Answer:
300
Explanation:
Las legumbres son semillas de plantas grandes, carnosas y coloridas. Los frijoles, los guisantes (arvejas) y las lentejas son todos tipos de legumbres.
which method is used to separate salt form salt solution
Explanation:
As we know, salt and water have different boiling points. Hence, we can use the "evaporation" technique to separate salt from salt solution. For this, one has to simply heat the salt solution till all the water boils and evaporates, and salt is left behind.
....welcome......
This image shows electronegativities of elements on the periodic table. Based on this information, which element is most likely to form a strong ionic bond and take on electrons?
(1 point)
helium (He)
cesium (Cs)
fluorine (F)
hydrogen (H)
Answer:
The answer is C. Fluorine.
The figure above shows two closed containers. Each contains the same volume of acetone in equilibrium with its
Yanar at the same temperature. The vapor pressure of the acetone is
The vapor pressure of a liquid and the prevailing atmospheric pressure,
determines the boiling point temperature.
The vapor pressure of the acetone is the same in both containers because
the temperature is the same.
Reasons:
The vapor pressure of a liquid is the pressure at which the number of
molecules entering the gaseous phase are in (dynamic) equilibrium with
the number of molecules entering the liquid phase.
The factors that affect vapor pressure are;
The type of molecules that make up the liquid or solidThe temperature of the liquid or solidChanging the surface area changes the instantaneous concentration of
molecules of vapor above the liquid, however, an equilibrium vapor
pressure is reached with time as more molecules enter or exits the liquid
(or solid) due being over or under saturated.
Therefore, the surface area of the liquid has no effect on a liquid's vapor
pressure therefore;
The vapor pressure in both containers will be the same because the temperature is the same.
Learn more here:
https://brainly.com/question/15171390
https://brainly.com/question/20301336
During the process of peer review, a scientific study must have:
Group of answer choices (( its not precision//validity ))
repetition
precision
accuracy
validity
Answer:
Accuracy
I guess
Cause then it makes sense
Hope this helps
please help with the question attached
I need it in an hour
Answer:
iiiiiiddddiiilllooeiuehe
Inside the box is a list of endangered animals in the Philippines. Group the animals in three ways and make a diagram of your groupings in the space below.
A car moves with a velocity of 15 m/s west for 3 seconds. Then, the
car moves with a velocity of 15 m/s east for 1 second. What is the
total displacement of the car?
Answer:
450 metre
Explanation:
VELOCITY = DISPLACEMENT /TIME TAKEN. THEREFORE THE DISPLACEMENT = 450 M.
Explanation:
Which subatomic particle has a positive charge?
Question 1 options:
all particles
neutron (n0)
proton (p+)
electron (e-)
Question 2 (2 points)
What information does the atomic mass of an element provide?
Question 2 options:
the difference between the number of protons and electrons (p - e)
the number of isotopes
the sum of electrons and protons in an atom (e + p)
the number of protons and neutrons in an atom (p + n)
Question 3 (2 points)
What is the atomic number of an atom?
Question 3 options:
the number protons and neutrons
the number of protons
the number of neutrons
the number of electrons and neutrons
Question 4 (2 points)
What is H2O (water) classified as?
Question 4 options:
a diatomic molecule
an atom
an element
a molecule
Question 5 (2 points)
Which property is a physical property?
Question 5 options:
easy to digest
becomes moldy quickly
does not burn
malleable (the quality of something that can be shaped into something else without breaking )
Question 6 (2 points)
What state of matter has a defined volume but undefined shape?
Question 6 options:
solids and liquids
liquids
liquids and gases
gases
Question 7 (2 points)
Which statement best describes the difference between a physical change and a chemical change?
Question 7 options:
A chemical change does not result in a new substance being formed, whereas a physical change does.
A chemical change results in a new element being formed, and a physical change results in a new compound being formed.
A physical change produces a new element, and a chemical change results in a bond breaking between atoms.
A physical change is a change from one state of matter to another; a chemical change results in a new substance formed.
Question 8 (2 points)
Where are nonmetals located in the periodic table?
Question 8 options:
in the middle
along the bottom
along the upper left side
along the upper right side
Question 9 (2 points)
The elements fluorine (F), chlorine (Cl), and Iodine are all part of the same ____________________ on the periodic table.
Question 9 options:
period
group
Question 10 (2 points)
How are elements arranged on the periodic table?
Question 10 options:
atomic mass (# of protons and neutrons)
atomic number (# of protons)
density
boiling point
Help please ill give 100 points
Answer:
SCORE WARNING ! ! ! (JUST FINISHED MY TEST AND GOT A B IM NOT SURE WHICH ONE WAS INCORRECT btw it was the K12 8th grade test)
1. C / Proton (p+)
2. D / the number of protons and neutrons in an atom (p + n)
3. B / the number of protons
4. D / a molecule
5. B / becomes moldy quickly
6. D / gases
7. D / A physical change is a change from one state of matter to another; a chemical change results in a new substance formed.
8. D / upper right side
9. B / group
10. B / atomic number (# of protons)
Explanation:
I just took the test
The positively charged subatomic particles are called protons. The mass number of an atom is the sum of number of protons and neutrons and the atomic number is the number of protons.
What is an atom?An atom is the basic unit every substances. It is made up of subatomic particles electrons, protons and neutrons. The positively charged particles are called protons. Whereas electrons are negatively charged.
The atomic number is the number of protons and the mass number indicates the sum of number of protons and neutrons.
Water can be classified as a diatomic molecule formed from two hydrogens and one oxygen atom. Among the given, malleability is a physical property. It is the ability to change the shape and size of metal blocks.
Liquids has definite volume but does not have a defined shape. They assume shape of the container.A physical change is a change from one state of matter to another; a chemical change results in a new substance formed.
Nonmetals are located in the side upper right side of periodic table. Metals are covered in left and middle portion. The elements F, Cl are in same group. All the elements are arranged in periodic table based on their atomic number.
To find more on periodic table refer here:
https://brainly.com/question/11155928
#SPJ2
What is the molality of a solution containing 10.0 G of NA2 S04 and 1000.0 G of water
Explanation:
1 literThe total of water is equal to 1000.0 g of water
we need to find the molality of a solution containing 10.0 g of dissolved in Na₂S0₄1000.0 g of water
1. For that find the molar mass
Na: 2 x 22.99= 45.98
S: 32.07
O: 4 x 16= 64
The total molar mass is 142.05
We have to find the number of moles, y
To find the number of moles divide 10.0g by 142.05 g/mol.
So the number of moles is 0.0704 moles.
For the molarity, you need the number of moles divided by the volume. So, 0.0704 mol/1 L.
The molarity would end up being 0.0704 M
The molality of a solution containing 10.0 g of Na2SO4 dissolved in 1000.0 g of water is 0.0704 Mliter
What element has the electron configuration 1s22s22p63523p64523d4?
A.Chromium (Cr)
B.Magnesium (Mg)
C.Manganese (Mn)
D.Iron (Fe)
Answer:
B.Magnesium(Mg)
Explanation:
maybe
how many bonding and non bonding domains are on the central atom in NH2-
1bonding and 3non-bonding
(Refer to the attachment for structure
What volume (in L) of 1.10 M FeCl₃ would be required to obtain 0.700 moles of Cl⁻ ions?
0.636 liters of the 1.10 M FeCl₃ solution to obtain 0.700 moles of Cl⁻ ions.
Thus, Volume (L)= moles/ concentration. 0.700 moles of Cl⁻ ions and the concentration of the FeCl₃ solution is 1.10 M, you can plug in these values to calculate the volume.
Volume (L) = 0.700/ 1.10 M,
Volume (L)= 1.10M/ 0.700moles
Volume (L) = 0.700/ 1.10 ≈ 0.636 L
Therefore, approximately 0.636 liters of the 1.10 M FeCl₃ solution to obtain 0.700 moles of Cl⁻ ions.
Learn more about Volume, refer to the link:
https://brainly.com/question/28058531
#SPJ12
Bryan and Alyssa are playing tug-of-war against Daniel and Maria. Bryan and Alyssa are exerting a combined force of 10 N. Daniel and Maria are exerting 12 N of force.
Which of the following has resulted?
A.
a balanced force moving everyone in Daniel and Maria's direction
B.
a balanced force leaving everyone in the same place
C.
an unbalanced force moving everyone in Daniel and Maria's direction
D.
an unbalanced force moving everyone in Bryan and Alyssa's direction
The correct answer is Option (C) An unbalanced force moving everyone in Daniel and Maria's direction.
What is balanced force?The force which is opposite in direction and equal in size.A man pushing a wall is example of balanced force.What is unbalanced force?The force which changes the speed , position and direction of the object to which it is applied is known as unbalanced force ,Turning a cartwheel is an example of unbalanced force.
Why Other options are incorrect? Bryan and Alyssa are exerting a combined force of 10 N.Daniel and Maria are exerting 12 N of forceAs , a result the force applied by the Daniel and Maria is greater then the force applied by Bryan and Alyssa So the direction of Bryan and Alyssa changes.Hence , an unbalanced force moving everyone in Daniel and Maria's direction
Learn more about balanced and unbalanced forces below
https://brainly.com/question/227461
#SPJ2
What was the ratio in the formula for Iron (II)
oxide?
lete
What was the ratio in the formula for Iron (III)
oxide?
DONE
Answer:
In Iron (II) oxide, ratio is 1:1
In iron (III) oxide, ratio is 4:2
[tex].[/tex]
In Iron (II) oxide, ratio is 1:1
What is the importance of iron oxide?Iron oxides are very important components in most soils as they have major influence on chemical, physical, and microbial properties of soils. Because of their nanoparticulate size (usually 5-200 nm), iron oxides possess large specific surface area.
Generally, iron oxides are prevalent, widely used as they are inexpensive, and play an imperative role in many biological and geological processes. They are also extensively used by humans, eg, as iron ores in thermite, catalysts, durable pigments.
When iron is exposed to moisture or oxygen, oxidation occurs. During this chemical reaction, iron is converted into iron oxide. The iron oxide typically has a reddish, flaky appearance that becomes progressively worse over time.
Learn more about iron oxide:
https://brainly.com/question/18500540
#SPJ2
Is it possible to have an electromagnetic wave with a wavelength (a) of 104.68 m and an energy of 3.25 x 10-27 J? Show your work.
2. You work for an environmental company as an environmental toxicologist and have been hired to determine the contaminant present in a local resident’s pool. Create a flow chart outlining how you would detect the possible presence of Fe2+ and/or Sr2+
how many sodium ions are designated as bound?
Answer:
3
Explanation:
3
write short notes on the following:1. Analytical chemist 2. Chemical engineer 3. Healthcare scientists 4. Forensic scientist 5. Research scientist 6. Toxicologists 7. Pharmaceutical chemist 8. Nuclear chemist 9. Industrial chemist.
1. What atoms make up a molecule of Water?
2. What atoms make up a molecule of Carbon Dioxide?
I would appreciate it if this got answered and I will mark as brainliest, thank you.
Explanation:
Atoms join together to form molecules. A water molecule has three atoms: two hydrogen (H) atoms and one oxygen (O) atom
Carbon dioxide is a colorless and non-flammable gas at normal temperature and pressure. Although much less abundant than nitrogen and oxygen in Earth's atmosphere, carbon dioxide is an important constituent of our planet's air. A molecule of carbon dioxide (CO2) is made up of one carbon atom and two oxygen atoms.
I hope you got it..... ♥️
Answer:
1) 1Atoms join together to form molecules. A water molecule has three atoms: two hydrogen (H) atoms and one oxygen (O) atom. **
2) Although much less abundant than nitrogen and oxygen in Earth's atmosphere, carbon dioxide is an important constituent of our planet's air. A molecule of carbon dioxide (CO2) is made up of one carbon atom and two oxygen atoms. Carbon dioxide is an important greenhouse gas that helps to trap heat in our atmosphere. ^^
mass=35g, density=5g/cm3. what is the volume?
Answer:
7 cm^3
Explanation:
Density = Mass/Volume
5 = 35/x
multiply both sides by x to get
5x = 35
then divide by 5
so x = 7 cm^3
Please help. Thank you!
what is the electron configuration of uranium at its ground state (in order) AND noble gas configuration?
Answer: Uranium is a chemical element with atomic number 92 which means there are 92 protons and 92 electrons in the atomic structure. The chemical symbol for Uranium is U. Electron configuration of Uranium is [Rn] 5f3 6d1 7s2. Possible oxidation states are +3,4,5,6.
Explanation:
Answer:
Electron configuration of uranium at its ground state: 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 4d10 5s2 5p6 4f14 5d10 6s2 6s6 5f3 6d1 7s2
Noble gas configuration: [Rn] 5f3 6d1 7s2.
which of the following is a physical property of the salt crystals shown here?
A.they are gas
B.they cannot burn
c.they are a liquid
D. they are clear white
Answer:
As the explanation i think the answer is D
Explanation:
Transparent and colourless in crystalline form – rather like ice. Crystallises in the isometric system, usually in the form of cubes. Soluble in water (35.6g/100g at 0°C and 39.2g/100g at 100°). Slightly soluble in alcohol, but insoluble in concentrated hydrochloric acid.Physical properties: Sodium chloride is a white crystalline solid with a density of 2.16 g/mL, and a melting point of 801 °C. It is also available as aqueous solutions of different concentrations, called saline solutions. Chemical properties: Sodium chloride is readily soluble in water and other polar solvents.
why does it smell like burning when i turn my heat on?
Answer:
your lightbulb is mot likely burnt out
Explanation:
Which grouping shows a decrease in Intermolecular
Forces of Attraction?
A) gas, liquid, solid B) liquid, solid, gas
C) solid, liquid, gas D) solid, gas, liquid
Answer:
C) solid, liquid, gas
Explanation:
Which grouping shows a decrease in Intermolecular
Forces of Attraction?
A) gas, liquid, solid B) liquid, solid, gas
C) solid, liquid, gas D) solid, gas, liquid
the further the particles are from each other, the less the intermolecular attraction they are farthest in a gas, then a liquid, and closest in a solid
what is the potential energy of a 3 kg box lifted to 12.5 meters high?
Answer:
367.5 JExplanation:
The potential energy of a body can be found by using the formula
PE = mgh
where
m is the mass
h is the height
g is the acceleration due to gravity which is 9.8 m/s²
From the question we have
PE = 3 × 9.8 × 12.5 = 367.5
We have the final answer as
367.5 JHope this helps you
1- Calcium Hydroxide + Calcium Bicarbonate
2- Calcium Bicarbonate + Sodium Carbonate
3- Calcium Sulphate + Sodium Carbonate
4- Sodium compound + Calcium Sulphate
5- Carbon dioxide + Calcium Carbonate
6- Calcium Bicarbonate + Calcium Carbonate
Remember these followings :-
Acid + Base = salt + water
Acid + metal = salt + hydrogen
Acid + carbonates = salt + water + carbon dioxide
Base + ammonium salt = salt + ammonia + water
Base + acidic oxide = salt + water
I hope that you will be clear via these formulas.
(b) A student states, "When the alcohol sample was at a temperature of 500 K, all the particles
were moving faster than any of the particles were moving at 400 K." Do you agree or disagree
with this student's statement? Justify your answer.
B
I
Submit
514
alel
(c) Using boxes like the ones below, draw three particle diagrams representing the sample of
alcohol cooling in this experiment. The diagrams should represent the sample at 3 minutes, 12
minutes, and 17 minutes.
Sign out
09:50
The kinetic energy of particles depends on temperature. As temperature increases, the kinetic energy of particles increases.
Temperature is defined as a measure of the average kinetic energy of the molecules of a substance. The higher the temperature of a substance the greater its kinetic energy.
From the foregoing, when the temperature is increased from 400K to 500K, greater kinetic energy is imparted to the molecules of the substance hence they move faster according to the kinetic theory of matter.
Learn more: https://brainly.com/question/10079361
Pleaseee helppp!!!!!
Answer:
it releases energy that is used for power
Explanation:
Answer: It releases energy that is used for power.
Explanation: https://www.investopedia.com/terms/h/hydrocarbon.asp
Substances like liquid mercury are very ______, but substances like rubber are very _______
Answer:
electrons form the atoms f one material may move to the atoms of the other material. The movement of electrons from one atom to another changes the charge of the atoms. When an atom loses electrons, it is left with more protons than electrons, so it then has a positive charge. when an atom gains electrons, it has more electrons than protons so its charge is negative.
Explanation:
Which of the operations results in sublimation?
Answer:
hrjfnd
Explanation:
hfhdhfujduejdjdjdbfudbdjdbdifhdudjdufb
What volume of hydrogen gas forms if 10.0 g of Zn reacts at STP?
Answer:
0.690 liters is the volume of hydrogen gas produced if 2.00 grams of zinc is used with an excess of hydrochloric acid.
Explanation:
Zn(s)+2HCl(aq)\rightarrow ZnCl_2(aq)+H_2(g)Zn(s)+2HCl(aq)→ZnCl2(aq)+H2(g)
Mole so zinc = \frac{2.00}{65 g/mol}=0.03077 mol65g/mol2.00=0.03077mol
According to reaction, 1 mole of zinc gives 1 mole of hydrogen gas.
Then 0.03077 mole of zinc will give :
\frac{1}{1}\times 0.03077 mol=0.03077 mol11×0.03077mol=0.03077mol of hydrogen gas
Pressure of hydrogen gas ,P= 1 atm
Temperature of of hydrogen gas ,T= 273.15 K
Volume of hydrogen gas = V = ?
Moles of hydrogen gas = 0.03077 mol
PV = nRT (Ideal gas equation )
V=\frac{nRT}{P}=\frac{0.03077 mol\times 0.0821 atm L/mol K\times 273.15 K}{1 atm}V=PnRT=1atm0.03077mol×0.0821atmL/molK×273.15K
V = 0.690 L