The total pressure inside the container is 4.00 atm. This is because the total pressure of a gas mixture is equal to the sum of the individual pressures of each gas present. In this case, we have 2.50 atm of N2 gas and 1.50 atm of O2 gas.
When these two values are added together, we get the total pressure of 4.00 atm. This total pressure is also known as the partial pressure of the gas mixture.
The partial pressure of the gas mixture is the sum of the individual partial pressures of each gas present. Since the total pressure of a gas mixture is equal to the sum of the individual pressures of each gas present, the total pressure in the container is 4.00 atm.
Know more about Total pressure here
https://brainly.com/question/30255561#
#SPJ11
Nicolaas' model demonstrates that and are primarily responsible for the movement of water on earth
Nicolaas' model is a scientific model that explains the movement of water on Earth. According to the model, the two primary factors responsible for the movement of water on Earth are evaporation and precipitation.
Evaporation occurs when water changes from a liquid to a gas state due to heat from the sun. This process results in the formation of water vapor that rises into the atmosphere. Precipitation occurs when water vapor condenses in the atmosphere and falls back to the surface as rain, snow, or hail. These two processes play a critical role in the water cycle, which is essential for the survival of life on Earth. Therefore, Nicolaas' model highlights the significance of evaporation and precipitation in the movement of water on Earth.
Learn more about Nicolaas' model at https://brainly.com/question/15923461
#SPJ11
Determine the number of moles present in each compound. 6.50 g ZnSO4.
The number of moles present in 6.50g of ZnSO4 is 0.0403 moles.
How to calculate no of moles?The number of moles in a substance can be calculated by dividing the mass of the substance by its molar mass as follows:
no of moles = mass ÷ molar mass
According to this question, 6.50 grams of zinc sulphate is given. The number of moles in the substance can be calculated as follows:
molar mass of zinc sulphate = 161.47 g/mol
no of moles = 6.50g ÷ 161.47 g/mol
no of moles = 0.0403 moles
Learn more about moles at: https://brainly.com/question/20928252
#SPJ1
Use the scenario to answer the question. a student is examining scientific evidence to support the following claim. ""life is possible because of the unique mixture of gases that cycle through the earth’s spheres."" which evidence best supports the student’s claim?
The evidence that best supports the student's claim that "life is possible because of the unique mixture of gases that cycle through the Earth's spheres" is the presence and balance of oxygen, nitrogen, and carbon dioxide in the atmosphere.
These gases play a crucial role in maintaining life on Earth by supporting respiration, regulating temperature, and enabling the carbon cycle, which allows organisms to exchange and utilize carbon for growth and energy production.
Oxygen: Oxygen is a vital gas for sustaining life on Earth. It is a key component of the atmosphere, making up about 21% of its composition. Oxygen is essential for respiration, the process by which organisms extract energy from food.
Through respiration, organisms break down glucose (derived from food) and use oxygen to produce energy-rich molecules called adenosine triphosphate (ATP).
This energy is necessary for cellular functions and metabolic activities. Many organisms, including humans, require oxygen to survive.
Nitrogen: Nitrogen is the most abundant gas in the Earth's atmosphere, accounting for approximately 78% of its composition. Although nitrogen is relatively inert and does not directly participate in biological processes, it is crucial for life.
Nitrogen is an essential component of amino acids, proteins, and nucleic acids (DNA and RNA), which are fundamental building blocks of life. Nitrogen fixation, a process carried out by certain bacteria, converts atmospheric nitrogen into forms that can be used by plants and other organisms.
This allows nitrogen to enter the food chain and support the growth and development of living organisms.
Carbon Dioxide: Carbon dioxide is a greenhouse gas and an integral part of the Earth's carbon cycle. It plays a significant role in regulating the planet's temperature through the greenhouse effect.
Carbon dioxide traps heat in the atmosphere, preventing excessive heat loss into space and maintaining a suitable temperature range for life. Additionally, carbon dioxide is essential for photosynthesis, a process carried out by plants and other autotrophic organisms.
During photosynthesis, carbon dioxide is absorbed, and with the help of sunlight, it is converted into glucose and oxygen. This process not only provides oxygen for respiration but also allows organisms to utilize carbon for growth, energy production, and the formation of organic compounds.
To learn more about glucose, refer below:
https://brainly.com/question/30548064
#SPJ11
Assume that you put the same amount of room-temperature air
in two tires. if one tire is bigger than the other, how will air
pressure in the two tires compare?
the bigger tire will have greater air pressure.
b the smaller tire will have greater air pressure.
both tires will have the same air pressure.
dnot enough information is provided to know the
answer
The larger tire will have a greater volume, but the amount of air in each tire is the same, so the pressure in both tires will be the same. The correct answer is the option: C.
The pressure of a gas is related to its temperature, volume, and the number of molecules present, according to the Ideal Gas Law: PV = nRT,
Assuming the temperature, number of molecules, and the amount of air in both tires are the same, the pressure of the air in the tires will depend only on the volume of the tires. Therefore, both tires will have the same air pressure. The correct answer is C.
To know more about Ideal Gas Law, here
brainly.com/question/13821925
#SPJ4
--The complete Question is, Assume that you put the same amount of room-temperature air in two tires. if one tire is bigger than the other, how will air pressure in the two tires compare?
A. the bigger tire will have greater air pressure.
B. the smaller tire will have greater air pressure.
C. both tires will have the same air pressure. --
The electron configuration for the element bismuth, (Bi, atomic #83) is: ? 1s22s22p63s23p64s24d104p65s25d105p66s26d106p3 ? 1s22s22p63s23p64s23d104p65s24d105p66s24f145d106p3 ? 1s22s22p63s23p64s23d104p65s24d105p66s25d106p3 ? 1s22s22p63s23p64s24d104p65s25d105p66s26f146d106p3
The correct electron configuration for bismuth is 1s² 2s² 2p⁶ 3s² 3p⁶ 3d¹⁰ 4s² 4p⁶ 4d¹⁰ 5s² 5p⁶ 6s² 4f¹⁴ 5d¹⁰ 6p³. Option 2.
Electron configuration of elementsBismuth has an atomic number of 83, and hence, has 83 electrons.
According to the Aufbau principle, electrons fill up orbitals in order of increasing energy levels; s, p, d, and f with a maximum electron of 2, 6, 10, and 14 respectively.
The electron configuration for bismuth can be written by following this principle, starting from the first energy level and moving up to the sixth energy level.
Therefore, the electron configuration for bismuth is 1s² 2s² 2p⁶ 3s² 3p⁶ 3d¹⁰ 4s² 4p⁶ 4d¹⁰ 5s² 5p⁶ 6s² 4f¹⁴ 5d¹⁰ 6p³.
More on electron configurations can be found here: https://brainly.com/question/29757010
#SPJ1
Ensure the Sales worksheet is active. Enter a function in cell B8 to create a custom transaction number. The transaction number should be comprised of the item number listed in cell C8 combined with the quantity in cell D8 and the first initial of the payment type in cell E1. Use Auto Fill to copy the function down, completing the data in column B.
Enter a nested function in cell G8 that displays the word Flag if the Payment Type is Credit and the Amount is greater than or equal to $4000. Otherwise, the function will display a blank cell. Use Auto Fill to copy the function down, completing the data in column G.
Create a data validation list in cell D5 that displays Quantity, Payment Type, and Amount.
Type the Trans# 30038C in cell B5, and select Quantity from the validation list in cell D5.
Enter a nested lookup function in cell F5 that evaluates the Trans # in cell B5 as well as the Category in cell D5, and returns the results based on the data in the range C8:F32
In B8, enter the custom transaction number function: `=C8&D8&LEFT(E1,1)`. Use Auto Fill to copy it down column B.
In G8, enter the nested function: `=IF(AND(E8="Credit",F8>=4000),"Flag","")`. Auto Fill it down column G.
In D5, create a data validation list with Quantity, Payment Type, and Amount.
In B5, type Trans# 30038C. In D5, select Quantity.
In F5, enter the nested lookup function: `=IF(D5="Quantity",VLOOKUP(B5,C8:F32,2,FALSE),IF(D5="Payment Type",VLOOKUP(B5,C8:F32,3,FALSE),IF(D5="Amount",VLOOKUP(B5,C8:F32,4,FALSE),"")))`.
Follow these steps to achieve the desired result in your Sales worksheet.
To know more about nested function click on below link:
https://brainly.com/question/30186413#
#SPJ11
How many moles of O2 are needed to fully combust 5. 67 moles of C4H10?
C4H10(l) + O2(g)→ CO2(g) + H2O(l)
36.855 moles of O2 are needed to fully combust 5.67 moles of C4H10.
To determine the number of moles of O2 needed to fully combust 5.67 moles of C4H10, first, we need to balance the given chemical equation:
C4H10(l) + O2(g) → CO2(g) + H2O(l)
Balanced equation:
C4H10(l) + 13/2 O2(g) → 4 CO2(g) + 5 H2O(l)
Now, we can use stoichiometry to find the moles of O2 required. Here's a step-by-step explanation:
Step 1: Identify the given and unknown values.
Given: moles of C4H10 = 5.67 moles
Unknown: moles of O2
Step 2: Use the balanced equation to find the mole ratio between C4H10 and O2.
Mole ratio (C4H10 : O2) = 1 : 13/2
Step 3: Use the mole ratio to determine the moles of O2 required for complete combustion.
(5.67 moles C4H10) * (13/2 moles O2 / 1 mole C4H10) = X moles O2
Step 4: Calculate the moles of O2.
X = 5.67 * (13/2) = 36.855 moles O2
So, 36.855 moles of O2 are needed to fully combust 5.67 moles of C4H10.
To know more about moles, visit:
https://brainly.com/question/31597231#
#SPJ11
4. For each of the following reactions, indicate whether you would expect the entropy of the
system to increase or decrease, and explain why. If you cannot tell just by inspecting the
equation, explain why.
(a) CH3OH() → CH3OH(g)
(b) N204(g) + 2NO2(g)
(c) 2KCIO3(s) → 2KCI(s) + 302
(d) 2NH3(g) + H2SO4(aq) →(NH4)2SO4(aq)
(a) The entropy of the system would increase. The transition from a liquid to a gas state involves an increase in the number of microstates, which leads to an increase in entropy. Therefore, the entropy of the system will increase as [tex]CH3OH[/tex] transitions from a liquid state to a gas state.
(b) The entropy of the system would increase. The reaction involves the formation of three molecules of gas from one molecule of gas and another molecule that contains two molecules of gas. The increase in the number of molecules leads to an increase in the number of microstates, which results in an increase in entropy.
(c) The entropy of the system would increase. The transition from a solid to a liquid or gas state involves an increase in the number of microstates, which leads to an increase in entropy. Therefore, the entropy of the system will increase as [tex]2KCIO3[/tex] transitions from a solid state to a liquid or gas state.
(d) The entropy of the system would increase. The reaction involves the formation of two molecules of gas from three molecules of gas and one molecule of aqueous substance. The increase in the number of molecules leads to an increase in the number of microstates, which results in an increase in entropy.
To know more about entropy refer to-
https://brainly.com/question/13135498
#SPJ11
What is the percent dissociation of HNO2 when 0. 058 of sodium nitrate is added to 110. 0ml of a 0. 060 M HNO solution? K, for HNO2 is 4. 0x10^-4
The percent dissociation of HNO₂ comes out to be 5.2% which is shown in the below secion.
The calculations of pKa is done as follows-
pKa = - log Ka
= - log (4.0 x 10⁻⁴)
= 3.398
Mole of NaNO₂ = mass / molar mass
= 0.058 g / 68.9953 g/mole
= 8.406 x 10⁻⁴ mole
Mole of HNO₂ = 0.110 L * 0.060 mole / L = 6.6 x10⁻³ mole.
Resulting solution is buffer solution.
pH = pKa + log [salt] / [acid]
Substituting the known values in the above formula.
pH = 3.398 + log ( 8.406 x 10⁻⁴ / 6.6 x 10⁻³ )
pH = 2.503
The pH can also be evaluated using the below expression.
pH = -log[H⁺]
-log[H] = 2.503
[H⁺]= 3.14 x 10⁻³ M
Thus
Percent of ionization = 3.14 x 10⁻³ M x 100 / 0.060 = 5.2 %
To learn more about pH check the link below-
https://brainly.com/question/26424076
#SPJ4
The acid dissociation constant (Ka) for benzoic acid is 6. 3 × 10 ^-5. Find the pH of a 0. 35 m solution of benzoic acid.
The equation for the dissociation of benzoic acid is:
C6H5COOH + H2O ↔ C6H5COO- + H3O+
The expression for Ka is:
Ka = [C6H5COO-][H3O+] / [C6H5COOH]
At equilibrium, the concentration of undissociated benzoic acid will be (0.35 - x), where x is the concentration of dissociated benzoic acid.
Assuming x is small compared to 0.35, we can make the approximation that the concentration of undissociated benzoic acid is 0.35. Therefore, we can write:
Ka = x^2 / (0.35 - x)
Solving for x, we get:
x = √(Ka × (0.35 - x))
x = √(6.3 × 10^-5 × 0.35 - 6.3 × 10^-5 × x)
Squaring both sides:
x^2 = 6.3 × 10^-5 × 0.35 - 6.3 × 10^-5 × x
Bringing all the x terms to one side:
x^2 + 6.3 × 10^-5 × x - 6.3 × 10^-5 × 0.35 = 0
Using the quadratic formula:
x = [-6.3 × 10^-5 ± √(6.3 × 10^-5)^2 + 4 × 6.3 × 10^-5 × 0.35] / 2
x = [-6.3 × 10^-5 ± 1.37 × 10^-3] / 2
x = 6.46 × 10^-4 or x = -7.03 × 10^-5
Since the concentration of benzoic acid cannot be negative, we choose the positive root:
x = 6.46 × 10^-4
The concentration of H3O+ ions is equal to x, so the pH of the solution is:
pH = -log[H3O+]
pH = -log(6.46 × 10^-4)
pH = 3.19
Therefore, the pH of a 0.35 m solution of benzoic acid is 3.19.
To know more about dissociation refer here
https://brainly.com/question/28330679#
#SPJ11
Decomposers, such as bacteria, earthworms, and fungi, are not shown in the food web. How do these organisms receive energy?
A.
Decomposers break down the remains of dead plants and animals.
B.
Decomposers use energy from the Sun to make their own food.
C.
Decomposers consume living plants and animals.
D.
Decomposers do not need energy to survive.
Answer:
A
Explanation:
I believe the answer is A as bacteria feeds in a mode of nutrition known as saprophytism
0. 18 g of a
divalent metal was completely dissolved in 250 cc of acid
solution containing 4. 9 g H2SO4 per liter. 50 cc of the
residual acid solution required 20 cc of N/10 alkali for
complete neutralization. Calculate the atomic weight of
metal.
39.
Ans: 36
0.18 g of a divalent metal was completely dissolved in 250 cc of acid solution containing 4. 9 g H₂SO₄ per liter. 50 cc of the residual acid solution required 20 cc of N/10 alkali for complete neutralization. The atomic weight of metal is 45 g/mol.
First, we need to determine the moles of H₂SO₄ present in 250 cc of the acid solution:
4.9 g/L = 0.0049 g/cc
0.0049 g/cc x 250 cc = 1.225 g of H₂SO₄
Next, we can calculate the number of moles of H₂SO₄ that were neutralized by the alkali solution:
20 cc of N/10 NaOH = 0.002 mol NaOH
Since the reaction is:
H₂SO₄ + 2NaOH → Na₂SO₄ + 2H₂O
then 1 mol of H₂SO₄ reacts with 2 mol of NaOH, therefore 0.004 mol of H₂SO₄ reacted with 0.002 mol of NaOH.
So, the remaining number of moles of H₂SO₄ is:
0.004 mol - 0.002 mol = 0.002 mol
Now we can calculate the moles of metal present in the solution:
0.18 g / atomic weight = moles of metal
We can use the remaining H₂SO₄ to find the number of moles of metal:
1 mol of H₂SO₄ reacts with 1 mol of metal, so the number of moles of metal is equal to the number of moles of H₂SO₄ remaining:
0.002 mol H₂SO₄ = 0.002 mol metal
Now we can solve for the atomic weight:
0.18 g / 0.002 mol = 90 g/mol
Since the metal is divalent, we need to divide by 2 to get the atomic weight:
90 g/mol / 2 = 45 g/mol
Therefore, the atomic weight of the metal is 45 g/mol.
To know more about the neutralization refer here :
https://brainly.com/question/15347368#
#SPJ11
A 0. 495M solution of nitrous acid, HNO2, has a pH of 1. 83
a) Find the percent ionization of nitrous acid in this solution. You may assume the temperature is 25 oC.
b) Calculate the value of Ka for nitrous acid. You may assume the temperature is 25 oC.
c) Using the value of Ka you determined in b), calculate the pH of a solution formed by adding 1. 0 g of NaNO2 to 750 mL of 0. 0125M HNO2. You may assume the temperature is 25 oC
a) The percent ionization of nitrous acid in this 0.495M solution is 2.64%.
b) The value of Ka for nitrous acid is 4.45 x 10⁻⁴.
c) The pH of the solution formed by adding 1.0g NaNO₂ to 750mL of 0.0125M HNO₂ is 2.83.
a) Percent ionization = ([tex]10^-^p^H[/tex] / initial concentration) x 100
Percent ionization = ( [tex]10^-^1^.^8^3[/tex] / 0.495) x 100 = 2.64%
b) Ka = [H⁺][NO₂⁻] / [HNO₂]
Ka = ( [tex]10^-^1^.^8^3[/tex] )² / (0.495 - [tex]10^-^1^.^8^3[/tex] ) = 4.45 x 10⁻⁴
c) 1. Calculate moles of NaNO₂: (1g / 69.0 g/mol) = 0.0145 mol
2. Calculate initial concentration of NO₂⁻: 0.0145 mol / 0.750 L = 0.0193 M
3. Use Henderson-Hasselbalch equation:
pH = pKa + log([NO₂⁻]/[HNO₂])
pH = -log(4.45 x 10⁻⁴) + log(0.0193 / 0.0125) = 2.83
To know more about Henderson-Hasselbalch equation click on below link:
https://brainly.com/question/31732200#
#SPJ11
What volume of solution is required to create a solution of a concentration of 1.3x 10^-2 M from 1.0x 10^-3 moles of calcium hydroxide
Approximately 0.0769 liters (76.9 mL) of solution is required to create a 1.3 x [tex]10^-2[/tex] M concentration of calcium hydroxide using [tex]1.0 x 10^-3[/tex] moles of solute.
A solute is a material that a solvent can dissolve into a solution. A solute can take on various shapes. It might exist as a solid, a liquid, or a gas. Solvent refers to the component of a solution that is most prevalent. It is the fluid in which the solute has been dissolved.
Molarity (M) = moles of solute / volume of solution (L)
Here, you're given the desired molarity ([tex]1.3 x 10^-2[/tex] M) and the moles of solute ([tex]1.0 x 10^-3[/tex]moles). You need to find the volume of solution (in liters).
Volume (L) = moles of solute / Molarity (M)
Now, plug in the given values:
Volume (L) = [tex](1.0 x 10^-3[/tex] moles) / ([tex]1.3 x 10^-2[/tex]M)
Volume (L) ≈ 0.0769 L
For more such question on hydroxide
https://brainly.com/question/21393201
#SPJ11
Choosy moms choose JIF! Your mom is making PB & J sandwiches for you and her. When she looks in the cupboard, she realizes she has 3 slices of bread, 1 jar of peanut butter, and 1/2 jar of jelly. What is the limiting reactant?
In this scenario, the limiting reactant is the ingredient that will run out first and limit the number of sandwiches that can be made.
Assuming that each sandwich requires two slices of bread, one serving of peanut butter, and one serving of jelly, we can see that we have enough bread and jelly to make a maximum of 1.5 sandwiches. However, since we only have one serving of peanut butter, we can only make one sandwich.
Therefore, the peanut butter is the limiting reactant. It is important to identify the limiting reactant in chemical reactions to determine the maximum amount of product that can be formed and to avoid wasting resources.
To know more about the limiting reactant refer here :
https://brainly.com/question/14225536#
#SPJ11
If a student starts with 300. 0 mL of a gas at 17. 0 °C, what would be its volume at 35. 0°C?
The volume of the gas at 35.0°C would be approximately 324.7 mL, assuming a constant pressure of 1 atm.
To solve this problem, we can use the combined gas law, which relates the pressure, volume, and temperature of a gas. The formula :
[tex](P_1 * V_1)[/tex] ÷ [tex]T_1 = (P_2 * V_2)[/tex] ÷ [tex]T_2[/tex]
We can assume that the pressure is constant since it is not mentioned in the problem. Also, we need to convert the temperatures to Kelvin by adding 273.15 to each Celsius temperature.
Using the formula and the given values, we get:
[tex](P_1 * V_1)[/tex] ÷ [tex]T_1 = (P_2 * V_2)[/tex] ÷ [tex]T_2[/tex]
[tex]V_2 = (P_1 * V_1 * T_2)[/tex] ÷[tex](T_1 * P_2)[/tex]
We can plug in the values:
[tex]P_1 = unknown\\V_1 = 300.0 mL \\T_1 = 17.0 + 273.15 = 290.15 K \\P_2 = unknown \\T_2 = 35.0 + 273.15 = 308.15 K[/tex]
Now, we need to assume a pressure value. Let's assume the pressure is constant at 1 atmosphere (atm). We can now solve for [tex]V_2[/tex]:
[tex]V_2 = (P_1 * V_1 * T_2)[/tex] ÷ [tex](T_1 * P_2)[/tex]
[tex]V_2 = (1 atm * 300.0 mL * 308.15 K)[/tex] ÷ [tex](290.15 K * 1 atm)[/tex]
[tex]V_2 = 324.7 mL[/tex]
To know more about combined gas law, here
brainly.com/question/30458409
#SPJ1
Rogue waves are a rare occurrence in which the amplitude of the wave can reach as high as 15 meters. Calculate the energy of rogue wave of this amplitude
To calculate the energy of a rogue wave with an amplitude of 15 meters, we can use the following formula:
E = 0.5ρAv^2
where E is the energy of the wave, ρ is the density of the water, A is the amplitude of the wave, and v is the velocity of the wave.
Assuming the density of water is 1000 kg/m^3 and the velocity of the wave is the standard gravitational acceleration of 9.81 m/s^2 (since rogue waves are caused by the interaction of multiple waves), we can calculate the energy of the rogue wave:
E = 0.5 x 1000 kg/m^3 x π x (15 m)^2 x (9.81 m/s^2)^2
E = 1.22 x 10^9 J
Therefore, the energy of a rogue wave with an amplitude of 15 meters is approximately 1.22 x 10^9 joules.
To know more about rogue refer here
https://brainly.com/question/12121401#
#SPJ11
40g of sodium chloride solution was made to react with 14. 50g of lead trioxonitrate (V)o produce 13. 20g of lead chloride precipitate and sodium
trioxonitrate (v] solution
When sodium chloride solution is added to lead nitrate solution then it results in the formation of a precipitate of lead chloride and sodium nitrate.
Precipitation reactions occur when cations and anions in aqueous solution combine to form an insoluble ionic solid called a precipitate. Whether or not such a reaction occurs can be determined by using the solubility rules for common ionic solids Percent composition tells you which types of atoms (elements) are present in a molecule and their levels. Percent composition can also tell you about the different elements present in an ionic compound as well.
To learn more about precipitation reaction check the link below-
https://brainly.com/question/13016165
#SPJ4
Calculate the volume of 3. 00 M H2SO4 required to prepare 200. ML of 0. 200 N H2SO4. (Assume the acid is to be completely neutralized. )
Approximately 13.3 mL of 3.00 M H₂SO₄ is required to prepare 200. mL of 0.200 N H₂SO₄.
To calculate the volume of 3.00 M H₂SO₄ required to prepare 200. mL of 0.200 N H₂SO₄, we can use the formula for molarity:
Molarity (M) = moles of solute / volume of solution in liters
We can rearrange this formula to solve for volume:
Volume (in liters) = moles of solute / molarity
First, let's calculate the moles of H₂SO₄ in 200. mL of 0.200 N solution:
0.200 N = 0.200 mol/L
Moles of H₂SO₄ = 0.200 mol/L x 0.200 L = 0.0400 mol
Next, we can use this value and the concentration of the 3.00 M H₂SO₄ to calculate the volume of the concentrated acid needed:
Volume = moles of solute / molarity
Volume = 0.0400 mol / 3.00 mol/L
Volume = 0.0133 L or 13.3 mL
So, to make 200 mL of 0.200 N H₂SO₄ , roughly 13.3 mL of 3.00 M H₂SO₄ is required.
To know more about the Volume, here
https://brainly.com/question/31482457
#SPJ4
Calculate the molar solubility of agbr in 2.8×10−2 m agno3 solution. the ksp of agbr is 5.0 * 10-13
The molar solubility of [tex]AgBr[/tex] in [tex]2.8 x 10^-2 M AgNO3[/tex] solution is [tex]7.1 x 10^-7 M[/tex].
To calculate the molar solubility of [tex]AgBr[/tex] in [tex]2.8 x 10^-2 M AgNO3[/tex] solution, we need to use the common ion effect. The [tex]Ag+[/tex] ion is a common ion in both [tex]AgBr and AgNO3[/tex]. When we add [tex]AgNO3[/tex] to a solution containing AgBr, it adds more [tex]Ag+[/tex] ions to the solution and causes a shift in the equilibrium to the left. The solubility of [tex]AgBr[/tex]decreases due to this effect.
The balanced equation for the dissolution of [tex]AgBr[/tex] is:
[tex]AgBr(s) ⇌ Ag+(aq) + Br-(aq)[/tex]
The Ksp expression for AgBr is:
Ksp = [Ag+][Br-] = 5.0 x 10^-13
Let x be the molar solubility of [tex]AgBr[/tex]in [tex]2.8 x 10^-2 M AgNO3[/tex]solution. Then the concentration of [tex]Ag+[/tex] ion is[tex][Ag+] = 2.8 x 10^-2 + x[/tex], and the concentration of [tex]Br-[/tex] ion is[tex][Br-] = x[/tex].
Substituting these values into the Ksp expression, we get:
[tex]Ksp = (2.8 x 10^-2 + x)(x) = 5.0 x 10^-13[/tex]
Simplifying the equation and neglecting x in comparison to [tex]2.8 x 10^-2[/tex], we get:
[tex]x^2 = 5.0 x 10^-13x = sqrt(5.0 x 10^-13) = 7.1 x 10^-7 M[/tex]
To know more about molar solubility refer to-
https://brainly.com/question/28170449
#SPJ11
Consider a gas cylinder containing 0. 100 moles of an ideal gas in a
volume of 1. 00 L with a pressure of 1. 00 atm. The cylinder is
surrounded by a constant temperature bath at 298. 0 K. With an
external pressure of 5. 00 atm, the cylinder is compressed to 0. 500 L.
Calculate the q(gas) in J for this compression process.
According to the question the q(gas) in J for this compression process is 0J.
What is gas ?Gas is a state of matter in which particles are spread out and have enough energy to move around freely. Gas is composed of molecules in constant motion and takes the shape and volume of its container. Gas can be either naturally occurring or man-made and is found in the atmosphere. Examples of naturally occurring gases include oxygen, nitrogen, and carbon dioxide. Man-made gases include helium, chlorine, and hydrogen. Gas is often used as a source of energy and is burned to produce heat, which can be used to power machines and vehicles. Gas is also used in many industries, such as in the production of chemicals and plastics.
In this case, n = 0.100 moles,
[tex]C_v[/tex] = (3/2)R = (3/2)(8.314 J/mol K) = 12.471 J/mol K, and
T₁ = 298.0 K,
T2 = 298.0 K.
Therefore, q(gas)
= nCv (T₂- T₁)
= 0.100 mol × 12.471 J/mol K × (298.0 K - 298.0 K)
= 0 J.
To learn more about gas
https://brainly.com/question/25736513
#SPJ4
Scientists sometimes use chemical reactions to reclaim metals from solutions. They do this to reduce toxic waste. Does this mean that the metal has disappeared? Explain your answer
No, the metal has not disappeared. Chemical reactions only rearrange atoms and do not destroy or create them.
In the case of reclaiming metals from solutions, a chemical reaction is used to separate the metal ions from other elements in the solution, allowing the metal to be recovered in a pure form. This is typically achieved by adding a reactant that will cause the metal ions to precipitate out of the solution as a solid, which can then be separated and processed further to extract the metal.
So, the metal is still present in the reaction mixture, but it is now in a more concentrated and recoverable form. This process is important for reducing the amount of toxic waste generated from industrial processes and can also help to conserve natural resources by recycling valuable metals.
To learn more about reclaiming metals, here
https://brainly.com/question/15018157
#SPJ4
What is the in a 12. 2 L vessel that contains 1. 13 mol of Co2 at a temperature of 42 degrees C?
The pressure of the [tex]Co_{2}[/tex] gas in the 12.2 L vessel at a temperature of 42°C with 1.13 mol of CO2 is 2.12 atm.
The volume of the vessel = 12.2 L
Number of moles of [tex]Co_{2}[/tex] = 1. 13 mol
Temperature = 42 degrees
To calculate the pressure of the gas we need to use the ideal gas law equation.
PV = nRT
P = nRT/V
Assuming that the Universal gas constant R = 0.0821 L·atm/(mol·K).
Converting the temperature degrees into Kelvin scale
T = 42°C + 273.15 = 315.15 K
Substituting the above values into the equation:
P = [(1.13 mol) * (0.0821 L·atm/mol·K)* (315.15 K)] / (12.2 L) = 2.12 atm
Therefore, we can conclude that the pressure of the gas is 2.12 atm.
To learn more about Pressure
https://brainly.com/question/25764275
#SPJ4
The complete question is:
What is the pressure required in a 12. 2 L vessel that contains 1. 13 mol of Co2 at a temperature of 42 degrees C?
Green tea has a ph of 8.2 what is the (oh-) and is it acidic or basic
The (OH⁻) concentration in green tea with a pH of 8.2 is 6.31 x 10⁻⁷ M.
This suggests that the solution is slightly basic in nature. pH is a measure of hydrogen ion concentration, and the higher the pH, the lower the hydrogen ion concentration.
This means that in green tea, there are more hydroxide ions than hydrogen ions present, making it a basic solution.
It is important to note that the pH of green tea can vary depending on the brand and preparation method. Nonetheless, overall, green tea is considered a healthy beverage due to its antioxidant properties and potential health benefits.
To know more about pH click on below link:
https://brainly.com/question/2288405#
#SPJ11
Limiting and Excess Reactants POGIL (Extension Questions)
Limiting reactants are the reagents that are used up first in a chemical reaction, and determine the amount of product that can be formed.
Excess reactants are reagents that, once the limiting reactant has been used up, are still present in the reaction mixture.
The limiting reactant is important because it is the reagent that limits the amount of product that can be produced. When excess reactants are present, they do not contribute to the amount of product that can be produced and are thus considered to be "excess" material.
This excess material can cause problems in a reaction, such as unwanted byproducts or the formation of side reactions. Therefore, it is important to carefully control the amounts of reactants that are used in a reaction to ensure that the desired product is formed in the maximum possible yield.
Know more about Chemical reaction here
https://brainly.com/question/29039149#
#SPJ11
An empty 150 milliliter beaker has a mass of 45 grams. When 100 milliliters of oil is added to the beaker, the total mass is 100 grams. The density of the oil is …
The density of oil is 0.55 g/mL
To determine the density of the oil, first calculate the mass of the oil alone by subtracting the mass of the empty beaker from the total mass: 100 grams (total mass) - 45 grams (empty beaker mass) = 55 grams (mass of oil).
Now, use the formula for density, which is:
Density = Mass / Volume
In this case:
Density of oil = 55 grams (mass of oil) / 100 milliliters (volume of oil) = 0.55 g/mL.
So, the density of the oil is 0.55 g/mL.
To know more about density:
https://brainly.com/question/1354972
#SPJ11
If the boiling point of ethanol went up 6. 8 degrees, how many grams of PbCl4 were added to 2700 grams of ethanol? round to nearest tenth
Approximately 5272.2 grams of PbCl4 were added to 2700 grams of ethanol to increase the boiling point by 6.8 degrees.
To determine the grams of PbCl4 added to 2700 grams of ethanol, causing the boiling point to increase by 6.8 degrees, we will use the molality-based boiling point elevation formula, which is:
ΔTb = Kb * m
Here, ΔTb is the change in boiling point (6.8 degrees), Kb is the molal boiling point elevation constant of ethanol (1.22 °C kg/mol), and m is the molality (moles of solute per kg of solvent).
First, we need to find the molality (m) of the solution:
6.8 = 1.22 * m
m = 6.8 / 1.22 ≈ 5.57 mol/kg
Now, we can calculate the moles of PbCl4 added to the ethanol:
5.57 mol/kg * (2700 g / 1000 g/kg) ≈ 15.03 mol of PbCl4
Next, we need to find the molar mass of PbCl4:
Pb: 207.2 g/mol
Cl: 35.45 g/mol
Molar mass of PbCl4 = 207.2 + (4 * 35.45) ≈ 350.6 g/mol
Finally, we can calculate the grams of PbCl4 added to the ethanol:
15.03 mol * 350.6 g/mol ≈ 5272.2 g
Therefore, approximately 5272.2 grams of PbCl4 were added to 2700 grams of ethanol to increase the boiling point by 6.8 degrees.
To know more about ethanol, visit:
https://brainly.com/question/25002448#
#SPJ11
9. Arrange the following ions in terms of increasing atomic radius (arrange then increasing from left [smallest] to right [largest]): Ca2+, K+, Rb+, Sr2+, Na+
The ions arranged in terms of increasing atomic radius from left to right are: Ca²⁺, Sr²⁺, Na⁺, K⁺, Rb⁺.
As we move from left to right across the periodic table, due to the increasing nuclear charge the number of protons in the nucleus increases, pulling the electrons closer to the center and decreasing the atomic radius. However, as you move down a group, the number of electron shells increases, which increases the distance between the nucleus and outermost electrons, increasing the atomic radius.
Cations (positively charged ions) have smaller radii than their corresponding neutral atoms due to the loss of electrons and increased effective nuclear charge. Ca²⁺, Sr²⁺ have a +2 charge and; K⁺, Rb⁺, and Na⁺ have a +1 charge. Higher charge leads to a smaller atomic radius.
Ca²⁺, Sr²⁺ are located in Group 2, while K⁺, Rb⁺, and Na⁺ are located in Group 1 of periodic table. Arrange the ions based on their positions in the periodic table and their charges.
Based on these factors, the correct order of ions in terms of increasing atomic radius is: Ca²⁺ (smallest), Sr²⁺, Na⁺, K⁺, and Rb⁺ (largest).
To learn more about atomic radius visit:
https://brainly.com/question/15255548
#SPJ11
-in your own words explain the steps involved to write the name (Sodium Chloride) of a chemical formula let’s include at least three steps and use your notes)?
-In your own words explain the steps involved to write the chemical formula (NaCl) from the name (must
include at least 3 steps and use your notes).
To write the name "Sodium Chloride" from a chemical formula, follow these steps:
1. Identify the elements present in the formula: In this case, the formula is "NaCl," which contains the elements Sodium (Na) and Chlorine (Cl).
2. Write the name of the metal (cation) first: In this case, the metal is Sodium (Na). So, the first part of the name is "Sodium."
3. Write the name of the non-metal (anion) with the suffix "-ide": The non-metal is Chlorine (Cl), so the name changes to "Chloride."
4. Combine the names of the metal and non-metal: The final name is "Sodium Chloride."
To write the chemical formula "NaCl" from the name "Sodium Chloride," follow these steps:
1. Identify the elements from the name: In this case, the name is "Sodium Chloride," which contains the elements Sodium (Na) and Chlorine (Cl).
2. Determine the charges of the elements: Sodium has a +1 charge as a cation, and Chlorine has a -1 charge as an anion.
3. Balance the charges to form a neutral compound: Since the charges are +1 and -1, they balance out, and you don't need to add any subscripts.
4. Write the chemical formula using the element symbols: Combine the symbols to form the formula "NaCl."
To know more about Sodium Chloride :
https://brainly.com/question/1559859
#SPJ11
Calculate the ph of a buffer that is 0. 225 m hc2h3o2 and 0. 162 m kc2h3o2. The ka for hc2h3o2 is 1. 8 × 10-5.
The pH of the buffer is 4.60.
To calculate the pH of a buffer, we can use the Henderson-Hasselbalch equation:
[tex]pH = pKa + log([A-]/[HA])[/tex]
where pKa is the dissociation constant of the weak acid, [tex][A-][/tex] is the concentration of the conjugate base, and [tex][HA][/tex] is the concentration of the weak acid.
In this case, the weak acid is acetic acid[tex](HC2H3O2)[/tex], the conjugate base is acetate [tex](C2H3O2-)[/tex], and the dissociation constant (Ka) is [tex]1.8 × 10^-5[/tex].
First, we need to calculate the ratio of [tex][A-]/[HA][/tex]:
[tex][A-]/[HA] = (0.162 M)/(0.225 M) = 0.72[/tex]
Next, we can substitute the values into the Henderson-Hasselbalch equation:
[tex]pH = pKa + log([A-]/[HA])\\pH = -log(1.8 × 10^-5) + log(0.72)[/tex]
pH = 4.74 + (-0.14)
pH = 4.60
Therefore, the pH of the buffer is 4.60.
To know more about pH refer to-
https://brainly.com/question/491373
#SPJ11