (standard deviation)We may now convert the height of 190 cm to a z-score, which is a standard score that represents the number of standard deviations from the mean of the distribution.

The z-score is calculated using the following formula: Z = (X - μ) / σ

where X is the height of 190 cm,

μ is the population mean,

and σ is the population standard deviation.

Z = (190 - 181) / 7 = 1.2857

We look up the percentage corresponding to this z-score in the standard normal distribution table.

Using the table, we can see that the percentage of individuals with a z-score greater than 1.2857 is 0.1003.

We will use this percentage to estimate the number of Dutch men over 190 cm tall in a random sample of 1000 men.0.1003 * 1000 = 100.3

The number of Dutch men taller than 190 cm is approximately 100.

To the nearest whole number, we round this up, and the expected number of men taller than 190 cm in a random sample of 1000 Dutch men is 101.

For similar question on distribution.

https://brainly.com/question/29285666

#SPJ11

The perimeter of the rectangle is equal to (8x² + 38) units.

The perimeter of a rectangle is the sum of length of its four sides or the sum of its length and breadth, multiplied by two.

length = (4x² - x + 9y) units

breadth = (x + 10y) units

perimeter = 2×(length + breadth)

perimeter of the rectangle = 2(4x² - x + 9y + x + 10y) units

perimeter of the rectangle = 2(4x² + x - x + 9y + 10y) units

perimeter of the rectangle = 2(4x² + 19y) units

perimeter of the rectangle = (8x² + 38y) units

Therefore, the perimeter of the rectangle is equal to (8x² + 38) units.

Read more about rectangle here:https://brainly.com/question/17297081

#SPJ1

Answer: -5 ≤ x ≤ 0.

Step-by-step explanation:

To solve the inequality, we need to consider two cases:

Case 1: -2x - 5 ≤ 5

Adding 5 to both sides gives:

-2x ≤ 10

Dividing both sides by -2 and reversing the inequality:

x ≥ -5

Case 2: -(-2x - 5) ≤ 5

Simplifying:

2x + 5 ≤ 5

Subtracting 5 from both sides gives:

2x ≤ 0

Dividing both sides by 2:

x ≤ 0

Therefore, the solution set is -5 ≤ x ≤ 0.

The probability that the average lifetime of 100 components is less than 4650 hours is 0.62%.

Using the Central Limit Theorem, we can find the probability that the average lifetime of 100 components is less than 4650 hours.

Let x represent the average lifetime of 100 components. The mean and standard deviation of x can be found using the following formulas:

Mean of x = 5000 hours

Standard Deviation of x = 200/sqrt(100) = 20 hours

To find the probability that the average lifetime of 100 components is less than 4650 hours, we need to use the normal distribution formula. This can be written as follows:

P(X < 4650)

⇒ P(Z < (4650-5000)/20)

⇒ P(Z < -2.5)

Using a standard normal table, the probability of Z being less than -2.5 is 0.0062, or 0.62%. Therefore, the probability that the average lifetime of 100 components is less than 4650 hours is 0.62%.

Learn more about probability here:

brainly.com/question/30034780

#SPJ11

Exponential notation is useful in this scenario because it can help us quickly calculate the total number of amoebas that exist after a certain number of hours without having to write out each step of the division process.

Exponential notation, also known as scientific notation, is a way of representing a number as a product of two factors: a coefficient and a power of 10. The coefficient is a number between 1 and 10, and the power of 10 indicates how many places the decimal point must be moved to obtain the original number.

In the given scenario, we can see that each amoeba doubles every hour, which is an example of exponential growth. Using exponential notation, we can represent the number of amoebas after n hours as 2^n. For example, after 2 hours, there would be 2^2 = 4 amoebas, and after 3 hours, there would be 2^3 = 8 amoebas.

Learn about exponential notations here https://brainly.com/question/30239895

#SPJ1