Individuals and households that buy or acquire goods and services for personalconsumption make up the ________.
A) consumer market
B) market offering
C) market mix
D) subculture
E) social class

Copy machine and Mineral deposit are not considered intangible assets amongst the following.

Option A and D are correct.

An asset that is not tangible is an intangible asset. Intangible assets include goodwill, brand recognition, and intellectual property like patents, trademarks, and copyrights. In contrast to tangible assets like land, vehicles, equipment, and inventory, intangible assets are not tangible.

An immaterial resource is a recognizable non-financial resource without actual substance. A separable asset or one that is derived from contractual or other legal rights makes it identifiable. Assets that are separate can be sold, transferred, licensed, and so on.

which of the following asset(s) are not considered intangible assets? (check all that apply.) multiple select question.

A.  mineral deposit

B. trademark

C.  goodwill

D. copy machine

E.  copyright

Learn more about intangible asset:

brainly.com/question/29704120

#SPJ1

Debt guarantees, potential legal claims and payable warranties represent reasonably possible contingent liabilities.

Learn more contingent liabilities: https://brainly.com/question/17963028

#SPJ11

Answer:

debt guarantees

potential legal claims

To calculate the amount that a company must deposit today to fund a pension liability of $380,000,000 to be paid in 23 years, at an annual interest rate of 3.4%, use the present value of an annuity formula:

Present Value of an Annuity = Payment × (1 - (1 + i)-n)/i

Where:

For this problem, we are given a pension liability of $380,000,000 to be paid in 23 years at an annual interest rate of 3.4%. Therefore, we can calculate the present value of the annuity by plugging in the given values to the formula above:

Present Value of an Annuity = $380,000,000 × (1 - (1 + 0.034)-23) / 0.034 = $158,231,157.84

Therefore, the company must deposit $158,231,157.84 today to fund the pension liability of $380,000,000 that it must pay in 23 years, at an annual interest rate of 3.4%.

To know more about pension liability refer here:

https://brainly.com/question/24077611#

#SPJ11

There are two mines, mine 1 and mine 2, whose costs per hour to operate are decreased by $10 and increased by $20, respectively. We need to find out if point (1,3) remains optimal or not and what is the minimum cost that could be achieved by operating any of the two mines.

Suppose that the cost per hour to operate mine 1 is C1 and the cost per hour to operate mine 2 is C2. Now, as per question, the cost per hour to operate mine 1 decreased by $10. Therefore, the new cost per hour to operate mine 1 is (C1 - 10). Similarly, the cost per hour to operate mine 2 is increased by $20. Therefore, the new cost per hour to operate mine 2 is (C2 + 20).

To find out the optimal point (1,3), we need to consider the total cost function as: TC = C1 + C2. Now, the new cost function is: TC = (C1 - 10) + (C2 + 20)TC = (C1 + C2) + 10. Now, since the total cost function is a constant function (C1 + C2), the value of the total cost at point (1,3) will remain the same. Hence, point (1,3) will remain optimal.

The minimum cost can be realized at the point (1,3) itself. The cost at this point can be found by putting C1 = 1 and C2 = 3 in the original cost function, i.e., TC = C1 + C2. Therefore, the minimum cost that can be realized is: TC = 1 + 3 = 4.

To know more about cost, refer here

https://brainly.com/question/31041508#

#SPJ11

Nicholas should handle this request in a professional manner by listening to the client's needs and then explaining the process that needs to be followed. He should inform the client that any changes to the contract must be reviewed and approved by the seller and their attorney. Then, he should explain that the new clause must be written in such a way that it is legally binding and that it conforms to the applicable laws.

Finally, Nicholas should make sure that both parties understand the new clause and that all parties are in agreement with the changes.In summary, Nicholas should approach the request for a special clause in a professional manner, listening to the client's needs and then informing them of the process for adding the clause.

He should make sure the clause is legally binding and that all parties understand the changes. Lastly, he should make sure that the clause is reviewed and approved by the seller and their attorney.

To know more about special clause, click here:

https://brainly.com/question/30830887

#SPJ11

This phenomenon is known as "deskilling," which is the process by which a job or task is simplified or automated. As computers became more widespread in the workplace, the demand for skilled workers decreased, and many blue-collar workers were able to transition to white collar jobs.

Deskilling has several benefits for businesses. By automating processes, companies can reduce their labor costs, improve efficiency, and save time. Additionally, many jobs can be handled remotely, allowing businesses to outsource tasks to workers around the world, thus reducing overhead costs. In addition, businesses can take advantage of advances in technology to improve their products and services.

Although deskilling can have many positive effects, it can also have a negative impact on workers. For example, when a job is simplified and automated, it can reduce the need for highly skilled and experienced workers. This can lead to a decrease in wages and job opportunities, as well as a decrease in job satisfaction. Additionally, deskilling can lead to a decrease in job security, as automation and outsourcing become more common.

Deskilling is a phenomenon that has both positive and negative effects. Therefore, businesses must be mindful of the potential consequences of deskilling and take steps to ensure that workers are not adversely affected.

Know more about deskilling here:

https://brainly.com/question/30616309

#SPJ11

Identify the problem you are trying to solve or the information you are trying to convey, and then develop a strategy to address that need is Purposeful.

Strategy refers to a set of actions or plans designed to achieve a specific goal or objective. It involves identifying the problem, determining the desired outcome, and outlining a series of steps or tactics to reach the goal. Strategy is an essential aspect of any organization, business, or individual seeking to achieve success. It requires a deep understanding of the internal and external environment, as well as the resources available. A well-crafted strategy enables individuals or organizations to make informed decisions, allocate resources effectively, and prioritize activities that are most critical to achieving their goals. Strategy is an ongoing process that requires continuous evaluation, adjustment, and refinement to ensure its effectiveness.

the complete question is:

Identify the problem you are trying to solve or the information you are trying to convey, and then develop a strategy to address that need.

i)  Persuasive

ii) Audience oriented

iii) Purposeful

iv) Economical

learn more about resource here

https://brainly.com/question/14529459

#SPJ4

Parties to a real estate transaction can ensure that the facts contained in formal documents are made available to everyone by including making sure all parties are legally represented and that all signatures are valid and verifiable. Create a document repository or database. Ensure that all documents are up-to-date. Provide a notification system or email list

Ths can be done taking followings steps:

By following these steps, parties to a real estate transaction can ensure that the facts contained in formal documents are made available to everyone. This will help to make the process smoother and more efficient, while reducing any confusion or misunderstandings.

To learn more about transaction  here:

https://brainly.com/question/1016861#

#SPJ11

Answer:Personal umbrella insurance is a type of insurance designed to add extra liability coverage over and above another insurance policy, such as auto or homeowners insurance.

Explanation:

Goods that consumers demand more of when incomes increase are called normal goods.

These are goods that people buy more of as their incomes rise, as they have more disposable income to spend. Examples of normal goods include luxury items like jewelry, expensive cars, and high-end clothing, as well as everyday items like food, housing, and transportation.

Normal goods are typically contrasted with inferior goods, which are goods that people buy less of as their incomes rise. Inferior goods are usually lower-quality, lower-priced goods that people turn to when they can't afford better options. Examples of inferior goods include generic brands, fast food, and low-end clothing.

To learn more about demand visit;

https://brainly.com/question/30831801

#SPJ4

The adjustment needed to record inventory at the correct amount is to ensure that the inventory is being carried at the lower of cost or market. This means that the inventory should be valued at whichever is the lower of the two values.

This is done on an aggregate basis, which means that the value of the entire inventory is compared to the cost of the entire inventory. If the market value is lower than the cost value, then the inventory is adjusted to the market value.

This helps to ensure that the company does not overvalue its inventories and that it does not report higher profits than what it actually made. The lower of cost or market method is a common accounting practice and helps to ensure accuracy in the reporting of the company's inventory and profits.

Know  more about inventory here

https://brainly.com/question/15118949#
#SPJ11

CVP analysis is based on some assumptions that may be violated in practice, but the tool is still generally useful.  to identify the connections between expenses, sales volume, and profits.

the cost-volume-profit (CVP) analysis. It enables managers to decide on pricing, sales, and cost control with knowledge. The CVP analysis makes the assumption that a company's cost behaviour can be split into fixed and variable costs and that overall revenues and costs can be broadly represented by linear functions. This makes it possible to determine the break-even point, or the point at which total revenues equal total costs, as well as the contribution margin, or the amount of income that may be used to pay fixed costs and boost profits. CVP analysis is a crucial tool for financial planning and strategic decision-making.

Learn more about CVP analysis here:

https://brainly.com/question/29564340

#SPJ4

To reward group performance, gains haring incentive plans are used. Gain sharing is a type of incentive plan that rewards workers for improving efficiency and reducing costs in a business. This type of incentive plan encourages team effort by providing employees with a share of the cost savings they generate.

Answer and Explanation:Gain sharing is a type of incentive plan that rewards workers for improving efficiency and reducing costs in a business. This type of incentive plan encourages team effort by providing employees with a share of the cost savings they generate. Gains haring encourages teamwork because it provides employees with a sense of ownership over their work and motivates them to work together to find ways to reduce costs and improve efficiency.Gain sharing plans often include incentives for team members to collaborate and share ideas. For example, team members may be rewarded for coming up with new ideas for reducing costs or improving efficiency, or for finding ways to work together more effectively.Gain sharing is a popular incentive plan for businesses because it provides employees with a direct financial incentive to improve their work. It also encourages teamwork and collaboration, which can lead to a more productive and efficient workplace.

for such more question on incentives

https://brainly.com/question/964887

#SPJ11

A supply chain refers to the network of businesses and processes involved in the creation and delivery of a product, from raw materials to the final product in the hands of the consumer. This is an example of a supply chain in the American clothing industry.

In this case, the supply chain consists of the manufacturer, wholesaler, transportation company, and retailer, all working together to produce and distribute clothing items.
1. Manufacturer: The American clothing company produces the clothes using raw materials, such as fabric, buttons, and zippers. They transform these raw materials into finished garments, which are then packaged and prepared for shipment to wholesalers.
2. Wholesaler: Wholesalers purchase large quantities of clothing items from the manufacturer at a discounted rate. Their role is to store, organize, and distribute the clothes to various retail outlets. Wholesalers act as intermediaries between the manufacturer and the retailer, ensuring that the products are available for purchase by the end consumer.
3. Transportation Company: These companies specialize in moving goods from one location to another. In this supply chain, the transportation company is responsible for delivering the clothing items from the wholesaler to the retail outlets. They ensure that the products reach their destination safely and efficiently, often utilizing various modes of transportation, such as trucks, trains, or planes.
4. Retailer: The retail outlets receive the clothing items from the wholesaler, typically through a transportation company. Retailers then stock their shelves with the clothing products, displaying and marketing them to attract customers. Consumers purchase the clothes from these retail outlets, completing the supply chain process.
The collaboration of these different entities within the supply chain helps to create a seamless flow of goods from the manufacturer to the consumer.

This process is essential for the efficient functioning of the American clothing industry, ensuring that customers can access a variety of high-quality products at retail locations.

For more such questions on American clothing

https://brainly.com/question/334112

#SPJ11

The statement that lists down the factors of competitive advantage is true.

Here are the 11 factors of competitive advantage: Quality, Price, Location, Selection, Service, Speed/turnaround, Convenience, Getting the job done, Brand status, Newness, Customization.

Competitive Advantage is the aspect that helps companies to produce products or services that exceed their competitors' outcomes. Companies work on competitive advantages to enhance their position in the market and attract more customers.

In general, competitive advantage depends on different factors like price, quality, location, etc. All these factors help companies to differentiate themselves from their competitors by offering a different and unique product or service.

To learn more about competitive advantage, refer below:

https://brainly.com/question/23556740

#SPJ11

Angelic Ceramics is now at the review stage of the STP process, which entails examining the company's strengths, weaknesses, opportunities, and threats. This stage is critical in determining the company's position .

in the market and its ability to compete effectively. By examining its internal and external environment, Angelic Ceramics may establish its unique selling proposition, analyze its resources and capabilities, and find possible areas for development and improvement. This information may then be utilized to construct a strategic plan that matches with the company's overall aims and objectives. Eventually, the evaluation step is vital for Angelic Ceramics to grasp its competitive edge and make educated decisions to flourish in the market.

learn more about   STP process here:

https://brainly.com/question/28283842

#SPJ4

Opportunity cost is defined as question content area bottom part 1 the highest valued alternative that must be given up to engage in an activity. (D)

Opportunity cost is the cost of an activity measured in terms of the next best alternative that was not chosen. It is a way of evaluating the cost of a decision by looking at the value of the next best option.

For example, if you decide to go to a concert, the opportunity cost is the cost of the ticket plus the value of the best alternative activity you could have chosen instead, such as seeing a movie or staying at home and reading a book.

The opportunity cost of any decision is the most valuable option that you must give up in order to engage in the chosen activity.(D)

To know more about Opportunity cost click on below link:

https://brainly.com/question/13036997#

#SPJ11

Cost variance (CV) is the difference between the actual cost of work completed and the budgeted cost of work scheduled (BCWS) for that work. Therefore, the correct answer is (e) the difference between the estimated cost and how much we have actually spent.

CV is a common metric used in project management to measure project performance and track progress against budget. A positive CV indicates that the project is under budget, while a negative CV indicates that the project is over budget.

It's important to note that CV should not be confused with actual cost (AC), which represents the total actual cost incurred to date. While CV measures the variance between the actual cost and the budgeted cost for a specific task or project, AC represents the total actual cost of all tasks or the entire project.

To learn more about cost variance visit;

https://brainly.com/question/15178583

#SPJ4

The problem with reporting the cash flow from the sale of treasury securities in the cash from operations section of the statement of cash flows is that it is not consistent with generally accepted accounting principles (GAAP).

According to GAAP, cash inflows from the sale of investments, including treasury securities, should be reported in the cash flow from investing activities section of the statement of cash flows.

Reporting cash inflows from the sale of treasury securities in the cash from operations section can artificially inflate the cash flow from operations and mislead investors and other financial statement users into thinking that the company's core operations are generating more cash than they actually are. This can create a false impression of the company's financial health and performance.

However, there may be situations where reporting the cash flow from the sale of treasury securities in the cash from operations section would be acceptable. For example, if the sale of treasury securities is a routine and integral part of the company's operations, such as for a financial institution, it may be appropriate to include the cash inflows from those sales in the cash from operations section.

Additionally, if there is no material difference in the total cash flow from operations whether the sale of treasury securities is included or excluded, then including it may not be misleading. Nonetheless, it is important for companies to follow GAAP guidelines when preparing their financial statements to ensure consistency and comparability of financial information.

Learn more about company's financial health at: https://brainly.com/question/25652952

#SPJ11

If you were to purchase Builtrite preferred stock, your expected return would be 6.91%.

To calculate your expected return, you need to take into account both the dividend yield and the capital gains yield.

In this case, the annual dividend payout is 4.5% of the par value of 60, which is $2.70 per share. Dividing this by the current stock price of 68 gives us a dividend yield of 3.97%.

The capital gains yield, on the other hand, is the change in the stock price over a given period of time, expressed as a percentage. If you were to purchase the stock at 68 and it were to appreciate to, say, 70 over the course of a year, the capital gains yield would be (70-68)/68 = 2.94%.

To calculate your expected return, you simply add the dividend yield and the capital gains yield together. In this case, your expected return would be 3.97% + 2.94% = 6.91%.

To know more about expected return here

https://brainly.com/question/17152687

#SPJ4

The premiums for yearly renewable term insurance "increase at an increasing rate" as the insured gets older. Thus, Option A is correct.

As an insured individual gets older, the likelihood of them passing away increases, which means the insurance company has a higher risk of having to pay out a death benefit. To compensate for this increased risk, the insurance company will charge higher premiums for yearly renewable term insurance as the insured gets older.

Additionally, the rate of increase in premiums tends to accelerate as the insured gets older, meaning that the cost of insurance becomes increasingly expensive over time. It's important to note that the premiums for yearly renewable term insurance are recalculated annually based on the insured's age, so the cost of insurance will increase each year as the insured ages.

Learn more about insurance https://brainly.com/question/28873446

#SPJ11

The marginal revenue product (MRP) of an additional worker is the additional revenue generated by the additional output produced by that worker.

In this case, the additional output of labor is 3 units, and the price per unit is $12, resulting in an MRP of $36. This suggests that the firm should hire the worker if the wage rate is less than $36.

The MRP of an additional worker is a useful tool for understanding the value that worker provides to the firm, and can be used to make decisions about how best to allocate labor resources. It allows firms to identify how much additional revenue is generated for each additional worker, and can be used to compare the value of different input resources.

By understanding the MRP of an additional worker, firms can make more informed decisions about how to allocate their labor resources to maximize profits.

Know more about marginal revenue product here

https://brainly.com/question/14039562#

#SPJ11

option B a requirement of -resource sequencing rule is that each job must be processed first on the first resource and then on the second.

the two useful resource sequencing rule requires that the jobs need to be processed thru every middle of labor inside the identical sequencea Johnson's algorithm is used for sequencing of 'n' jobs via  machines. The cause is to minimise idle time on machines and decrease the entire time taken for completing all of the jobs.Johnson's Rule is: From the list of unscheduled jobs, choose the only with the shortest processing time in both work center. If the shortest time is at the first work center, do processing, do the time the  job first in the time table otherwise do the task closing in the time table.

To understand greater approximately Johnson rule click here
brainly.com/question/6484513
#SPJ4

The main limitation of activity-based costing (ABC) is that it can be expensive to implement.

ABC requires a detailed analysis of costs and activities, which can be costly to set up and maintain. Additionally, ABC may not accurately capture certain costs or cause management to make poorer decisions by focusing too much on activities rather than overall cost efficiency.

ABC is a method of costing in which costs are assigned to activities and activities are used to assign costs to products or services. It requires a detailed analysis of costs and activities, which can be costly to set up and maintain.

Additionally, ABC may not accurately capture certain costs or cause management to make poorer decisions by focusing too much on activities rather than overall cost efficiency. ABC can also lead to less control over overhead costs, since costs are assigned based on the activities performed.

Lastly, ABC may require the collection and analysis of a significant amount of data, which can further increase implementation costs.

To know more about activity-based costing click on below link:

https://brainly.com/question/15862944#

#SPJ11

The amount you will owe in federal income taxes for your ownership in IBM for 2013 is $25.95.

In the given case, you own 100 shares of IBM common stock priced at $118 per share. In 2013 IBM paid qualified dividends totaling $1.73 per share. You are in the 15% federal income tax bracket and the 5% capital gains tax bracket. The amount of federal income taxes for the ownership in IBM for 2013 is as follows:

First, we need to calculate the dividend income:

Dividend income = Dividend per share * Number of shares owned= $1.73 * 100= $173

The tax rate for the dividend income is 15%.

Hence, the amount of federal income tax for dividend income= 0.15 * $173= $25.95

Next, we need to calculate the capital gain tax.

Capital gain = Selling price - Purchase price = $118 - $118= $0

The tax rate for the capital gain is 5%.

Hence, the amount of federal income tax for capital gain= 0.05 * $0= $0

Total federal income tax= $25.95 + $0= $25.95

Therefore, the amount of federal income taxes for the ownership in IBM for 2013 is $25.95.

Learn more about Income taxes:

https://brainly.com/question/30157668

#SPJ11

The minimum cost that could be realized if the low-grade ore requirement was raised to 35 tons would remain the same or be slightly higher depends on several factors, including the current cost of ore and the total cost of production  and the optimal solution might change.  Raising the requirement would likely increase the total cost of production, as more ore would need to be mined.

The optimal solution might change depending on the other production costs, such as labor, transportation, and equipment. If the cost of ore is low enough that it does not significantly add to the overall production cost, then the optimal solution may remain the same. If, however, the cost of ore is high enough that it does add significantly to the overall cost, then the optimal solution might change to make use of ore from other sources or with a higher grade.

In conclusion, the minimum cost that could be realized if the low-grade ore requirement was raised to 35 tons depends on the current cost of ore and other production costs. The optimal solution may remain the same or may change depending on the relative costs of the various production components.

To know more about optimal solution, click here:

brainly.com/question/15577600

#SPJ11

The last stage of formulating a strategy is this. In reality, the optimum course of action is determined after taking organizational goals, organizational strengths, potential, and constraints into account.

For a corporation to have more control over its supply chain, vertical integration necessitates direct ownership of suppliers, distributors, or retail spaces. The benefits may include increased productivity, lower costs, and more control over the production or distribution process.

The Quantitative Strategic Planning Matrix is the only technique used in Stage 3. (QSPM). A QSPM employs Stage 1 input data to objectively assess workable alternative solutions found in Stage 2.

To know more about organizational goals visit :-

https://brainly.com/question/28332875

#SPJ1

The given statement Safety stock tends to be used in MRP systems where there is considerable variability of lead times is a true statement because MRP systems aim to reduce inventory costs while ensuring that the right amount of stock is available to meet customer demand.

Safety stock is the amount of inventory kept on hand to protect against uncertainty in demand, supply chain availability, and production capacity. In MRP systems, safety stock is often used to protect against variability in lead times, which refers to the time between ordering materials or goods and their arrival in the warehouse or production line.

MRP stands for Material Requirements Planning, which is a computer-based system that uses information from various sources, including sales forecasts, customer orders, and production schedules, to plan the materials and components needed for manufacturing. Safety stock is an important part of this equation, as it helps to prevent stockouts and disruptions in the supply chain that can impact customer satisfaction and profitability.

Learn more about safety stock https://brainly.com/question/14054595

#SPJ11

One of the disadvantages of a product layout is that it has low flexibility. The answer is OPTION C

The inability of the product layout to guarantee the full utilization of all machinery is one of its drawbacks. Huge sums of money must be invested in the product layout, and there must be plenty of room for the machinery. The product arrangement will experience a lot of disruptions, such as repairs and power outages.

High expenses associated with in-process inventory can be a drawback of a product layout. With a product structure, there is little in-process inventory. 25. In cellular manufacturing, tools and machinery are categorized according to type. (e.g., all grinders are grouped into a cell). The answer is OPTION C

To learn more about product, click here.

https://brainly.com/question/22852400

#SPJ4

Stellar Corporation's cost of goods manufactured for the year is $348,700.

The current information for the Stellar Corporation is as follows:

Beginning work in process inventory = $35,900

Ending work in process inventory = $37,300

Direct materials used = $165,000

Direct labor used = $103,000

Total factory overhead = $81,100

The cost of goods manufactured for the year is calculated as follows:

Cost of goods manufactured = Beginning work in process inventory + Total manufacturing costs - Ending work in process inventory

Direct materials, direct labor, and factory overhead are the three elements of total manufacturing costs. Therefore, using the above formula, we can calculate the cost of goods manufactured for Stellar Corporation for the year as shown below:

Cost of goods manufactured = $35,900 + ($165,000 + $103,000 + $81,100) - $37,300

Cost of goods manufactured = $35,900 + $349,100 - $37,300

Cost of goods manufactured = $348,700

Hence, the cost of goods manufactured for the year is $348,700.

Learn more about Goods manufactured:

https://brainly.com/question/30525487

#SPJ11