Infant Tylenol contains 0.16 g of acetaminophen (C8H9NO2) in every 5 mL of medicine. What is the Molarity of Tylenol?

Question 6 options:

32 M


0.21 M


0.0002 M


0.32 M

The general trend in densities for periods 2 and 3 in the periodic table is an increase in density from left to right across the period.

This is due to the increase in atomic number and nuclear charge as one moves across the period. As the atomic number and nuclear charge increase, the attractive forces between the positively charged nucleus and the negatively charged electrons increase, causing the electrons to be more closely held and the atoms to be smaller in size. This results in an increase in the density of the elements in the period. The trend is not always followed consistently, and there are some exceptions, particularly in transition elements. For example, chromium and copper, which are transition metals, have densities that are lower than their neighboring elements due to their electronic configurations. In general, however, the trend is useful for predicting the properties of elements based on their positions in the periodic table. It is also helpful in identifying unknown elements based on their densities, particularly if they are in the same period as other known elements with similar densities.

To learn more about Densities :

https://brainly.com/question/13332658

#SPJ11

The gas that diffuses the fastest under the same conditions is He. The correct answer is Option D.

Diffusion is the process by which molecules move from high concentrations to low concentrations. The rate at which diffusion occurs is determined by the type of gas or vapor, temperature, and pressure. In a gas, the rate of diffusion is proportional to the mean free path of its molecules, which in turn is proportional to the square root of its absolute temperature.

Helium (He) is a chemical element with atomic number 2 and symbol He. It is a colorless, odorless, tasteless, non-toxic, inert monatomic gas that heads the noble gas group in the periodic table of elements. Its boiling and melting points are the lowest of any substance, and it exists just as a gas other than a very small liquid state in a closed cell. It's the second-most abundant element in the universe, after hydrogen. Helium is also a valuable gas, and its use in cryogenics and deep-sea diving has expanded in recent years.

Learn more about Diffusion here: https://brainly.com/question/94094

#SPJ11

The thermo ionic equation for the reaction is:

3Mg(s) + 2Al₂(SO₄)₃(aq) → 3MgSO₄(aq) + 2Al(s)

From the given information, we can calculate the amount of heat energy released during the displacement reaction of aluminium by magnesium:

Heat energy released = mass of solution × specific heat capacity × temperature change

The mass of the solution can be calculated as follows:

mass of solution = volume of solution × density of solution

= 60 cm³ × 1.04 g/cm³

= 62.4 g

The moles of aluminium sulphate in the solution can be calculated as follows:

moles of Al₂(SO₄)₃ = molarity × volume of solution

= 2.1 mol/L × 0.06 L

= 0.126 mol

Since the reaction is 3Mg + 2Al₂(SO₄)₃ → 3MgSO₄ + 2Al, we know that 2 moles of aluminium are displaced by 3 moles of magnesium. Therefore, the moles of magnesium that reacted can be calculated as follows:

moles of Mg = (0.126 mol Al₂(SO₄)₃ ÷ 2) × (3 ÷ 2) = 0.189 mol

The molar enthalpy change can be calculated as follows:

ΔH = heat energy released ÷ moles of Mg

= (62.4 g × 4.2 J/gK × 7 K) ÷ 0.189 mol

= -583.6 kJ/mol

(note the negative sign indicating an exothermic reaction)

Apart from the temperature change, effervescence may be observed due to the production of hydrogen gas.

The thermo ionic equation for the reaction is:

3Mg(s) + 2Al₂(SO₄)₃(aq) → 3MgSO₄(aq) + 2Al(s)

Learn more about enthalpy here https://brainly.com/question/12356758

#SPJ1

The individual thermodynamic contribution of w(rm)chain that was found to be increase the interaction energy of the MKR681H dimer. if so, The ture for the chain A is ΔGsolv < 0. The option A is correct.

The expression is as :

W (RM)int = W (RM)dimer - W (RM)chain A - W (RM)chain B

If the W (RM)chain A will increases the interaction energy for the MKR681H dimer, the W (RM)int, the W (RM)chain A must be the negative quantity, Like that the -W (RM)chain A term in the above equation becomes the positive value.

If the W (RM)chain A < 0, then the one or the both of the terms H intra and the ΔGsolv must be negative. Therefore, the option A is correct.

To learn more about thermodynamic here

https://brainly.com/question/20114432

#SPJ4

This question is incomplete, the complete question is :

The individual thermodynamic contribution of W (RM)chain A was found to increase the interaction energy of the MKR681H dimer. If so, what must be true for chain A?

A. ΔGsolv < 0

B. ΔGsolv = 0

C. W (RM)chain A > 0

D. Hintra < 0

Explanation:

v iv are the filter religon

Explanation:

To determine the number of hydrogen atoms in the container, we need to know the number of water molecules present in the container.

At standard temperature and pressure (STP), which is defined as a temperature of 273.15 K and a pressure of 1 atmosphere (atm), one mole of any gas occupies a volume of 22.4 liters. Therefore, the number of moles of water vapor present in the container can be calculated as:

n = V/22.4

where V is the volume of the container in liters. Substituting the given value, we get:

n = 2.80/22.4 = 0.125

So, there are 0.125 moles of water vapor in the container.

Now, to determine the number of hydrogen atoms present in the container, we need to know the number of water molecules in the container, since each water molecule contains two hydrogen atoms. The number of water molecules can be calculated as:

N = n * N_A

where N_A is Avogadro's number, which is equal to 6.022 x 10^23 molecules per mole. Substituting the values, we get:

N = 0.125 * 6.022 x 10^23 = 7.528 x 10^22

So, there are 7.528 x 10^22 water molecules in the container, and since each water molecule contains 2 hydrogen atoms, the total number of hydrogen atoms in the container is:

2 * N = 2 * 7.528 x 10^22 = 1.506 x 10^23

Therefore, there are 1.506 x 10^23 hydrogen atoms present in the container.

Hydrogen should show more lines in the visible spectrum compared to lithium if all possible transitions occur.

The number of spectral lines in the visible spectrum of an element depends on the energy levels and electron transitions within that element. In general, the number of lines in an element's spectrum is related to the complexity of its atomic structure.

Lithium (Li) has a simpler atomic structure compared to hydrogen. Hydrogen has more energy levels and a greater number of possible electron transitions, resulting in a more complex spectrum with a larger number of spectral lines. Therefore, assuming all possible transitions occur, the visible spectrum of hydrogen would generally show more lines than the visible spectrum of lithium.

Learn more about visible spectrum, here:

https://brainly.com/question/29796312

#SPJ12

Answer:

The formula for calcium phosphate is Ca3(PO4)2.

(i) The type of bond formed between N and B is a coordinate covalent bond or a dative bond. This is because the lone pair of electrons on the nitrogen atom is donated to the boron atom to form a bond.

(ii) The F-B-F bond angle in this molecule is expected to be approximately 120 degrees.

(iii) This is because the molecule has a trigonal planar geometry, with the boron atom at the center and three fluorine atoms at the corners of an equilateral triangle. The lone pair of electrons on the nitrogen atom is also located in the same plane as the three fluorine atoms, and it occupies one of the corners of the trigonal planar arrangement. Therefore, the F-B-F bond angle is expected to be approximately 120 degrees, which is the ideal bond angle for a trigonal planar geometry.

Certain potassium nitrate solutes precipitate when a saturated potassium nitrate solution is cooled.

90 percent sodium nitrate dissolves in 100 grams of liquid at 30 degrees Celsius. 150g of potassium nitrate (KNO) is added to 100g of water, heated until the solute dissolves, and then cooled to 55 to create a supersaturated solution.

With a temperature drop, sodium nitrate becomes less soluble. As a result, extra potassium nitrate crystallises when a saturation potassium nitrate solution is cooled.

To know more about solutes visit:

https://brainly.com/question/30665317

#SPJ1

The C=C stretching vibration at 1680-1620 cm-1, where the double bond in 2-pentene is changed to a single bond in 1,2-dibromopentane, would not show the product that was in the beginning material.

The C triple C vibrations are therefore noticed at substantially higher frequencies in the range of 2300 to 2050 cm1, whilst a C-C stretching vibration occurs between 1300-800 cm1 and a C=C stretching vibration occurs between 1700 and 1500 cm1.

As C-C bonds are typically nonpolar, they rarely manifest as peaks in the IR spectra. Since they are not extremely polar, C-H bonds do not produce prominent peaks in the IR spectra.

To know more about double bond visit:-

https://brainly.com/question/30575593

#SPJ1

Explanation:

The basicity of a compound depends on its ability to donate a pair of electrons to an acid. The more easily a compound can donate electrons, the stronger the base it is. Based on this, we can order the compounds NH4+, NH, and INH₂ in terms of decreasing basicity as follows:

NH > NH4+ > INH₂

Here's why:

NH is the most basic of the three compounds because it has a lone pair of electrons on the nitrogen atom that is not shared with any other atoms. This makes it a very good electron donor, and therefore a strong base.

NH4+ is the next most basic compound because it is a positively charged ion, meaning it has lost one of its electrons. As a result, it is not as good at donating electrons as NH, but it is still a stronger base than INH₂.

INH₂ is the least basic of the three compounds because it has two electron-withdrawing groups (the Iodine atoms) attached to the nitrogen atom. These groups decrease the electron density around the nitrogen atom, making it less able to donate electrons and therefore a weaker base than NH4+ and NH.

The balanced chemical equation for the reaction between butane and oxygen to form carbon dioxide and water is shown below.2 C4H10(g) + 13 O2(g) → 8 CO2(g) + 10 H2O(g)We need to calculate the theoretical yield of water formed from the reaction of 2.91 g of butane and 13.5 g of oxygen gas.

To do this, we need to determine which of the two reactants is limiting and then use stoichiometry to calculate the amount of water produced. Butane reacts with oxygen in a ratio of 2:13. Therefore, to calculate the amount of oxygen needed to react with 2.91 g of butane, we use the following calculation: moles of butane = mass / molar mass = 2.91 g / 58.12 g/mol = 0.05 mol The moles of oxygen required = 0.05 mol × (13 mol of O2 / 2 mol of butane) = 0.325 mol So, the limiting reactant is oxygen because there is less of it than required. Using the stoichiometric ratio of the balanced chemical equation, we know that 10 mol of water is produced for every 13 mol of oxygen consumed.

Therefore, the number of moles of water produced can be calculated as follows: number of moles of water = 0.325 mol × (10 mol of H2O / 13 mol of O2) = 0.25 mol The mass of water produced can be calculated using its molar mass: mass of water = number of moles × molar mass = 0.25 mol × 18.02 g/mol = 4.505 g The theoretical yield of water formed from the reaction of 2.91 g of butane and 13.5 g of oxygen gas is 4.505 g of water.

Learn more about theoretical yield of water formed in reaction at: brainly.com/question/18566253

SPJ11

Since the student found the volume of Sr(OH)₂ at the end point is 20.00 ml, then the concentration of Sr(OH)₂ is 0.0417 M.

The balanced chemical equation for the reaction between Sr(OH)₂ and H₃PO₄ is given as:

3Sr(OH)₂ + 2H₃PO₄ → Sr₃(PO₄)₂ + 6H₂O

At the end point of the titration, the number of moles of H₃PO₄ reacted with the number of moles of Sr(OH)₂. This is given as:

Moles of H₃PO₄ = (25.00/1000) x 0.10 = 0.0025 moles

Moles of Sr(OH)₂ = 0.0025/3 = 0.00083333 moles

Given the volume of Sr(OH)₂ at the end point as 20.00 mL = 0.02 Liters, the concentration of Sr(OH)₂ is calculated using the formula:

Concentration = Number of moles / Volume= 0.00083333 / 0.02= 0.0417 M

Therefore, the concentration of Sr(OH)₂ is 0.0417 M.

Learn more about titration here: https://brainly.com/question/30592456

#SPJ11

The given options (a) Twig breaking, (b) Egg frying, (c) Ice cube melting and (d) Plate cracking represents physical changes that take place in matter. Therefore, option (b) Egg frying represents an example of a chemical change in matter.

Chemical change in matter means that matter undergoes a chemical reaction and transforms into a new substance. During a chemical change, chemical bonds are broken, atoms rearrange themselves to form new chemical bonds, and new substances are formed. So, when a chemical change takes place, the composition of matter is altered, and it becomes something different.

Examples of chemical changes in matter include: Rusting of iron, Burning of wood, Tarnishing of silver, Digestion of food, Respiration, Combustion of fossil fuels, Photosynthesis, Fermentation, Rotting of food and Electrolysis.

The process of Egg frying: Egg frying represents a chemical change in matter. When the egg is exposed to heat, its protein molecules are broken down, and the long chains of proteins are uncoiled, and they bond with each other to form a solid mass. This is a permanent change because, after frying, the egg cannot return to its original form. Therefore, egg frying represents a chemical change in matter.

To learn more about "chemical change", visit:  https://brainly.com/question/24940937

#SPJ11

Answer:  T is the smallest non-metal other than noble gases.

Explanation:

The theoretical yield of MgO for Trial 1 is 0.51 g and 0.5 g for trial 2

The first step in these kinds of situations is to write out and balance your chemical reaction.

O2 + Mg + MgO

For Trival 1 and 2, we first need to calculate the moles of magnesium. We take the difference between the mass of the crucible with Mg and the mass of the empty crucible,

which is Trial 1: 26.994g - 26.688g = 0.306

Trial 2: 26.985g - 26.681g = 0.304

We then convert these to moles by dividing by the molecular weight of Mg (24.305 g/mol), which

Trial 1  0.306/24.305 = 0.0126

Trial 2 0.304/24.305 = 0.0125

The theoretical yield would be;

Trial 1; 0.0126 (24.305 + 16) = 0.507

Trial 2; 0.0125 (24.305 + 16) = 0.504

To calculate the percent yield,

Percent Yield = (Actual Yield / Theoretical Yield) x 100%

The answer provided above is based on the full question below;

Data                                           Trial 1                   Trial 2

Mass of empty crucible with lid   26.688g             26.681g

Mass of Mg metal, crucible, and lid 26.994g              26.985g

Mass of MgO, crucible, and lid  27.188g                        27.180g

1a. Magnesium is the limiting reactant in this experiment. Calculate the theoretical yield of MgO for each trial

Find more exercises on theoretical yield;

https://brainly.com/question/12704041

#SPJ1

132.2 g of MgSO₄ contains 4.392 moles of oxygen ions.

To determine the number of moles of oxygen atoms in 132.2 g of MgSO₄, we need to first calculate the number of moles of MgSO₄, and then use its chemical formula to determine the number of oxygen atoms present.

The molar mass of MgSO₄ can be calculated by adding the atomic masses of its constituent elements, which are 24.31 g/mol for Mg, 32.06 g/mol for S, and 4x16.00 g/mol for O, respectively. Therefore, the molar mass of MgSO₄ is:

molar mass of MgSO₄ = 24.31 + 32.06 + 4(16.00) = 120.37 g/mol

Next, we can calculate the number of moles of MgSO₄ in 132.2 g as follows:

moles of MgSO₄ = mass of MgSO₄ / molar mass of MgSO₄

moles of MgSO₄ = 132.2 g / 120.37 g/mol

moles of MgSO₄ = 1.098 mol

Finally, we can use the chemical formula of MgSO₄ to determine the number of moles of oxygen atoms present in 132.2 g of MgSO4. The formula of MgSO₄ indicates that there are four oxygen atoms per molecule of MgSO₄. Therefore, the number of moles of oxygen atoms in 132.2 g of MgSO₄ is:

moles of oxygen atoms = moles of MgSO₄ x 4

moles of oxygen atoms = 1.098 mol x 4

moles of oxygen atoms = 4.392 mol

Therefore, there are 4.392 moles of oxygen atoms in 132.2 g of MgSO₄

To learn more about moles  refer to:

brainly.com/question/26416088

#SPJ4

Answer:

Primary succession happens when a new patch of land is created or exposed for the first time.

Explanation:

Answer:

Change in internal energy if 20J of heat is supplied to a system and gas in system has done 50J work during a thermodynamic process , will be. +30J.

Two reasons why the iodination electrophilic aromatic substitution (EAS) reaction can be described as "green" are the Use of a benign solvent and Use of a less hazardous oxidant. Correct answers are option : 2 & 3.

The reaction uses a solvent, such as acetic acid, which is relatively non-toxic, biodegradable, and readily available, making it an environmentally friendly choice compared to more toxic and harmful solvents. Overall, the use of benign solvents and less hazardous oxidants reduces the environmental impact of the reaction and makes it more sustainable, earning it the label of a "green" reaction. Option 2 & 3 are correct.

To know more about  benign solvent , here

brainly.com/question/14747086

#SPJ4

--The complete Question is, Choose two reasons that the iodination EAS reaction can be described as "green." Select one or more:
1. Use of renewable energy

2. Use of a benign solvent

3. Use of a less hazardous oxidant

4. Use of a catalyst ---

A standardized NaOH (sodium hydroxide) solution should be kept in a stoppered bottle with a rubber stopper to prevent it from reacting with atmospheric carbon dioxide.

Carbon dioxide can dissolve in the solution and react with the NaOH to form sodium carbonate, which can change the concentration of the solution. This reaction can also produce heat and gas, which can cause pressure to build up in the bottle and possibly lead to the stopper popping out.

By using a rubber stopper, the solution is protected from atmospheric carbon dioxide and the stopper is able to release any pressure that may build up inside the bottle. Additionally, the use of a stoppered bottle prevents evaporation and contamination of the solution.

To know more about standardized NaOH here

https://brainly.com/question/25269633

#SPJ4

In the 100 ml volumetric flask, 17.3 mL of a 0.2514 M NaOH solution will be needed to fully neutralise the benzoic acid.

The first step in calculating the volume of NaOH required to neutralize the benzoic acid is to determine how many moles of benzoic acid are present in the 100 ml volumetric flask.

We can do this by dividing the mass of benzoic acid by its molar mass:

0.5312 g / 122.12 g/mol = 0.004346 mol benzoic acid

Since benzoic acid is a weak acid, we can use the Henderson-Hasselbalch equation to calculate the pH of its solution:

pH = pKa + log([A-⁻]/[HA])

The pKa of benzoic acid is 4.20. At the equivalence point of the titration, [A-] = [HA], so we can simplify the equation to:

pH = pKa + log(1) = pKa = 4.20

This means that the benzoic acid will be fully ionized at pH 4.20, and the volume of NaOH required to neutralize it can be calculated by using the balanced equation:

C₆H₅COOH + NaOH → NaC₆H₅COO + H₂O

The stoichiometric ratio of benzoic acid to NaOH is 1:1, so the moles of NaOH required to neutralize the benzoic acid is also 0.004346 mol.

To calculate the volume of 0.2514 M NaOH required to provide this number of moles, we can use the following equation:

moles = concentration x volume

0.004346 mol = 0.2514 mol/L x volume

volume = 0.0173 L = 17.3 mL

Therefore, 17.3 mL of 0.2514 M NaOH solution will be required to completely neutralize the benzoic acid in the 100 ml volumetric flask.

To learn more about benzoic acid refer to:

brainly.com/question/24052816

#SPJ4

It is possible to conduct a test to distinguish between potassium chloride and potassium iodide using a silver nitrate solution. Silver nitrate solution and ammonia solution are used in the testing for halide ions.

When bromine-water is introduced to a potassium iodide solution, hydrobromic acid is produced as a byproduct of the oxidation to iodate, which is indicated by a sharp rise in conductivity and a fall in pH.

The Layer's test is conducted using "carbon disulphide" and "dilute hydrochloric acid." This produces an orange layer when bromide ions are present, and a violet layer when iodide ions are present.

To know more about potassium chloride visit:-

https://brainly.com/question/22528097

#SPJ1

In the citric acid cycle to produce catabolic effect and oxidizing acetate into CO₂ and generating energy starting from citrate and going around the circle, cholesterol, nucleotides, heme, pyruvate and glucose.

The glyoxylate cycle's primary role is anabolic, allowing the generation of glucose from fatty acids in plants and bacteria, whereas the citric acid cycle is a significant catabolic route producing a significant amount of energy for cells.

In addition to producing energy by oxidising acetate into CO2, the citric acid cycle also has an IK anabolic function. Many of the intermediates in the citric acid cycle act as building blocks for the production of bigger compounds.

Cholesterol, nucleotides, heme, pyruvate, and glucose are all used as energy sources in the citric acid cycle to provide a catabolic effect and oxidize acetate into CO2.

To know more about Citric cycle, visit,

https://brainly.com/question/14900762

#SPJ4

Answer:

56.4 kJ

Explanation:

First, let's convert the mass of water from grams to moles. We can do this by dividing the mass by the molar mass of water, which is approximately 18 g/mol.

25 g ÷ 18 g/mol ≈ 1.39 mol

So we have 1.39 moles of water that we want to vaporize.

Next, we need to use the molar heat of vaporization to calculate how much energy is required to vaporize one mole of water. The molar heat of vaporization tells us how much energy is needed to vaporize one mole of a substance at a constant temperature and pressure. In this case, the molar heat of vaporization for water is 40.6 kJ/mol.

So, to vaporize 1 mole of water, we need 40.6 kJ of energy.

Finally, we can use this information to calculate how much energy is required to vaporize 1.39 moles of water. We can multiply the energy required to vaporize one mole of water by the number of moles we have:

40.6 kJ/mol × 1.39 mol ≈ 56.4 kJ

Therefore, it would take approximately 56.4 kJ of energy to vaporize 25 g of liquid water at 100°C.

I hope this explanation helps!

The energy stored in NADH molecules is transferred to ATP by oxidative phosphorylation through a series of processes involving the Electron Transport Chain, the creation of a proton gradient, and ATP synthesis via chemiosmosis.

1. Electron Transport Chain (ETC): The first step in oxidative phosphorylation involves the Electron Transport Chain, which is a series of protein complexes located in the inner mitochondrial membrane. NADH molecules transfer their high-energy electrons to the first complex in the ETC, known as Complex I.

2. Transfer of electrons: As electrons move through the ETC, they are transferred from one complex to another (from Complex I to Complex II, Complex II to Complex III, and Complex III to Complex IV). During this transfer, energy is released, which is used to pump hydrogen ions (protons) across the inner mitochondrial membrane from the matrix into the intermembrane space.

3. Proton gradient: The pumping of protons across the inner mitochondrial membrane creates an electrochemical gradient, which is also known as a proton gradient. This gradient represents a form of potential energy.

4. ATP synthase: As protons flow back into the mitochondrial matrix through a protein complex called ATP synthase, the energy from the proton gradient is harnessed to synthesize ATP from ADP (adenosine diphosphate) and inorganic phosphate (Pi). This process is known as chemiosmosis.

5. Final electron acceptor: The electrons reach the end of the ETC and are transferred to the final electron acceptor, which is molecular oxygen ([tex]O_{2}[/tex]). This transfer results in the formation of water ([tex]H_{2}O[/tex]), as oxygen combines with protons from the matrix.

To know more about Oxidative Phosphorylation:

https://brainly.com/question/17463997

#SPJ11

Tommy can expect to produce 6.10 grams of potassium chloride.

To determine the amount of potassium chloride produced, we first need to determine the limiting reagent, which is the reactant that is completely consumed in the reaction.

To do this, we can convert the given masses of potassium phosphate and magnesium chloride into moles using their respective molar masses:

Molar mass of K₃PO₄ = 3 x 39.1 g/mol (K) + 1 x 30.97 g/mol (P) + 4 x 16.00 g/mol (O) = 212.27 g/mol

Molar mass of MgCl₂ = 1 x 24.31 g/mol (Mg) + 2 x 35.45 g/mol (Cl) = 95.21 g/mol

Moles of K₃PO₄ = 5.79 g / 212.27 g/mol = 0.0273 mol

Moles of MgCl₂ = 4.92 g / 95.21 g/mol = 0.0517 mol

Now, we need to determine which reactant is the limiting reagent by comparing the mole ratios of the reactants in the balanced chemical equation:

For every 2 moles of K₃PO₄, we need 3 moles of MgCl₂ to react completely.

The mole ratio of K₃PO₄ to MgCl₂ is therefore 2:3.

Since we have more moles of MgCl₂ than required by the mole ratio, MgCl₂ is in excess and K₃PO₄ is the limiting reagent. This means that all of the K₃PO₄ will be used up in the reaction and there will be some MgCl₂ left over.

Using the mole ratio of the balanced equation, we can now calculate the moles of KCl produced:

For every 2 moles of K₃PO₄, we get 6 moles of KCl.

The mole ratio of K₃PO₄ to KCl is therefore 2:6, or 1:3.

Moles of KCl produced = 0.0273 mol K₃PO₄ x (6 mol KCl / 2 mol K₃PO₄) = 0.0819 mol KCl

Finally, we can convert the moles of KCl produced into grams using the molar mass of KCl:

Molar mass of KCl = 1 x 39.1 g/mol (K) + 1 x 35.45 g/mol (Cl) = 74.55 g/mol

Grams of KCl produced = 0.0819 mol KCl x 74.55 g/mol = 6.10 g KCl

Therefore, Tommy can expect to produce 6.10 grams of potassium chloride.

Learn more about moles here:

https://brainly.com/question/26416088

#SPJ1