Kalia Runs competitively she would like to calculate her average running speed each time she runs which data should laila record in order to calculate her average running speed

molar heat of vaporization for liquid water is 40.6 kJ/mole. 15.54 kJ of energy is required to change 6.9 g of liquid water to steam if the water is already at 100°C.

To calculate the energy required to change 6.9 g of liquid water to steam, we need to use the formula:

q = n × ΔH_vap

where q is the energy required, n is the number of moles of water being vaporized, and ΔH_vap is the molar heat of vaporization for water, which is 40.6 kJ/mole.

First, we need to calculate the number of moles of water in 6.9 g of liquid water. We can do this using the molar mass of water, which is 18.015 g/mole:

n = m / M

n = 6.9 g / 18.015 g/mol

n = 0.383 moles

Now we can use this value of n and the molar heat of vaporization to calculate the energy required to vaporize the water:

q = n × ΔH_vap

q = 0.383 moles × 40.6 kJ/mole

q = 15.54 kJ

Learn more about vaporization here:

https://brainly.com/question/14578189

#SPJ1

The side chain of which amino acid is most likely to form a hydrogen bond with the side chain of glutamate is: lysine.

The side chain of lysine is most likely to form a hydrogen bond with the side chain of glutamate. Lysine and glutamate are both amino acids. Amino acids are the building blocks of proteins. The two side chains of amino acids can interact via hydrogen bonding.

A hydrogen bond is a non-covalent interaction between two electronegative atoms in which hydrogen is bonded to one atom and electronegative (N, O, or F) is bonded to another atom. These types of interactions are crucial in the stabilization of proteins and nucleic acids.

Amino acids that interact via hydrogen bonding play a key role in stabilizing the three-dimensional structure of proteins. Proteins can be stabilized by hydrogen bonding in a variety of ways, including within the polypeptide backbone, between the polypeptide backbone and side chains, and between two side chains.

To know more about "Amino acid" refer here:

https://brainly.com/question/16734198#

#SPJ11

Answer to the question : D.                                                            

Answer:

my answer is C. having mass and taking space

A potion that can cause boils if brewed incorrectly is an alchemical brew known as a Philter of boils

When brewed incorrectly, this potion causes painful boils to appear on the skin of the drinker. Properly brewed, this philter can be used to treat skin ailments such as eczema, psoriasis, and acne. However, the incorrect brewing of this potion can cause serious harm, resulting in painful and inflamed boils. To ensure the correct brewing of a philter of boils, it is important to follow the recipe closely, using only fresh ingredients. Careful measurements must also be taken, as incorrect amounts of certain ingredients can also cause boils. Finally, the philter must be stirred and boiled for a set amount of time. Any mistakes during this process can result in the creation of a hazardous potion.

In conclusion, a philter of boils is an alchemical potion that can cause painful boils if not brewed correctly. To ensure that the potion is brewed correctly, the recipe must be followed closely, and all measurements and times must be strictly adhered to.

Know more about boils  here:

https://brainly.com/question/29739800

#SPJ11

Rutherford's gold foil exploration showed that the particle is generally unfilled space with a small, thick, emphatically charged core. In view of these outcomes, Rutherford proposed the nuclear model of the particle.

The following pivotal examination throughout the entire existence of the iota was performed by Ernest Rutherford, a physicist from New Zealand who burned through a large portion of his vocation in Britain and Canada. In his popular gold foil try, Rutherford terminated a meager light emission

αalpha particles (articulated alpha particles) at an extremely slight sheet of unadulterated gold. Alpha particles are helium cores

[tex](24He)^2( 24He)^2[/tex], begin addendum, 2, end addendum, begin superscript, 4, end superscript, begin a text, H, e, end text, begin superscript, 2, or more, end superscript, right enclosure, and they are radiated in different radioactive rot processes. For this situation, Rutherford set an example of radium (a radioactive metal) inside a lead confine with a little pinhole it. The majority of the radiation was consumed by the lead, however, slim light emission particles got away from out of the pinhole toward the gold foil. The gold foil was encircled by an indicator screen that would streak when hit with an αalpha molecule.

to know more about the nuclear model click here:

https://brainly.com/question/18521318

#SPJ4

The SrF₂ solution has a molarity of 1.46 M.

To calculate the molarity of a solution, we need to know the number of moles of solute (in this case, SrF₂) and the volume of the solution in liters.

Given that we have a 26.93 mole sample of SrF₂, we can use the formula:

Molarity = Number of moles of solute / Volume of solution in liters

To find the molarity of the solution. However, we need to first determine the number of moles of SrF₂ in the solution. To do this, we can use the equation:

moles of solute = (mass of solute / molar mass of solute)

We are not given the mass of the sample, but we are given that it is used to make 18.5 L of a solution. This implies that the entire 26.93 mole sample is dissolved in 18.5 L of solution.

Therefore, we can assume that the mass of SrF₂ in the solution is equal to the mass of the original sample, which we can calculate using the molar mass of SrF₂:

molar mass of SrF₂ = 87.62 + (2 × 18.99) = 125.6 g/mol

mass of sample = number of moles × molar mass = 26.93 mol × 125.6 g/mol = 3,387 g

Now that we know the mass of SrF₂ in the solution, we can calculate the molarity using the above formula:

Molarity = Number of moles of solute / Volume of solution in liters

Number of moles of solute = mass of solute / molar mass of solute = 3,387 g / 125.6 g/mol = 26.96 mol

Molarity = 26.96 mol / 18.5 L = 1.46 M

Therefore, the molarity of the SrF₂ solution is 1.46 M.

To learn more about molarity refer to:

brainly.com/question/8732513

#SPJ4

The density of the gas is 0.00015875 g/mL.

To determine the density of the gas, we need to divide its mass by its volume. The volume of the room can be calculated by multiplying its length, width, and height: 2.00 m x 2.00 m x 5.00 m = 20.00 m³

Therefore, the density of the gas is:

Density = mass / volume

Density = 3175 g / 20.00 m³

Density = 158.75 g/m³

We can convert this to g/mL by recognizing that 1 mL is equivalent to 1 cm³. We can convert cubic meters to cubic centimeters by multiplying by 1,000,000. Thus, the volume of the room is 20,000,000 mL.

Therefore, the density of the gas in g/mL is:

Density = mass / volume

Density = 3175 g / 20,000,000 mL

Density = 0.00015875 g/mL

So, the gas has a density of 0.00015875 g/mL.

To learn more about mass refer to:

brainly.com/question/10763961

#SPJ4

Answer:

molten

Explanation:

Lava is molten rock that breaks through the earth's surface

Lava is molten rock.

Lava is a molten rock flowing from volcano. It belongs to the category of igneous rocks.

Igneous rocks are one of the three main types of rocks, and are formed when molten material, either magma or lava, solidifies. These rocks are made up of a variety of minerals, and the cooling process determines their physical properties.

Depending on how quickly the molten material cools, the texture of the igneous rock can range from fine-grained to coarse-grained. Igneous rocks can be further classified based on the silica content, with the most common classifications being felsic, intermediate, mafic, and ultramafic.

To know more about lava here

https://brainly.com/question/31182554

#SPJ2

The rotational constant, B, of a molecule depends on its deuterated molecule mass and bond length. Isotopic exchange can change both of these parameters and therefore alter the rotational spectra of a molecule.

For the deuterated molecule, D79Br, the reduced mass will increase because the mass of the hydrogen atom is replaced with the heavier deuterium atom. The bond length is not expected to change significantly. The increased reduced mass will result in a decrease in the rotational constant, B, compared to H79Br.

For the bromine exchanged molecule, H81Br, the reduced mass is expected to be similar to that of H79Br, but the bond length will be longer due to the larger size of the 81Br isotope. The longer bond length will result in a decrease in the rotational constant, B, compared to H79Br.

Isotopic exchange generally decreases the rotational constant, B, because it increases the reduced mass or changes the bond length. The exchange of 1H or 79Br has a greater effect on the rotational spectra of a molecule depends on their relative contribution to the reduced mass and bond length of the molecule. In the case of H79Br, the bond length is largely determined by the H-Br bond, so the exchange of 79Br has a greater effect on the rotational spectra than the exchange of 1H. However, the effect of isotopic exchange on the rotational spectra can be complex and may also depend on other factors, such as the electronic structure of the molecule.

To learn more about deuterated molecule refer to:

brainly.com/question/28464502

#SPJ4

If the combustion reaction is reversible, the likely magnitude of the equilibrium constant, Kc would depend on the stoichiometric coefficients of the reactants and products involved in the reversible reaction, as well as the temperature and pressure conditions of the reaction.

If a combustion reaction was a reversible reaction, the likely magnitude of the equilibrium constant, Kc would be determined by the equation below:

Kc = [C]^c [D]^d / [A]^a [B]^b

Where A, B, C, and D are the reactants and products of the reversible reaction, and a, b, c, and d are their corresponding stoichiometric coefficients. Since hydrogen is used as a rocket fuel because it is very light and reacts explosively and completely with oxygen, its combustion reaction with oxygen is an exothermic reaction, and the combustion of hydrogen and oxygen is not a reversible reaction. It can be represented by the following equation:

2H2 + O2 → 2H2O

However, if the combustion reaction is reversible, the likely magnitude of the equilibrium constant, Kc would depend on the stoichiometric coefficients of the reactants and products involved in the reversible reaction, as well as the temperature and pressure conditions of the reaction.

Know more about equilibrium constant

https://brainly.com/question/3159758

#SPJ11

The Diels-Alder mechanism between a diene and a dienophile is concerted, which means that bond breaking happens simultaneously as bond forming. To help the mechanism succeed, the diene should have an electron-donating group and the dienophile should have an electron-withdrawing group.

Diels-Alder reaction is a [1,4]-electrocyclic reaction. It includes the formation of a cyclic molecule with six carbons. It's a concerted reaction where the reaction occurs simultaneously in a single step. The dienophile and diene are the two reactants.

The diene is a hydrocarbon with two double bonds, while the dienophile is a substance with one double bond that is rich in electrons. The concerted mechanism results from the electrocyclic addition of the dienophile to the diene and a single molecule are produced.

The diene is the nucleophile in this mechanism, whereas the dienophile is the electrophile in this mechanism. The reaction is best achieved when the dienophile has an electron-withdrawing group, and the diene has an electron-donating group. As a result, the Diels-Alder reaction is an excellent example of a stereoselective reaction.

The stereochemistry of the diene and dienophile determines the stereochemistry of the final product. The endo-product is generated when the dienophile and diene groups are near to one another, and the exo-product is generated when they are far apart.

To know more about the dienophile refer here:

https://brainly.com/question/29972519#

#SPJ11

The intermolecular forces present in each of the substances are:

1. CH4 (Methane) - Dispersion forces only
2. CH3OH (Methanol) - Dispersion forces, dipole-dipole forces, and hydrogen bonding
3. HOCH2CH2OH (Ethylene glycol) - Dispersion forces, dipole-dipole forces, and hydrogen bonding
4. HCN (Hydrogen cyanide) - Dispersion forces and dipole-dipole forces. Dipole-dipole interactions are attractive forces among polar molecules. Polar molecules have permanent dipoles that are formed due to differences in the electronegativities of the atoms that are associated with a covalent bond.

Learn more  about intermolecular forces here: https://brainly.com/question/25902447

#SPJ11

The coefficient of P2O5 in the balanced equation is 1.

To balance the given chemical equation:

P2O5 + H2O -> H3PO4

Step 1: Balance the phosphorus (P) atoms:
Since there are 2 P atoms in P2O5 and 1 P atom in H3PO4, multiply H3PO4 by 2 to balance the P atoms.

P2O5 + H2O -> 2H3PO4

Step 2: Balance the oxygen (O) atoms:
There are 5 O atoms in P2O5 and 8 O atoms in 2H3PO4. To balance the O atoms, multiply H2O by 4.

P2O5 + 4H2O -> 2H3PO4

Step 3: Balance the hydrogen (H) atoms:
There are 8 H atoms in 4H2O and 6 H atoms in 2H3PO4. The H atoms are already balanced.

The balanced equation is:

P2O5 + 4H2O -> 2H3PO4

The coefficient of P2O5 in the balanced equation is 1.

Know more about coefficients

https://brainly.com/question/1038771

#SPJ11

The percent mass of hydrogen in glucose is approximately 6.73%. The molar mass of glucose (C₆H₁₂O₆) can be calculated as follows:

Molar mass of C₆H₁₂O₆ = (6 x atomic mass of carbon) + (12 x atomic mass of hydrogen) + (6 x atomic mass of oxygen)

= (6 x 12.01 g/mol) + (12 x 1.01 g/mol) + (6 x 16.00 g/mol)

= 72.06 g/mol + 12.12 g/mol + 96.00 g/mol

= 180.18 g/mol

The mass of hydrogen in one molecule of glucose is 12 x 1.01 g/mol = 12.12 g/mol.

To calculate the percent mass of hydrogen in glucose, we can use the following formula:

Percent mass of hydrogen = (mass of hydrogen / molar mass of glucose) x 100%

Substituting the values, we get:

Percent mass of hydrogen = (12.12 g/mol / 180.18 g/mol) x 100%

= 6.73%

Therefore, the percent mass of hydrogen in glucose is approximately 6.73%.

Learn more about glucose here brainly.com/question/2396657

#SPJ4

Being the best fit for the situation at hand can aid in supremacy. Plant A therefore dominance the other plants.

The most plentiful producers in the environment are dominant primary producers. Savanna grass is a prime illustration of a dominant primary producer. Keystone species, on the other hand, are by definition those that play a significant role in maintaining the ecosystem's balance despite not being particularly numerous.

According to Mendel's law of dominance, only one version of a trait will manifest in the offspring of two parents who have distinct, opposing traits. The only trait in the phenotype that the hybrid progeny will display is the dominant trait.

To know more about dominance visit:-

https://brainly.com/question/14053639

#SPJ1

Answer:

checking g down to jajrsw

Explanation:

Metallic behavior correlates with large atomic size and low ionization energy. This is true. In metallic behavior, a metal atom tends to lose electrons easily and form positive ions. When these atoms are packed together in a solid metal, they form a lattice that consists of positively charged ions and free electrons, which are free to move throughout the lattice.

When atoms have low ionization energies, it is easier for them to lose electrons and become positive ions. So, large atomic size and low ionization energy can lead to metallic behavior. A larger atomic size means that there is more distance between the nucleus and the outermost electrons. This means that the valence electrons are not as strongly attracted to the nucleus, and it is easier for them to be removed. Low ionization energy means that the energy required to remove an electron from an atom is low. So, when an atom with low ionization energy is in contact with another atom, it tends to lose electrons easily and become a positive ion. This positive ion then attracts the electrons from the other atom, forming a metallic bond. Thus, metallic behavior correlates with large atomic size and low ionization energy. This is because these properties make it easier for metal atoms to lose electrons and become positive ions, leading to metallic bonding.

for more such questions on  ionization.

https://brainly.com/question/29441502

#SPJ11

Answer:

Atomic mass is somthng else

Explanation:

To find the atomic mass you need ur periodic table

Based on its pH level, human saliva is neither acidic nor basic. Instead, it is considered to be a neutral substance. The pH scale measures the degree of acidity or alkalinity of a substance, with a range of 0 to 14. Acidic substances have pH values less than 7, basic substances have pH values greater than 7, and neutral substances have pH values equal to 7.Therefore, among the given substances, the acid is the detergent, which has a pH of 10.

Detergents are typically alkaline, which means they have a pH value greater than 7, making them basic. Furthermore, sea water, with a pH of 8.25, is also classified as a basic substance. Milk has a pH of 6.5, making it slightly acidic. Human saliva is a liquid that is secreted by the salivary glands in the mouth. It serves as a lubricant for food, making it easier to swallow. Saliva also contains enzymes that help break down food molecules. The pH of human saliva is usually around 7, making it neutral in nature. The pH of saliva, however, can vary depending on a number of factors, such as diet, medication, and the overall health of an individual. In conclusion, the acid is the detergent which has a pH of 10.

for more such questions on  alkalinity.

https://brainly.com/question/28987514

#SPJ11

The amount of water that crystallises is 305.1%.

Crystalization is a process of separating solid particles from a solution. It occurs when a solvent, such as water, is mixed with a solute, such as salt or sugar.The percentage of water of crystallization in 35.7g Na₂CO₃ 10 H₂O can be calculated using the following equation:

Percentage of water of crystallization =[tex](\frac{Mass of water of crystallization}{Mass of anhydrous salt}) * 100[/tex]

Mass of water of crystallization = 10 * (18.015 g/mol) = 180.15 g

Mass of anhydrous salt = (2 * (22.99 g/mol) + 1 * (12.01 g/mol)) = 58.97 g

The percentage of water of crystallization =[tex](\frac{180.15 g}{58.97 g}) * 100 = 305.1 \%.[/tex]

Therefore,The percentage of water of crystallization is 305.1%.

learn more about  anhydrous salt  Refer:brainly.com/question/8754605

#SPJ1

Given 10.5 g of oxygen consumed, the mass of water produced can be calculated using the balanced chemical equation and stoichiometry. The mass of water produced is 23.63 g.

The balanced chemical equation for the reaction between hydrogen and oxygen to form water is:

2H₂ + O₂ → 2H₂O

From this equation, we can see that 1 mole of oxygen reacts to produce 2 moles of water. The molar mass of oxygen is 16.00 g/mol, so 10.5 g of oxygen is:

10.5 g / 16.00 g/mol = 0.65625 mol of oxygen

According to the stoichiometry of the balanced chemical equation, 1 mole of oxygen reacts to produce 2 moles of water. Therefore, the number of moles of water produced is:

0.65625 mol of O₂ x (2 mol of H₂O / 1 mol of O₂) = 1.3125 mol of H₂O

The molar mass of water is 18.015 g/mol, so the mass of water produced is:

1.3125 mol of H₂O x 18.015 g/mol = 23.63 g of H₂O

Therefore, the mass of the produced water is 23.63 g.

To know more about oxygen please refer: https://brainly.com/question/29409999

#SPJ1

Explanation:

First, heat it from 55-100 C

11.8 g   ( 100 - 55) C  4.18 J / g C = 2219.6 J   = 2.22 kJ

Your heat of vaporization is in units of moles

   so 11.8 g of H2O =   11.8 gm / 18 gm /mole = .656 moles

Then

.656 moles * 40.6 kJ / mole = 26.6 kJ

Total kJ = 2.22 + 26.6 = 28.8 kJ

Each amino acid differs from others in the chemical structure of the R group. So the correct answer is option A.

Amino acids are molecules that are used as the building blocks of proteins. Each amino acid has an amine group (NH₂) and a carboxyl group (COOH) connected to a central carbon atom, as well as a specific side chain, known as the R group, which differentiates one amino acid from another. Therefore, an amino acid differs from others in the chemical structure of the R group. Twenty various amino acids are used to make proteins, all of which have slightly different chemical and physical characteristics, there are polar, nonpolar, and charged amino acids.

Learn more about amino acids: https://brainly.com/question/14351754

#SPJ11

The limiting reagent is TMSCl. This is because it is present in the smallest amount compared to all other reactants.

Amount is a noun used to describe the total number or quantity of something. It is used to refer to an aggregate of items, materials, or money. Amount can also be used figuratively to refer to an indefinite quantity that is not easily measured or counted. For example, one might say "there was an amount of people at the party".

Limiting reactants are the reactants that are used up first in a chemical reaction, and they limit the amount of product that can be formed. In this case, the amount of carvone and NaHCO3 (aq) is greater than the amount of TMSCl, so TMSCl is the limiting reactant.

To learn more about amount

https://brainly.com/question/29367909

#SPJ1

These next statements are true because of the Bohr model of the hydrogen atom:

These statements are true because of the Bohr model of the hydrogen atom. The Bohr model describes the way the electrons move in a hydrogen atom. This model shows that electrons are arranged in shells around the nucleus. Each shell corresponds to a specific energy level, and each energy level has a fixed circular orbit of the electron around the nucleus. When the electron is in the orbit closest to the nucleus, it has its lowest energy state.

When the electron absorbs a photon with energy equal to the new energy state, it moves to a higher energy state. Only certain energy levels are allowed within the hydrogen atom because electrons can only exist in specific energy levels.

Learn more about Bohr model: https://brainly.com/question/29194694

#SPJ11