When it rains, dust particles and oil residues float on the water and this reduces the traction of tires.
What is traction?This concept refers to a force between the tires and road that causes the movement of the wheels or vehicle is slower.
What happens with traction when it rains?It is well-known more accidents occur when it rains, which is caused by cars slidding on the road. This is because when it rains traction or the grip of the wheel drastically reduces.
Learn more about traction in: https://brainly.com/question/14525337
Help please!!
Daryl uses a microphone connected to an oscilloscope to study sound waves. He finds that higher pitched sounds have higher frequencies and shorter wavelengths while lower pitched sounds have lower frequencies and longer wavelengths. Daryl concludes that the relationship between the frequency and the wavelength of sound waves in air is the result of causation and not correlation. In two to three sentences, describe whether Daryl's conclusion is correct and explain why or why not.
In my opinion, the relationship between the frequency and the wavelength of sound waves in air is the result of correlation.
Relationship between frequency and wavelengthFrequency and wavelength are inversely proportional to each other which means if the frequency increases the wavelength decreases and when the frequency decreases, the wavelength increases.
So we can conclude that the relationship between the frequency and the wavelength of sound waves in air is the result of correlation.
Learn more about sound here: https://brainly.com/question/1199084
Daryl's conclusion about the relationship between frequency and wavelength is accurate because this is the result of causation.
What is the difference between causation and correlation?Causation implies one factor is the cause of another. For example, plants' need for the sun causes them to grow towards the sun.
On the other hand, correlation occurs if two factors are related and therefore the increase in one factor affects the other. For example, the amount of daylight affects plants' photosynthesis rate.
Are frequency and wavelenght an example of causation or correlation?These two factors are an example of causation because a higher frequency in waaves leads to shorter wavelenghts and vice-versa.
Learn more about causation in: https://brainly.com/question/10971583
he electric motor of a model train accelerates the train from rest to 0.720 m/s in 29.0 ms. The total mass of the train is 840 g. Find the average power delivered to the train during its acceleration. W
Answer:
7.481W
Explanation:
power= work done÷time
power= force × uniform velocity
a= ∆v/t
29.0ms=
[tex]29 \times {10}^{ - 3 } s [/tex]
=(0.72-0)÷29×10^-3
a=24.83m/s^2
Newton's second law
f=ma
=(0.84×24.83)
=20.86N
w=FD
v^2=u^2+2as
0.5184=0+49.66s
s=0.0104m
20.86×0.0104
=0.216944J
0.216944÷t
P=7.481W
Which two statements about kinetic energy are true
a. It provides heat because heat is also related to kinetic energy.
b. It is found only in living things.
c. Its amount depends on the moving object's speed.
4. Which TWO images below show kinetic energy?
PLEASE HELP!!!
Answer:
A, C
Explanation:
It can be found in objects like a swing. It creates kinetic energy when it is coming back or going away, while moving.
When the north pole is tilted toward the sun, which area has the fewest hours of daylight?.
Answer:
The earth revolves around the sun in a plane called the ecliptic.
The poles of the earth are at an angle of about 23.5 deg from the ecliptic.
If the north pole is tilted at 23,5 deg towards a perpendicular to this plane (ecliptic) the south pole will be tilted at 23.5 deg away from this plane and will receive the least amount of sunshine.
This is called the summer solstice in the northern hemisphere. and occurs around June 21.
Which two types of electromagnetic waves have higher frequencies than the waves that make up ultraviolet light?
Answer:
the answer is equal to the wave make up ultraviolet light.
What is wave speed ? A. the distance a wave travels in a given amount of time B. the height of a wave C. the same no matter what the medium D. the distance between two similar points on a wave
Answer:
The answer is A
Explanation:
The distance that a wave length travels
Answer:
The correct Answer is A. The distance a wave travels in a given amount of time.
Hope this helps you!!!
Please Mark me AS BRAINLEAST!!!
Who gathered the data that showed planets traveling in elliptical paths around the sun? who discovered elliptical orbits? who explained them?.
Answer:
1. Who gathered the data that showed planets traveling in elliptical paths around the sun?
2. Who discovered elliptical orbits?
3. Who explained them?
Explanation:
1. Tycho Brahe was the one that gathered data.
2. Johannes Kepler discovered it using Tycho Brace’s Data.
3. I believe it was Johannes Kepler because he created 3 laws of it.
I apologize if it is incorrect-
I hope it helps! Have a great day!
Anygays-
hich of these actions would increase heat transfer between two objects?
establishing their thermal equilibrium
increasing the area of their contact
using objects with similar specific heats
reducing the time of their contact
Answer:
increasing the area of their contact
Explanation:
If the force that propels the cannonball forward is 500 N, how much force will move the cannon
backward? Explain.
Answer:
500N
Explanation:
This is due to Newton's third law of motion. For every action, there is an equal and opposite reaction. This encapsulates the conservation of momentum into a single idea.
What is one way that light waves differ from sound waves?
Well light waves are rays of energy and sound waves are vibrations that tun into sound from our ears.
Hope it helps!
What is the angle of incidence if the total angle between the incidence ray and reflected ray is 70⁰
Answer:
35°
Explanation:
By laws of reflection,
Angle of incidence = Angle of reflection
Angle between incident ray and reflected ray = 70°
Angle of incidence + Angle of reflection = 70°
Since,
Angle of incidence = Angle of reflection
Angle of incidence + Angle of incidence = 70°
2 Angle of incidence = 70°
Divide 2 on both sides,
Angle of incidence = 70° / 2
Angle of incidence = 35°
What planet is named for the roman god of commerce, travel, and thievery?.
Answer:
The answer would be Mercury.
Explanation:
Due to its fast travel across the sky, the planet has been given this name. Mercury was named for the fast-moving messenger god of Rome. The planets received their names from the ancient Greeks because they believed that the moving stars in their night sky were their gods going about their activity, so... the planets were named after Roman gods.
Hope this helps! :D
What direction would the north pole of a bar magnet point if you were to hang the bar magnet from a thin string?.
atmospheric pressure is measured in all of the following units except ……… ? A. torr B. pascal C. bar D. newton?
Answer:
C. Bar
Explanation:
An ideal gas is taken through a cyclic thermodynamic process through four steps. The amounts of heat given to the system in these steps are Q{1} = 1000J, Q{2} = - 800J, Q{3} = 450J , Q{4} = - 200 J respectively. The efficiency of cycle is nearly
Need full Explanation ! Answer is already marked in attachment just need the explanation or the way to reach the answer
We are given to find efficiency of the cycle.
We Know
Efficiency is denoted by the symbol "η"
[tex] \text{η\%} = \frac{ \text{Output Work}}{ \text{Heat Supplied } } \times 100[/tex]
As it is a cyclic process, So,
[tex] \triangle \text{U} = 0 \\ \implies \triangle \text{ Q} = \triangle \text{W} + \triangle \text {U} \\ \implies\triangle \text{ Q} = \triangle \text{W} + 0 \\ \implies \triangle \text{Q} = \triangle \text{W}[/tex]
[tex] \text{Let us first calculate} \: \triangle \text{Q}[/tex]
[tex]\triangle \text{Q} = \text{Q}_1 + \text{Q}_2 + \text{Q}_3 + \text{Q}_4[/tex]
[tex]\triangle \text{Q} = 1000 + ( - 800) + 450 + (- 200) \\ \\ \implies\triangle \text{Q} = 1000 - 800 + 450 - 200 \\ \\ \implies \triangle \text{Q} = 450 \text{J}[/tex]
[tex]\therefore \text{ Net Output Work i.e., ∆W = 450 J}[/tex]
Now, We need to find the Heat Input.
We know, Heat Input is always the sum of all positive heats
[tex] \because {∆Q_{in}} = \text{∆Q}_1 + \text{∆Q}_3 \\ \\ 1000 + 450 = 1450 \text{J}[/tex]
Now We Have To Find The η%
[tex] \text{η\%} = \frac{ \text{Output Work}}{ \text{Heat Supplied } } \times 100[/tex]
[tex] \text{η\%} = \frac{ \text{450}}{ \text{1450 } } \times 100 \\ \\ \implies \text{η\%} = \frac{ \text{450}}{ \text{145} \cancel{0 } } \times 10 \cancel0 \\ \\ \implies\text{η\%} = \frac{ \text{450}}{ \text{145 } } \times 10 \\ \\ \implies{ \text{η\%}} = \frac { \cancel{450}}{ \cancel{145}} \times 10 \: \: \: \: \fbox{cancelling by 5} \\ \\ \implies{ \text{η\%}} = \frac{90}{29} \times 10 \\ \\ \implies{ \text{η\%}} = 31.0344\% \\ \\ \implies{ \text{η\%}} = \red{31\%}[/tex]
Option A= 31% is the correct answer
Hope this helps!!Whats a main difference between Earth and Jupiter?
Answer:
Jupiter has a diameter of about 88,695 miles (142,800 kilometers) which is more than 11 times the diameter of Earth
please mark me as the brainliest. ;)
A 20 kg satellite has a circular orbit with a period of 2.7 h and a radius of 8.5 106 m around a planet of unknown mass. If the magnitude of the gravitational acceleration on the surface of the planet is 8.4 m/s2, what is the radius of the planet
Answer:
the radius of the planet is 10.10
The voyager 1 spacecraft is currently 20.7 billion km from earth and heading out of our solar system. how long does it take radio messages from voyager 1 to reach us
Answer:
20.7 billion = 20.7E9 converting to units of 10
20.7E9 km = 20.7E12 m
t = S /v = 20.7E12 m / 3.0E8 m/s = 6.9E4 s = 69000 s
69000 s = 1150 min = 19.2 hrs
How does a mutation in a gene affect a protein?
Answer:
a variant can cause a protein to malfunction or to not be produced at all.
The upward force acting on the wing of an airplane ir flight is called?
Answer:
Lift is the upward force on the wing acting perpendicular to the relative wind and perpendicular to the aircraft's lateral axis. Lift is required to counteract the aircraft's weight.
Explanation:
Answer: The upward force acting on the wing of an airplane in flight is called Lift
The energy diagram shows the changes in energy during a chemical reaction.
Which statement best describes the total energy change of the system?
Potential energy
Reaction progress
A. The products have higher potential energy, and energy is released.
OB. The reactants have higher potential energy, and energy is
absorbed.
C. The products have higher potential energy, and energy is
absorbed
D. The reactants have higher potential energy, and energy is released.
Answer: The Energy Change
Explanation: change for a chemical reaction can either be exothermic if it gives off heat or endothermic if it requires heat to proceed. in a chemical reaction is due to the difference in the amounts of stored chemical energy between the products and the reactants. This stored chemical energy, or heat content, of the system is known as its enthalpy. energy changes that occur during a chemical reaction can be shown in a diagram called a potential energy diagram, or sometimes called a reaction progress curve. A potential energy diagram shows the change in potential energy of a system as reactants are converted into products.
1 point
What is the x component of a vector that is defined as
852m at 302°?
The x component of a vector that is defined as 852 cos 302°. Both the direction and the magnitude are required to define.
What is vector?Vectors seem to be a physical quantity with both magnitude and direction. While the scaler is the only quantity which is defined by the magnitude.
For example, distance is the scaler and the displacement is the vector quantity. Vector is shown by an arrow on the quantity.
A vector's scalar x-component is equal to the product of its magnitude and the cosine of its direction angle.
Hence, the x component of a vector that is defined as 852 cos 302°.
To learn more about the vector, refer to the link;
https://brainly.com/question/13322477
#SPJ1
. Suppose an electron is chasing a proton up this page when suddenly a magnetic field pointing into the page is applied. What would happen to each of the particles
The proton and electron experience forces to the left and right of the page, the particles would separate to the left and right respectively after the magnetic field is applied.
To know what would happen to each particle when a magnetic field pointing in the direction of the page is applied, we need to know the direction of the force acting on the particles due to this magnetic field according to fleming's left hand rule
What is Fleming's left hand rule?
This states that when the thumb, the middle-finger and fore-finger of the left-hand are held at right angles to each other, the magnetic field points in the direction of the fore-finger, the current (or direction of charge) points in the direction of the middle finger and the force on the conductor or charge points in the direction of the thumb.
What is the direction of force on the proton?
Since the direction of the proton is up the page and the direction of the magnetic field is into the page, the direction of the force according to fleming's left hand rule is to the left of the page.
What is the direction of force on the electron?Since the direction of the electron is up the page (it is in the direction of the conventional current or positive charge in the other direction) and the direction of the magnetic field is into the page, the direction of the force according to fleming's left hand rule is to the right of the page.
Since both the proton and electron experience forces to the left and right of the page, the particles would separate to the left and right respectively after the magnetic field is applied.
Learn more about magnetic field here:
https://brainly.com/question/26051825
A certain lever system is only 30% efficient. The following changes are considered:
change 1: Use a stiffer lever to reduce energy lost bending the lever.
change 2: Make a longer lever that will require less force.
Which change would make the lever more efficient?
Change 1 would make the lever more efficient because less energy would be lost.
Change 2 would make the lever more efficient because this would make it easier to lift.
Change 1 would make the lever more efficient because this would make it easier to lift.
Change 2 would make the lever more efficient because less energy would be lost.
Answer: Change 2 would make the lever more efficient because this would make it easier to lift.
Explanation:
The considered change is: Make a longer lever that will require less force because it would make the lever more efficient because this would make it easier to lift.
What is lever?A beam is pivoted at a fixed fulcrum, to form a simple machine known as a lever. A body that can rotate about a point on itself is called a lever.
The lever is classified into three types based on where the fulcrum, weight, and effort are located. Additionally, leverage is a systemic mechanical advantage.
One of the six simple devices that Renaissance scientists identified. Leverage is the ability to increase an input force into a bigger output force through the use of a lever. The mechanical advantage of the lever is determined by the ratio of output force to input force.
Learn more about lever here:
https://brainly.com/question/18937757
#SPJ2
Huge loops of gas that link different parts of sunspot regions are called.
Answer:
Prominences
Explanation:
Which of the following affects the strength of electric attraction/repulsion more: The magnitude of the charge or the distance between them?
(Standard SPS10 c)
A. The magnitude
B. The distance
C. Neither. They affect the strength the same amount ос
Answer:
Distance between them (r^2 )
Explanation:
F = C q1q2/r^2
The amount of work done to produce a sound determines which property of sound waves?.
What wave property is described as the number of waves produced by a source each second.
Answer:
Frequency
Explanation:
The Frequency of a wave is the number of waves produced by a source each second
Kate wants to know which foil paper keeps bread fresher. She wraps three identical
pieces of bread in different types of Foil paper. She placed the pieces of bread in her
kitchen counter for one week. What scientific term describes the pieces of bread?
A.constant
B. responding variables
C. prediction
D. manipulated variables
A. constant
Answer:
hi
Explanation:
The answer is Responding Variables Hope this helps :D
Why does the force of gravity increase when one object gets closer to another object?
Answer:
because the gravity gets stronger as the 2 objects get closer. so the 2 are basicly merging
Explanation:
Since the gravitational force is directly proportional to the mass of both interacting objects, more massive objects will attract each other with a greater gravitational force. So as the mass of either object increases, the force of gravitational attraction between them also increases.
hope this helps!
FUN FACT: we achaly all have gravity, its just so weak that we cant feel it.