To practice lithologic correlation, follow these steps:
1. Gather the required materials: a ruler, a pencil with eraser, and colored pencils (optional).
2. Correlate the three stratigraphic sections by drawing lines with a pencil and a ruler to connect geologic contacts between beds as illustrated in Figure 7.16. Remember, this is not a matching activity, so draw lines at the contacts, not the midpoints of the units.
a. The number of beds that can be correlated across all three sections depends on the specific stratigraphic sections provided, which are not included in the question.
b. To determine the thickness of the thickest stratigraphic section, refer to the provided scale (0 to 70 meters) and measure the entire column of rocks in each section. The highest measurement is the thickest section.
c. To locate the bed of coal in section A, examine where it appears in sections B and C, and draw it accordingly in the blank area of section A.
To calculate the depth required to drill in section A to reach the coal seam, measure the distance from the top of section A to the top of the coal bed, using the provided scale.
d. The type of unconformity present depends on the specific stratigraphic sections provided, which are not included in the question.
e. To determine whether the sequence above the unconformity is transgressive or regressive, observe the change in sediment grain size and the sequence's overall trend (i.e., marine or non-marine).
If the sequence shows a progression from coarser to finer-grained sediments and a marine trend, it is transgressive. If the sequence shows a progression from finer to coarser-grained sediments and a non-marine trend, it is regressive.
To learn more about lithologic, refer below:
https://brainly.com/question/3209838
#SPJ11
Sparta got the land it needed by conquering its neighbors. What happened after Sparta conquered a neighboring land?- Spartans demanded that the conquered people leave the land and let Spartans move in.- Spartans demanded that the conquered people give Sparta much of their food crops.- The conquered people moved to Sparta and sold their goods in the marketplace.- The conquered people traveled by sea to other countries to trade for barley and wheat.
Sparta got the land it needed by conquering its neighbors. Spartans demanded that the conquered people leave the land and let Spartans move in.
Sparta was able to acquire the land it needed for its city-state by conquering its neighboring peoples. As part of the process of subjugation, the conquered people were required to leave their lands, allowing Spartans to move in and occupy them.
This strategy allowed Sparta to build and expand its city-state while controlling the resources of its neighbors, giving it a distinct advantage over other Greek city-states. This approach of military might gave Sparta the resources it needed to sustain its power.
To know more about Sparta , click here.
https://brainly.com/question/31097577
#SPJ4
how can local entertainment be promoted in singapore?
the large ocean that existed ~220 million years ago, forming about 60% of the earth's surface was known as
The large ocean that existed about 220 million years ago, forming about 60% of the earth's surface was known as Panthalassa.
Panthalassa was a superocean that surrounded the supercontinent Pangaea. It was the largest single ocean in the history of the earth, covering nearly two-thirds of the planet's surface.
Panthalassa also extended beyond the present-day Pacific, covering large areas of the Indian, Arctic, and Atlantic oceans, including most of the southern hemisphere.The term Panthalassa means "all seas" in Greek, and the ocean was so named because it covered most of the earth's surface.
Although Panthalassa no longer exists as a single ocean, it can be viewed as a precursor to today's Pacific Ocean, which is still the largest body of water on earth.
The splitting of Pangaea into smaller landmasses and the movement of tectonic plates have changed the earth's surface and reduced the size of the oceans, leading to the creation of new bodies of water, such as the Atlantic and Indian oceans.
To know more about Panthalassa click on below link:
https://brainly.com/question/2793546#
#SPJ11
the main reason why small-magnitude earthquakes (e.g., magnitude less than 4) occur much more frequently than do large-magnitude quakes (e.g., magnitude greater than 6.5) is:
Small-magnitude earthquakes occur much more frequently than large-magnitude quakes because they are generated by the release of stress along smaller faults and fractures in the earth's crust.
These faults and fractures are more numerous and smaller in size compared to the larger faults responsible for generating larger magnitude earthquakes. This means that small-magnitude earthquakes occur more frequently but also have lower amounts of energy released compared to larger magnitude earthquakes. Additionally, the occurrence of large-magnitude earthquakes requires a greater accumulation of stress along larger faults, which takes longer periods of time to build up and release. Therefore, the frequency of earthquakes decreases as the magnitude increases.
To know more about Small-magnitude earthquakes click here:
brainly.com/question/29500066
#SPJ4
Explain what maps or data impy or illustrate about geographic
principles, processes, and outcomes
Maps provide information about the globe in an easy-to-understand, visual style.
They demonstrate the sizes and forms of the many nations, the positions of various characteristics, and the separations between various regions to teach about the world. Maps may depict how items are distributed around the globe, including patterns of habitation.
Topographic maps are scaled-down visual depictions of both natural and man-made features on various portions of the Earth's surface.
They depict the topography of the terrain, the heights above sea level, lakes, streams, and other hydrographic features, as well as highways and other human creations.
Maps covering coastal and marine areas are known as nautical charts, because they contain navigational data.
They include depth curves, soundings, or both; navigational aids like buoys, channel markers, and lights; islands, rocks, wrecks, reefs, and other hazards; and significant features of the coastal areas, such as promontories, church steeples, water towers, and other features useful in determining positions from offshore.
To know more about Maps visit:
https://brainly.com/question/1565784
#SPJ1
distinguish attributes of crustal deformation as being associated with folding or faulting.
Folding and faulting are two types of crustal deformation. Folding is when the rock layers bend and buckle due to stresses applied to the rocks. Faulting is when the rocks fracture and move past each other due to the forces applied.
Fold is one of the most common attributes of crustal deformation. It is the process of layering rocks that become distorted due to compressive stress. When rocks are compressed, they change shape and form wave-like patterns. When these waves reach their limit, they start to fold over each other. Some common types of folds include synclines, anticlines, and domes. The different types of folds and their structures depend on the direction and amount of force applied to the rock.
Faulting is another attribute of crustal deformation that occurs when rocks break and move along the earth's crust. Faulting can be caused by tectonic plates rubbing together, volcanic eruptions, or underground explosions. When the rocks move along the fault, they create a fracture or crack in the earth's surface. These faults can be found in different shapes and sizes depending on the amount of stress applied to them. Some common types of faults include normal, reverse, and strike-slip faults.
Learn more about faulting at https://brainly.com/question/9349830
#SPJ11
who is better Olix or Hazem
Answer: hazem
Explanation: he donates millions and host million giveaways
In what ways Western traders and immigrants give to Oceanic societies and governments?
Select all that apply.
Responses
Missionaries converted Pacific Islanders to Christianity.
They provided native chiefs with guns and weaponry.
Businessmen introduced the concepts of loans and credit.
They brought grain-based agriculture and cuisine to the region.
Businessmen introduced the concepts of loans and credit.
identify the type of waves that cause earthquakes and explain how they differ from sound waves.
Earthquakes are caused by seismic waves, which are a type of wave that moves through the Earth's crust, transferring energy from one point to another.
Seismic waves are different from sound swells in that they move much briskly and have much lesser energy. Seismic swells can travel through solid, liquid, and gas, whereas sound swells need a medium to travel through. Seismic swells also have a much longer wavelength and can travel over large distances.
Seismic swells have the capability to structures to shake and can beget damage to structures and other structures.
To know more about Seismic waves visit:
https://brainly.com/question/9645077
#SPJ4
which city is the capital of a large island nation in the indian ocean
Answer:
Mauritius, Port Louis
Explanation:
mauritius is an island-country in the indian ocean, and it's located very close to africa! it's located off the eastern coast of africa.
the capital of it is port louis
hope this helped :)
can a layer of sediment lie beneath a layer of bedrock?
Yes, a layer of sediment can lie beneath a layer of bedrock. The layers of rock that make up the Earth's crust are called strata, and they are typically stacked on top of one another in a specific order.
WHAT'S BEDROCKBedrock is the layer of rock that lies beneath the soil, and it is typically the oldest and most stable layer of rock.
Sediments are typically deposited on top of the bedrock layer, which can be made up of sand, silt, clay, and other materials. These sediments can accumulate over time, eventually forming a layer of sedimentary rock. If the sedimentary layer becomes buried by additional layers of rock, it may eventually become lithified, or turned into solid rock, through the process of compaction and cementation.
Beneath the sedimentary layer, there may be additional layers of rock, including metamorphic or igneous rocks, depending on the geological history of the region. These layers may have formed through processes such as heat and pressure, volcanic activity, or other geological forces.
Learn more about sediment at
https://brainly.com/question/30558930
#SPJ11
short-term earthquake prediction may utilize which of the following? multiple select question. geomagnetic studies to determine switches in earth's polarity lasers that can record even slight movement along a fault study of foreshocks and stress buildup monitoring activity along an earthquake-prone fault
Short-term earthquake prediction may utilize all of the following techniques:
geomagnetic studies to determine switches in earth's polarity, lasers that can record even slight movement along a fault,study of foreshocks and stress buildup, and monitoring activity along an earthquake-prone fault.Options A, B, C and D are correct answers.
The term "earthquake prediction" refers to the process of estimating when and where an earthquake will occur. Even though many studies have been conducted in this area, the forecasting of earthquakes is still an active area of research. The methods used to predict earthquakes can be divided into three categories: long-term, intermediate-term, and short-term.
Long-term earthquake prediction is based on the study of past earthquakes and the frequency of their occurrence. The goal is to determine when a fault is likely to rupture and produce an earthquake. Intermediate-term earthquake prediction is based on the observation of small earthquakes or microearthquakes, which can provide clues to the timing and location of larger earthquakes. Finally, short-term earthquake prediction is based on the observation of precursory phenomena that occur in the hours or days leading up to an earthquake.Options A, B, C and D are correct answers.
You can learn more about earthquake prediction at
https://brainly.com/question/13964631
#SPJ11
how did the physical models make it difficult to show what happens to the plates and mantle at plate boundaries?
Physical models, such as the sandbox model, were used in the past to simulate plate tectonics and the movement of plates at plate boundaries.
However, these models were limited in their ability to accurately represent the actual processes occurring in the Earth's mantle due to differences in scale and material properties. Additionally, physical models only provided a 2-dimensional representation of a 3-dimensional process. This made it difficult to show the complex interactions and deformation that occur at plate boundaries, such as the creation and destruction of lithosphere, the formation of subduction zones, and the generation of earthquakes and volcanic eruptions. As a result, modern techniques such as computer modeling and seismic imaging have become more widely used to better understand plate tectonics.
To know more about mantle click here:
brainly.com/question/1550670
#SPJ4
Physical models of plate boundaries are limited by their static nature in representing the dynamic processes at play in plate tectonics. This includes difficulty in accurately modelling processes like subduction at convergent boundaries and upwelling of magma at divergent boundaries.
Explanation:The physical models of plate boundaries struggle to accurately depict what occurs because they are limited by their static nature. Our Earth's plates and mantle are continually shifting and interacting in a dynamic fashion and these movements are often very slow but implacable, which is hard to represent with a stationary physical model.
For example, at convergent boundaries, one plate is pushed below the other into the mantle, a process known as subduction. This is difficult to represent on a physical model because subduction occurs over millions of years and involves the movement of solid rock into the semi-fluid mantle, a dynamic process that is difficult to model accurately.
Similarly, at divergent boundaries where plates move apart, new crust is formed by upwelling magma from the mantle, another gradual and dynamic process that is hard to showcase in a static physical model.
Learn more about Plate Boundaries here:https://brainly.com/question/31720127
#SPJ12
What happened to air quality in cities as a result of the Industrial Revolution?
O Global Warming
O It stayed about the same.
O It got worse, and health conditions worsened as a result.
O It improved, and health conditions improved as well.
O It got worse, and health conditions worsened as a result.
What is the destructive process that through both physical disintegration and chemical decomposition change rock that has been exposed at Earth's surface?
The destructive process that changes rock exposed at Earth's surface through physical disintegration and chemical decomposition is called weathering.
Weathering is a natural process that breaks down rock and other geological materials at or near the Earth's surface. There are two types of weathering: physical weathering and chemical weathering.
Physical weathering involves the breakdown of rock into smaller pieces through mechanical processes, such as freezing and thawing, heating and cooling, and the actions of wind, water, and ice. This type of weathering does not change the chemical composition of the rock, only its physical appearance and size.
Chemical weathering involves the breakdown of rock through chemical reactions with substances in the environment, such as water, oxygen, and acids. This type of weathering can alter the chemical composition of the rock, leading to the formation of new minerals or the breakdown of existing minerals.
Overall, weathering is an important process that contributes to the formation and evolution of Earth's surface features, such as mountains, valleys, and river systems. It also plays a crucial role in the formation of soil, which is essential for plant growth and the support of terrestrial ecosystems.
To know more about weathering, refer here:
https://brainly.com/question/14426457#
#SPJ11
name one area of authority over state militia reserved exclusively to the states.
The states have sole jurisdiction over the appointment of officers in state militia. Separate from the federal government, states have the authority to choose and commission officers of their own militia units.
The US Constitution grants the federal government the authority to control the militia, but also expressly vests state authority in the selection of officers. This indicates that, in the absence of central meddling, the states are free to select their own military commanders and organize their militias however they see suitable. This is a reflection of the framers' intention to maintain a balance of power between the federal government and the states and to guarantee that each state's militia would be obedient to it. The appointment of officers in state militias is entirely within the states' purview. a body apart from the federal government.
learn more about states here:
https://brainly.com/question/30187001
#SPJ4
1 ptRain forests receive 70 inches to 30 feet of rainfall eachDayMonthYearDecade
Rain forests receive 70 inches to 30 feet of rainfall each year.
A rain forest is a typically tropical woodland with heavy annual precipitation and extremely tall, continuously layered evergreen trees. All year round, tropical rainforests are warm and lush. Even the difference in temperature between day and night is minimal. Tropical rainforests typically have temperatures between 70 and 85°F (21 and 30°C).
Tropical rainforests have a fairly moist climate with year-round humidity levels of 77% to 88%. Due to the amount of rain and sunshine these regions receive, tropical rainforests can be found close to the equator. The majority of tropical rainforests are located between the Tropics of Cancer and Capricorn.
Learn more about Tropical rainforests at:
brainly.com/question/235998
#SPJ4
all of the following are problems associated with overdrawing groundwater except: group of answer choices land subsidence increased infiltration lowering of the water table aquifer depletion
Overdrawing of groundwater can cause numerous problems such as aquifer depletion, lowered water tables, land subsidence, increased infiltration, and saltwater intrusion into freshwater aquifers. Therefore, the correct response to this question is "aquifer depletion."
Aquifer depletion is a problem that is linked to groundwater overdrawing. It refers to the situation in which the use of water from an aquifer exceeds its natural recharge rate. This results in a decline in the groundwater level and a reduction in the amount of water available in the aquifer. Aquifer depletion is usually caused by human activities such as agriculture, industry, and urban development.
Lowering of the water table, land subsidence, increased infiltration, and saltwater intrusion are other problems associated with overdrawing groundwater. Lowering of the water table occurs when the amount of water withdrawn from an aquifer exceeds the rate at which it is naturally replenished. As a result, the water table drops, and wells run dry.
Land subsidence is a consequence of overextraction, which causes the ground to settle. Increased infiltration happens when there is an excessive amount of water, which results in increased seepage. Finally, saltwater intrusion occurs when overuse of groundwater leads to the contamination of freshwater aquifers by saltwater.
To learn more about aquifer depletion here:
https://brainly.com/question/30480029#
#SPJ11
assuming the earth were flat and not rotating, which latitudes would semi-permanent low pressure systems be found?
Assuming the Earth were flat and not rotating, semi-permanent low-pressure systems would be located at the equator and at 60 degrees latitude in both hemispheres.
At the equator, the low pressure is caused by the convergence of the trade winds from both hemispheres. These trade winds blow from the subtropical high-pressure zones towards the equator, where they converge and rise, creating a low-pressure zone.
At 60-degree latitudes, the low pressure is caused by the mixing of polar air masses with subtropical air masses. The polar air masses are cold and dense, while the subtropical air masses are warm and less dense. When these air masses meet at 60 degrees latitude, the polar air sinks beneath the subtropical air, creating a low-pressure zone.
It is important to note that the Earth is not flat, and the rotation of the Earth plays a critical role in the formation and movement of these semi-permanent pressure systems. The Coriolis effect, which is caused by the Earth's rotation, deflects the flow of air in the atmosphere and creates the prevailing wind patterns and pressure systems that we observe on a rotating Earth.
Learn more about the Coriolis effect:
https://brainly.com/question/1557014
#SPJ11
describe 2 ways in which the environment influences the way people live
Answer: There are various ways and weather elements such as precipitation, sunlight, water etc, biotic factors, and all them sum up altogether and they affect our lives The various environmental factors include weather elements (such as temperature, precipitation, sunlight, etc.), resources (such as water, air, land, etc.) and biotic factors (other organisms, plants, etc.). A sum total of all these factors and how they interact with human beings affect how we live our lives. A region with heavier rainfall means that people will have to build homes and city with adequate drainage. A region with better water availability and more fertile land would be used for agriculture, while a drier region will have a different life style and work preferences. A region with more sunlight will mean people have to use shades and protect the cattle and themselves from heat (by drinking more water). Similarly, people living near oceans tend to eat more fish, while people living in plains (and near fertile regions), eat more vegetables, etc.
other than baton rouge, what other cities served as the capital of louisiana?
The other capital of Louisiana was New Orleans, which served as the capital from 1803-1880.
After the capital was moved to Baton Rouge, other metropolises compactly served as the capital of Louisiana. From 1863- 1865, during the Civil War, Opelousas was the capital. Donaldsonville served as the capital from 1865- 1880, and Shreveport served as the state capital from 1882- 1884.
After 1884, Baton Rouge remained the sanctioned capital of Louisiana. All of these metropolises were chosen for their strategic position and centrality to the state. Each megacity was located near aqueducts for transportation and communication, and each was also far enough down from the seacoast to avoid being targeted by hostile forces.
To know more about Civil War visit:
https://brainly.com/question/11874600
#SPJ4
Volcanic activity created the _____ that is important to the economy of the village of Vestmannaeyjar on the island of Heimaey, near Iceland.fishing portvolcanic peaksmineral oreshot springs
Volcanic activity created the fishing port that is important to the economy of the village of Vestmannaeyjar on the island of Heimaey, near Iceland.
Volcanic activity created the fishing port that is important to the economy of the village of Vestmannaeyjar on the island of Heimaey, near Iceland. Vestmannaeyjar is a volcanic island group located off the coast of southern Iceland. Vestmannaeyjar, often known as the Westman Islands, has become one of Iceland's major tourist destinations because of its distinct landscape and the abundance of natural features it has to offer.
Volcanic activity is known to produce a wide range of mineral resources that can be beneficial to human beings. Volcanic activity contributes to the formation of islands, mountains, lakes, and other natural features that can be exploited for economic purposes. For example, the fishing port in the village of Vestmannaeyjar on the island of Heimaey, near Iceland, was formed due to volcanic activity. As a result, the port has become one of the primary sources of economic activity for the island's inhabitants.
Learn more about Volcanic activity: brainly.com/question/1362358
#SPJ11
list the four mechanisms that cause air to rise and create clouds.
Answer:
The four mechanisms that cause air to rise and create clouds are:
Orographic uplift, Convection .,Convergence and Frontal uplift
Explanation:
The four mechanisms that cause air to rise and create clouds are:
1. Orographic uplift: Air is forced to rise due to a mountain barrier, which may cause clouds to form.
2. Convection: The sun heats the earth's surface, causing air to warm and rise, creating a low-pressure zone, which causes air to rise, and possibly leading to cloud formation.
3. Convergence: Air is forced to rise as a result of two or more air masses colliding, and this rising motion may cause cloud formation.
4. Frontal uplift: As a result of a cold and warm air mass colliding, the warm air rises over the cold air, causing cloud formation.
Therefore, the four mechanisms that cause air to rise and create clouds are orographic uplift, convection, convergence, and frontal uplift.
To know more about cloud formation refer here:https://brainly.com/question/29776325#
#SPJ11
What does this texture indicate about the formation of this rock? A) It formed from an explosive pyroclastic eruption B) The rock solidified at great depth C) The magma formed some crystals before rising closer to the surface and solidifying D) The magma had abundant dissolved gas
This texture indicates that the formation of this rock is most likely option C) The magma formed some crystals before rising closer to the surface and solidifying.
The texture of a rock can provide valuable information about its formation and history. In this case, the texture described suggests that the rock formed from magma that had begun to crystallize before reaching the surface.
When magma cools and solidifies, the rate of cooling can have a significant impact on the texture of the resulting rock. Rapid cooling can prevent the formation of large crystals, while slower cooling allows time for larger crystals to form.
In the case of the described texture, the presence of larger crystals indicates that the magma had started to cool and crystallize before reaching the surface.
Option C) "The magma formed some crystals before rising closer to the surface and solidifying" is the most likely formation process for this rock because it aligns with the observed texture.
As the magma cooled, crystals began to form and grow, resulting in the formation of larger crystals. The magma then rose closer to the surface and eventually solidified, preserving the crystalline structure of the rock.
In contrast, option A) "The magma cooled rapidly on the surface, preventing any crystal formation" would result in a different texture, such as a glassy texture, as there would not have been enough time for crystals to form.
Option B) "The rock was formed by the solidification of sediment" would not produce the observed crystalline texture. Option D) "The rock formed from molten sediments that were subjected to extreme heat and pressure" also would not produce the observed crystalline texture.
In summary, the texture described in the question is indicative of a rock that formed from magma that had started to crystallize before reaching the surface. Therefore, option C) is the most likely formation process for this rock.
To learn more about magma, refer below:
https://brainly.com/question/16940653
#SPJ11
On which three bodies of water does the Tropical North region have coastlines?Gulf of Mexico, Pacific Ocean, Atlantic OceanPacific Ocean, Caribbean Sea, Atlantic OceanBlack Sea, Pacific Ocean, Caribbean SeaGulf of Mexico, Atlantic Ocean, Caribbean Sea
The three bodies of water does the Tropical North region have coastlines Gulf of Mexico, Pacific Ocean, Atlantic Ocean
The bodies of water does the Tropical North region have coastlines?The Tropical North region typically refers to the northernmost part of Australia, which has coastlines along the Gulf of Mexico, the Pacific Ocean, and the Arafura Sea. However, none of the options provided in the question includes these three bodies of water.
If we assume that the question is referring to a different region, then the correct answer would be:
Gulf of Mexico, Pacific Ocean, Atlantic Ocean
Read more on Tropical North
https://brainly.com/question/12461487
#SPJ1
in a shallow, well-mixed estuary such as delaware bay, the inward transport of salt is controlled by .
In a shallow, well-mixed estuary such as Delaware Bay, the inward transport of salt is controlled by Diffusion.
Diffusion refers to the spontaneous movement of molecules from areas of high concentration to areas of low concentration, resulting in their equal distribution across the region as a whole.
Because the salt concentration is highest at the seaward end of the estuary and lowest at the river end, this movement of molecules aids in the inward transport of salt to the estuary. Diffusion is affected by a variety of factors, including the concentration gradient, temperature, pressure, and the size of the molecules being diffused.
As a result, it can be difficult to control the rate at which diffusion occurs, particularly in natural environments like estuaries, which are constantly changing due to factors like tides, winds, and currents.
However, by monitoring these factors and adjusting them as necessary, scientists and engineers can help to maintain the health of estuaries like Delaware Bay by ensuring that the inward transport of salt is kept within a manageable range.
To know more about Diffusion, refer here:
https://brainly.com/question/94094#
#SPJ11
describe one potential disadvantage of planting and managing timber forests, especially in less-developed countries, as a solution to address global climate change
One potential disadvantage of planting and managing timber forests, especially in less-developed countries, as a solution to address global climate change is the risk of deforestation.
Deforestation is the phenomenon of loss of tree cover and forest area that occurs as a result of human activities or natural events. Clear-cutting, selective logging, and other forest management practices have the potential to damage forest ecosystems and reduce the overall biodiversity of the area.
Planting and managing timber forests, especially in less-developed countries, can be a challenge since these countries have fewer resources and less established infrastructures. Forest management requires extensive knowledge and experience, which may not be readily available in these regions. Additionally, local populations may be more inclined to rely on traditional land-use patterns, which may conflict with timber forest management.
Learn more about deforestation at https://brainly.com/question/579463
#SPJ11
the himalaya mountains were formed in a collision at a?
if the area of the base is 30cm2 what is the prism
The volume of the prism is given as 300cm^3
What is the Volume of a Prism?A prism is a polyhedron in geometry that has n parallelogram faces that connect the n-sided polygon basis, the second base, which is a translated duplicate of the first base, and the n faces. The bases are translated into all cross-sections that are parallel to them.
The formula for the volume of a prism is V=Bh , where B is the base area and h is the height.
volume of prism = base area × height
volume = 30×10 = 300cm3
Read more about volume here:
https://brainly.com/question/1972490
#SPJ1
The base area of the prism is 30cm2
and its height is 10cm, then find its volume.
Which side of the mountain experiences low temperature?
The Windward side. The windward side is the side of the mountain that has the lower temperatures.
The windward side of the peak experiences more precipitation because warm air rises, which lowers the temperature. It will be cold outside at night and particularly in the winter. In the winter, especially at night, the interior temperature will be a little higher and less erratic. When you have $1,000 in the bank, use these 8 smart tactics. Leeward and windward are technical terms used in meteorology to describe the way the wind is blowing with respect to a particular point of reference. Some examples of these points of reference are boats at sea, islands, structures, and—as this piece will examine—mountains. The windward side of the reference point is always considered in all instances where the words are used.
learn more about mountain here:
https://brainly.com/question/10690247
#SPJ4